MSA-1325: test

PENG-158 UBI should not allow undefined commands

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,110 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+    sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+    log.trace parent.off(this)
+    sendEvent(name: "switch", value: "off")
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,30 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health]($health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor that has 120min check-in interval
+
+
+
+
+
+

smartapps/-/-.src/-.groovy

@@ -0,0 +1,50 @@
+/**
+ *  이혜진
+ *
+ *  Copyright 2016 Leehyejin
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "이혜진",
+    namespace: "이혜진",
+    author: "Leehyejin",
+    description: "test",
+    category: "",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -323,6 +323,8 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
+	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
+		return "Hue White Ambiance Bulb"
 	else
 		return null
 }

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {