Merge pull request #1199 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -274,6 +274,7 @@ private Map makeTemperatureResult(value) {
         name: 'temperature',
         value: "" + value,
         descriptionText: "${linkText} is ${value}°${temperatureScale}",
+        unit: temperatureScale
     ]
 }
 

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -254,7 +254,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -28,6 +28,7 @@ metadata {
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
+		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -352,7 +353,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -21,6 +21,8 @@ metadata {
 		capability "Sensor"
 		capability "Battery"
 
+		command "configureAfterSecure"
+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
 

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -47,6 +47,9 @@ metadata {
 
         command "everywhereJoin"
         command "everywhereLeave"
+
+        command "forceOff"
+        command "forceOn"
     }
 
     /**
@@ -64,8 +67,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -138,8 +143,22 @@ metadata {
  * one place.
  *
  */
-def off() { onAction("off") }
-def on() { onAction("on") }
+def off() {
+    if (device.currentState("switch")?.value == "on") {
+        onAction("off")
+    }
+}
+def forceOff() {
+    onAction("off")
+}
+def on() {
+    if (device.currentState("switch")?.value == "off") {
+        onAction("on")
+    }
+}
+def forceOn() {
+    onAction("on")
+}
 def volup() { onAction("volup") }
 def voldown() { onAction("voldown") }
 def preset1() { onAction("1") }
@@ -238,11 +257,11 @@ def onAction(String user, data=null) {
     def actions = null
     switch (user) {
         case "on":
-            actions = boseSetPowerState(true)
+            boseSetPowerState(true)
             break
         case "off":
             boseSetNowPlaying(null, "STANDBY")
-            actions = boseSetPowerState(false)
+            boseSetPowerState(false)
             break
         case "volume":
             actions = boseSetVolume(data)
@@ -747,8 +766,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +814,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -89,14 +89,17 @@ def parse(String description) {
 			log.debug "TEMP"
 			map.name = "temperature"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
 			map.value = getTemperature(descMap.value)
+			map.unit = temperatureScale
 		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
@@ -169,7 +172,7 @@ def setHeatingSetpoint(degrees) {
 
 		def degreesInteger = Math.round(degrees)
 		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
@@ -180,7 +183,7 @@ def setCoolingSetpoint(degrees) {
 	if (degrees != null) {
 		def degreesInteger = Math.round(degrees)
 		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger, "unit": temperatureScale)
 		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
 	}

devicetypes/smartthings/cree-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/cree-bulb.src/README.md

@@ -0,0 +1,36 @@
+# Connected Cree LED Bulb
+
+
+
+Works with: 
+
+* [Connected Cree LED Bulb](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*10 = 20 min
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Cree Connected LED Bulb Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204258280-Cree-Connected-LED-Bulb)

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,6 +23,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -66,6 +67,12 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -85,6 +92,21 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.levelRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
@@ -95,5 +117,6 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,7 +21,9 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x26"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -42,6 +44,10 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -70,11 +76,28 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "indicator", "refresh"])
+		details(["switch", "level", "refresh"])
 
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -202,19 +225,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on")
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+void indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off")
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+void indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never")
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+void indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {
@@ -224,4 +247,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -682,7 +682,7 @@ def setHeatingSetpoint(degrees) {
 	def temperatureScale = getTemperatureScale()
 
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
@@ -691,7 +691,7 @@ def setHeatingSetpoint(degrees) {
 
 def setCoolingSetpoint(degrees) {
 	def degreesInteger = degrees as Integer
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger, "unit":temperatureScale)
 	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
 	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
 

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -43,7 +43,7 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -51,7 +51,7 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+		details(["rich-control", "reset", "refresh"])
 	}
 }
 
@@ -75,118 +75,78 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	def value = [hue:20, saturation:2]
+	setAdjustedColor(value)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color input $value"
     }
 }
 
@@ -195,22 +155,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
 
 def verifyPercent(percent) {
     if (percent == null)

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,8 +7,13 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		attribute "serialNumber", "string"
 		attribute "networkAddress", "string"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
+		attribute "status", "string"
+		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
+		// This is also used in the Hue application as ID
+		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -17,22 +22,23 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
-	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
+	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
-	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
-	            attributeState "default", label:'SN: ${currentValue}'
 			}
-        }
-		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
-			state "default", label:'SN: ${currentValue}'
+		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'If removed, Hue lights will not work properly'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
+		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'ID: ${currentValue}'
+		}
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'IP: ${currentValue}'
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "networkAddress"])
+		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
 	}
 }
 
@@ -56,7 +62,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-        	log.trace "Parsing description"
+			log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -66,13 +72,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-                        if (parent.state.inBulbDiscovery)
-                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
+					parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -43,16 +43,16 @@ metadata {
 			}
 		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
+    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        state "colorTemperature", action:"color temperature.setColorTemperature"
+    }
 
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
+    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        state "colorTemperature", label: 'WHITES'
+    }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -84,118 +84,86 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	setColorTemperature(4000)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
+        log.warn "Invalid color input $value"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setColorTemperature(this, value)
     } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color temperature $value"
     }
 }
 
@@ -204,23 +172,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
-
 def verifyPercent(percent) {
     if (percent == null)
         return false

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -68,20 +68,16 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
-		sendEvent(name: "level", value: percent)
-		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -0,0 +1,103 @@
+/**
+ *  Hue White Ambiance Bulb
+ *
+ *  Philips Hue Type "Color Temperature Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+    // Automatically generated. Make future change here.
+    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
+        capability "Switch Level"
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Switch"
+        capability "Refresh"
+
+        command "refresh"
+    }
+
+    simulator {
+        // TODO: define status and reply messages here
+    }
+
+    tiles (scale: 2){
+        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: 'WHITES'
+        }
+
+        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["rich-control"])
+        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// parse events into attributes
+def parse(description) {
+    log.debug "parse() - $description"
+    def results = []
+
+    def map = description
+    if (description instanceof String)  {
+        log.debug "Hue Ambience Bulb stringToMap - ${map}"
+        map = stringToMap(description)
+    }
+
+    if (map?.name && map?.value) {
+        results << createEvent(name: "${map?.name}", value: "${map?.value}")
+    }
+    results
+}
+
+// handle commands
+void on() {
+    log.trace parent.on(this)
+}
+
+void off() {
+    log.trace parent.off(this)
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (percent != null && percent >= 0 && percent <= 100) {
+        log.trace parent.setLevel(this, percent)
+    } else {
+        log.warn "$percent is not 0-100"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        log.trace parent.setColorTemperature(this, value)
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -143,51 +144,14 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0030': // Closed/No Motion/Dry
-            log.debug 'no motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-        case '0x0032': // Open/Motion/Wet
-            log.debug 'motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
+	resultMap.name = 'motion'
+	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
-        case '0x0032': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0033': // Battery Alarm
-            break
-
-        case '0x0034': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
-
-        case '0x0035': // Restore Report
-            break
-
-        case '0x0036': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0038': // Test Mode
-            break
-    }
-    return resultMap
+	return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,7 +13,10 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -219,40 +222,33 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	List parsedMsg = description.split(" ")
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	log.debug "parseIasMessage: $description"
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	// Relevant bit field definitions from ZigBee spec
-	def BATTERY_BIT = ( 1 << 3 )
-	def TROUBLE_BIT = ( 1 << 6 )
-	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
-
-	// Convert hex string to integer
-	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
-
-	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
+	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zoneStatus & TROUBLE_BIT) {
+	 if (zs.isTroubleSet()) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zoneStatus & BATTERY_BIT) {
+		 if (zs.isBatterySet()) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -270,9 +266,6 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
-	resultMap_sensor.name = "contact"
-	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
-
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -0,0 +1,38 @@
+# SmartPower Outlet
+
+
+
+Works with: 
+
+* [Samsung SmartPower Outlet](https://shop.smartthings.com/#!/products/smartpower-outlet)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Actuator** - represents that a Device has commands
+* **Switch** - can detect state (possible values: on/off)
+* **Refresh** - _refresh()_ command for status updates
+* **Power Meter** - detects power meter for device in either w or kw.
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C1 smart power outlet with maxReportTime of 10 min.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*10 = 20 min
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following links
+for the different models:
+* [SmartPower Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/201084854-SmartPower-Outlet)
+* [Samsung SmartThings Outlet Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957620)

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastActivity == null){
+				state.lastActivity = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+			}
+			state.lastActivity = now()
 		}
 	}
 	else {
@@ -116,13 +122,27 @@ def off() {
 def on() {
 	zigbee.on()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.onOffRefresh()
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
+	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -0,0 +1,44 @@
+# Smartsense Moisture Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Moisture Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-water-leak-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 moisture sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*60 = 120 min
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202847044-SmartSense-Moisture-Sensor)
+* [Samsung SmartThings Water Leak Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957630)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Water Leak Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -98,6 +101,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -169,42 +179,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0022': // Tamper Alarm
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
 def getTemperature(value) {
@@ -255,7 +232,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -281,7 +259,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -300,6 +279,21 @@ private Map getMoistureResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -311,7 +305,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -0,0 +1,45 @@
+# Smartsense Motion Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Motion Sensor** - can detect motion
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 motion sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*60 = 120 min
+
+## Battery Specification
+
+One CR2477 (for Samsung SmartThings Motion Sensor) / CR123A (SmartSense Motion Sensor) 3V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [SmartSense Motion Sensor (original model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903280-SmartSense-Motion-Sensor-original-model-)
+* [SmartSense Motion Sensor (2014 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203077520-SmartSense-Motion-Sensor-2014-model-)
+* [Samsung SmartThings Motion Sensor (2015 model) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205957580-Samsung-SmartThings-Motion-Sensor-2015-model-)
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Motion Sensor is stuck showing "Motion Detected" or "No Motion"](https://support.smartthings.com/hc/en-us/articles/200961130-Troubleshooting-Samsung-SmartThings-Motion-Sensor-is-stuck-showing-Motion-Detected-or-No-Motion-)
+* [Troubleshooting: Samsung SmartThings Motion Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -102,6 +105,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -182,44 +192,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0025': // Restore Report
-			break
-
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -271,7 +247,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -297,7 +274,8 @@ private Map getTemperatureResult(value) {
 		name: 'temperature',
 		value: value,
 		descriptionText: descriptionText,
-        translatable: true
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -312,6 +290,21 @@ private Map getMotionResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else { 
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -323,7 +316,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,6 +15,7 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +25,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +74,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +129,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +142,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +154,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -168,44 +169,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0025': // Restore Report
-            break
-
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -240,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}
@@ -260,7 +226,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -0,0 +1,45 @@
+# Smartsense Multi Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Multi Sensor](https://shop.smartthings.com/#!/products/smartsense-multi)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Three Axis** - monitors the state of a single axis
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Sensor** - detects sensor events
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Acceleration Sensor** - allows for acceleration detection.
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 multi sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*60 = 120 min
+
+## Battery Specification
+
+One CR2450 (for Samsung SmartThings Multipurpose Sensor) battery / Two AAAA (for SmartSense Multi Sensor) batteries required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor is stuck on "open" or "closed"](https://support.smartthings.com/hc/en-us/articles/200955940-Troubleshooting-Samsung-SmartThings-Multipurpose-Sensor-is-stuck-on-open-or-closed-)
+* [Troubleshooting: Temperature reading for the Samsung SmartThings Multipurpose Sensor is off](https://support.smartthings.com/hc/en-us/articles/200756845-Troubleshooting-Temperature-reading-for-the-Samsung-SmartThings-Multipurpose-Sensor-is-off)
+* [Troubleshooting: Samsung SmartThings Multipurpose Sensor won’t pair after removing pull-tab](https://support.smartthings.com/hc/en-us/articles/204966616-Troubleshooting-Samsung-SmartThings-device-won-t-pair-after-removing-pull-tab)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,6 +13,7 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -126,6 +127,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -224,47 +232,13 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+
 			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 			}
-		break
 
-		case '0x0021': // Open/Motion/Wet
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0022': // Tamper Alarm
-		break
-
-		case '0x0023': // Battery Alarm
-		break
-
-		case '0x0024': // Supervision Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
-
-		case '0x0025': // Restore Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0026': // Trouble/Failure
-		break
-
-		case '0x0028': // Test Mode
-		break
-	}
 	return resultMap
 }
 
@@ -338,7 +312,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -358,10 +333,11 @@ private Map getTemperatureResult(value) {
 			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText,
-    translatable: true
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
 	]
 }
 
@@ -396,6 +372,21 @@ private getAccelerationResult(numValue) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -403,78 +394,37 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig() +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,6 +14,7 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,6 +25,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -171,40 +173,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0022': // Tamper Alarm
-        break
-
-        case '0x0023': // Battery Alarm
-        break
-
-        case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0026': // Trouble/Failure
-        break
-
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {
@@ -234,7 +205,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 
@@ -251,9 +223,10 @@ def getTemperature(value) {
 		}
 		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
 		return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			unit: temperatureScale
 		]
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -0,0 +1,41 @@
+# Smartsense Open/Closed Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartThings Open/Closed Sensor](https://shop.smartthings.com/#!/packs/smartsense-open-closed-sensor/)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 open/closed sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*60 = 120 min
+
+## Battery Specification
+
+One CR2 3V battery required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [SmartSense Open/Closed Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202836844-SmartSense-Open-Closed-Sensor)

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,32 +13,35 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+		capability "Health Check"
+		capability "Sensor"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -71,10 +74,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +91,17 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +109,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,7 +135,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -135,14 +145,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -151,10 +161,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -165,42 +175,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -213,11 +191,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -228,7 +206,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -247,7 +226,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -262,6 +242,21 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -273,6 +268,7 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -0,0 +1,41 @@
+# SmartSense Temp/Humidity Sensor
+
+
+
+Works with: 
+
+* [Samsung SmartSense Temp/Humidity Sensor](https://shop.smartthings.com/#!/products/smartsense-temp-humidity-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Battery** - defines device uses a battery
+* **Relative Humidity Measurement** - defines device measures relative humidity
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - defines device measures current temperature
+* **Health Check** - indicates ability to get device health notifications
+* **Sensor** - detects sensor events
+
+## Device Health
+
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*60 = 120 min
+
+## Battery Specification
+
+One CR2 battery is required.
+
+## Troubleshooting
+
+If the sensor doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/203040294)

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -82,6 +83,13 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -205,7 +213,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -224,7 +233,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -237,6 +247,20 @@ private Map getHumidityResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -252,7 +276,7 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,6 +16,8 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,6 +1,8 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
+		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,6 +15,8 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
+		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
+		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,6 +16,8 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,6 +16,7 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
+		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,6 +16,8 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
+		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +22,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +59,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +126,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +148,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -161,42 +162,11 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +179,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +193,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -242,7 +213,8 @@ private Map getTemperatureResult(value) {
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+		unit: temperatureScale
 	]
 }
 
@@ -261,7 +233,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-    
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -274,24 +246,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
+
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -299,11 +271,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,8 +1,7 @@
 /**
- *  Iris Smart Fob
+ *  ZigBee Button
  *
  *  Copyright 2015 Mitch Pond
- *	Presence code adapted from SmartThings Arrival Sensor HA device type
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,181 +13,235 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
 metadata {
-	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-		capability "Battery"
-		capability "Button"
+    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Button"
         capability "Configuration"
-		capability "Presence Sensor"
-		capability "Sensor"
-        
-		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
-	}
-    
-    preferences{
-	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
-    		defaultValue: 3, displayDuringSetup: false)
-        input "checkInterval", "enum", title: "Presence timeout (minutes)",
-            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        input "logging", "bool", title: "Enable debug logging",
-            defaultValue: false, displayDuringSetup: false
+        capability "Refresh"
+        capability "Sensor"
+
+        command "enrollResponse"
+
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
-	tiles(scale: 2) {
-    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
-            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
-        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-        }
-		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
+    simulator {}
 
-		main (["presence"])
-		details(["presence","button","battery"])
-	}
+    preferences {
+        section {
+            input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"", defaultValue: 1, displayDuringSetup: false)
+        }
+    }
+
+    tiles {
+        standardTile("button", "device.button", width: 2, height: 2) {
+            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+        }
+
+        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main (["button"])
+        details(["button", "battery", "refresh"])
+    }
 }
 
 def parse(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-    logIt descMap
-    state.lastCheckin = now()
-    logIt "lastCheckin = ${state.lastCheckin}"
-    handlePresenceEvent(true)
-    
-	def results = []
-    if (description?.startsWith('catchall:'))
-		results = parseCatchAllMessage(descMap)
-	else if (description?.startsWith('read attr -'))
-		results = parseReportAttributeMessage(descMap)
-    else logIt(descMap, "trace")
-        
-	return results;
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+            def descMap = zigbee.parseDescriptionAsMap(description)
+            if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+                event = getBatteryResult(zigbee.convertHexToInt(descMap.value))
+            }
+            else if (descMap.clusterInt == 0x0006 || descMap.clusterInt == 0x0008) {
+                event = parseNonIasButtonMessage(descMap)
+            }
+        }
+        else if (description?.startsWith('zone status')) {
+            event = parseIasButtonMessage(description)
+        }
+
+        log.debug "Parse returned $event"
+        def result = event ? createEvent(event) : []
+
+        if (description?.startsWith('enroll request')) {
+            List cmds = enrollResponse()
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        }
+        return result
+    }
+}
+
+private Map parseIasButtonMessage(String description) {
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
+}
+
+private Map getBatteryResult(rawValue) {
+    log.debug 'Battery'
+    def volts = rawValue / 10
+    if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
+        return [:]
+    }
+    else {
+        def result = [
+                name: 'battery'
+        ]
+        def minVolts = 2.1
+        def maxVolts = 3.0
+        def pct = (volts - minVolts) / (maxVolts - minVolts)
+        result.value = Math.min(100, (int) pct * 100)
+        def linkText = getLinkText(device)
+        result.descriptionText = "${linkText} battery was ${result.value}%"
+        return result
+    }
+}
+
+private Map parseNonIasButtonMessage(Map descMap){
+    def buttonState = ""
+    def buttonNumber = 0
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
+            getButtonResult("press")
+        }
+        else if (descMap.command == "00") {
+            getButtonResult("release")
+        }
+    }
+    else if (descMap.clusterInt == 0x0006) {
+        buttonState = "pushed"
+        if (descMap.command == "01") {
+            buttonNumber = 1
+        }
+        else if (descMap.command == "00") {
+            buttonNumber = 2
+        }
+        if (buttonNumber !=0) {
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+        else {
+            return [:]
+        }
+    }
+    else if (descMap.clusterInt == 0x0008) {
+        if (descMap.command == "05") {
+            state.buttonNumber = 1
+            getButtonResult("press", 1)
+        }
+        else if (descMap.command == "01") {
+            state.buttonNumber = 2
+            getButtonResult("press", 2)
+        }
+        else if (descMap.command == "03") {
+            getButtonResult("release", state.buttonNumber)
+        }
+    }
+}
+
+def refresh() {
+    log.debug "Refreshing Battery"
+
+    return zigbee.readAttribute(0x0001, 0x20) +
+            zigbee.enrollResponse()
+}
+
+def configure() {
+    log.debug "Configuring Reporting, IAS CIE, and Bindings."
+    def cmds = []
+    if (device.getDataValue("model") == "3450-L") {
+        cmds << [
+                "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 300"
+        ]
+    }
+    return zigbee.onOffConfig() +
+            zigbee.levelConfig() +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
+            zigbee.enrollResponse() +
+            zigbee.readAttribute(0x0001, 0x20) +
+            cmds
+
+}
+
+private Map getButtonResult(buttonState, buttonNumber = 1) {
+    if (buttonState == 'release') {
+        log.debug "Button was value : $buttonState"
+        def timeDiff = now() - state.pressTime
+        log.info "timeDiff: $timeDiff"
+        def holdPreference = holdTime ?: 1
+        log.info "holdp1 : $holdPreference"
+        holdPreference = (holdPreference as int) * 1000
+        log.info "holdp2 : $holdPreference"
+        if (timeDiff > 10000) {         //timeDiff>10sec check for refresh sending release value causing actions to be executed
+            return [:]
+        }
+        else {
+            if (timeDiff < holdPreference) {
+                buttonState = "pushed"
+            }
+            else {
+                buttonState = "held"
+            }
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+    }
+    else if (buttonState == 'press') {
+        log.debug "Button was value : $buttonState"
+        state.pressTime = now()
+        log.info "presstime: ${state.pressTime}"
+        return [:]
+    }
+}
+
+def installed() {
+    initialize()
 }
 
 def updated() {
-	startTimer()
-    configure()
+    initialize()
 }
 
-def configure(){
-	logIt "Configuring Smart Fob..."
-	[
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
-    ] +
-    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
-}
-
-def parseCatchAllMessage(descMap) {
-    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
-    	handleButtonPress(descMap.sourceEndpoint as int)
-    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
-    	handleButtonRelease(descMap.sourceEndpoint as int)
-    else logIt("Parse: Unhandled message: ${descMap}","trace")
-}
-
-def parseReportAttributeMessage(descMap) {
-	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
-    else logIt descMap
-}
-
-private createBatteryEvent(percent) {
-	logIt "Battery level at " + percent
-	return createEvent([name: "battery", value: percent])
-}
-
-//this method determines if a press should count as a push or a hold and returns the relevant event type
-private handleButtonRelease(button) {
-	logIt "lastPress state variable: ${state.lastPress}"
-    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
-    
-    if (!state.lastPress) return sequenceError()
-	else if (state.lastPress.button != button) return sequenceError()
-    
-    def currentTime = now()
-    def startOfPress = state.lastPress?.time
-    def timeDif = currentTime - startOfPress
-    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
-    
-    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
-    
-    if (timeDif < 0) 
-    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
-    	return sequenceError()
-    else if (timeDif < holdTimeMillisec)
-    	return createButtonEvent(button,"pushed")
-    else 
-    	return createButtonEvent(button,"held")
-}
-
-private handleButtonPress(button) {
-	state.lastPress = [button: button, time: now()]
-}
-
-private createButtonEvent(button,action) {
-	logIt "Button ${button} ${action}"
-	return createEvent([
-    	name: "button",
-        value: action, 
-        data:[buttonNumber: button], 
-        descriptionText: "${device.displayName} button ${button} was ${action}",
-        isStateChange: true, 
-        displayed: true])
-}
-
-private getBatteryLevel(rawValue) {
-	def intValue = Integer.parseInt(rawValue,16)
-	def min = 2.1
-    def max = 3.0
-    def vBatt = intValue / 10
-    return ((vBatt - min) / (max - min) * 100) as int
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        logIt "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        logIt "Sensor is not present"
-        stopTimer()
+def initialize() {
+    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
+        sendEvent(name: "numberOfButtons", value: 2)
     }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    logIt "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    logIt "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    logIt "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
+    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
+            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+        sendEvent(name: "numberOfButtons", value: 1)
     }
+    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+    else {
+        //default. can be changed
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+
 }
-
-// ****** Utility functions ******
-
-private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -19,6 +19,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -53,7 +54,16 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -72,6 +82,20 @@ def on() {
 def setLevel(value) {
     zigbee.setLevel(value)
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
@@ -79,5 +103,7 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -27,6 +27,10 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
+
+        attribute "colorName", "string"
+        command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
@@ -54,15 +58,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -78,10 +82,22 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.debug event
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -90,11 +106,11 @@ def parse(String description) {
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
                 def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
                 def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
         else {
@@ -110,20 +126,54 @@ def on() {
 def off() {
     zigbee.off()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
 
 def refresh() {
-    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
+    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}
+
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,100 +11,133 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-/*
- * Capabilities
- * - Battery
- * - Configuration
- * - Refresh
- * - Switch
- * - Valve
-*/
 
 metadata {
-	definition (name: "Zigbee Valve", namespace: "smartthings", author: "SmartThings") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Valve"
+    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Configuration"
+        capability "Power Source"
+        capability "Refresh"
+        capability "Valve"
 
-		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0020,0006,0B02", outClusters: "0003"
-	}
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0006, 0020, 0B02, FC02", outClusters: "0019", manufacturer: "WAXMAN", model: "leakSMART Water Valve v2.10", deviceJoinName: "leakSMART Valve"
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0004, 0005, 0006, 0008, 000F, 0020, 0B02", outClusters: "0003, 0019", manufacturer: "WAXMAN", model: "House Water Valve - MDL-TBD", deviceJoinName: "Waxman House Water Valve"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: 'closed', action: "switch.on", icon: "st.Outdoor.outdoor16", backgroundColor: "#e86d13"
-			state "on", label: 'open', action: "switch.off", icon: "st.Outdoor.outdoor16", backgroundColor: "#53a7c0"
-		}
-		main "switch"
-		details(["switch"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+                attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+                attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+            }
+            tileAttribute ("powerSource", key: "SECONDARY_CONTROL") {
+                attributeState "powerSource", label:'Power Source: ${currentValue}'
+            }
+        }
+
+        valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["valve"])
+        details(["valve", "battery", "refresh"])
+    }
 }
 
+private getCLUSTER_BASIC() { 0x0000 }
+private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
+private getCLUSTER_POWER() { 0x0001 }
+private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.info description
-	if (description?.startsWith("catchall:")) {
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-        def msg = zigbee.parse(description)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-		log.trace msg
-		log.trace "data: $msg.data"
-	}
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
-
-// Commands to device
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-}
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if(event.name == "switch") {
+            event.name = "contact"                  //0006 cluster in valve is tied to contact
+            if(event.value == "on") {
+                event.value = "open"
+            }
+            else if(event.value == "off") {
+                event.value = "closed"
+            }
+        }
+        sendEvent(event)
+    }
+    else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap.clusterInt == CLUSTER_BASIC && descMap.attrInt == BASIC_ATTR_POWER_SOURCE){
+            def value = descMap.value
+            if (value == "01" || value == "02") {
+                sendEvent(name: "powerSource", value: "Mains")
+            }
+            else if (value == "03") {
+                sendEvent(name: "powerSource", value: "Battery")
+            }
+            else if (value == "04") {
+                sendEvent(name: "powerSource", value: "DC")
+            }
+            else {
+                sendEvent(name: "powerSource", value: "Unknown")
+            }
+        }
+        else if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
+            event.name = "battery"
+            event.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
+            sendEvent(event)
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug descMap
+        }
+    }
 }
 
 def open() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    zigbee.on()
 }
 
 def close() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    zigbee.off()
 }
 
 def refresh() {
-	log.debug "sending refresh command"
-	"st rattr 0x${device.deviceNetworkId} 1 6 0"
+    log.debug "refresh called"
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {
-
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}"
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -22,6 +22,7 @@ metadata {
         capability "Actuator"
         capability "Color Temperature"
         capability "Configuration"
+        capability "Health Check"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -35,6 +36,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -49,9 +51,6 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -61,12 +60,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -75,7 +74,19 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -95,12 +106,29 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -0,0 +1,205 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
+	}
+
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+		status "09%": "command: 2003, payload: 09"
+		status "10%": "command: 2003, payload: 0A"
+		status "33%": "command: 2003, payload: 21"
+		status "66%": "command: 2003, payload: 42"
+		status "99%": "command: 2003, payload: 63"
+
+		// reply messages
+		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
+		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
+		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
+		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
+		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
+		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		}
+
+		main(["switch"])
+		details(["switch", "level", "refresh"])
+
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description != "updated") {
+		log.debug "parse() >> zwave.parse($description)"
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value)]
+	if (cmd.value && cmd.value <= 100) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
+	}
+	return result
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport $cmd"
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	createEvent([name: "indicatorStatus", value: value])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def off() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def setLevel(value) {
+	log.debug "setLevel >> value: $value"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	if (level > 0) {
+		sendEvent(name: "switch", value: "on")
+	} else {
+		sendEvent(name: "switch", value: "off")
+	}
+	sendEvent(name: "level", value: level, unit: "%")
+	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def setLevel(value, duration) {
+	log.debug "setLevel >> value: $value, duration: $duration"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
+	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
+	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
+				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
+}
+
+def poll() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	log.debug "refresh() is called"
+	def commands = []
+	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
+	if (getDataValue("MSR") == null) {
+		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	}
+	delayBetween(commands,100)
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -36,6 +35,7 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -81,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -94,9 +94,9 @@ def updated() {
 }
 
 def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
 	], 6000)
 }
 
@@ -147,12 +147,11 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -170,12 +169,11 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
+		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
@@ -212,7 +210,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(batteryGetCommand())
+			result << response(command(zwave.batteryV1.batteryGet()))
 		}
 	}
 
@@ -220,7 +218,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -232,12 +230,16 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
 	}
-	cmd.format()
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
@@ -260,8 +262,12 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
 			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -0,0 +1,270 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
+		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["contact"])
+		details(["contact","battery"])
+	}
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
+		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
+		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
+		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
+		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
+		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
+		status "wake up" : "command: 9881, payload: 00 84 07"
+		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
+		status "battery low" : "command: 9881, payload: 00 80 03 FF"
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x84: 2,  // WakeUp
+		0x86: 1,  // Version
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if (!device.currentState("ManufacturerCode")) {
+				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			}
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+		}
+	} else if (cmd.notificationType) {
+		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -0,0 +1,327 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+				
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
+		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles {
+		standardTile("motion", "device.motion", width: 3, height: 2) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:"%"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery"])
+	}
+}
+
+def updated() {
+	if (!device.currentState("ManufacturerCode")) {
+		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x31: 5,  // SensorMultilevel
+		0x84: 2	  // WakeUp
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	def result = []
+	if (value) {
+		log.debug "sensorValueEvent($value) : active"
+		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
+	} else {
+		log.debug "sensorValueEvent($value) : inactive"
+		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x08) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0xFF) {
+			result << sensorValueEvent(1)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def result = []
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			break;
+		case 3:
+			map.name = "illuminance"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			break;
+		case 5:
+			map.name = "humidity"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = cmd.scale == 0 ? "%" : ""
+			break;
+		case 0x1E:
+			map.name = "loudness"
+			map.unit = cmd.scale == 1 ? "dBA" : "dB"
+			map.value = cmd.scaledSensorValue.toString()
+			break;
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	result << createEvent(map)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+	
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	if (manufacturerCode == "0109" && productTypeCode == "2002") {
+		result << response(secureSequence([
+			// Change re-trigger duration to 1 minute
+			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
+			zwave.batteryV1.batteryGet(),
+			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+		], 400))
+	}
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -0,0 +1,143 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+ 		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+
+	// tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	[name: "indicatorStatus", value: value, display: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def off() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def refresh() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -15,12 +15,15 @@ metadata {
 	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Indicator"
-		capability "Switch"
+ 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x25"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
 	// simulator metadata
@@ -33,6 +36,10 @@ metadata {
 		reply "200100,delay 100,2502": "command: 2503, payload: 00"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
@@ -52,10 +59,27 @@ metadata {
 		}
 
 		main "switch"
-		details(["switch","refresh","indicator"])
+		details(["switch","refresh"])
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -139,19 +163,19 @@ def refresh() {
 	])
 }
 
-def indicatorWhenOn() {
+void indicatorWhenOn() {
 	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
+void indicatorWhenOff() {
 	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
+void indicatorNever() {
 	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -24,17 +24,24 @@ definition(
     iconX3Url: "http://www.gidjit.com/appicon@3x.png",
     oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
 
+preferences(oauthPage: "deviceAuthorization") {
+    // deviceAuthorization page is simply the devices to authorize
+    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
+         install: false, uninstall: true) {
+  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
+    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+        }
 
-
-preferences {
-  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
-
-  }
+    }
+    page(name: "instructionPage", title: "Device Discovery", install: true) {
+        section() {
+            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
+        }
+    }
 }
+
 mappings {
   path("/structureinfo") {
     action: [

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def detail = state?.deviceDetail[deviceId]
+		def data = state?.deviceState[deviceId]
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,15 +25,11 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -46,4 +42,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/juano2310/jawbone-button-notifier.src/jawbone-button-notifier.groovy

@@ -62,7 +62,7 @@ def initialize() {
 }
 
 def sendit(evt) {
-	log.debug "$evt.value: $evt, $settings"
+	log.debug "$evt.value: $evt"
 	sendMessage()
 }
 
@@ -80,6 +80,6 @@ def sendMessage() {
         sendSms phone3, msg
     }
     if (!phone1 && !phone2 && !phone3) {
-    	sendPush msg    
+    	sendPush msg
     }
 }

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Medicine Management - Contact Sensor
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
+ * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
+ * --- ----- Once draw IS open, LED will return back to it's original color
+ *
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Contact Sensor",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+
+	section("My Medicine Draw/Cabinet"){
+		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
+	} 
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceContactSensor, "contact", contactHandler)
+
+    // how many minutes to look in the past from the reminder time, for an open draw
+    state.minutesToCheckOpenDraw = 60
+    
+    // is true when LED notification is set after exceeding 10 minutes past reminder time
+    state.ledNotificationTriggered = false
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkOpenDrawInPast)
+   
+}
+
+// Should turn off any LED notification on OPEN state
+def contactHandler(evt){
+	if (evt.value == "open") {
+        // if LED notification triggered, reset it.
+        log.debug "Cabinet opened"
+        if (state.ledNotificationTriggered) {
+            resetLEDNotification()
+        }
+	}
+}
+
+// If the draw was NOT opened within 60 minutes of the timer send notification out.
+def checkOpenDrawInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
+	log.debug "Cabinet found opened: $cabinetOpened"
+    
+    // if it's opened, then do nothing and assume they took their meds
+    if (!cabinetOpened) {    
+    	sendNotification("Hi, please remember to take your meds in the cabinet")
+       
+       // if no open activity, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
+    }
+}
+
+// If the draw was NOT opened after 10 minutes past reminder, use LED notification
+def checkOpenDrawAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def cabinetOpened = isOpened(10)    
+    
+   	log.debug "Cabinet found opened: $cabinetOpened"
+        
+    // if no open activity, blink lights
+    if (!cabinetOpened) {
+    	log.debug "Set LED to Notification color"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the sensor has been opened since the minutes entered
+// Return true if opened found, else false.
+def isOpened(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceContactSensor.eventsSince(previousDateTime)   
+    def cabinetOpened = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "open") {
+                cabinetOpened = true 
+            }
+        }
+	}
+    
+    return cabinetOpened
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	state.ledNotificationTriggered = true
+    
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+	state.ledNotificationTriggered = false
+    
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    if (state.origColor != null) {
+    	deviceLight.setHue(state.origColor)
+    }
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+
+}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Medicine Management - Temp-Motion
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- If temp > threshold set, send notification
+ * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
+ * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
+ * --- ----- Once motion is detected, LED will turn back to it's original color
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Temp-Motion",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+ 
+     section("My Medicine in the Refrigerator"){
+		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
+        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
+	} 
+
+	section("Temperature Threshold"){
+    	input "tempThreshold", "number", title: "Temperature Threshold"
+    }
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }    
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+	// will notify when temp exceeds max
+    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
+    
+    // how many minutes to look in the past from the reminder time
+    state.minutesToCheckPriorToReminder = 60
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkMotionInPast)
+}
+
+
+// If temp > 39 then send an app notification out.
+def tempHandler(evt){
+	if (evt.doubleValue > tempThreshold) {
+    	log.debug "Fridge temp of $evt.value exceeded threshold"
+   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
+	}
+}
+
+// Should turn off any LED notification once motion detected
+def motionHandler(evt){
+    // always call out to stop any possible LED notification
+	log.debug "Medication moved. Send stop LED notification"
+    resetLEDNotification()
+}
+
+// If no motion detected within 60 minutes of the timer send notification out.
+def checkMotionInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def movement = isMoved(state.minutesToCheckPriorToReminder)
+	log.debug "Motion found: $movement"
+    
+    // if there was movement, then do nothing and assume they took their meds
+    if (!movement) {    
+    	sendNotification("Hi, please remember to take your meds in the fridge")
+    
+        // if no movement, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkMotionAfterReminder)
+    }
+}
+
+// If still no movement after 10 minutes past reminder, use LED notification
+def checkMotionAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def movement = isMoved(10)    
+    
+   	log.debug "Motion found: $movement"
+        
+    // if no open activity, blink lights
+    if (!movement) {
+    	log.debug "Notify LED API"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the accelerometer has been activated since the minutes entered
+// Return true if active, else false.
+def isMoved(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
+    def motion = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "active") {
+                motion = true 
+            }
+        }
+	}
+    
+    return motion
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    deviceLight.setHue(state.origColor)
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+}

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -1,345 +0,0 @@
-/**
- *  SmartThings service for Prempoint
- *
- *  Author: Prempoint Inc. (c) 2016
- *   
- */
-definition(
-    name: "Prempoint",
-    namespace: "prempoint.com",
-    author: "Prempoint Inc.",
-    description: "SmartThings service for Prempoint",
-    category: "Connections",
-    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
-    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
-    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
-    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
-
-preferences {
-	section("Allow Prempoint to Control & Access These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
-        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
-        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/list") {
-		action: [
-			GET: "listDevices"
-		]
-	}
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-    path("/switches/:id/:command") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/switches/:id/:command/:level") {
-		action: [
-			GET: "updateSwitch"
-		]
-	}
-	path("/locks") {
-		action: [
-			GET: "listLocks"
-		]
-	}
-	path("/locks/:id") {
-		action: [
-			GET: "showLock"
-		]
-	}
-	path("/locks/:id/:command") {
-		action: [
-			GET: "updateLock"
-		]
-	}
-    path("/doors/:id") {
-		action: [
-			GET: "showDoor"
-		]
-	}
-   	path("/doors/:id/:command") {
-		action: [
-			GET: "updateDoor"
-		]
-	}
-	path("/garagedoors/:id") {
-		action: [
-			GET: "showGarageDoor"
-		]
-	}
-   	path("/garagedoors/:id/:command") {
-		action: [
-			GET: "updateGarageDoor"
-		]
-	}
-    path("/cameras/:id") {
-		action: [
-			GET: "showCamera"
-		]
-	}  
-    path("/cameras/:id/:command") {
-		action: [
-			GET: "updateCamera"
-		]
-	}  
-}
-
-def installed() {}
-
-def updated() {}
-
-def listDevices() {
-	log.debug "entering listDevices"
-    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
-    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
-}
-
-//switches
-def listSwitches() {
-    log.debug "entering listSwitches"
-	switches.collect{showDevice(it,"switch")}
-}
-
-def showSwitch() {
-	log.debug "entering showSwitches"
-	show(switches, "switch")
-}
-
-def updateSwitch() {
-	log.debug "entering updateSwitches"
-	update(switches, "switch")
-}
-
-//locks
-def listLocks() {
-	log.debug "entering listLocks"
-	locks.collect{showDevice(it,"lock")}
-}
-
-def showLock() {
-	log.debug "entering showLock"
-	show(locks, "lock")
-}
-
-def updateLock() {
-	log.debug "entering updateLock"
-	update(locks, "lock")
-}
-
-//doors
-def listDoors() {
-	log.debug "entering listDoors"
-	locks.collect{showDevice(it,"door")}
-}
-
-def showDoor() {
-	log.debug "entering showDoors"
-	show(doors, "door")
-}
-
-def updateDoor() {
-	log.debug "entering updateDoor"
-	update(doors, "door")
-}
-
-//garagedoors
-def listGarageDoors() {
-	log.debug "entering listGarageDoors"
-	locks.collect{showDevice(it,"garagedoor")}
-}
-
-def showGarageDoor() {
-	log.debug "entering showGarageDoors"
-	show(garagedoors, "garagedoor")
-}
-
-def updateGarageDoor() {
-	log.debug "entering updateGarageDoor"
-	update(gargedoors, "garagedoor")
-}
-
-//cameras
-def listCameras() {
-	log.debug "entering listCameras"
-	cameras.collect{showDevice(it,"image")}
-}
-
-def showCamera() {
-	log.debug "entering showCameras"
-	show(cameras, "camera")
-}
-
-def updateCamera() {
-	log.debug "entering updateCamera"
-	update(cameras, "camera")
-}
-
-def deviceHandler(evt) {}
-
-private update(devices, type) {
-	def rc = null
-
-	//def command = request.JSON?.command
-    def command = params.command
-    
-    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
-    
-    // Process the command.
-	if (command) 
-    {
-		def dev = devices.find { it.id == params.id }
-		if (!dev) {
-			httpError(404, "Device not found: $params.id")
-		} else if (type == "switch") {
-			switch(command) {
-			    case "on":
-			    	rc = dev.on()
-			    	break
-			    case "off":
-			    	rc = dev.off()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "lock") {
-			switch(command) {
-			    case "lock":
-			    	rc = dev.lock()
-			    	break
-			    case "unlock":
-			    	rc = dev.unlock()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
-			}
-		} else if (type == "door") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "garagedoor") {
-			switch(command) {
-			    case "open":
-			    	rc = dev.open()
-			    	break
-			    case "close":
-			    	rc = dev.close()
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		} else if (type == "camera") {
-			switch(command) {
-			    case "take":
-			    	rc = dev.take()
-			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
-			    	break
-			    default:
-			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
-			}
-		}
-
-		log.debug "executed device=$it.id $dev command=$command rc=$rc"
-        
-        // Check that the device is a switch that is currently on, supports 'setLevel"
-        // and that a level was specified.
-        int level = params.level ? params.level as int : -1;
-        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
-            log.debug "device about to setLevel=$level"
-            dev.setLevel(level);
-        }
-        
-        // Show the device info if necessary.
-        if (rc == null) {
-        	rc = showDevice(dev, type)
-        }
-	}
-    
-    return rc
-}
-
-private show(devices, type) {
-	def dev = devices.find { it.id == params.id }
-	if (!dev) {
-		httpError(404, "Device not found")
-	} else { 
-        // Show the device info.
-        showDevice(dev, type)
-	}
-}
-
-private showDevice(it, type) {
-	def props = null
-
-	// Get the current state for the device type.
-	def state = [it.currentState(type)]
-    
-	// Check that whether the a switch device with level support is located and update the returned device type.
-    def devType =  type
-    
-    if (type == "switch" && hasLevel(it)) {
-    	// Assign "switchWithLevel" to device type.
-    	devType = "switchWithLevel"
-        // Add the level state.
-        def levelState = it.currentState("level")
-        if (levelState) {
-        	state.add(levelState)
-        }
-    }
-    
-    log.debug "device label=$it.label type=$devType"
-    
-    // Assign the device item properties if appropriate.
-    if (it) {
-    	props = [id: it.id, label: it.label, type: devType, state: state]
-        // Add the hub information to the device properties
-        // if appropriate.
-        if (it.hub) {
-        	props.put("location", it.hub.hub.location)
-        }
-        if (it.currentImage) {
-        	props.put("currentImage", it.currentImage)
-        }
-    }
-    
-    return props
-}
-
-private hasLevel(device) {
-    // Default return value.
-    def rc = false;
-
-	// Get the device supported commands.
-    def supportedCommands = device.supportedCommands
-    
-    // Check to see if the "setLevel" was found and assign
-    // the appropriate return value.
-    if (supportedCommands) {
-        // Find the "setLevel" command. 
-        rc = supportedCommands.toString().indexOf("setLevel") != -1
-    }
-    
-    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
-            
-    return rc
-}

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -208,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to") {
+			input("recipients", "contact", title: "Send notifications to", required: false) {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-
-			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else {
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+				def hue = getHue(dimmer, nextLevel)
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -689,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
+	def totalRunTime = totalRunTimeMillis() ?: 1
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
+	return hasCommand(device, "setLevel")
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
-	device.supportedCommands.each {
-		if (it.name.contains("setColor")) {
-			hasColor = true
-		}
-	}
-	return hasColor
+	return hasCommand(device, "setColor")
+}
+
+private hasCommand(device, String command) {
+	return (device.supportedCommands.find { it.name == command } != null)
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting $phone1"
+            log.debug "Feeder was not opened since $midnight, texting one phone number"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -74,8 +74,6 @@ def authPage()
 
 		def redirectUrl = oauthInitUrl()
     
-  	  	log.debug "RedirectURL = ${redirectUrl}"
-
 		return dynamicPage(name: "Credentials", title: "Life360", nextPage:"listCirclesPage", uninstall: uninstallOption, install:false) {
 		    section {
     			href url:redirectUrl, style:"embedded", required:false, title:"Life360", description:description
@@ -257,8 +255,6 @@ def initializeLife360Connection() {
 	def oauthClientId = appSettings.clientId
 	def oauthClientSecret = appSettings.clientSecret
 
-	log.debug "Installed with settings: ${settings}"
-
 	initialize()
     
     def username = settings.username
@@ -269,8 +265,6 @@ def initializeLife360Connection() {
   	def basicCredentials = "${oauthClientId}:${oauthClientSecret}"
     def encodedCredentials = basicCredentials.encodeAsBase64().toString()
     
-    log.debug "Encoded Creds: ${encodedCredentials}"
-
     
     // call life360, get OAUTH token using password flow, save
     // curl -X POST -H "Authorization: Basic cFJFcXVnYWJSZXRyZTRFc3RldGhlcnVmcmVQdW1hbUV4dWNyRUh1YzptM2ZydXBSZXRSZXN3ZXJFQ2hBUHJFOTZxYWtFZHI0Vg==" 
@@ -284,8 +278,6 @@ def initializeLife360Connection() {
     				"username=${username}&"+
                     "password=${password}"
 
-    log.debug "Post Body: ${postBody}"
-	   
     def result = null
     
     try {
@@ -295,7 +287,6 @@ def initializeLife360Connection() {
 		}
         if (result.data.access_token) {
        		state.life360AccessToken = result.data.access_token
-       		log.debug "Access Token = ${state.life360AccessToken}"
             return true;
    		}
 		log.debug "Response=${result.data}"
@@ -533,8 +524,6 @@ def createCircleSubscription() {
         
     def postBody =  "url=${hookUrl}"
 
-    log.debug "Post Body: ${postBody}"
-	   
     def result = null
     
     try {
@@ -586,8 +575,6 @@ def updated() {
         
         	// log.debug "After Find Attempt."
 
-       		log.debug "Member Id = ${member.id}, Name = ${member.firstName} ${member.lastName}, Email Address = ${member.loginEmail}"
-        
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,29 +658,73 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-			}
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
+    if (device) {
+        if (validateCommand(device, command)) {
+            if (arguments) {
+                device."$command"(*arguments)
+            } else {
+                device."$command"()
+            }
+            render status: 204, data: "{}"
+        } else {
+          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+        }
+    } else {
+      render status: 404, data: '{"msg": "Device not found"}'
+    }
+  }
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(device)
+	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
 	}
 }
 
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(device) {
+    def capName = ""
+    if (switches.find{it.id == device.id})
+			capName = "Switch"
+		else if (alarms.find{it.id == device.id})
+			capName = "Alarm"
+		else if (locks.find{it.id == device.id})
+			capName = "Lock"
+    log.trace "Device: $device - Capability Name: $capName"
+		return capName
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -779,18 +823,33 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
+  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+  	sendHubCommand(new physicalgraph.device.HubAction(
+  		method: "POST",
+  		path: path,
+  		headers: [
+  			"Host": host,
+  			"Content-Type": "application/json"
+  		],
+  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+  	))
+  } else {
+    def params = [
+      uri: callbackUrl,
+      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+    ]
+    try {
+        log.debug "Sending data to Harmony Cloud: $params"
+        httpPostJson(params) { resp ->
+            log.debug "Harmony Cloud - Response: ${resp.status}"
+        }
+    } catch (e) {
+        log.error "Harmony Cloud - Something went wrong: $e"
+    }
+  }
 }
 
 def listHubs() {

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -48,9 +48,9 @@ preferences {
 	}
 	section("Via a push notification and/or an SMS message"){
 		input("recipients", "contact", title: "Send notifications to") {
-			input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+			input "phone", "phone", title: "Enter a phone number to get SMS", required: false
 			paragraph "If outside the US please make sure to enter the proper country code"
-			input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
+			input "pushAndPhone", "enum", title: "Notify me via Push Notification", required: false, options: ["Yes", "No"]
 		}
 	}
 	section("Minimum time between messages (optional, defaults to every message)") {
@@ -111,19 +111,24 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
-		if (!phone || pushAndPhone != 'No') {
-			log.debug 'sending push'
-			options.method = 'push'
-			//sendPush(msg)
-		}
 		if (phone) {
 			options.phone = phone
-			log.debug 'sending SMS'
-			//sendSms(phone, msg)
+			if (pushAndPhone != 'No') {
+				log.debug 'Sending push and SMS'
+				options.method = 'both'
+			} else {
+				log.debug 'Sending SMS'
+				options.method = 'phone'
+			}
+		} else if (pushAndPhone != 'No') {
+			log.debug 'Sending push'
+			options.method = 'push'
+		} else {
+			log.debug 'Sending nothing'
+			options.method = 'none'
 		}
 		sendNotification(msg, options)
 	}
-
 	if (frequency) {
 		state[evt.deviceId] = now()
 	}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLock",
-			POST: "updateLock"
+			PUT: "updateLocks",
+			POST: "updateLocks"
 		]
 	}
 	path("/locks/:id") {
@@ -442,31 +442,87 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
+	def type = params.param1
 	def command = request.JSON?.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	//def command = request.JSON?.command
-	def command = params.command
-	if (command)
-	{
-		command = command.toLowerCase()
-		def device = devices.find { it.id == params.id }
-		if (!device)
-		{
+	def type = params.param1
+	def command = request.JSON?.command
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
 			httpError(404, "Device not found")
-		}
-		else
-		{
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, type) {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,22 +92,87 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	if (command) {
-		devices."$command"()
+	def type = params.param1
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	if (command) {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	def type = params.param1
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
+		httpError(404, "Device not found")
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, name) {