MSA-1391: This app takes the events from a switch and uses them to toggle multiple outlets or other switches. The idea is to be able to leverage a physical switch to control multiple outlets to enable a whole room to turn on at the touch of a switch.

Rolling down staging hotfix to master

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -15,12 +15,13 @@
  */
  
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
+		capability "Health Check"
         
 		command "enrollResponse"
  
@@ -273,7 +274,8 @@ def refresh() {
 }
 
 def configure() {
-
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,8 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -82,22 +81,22 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }
 
 def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
 	], 6000)
 }
 
@@ -148,12 +147,11 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -171,14 +169,13 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
+		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }
@@ -213,7 +210,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(batteryGetCommand())
+			result << response(command(zwave.batteryV1.batteryGet()))
 		}
 	}
 
@@ -221,7 +218,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -233,12 +230,16 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
 	}
-	cmd.format()
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
@@ -261,12 +262,12 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
 			break
 		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
-			setDeviceType("Vision Motion Sensor Plus (SG)")
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
 			break
 	}
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -0,0 +1,270 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
+		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["contact"])
+		details(["contact","battery"])
+	}
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
+		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
+		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
+		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
+		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
+		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
+		status "wake up" : "command: 9881, payload: 00 84 07"
+		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
+		status "battery low" : "command: 9881, payload: 00 80 03 FF"
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x84: 2,  // WakeUp
+		0x86: 1,  // Version
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if (!device.currentState("ManufacturerCode")) {
+				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			}
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+		}
+	} else if (cmd.notificationType) {
+		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -0,0 +1,327 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+				
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
+		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles {
+		standardTile("motion", "device.motion", width: 3, height: 2) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:"%"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery"])
+	}
+}
+
+def updated() {
+	if (!device.currentState("ManufacturerCode")) {
+		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x31: 5,  // SensorMultilevel
+		0x84: 2	  // WakeUp
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	def result = []
+	if (value) {
+		log.debug "sensorValueEvent($value) : active"
+		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
+	} else {
+		log.debug "sensorValueEvent($value) : inactive"
+		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x08) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0xFF) {
+			result << sensorValueEvent(1)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def result = []
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			break;
+		case 3:
+			map.name = "illuminance"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			break;
+		case 5:
+			map.name = "humidity"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = cmd.scale == 0 ? "%" : ""
+			break;
+		case 0x1E:
+			map.name = "loudness"
+			map.unit = cmd.scale == 1 ? "dBA" : "dB"
+			map.value = cmd.scaledSensorValue.toString()
+			break;
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	result << createEvent(map)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+	
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	if (manufacturerCode == "0109" && productTypeCode == "2002") {
+		result << response(secureSequence([
+			// Change re-trigger duration to 1 minute
+			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
+			zwave.batteryV1.batteryGet(),
+			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+		], 400))
+	}
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -24,24 +24,17 @@ definition(
     iconX3Url: "http://www.gidjit.com/appicon@3x.png",
     oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
 
-preferences(oauthPage: "deviceAuthorization") {
-    // deviceAuthorization page is simply the devices to authorize
-    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
-         install: false, uninstall: true) {
-  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
-    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-        }
 
-    }
-    page(name: "instructionPage", title: "Device Discovery", install: true) {
-        section() {
-            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
-        }
-    }
+
+preferences {
+  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
+    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
+
+  }
 }
-
 mappings {
   path("/structureinfo") {
     action: [

smartapps/mdvickst/use-switch-to-control-outlets.src/use-switch-to-control-outlets.groovy

@@ -0,0 +1,61 @@
+/**
+ *  Use Switch to Control Outlets
+ *
+ *  Copyright 2016 Mark Vickstrom
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Use Switch to Control Outlets",
+    namespace: "mdvickst",
+    author: "Mark Vickstrom",
+    description: "Use a Switch to control multiple outlets",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Use this Switch") {
+		input "triggerSwitch", "capability.switch", title: "Which Switch?", required: true
+	}
+    section("To Control these Devices") {
+    	input "switchesToControl", "capability.switch", title: "Which Outlets/Switches?", multiple: true, required: true
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(triggerSwitch, "switch", triggerSwitchPressed)
+}
+
+def triggerSwitchPressed(evt){
+    if (evt.value == "on") {
+        log.debug "swtich pressed On"
+        switchesToControl?.on()
+    } else if (evt.value == "off") {
+        log.debug "swtich pressed Off"
+        switchesToControl?.off()
+    }
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }