MSA-1391: This app takes the events from a switch and uses them to toggle multiple outlets or other switches. The idea is to be able to leverage a physical switch to control multiple outlets to enable a whole room to turn on at the touch of a switch.

Rolling down staging hotfix to master

smartapps/mdvickst/use-switch-to-control-outlets.src/use-switch-to-control-outlets.groovy

@@ -0,0 +1,61 @@
+/**
+ *  Use Switch to Control Outlets
+ *
+ *  Copyright 2016 Mark Vickstrom
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Use Switch to Control Outlets",
+    namespace: "mdvickst",
+    author: "Mark Vickstrom",
+    description: "Use a Switch to control multiple outlets",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Use this Switch") {
+		input "triggerSwitch", "capability.switch", title: "Which Switch?", required: true
+	}
+    section("To Control these Devices") {
+    	input "switchesToControl", "capability.switch", title: "Which Outlets/Switches?", multiple: true, required: true
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(triggerSwitch, "switch", triggerSwitchPressed)
+}
+
+def triggerSwitchPressed(evt){
+    if (evt.value == "on") {
+        log.debug "swtich pressed On"
+        switchesToControl?.on()
+    } else if (evt.value == "off") {
+        log.debug "swtich pressed Off"
+        switchesToControl?.off()
+    }
+}

smartapps/smartthings/beep-when.src/beep-when.groovy

@@ -1,88 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Beep When
- *
- *  Author: SmartThings
- *  Date: 2016-06-05
- */
-definition(
-		name: "Beep When",
-		namespace: "smartthings",
-		author: "SmartThings",
-		description: "Beep Presence sensor when anything happens in your home.",
-		category: "Convenience",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"
-)
-
-preferences {
-	section("Choose one or more, when..."){
-		input "button", "capability.button", title: "Button Pushed", required: false, multiple: true //tw
-		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
-		input "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-		input "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-		input "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-		input "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-		input "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-		input "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-		input "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-		input "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
-		input "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
-	}
-	section("Beep the presence sensor..") {
-		input "presence", "capability.presenceSensor", title: "Which sensor beep?"
-	}
-
-	section("Minimum time between beeps (optional, defaults to every beep)") {
-		input "frequency", "decimal", title: "Minutes", required: false
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribeToEvents()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	subscribe(button, "button.pushed", eventHandler) //tw
-	subscribe(contact, "contact.open", eventHandler)
-	subscribe(contactClosed, "contact.closed", eventHandler)
-	subscribe(acceleration, "acceleration.active", eventHandler)
-	subscribe(motion, "motion.active", eventHandler)
-	subscribe(mySwitch, "switch.on", eventHandler)
-	subscribe(mySwitchOff, "switch.off", eventHandler)
-	subscribe(arrivalPresence, "presence.present", eventHandler)
-	subscribe(departurePresence, "presence.not present", eventHandler)
-	subscribe(smoke, "smoke.detected", eventHandler)
-	subscribe(smoke, "smoke.tested", eventHandler)
-	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
-	subscribe(water, "water.wet", eventHandler)
-}
-
-def eventHandler(evt) {
-	log.debug "Notify got evt ${evt}"
-	if (frequency) {
-		def lastTime = state[evt.deviceId]
-		if (lastTime == null || now() - lastTime >= frequency * 60000) {
-			 presence.beep()		}
-	}
-	else {
-		 presence.beep()
-	}
-}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }