MSA-1399: SmartThings drive that works with the LANNouncer Android app (free on the Google Play store) to work as a TTS (text to speech) device, alarm, siren, strobe, security camera and image retriever to Dropbox from security cameras.

Rolling down staging hotfix to master

devicetypes/keybounce/lannouncer-alerter.src/lannouncer-alerter.groovy

@@ -0,0 +1,350 @@
+/**
+ *  LANnouncer Alerter (Formerly LANdroid - but Google didn't like that much.)
+ *
+ *  Requires the LANnouncer android app; https://play.google.com/store/apps/details?id=com.keybounce.lannouncer
+ *  See http://www.keybounce.com/LANdroidHowTo/LANdroid.html for full downloads and instructions.
+ *  SmartThings thread: https://community.smartthings.com/t/android-as-a-speech-alarm-device-released/30282/12
+ *  
+ * Note: Only Siren and Strobe from the U.I. or Alarm capabilities default to continuous.
+ *
+ *  Version 1.24 16 July 2016
+ * 
+ *
+ *  Copyright 2015-2016 Tony McNamara
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * To Do: Add string return to Image Capture attribute
+ *
+ */
+
+metadata {
+    definition (name: "LANnouncer Alerter", namespace: "KeyBounce", author: "Tony McNamara") {
+        capability "Alarm"
+        capability "Speech Synthesis"
+        capability "Notification"
+        capability "Tone"
+        capability "Image Capture"
+        attribute  "LANdroidSMS","string"
+        /* Per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html#actuator-and-sensor */
+        capability "Sensor"
+        capability "Actuator"
+
+        // Custom Commands
+        /** Retrieve image, formatted for SmartThings, from camera by name. */
+        command "chime"
+        command "doorbell"
+        command "ipCamSequence", ["number"]
+        command "retrieveAndWait", ["string"]
+        command "retrieveFirstAndWait"
+        command "retrieveSecondAndWait"
+    }
+    preferences {
+        input("DeviceLocalLan", "string", title:"Android IP Address", description:"Please enter your tablet's I.P. address", defaultValue:"" , required: false, displayDuringSetup: true)
+        input("DevicePort", "string", title:"Android Port", description:"Port the Android device listens on", defaultValue:"1035", required: false, displayDuringSetup: true)
+        input("ReplyOnEmpty", "bool", title:"Say Nothing", description:"When no speech is found, announce LANdroid?  (Needed for the speech and notify tiles to work)", defaultValue: true, displayDuringSetup: true)
+        input("AlarmContinuous", "bool", title:"Continuous Alarm (vs 10 sec.)", description: "When on, the alarm will sound until Stop is issued.", defaultValue: false, displayDuringSetup: true)
+    }
+
+    simulator {
+        // reply messages
+        ["strobe","siren","both","off"].each 
+            {
+                reply "$it": "alarm:$it"
+            }
+    }
+
+    tiles {
+        standardTile("alarm", "device.alarm", width: 2, height: 2) {
+            state "off", label:'off', action:'alarm.both', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
+            state "strobe", label:'strobe!', action:'alarm.off', icon:"st.Lighting.light11", backgroundColor:"#e86d13"
+            state "siren", label:'siren!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+            state "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+        }
+        standardTile("strobe", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.strobe", icon:"st.secondary.strobe"
+        }
+        
+        standardTile("siren", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.siren", icon:"st.secondary.siren"
+        }
+        standardTile("off", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Off', action:"alarm.off", icon:"st.quirky.spotter.quirky-spotter-sound-off"
+        }       
+        
+        /* Apparently can't show image attributes on tiles. */
+        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) 
+        {
+            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+        }
+
+        
+        standardTile("speak", "device.speech", inactiveLabel: false, decoration: "flat") 
+        {
+            state "default", label:'Speak', action:"Speech Synthesis.speak", icon:"st.Electronics.electronics13"
+        }
+        standardTile("toast", "device.notification", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Notify', action:"notification.deviceNotification", icon:"st.Kids.kids1"
+        }
+        standardTile("beep", "device.tone", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Tone', action:"tone.beep", icon:"st.Entertainment.entertainment2"
+        }
+        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+
+        main (["alarm", "take"]);
+        details(["alarm","strobe","siren","off","speak", "take","toast","beep", "cameraDetails"]);
+    }
+}
+
+/** Generally matches TTSServer/app/build.gradle */
+String getVersion() {return "24 built July 2016";}
+
+
+// handle commands
+def off() {
+    log.debug "Executing 'off'"
+    sendEvent(name:"alarm", value:"off")
+    def command="&ALARM=STOP&FLASH=STOP&"+getDoneString();
+    sendCommands(command)
+}
+
+def strobe() {
+    log.debug "Executing 'strobe'"
+    // TODO: handle 'strobe' command
+    sendEvent(name:"alarm", value:"strobe")
+    def command="&FLASH=STROBE&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&FLASH=CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+def siren() {
+    log.debug "Executing 'siren'"
+    sendEvent(name:"alarm", value:"siren")
+    def command="&ALARM=SIREN&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&ALARM=SIREN:CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+def beep() {
+    log.debug "Executing 'beep'"
+    def command="&ALARM=CHIME&"+getDoneString()
+    sendCommands(command)
+}
+
+def both() {
+    log.debug "Executing 'both'"
+    sendEvent(name:"alarm", value:"both")
+    def command="&ALARM=ON&FLASH=ON&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&ALARM=SIREN:CONTINUOUS&FLASH=CONTINUOUS&"+getDoneString()
+    }
+    sendCommands(command)
+}
+
+
+def speak(toSay) {
+    log.debug "Executing 'speak'"
+    if (!toSay?.trim()) {
+        if (ReplyOnEmpty) {
+            toSay = "LANnouncer Version ${version}"
+        }
+    }
+
+    if (toSay?.trim()) {
+        def command="&SPEAK="+toSay+"&"+getDoneString()
+        sendCommands(command)
+    }
+}
+
+def deviceNotification(toToast) {
+    log.debug "Executing notification with "+toToast
+    if (!toToast?.trim()) {
+        if (ReplyOnEmpty) {
+            toToast = "LANnouncer Version ${version}";
+        }
+    }
+    if (toToast?.trim()) {
+        def command="&TOAST="+toToast+"&"+getDoneString()
+        sendCommands(command)
+    }
+}    
+
+def chime() {
+    log.debug "Executing 'chime'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=CHIME&"+getDoneString()
+    sendCommands(command)
+}
+
+def doorbell() {
+    log.debug "Executing 'doorbell'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=DOORBELL&"+getDoneString()
+    sendCommands(command)
+}
+
+def ipCamSequence(cameraNumber) {
+    if (cameraNumber == 1) {
+        def command="&RETRIEVESEQ=FIRST&"+getDoneString()
+        sendIPCommand(command, true)
+
+    } else {
+    def command="&RETRIEVESEQ=SECOND&"+getDoneString()
+    sendIPCommand(command, true)
+    }
+}
+
+
+def retrieveFirstAndWait() {
+    retrieveAndWait("FIRST");
+}
+def retrieveSecondAndWait() {
+    retrieveAndWait("SECOND");
+}
+def retrieveAndWait(cameraName) {
+    log.info("Requesting image from camera ${cameraName}");
+    def command="&RETRIEVE="+cameraName+"&STSHRINK=TRUE&"+getDoneString()
+    sendIPCommand(command, true)
+}
+
+
+def take() {
+    // This won't result in received file. Can't handle large or binaries in hub.
+    log.debug "Executing 'take'"
+    def command="&PHOTO=BACK&STSHRINK=TRUE&"+getDoneString()
+    sendIPCommand(command, true)
+}
+
+/* Send to IP and to SMS as appropriate */
+private sendCommands(command) {
+    log.info "Command request: "+command
+    sendSMSCommand(command)
+    sendIPCommand(command)
+}
+
+
+private sendIPCommand(commandString, sendToS3 = false) {
+    log.info "Sending command "+ commandString+" to "+DeviceLocalLan+":"+DevicePort
+    if (DeviceLocalLan?.trim()) {
+        def hosthex = convertIPtoHex(DeviceLocalLan)
+        def porthex = convertPortToHex(DevicePort)
+        device.deviceNetworkId = "$hosthex:$porthex"
+
+        def headers = [:] 
+        headers.put("HOST", "$DeviceLocalLan:$DevicePort")
+
+        def method = "GET"
+
+        def hubAction = new physicalgraph.device.HubAction(
+            method: method,
+            path: "/"+commandString,
+            headers: headers
+            );
+        if (sendToS3 == true)
+        {
+            hubAction.options = [outputMsgToS3:true];
+        }
+        log.debug hubActionw
+        hubAction;
+    }
+}
+
+private sendSMSCommand(commandString) {
+    def preface = "+@TTSSMS@+"
+    def smsValue = preface+"&"+commandString
+    state.lastsmscommand = smsValue
+    sendEvent(name: "LANdroidSMS", value: smsValue, isStateChange: true)
+    /*
+    if (SMSPhone?.trim()) {
+        sendSmsMessage(SMSPhone, preface+"&"+commandString)
+    }
+    */
+}
+
+private String getDoneString() {
+    return "@DONE@"
+}
+
+def parse(String description) {
+    log.debug "Parsing '${description}'"
+    def map = parseLanMessage(description);
+    log.debug "As LAN: " + map;
+    if ((map.headers) && (map.headers.'Content-Type' != null) && (map.headers.'Content-Type'.contains("image/jpeg")) )
+    {   //  Store the file
+      if(map.body) 
+      {
+            storeImage(getPictureName(), map.body);
+      }
+    }
+/* 'index:0F, mac:0073E023A13A, ip:C0A80114, port:040B, requestId:f9036fb2-9637-40b8-b2c5-71ba5a09fd3e, bucket:smartthings-device-conn-temp, key:fc8e3dfd-5035-40a2-8adc-a312926f9034' */
+
+    else if (map.bucket && map.key)
+    { //    S3 pointer; retrieve image from it to store.
+        try {
+            def s3ObjectContent; // Needed for scope of try-catch
+            def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
+
+            if(imageBytes)
+            {
+                log.info ("Got image bytes; saving them.")
+                s3ObjectContent = imageBytes.getObjectContent()
+                def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
+                storeImage(getPictureName(), bytes)
+            }
+        }
+        catch(Exception e) 
+        {
+            log.error e
+        }
+        finally {
+            //explicitly close the stream
+            if (s3ObjectContent) { s3ObjectContent.close() }
+        }        
+    }
+}
+
+
+// Image Capture handling
+/* Note that images are stored in https://graph.api.smartthings.com/api/s3/smartthings-smartsense-camera/[IMAGE-ID4], 
+ * where [IMAGE-ID] is listed in the IDE under My Devices > [Camera] > Current States: Image. That page is updated as pictures are taken.
+ */
+
+
+private getPictureName() {
+    def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
+    log.debug pictureUuid
+    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
+    return picName
+}
+
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02X', it.toInteger() ) }.join()
+    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
+    return hex
+
+}
+
+private String convertPortToHex(port) {
+    String hexport = port.toString().format( '%04X', port.toInteger() )
+    log.debug hexport
+    return hexport
+}
+
+

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -326,6 +327,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,7 +255,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,7 +240,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,7 +338,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,7 +234,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
@@ -22,24 +22,24 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -72,10 +72,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -89,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -100,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -126,7 +126,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -136,14 +136,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -152,10 +152,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -168,7 +168,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -201,7 +201,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -214,11 +214,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -229,7 +229,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -275,7 +276,7 @@ def refresh() {
 
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-	
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +223,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -261,7 +262,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-    
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -274,24 +275,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
+
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -299,11 +300,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -83,12 +82,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation()
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 	}
 	response(cmds)
 }

smartapps/smartthings/beep-when.src/beep-when.groovy

@@ -1,88 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Beep When
- *
- *  Author: SmartThings
- *  Date: 2016-06-05
- */
-definition(
-		name: "Beep When",
-		namespace: "smartthings",
-		author: "SmartThings",
-		description: "Beep Presence sensor when anything happens in your home.",
-		category: "Convenience",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"
-)
-
-preferences {
-	section("Choose one or more, when..."){
-		input "button", "capability.button", title: "Button Pushed", required: false, multiple: true //tw
-		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
-		input "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-		input "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-		input "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-		input "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-		input "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-		input "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-		input "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-		input "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
-		input "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
-	}
-	section("Beep the presence sensor..") {
-		input "presence", "capability.presenceSensor", title: "Which sensor beep?"
-	}
-
-	section("Minimum time between beeps (optional, defaults to every beep)") {
-		input "frequency", "decimal", title: "Minutes", required: false
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribeToEvents()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	subscribe(button, "button.pushed", eventHandler) //tw
-	subscribe(contact, "contact.open", eventHandler)
-	subscribe(contactClosed, "contact.closed", eventHandler)
-	subscribe(acceleration, "acceleration.active", eventHandler)
-	subscribe(motion, "motion.active", eventHandler)
-	subscribe(mySwitch, "switch.on", eventHandler)
-	subscribe(mySwitchOff, "switch.off", eventHandler)
-	subscribe(arrivalPresence, "presence.present", eventHandler)
-	subscribe(departurePresence, "presence.not present", eventHandler)
-	subscribe(smoke, "smoke.detected", eventHandler)
-	subscribe(smoke, "smoke.tested", eventHandler)
-	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
-	subscribe(water, "water.wet", eventHandler)
-}
-
-def eventHandler(evt) {
-	log.debug "Notify got evt ${evt}"
-	if (frequency) {
-		def lastTime = state[evt.deviceId]
-		if (lastTime == null || now() - lastTime >= frequency * 60000) {
-			 presence.beep()		}
-	}
-	else {
-		 presence.beep()
-	}
-}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
+	def totalRunTime = totalRunTimeMillis() ?: 1
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) {
+            if (body instanceof java.util.Map) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-    
+
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-    
+
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
+        if (huesettings.saturation != null)
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-    
-    // Default behavior is to turn light on 
+
+    // Default behavior is to turn light on
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else 
+        else
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }