MSA-1510: This app will allow me to hook up my hub to use siri to control it.

devicetypes/erocm123/remotec-zrc-90-scene-master.src/remotec-zrc-90-scene-master.groovy

@@ -1,174 +0,0 @@
-/**
- *  Remotec ZRC-90 Scene Master
- *  Copyright 2015 Eric Maycock
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Remotec ZRC-90 Scene Master", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Actuator"
-		capability "Button"
-		capability "Configuration"
-		capability "Sensor"
-        capability "Battery"
-        
-        attribute "sequenceNumber", "number"
-        attribute "numberOfButtons", "number"
-
-		fingerprint deviceId: "0x0106", inClusters: "0x5E,0x85,0x72,0x21,0x84,0x86,0x80,0x73,0x59,0x5A,0x5B,0xEF,0x5B,0x84"
-	}
-
-	simulator {
-		status "button 1 pushed":  "command: 5B03, payload: 23 00 01"
-		status "button 1 held":  "command: 5B03, payload: 2B 02 01"
-        status "button 1 released":  "command: 5B03, payload: 2C 01 01"
-        status "button 1 double":  "command: 5B03, payload: 2F 03 01"
-		status "button 2 pushed":  "command: 5B03, payload: 23 00 02"
-		status "button 2 held":  "command: 5B03, payload: 2B 02 02"
-        status "button 2 released":  "command: 5B03, payload: 2C 01 02"
-        status "button 2 double":  "command: 5B03, payload: 2F 03 02"
-		status "button 3 pushed":  "command: 5B03, payload: 23 00 03"
-		status "button 3 held":  "command: 5B03, payload: 2B 02 03"
-        status "button 3 released":  "command: 5B03, payload: 2C 01 03"
-        status "button 3 double":  "command: 5B03, payload: 2F 03 03"
-		status "button 4 pushed":  "command: 5B03, payload: 23 00 04"
-		status "button 4 held":  "command: 5B03, payload: 2B 02 04"
-        status "button 4 released":  "command: 5B03, payload: 2C 01 04"
-        status "button 4 double":  "command: 5B03, payload: 2F 03 04"
-        status "button 5 pushed":  "command: 5B03, payload: 23 00 05"
-		status "button 5 held":  "command: 5B03, payload: 2B 02 05"
-        status "button 5 released":  "command: 5B03, payload: 2C 01 05"
-        status "button 5 double":  "command: 5B03, payload: 2F 03 05"
-		status "button 6 pushed":  "command: 5B03, payload: 23 00 06"
-		status "button 6 held":  "command: 5B03, payload: 2B 02 06"
-        status "button 6 released":  "command: 5B03, payload: 2C 01 06"
-        status "button 6 double":  "command: 5B03, payload: 2F 03 06"
-		status "button 7 pushed":  "command: 5B03, payload: 23 00 07"
-		status "button 7 held":  "command: 5B03, payload: 2B 02 07"
-        status "button 7 released":  "command: 5B03, payload: 2C 01 07"
-        status "button 7 double":  "command: 5B03, payload: 2F 03 07"
-		status "button 8 pushed":  "command: 5B03, payload: 23 00 08"
-		status "button 8 held":  "command: 5B03, payload: 2B 02 08"
-        status "button 8 released":  "command: 5B03, payload: 2C 01 08"
-        status "button 8 double":  "command: 5B03, payload: 2F 03 08"
-        status "battery 100%": "command: 8003, payload: 64"
-		status "wakeup":  "command: 8407, payload:"
-        
-	}
-	tiles (scale: 2) {
-		standardTile("button", "device.button", width: 2, height: 2) {
-			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-		}
-        valueTile(
-			"battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-        valueTile(
-			"sequenceNumber", "device.sequenceNumber", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}', unit:""
-		}
-        standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-		main "button"
-		details(["button", "battery", "sequenceNumber", "configure"])
-	}
-    
-    preferences {
-       input name: "holdMode", type: "enum", title: "Multiple \"held\" events on botton hold? With this option, the controller will send a \"held\" event about every second while holding down a button. This allows you to set things up such as \"dimming\" in apps like Rule Machine.", defaultValue: "2", displayDuringSetup: true, required: false, options: [
-                   "1":"Yes",
-                   "2":"No"]
-       input name: "debug", type: "boolean", title: "Enable Debug?", defaultValue: false, displayDuringSetup: false, required: false
-    }
-}
-
-def parse(String description) {
-	def results = []
-    if (settings.debug == true) log.debug "${description}"
-	if (description.startsWith("Err")) {
-	    results = createEvent(descriptionText:description, displayed:true)
-	} else {
-		def cmd = zwave.parse(description, [0x2B: 1, 0x80: 1, 0x84: 1])
-		if(cmd) results += zwaveEvent(cmd)
-		if(!results) results = [ descriptionText: cmd, displayed: false ]
-	}
-    
-    if(state.isConfigured != "true") configure()
-    
-	return results
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {
-        if (settings.debug == true) log.debug "keyAttributes: $cmd.keyAttributes"
-        if (settings.debug == true) log.debug "sceneNumber: $cmd.sceneNumber"
-        if (settings.debug == true) log.debug "sequenceNumber: $cmd.sequenceNumber"
-
-        sendEvent(name: "sequenceNumber", value: cmd.sequenceNumber, displayed:false)
-        switch (cmd.keyAttributes) {
-           case 0:
-              buttonEvent(cmd.sceneNumber, "pushed")
-           break
-           case 1:
-              if (settings.holdMode == "2") buttonEvent(cmd.sceneNumber, "held")
-           break
-           case 2:
-              if (settings.holdMode == "1") buttonEvent(cmd.sceneNumber, "held")
-           break
-           case 3:
-              buttonEvent(cmd.sceneNumber + 8, "pushed")
-           break
-           default:
-              if (settings.debug == true) log.debug "Unhandled CentralSceneNotification: ${cmd}"
-           break
-        }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
-	def results = [createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)]
-	results << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
-	return results
-}
-
-def buttonEvent(button, value) {
-	createEvent(name: "button", value: value, data: [buttonNumber: button], descriptionText: "$device.displayName button $button was $value", isStateChange: true)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} battery is low"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled zwaveEvent: ${cmd}"
-}
-
-def installed() {
-    log.debug "installed()"
-    configure()
-}
-
-def updated() {
-    log.debug "updated()"
-    configure()
-}
-
-def configure() {
-	log.debug "configure()"
-    sendEvent(name: "numberOfButtons", value: 16, displayed: true)
-    state.isConfigured = "true"
-}

smartapps/jnewland/json-api.src/json-api.groovy

@@ -0,0 +1,145 @@
+/**
+ *  JSON
+ *
+ *  Copyright 2015 Jesse Newland
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "JSON API",
+    namespace: "jnewland",
+    author: "Jesse Newland",
+    description: "A JSON API for SmartThings",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: true)
+
+
+def installed() {
+    initialize()
+}
+
+def updated() {
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+}
+
+preferences {
+    page(name: "copyConfig")
+}
+
+def copyConfig() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+    dynamicPage(name: "copyConfig", title: "Config", install:true) {
+        section("Select devices to include in the /devices API call") {
+            input "switches", "capability.switch", title: "Switches", multiple: true, required: false
+            input "hues", "capability.colorControl", title: "Hues", multiple: true, required: false
+        }
+
+        section() {
+            paragraph "View this SmartApp's configuration to use it in other places."
+            href url:"https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
+        }
+
+        section() {
+            href url:"https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}", style:"embedded", required:false, title:"Debug", description:"View accessories JSON"
+        }
+    }
+}
+
+def renderConfig() {
+    def configJson = new groovy.json.JsonOutput().toJson([
+        description: "JSON API",
+        platforms: [
+            [
+                platform: "SmartThings",
+                name: "SmartThings",
+                app_id:        app.id,
+                access_token:  state.accessToken
+            ]
+        ],
+    ])
+
+    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
+    render contentType: "text/plain", data: configString
+}
+
+def deviceCommandMap(device, type) {
+  device.supportedCommands.collectEntries { command->
+      def commandUrl = "https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/${type}/${device.id}/command/${command.name}?access_token=${state.accessToken}"
+      [
+        (command.name): commandUrl
+      ]
+  }
+}
+
+def authorizedDevices() {
+    [
+        switches: switches,
+        hues: hues
+    ]
+}
+
+def renderDevices() {
+    def deviceData = authorizedDevices().collectEntries { devices->
+        [
+            (devices.key): devices.value.collect { device->
+                [
+                    name: device.displayName,
+                    commands: deviceCommandMap(device, devices.key)
+                ]
+            }
+        ]
+    }
+    def deviceJson    = new groovy.json.JsonOutput().toJson(deviceData)
+    def deviceString  = new groovy.json.JsonOutput().prettyPrint(deviceJson)
+    render contentType: "application/json", data: deviceString
+}
+
+def deviceCommand() {
+  def device  = authorizedDevices()[params.type].find { it.id == params.id }
+  def command = params.command
+  if (!device) {
+      httpError(404, "Device not found")
+  } else {
+      if (params.value) {
+        device."$command"(params.value)
+      } else {
+        device."$command"()
+      }
+  }
+}
+
+mappings {
+    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
+        path("/devices")                      { action: [GET: "authError"] }
+        path("/config")                       { action: [GET: "authError"] }
+        path("/:type/:id/command/:command")   { action: [PUT: "authError"] }
+    } else {
+        path("/devices")                      { action: [GET: "renderDevices"]  }
+        path("/config")                       { action: [GET: "renderConfig"]  }
+        path("/:type/:id/command/:command")   { action: [PUT: "deviceCommand"] }
+    }
+}
+
+def authError() {
+    [error: "Permission denied"]
+}