MSA-1506: ZRC-90

devicetypes/erocm123/remotec-zrc-90-scene-master.src/remotec-zrc-90-scene-master.groovy

@@ -0,0 +1,174 @@
+/**
+ *  Remotec ZRC-90 Scene Master
+ *  Copyright 2015 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Remotec ZRC-90 Scene Master", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Button"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Battery"
+        
+        attribute "sequenceNumber", "number"
+        attribute "numberOfButtons", "number"
+
+		fingerprint deviceId: "0x0106", inClusters: "0x5E,0x85,0x72,0x21,0x84,0x86,0x80,0x73,0x59,0x5A,0x5B,0xEF,0x5B,0x84"
+	}
+
+	simulator {
+		status "button 1 pushed":  "command: 5B03, payload: 23 00 01"
+		status "button 1 held":  "command: 5B03, payload: 2B 02 01"
+        status "button 1 released":  "command: 5B03, payload: 2C 01 01"
+        status "button 1 double":  "command: 5B03, payload: 2F 03 01"
+		status "button 2 pushed":  "command: 5B03, payload: 23 00 02"
+		status "button 2 held":  "command: 5B03, payload: 2B 02 02"
+        status "button 2 released":  "command: 5B03, payload: 2C 01 02"
+        status "button 2 double":  "command: 5B03, payload: 2F 03 02"
+		status "button 3 pushed":  "command: 5B03, payload: 23 00 03"
+		status "button 3 held":  "command: 5B03, payload: 2B 02 03"
+        status "button 3 released":  "command: 5B03, payload: 2C 01 03"
+        status "button 3 double":  "command: 5B03, payload: 2F 03 03"
+		status "button 4 pushed":  "command: 5B03, payload: 23 00 04"
+		status "button 4 held":  "command: 5B03, payload: 2B 02 04"
+        status "button 4 released":  "command: 5B03, payload: 2C 01 04"
+        status "button 4 double":  "command: 5B03, payload: 2F 03 04"
+        status "button 5 pushed":  "command: 5B03, payload: 23 00 05"
+		status "button 5 held":  "command: 5B03, payload: 2B 02 05"
+        status "button 5 released":  "command: 5B03, payload: 2C 01 05"
+        status "button 5 double":  "command: 5B03, payload: 2F 03 05"
+		status "button 6 pushed":  "command: 5B03, payload: 23 00 06"
+		status "button 6 held":  "command: 5B03, payload: 2B 02 06"
+        status "button 6 released":  "command: 5B03, payload: 2C 01 06"
+        status "button 6 double":  "command: 5B03, payload: 2F 03 06"
+		status "button 7 pushed":  "command: 5B03, payload: 23 00 07"
+		status "button 7 held":  "command: 5B03, payload: 2B 02 07"
+        status "button 7 released":  "command: 5B03, payload: 2C 01 07"
+        status "button 7 double":  "command: 5B03, payload: 2F 03 07"
+		status "button 8 pushed":  "command: 5B03, payload: 23 00 08"
+		status "button 8 held":  "command: 5B03, payload: 2B 02 08"
+        status "button 8 released":  "command: 5B03, payload: 2C 01 08"
+        status "button 8 double":  "command: 5B03, payload: 2F 03 08"
+        status "battery 100%": "command: 8003, payload: 64"
+		status "wakeup":  "command: 8407, payload:"
+        
+	}
+	tiles (scale: 2) {
+		standardTile("button", "device.button", width: 2, height: 2) {
+			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+		}
+        valueTile(
+			"battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+        valueTile(
+			"sequenceNumber", "device.sequenceNumber", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}', unit:""
+		}
+        standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		main "button"
+		details(["button", "battery", "sequenceNumber", "configure"])
+	}
+    
+    preferences {
+       input name: "holdMode", type: "enum", title: "Multiple \"held\" events on botton hold? With this option, the controller will send a \"held\" event about every second while holding down a button. This allows you to set things up such as \"dimming\" in apps like Rule Machine.", defaultValue: "2", displayDuringSetup: true, required: false, options: [
+                   "1":"Yes",
+                   "2":"No"]
+       input name: "debug", type: "boolean", title: "Enable Debug?", defaultValue: false, displayDuringSetup: false, required: false
+    }
+}
+
+def parse(String description) {
+	def results = []
+    if (settings.debug == true) log.debug "${description}"
+	if (description.startsWith("Err")) {
+	    results = createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [0x2B: 1, 0x80: 1, 0x84: 1])
+		if(cmd) results += zwaveEvent(cmd)
+		if(!results) results = [ descriptionText: cmd, displayed: false ]
+	}
+    
+    if(state.isConfigured != "true") configure()
+    
+	return results
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {
+        if (settings.debug == true) log.debug "keyAttributes: $cmd.keyAttributes"
+        if (settings.debug == true) log.debug "sceneNumber: $cmd.sceneNumber"
+        if (settings.debug == true) log.debug "sequenceNumber: $cmd.sequenceNumber"
+
+        sendEvent(name: "sequenceNumber", value: cmd.sequenceNumber, displayed:false)
+        switch (cmd.keyAttributes) {
+           case 0:
+              buttonEvent(cmd.sceneNumber, "pushed")
+           break
+           case 1:
+              if (settings.holdMode == "2") buttonEvent(cmd.sceneNumber, "held")
+           break
+           case 2:
+              if (settings.holdMode == "1") buttonEvent(cmd.sceneNumber, "held")
+           break
+           case 3:
+              buttonEvent(cmd.sceneNumber + 8, "pushed")
+           break
+           default:
+              if (settings.debug == true) log.debug "Unhandled CentralSceneNotification: ${cmd}"
+           break
+        }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+	def results = [createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)]
+	results << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+	return results
+}
+
+def buttonEvent(button, value) {
+	createEvent(name: "button", value: value, data: [buttonNumber: button], descriptionText: "$device.displayName button $button was $value", isStateChange: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} battery is low"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled zwaveEvent: ${cmd}"
+}
+
+def installed() {
+    log.debug "installed()"
+    configure()
+}
+
+def updated() {
+    log.debug "updated()"
+    configure()
+}
+
+def configure() {
+	log.debug "configure()"
+    sendEvent(name: "numberOfButtons", value: 16, displayed: true)
+    state.isConfigured = "true"
+}

smartapps/jnewland/json-api.src/json-api.groovy

@@ -1,145 +0,0 @@
-/**
- *  JSON
- *
- *  Copyright 2015 Jesse Newland
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "JSON API",
-    namespace: "jnewland",
-    author: "Jesse Newland",
-    description: "A JSON API for SmartThings",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-def installed() {
-    initialize()
-}
-
-def updated() {
-    unsubscribe()
-    initialize()
-}
-
-def initialize() {
-    if (!state.accessToken) {
-        createAccessToken()
-    }
-}
-
-preferences {
-    page(name: "copyConfig")
-}
-
-def copyConfig() {
-    if (!state.accessToken) {
-        createAccessToken()
-    }
-    dynamicPage(name: "copyConfig", title: "Config", install:true) {
-        section("Select devices to include in the /devices API call") {
-            input "switches", "capability.switch", title: "Switches", multiple: true, required: false
-            input "hues", "capability.colorControl", title: "Hues", multiple: true, required: false
-        }
-
-        section() {
-            paragraph "View this SmartApp's configuration to use it in other places."
-            href url:"https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
-        }
-
-        section() {
-            href url:"https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}", style:"embedded", required:false, title:"Debug", description:"View accessories JSON"
-        }
-    }
-}
-
-def renderConfig() {
-    def configJson = new groovy.json.JsonOutput().toJson([
-        description: "JSON API",
-        platforms: [
-            [
-                platform: "SmartThings",
-                name: "SmartThings",
-                app_id:        app.id,
-                access_token:  state.accessToken
-            ]
-        ],
-    ])
-
-    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
-    render contentType: "text/plain", data: configString
-}
-
-def deviceCommandMap(device, type) {
-  device.supportedCommands.collectEntries { command->
-      def commandUrl = "https://graph-eu01-euwest1.api.smartthings.com/api/smartapps/installations/${app.id}/${type}/${device.id}/command/${command.name}?access_token=${state.accessToken}"
-      [
-        (command.name): commandUrl
-      ]
-  }
-}
-
-def authorizedDevices() {
-    [
-        switches: switches,
-        hues: hues
-    ]
-}
-
-def renderDevices() {
-    def deviceData = authorizedDevices().collectEntries { devices->
-        [
-            (devices.key): devices.value.collect { device->
-                [
-                    name: device.displayName,
-                    commands: deviceCommandMap(device, devices.key)
-                ]
-            }
-        ]
-    }
-    def deviceJson    = new groovy.json.JsonOutput().toJson(deviceData)
-    def deviceString  = new groovy.json.JsonOutput().prettyPrint(deviceJson)
-    render contentType: "application/json", data: deviceString
-}
-
-def deviceCommand() {
-  def device  = authorizedDevices()[params.type].find { it.id == params.id }
-  def command = params.command
-  if (!device) {
-      httpError(404, "Device not found")
-  } else {
-      if (params.value) {
-        device."$command"(params.value)
-      } else {
-        device."$command"()
-      }
-  }
-}
-
-mappings {
-    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
-        path("/devices")                      { action: [GET: "authError"] }
-        path("/config")                       { action: [GET: "authError"] }
-        path("/:type/:id/command/:command")   { action: [PUT: "authError"] }
-    } else {
-        path("/devices")                      { action: [GET: "renderDevices"]  }
-        path("/config")                       { action: [GET: "renderConfig"]  }
-        path("/:type/:id/command/:command")   { action: [PUT: "deviceCommand"] }
-    }
-}
-
-def authError() {
-    [error: "Permission denied"]
-}