MSA-1506: ZRC-90

README.md

@@ -1,10 +1,10 @@
-# SmartThings Public GitHub Repo
+# SmartThings Public Github Repo
 
 An official list of SmartApps and Device Types from SmartThings.
 
 Here are some links to help you get started coding right away:
 
-* [GitHub-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
+* [Github-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
 * [Full Documentation](http://docs.smartthings.com)
 * [IDE & Simulator](http://ide.smartthings.com)
 * [Community Forums](http://community.smartthings.com)

devicetypes/erocm123/remotec-zrc-90-scene-master.src/remotec-zrc-90-scene-master.groovy

@@ -0,0 +1,174 @@
+/**
+ *  Remotec ZRC-90 Scene Master
+ *  Copyright 2015 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Remotec ZRC-90 Scene Master", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Button"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Battery"
+        
+        attribute "sequenceNumber", "number"
+        attribute "numberOfButtons", "number"
+
+		fingerprint deviceId: "0x0106", inClusters: "0x5E,0x85,0x72,0x21,0x84,0x86,0x80,0x73,0x59,0x5A,0x5B,0xEF,0x5B,0x84"
+	}
+
+	simulator {
+		status "button 1 pushed":  "command: 5B03, payload: 23 00 01"
+		status "button 1 held":  "command: 5B03, payload: 2B 02 01"
+        status "button 1 released":  "command: 5B03, payload: 2C 01 01"
+        status "button 1 double":  "command: 5B03, payload: 2F 03 01"
+		status "button 2 pushed":  "command: 5B03, payload: 23 00 02"
+		status "button 2 held":  "command: 5B03, payload: 2B 02 02"
+        status "button 2 released":  "command: 5B03, payload: 2C 01 02"
+        status "button 2 double":  "command: 5B03, payload: 2F 03 02"
+		status "button 3 pushed":  "command: 5B03, payload: 23 00 03"
+		status "button 3 held":  "command: 5B03, payload: 2B 02 03"
+        status "button 3 released":  "command: 5B03, payload: 2C 01 03"
+        status "button 3 double":  "command: 5B03, payload: 2F 03 03"
+		status "button 4 pushed":  "command: 5B03, payload: 23 00 04"
+		status "button 4 held":  "command: 5B03, payload: 2B 02 04"
+        status "button 4 released":  "command: 5B03, payload: 2C 01 04"
+        status "button 4 double":  "command: 5B03, payload: 2F 03 04"
+        status "button 5 pushed":  "command: 5B03, payload: 23 00 05"
+		status "button 5 held":  "command: 5B03, payload: 2B 02 05"
+        status "button 5 released":  "command: 5B03, payload: 2C 01 05"
+        status "button 5 double":  "command: 5B03, payload: 2F 03 05"
+		status "button 6 pushed":  "command: 5B03, payload: 23 00 06"
+		status "button 6 held":  "command: 5B03, payload: 2B 02 06"
+        status "button 6 released":  "command: 5B03, payload: 2C 01 06"
+        status "button 6 double":  "command: 5B03, payload: 2F 03 06"
+		status "button 7 pushed":  "command: 5B03, payload: 23 00 07"
+		status "button 7 held":  "command: 5B03, payload: 2B 02 07"
+        status "button 7 released":  "command: 5B03, payload: 2C 01 07"
+        status "button 7 double":  "command: 5B03, payload: 2F 03 07"
+		status "button 8 pushed":  "command: 5B03, payload: 23 00 08"
+		status "button 8 held":  "command: 5B03, payload: 2B 02 08"
+        status "button 8 released":  "command: 5B03, payload: 2C 01 08"
+        status "button 8 double":  "command: 5B03, payload: 2F 03 08"
+        status "battery 100%": "command: 8003, payload: 64"
+		status "wakeup":  "command: 8407, payload:"
+        
+	}
+	tiles (scale: 2) {
+		standardTile("button", "device.button", width: 2, height: 2) {
+			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+		}
+        valueTile(
+			"battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+        valueTile(
+			"sequenceNumber", "device.sequenceNumber", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}', unit:""
+		}
+        standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		main "button"
+		details(["button", "battery", "sequenceNumber", "configure"])
+	}
+    
+    preferences {
+       input name: "holdMode", type: "enum", title: "Multiple \"held\" events on botton hold? With this option, the controller will send a \"held\" event about every second while holding down a button. This allows you to set things up such as \"dimming\" in apps like Rule Machine.", defaultValue: "2", displayDuringSetup: true, required: false, options: [
+                   "1":"Yes",
+                   "2":"No"]
+       input name: "debug", type: "boolean", title: "Enable Debug?", defaultValue: false, displayDuringSetup: false, required: false
+    }
+}
+
+def parse(String description) {
+	def results = []
+    if (settings.debug == true) log.debug "${description}"
+	if (description.startsWith("Err")) {
+	    results = createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [0x2B: 1, 0x80: 1, 0x84: 1])
+		if(cmd) results += zwaveEvent(cmd)
+		if(!results) results = [ descriptionText: cmd, displayed: false ]
+	}
+    
+    if(state.isConfigured != "true") configure()
+    
+	return results
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {
+        if (settings.debug == true) log.debug "keyAttributes: $cmd.keyAttributes"
+        if (settings.debug == true) log.debug "sceneNumber: $cmd.sceneNumber"
+        if (settings.debug == true) log.debug "sequenceNumber: $cmd.sequenceNumber"
+
+        sendEvent(name: "sequenceNumber", value: cmd.sequenceNumber, displayed:false)
+        switch (cmd.keyAttributes) {
+           case 0:
+              buttonEvent(cmd.sceneNumber, "pushed")
+           break
+           case 1:
+              if (settings.holdMode == "2") buttonEvent(cmd.sceneNumber, "held")
+           break
+           case 2:
+              if (settings.holdMode == "1") buttonEvent(cmd.sceneNumber, "held")
+           break
+           case 3:
+              buttonEvent(cmd.sceneNumber + 8, "pushed")
+           break
+           default:
+              if (settings.debug == true) log.debug "Unhandled CentralSceneNotification: ${cmd}"
+           break
+        }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+	def results = [createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)]
+	results << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+	return results
+}
+
+def buttonEvent(button, value) {
+	createEvent(name: "button", value: value, data: [buttonNumber: button], descriptionText: "$device.displayName button $button was $value", isStateChange: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} battery is low"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled zwaveEvent: ${cmd}"
+}
+
+def installed() {
+    log.debug "installed()"
+    configure()
+}
+
+def updated() {
+    log.debug "updated()"
+    configure()
+}
+
+def configure() {
+	log.debug "configure()"
+    sendEvent(name: "numberOfButtons", value: 16, displayed: true)
+    state.isConfigured = "true"
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,10 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-            map.unit = getTemperatureScale()
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -15,7 +15,6 @@ metadata {
 	definition (name: "Aeon Key Fob", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
@@ -119,16 +118,3 @@ def configure() {
 	log.debug("Sending configuration: $cmd")
 	return cmd
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -15,7 +15,6 @@ metadata {
 	definition (name: "Aeon Minimote", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 
@@ -108,16 +107,3 @@ def configure() {
 	log.debug("Sending configuration: $cmds")
 	return cmds
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,6 +11,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -59,7 +60,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
+    onAction("refresh")
 }
 
 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -0,0 +1,156 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	CentraLite Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2013-12-04
+ */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+metadata {
+	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+		
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "Parse description $description"
+	def name = null
+	def value = null
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace msg
+		log.trace "data: $msg.data"
+	} else if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Read attr: $description"
+		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+			name = "switch"
+			value = descMap.value.endsWith("01") ? "on" : "off"
+		} else {
+			def reportValue = description.split(",").find {it.split(":")[0].trim() == "value"}?.split(":")[1].trim()
+			name = "power"
+			// assume 16 bit signed for encoding and power divisor is 10
+			value = Integer.parseInt(reportValue, 16) / 10
+		}
+	} else if (description?.startsWith("on/off:")) {
+		log.debug "Switch command"
+		name = "switch"
+		value = description?.endsWith(" 1") ? "on" : "off"
+	}
+
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+// Commands to device
+def on() {
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
+}
+
+def off() {
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	def cmd = "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 2000}"
+	log.debug cmd
+	cmd
+}
+
+def meter() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def refresh() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def configure() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}"
+	]
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -81,47 +81,51 @@ metadata {
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parse description $description"
-	List result = []
-	def descMap = zigbee.parseDescriptionAsMap(description)
-	log.debug "Desc Map: $descMap"
-	List attrData = [[cluster: descMap.cluster ,attrId: descMap.attrId, value: descMap.value]]
-	descMap.additionalAttrs.each {
-	    attrData << [cluster: descMap.cluster, attrId: it.attrId, value: it.value]
-	}
-	attrData.each {
-		def map = [:]
-		if (it.cluster == "0201" && it.attrId == "0000") {
+	def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		if (descMap.cluster == "0201" && descMap.attrId == "0000") {
 			log.debug "TEMP"
 			map.name = "temperature"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0011") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0012") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "001c") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
-			map.value = getModeMap()[it.value]
-		} else if (it.cluster == "0202" && it.attrId == "0000") {
+			map.value = getModeMap()[descMap.value]
+		} else if (descMap.cluster == "0202" && descMap.attrId == "0000") {
 			log.debug "FAN MODE"
 			map.name = "thermostatFanMode"
-			map.value = getFanModeMap()[it.value]
+			map.value = getFanModeMap()[descMap.value]
 		}
-		if (map) {
-			result << createEvent(map)
-		}
-		log.debug "Parse returned $map"
 	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
 	return result
 }
 
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
 def getModeMap() { [
 	"00":"off",
 	"03":"cool",

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -16,7 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Button"
-		capability "Actuator"
+        capability "Actuator"
 
 		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
 	}
@@ -74,20 +74,20 @@ def off() {
 }
 
 def levelup() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel <= 90)
-    	setLevel(curlevel + 10);
+    	setLevel(curlevel + 10);     
 }
 
 def leveldown() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel >= 10)
-    	setLevel(curlevel - 10)
+    	setLevel(curlevel - 10)    
 }
 
 def setLevel(value) {
 	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value)
+	sendEvent(name: "level", value: value) 
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
@@ -106,11 +106,11 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	if (cmd.upDown == true) {
 		Integer buttonid = 2
         leveldown()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)		
     } else if (cmd.upDown == false) {
 		Integer buttonid = 3
         levelup()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)       
 	}
 }
 
@@ -140,12 +140,12 @@ def buttonEvent(button) {
     def result = []
 	if (button == 1) {
     	def mystate = device.currentValue('switch');
-        if (mystate == "on")
+        if (mystate == "on") 
             off()
         else
-            on()
+            on()   
     }
-    updateState("currentButton", "$button")
+    updateState("currentButton", "$button")   
         // update the device state, recording the button press
         result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
     result
@@ -182,16 +182,3 @@ def updateState(String name, String value) {
 	state[name] = value
 	device.updateDataValue(name, value)
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 3)
-}

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,6 +1,6 @@
 # Connected Cree LED Bulb
 
-Cloud Execution
+
 
 Works with: 
 
@@ -23,10 +23,8 @@ Works with:
 
 ## Device Health
 
-Connected Cree LED Bulb with cloud polling it every __5min__
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,7 +23,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -83,7 +82,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()       //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 /**
@@ -94,19 +93,20 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def healthPoll() {
-    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    runEvery5Minutes("healthPoll")
-    // Device-Watch allows 2 check-in misses from device + ping
+    schedule("0 0/5 * * * ? *", "healthPoll")
+    log.debug "Configuring Reporting and Bindings."
+    // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -1,47 +0,0 @@
-# Z-wave Dimmer Switch
-
-Local Execution on V2 Hubs
-
-Works with:
-
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
-* **Actuator** - represents that a Device has commands
-* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Check-in interval = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -20,13 +20,10 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -85,8 +82,6 @@ metadata {
 }
 
 def updated(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -220,13 +215,6 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []
@@ -238,17 +226,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
-		capability "Health Check"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -32,14 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
-		attribute "thermostatStatus", "string"
+		attribute "thermostatSetpoint","number"
+		attribute "thermostatStatus","string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "string"
-		attribute "deviceAlive", "enum", ["true", "false"]
+		attribute "deviceTemperatureUnit", "number"
 	}
 
 	tiles {
@@ -122,21 +120,6 @@ metadata {
 
 }
 
-void installed() {
-    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
-    // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
-}
-
-// Device Watch will ping the device to proactively determine if the device has gone offline
-// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
-def ping() {
-    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
-    if (isAlive) {
-        refresh()
-    }
-}
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -165,12 +148,14 @@ def generateEvent(Map results) {
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
@@ -181,11 +166,7 @@ def generateEvent(Map results) {
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
-				event['displayed'] = false
-			} else {
+			}  else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
@@ -272,6 +253,7 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -301,6 +283,7 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
+
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -371,6 +354,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
+
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -536,56 +520,63 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
+
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
+	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C") {
-		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
-		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
-		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
-		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
-		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
-		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
-	} else {
-		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
-		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
-		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
-		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
-		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
-		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
+	if(location.temperatureScale == "C")
+	{
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
+		coolingSetpoint = roundC(coolingSetpoint)
 	}
 
-	log.debug "Current Mode = ${mode}"
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 
 	if (mode == "heat") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
 	else if (mode == "cool") {
+
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+
 	} else if (mode == "auto") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
 	} else if (mode == "off") {
+
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
 	} else if (mode == "auxHeatOnly") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+
 	}
+
 }
 
 void raiseSetpoint() {
@@ -594,31 +585,21 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
-
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
@@ -641,29 +622,20 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
 		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
@@ -681,83 +653,66 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
+
 	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow alterSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def deviceId = device.deviceNetworkId.split(/\./).last()
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
 
-		def targetHeatingSetpoint
-		def targetCoolingSetpoint
-
-		def temperatureScaleHasChanged = false
-
-		if (location.temperatureScale == "C") {
-			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat" || mode == "auxHeatOnly"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
 		}
-
-		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
-			if (temp.value > coolingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = coolingSetpoint
-			}
-		} else if (mode == "cool") {
-			//enforce limits before sending request to cloud
-			if (temp.value < heatingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = heatingSetpoint
-				targetCoolingSetpoint = temp.value
-			}
-		}
-
-		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
-				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-			} else if (mode == "cool") {
-				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-			}
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
 		}
-
-		if ( temperatureScaleHasChanged )
-			generateSetpointEvent()
-		generateStatusEvent()
 	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat" || mode == "auxHeatOnly"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {
+
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
+
 	def statusText
 
 	log.debug "Generate Status Event for Mode = ${mode}"
@@ -767,25 +722,36 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
+
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+
 	} else if (mode == "cool") {
+
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-	} else if (mode == "auto") {
-		statusText = "Right Now: Auto"
-	} else if (mode == "off") {
-		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
-		statusText = "Emergency Heat"
-	} else {
-		statusText = "?"
-	}
 
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "auxHeatOnly") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
@@ -799,7 +765,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -29,10 +29,10 @@
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Configuration"
+		capability "Configuration" 
 		capability "Color Control"
         capability "Power Meter"
-
+       
         command "getDeviceData"
         command "softwhite"
         command "daylight"
@@ -54,12 +54,12 @@
         command "setAdjustedColor"
         command "setWhiteLevel"
         command "test"
-
+        
         attribute "whiteLevel", "string"
-
+      
 		fingerprint deviceId: "0x1101", inClusters: "0x27,0x72,0x86,0x26,0x60,0x70,0x32,0x31,0x85,0x33"
 	}
-
+    
     simulator {
     	status "on":  "command: 2003, payload: FF"
     	status "off": "command: 2003, payload: 00"
@@ -84,7 +84,7 @@
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
-		}
+		}     
 		controlTile("whiteSliderControl", "device.whiteLevel", "slider", height: 1, width: 3, inactiveLabel: false) {
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
@@ -183,24 +183,24 @@
 		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
 			state "hue", label: 'Hue ${currentValue}   '
 		}
-
+        
         main(["switch"])
-        details(["switch",
-                 "levelSliderControl",
-                 "rgbSelector",
-                 "whiteSliderControl",
+        details(["switch", 
+                 "levelSliderControl", 
+                 "rgbSelector", 
+                 "whiteSliderControl", 
                  /*"softwhite",
                  "daylight",
                  "warmwhite",
-                 "red",
-                 "green",
+                 "red", 
+                 "green", 
                  "blue",
                  "white",
                  "cyan",
                  "magenta",
                  "orange",
                  "purple",
-                 "yellow",
+                 "yellow",                 
                  "fireplace",
                  "storm",
                  "deepfade",
@@ -214,7 +214,7 @@
 
 def setAdjustedColor(value) {
 	log.debug "setAdjustedColor: ${value}"
-
+    
     toggleTiles("off") //turn off the hard color tiles
 
     def level = device.latestValue("level")
@@ -223,19 +223,19 @@ def setAdjustedColor(value) {
     log.debug "level is: ${level}"
     value.level = level
 
-	def c = hexToRgb(value.hex)
+	def c = hexToRgb(value.hex) 
 	value.rh = hex(c.r * (level/100))
 	value.gh = hex(c.g * (level/100))
 	value.bh = hex(c.b * (level/100))
-
-    setColor(value)
+	
+    setColor(value)  
 }
 
 def setColor(value) {
 	log.debug "setColor: ${value}"
     log.debug "hue is: ${value.hue}"
     log.debug "saturation is: ${value.saturation}"
-
+    
     if (value.size() < 8)
     	toggleTiles("off")
 
@@ -246,22 +246,22 @@ def setColor(value) {
         value.gh = hex(rgb.g)
         value.bh = hex(rgb.b)
     }
-
+    
     if ((value.size() == 3) && (value.hue != null) && (value.saturation != null) && (value.level)) { //user passed in a level value too from outside (App)
     	def rgb = hslToRGB(value.hue, value.saturation, 0.5)
         value.hex = rgbToHex(rgb)
         value.rh = hex(rgb.r * value.level/100)
         value.gh = hex(rgb.g * value.level/100)
-        value.bh = hex(rgb.b * value.level/100)
+        value.bh = hex(rgb.b * value.level/100)       
     }
-
+    
     if (( value.size() == 1) && (value.hex)) { //being called from outside of device (App) with only hex
 		def rgbInt = hexToRgb(value.hex)
         value.rh = hex(rgbInt.r)
         value.gh = hex(rgbInt.g)
         value.bh = hex(rgbInt.b)
     }
-
+    
     if (( value.size() == 2) && (value.hex) && (value.level)) { //being called from outside of device (App) with only hex and level
 
         def rgbInt = hexToRgb(value.hex)
@@ -269,7 +269,7 @@ def setColor(value) {
         value.gh = hex(rgbInt.g * value.level/100)
         value.bh = hex(rgbInt.b * value.level/100)
     }
-
+    
     if (( value.size() == 1) && (value.colorName)) { //being called from outside of device (App) with only color name
         def colorData = getColorData(value.colorName)
         value.rh = colorData.rh
@@ -277,7 +277,7 @@ def setColor(value) {
         value.bh = colorData.bh
         value.hex = "#${value.rh}${value.gh}${value.bh}"
     }
-
+    
     if (( value.size() == 2) && (value.colorName) && (value.level)) { //being called from outside of device (App) with only color name and level
 		def colorData = getColorData(value.colorName)
         value.rh = hex(colorData.r * value.level/100)
@@ -285,7 +285,7 @@ def setColor(value) {
         value.bh = hex(colorData.b * value.level/100)
         value.hex = "#${hex(colorData.r)}${hex(colorData.g)}${hex(colorData.b)}"
     }
-
+    
     if (( value.size() == 3) && (value.red != null) && (value.green != null) && (value.blue != null)) { //being called from outside of device (App) with only color values (0-255)
         value.rh = hex(value.red)
         value.gh = hex(value.green)
@@ -299,7 +299,7 @@ def setColor(value) {
         value.bh = hex(value.blue * value.level/100)
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
-
+    
 	sendEvent(name: "hue", value: value.hue, displayed: false)
 	sendEvent(name: "saturation", value: value.saturation, displayed: false)
 	sendEvent(name: "color", value: value.hex, displayed: false)
@@ -309,26 +309,26 @@ def setColor(value) {
 	if (value.switch) {
 		sendEvent(name: "switch", value: value.switch)
 	}
-
+	   
     sendRGB(value.rh, value.gh, value.bh)
 }
 
 def setLevel(level) {
 	log.debug "setLevel($level)"
-
+    
 	if (level == 0) { off() }
 	else if (device.latestValue("switch") == "off") { on() }
-
+    
     def colorHex = device.latestValue("color")
     if (colorHex == null)
 		colorHex = "#FFFFFF"
-
+        
     def c = hexToRgb(colorHex)
-
+    
     def r = hex(c.r * (level/100))
     def g = hex(c.g * (level/100))
     def b = hex(c.b * (level/100))
-
+    
 	sendEvent(name: "level", value: level)
     sendEvent(name: "setLevel", value: level, displayed: false)
 	sendRGB(r, g, b)
@@ -337,14 +337,14 @@ def setLevel(level) {
 
 def setWhiteLevel(value) {
 	log.debug "setWhiteLevel: ${value}"
-    def level = Math.min(value as Integer, 99)
+    def level = Math.min(value as Integer, 99)    
     level = 255 * level/99 as Integer
     def channel = 0
 
 	if (device.latestValue("switch") == "off") { on() }
-
+    
     sendEvent(name: "whiteLevel", value: value)
-    sendWhite(channel, value)
+    sendWhite(channel, value)       
 }
 
 def sendWhite(channel, value) {
@@ -367,20 +367,20 @@ def sendRGBW(redHex, greenHex, blueHex, whiteHex) {
 
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
+    
 
-
-
+    
     def cmds = []
-
+    
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId]).format()
-
-
+    
+    
     //cmds << sendEvent(name: "level", value: 50)
     //cmds << on()
     //cmds << doColorButton("Green")
     delayBetween(cmds, 500)
-
+    
 }
 
 def parse(String description) {
@@ -411,11 +411,11 @@ def parse(String description) {
 
 def getDeviceData() {
     def cmd = []
-
-    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+    
+    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet()) 
     cmd << response(zwave.versionV1.versionGet())
 	cmd << response(zwave.firmwareUpdateMdV1.firmwareMdGet())
-
+    
     delayBetween(cmd, 500)
 }
 
@@ -426,7 +426,7 @@ def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.Manufacturer
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -435,13 +435,13 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) {
+def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) { 
 
 	log.debug "In CapabilityReport"
 }
@@ -546,7 +546,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
      def value = "when off"
      if (cmd.configurationValue[0] == 1) {value = "when on"}
      if (cmd.configurationValue[0] == 2) {value = "never"}
-     [name: "indicatorStatus", value: value, displayed: false]
+     [name: "indicatorStatus", value: value, display: false]
 }
 */
 def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
@@ -557,7 +557,7 @@ def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
 def on() {
 	log.debug "on()"
 	sendEvent(name: "switch", value: "on")
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(),
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), 
     			  zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
@@ -593,7 +593,7 @@ def refresh() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
+	if ( params ) {   
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -601,9 +601,9 @@ def updateZwaveParam(params) {
 
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-
+        
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1500)
+        delayBetween(cmds, 1500)        
     }
 }
 
@@ -612,22 +612,22 @@ def test() {
     //value = [hue: 0, saturation: 100, level: 5]
     //value = [red: 255, green: 0, blue: 255, level: 60]
 	//setColor(value)
-
+    
     def cmd = []
-
+    
     if ( !state.cnt ) {
     	state.cnt = 6
     } else {
     	state.cnt = state.cnt + 1
     }
-
+    
     if ( state.cnt > 10 )
     	state.cnt = 6
-
+    
     // run programmed light show
 	cmd << zwave.configurationV1.configurationSet(configurationValue: [state.cnt], parameterNumber: 72, size: 1).format()
-    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()
-
+    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()  
+    
     delayBetween(cmd, 500)
 
 }
@@ -638,23 +638,23 @@ def colorNameToRgb(color) {
         [name:"Soft White",	r: 255, g: 241, b: 224	],
         [name:"Daylight", 	r: 255, g: 255, b: 251	],
         [name:"Warm White", r: 255, g: 244, b: 229	],
-
+        
         [name:"Red", 		r: 255, g: 0,	b: 0	],
 		[name:"Green", 		r: 0, 	g: 255,	b: 0	],
         [name:"Blue", 		r: 0, 	g: 0,	b: 255	],
-
+        
 		[name:"Cyan", 		r: 0, 	g: 255,	b: 255	],
-        [name:"Magenta", 	r: 255, g: 0,	b: 33	],
+        [name:"Magenta", 	r: 255, g: 0,	b: 33	],       
         [name:"Orange", 	r: 255, g: 102, b: 0	],
-
+        
         [name:"Purple", 	r: 170, g: 0,	b: 255	],
 		[name:"Yellow", 	r: 255, g: 255, b: 0	],
         [name:"White", 		r: 255, g: 255, b: 255	]
 	]
-
-    def colorData = [:]
+    
+    def colorData = [:]    
     colorData = colors.find { it.name == color }
-
+    
     colorData
 }
 
@@ -670,7 +670,7 @@ def hexToRgb(colorHex) {
 	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
     def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
     def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-
+    
     def colorData = [:]
     colorData = [r: rrInt, g: ggInt, b: bbInt]
     colorData
@@ -681,7 +681,7 @@ def rgbToHex(rgb) {
     def g = hex(rgb.g)
     def b = hex(rgb.b)
     def hexColor = "#${r}${g}${b}"
-
+    
     hexColor
 }
 
@@ -689,11 +689,11 @@ def hslToRGB(float var_h, float var_s, float var_l) {
 	float h = var_h / 100
     float s = var_s / 100
     float l = var_l
-
+    
     def r = 0
     def g = 0
     def b = 0
-
+    
 	if (s == 0) {
     	r = l * 255
         g = l * 255
@@ -705,26 +705,26 @@ def hslToRGB(float var_h, float var_s, float var_l) {
         } else {
         	var_2 = (l + s) - (s * l)
         }
-
+                
         float var_1 = 2 * l - var_2
-
+        
         r = 255 * hueToRgb(var_1, var_2, h + (1 / 3))
         g = 255 * hueToRgb(var_1, var_2, h)
-        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))
+        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))    
     }
-
+    
     def rgb = [:]
     rgb = [r: r, g: g, b: b]
 
-    rgb
+    rgb 
 }
 
 def hueToRgb(v1, v2, vh) {
-	if (vh < 0) { vh += 1 }
+	if (vh < 0) { vh += 1 }            
 	if (vh > 1) { vh -= 1 }
 	if ((6 * vh) < 1) { return (v1 + (v2 - v1) * 6 * vh) }
     if ((2 * vh) < 1) { return (v2) }
-    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }
+    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }    
     return (v1)
 }
 
@@ -735,49 +735,49 @@ def rgbToHSL(rgb) {
     def h = 0
     def s = 0
     def l = 0
-
+    
     def var_min = [r,g,b].min()
     def var_max = [r,g,b].max()
     def del_max = var_max - var_min
-
+    
     l = (var_max + var_min) / 2
-
+    
     if (del_max == 0) {
             h = 0
             s = 0
     } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) }
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
         else { s = del_max / (2 - var_max - var_min) }
 
         def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
         def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
         def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
 
-        if (r == var_max) { h = del_b - del_g }
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b }
+        if (r == var_max) { h = del_b - del_g } 
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
         else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-
+        
 		if (h < 0) { h += 1 }
         if (h > 1) { h -= 1 }
 	}
-    def hsl = [:]
+    def hsl = [:]    
     hsl = [h: h * 100, s: s * 100, l: l]
-
+    
     hsl
 }
 
 def getColorData(colorName) {
 	log.debug "getColorData: ${colorName}"
-
+    
     def colorRGB = colorNameToRgb(colorName)
     def colorHex = rgbToHex(colorRGB)
 	def colorHSL = rgbToHSL(colorRGB)
-
+        
     def colorData = [:]
-    colorData = [h: colorHSL.h,
-    			 s: colorHSL.s,
-                 l: device.latestValue("level"),
-                 r: colorRGB.r,
+    colorData = [h: colorHSL.h, 
+    			 s: colorHSL.s, 
+                 l: device.latestValue("level"), 
+                 r: colorRGB.r, 
                  g: colorRGB.g,
                  b: colorRGB.b,
                  rh: hex(colorRGB.r),
@@ -785,8 +785,8 @@ def getColorData(colorName) {
                  bh: hex(colorRGB.b),
                  hex: colorHex,
                  alpha: 1]
-
-     colorData
+     
+     colorData                 
 }
 
 def doColorButton(colorName) {
@@ -798,7 +798,7 @@ def doColorButton(colorName) {
     def maxLevel = hex(99)
 
     toggleTiles(colorName.toLowerCase().replaceAll("\\s",""))
-
+    
     if 		( colorName == "Fire Place" ) 	{ updateZwaveParam([paramNumber:72, value:6,  size:1]) }
 	else if ( colorName == "Storm" ) 		{ updateZwaveParam([paramNumber:72, value:7,  size:1]) }
     else if ( colorName == "Deep Fade" ) 	{ updateZwaveParam([paramNumber:72, value:8,  size:1]) }
@@ -808,8 +808,8 @@ def doColorButton(colorName) {
     else if ( colorName == "Daylight" ) 	{ String.format("33050400${maxLevel}02${maxLevel}03${maxLevel}04${maxLevel}%02X", 100) }
     else {
 		def c = getColorData(colorName)
-		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]
-    	setColor(newValue)
+		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]  
+    	setColor(newValue)            
     	def r = hex(c.r * (level/100))
     	def g = hex(c.g * (level/100))
     	def b = hex(c.b * (level/100))
@@ -823,19 +823,19 @@ def toggleTiles(color) {
 	if ( !state.colorTiles ) {
     	state.colorTiles = ["softwhite","daylight","warmwhite","red","green","blue","cyan","magenta","orange","purple","yellow","white","fireplace","storm","deepfade","litefade","police"]
     }
-
+    
     def cmds = []
-
+    
     state.colorTiles.each({
     	if ( it == color ) {
         	log.debug "Turning ${it} on"
-            cmds << sendEvent(name: it, value: "on${it}", displayed: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
+            cmds << sendEvent(name: it, value: "on${it}", display: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
         } else {
         	//log.debug "Turning ${it} off"
         	cmds << sendEvent(name: it, value: "off${it}", displayed: false)
         }
     })
-
+    
     delayBetween(cmds, 2500)
 }
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -87,7 +87,7 @@ metadata {
 def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        if (resultMap.name != "level" || resultMap.value != 0) {  // Ignore level reports of 0 sent when bulb turns off
+        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
             sendEvent(resultMap)
         }
     }
@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -188,22 +188,25 @@ def updated() {
 }
 
 def on() {
+    state.trigger = "on/off"
     zigbee.on()
 }
 
 def off() {
+    state.trigger = "on/off"
     zigbee.off()
 }
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
 }
 
 def setLevel(value) {
+    state.trigger = "setLevel"
     def cmd
     def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -0,0 +1,351 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	    GE/Jasco ZigBee Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2015-07-01
+ */
+
+metadata {
+	definition (name: "GE ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Switch Level"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+			state "power", label:'${currentValue} W'
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		main "switch"
+		details(["switch", "level", "power","levelSliderControl","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+}
+
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"]
+}
+
+def off() {
+	zigbeeCommand("6", "0")
+}
+
+def on() {
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000") + ["delay 1000"] + on()	//value is between 0 to 100; GE does NOT switch on if OFF
+	}
+}
+
+def refresh() {
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
+	]
+
+}
+
+def configure() {
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return "false"
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0702") {
+		if (descMap.attrId == "0400") {
+			powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0702") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0702) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 1 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+			//Meter (Power) Reporting
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -0,0 +1,284 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	    GE/Jasco ZigBee Switch
+ *
+ *	Author: SmartThings
+ *	Date: 2015-07-01
+ */
+
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "GE ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "power", label:'${currentValue} Watts'
+		}
+		main "switch"
+		details(["switch", "power", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+}
+
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
+}
+
+def off() {
+	zigbeeCommand("6", "0")
+}
+
+def on() {
+	zigbeeCommand("6", "1")
+}
+
+def refresh() {
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
+	]
+
+}
+
+def configure() {
+	onOffConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return "false"
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0702") {
+		if (descMap.attrId == "0400") {
+			powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0702") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0702) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+			//Meter (Power) Reporting
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -17,7 +17,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"
@@ -58,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -173,3 +172,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,12 +7,9 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
-		capability "Health Check"
-
 		attribute "networkAddress", "string"
-		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-		// Possible values "Online" or "Offline"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -45,10 +42,6 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -77,8 +70,13 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				} else if (contentType?.contains("xml")) {
+				}
+				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -87,4 +85,3 @@ def parse(description) {
 	}
 	results
 }
-

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -18,7 +18,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"
@@ -67,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -175,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent?.manualRefresh()
+    parent.manualRefresh()
 }
 
 def verifyPercent(percent) {
@@ -189,3 +188,6 @@ def verifyPercent(percent) {
     }
 }
 
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,8 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
+        capability "Health Check"
 
         command "refresh"
 	}
@@ -51,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -94,3 +93,6 @@ void refresh() {
 	parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -16,7 +16,6 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Health Check"
-        capability "Light"
 
         command "refresh"
     }
@@ -56,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -108,3 +107,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -11,10 +11,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
+		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {
@@ -24,6 +23,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
@@ -64,8 +64,12 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
 }
 
 // handle commands
@@ -137,6 +141,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -188,17 +193,14 @@ def off() {
 	return []
 }
 
-def refresh() {
-	log.debug "Executing 'refresh'"
-	
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		state.online = false
-		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
- 		log.warn "$device is Offline"
+		sendEvent(name: "switch", value: "unreachable")
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -207,20 +209,19 @@ def refresh() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.power)
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
 	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: data.product.name)
+	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
-	if (data.connected) {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
-		log.debug "$device is Online"
-	} else {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
-		log.warn "$device is Offline"
+	return []
 }
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
 }
 
 def selector() {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -10,10 +10,9 @@ metadata {
 		capability "Color Temperature"
 		capability "Switch"
 		capability "Switch Level" // brightness
+		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {
@@ -23,12 +22,13 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
 				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
 
+			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel"
 			}
@@ -53,10 +53,15 @@ metadata {
 		main "switch"
 		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
+
 }
 
-void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
 }
 
 // handle commands
@@ -66,6 +71,7 @@ def setLevel(percentage) {
 		percentage = 1 // clamp to 1%
 	}
 	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
@@ -117,17 +123,14 @@ def off() {
 	return []
 }
 
-def refresh() {
-	log.debug "Executing 'refresh'"
-	
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
-		state.online = false
-		sendEvent(name: "DeviceWatch-DeviceStatusUpdate", value: "offline", displayed: false)
-		log.warn "$device is Offline"
+		sendEvent(name: "switch", value: "unreachable")
 		return []
 	} else if (resp.status != 200) {
-		log.error("Unexpected result in refresh(): [${resp.status}] ${resp.data}")
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
 	def data = resp.data[0]
@@ -135,17 +138,16 @@ def refresh() {
 	sendEvent(name: "label", value: data.label)
 	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch", value: data.power)
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
 	sendEvent(name: "model", value: data.product.name)
 
-	if (data.connected) {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "online", displayed: false)
-		log.debug "$device is Online"
-	} else {
-		sendEvent(name: "DeviceWatch-DeviceStatus", value: "offline", displayed: false)
-		log.warn "$device is Offline"
-	}
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
 }
 
 def selector() {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/momentary-button-tile.src/momentary-button-tile.groovy

@@ -43,8 +43,8 @@ def parse(String description) {
 }
 
 def push() {
-	sendEvent(name: "switch", value: "on", isStateChange: true, displayed: false)
-	sendEvent(name: "switch", value: "off", isStateChange: true, displayed: false)
+	sendEvent(name: "switch", value: "on", isStateChange: true, display: false)
+	sendEvent(name: "switch", value: "off", isStateChange: true, display: false)
 	sendEvent(name: "momentary", value: "pushed", isStateChange: true)
 }
 

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,41 +0,0 @@
-# Nyce Door/Window Sensor (Open/Close Sensor)
-
-Cloud Execution
-
-Works with:
-
-* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (with possible values - open/closed)
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Nyce Door/Window sensor with reporting interval of 5 min.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
- 
-* __12min__ checkInterval
-
-
-## Battery Specification
-
-One 3V CR2032 battery required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,26 +19,25 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-		capability "Battery"
+    	capability "Battery"
 		capability "Configuration"
-		capability "Contact Sensor"
+        capability "Contact Sensor"
 		capability "Refresh"
-		capability "Health Check"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+        
+        command "enrollResponse"
+ 
+ 
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
-
+ 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -274,28 +273,23 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def enrollCmds = [
+	def configCmds = [
+			//battery reporting and heartbeat
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+
+
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds
 }
 
 def enrollResponse() {
@@ -340,8 +334,7 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	def refreshCmds = [
+	[
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
-	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -40,11 +40,14 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	def resMap
-	if (description.startsWith("zone")) {
-		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
+	def name = null
+	def value = description
+	if (zigbee.isZoneType19(description)) {
+		name = "contact"
+		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
 	}
 	
-	log.debug "Parse returned $resMap"
-	return resMap
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -0,0 +1,384 @@
+/*
+    Osram Lightify Gardenspot Mini RGB
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+
+metadata {
+    definition (name: "OSRAM LIGHTIFY Gardenspot mini RGB", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Color Control"
+
+        attribute "colorName", "string"
+
+        command "setAdjustedColor"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+            state "color", action:"setAdjustedColor"
+        }
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+            state "colorName", label: '${currentValue}'
+        }
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+            state "level", label: 'Level ${currentValue}%'
+        }
+
+        main(["switch"])
+        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "rgbSelector"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    //log.info "description is $description"
+    if (description?.startsWith("catchall:")) {
+        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+            def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            if(!(description?.startsWith("catchall: 0104 0300"))){
+                def result = createEvent(name: "switch", value: "off")
+                log.debug "Parse returned ${result?.descriptionText}"
+                return result
+            }
+        }
+    }
+    else if (description?.startsWith("read attr -")) {
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            if(descMap.attrId == "0000"){  //Hue Attribute
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Hue value returned is $hueValue"
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(descMap.attrId == "0001"){ //Saturation Attribute
+                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Saturation from refresh is $saturationValue"
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else if(descMap.cluster == "0008"){
+            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+            log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+    else {
+        def name = description?.startsWith("on/off: ") ? "switch" : null
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+        def result = createEvent(name: name, value: value)
+        log.debug "Parse returned ${result?.descriptionText}"
+        return result
+    }
+
+
+}
+
+def on() {
+    log.debug "on()"
+    sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def zigbeeOff() {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def off() {
+    log.debug "off()"
+    sendEvent(name: "switch", value: "off")
+    zigbeeOff()
+}
+
+def refresh() {
+    [
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    log.debug "Configuring Reporting and Bindings."
+    def configCmds = [
+
+            //Switch Reporting
+            "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
+
+            //Level Control Reporting
+            "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+            "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
+
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+    ]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def poll(){
+    log.debug "Poll is calling refresh"
+    refresh()
+}
+
+def zigbeeSetLevel(level) {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+}
+
+def setLevel(value) {
+	state.levelValue = (value==null) ? 100 : value
+    log.trace "setLevel($value)"
+    def cmds = []
+
+    if (value == 0) {
+        sendEvent(name: "switch", value: "off")
+        cmds << zigbeeOff()
+    }
+    else if (device.latestValue("switch") == "off") {
+        sendEvent(name: "switch", value: "on")
+    }
+
+    sendEvent(name: "level", value: state.levelValue)
+    def level = hex(state.levelValue * 255 / 100)
+    cmds << zigbeeSetLevel(level)
+
+    //log.debug cmds
+    cmds
+}
+
+//input Hue Integer values; returns color name for saturation 100%
+private getColorName(hueValue){
+    if(hueValue>100 || hueValue<0)
+        return
+
+    hueValue = Math.round(hueValue / 100 * 360)
+
+    log.debug "hue value is $hueValue"
+
+    def colorName = "Color Mode"
+    if(hueValue>=0 && hueValue <= 4){
+        colorName = "Red"
+    }
+    else if (hueValue>=5 && hueValue <=21 ){
+        colorName = "Brick Red"
+    }
+    else if (hueValue>=22 && hueValue <=30 ){
+        colorName = "Safety Orange"
+    }
+    else if (hueValue>=31 && hueValue <=40 ){
+        colorName = "Dark Orange"
+    }
+    else if (hueValue>=41 && hueValue <=49 ){
+        colorName = "Amber"
+    }
+    else if (hueValue>=50 && hueValue <=56 ){
+        colorName = "Gold"
+    }
+    else if (hueValue>=57 && hueValue <=65 ){
+        colorName = "Yellow"
+    }
+    else if (hueValue>=66 && hueValue <=83 ){
+        colorName = "Electric Lime"
+    }
+    else if (hueValue>=84 && hueValue <=93 ){
+        colorName = "Lawn Green"
+    }
+    else if (hueValue>=94 && hueValue <=112 ){
+        colorName = "Bright Green"
+    }
+    else if (hueValue>=113 && hueValue <=135 ){
+        colorName = "Lime"
+    }
+    else if (hueValue>=136 && hueValue <=166 ){
+        colorName = "Spring Green"
+    }
+    else if (hueValue>=167 && hueValue <=171 ){
+        colorName = "Turquoise"
+    }
+    else if (hueValue>=172 && hueValue <=187 ){
+        colorName = "Aqua"
+    }
+    else if (hueValue>=188 && hueValue <=203 ){
+        colorName = "Sky Blue"
+    }
+    else if (hueValue>=204 && hueValue <=217 ){
+        colorName = "Dodger Blue"
+    }
+    else if (hueValue>=218 && hueValue <=223 ){
+        colorName = "Navy Blue"
+    }
+    else if (hueValue>=224 && hueValue <=251 ){
+        colorName = "Blue"
+    }
+    else if (hueValue>=252 && hueValue <=256 ){
+        colorName = "Han Purple"
+    }
+    else if (hueValue>=257 && hueValue <=274 ){
+        colorName = "Electric Indigo"
+    }
+    else if (hueValue>=275 && hueValue <=289 ){
+        colorName = "Electric Purple"
+    }
+    else if (hueValue>=290 && hueValue <=300 ){
+        colorName = "Orchid Purple"
+    }
+    else if (hueValue>=301 && hueValue <=315 ){
+        colorName = "Magenta"
+    }
+    else if (hueValue>=316 && hueValue <=326 ){
+        colorName = "Hot Pink"
+    }
+    else if (hueValue>=327 && hueValue <=335 ){
+        colorName = "Deep Pink"
+    }
+    else if (hueValue>=336 && hueValue <=339 ){
+        colorName = "Raspberry"
+    }
+    else if (hueValue>=340 && hueValue <=352 ){
+        colorName = "Crimson"
+    }
+    else if (hueValue>=353 && hueValue <=360 ){
+        colorName = "Red"
+    }
+
+    colorName
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}
+
+private evenHex(value){
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() % 2 != 0) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    def max = 0xfe
+
+    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
+
+    def colorName = getColorName(value.hue)
+    sendEvent(name: "colorName", value: colorName)
+
+    log.debug "color name is : $colorName"
+    sendEvent(name: "hue", value: value.hue, displayed:false)
+    sendEvent(name: "saturation", value: value.saturation, displayed:false)
+    def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
+    def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
+
+    def cmd = []
+    if (value.switch != "off" && device.latestValue("switch") == "off") {
+        cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+        cmd << "delay 150"
+    }
+
+    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
+    cmd << "delay 150"
+    cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
+    
+    if (value.level) {
+        state.levelValue = value.level
+        sendEvent(name: "level", value: value.level)
+        def level = hex(value.level * 255 / 100)
+        cmd << zigbeeSetLevel(level)
+    }
+    
+    if (value.switch == "off") {
+        cmd << "delay 150"
+        cmd << off()
+    }
+
+    cmd
+}

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -0,0 +1,459 @@
+/*
+    Osram Flex RGBW Light Strip
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
+metadata {
+	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+		capability "Switch Level"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Color Control"
+
+        attribute "colorName", "string"
+
+        command "setAdjustedColor"
+
+
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
+        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
+
+    }
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemperature", action:"color temperature.setColorTemperature"
+		}
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+			state "colorTemperature", label: '${currentValue} K'
+		}
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+			state "colorName", label: '${currentValue}'
+		}
+
+        controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setAdjustedColor"
+		}
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+
+
+		main(["switch"])
+		details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp", "rgbSelector"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	//log.info "description is $description"
+	if (description?.startsWith("catchall:")) {
+		if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+        	def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            if(!(description?.startsWith("catchall: 0104 0300"))){
+                def result = createEvent(name: "switch", value: "off")
+                log.debug "Parse returned ${result?.descriptionText}"
+                return result
+            }
+        }
+
+	}
+    else if (description?.startsWith("read attr -")) {	//for values returned after hitting refresh
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            if(descMap.attrId == "0007"){
+                log.debug "in read attr"
+                log.debug descMap.value
+                def tempInMired = convertHexToInt(descMap.value)
+                def tempInKelvin = Math.round(1000000/tempInMired)
+                log.trace "temp in kelvin: $tempInKelvin"
+                sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
+            }
+            else if(descMap.attrId == "0008"){  //Color mode attribute
+                if(descMap.value == "00"){
+                    state.colorType = "rgb"
+                }else if(descMap.value == "02"){
+                    state.colorType = "white"
+                }
+            }
+            else if(descMap.attrId == "0000"){  //Hue Attribute
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Hue value returned is $hueValue"
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(descMap.attrId == "0001"){ //Saturation Attribute
+                def saturationValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
+                log.debug "Saturation from refresh is $saturationValue"
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else if(descMap.cluster == "0008"){
+        	def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+        	log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+        log.debug "description is $description"
+		return result
+	}
+
+
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def zigbeeOff() {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	zigbeeOff()
+}
+
+def refresh() {
+    [
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 1", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 8"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    state.colorType = "white"
+	log.debug "Configuring Reporting and Bindings."
+	def configCmds = [
+
+        //Switch Reporting
+        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
+
+        //Level Control Reporting
+        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
+
+        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def setColorTemperature(value) {
+    state?.colorType = "white"
+	if(value<101){
+    	value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
+    }
+
+    def tempInMired = Math.round(1000000/value)
+    def finalHex = swapEndianHex(hex(tempInMired, 4))
+    def genericName = getGenericName(value)
+    log.debug "generic name is : $genericName"
+
+    def cmds = []
+    sendEvent(name: "colorTemperature", value: value, displayed:false)
+    sendEvent(name: "colorName", value: genericName)
+
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
+
+    cmds
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def poll(){
+	log.debug "Poll is calling refresh"
+	refresh()
+}
+
+def zigbeeSetLevel(level) {
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+}
+
+def setLevel(value) {
+	state.levelValue = (value==null) ? 100 : value
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << zigbeeOff()
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+	sendEvent(name: "level", value: state.levelValue)
+	def level = hex(state.levelValue * 255 / 100)
+	cmds << zigbeeSetLevel(level)
+
+	//log.debug cmds
+	cmds
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+private getGenericName(value){
+    def genericName = "White"
+    if(state?.colorType == "rgb"){
+        genericName = "Color Mode"
+    }
+	else{
+        if(value < 3300){
+            genericName = "Soft White"
+        } else if(value < 4150){
+            genericName = "Moonlight"
+        } else if(value < 5000){
+            genericName = "Cool White"
+        } else if(value <= 6500){
+            genericName = "Daylight"
+        }
+    }
+
+    genericName
+}
+
+//input Hue Integer values; returns color name for saturation 100%
+private getColorName(hueValue){
+    if(hueValue>100 || hueValue<0)
+        return
+
+    hueValue = Math.round(hueValue / 100 * 360)
+
+    log.debug "hue value is $hueValue"
+
+    def colorName = "Color Mode"
+    if(hueValue>=0 && hueValue <= 4){
+        colorName = "Red"
+    }
+    else if (hueValue>=5 && hueValue <=21 ){
+        colorName = "Brick Red"
+    }
+    else if (hueValue>=22 && hueValue <=30 ){
+        colorName = "Safety Orange"
+    }
+    else if (hueValue>=31 && hueValue <=40 ){
+        colorName = "Dark Orange"
+    }
+    else if (hueValue>=41 && hueValue <=49 ){
+        colorName = "Amber"
+    }
+    else if (hueValue>=50 && hueValue <=56 ){
+        colorName = "Gold"
+    }
+    else if (hueValue>=57 && hueValue <=65 ){
+        colorName = "Yellow"
+    }
+    else if (hueValue>=66 && hueValue <=83 ){
+        colorName = "Electric Lime"
+    }
+    else if (hueValue>=84 && hueValue <=93 ){
+        colorName = "Lawn Green"
+    }
+    else if (hueValue>=94 && hueValue <=112 ){
+        colorName = "Bright Green"
+    }
+    else if (hueValue>=113 && hueValue <=135 ){
+        colorName = "Lime"
+    }
+    else if (hueValue>=136 && hueValue <=166 ){
+        colorName = "Spring Green"
+    }
+    else if (hueValue>=167 && hueValue <=171 ){
+        colorName = "Turquoise"
+    }
+    else if (hueValue>=172 && hueValue <=187 ){
+        colorName = "Aqua"
+    }
+    else if (hueValue>=188 && hueValue <=203 ){
+        colorName = "Sky Blue"
+    }
+    else if (hueValue>=204 && hueValue <=217 ){
+        colorName = "Dodger Blue"
+    }
+    else if (hueValue>=218 && hueValue <=223 ){
+        colorName = "Navy Blue"
+    }
+    else if (hueValue>=224 && hueValue <=251 ){
+        colorName = "Blue"
+    }
+    else if (hueValue>=252 && hueValue <=256 ){
+        colorName = "Han Purple"
+    }
+    else if (hueValue>=257 && hueValue <=274 ){
+        colorName = "Electric Indigo"
+    }
+    else if (hueValue>=275 && hueValue <=289 ){
+        colorName = "Electric Purple"
+    }
+    else if (hueValue>=290 && hueValue <=300 ){
+        colorName = "Orchid Purple"
+    }
+    else if (hueValue>=301 && hueValue <=315 ){
+        colorName = "Magenta"
+    }
+    else if (hueValue>=316 && hueValue <=326 ){
+        colorName = "Hot Pink"
+    }
+    else if (hueValue>=327 && hueValue <=335 ){
+        colorName = "Deep Pink"
+    }
+    else if (hueValue>=336 && hueValue <=339 ){
+        colorName = "Raspberry"
+    }
+    else if (hueValue>=340 && hueValue <=352 ){
+        colorName = "Crimson"
+    }
+    else if (hueValue>=353 && hueValue <=360 ){
+        colorName = "Red"
+    }
+
+    colorName
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private evenHex(value){
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() % 2 != 0) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+    state?.colorType = "rgb"
+	log.trace "setColor($value)"
+	def max = 0xfe
+
+    if (value.hex) { sendEvent(name: "color", value: value.hex, displayed:false)}
+
+    def colorName = getColorName(value.hue)
+    log.debug "color name is : $colorName"
+    sendEvent(name: "colorName", value: colorName)
+    sendEvent(name: "colorTemperature", value: "--", displayed:false)
+
+
+    sendEvent(name: "hue", value: value.hue, displayed:false)
+	sendEvent(name: "saturation", value: value.saturation, displayed:false)
+	def scaledHueValue = evenHex(Math.round(value.hue * max / 100.0))
+	def scaledSatValue = evenHex(Math.round(value.saturation * max / 100.0))
+
+	def cmd = []
+	if (value.switch != "off" && device.latestValue("switch") == "off") {
+		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+		cmd << "delay 150"
+	}
+
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${scaledHueValue} 00 0000}"
+	cmd << "delay 150"
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${scaledSatValue} 0000}"
+
+    if (value.level) {
+        state.levelValue = value.level
+        sendEvent(name: "level", value: value.level)
+        def level = hex(value.level * 255 / 100)
+        cmd << zigbeeSetLevel(level)
+    }
+
+	if (value.switch == "off") {
+		cmd << "delay 150"
+		cmd << off()
+	}
+
+	cmd
+}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -0,0 +1,252 @@
+/*
+    Osram Tunable White 60 A19 bulb
+
+    Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
+    that issue by using state variables
+*/
+
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
+metadata {
+    definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Color Temperature"
+        capability "Actuator"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Sensor"
+
+        attribute "colorName", "string"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+            state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat") {
+            state "colorName", label: '${currentValue}'
+        }
+
+
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+            state "level", label: 'Level ${currentValue}%'
+        }
+
+
+        main(["switch"])
+        details(["switch", "refresh", "colorName", "levelSliderControl", "level", "colorTempSliderControl", "colorTemp"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    //log.trace description
+
+    if (description?.startsWith("catchall:")) {
+        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
+        {
+            def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+        else if(description?.endsWith("0000") || description?.endsWith("1000") || description?.matches("on/off\\s*:\\s*0"))
+        {
+            def result = createEvent(name: "switch", value: "off")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
+        }
+
+    }
+    else if (description?.startsWith("read attr -")) {
+        def descMap = parseDescriptionAsMap(description)
+        log.trace "descMap : $descMap"
+
+        if (descMap.cluster == "0300") {
+            log.debug descMap.value
+            def tempInMired = convertHexToInt(descMap.value)
+            def tempInKelvin = Math.round(1000000/tempInMired)
+            log.trace "temp in kelvin: $tempInKelvin"
+            sendEvent(name: "colorTemperature", value: tempInKelvin, displayed:false)
+        }
+        else if(descMap.cluster == "0008"){
+            def dimmerValue = Math.round(convertHexToInt(descMap.value) * 100 / 255)
+            log.debug "dimmer value is $dimmerValue"
+            sendEvent(name: "level", value: dimmerValue)
+        }
+    }
+    else {
+        def name = description?.startsWith("on/off: ") ? "switch" : null
+        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+        def result = createEvent(name: name, value: value)
+        log.debug "Parse returned ${result?.descriptionText}"
+        return result
+    }
+}
+
+def on() {
+    log.debug "on()"
+    sendEvent(name: "switch", value: "on")
+    setLevel(state?.levelValue)
+}
+
+def off() {
+    log.debug "off()"
+    sendEvent(name: "switch", value: "off")
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def refresh() {
+    [
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+            "st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0300 7"
+    ]
+
+}
+
+def configure() {
+    state.levelValue = 100
+    log.debug "Configuring Reporting and Bindings."
+    def configCmds = [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x0300 {${device.zigbeeId}} {}", "delay 500"
+    ]
+    return onOffConfig() + levelConfig() + configCmds + refresh() // send refresh cmds as part of config
+}
+
+def onOffConfig() {
+    [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 200",
+            "zcl global send-me-a-report 6 0 0x10 0 300 {01}",
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+    ]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+    [
+            "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 200",
+            "zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+    ]
+}
+
+def setColorTemperature(value) {
+    if(value<101){
+        value = (value*38) + 2700		//Calculation of mapping 0-100 to 2700-6500
+    }
+
+    def tempInMired = Math.round(1000000/value)
+    def finalHex = swapEndianHex(hex(tempInMired, 4))
+    def genericName = getGenericName(value)
+    log.debug "generic name is : $genericName"
+
+    def cmds = []
+    sendEvent(name: "colorTemperature", value: value, displayed:false)
+    sendEvent(name: "colorName", value: genericName)
+
+    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x0300 0x0a {${finalHex} 2000}"
+
+    cmds
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+def setLevel(value) {
+    state.levelValue = (value==null) ? 100 : value
+    log.trace "setLevel($value)"
+    def cmds = []
+
+    if (value == 0) {
+        sendEvent(name: "switch", value: "off")
+        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+    }
+    else if (device.latestValue("switch") == "off") {
+        sendEvent(name: "switch", value: "on")
+    }
+
+    sendEvent(name: "level", value: state.levelValue)
+    def level = hex(state.levelValue * 254 / 100)
+    cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+    //log.debug cmds
+    cmds
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+private getGenericName(value){
+    def genericName = "White"
+    if(value < 3300){
+        genericName = "Soft White"
+    } else if(value < 4150){
+        genericName = "Moonlight"
+    } else if(value < 5000){
+        genericName = "Cool White"
+    } else if(value <= 6500){
+        genericName = "Daylight"
+    }
+
+    genericName
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+    byte tmp;
+    tmp = array[1];
+    array[1] = array[0];
+    array[0] = tmp;
+    return array
+}

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -70,36 +69,283 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = zigbee.getEvent(description)
-	if (!event) {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	} else if (event.name == "power") {
-		/*
-			Dividing by 10 as the Divisor is 10000 and unit is kW for the device. Simplifying to 10 power level is an integer.
-		*/
-		event.value = event.value / 10
-	}
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
 
-	return event ? createEvent(event) : event
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
 }
 
-def setLevel(value) {
-	zigbee.setLevel(value)
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
 }
 
 def off() {
-	zigbee.off()
+	zigbeeCommand("6", "0")
 }
 
 def on() {
-	zigbee.on()
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		if (device.latestValue("switch") == "off") {
+			sendEvent(name: "switch", value: "on")
+		}
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000")		//value is between 0 to 100
+	}
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.electricMeasurementPowerRefresh()
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
+	]
+
 }
 
 def configure() {
-	refresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.electricMeasurementPowerConfig()
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
+			isDescriptionPower(descMap)
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
 }

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}
@@ -52,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 
 	]
 
@@ -63,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 2000'
+			'delay 500'
 	]
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -1,6 +1,6 @@
 # SmartPower Outlet
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -23,11 +23,10 @@ Works with:
 
 ## Device Health
 
-SmartPower outlet with reporting interval of 5 mins
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __21min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -13,9 +13,10 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -23,12 +24,10 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
-		capability "Outlet"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 
@@ -46,32 +45,32 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
 		}
 	}
 
 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
-			tileAttribute("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label: '${currentValue} W'
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
 			}
 		}
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main "switch"
-		details(["switch", "refresh"])
+		details(["switch","refresh"])
 	}
 }
 
@@ -79,33 +78,35 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = zigbee.getEvent(description)
+	def finalResult = zigbee.getKnownDescription(description)
 
-	if (event) {
-		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
-		} else if (event.name == "switch") {
-			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info "final result = $finalResult"
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
 		}
-	} else {
-		def cluster = zigbee.parse(description)
-
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-			if (cluster.data[0] == 0x00) {
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-				event = null
-			}
-		} else {
-			log.warn "DID NOT PARSE MESSAGE for description : $description"
-			log.debug "${cluster}"
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
-	return event ? createEvent(event) : event
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
 }
 
 def off() {
@@ -127,11 +128,45 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + zigbee.electricMeasurementPowerConfig()
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -86,9 +86,9 @@ metadata {
 
 def parse(String description) {
 	log.debug "parse($description)"
-	def results = [:]
+	def results = null
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Moisture Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -23,11 +23,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Moisture sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition(name: "SmartSense Moisture Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -29,10 +29,9 @@ metadata {
 		command "enrollResponse"
 
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -43,10 +42,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
-			])
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -55,32 +54,32 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
+		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main(["water", "temperature"])
+		main (["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
@@ -88,95 +87,190 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	// getEvent will handle temperature and humidity
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [:]
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
 
 	def volts = rawValue / 10
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
-
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
+		}
 	}
 
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMoistureResult(value) {
 	log.debug "water"
-	def descriptionText
-	if (value == "wet")
-		descriptionText = '{{ device.displayName }} is wet'
-	else
-		descriptionText = '{{ device.displayName }} is dry'
+    def descriptionText
+    if ( value == "wet" )
+    	descriptionText = '{{ device.displayName }} is wet'
+    else
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
-			name           : 'water',
-			value          : value,
-			descriptionText: descriptionText,
-			translatable   : true
+		name: 'water',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
@@ -189,18 +283,65 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
 }

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Motion Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -22,12 +22,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Motion sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
-
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition(name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -45,10 +45,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -57,30 +57,30 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°', unit: "F",
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main(["motion", "temperature"])
@@ -90,40 +90,100 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else if (descMap.clusterInt == 0x0406 && descMap.attrInt == 0x0000) {
-				def value = descMap.value.endsWith("01") ? "active" : "inactive"
-				log.warn "Doing a read attr motion event"
-				resultMap = getMotionResult(value)
-			}
-		}
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
+
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+
+			case 0x0406:
+				log.debug 'motion'
+				resultMap.name = 'motion'
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
@@ -131,53 +191,97 @@ private Map parseIasMessage(String description) {
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
 
-	def result = [:]
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
 
 	def volts = rawValue / 10
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
 
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
 		}
 	}
 
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
-			name           : 'motion',
-			value          : value,
-			descriptionText: descriptionText,
-			translatable   : true
+		name: 'motion',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
@@ -185,24 +289,70 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
 	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
-
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	]
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
 }

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -0,0 +1,313 @@
+/**
+ *  SmartSense Motion/Temp Sensor
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+metadata {
+	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Configuration"
+		capability "Battery"
+        capability "Temperature Measurement"
+		capability "Refresh"
+		capability "Sensor"
+
+        command "enrollResponse"
+
+	}
+
+	simulator {
+		status "active": "zone report :: type: 19 value: 0031"
+		status "inactive": "zone report :: type: 19 value: 0030"
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			}
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery", "refresh"])
+	}
+}
+
+def parse(String description) {
+	log.debug "description: $description"
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+
+			case 0x0406:
+            	log.debug 'motion'
+                resultMap.name = 'motion'
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	resultMap = getMotionResult(value)
+    }
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
+	def volts = rawValue / 10
+	def descriptionText
+
+    if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
+			result.value = Math.min(100, roundedPct)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getMotionResult(value) {
+	log.debug 'motion'
+	String linkText = getLinkText(device)
+	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	return [
+		name: 'motion',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+def refresh() {
+	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+    ]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -44,8 +44,8 @@ metadata {
 }
 
 def parse(String description) {
-	def results = [:]
-	if (description.startsWith("zone") || !isSupportedDescription(description)) {
+	def results
+	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -57,24 +57,21 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
-	if (name != null) {
-		def value = parseValue(description)
-		def linkText = getLinkText(device)
-		def descriptionText = parseDescriptionText(linkText, value, description)
-		def handlerName = value
-		def isStateChange = isStateChange(device, name, value)
+	def value = parseValue(description)
+	def linkText = getLinkText(device)
+	def descriptionText = parseDescriptionText(linkText, value, description)
+	def handlerName = value
+	def isStateChange = isStateChange(device, name, value)
 
-		results = [
-				name           : name,
-				value          : value,
-				linkText       : linkText,
-				descriptionText: descriptionText,
-				handlerName    : handlerName,
-				isStateChange  : isStateChange,
-				displayed      : displayed(description, isStateChange)
-		]
-	}
+	def results = [
+		name: name,
+		value: value,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
 	log.debug "Parse returned $results.descriptionText"
 	return results
 }
@@ -87,12 +84,16 @@ private String parseName(String description) {
 }
 
 private String parseValue(String description) {
-	def zs = zigbee.parseZoneStatus(description)
-	if (zs) {
-		zs.isAlarm1Set() ? "active" : "inactive"
-	} else {
-		description
+	if (isZoneType19(description)) {
+		if (translateStatusZoneType19(description)) {
+			return "active"
+		}
+		else {
+			return "inactive"
+		}
 	}
+
+	description
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Multi Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -26,11 +26,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Multi sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -14,23 +14,22 @@
  *  under the License.
  */
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition(name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 
 		capability "Three Axis"
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Contact Sensor"
-		capability "Acceleration Sensor"
-		capability "Refresh"
-		capability "Temperature Measurement"
+ 		capability "Contact Sensor"
+ 		capability "Acceleration Sensor"
+ 		capability "Refresh"
+ 		capability "Temperature Measurement"
 		capability "Health Check"
 
-		command "enrollResponse"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
+ 		command "enrollResponse"
+ 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
@@ -58,11 +57,11 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -74,124 +73,375 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "status", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
-				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
-				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e")
-			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state("temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 
 		main(["status", "acceleration", "temperature"])
 		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
-}
+ }
 
 def parse(String description) {
-	def maps = []
-	maps << zigbee.getEvent(description)
-	if (!maps[0]) {
-		maps = []
-		if (description?.startsWith('zone status')) {
-			maps += parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				maps << getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else {
-
-				maps += handleAcceleration(descMap)
-			}
-		}
-	} else if (maps[0].name == "temperature") {
-		def map = maps[0]
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}
 
-	def result = maps.inject([]) {acc, it ->
-		if (it) {
-			acc << createEvent(it)
-		}
-	}
+	def result = map ? createEvent(map) : null
+
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	return result
-}
-
-private List<Map> handleAcceleration(descMap) {
-	def result = []
-	if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0010) {
-		def value = descMap.value == "01" ? "active" : "inactive"
-		log.debug "Acceleration $value"
-		result << [
-				name           : "acceleration",
-				value          : value,
-				descriptionText: "{{ device.displayName }} was $value",
-				isStateChange  : isStateChange(device, "acceleration", value),
-				translatable   : true
-		]
-
-		if (descMap.additionalAttrs) {
-			result += parseAxis(descMap.additionalAttrs)
-		}
-	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
-		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
-		result += parseAxis(addAttrs)
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
 	}
 	return result
 }
 
-private List<Map> parseAxis(List<Map> attrData) {
-	def results = []
-	def x = hexToSignedInt(attrData.find { it.attrInt == 0x0012 }?.value)
-	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
-	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+			resultMap = getBatteryResult(cluster.data.last())
+			break
+
+			case 0xFC02:
+			log.debug 'ACCELERATION'
+			break
+
+			case 0x0402:
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private List parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+
+	List result = []
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		result << getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+		result << getAccelerationResult(descMap.value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return result
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
+
+			if (garageSensor != "Yes"){
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+			}
+
+	return resultMap
+}
+
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
+	}
+
+private Map getBatteryResult(rawValue) {
+	log.debug "Battery rawValue = ${rawValue}"
+
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
+
+	def volts = rawValue / 10
+
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
+		}
+		else {
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+				volts = rawValue // For the batteryMap to work the key needs to be an int
+				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
+								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
+				def minVolts = 15
+				def maxVolts = 28
+
+				if (volts < minVolts)
+					volts = minVolts
+				else if (volts > maxVolts)
+					volts = maxVolts
+				def pct = batteryMap[volts]
+				if (pct != null) {
+					result.value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				}
+			}
+			else {
+				def minVolts = 2.1
+				def maxVolts = 3.0
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+			}
+		}
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug "Temperature"
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug "Contact: ${device.displayName} value = ${value}"
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration"
+	def name = "acceleration"
+    def value
+    def descriptionText
+
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
+	]
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
+def refresh() {
+	log.debug "Refreshing Values "
+
+	def refreshCmds = []
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		log.debug "Refreshing Values for manufacturer: SmartThings "
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+	} else {
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+	}
+
+	//Common refresh commands
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	log.debug "Configuring Reporting"
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300) +
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+
+	return configCmds + refresh()
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private Map parseAxis(String description) {
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
 
-	def xyzResults = [:]
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
 		xyzResults.x = z
@@ -208,166 +458,9 @@ private List<Map> parseAxis(List<Map> attrData) {
 	log.debug "parseAxis -- ${xyzResults}"
 
 	if (garageSensor == "Yes")
-		results += garageEvent(xyzResults.z)
+		garageEvent(xyzResults.z)
 
-	def value = "${xyzResults.x},${xyzResults.y},${xyzResults.z}"
-	results << [
-			name           : "threeAxis",
-			value          : value,
-			linkText       : getLinkText(device),
-			descriptionText: "${getLinkText(device)} was ${value}",
-			handlerName    : name,
-			isStateChange  : isStateChange(device, "threeAxis", value),
-			displayed      : false
-	]
-	results
-}
-
-private List<Map> parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	List<Map> results = []
-
-	if (garageSensor != "Yes") {
-		def value = zs.isAlarm1Set() ? 'open' : 'closed'
-		log.debug "Contact: ${device.displayName} value = ${value}"
-		def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-		results << [name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true]
-		results << [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
-	}
-
-	return results
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug "Battery rawValue = ${rawValue}"
-
-	def result = [:]
-
-	def volts = rawValue / 10
-
-	if (!(rawValue == 0 || rawValue == 255)) {
-		result.name = 'battery'
-		result.translatable = true
-		result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
-		if (device.getDataValue("manufacturer") == "SmartThings") {
-			volts = rawValue // For the batteryMap to work the key needs to be an int
-			def batteryMap = [28: 100, 27: 100, 26: 100, 25: 90, 24: 90, 23: 70,
-							  22: 70, 21: 50, 20: 50, 19: 30, 18: 30, 17: 15, 16: 1, 15: 0]
-			def minVolts = 15
-			def maxVolts = 28
-
-			if (volts < minVolts)
-				volts = minVolts
-			else if (volts > maxVolts)
-				volts = maxVolts
-			def pct = batteryMap[volts]
-			result.value = pct
-		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
-			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
-			result.value = Math.min(100, roundedPct)
-		}
-	}
-
-	return result
-}
-
-List<Map> garageEvent(zValue) {
-	List<Map> results = []
-	def absValue = zValue.abs()
-	def contactValue = null
-	def garageValue = null
-	if (absValue > 900) {
-		contactValue = 'closed'
-		garageValue = 'garage-closed'
-	} else if (absValue < 100) {
-		contactValue = 'open'
-		garageValue = 'garage-open'
-	}
-	if (contactValue != null) {
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-		results << [name: 'contact', value: contactValue, descriptionText: descriptionText, displayed: false, translatable: true]
-		results << [name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true]
-	}
-	results
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
-def refresh() {
-	log.debug "Refreshing Values "
-
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
-
-	return refreshCmds
-}
-
-def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting"
-	def configCmds = []
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
-	} else {
-		// Write a motion threshold of 2 * .063g = .126g
-		// Currently due to a Centralite firmware issue, this will cause a read attribute response that
-		// indicates acceleration even when there isn't.
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
-	}
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	configCmds += zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300) +
-			zigbee.configureReporting(0xFC02, 0x0010, DataType.BITMAP8, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
-
-	return refresh() + configCmds
-}
-
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
-		} else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
-		}
-	} else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
-		} else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
+	getXyzResult(xyzResults, description)
 }
 
 private hexToSignedInt(hexVal) {
@@ -375,6 +468,44 @@ private hexToSignedInt(hexVal) {
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }
 
+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+	}
+}
+
+private Map getXyzResult(results, description) {
+	def name = "threeAxis"
+	def value = "${results.x},${results.y},${results.z}"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
 private getManufacturerCode() {
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		return "0x110A"
@@ -386,3 +517,25 @@ private getManufacturerCode() {
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,7 +488,12 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
+	else if (zigbee.translateStatusZoneType19(description)) {
+		return "open"
+	}
+	else {
+		return "closed"
+	}
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -0,0 +1,338 @@
+/**
+ *  SmartSense Open/Closed Accelerometer Sensor
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+ metadata {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+ 		capability "Battery"
+ 		capability "Configuration"
+ 		capability "Contact Sensor"
+ 		capability "Acceleration Sensor"
+ 		capability "Refresh"
+ 		capability "Temperature Measurement"
+		capability "Health Check"
+		capability "Sensor"
+
+		command "enrollResponse"
+ 	}
+
+ 	simulator {
+
+ 	}
+
+ 	preferences {
+ 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+		}
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["contact", "acceleration", "temperature"])
+		details(["contact", "acceleration", "temperature", "battery", "refresh"])
+	}
+ }
+
+ def parse(String description) {
+ 	log.debug "description: $description"
+
+ 	Map map = [:]
+ 	if (description?.startsWith('catchall:')) {
+ 		map = parseCatchAllMessage(description)
+ 	}
+ 	else if (description?.startsWith('read attr -')) {
+ 		map = parseReportAttributeMessage(description)
+ 	}
+ 	else if (description?.startsWith('temperature: ')) {
+ 		map = parseCustomMessage(description)
+ 	}
+ 	else if (description?.startsWith('zone status')) {
+ 		map = parseIasMessage(description)
+ 	}
+
+ 	log.debug "Parse returned $map"
+ 	def result = map ? createEvent(map) : null
+
+ 	if (description?.startsWith('enroll request')) {
+ 		List cmds = enrollResponse()
+ 		log.debug "enroll response: ${cmds}"
+ 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+ 	}
+ 	return result
+ }
+
+ private Map parseCatchAllMessage(String description) {
+ 	Map resultMap = [:]
+ 	def cluster = zigbee.parse(description)
+ 	if (shouldProcessMessage(cluster)) {
+ 		switch(cluster.clusterId) {
+ 			case 0x0001:
+ 			resultMap = getBatteryResult(cluster.data.last())
+ 			break
+
+ 			case 0xFC02:
+ 			break
+
+ 			case 0x0402:
+ 			log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+            }
+        }
+
+        return resultMap
+    }
+
+    private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    cluster.command == 0x0B ||
+    cluster.command == 0x07 ||
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+	return Math.round(Double.parseDouble(value))
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0002") {
+		Integer.parseInt(descMap.value,8)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+		} else {
+			return celsiusToFahrenheit(celsius) as Integer
+		}
+	}
+
+	private Map getBatteryResult(rawValue) {
+		log.debug 'Battery'
+		def linkText = getLinkText(device)
+
+		def result = [
+		name: 'battery'
+		]
+
+		def volts = rawValue / 10
+		def descriptionText
+        if (rawValue == 0 || rawValue == 255) {}
+		else if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else {
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
+			result.value = Math.min(100, roundedPct)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
+
+		return result
+	}
+
+	private Map getTemperatureResult(value) {
+		log.debug 'TEMP'
+		def linkText = getLinkText(device)
+		if (tempOffset) {
+			def offset = tempOffset as int
+			def v = value as int
+			value = v + offset
+		}
+		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+		return [
+			name: 'temperature',
+			value: value,
+			descriptionText: descriptionText,
+			unit: temperatureScale
+		]
+	}
+
+	private Map getContactResult(value) {
+		log.debug 'Contact Status'
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+		return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+		]
+	}
+
+	private getAccelerationResult(numValue) {
+		def name = "acceleration"
+		def value = numValue.endsWith("1") ? "active" : "inactive"
+		//def linkText = getLinkText(device)
+		def descriptionText = "$linkText was $value"
+		def isStateChange = isStateChange(device, name, value)
+		[
+			name: name,
+			value: value,
+			//unit: null,
+			//linkText: linkText,
+			descriptionText: descriptionText,
+			//handlerName: value,
+			isStateChange: isStateChange
+		//	displayed: displayed(description, isStateChange)
+		]
+	}
+
+	def refresh() {
+		log.debug "Refreshing Temperature and Battery "
+		def refreshCmds = [
+
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+
+		]
+
+		return refreshCmds + enrollResponse()
+	}
+
+def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Smartsense Open/Closed Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -24,11 +24,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Open Closed sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkInterval
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition(name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -43,107 +43,197 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main(["contact", "temperature"])
-		details(["contact", "temperature", "battery", "refresh"])
+		main (["contact", "temperature"])
+		details(["contact","temperature","battery","refresh"])
 	}
 }
 
 def parse(String description) {
 	log.debug "description: $description"
 
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
 	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
 
 	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
+	def result = map ? createEvent(map) : null
 
-	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
 	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
 	}
 
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
 private Map getContactResult(value) {
 	log.debug 'Contact Status'
 	def linkText = getLinkText(device)
 	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
 	return [
-			name           : 'contact',
-			value          : value,
-			descriptionText: descriptionText
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
 	]
 }
 
@@ -156,20 +246,65 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+	def refreshCmds = [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
 
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -1,6 +1,6 @@
 # SmartSense Temp/Humidity Sensor
 
-Local Execution on V2 Hubs
+
 
 Works with: 
 
@@ -24,11 +24,10 @@ Works with:
 
 ## Device Health
 
-SmartSense Temp/Humidity Sensor with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* V1, TV, HubV2 AppEngine < 1.5.1 - __121min__ checkInterval
-* HubV2 AppEngine 1.5.1 - __12min__ checkIntervalr 5 min interval is confirmed
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -13,10 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
-
 metadata {
-	definition(name: "SmartSense Temp/Humidity Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -33,7 +31,7 @@ metadata {
 		status 'H 45': 'catchall: 0104 FC45 01 01 0140 00 D9B9 00 04 C2DF 0A 01 0000218911'
 		status 'H 57': 'catchall: 0104 FC45 01 01 0140 00 4E55 00 04 C2DF 0A 01 0000211316'
 		status 'H 53': 'catchall: 0104 FC45 01 01 0140 00 20CD 00 04 C2DF 0A 01 0000219814'
-		status 'H 43': 'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
+		status 'H 43':  'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
 	}
 
 	preferences {
@@ -42,28 +40,28 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name: "temperature", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState "temperature", label: '${currentValue}°',
-						backgroundColors: [
-								[value: 31, color: "#153591"],
-								[value: 44, color: "#1e9cbb"],
-								[value: 59, color: "#90d2a7"],
-								[value: 74, color: "#44b621"],
-								[value: 84, color: "#f1d801"],
-								[value: 95, color: "#d04e00"],
-								[value: 96, color: "#bc2323"]
-						]
+		multiAttributeTile(name:"temperature", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState "temperature", label:'${currentValue}°',
+					backgroundColors:[
+						[value: 31, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 95, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+					]
 			}
 		}
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label: '${currentValue}% humidity', unit: ""
+			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery'
+			state "battery", label:'${currentValue}% battery'
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main "temperature", "humidity"
@@ -74,75 +72,231 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	// getEvent will handle temperature and humidity
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		Map descMap = zigbee.parseDescriptionAsMap(description)
-		if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-			map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-		} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-			if (descMap.data[0] == "00") {
-				log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
-				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
 	}
 
 	log.debug "Parse returned $map"
-	return map ? createEvent(map) : [:]
+	return map ? createEvent(map) : null
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+
+			case 0xFC45:
+                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+                resultMap = getHumidityResult(display)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "FC45" && descMap.attrId == "0000") {
+		def value = getReportAttributeHumidity(descMap.value)
+		resultMap = getHumidityResult(value)
+	}
+
+	return resultMap
+}
+
+def getReportAttributeHumidity(String value) {
+    def humidity = null
+    if (value?.trim()) {
+        try {
+        	// value is hex with no decimal
+            def pct = Integer.parseInt(value.trim(), 16) / 100
+            humidity = String.format('%.0f', pct)
+        } catch(NumberFormatException nfe) {
+            log.debug "Error converting $value to humidity"
+        }
+    }
+    return humidity
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	else if (description?.startsWith('humidity: ')) {
+		def pct = (description - "humidity: " - "%").trim()
+		if (pct.isNumber()) {
+			def value = Math.round(new BigDecimal(pct)).toString()
+			resultMap = getHumidityResult(value)
+		} else {
+			log.error "invalid humidity: ${pct}"
+		}
+	}
+	return resultMap
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
 }
 
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-  def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
 	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
-
 	}
 
 	return result
 }
 
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getHumidityResult(value) {
+	log.debug 'Humidity'
+	return [
+		name: 'humidity',
+		value: value,
+		unit: '%'
+	]
+}
+
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x0001, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
-def refresh() {
+def refresh()
+{
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+	[
+
+		"zcl mfg-code 0xC2DF", "delay 1000",
+		"zcl global read 0xFC45 0", "delay 1000",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+
+	]
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
+	def humidityConfigCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -15,10 +15,9 @@ metadata {
 	definition (name: "Simulated Minimote", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-
+        
         command "push1"
         command "push2"
         command "push3"
@@ -46,42 +45,42 @@ metadata {
 		}
  		standardTile("push1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 1", backgroundColor: "#ffffff", action: "push1"
-		}
+		} 
  		standardTile("push2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 2", backgroundColor: "#ffffff", action: "push2"
-		}
+		} 
  		standardTile("push3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 3", backgroundColor: "#ffffff", action: "push3"
-		}
+		} 
  		standardTile("push4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Push 4", backgroundColor: "#ffffff", action: "push4"
-		}
+		} 
  		standardTile("dummy1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}
+		}         
  		standardTile("hold1", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 1", backgroundColor: "#ffffff", action: "hold1"
-		}
+		}          
  		standardTile("hold2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 2", backgroundColor: "#ffffff", action: "hold2"
-		}
+		}          
  		standardTile("dummy2", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: " ", backgroundColor: "#ffffff", action: "push4"
-		}
+		}         
  		standardTile("hold3", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 3", backgroundColor: "#ffffff", action: "hold3"
-		}
+		}          
  		standardTile("hold4", "device.button", width: 1, height: 1, decoration: "flat") {
 			state "default", label: "Hold 4", backgroundColor: "#ffffff", action: "hold4"
-		}
-
+		}          
+        
 		main "button"
 		details(["push1","push2","button","push3","push4","dummy1","hold1","hold2","dummy2","hold3","hold4"])
 	}
 }
 
 def parse(String description) {
-
+	
 }
 
 def push1() {
@@ -126,15 +125,3 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-
+	
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
@@ -39,7 +39,9 @@ metadata {
 	}
 }
 
-def parse(description) {
+def parse(String description) {
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
 }
 
 def on() {

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,6 +1,6 @@
 # Tyco Door Window Sensor
 
-Cloud Execution
+
 
 Works with: 
 
@@ -23,11 +23,10 @@ Works with:
 
 ## Device Health
 
-Tyco Door Window Sensor with reporting interval of 5 mins.
+Contact sensor with maxReportTime of 5 mins.
 Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-
-* __12min__ checkInterval
+Check-in interval = 12 min
 
 ## Battery Specification
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -181,17 +181,22 @@ private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+    def result = [
+    	name: 'battery'
+    ]
 
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def volts = rawValue / 10
+	def volts = rawValue / 10
+	def descriptionText
+	if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
 		def minVolts = 2.1
-		def maxVolts = 3.0
+    	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
 	}
 
 	return result

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+		def body = new XmlSlurper().parseText(bodyString)
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -84,7 +84,7 @@ def parse(String description) {
     def bodyString = msg.body
     if (bodyString) {
     	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
+        def body = new XmlSlurper().parseText(bodyString)
  		if (body?.property?.TimeSyncRequest?.text()) {
         	log.trace "Got TimeSyncRequest"
         	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,14 +13,12 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
         capability "Actuator"
         capability "Battery"
         capability "Button"
-        capability "Holdable Button"        
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
@@ -29,8 +27,8 @@ metadata {
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
     simulator {}
@@ -83,7 +81,7 @@ def parse(String description) {
         def result = event ? createEvent(event) : []
 
         if (description?.startsWith('enroll request')) {
-            List cmds = zigbee.enrollResponse()
+            List cmds = enrollResponse()
             result = cmds?.collect { new physicalgraph.device.HubAction(it) }
         }
         return result
@@ -91,8 +89,14 @@ def parse(String description) {
 }
 
 private Map parseIasButtonMessage(String description) {
-    def zs = zigbee.parseZoneStatus(description)
-    return zs.isAlarm2Set() ? getButtonResult("press") : getButtonResult("release")
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
 }
 
 private Map getBatteryResult(rawValue) {
@@ -118,38 +122,15 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
     def buttonState = ""
     def buttonNumber = 0
-    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
             getButtonResult("press")
         }
-        else if (descMap.commandInt == 0) {
+        else if (descMap.command == "00") {
             getButtonResult("release")
         }
     }
-    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
-            getButtonResult("press")
-        }
-        else if (descMap.commandInt == 0) {
-            def button = 1
-            switch(descMap.sourceEndpoint) {
-                case "01":
-                    button = 4
-                    break
-                case "02":
-                    button = 3
-                    break
-                case "03":
-                    button = 1
-                    break
-                case "04":
-                    button = 2
-                    break
-            }
-        
-            getButtonResult("release", button)
-        }
-    }
     else if (descMap.clusterInt == 0x0006) {
         buttonState = "pushed"
         if (descMap.command == "01") {
@@ -184,7 +165,7 @@ private Map parseNonIasButtonMessage(Map descMap){
 def refresh() {
     log.debug "Refreshing Battery"
 
-    return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+    return zigbee.readAttribute(0x0001, 0x20) +
             zigbee.enrollResponse()
 }
 
@@ -201,9 +182,9 @@ def configure() {
     }
     return zigbee.onOffConfig() +
             zigbee.levelConfig() +
-            zigbee.configureReporting(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20, DataType.UINT8, 30, 21600, 0x01) +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
             zigbee.enrollResponse() +
-            zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+            zigbee.readAttribute(0x0001, 0x20) +
             cmds
 
 }

devicetypes/smartthings/zigbee-dimmer-power.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -1,42 +0,0 @@
-# GE Plug-In/In-Wall Smart Dimmer (ZigBee)
-
-Cloud Execution
-
-Works with:
-
-* [GE In-Wall Smart Dimmer (ZigBee)](https://shop.smartthings.com/#!/products/ge-in-wall-smart-dimmer-switch)
-* [GE Plug-In Smart Dimmer (ZigBee)](https://www.smartthings.com/works-with-smartthings/ge/ge-plug-in-smart-dimmer-zigbee)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Power Meter** - ability to check the power meter(energy consumption) of device
-* **Sensor** - represents the device sensor capability
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
-
-## Device Health
-
-A Zigbee Power Dimmer with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [GE Z-Wave In-Wall Smart Dimmer (GE 45857) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204988564-GE-In-Wall-Smart-Dimmer-45857GE-ZigBee-)
-* [GE Zigbee Plug-in Smart Dimmer (GE 45852) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205239280-GE-Plug-In-Smart-Dimmer-45852GE-ZigBee-)

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -21,8 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -72,20 +70,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbee.parseDescriptionAsMap(description)
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -98,25 +84,14 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + (value?.toInteger() > 0 ? zigbee.on() : [])
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.onOffRefresh()
+    zigbee.setLevel(value)
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,11 +1,10 @@
-# Zigbee Dimmer
+# OSRAM Lightify LED On/Off/Dim
+
 
-Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
-* [WeMo LED Bulb](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
 
 ## Table of contents
 
@@ -24,16 +23,14 @@ Works with:
 
 ## Device Health
 
-ZigBee Dimmer with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __12min__ checkInterval
-
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [OSRAM Lightify LED On/Off/Dim Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
-* [WeMo LED Bulb Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,26 +13,19 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "E11-G13", deviceJoinName: "Sengled Element Classic"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
     }
 
     tiles(scale: 2) {
@@ -67,21 +60,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -94,13 +74,7 @@ def on() {
 }
 
 def setLevel(value) {
-    def additionalCmds = []
-    if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
-        additionalCmds = zigbee.on()
-    } else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
-        additionalCmds = refresh()
-    }
-    zigbee.setLevel(value) + additionalCmds
+    zigbee.setLevel(value)
 }
 /**
  * PING is used by Device-Watch in attempt to reach the Device
@@ -110,23 +84,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def installed() {
-    if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
-        if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
-            sendEvent(name: "level", value: 100)
-        }
-    }
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -0,0 +1,243 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
+/* Philips Hue (via Zigbee)
+
+Capabilities:
+  Actuator
+  Color Control
+  Configuration
+  Polling
+  Refresh
+  Sensor
+  Switch
+  Switch Level
+
+Custom Commands:
+  setAdjustedColor
+
+*/
+
+metadata {
+	definition (name: "Zigbee Hue Bulb", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Switch"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setAdjustedColor"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+
+		main(["switch"])
+		details(["switch", "levelSliderControl", "rgbSelector", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	//log.trace description
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		//log.trace msg
+		//log.trace "data: $msg.data"
+	}
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+	}
+}
+
+def on() {
+	// just assume it works for now
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+}
+
+def off() {
+	// just assume it works for now
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+}
+
+def setHue(value) {
+	def max = 0xfe
+	log.trace "setHue($value)"
+	sendEvent(name: "hue", value: value)
+	def scaledValue = Math.round(value * max / 100.0)
+	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledValue)} 00 0000}"
+	//log.info cmd
+	cmd
+}
+
+def setAdjustedColor(value) {
+	log.debug "setAdjustedColor: ${value}"
+	def adjusted = value + [:]
+	adjusted.hue = adjustOutgoingHue(value.hue)
+	adjusted.level = null // needed because color picker always sends 100
+	setColor(adjusted)
+}
+
+def setColor(value){
+	log.trace "setColor($value)"
+	def max = 0xfe
+
+	sendEvent(name: "hue", value: value.hue)
+	sendEvent(name: "saturation", value: value.saturation)
+	def scaledHueValue = Math.round(value.hue * max / 100.0)
+	def scaledSatValue = Math.round(value.saturation * max / 100.0)
+
+	def cmd = []
+	if (value.switch != "off" && device.latestValue("switch") == "off") {
+		cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+		cmd << "delay 150"
+	}
+
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x00 {${hex(scaledHueValue)} 00 0000}"
+	cmd << "delay 150"
+	cmd << "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledSatValue)} 0000}"
+
+	if (value.level != null) {
+		cmd << "delay 150"
+		cmd.addAll(setLevel(value.level))
+	}
+
+	if (value.switch == "off") {
+		cmd << "delay 150"
+		cmd << off()
+	}
+	log.info cmd
+	cmd
+}
+
+def setSaturation(value) {
+	def max = 0xfe
+	log.trace "setSaturation($value)"
+	sendEvent(name: "saturation", value: value)
+	def scaledValue = Math.round(value * max / 100.0)
+	def cmd = "st cmd 0x${device.deviceNetworkId} ${endpointId} 0x300 0x03 {${hex(scaledValue)} 0000}"
+	//log.info cmd
+	cmd
+}
+
+def refresh() {
+	"st rattr 0x${device.deviceNetworkId} 1 6 0"
+}
+
+def poll(){
+	log.debug "Poll is calling refresh"
+	refresh()
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+	//log.debug cmds
+	cmds
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -13,8 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
-
  metadata {
     definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
     {
@@ -73,6 +71,9 @@ private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
 private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
 
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Public methods
 def installed() {
     log.trace "installed()"
@@ -85,11 +86,11 @@ def uninstalled() {
 def configure() {
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
-                                  DataType.ENUM8, 0, 3600, null) +
+                                  TYPE_ENUM8, 0, 3600, null) +
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
-                                  DataType.UINT8, 600, 21600, 0x01)
+                                  TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
-    return refresh() + cmds // send refresh cmds as part of config
+    return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,156 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Author: SmartThings
- *  Date: 2016-01-19
- *
- *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
- */
-import physicalgraph.zigbee.zcl.DataType
-
-metadata {
-	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-		capability "Health Check"
-		capability "Light"
-
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.debug event
-		if (event.name=="level" && event.value==0) {}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		def cluster = zigbee.parse(description)
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-			}
-		}
-		else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-			if (cluster.data[0] == 0x00){
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-			log.debug zigbeeMap
-		}
-	}
-}
-
-def on() {
-	zigbee.on()
-}
-
-def off() {
-	zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.onOffRefresh()
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,6 +1,6 @@
 # OSRAM LIGHTIFY LED RGBW Bulb
 
-Cloud Execution
+
 
 Works with: 
 
@@ -27,10 +27,11 @@ Works with:
 
 ## Device Health
 
-OSRAM LIGHTIFY LED RGBW Bulb with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
-* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -15,10 +15,9 @@
  *
  *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"
@@ -29,17 +28,15 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
     }
 
     // UI tile definitions
@@ -98,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
+        log.trace "zigbeeMap : $zigbeeMap"
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -110,18 +107,8 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
         }
     }
 }
@@ -141,17 +128,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -192,5 +177,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -20,8 +20,6 @@ metadata {
         capability "Power Meter"
         capability "Sensor"
         capability "Switch"
-        capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
@@ -79,28 +77,10 @@ def on() {
 }
 
 def refresh() {
-    Integer reportIntervalMinutes = 5
-    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig(0,reportIntervalMinutes * 60) + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
+    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
 }
 
 def configure() {
-    log.debug "in configure()"
-    return configureHealthCheck()
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    return refresh()
-}
-
-def updated() {
-    log.debug "in updated()"
-    // updated() doesn't have it's return value processed as hub commands, so we have to send them explicitly
-    def cmds = configureHealthCheck()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it)) }
-}
-
-def ping() {
-    return zigbee.onOffRefresh()
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -21,9 +21,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15S", deviceJoinName: "Leviton Lumina RF Switch"
     }
 
     // simulator metadata
@@ -81,5 +78,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffRefresh() + zigbee.onOffConfig()
+    zigbee.onOffConfig() + zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
@@ -67,6 +66,8 @@ private getCLUSTER_BASIC() { 0x0000 }
 private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
 private getCLUSTER_POWER() { 0x0001 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
@@ -127,11 +128,16 @@ def refresh() {
     zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
     zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
     zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, DataType.UINT8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, DataType.ENUM8, 5, 21600, 1)
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,11 +1,10 @@
-# ZigBee White Color Temperature Bulb
+# OSRAM Lightify Tunable 60 White
+
 
-Cloud Execution
 
 Works with: 
 
 * [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
-* [OSRAM LIGHTIFY RT5/6 Tunable White](https://www.smartthings.com/works-with-smartthings/light-bulbs/osram-lightify-rt56-tunable-white)
 
 ## Table of contents
 
@@ -25,15 +24,14 @@ Works with:
 
 ## Device Health
 
-Zigbee Bulb with reporting interval of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-*__12min__ checkInterval
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [OSRAM Lightify Tunable 60 White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
-* [OSRAM LIGHTIFY RT5/6 Tunable White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/214191863-How-to-connect-OSRAM-LIGHTIFY-Bulbs)
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -26,19 +26,17 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -85,21 +83,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -123,17 +108,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +21,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -89,7 +85,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {
@@ -100,38 +96,7 @@ def poll() {
     refresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = refresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
-}

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,135 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import physicalgraph.zigbee.zcl.DataType
-
-metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = zigbee.getEvent(description)
-	if (finalResult) {
-		log.debug finalResult
-		sendEvent(finalResult)
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		log.trace "zigbeeMap : $zigbeeMap"
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-				sendEvent(name: "hue", value: hueValue, displayed:false)
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, displayed:false)
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-		}
-	}
-}
-
-def on() {
-	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-	refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-	refreshAttributes()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -28,10 +27,6 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions
@@ -124,11 +119,11 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -136,7 +131,7 @@ def setColorTemperature(value) {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){
@@ -146,10 +141,10 @@ def setColor(value){
 
 def setHue(value) {
     def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -25,14 +22,12 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions
@@ -90,7 +85,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
 }
 
 def refresh() {
@@ -101,41 +96,9 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -1,54 +0,0 @@
-# Z-wave Dimmer Switch Generic
-
-Cloud Execution
-
-Works with: 
-
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
-* [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-wave) and Leviton Universal Dimmer (DZMX1-LZ) (Z-Wave) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -15,22 +15,12 @@ metadata {
 	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
-		capability "Health Check"
 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
-		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
-		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {
@@ -78,11 +68,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -200,13 +185,6 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-relay.src/zwave-relay.groovy

@@ -81,7 +81,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, displayed: false]
+	[name: "indicatorStatus", value: value, display: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {

devicetypes/smartthings/zwave-switch-generic.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -1,45 +0,0 @@
-# Z-wave Switch
-
-Cloud Execution
-
-Works with: 
-
-* [Leviton Appliance Module (DZPA1-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-appliance-module)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://www.smartthings.com/works-with-smartthings/outlets/ge-plug-in-outdoor-smart-switch)
-* [Leviton Outlet (DZR15-1LZ)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-outlet)
-* [Leviton Switch (DZS15-1LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-switch)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-Leviton Appliance Module (DZPA1-1LW), GE Plug-In Outdoor Smart Switch (GE 12720), Leviton Outlet (DZR15-1LZ) and Leviton Switch (DZS15-1LZ) (Z-Wave) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
-* [Leviton Outlet (DZR15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Switch (DZS15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -14,23 +14,12 @@
 metadata {
 	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
  		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
-		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
-		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
-		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
-		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata
@@ -61,11 +50,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -142,13 +126,6 @@ def poll() {
 	])
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),

devicetypes/smartthings/zwave-switch.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-switch.src/README.md

@@ -1,51 +0,0 @@
-# Z-Wave Switch
-
-Local Execution on V2 Hubs
-
-Works with: 
-
-* [GE Z-Wave Plug-In Smart Switch (12719)](http://products.z-wavealliance.org/products/1193)
-* [GE Z-Wave In-Wall Smart Outlet (12721)](http://products.z-wavealliance.org/products/1195)
-* [GE Z-Wave In-Wall Smart Switch (12722)](http://products.z-wavealliance.org/products/1196)
-* [GE Z-Wave In-Wall Smart Toggle Switch (12727)](http://products.z-wavealliance.org/products/1200)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Z-Wave Switches (Plug-In, In-Wall(Toggle Switch, Switch, Outlet)) are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [General Z-Wave Dimmer/Switch Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
-* [GE Z-Wave Plug-In Smart Switch (12719) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903070-GE-Plug-In-Smart-Switch-GE-12719-Z-Wave)
-* [GE Z-Wave In-Wall Smart Outlet (12721) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200903020-GE-In-Wall-Smart-Outlet-GE-12721-Z-Wave)
-* [GE Z-Wave In-Wall Smart Switch (12722) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/200902540-GE-In-Wall-Smart-Switch-GE-12722-Z-Wave)
-* [GE Z-Wave In-Wall Smart Toggle Switch (12727) Troubleshooting](https://support.smartthings.com/hc/en-us/articles/207568933-GE-In-Wall-Smart-Toggle-Switch-GE-12727-Z-Wave)
-
-

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -19,8 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
@@ -66,8 +64,6 @@ metadata {
 }
 
 def updated(){
-		// Device-Watch simply pings if no device events received for 32min(checkInterval)
-		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -115,7 +111,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, displayed: false]
+	[name: "indicatorStatus", value: value, display: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
@@ -160,13 +156,6 @@ def poll() {
 	])
 }
 
-/**
-  * PING is used by Device-Watch in attempt to reach the Device
-**/
-def ping() {
-		refresh()
-}
-
 def refresh() {
 	delayBetween([
 		zwave.switchBinaryV1.switchBinaryGet().format(),
@@ -175,17 +164,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -5,6 +5,7 @@ import java.text.DecimalFormat
 import groovy.json.JsonSlurper
 
 private getApiUrl()			{ "https://api.netatmo.com" }
+private getVendorName()		{ "netatmo" }
 private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
 private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
@@ -13,13 +14,14 @@ private getClientSecret()	{ appSettings.clientSecret }
 private getServerUrl() 		{ appSettings.serverUrl }
 private getShardUrl()		{ return getApiServerUrl() }
 private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
-private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}&apiServerUrl=${shardUrl}" }
+private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
 
+// Automatically generated. Make future change here.
 definition(
 	name: "Netatmo (Connect)",
 	namespace: "dianoga",
 	author: "Brian Steere",
-	description: "Integrate your Netatmo devices with SmartThings",
+	description: "Netatmo Integration",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
@@ -42,16 +44,15 @@ mappings {
 }
 
 def authPage() {
-	// log.debug "running authPage()"
+	log.debug "In authPage"
 
 	def description
 	def uninstallAllowed = false
 	def oauthTokenProvided = false
 
-	// If an access token doesn't exist, create one
-	if (!atomicState.accessToken) {
-		atomicState.accessToken = createAccessToken()
-        log.debug "Created access token"
+	if (!state.accessToken) {
+		log.debug "About to create access token."
+		state.accessToken = createAccessToken()
 	}
 
 	if (canInstallLabs()) {
@@ -59,32 +60,36 @@ def authPage() {
 		def redirectUrl = getBuildRedirectUrl()
 		// log.debug "Redirect url = ${redirectUrl}"
 
-		if (atomicState.authToken) {
-			description = "Tap 'Next' to select devices"
+		if (state.authToken) {
+			description = "Tap 'Next' to proceed"
 			uninstallAllowed = true
 			oauthTokenProvided = true
 		} else {
-			description = "Tap to enter credentials"
+			description = "Click to enter Credentials."
 		}
 
 		if (!oauthTokenProvided) {
-			log.debug "Showing the login page"
+			log.debug "Show the login page"
 			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
 				section() {
-					paragraph "Tap below to login to Netatmo and authorize SmartThings access"
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to Netatmo", description:description
+					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
+					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
 				}
 			}
 		} else {
-			log.debug "Showing the devices page"
-			return dynamicPage(name: "Credentials", title: "Connected", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
+			log.debug "Show the devices page"
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
 				section() {
-					input(name:"Devices", style:"embedded", required:false, title:"Netatmo is connected to SmartThings", description:description) 
+					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
 				}
 			}
 		}
 	} else {
-		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date. To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+
 		return dynamicPage(name:"Credentials", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
 			section {
 				paragraph "$upgradeNeeded"
@@ -95,15 +100,15 @@ def authPage() {
 }
 
 def oauthInitUrl() {
-	// log.debug "runing oauthInitUrl()"
+	log.debug "In oauthInitUrl"
 
-	atomicState.oauthInitState = UUID.randomUUID().toString()
+	state.oauthInitState = UUID.randomUUID().toString()
 
 	def oauthParams = [
 		response_type: "code",
 		client_id: getClientId(),
 		client_secret: getClientSecret(),
-		state: atomicState.oauthInitState,
+		state: state.oauthInitState,
 		redirect_uri: getCallbackUrl(),
 		scope: "read_station"
 	]
@@ -114,72 +119,73 @@ def oauthInitUrl() {
 }
 
 def callback() {
-	// log.debug "running callback()"
+	// log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
 
-	if (oauthState == atomicState.oauthInitState) {
+	if (oauthState == state.oauthInitState) {
 
 		def tokenParams = [
-        	grant_type: "authorization_code",
 			client_secret: getClientSecret(),
 			client_id : getClientId(),
+			grant_type: "authorization_code",
+			redirect_uri: getCallbackUrl(),
 			code: code,
-			scope: "read_station",
-            redirect_uri: getCallbackUrl()
+			scope: "read_station"
 		]
 
 		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
-		def requestTokenParams = [
+		def params = [
 			uri: tokenUrl,
-			requestContentType: 'application/x-www-form-urlencoded',
+			contentType: 'application/x-www-form-urlencoded',
 			body: tokenParams
 		]
-    
-		// log.debug "PARAMS: ${requestTokenParams}"
 
-		try {
-            httpPost(requestTokenParams) { resp ->
-                //log.debug "Data: ${resp.data}"
-                atomicState.refreshToken = resp.data.refresh_token
-                atomicState.authToken = resp.data.access_token
-                // resp.data.expires_in is in milliseconds so we need to convert it to seconds
-                atomicState.tokenExpires = now() + (resp.data.expires_in * 1000)
-            }
-        } catch (e) {
-			      log.debug "callback() failed: $e"
-        }
+		// log.debug "PARAMS: ${params}"
 
-		// If we successfully got an authToken run sucess(), else fail()
-		if (atomicState.authToken) {
+		httpPost(params) { resp ->
+
+			def slurper = new JsonSlurper()
+
+			resp.data.each { key, value ->
+				def data = slurper.parseText(key)
+
+				state.refreshToken = data.refresh_token
+				state.authToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
+				// log.debug "swapped token: $resp.data"
+			}
+		}
+
+		// Handle success and failure here, and render stuff accordingly
+		if (state.authToken) {
 			success()
 		} else {
 			fail()
 		}
 
 	} else {
-		log.error "callback() failed oauthState != atomicState.oauthInitState"
+		log.error "callback() failed oauthState != state.oauthInitState"
 	}
 }
 
 def success() {
-	log.debug "OAuth flow succeeded"
+	log.debug "in success"
 	def message = """
-	<p>Success!</p>
-	<p>Tap 'Done' to continue</p>
+	<p>We have located your """ + getVendorName() + """ account.</p>
+	<p>Tap 'Done' to continue to Devices.</p>
 	"""
 	connectionStatus(message)
 }
 
 def fail() {
-	log.debug "OAuth flow failed"
-    atomicState.authToken = null
+	log.debug "in fail"
 	def message = """
-	<p>Error</p>
-	<p>Tap 'Done' to return</p>
+	<p>The connection could not be established!</p>
+	<p>Click 'Done' to return to the menu.</p>
 	"""
 	connectionStatus(message)
 }
@@ -191,12 +197,13 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
+
 	def html = """
 		<!DOCTYPE html>
 		<html>
 		<head>
 		<meta name="viewport" content="width=device-width, initial-scale=1">
-		<title>Netatmo Connection</title>
+		<title>${getVendorName()} Connection</title>
 		<style type="text/css">
 			* { box-sizing: border-box; }
 			@font-face {
@@ -222,6 +229,7 @@ def connectionStatus(message, redirectUrl = null) {
 			.container {
 				width: 100%;
 				padding: 40px;
+				/*background: #eee;*/
 				text-align: center;
 			}
 			img {
@@ -237,9 +245,14 @@ def connectionStatus(message, redirectUrl = null) {
 				color: #666666;
 				margin-bottom: 0;
 			}
+			/*
+			p:last-child {
+				margin-top: 0px;
+			}
+			*/
 			span {
 				font-family: 'Swiss 721 W01 Light';
-			}
+				}
 		</style>
 		</head>
 		<body>
@@ -256,47 +269,46 @@ def connectionStatus(message, redirectUrl = null) {
 }
 
 def refreshToken() {
-	// Check if atomicState has a refresh token
-	if (atomicState.refreshToken) {
-        log.debug "running refreshToken()"
+	log.debug "In refreshToken"
 
-        def oauthParams = [
-            grant_type: "refresh_token",
-            refresh_token: atomicState.refreshToken,
-            client_secret: getClientSecret(),
-            client_id: getClientId(),
-        ]
+	def oauthParams = [
+		client_secret: getClientSecret(),
+		client_id: getClientId(),
+		grant_type: "refresh_token",
+		refresh_token: state.refreshToken
+	]
 
-        def tokenUrl = getVendorTokenPath()
-        
-        def requestOauthParams = [
-            uri: tokenUrl,
-            requestContentType: 'application/x-www-form-urlencoded',
-            body: oauthParams
-        ]
-        
-        // log.debug "PARAMS: ${requestOauthParams}"
+	def tokenUrl = getVendorTokenPath()
+	def params = [
+		uri: tokenUrl,
+		contentType: 'application/x-www-form-urlencoded',
+		body: oauthParams,
+	]
 
-        try {
-            httpPost(requestOauthParams) { resp ->
-            	//log.debug "Data: ${resp.data}"
-                atomicState.refreshToken = resp.data.refresh_token
-                atomicState.authToken = resp.data.access_token
-                // resp.data.expires_in is in milliseconds so we need to convert it to seconds
-                atomicState.tokenExpires = now() + (resp.data.expires_in * 1000)
-                return true
-            }
-        } catch (e) {
-            log.debug "refreshToken() failed: $e"
-        }
+	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
+	try {
+		httpPost(params) { response ->
+			def slurper = new JsonSlurper();
 
-        // If we didn't get an authToken
-        if (!atomicState.authToken) {
-            return false
-        }
-	} else {
-    	return false
-    }
+			response.data.each {key, value ->
+				def data = slurper.parseText(key);
+				// log.debug "Data: $data"
+
+				state.refreshToken = data.refresh_token
+				state.accessToken = data.access_token
+				state.tokenExpires = now() + (data.expires_in * 1000)
+				return true
+			}
+
+		}
+	} catch (Exception e) {
+		log.debug "Error: $e"
+	}
+
+	// We didn't get an access token
+	if ( !state.accessToken ) {
+		return false
+	}
 }
 
 String toQueryString(Map m) {
@@ -305,11 +317,13 @@ String toQueryString(Map m) {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
+
 	initialize()
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
+
 	unsubscribe()
 	unschedule()
 	initialize()
@@ -317,9 +331,9 @@ def updated() {
 
 def initialize() {
 	log.debug "Initialized with settings: ${settings}"
-    
+
 	// Pull the latest device info into state
-	getDeviceList()
+	getDeviceList();
 
 	settings.devices.each {
 		def deviceId = it
@@ -353,56 +367,57 @@ def initialize() {
 	def delete = getChildDevices().findAll { !settings.devices.contains(it.deviceNetworkId) }
 	log.debug "Delete: $delete"
 	delete.each { deleteChildDevice(it.deviceNetworkId) }
-    
-	// Run initial poll and schedule future polls
+
+	// Do the initial poll
 	poll()
+	// Schedule it to run every 5 minutes
 	runEvery5Minutes("poll")
 }
 
 def uninstalled() {
-	log.debug "Uninstalling"
+	log.debug "In uninstalled"
+
 	removeChildDevices(getChildDevices())
 }
 
 def getDeviceList() {
-	if (atomicState.authToken) {
-    
-        log.debug "Getting stations data"
+	log.debug "In getDeviceList"
 
-        def deviceList = [:]
-        state.deviceDetail = [:]
-        state.deviceState = [:]
+	def deviceList = [:]
+	state.deviceDetail = [:]
+	state.deviceState = [:]
 
-        apiGet("/api/getstationsdata") { resp ->
-            resp.data.body.devices.each { value ->
-                def key = value._id
-                deviceList[key] = "${value.station_name}: ${value.module_name}"
-                state.deviceDetail[key] = value
-                state.deviceState[key] = value.dashboard_data
-                value.modules.each { value2 ->            
-                    def key2 = value2._id
-                    deviceList[key2] = "${value.station_name}: ${value2.module_name}"
-                    state.deviceDetail[key2] = value2
-                    state.deviceState[key2] = value2.dashboard_data            
-                }
-            }
-        }
-        
-        return deviceList.sort() { it.value.toLowerCase() }
-        
-	} else {
-    	return null
-  }
+	apiGet("/api/devicelist") { response ->
+		response.data.body.devices.each { value ->
+			def key = value._id
+			deviceList[key] = "${value.station_name}: ${value.module_name}"
+			state.deviceDetail[key] = value
+            state.deviceState[key] = value.dashboard_data
+		}
+		response.data.body.modules.each { value ->
+			def key = value._id
+			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
+			state.deviceDetail[key] = value
+            state.deviceState[key] = value.dashboard_data
+		}
+	}
+
+	return deviceList.sort() { it.value.toLowerCase() }
 }
 
 private removeChildDevices(delete) {
-	log.debug "Removing ${delete.size()} devices"
+	log.debug "In removeChildDevices"
+
+	log.debug "deleting ${delete.size()} devices"
+
 	delete.each {
 		deleteChildDevice(it.deviceNetworkId)
 	}
 }
 
 def createChildDevice(deviceFile, dni, name, label) {
+	log.debug "In createChildDevice"
+
 	try {
 		def existingDevice = getChildDevice(dni)
 		if(!existingDevice) {
@@ -417,13 +432,13 @@ def createChildDevice(deviceFile, dni, name, label) {
 }
 
 def listDevices() {
-	log.debug "Listing devices"
+	log.debug "In listDevices"
 
 	def devices = getDeviceList()
 
-	dynamicPage(name: "listDevices", title: "Choose Devices", install: true) {
+	dynamicPage(name: "listDevices", title: "Choose devices", install: true) {
 		section("Devices") {
-			input "devices", "enum", title: "Select Devices", required: false, multiple: true, options: devices
+			input "devices", "enum", title: "Select Device(s)", required: false, multiple: true, options: devices
 		}
 
         section("Preferences") {
@@ -433,36 +448,30 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-	log.debug "running apiGet()"
-    
-    // If the current time is over the expiration time, request a new token
-	if(now() >= atomicState.tokenExpires) {
-    	atomicState.authToken = null
-		refreshToken()
+	if(now() >= state.tokenExpires) {
+		refreshToken();
 	}
 
-	def queryParam = [
-    	access_token: atomicState.authToken
-    ]
-    
-	def apiGetParams = [
+	query['access_token'] = state.accessToken
+	def params = [
 		uri: getApiUrl(),
 		path: path,
-		query: queryParam
+		'query': query
 	]
-    
-	// log.debug "apiGet(): $apiGetParams"
+	// log.debug "API Get: $params"
 
 	try {
-		httpGet(apiGetParams) { resp ->
-			callback.call(resp)
+		httpGet(params)	{ response ->
+			callback.call(response)
 		}
-	} catch (e) {
-		log.debug "apiGet() failed: $e"
-        // Netatmo API has rate limits so a failure here doesn't necessarily mean our token has expired, but we will check anyways
-        if(now() >= atomicState.tokenExpires) {
-    		atomicState.authToken = null
-			refreshToken()
+	} catch (Exception e) {
+		// This is most likely due to an invalid token. Try to refresh it and try again.
+		log.debug "apiGet: Call failed $e"
+		if(refreshToken()) {
+			log.debug "apiGet: Trying again after refreshing token"
+			httpGet(params)	{ response ->
+				callback.call(response)
+			}
 		}
 	}
 }
@@ -472,12 +481,10 @@ def apiGet(String path, Closure callback) {
 }
 
 def poll() {
-	log.debug "Polling..."
-    
-	getDeviceList()
-    
+	log.debug "In Poll"
+	getDeviceList();
 	def children = getChildDevices()
-    //log.debug "State: ${state.deviceState}"
+    log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
 		def detail = state?.deviceDetail[deviceId]
@@ -533,13 +540,15 @@ def rainToPref(rain) {
 }
 
 def debugEvent(message, displayEvent) {
+
 	def results = [
 		name: "appdebug",
 		descriptionText: message,
 		displayed: displayEvent
 	]
 	log.debug "Generating AppDebug Event: ${results}"
-	sendEvent(results)
+	sendEvent (results)
+
 }
 
 private Boolean canInstallLabs() {
@@ -552,4 +561,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy

@@ -1,11 +1,9 @@
 /**
  * 	Color Coordinator 
- *  Version 1.1.1 - 11/9/16
+ *  Version 1.0.0 - 7/4/15
  *  By Michael Struck
  *
  *  1.0.0 - Initial release
- *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
- *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
  *
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -33,35 +31,27 @@ preferences {
 }
 
 def mainPage() {
-	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves?.id?.find{it==master?.id}
-        if (masterInList) {
-        	section ("**WARNING**"){
-            	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
-            }
-        }
-        section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light", required: true
+	dynamicPage(name: "mainPage", title: "", install: true, uninstall: true) {
+		section("Master Light") {
+			input "master", "capability.colorControl", title: "Colored Light"
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false
 		}
     	section([mobileOnly:true], "Options") {
-			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
+			label(title: "Assign a name", required: false)
 			href "pageAbout", title: "About ${textAppName()}", description: "Tap to get application version, license and instructions"
         }
 	}
 }
 
-page(name: "pageAbout", title: "About ${textAppName()}", uninstall: true) {
+page(name: "pageAbout", title: "About ${textAppName()}") {
 	section {
     	paragraph "${textVersion()}\n${textCopyright()}\n\n${textLicense()}\n"
 	}
 	section("Instructions") {
 		paragraph textHelp()
 	}
-    section("Tap button below to remove application"){
-    }
 }
 
 def installed() {   
@@ -82,61 +72,27 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (slaves && master) {
-		if (!slaves?.id.find{it==master?.id}){
-		if (master?.currentValue("switch") == "on"){
-		    if (randomYes) getRandomColorMaster()
-				else slaves?.on()
-		}
-		else {
-		    slaves?.off()  
-		}
-		}
-	}
+	if (master.currentValue("switch") == "on"){
+    	slaves?.on()
+    }
+    else {
+		slaves?.off()  
+    }
 }
 
 def colorHandler(evt) {
-	if (slaves && master) {
-		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-			log.debug "Changing Slave units H,S,L"
-		def dimLevel = master?.currentValue("level")
-		def hueLevel = master?.currentValue("hue")
-		def saturationLevel = master.currentValue("saturation")
-			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-		slaves?.setColor(newValue)
-		try {
-			log.debug "Changing Slave color temp"
-			def tempLevel = master?.currentValue("colorTemperature")
-			slaves?.setColorTemperature(tempLevel)
-		}
-			catch (e){
-			log.debug "Color temp for master --"
-		}
-		}
-	}
-}
-
-def getRandomColorMaster(){
-    def hueLevel = Math.floor(Math.random() *1000)
-    def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master?.currentValue("level")
+   	def dimLevel = master.currentValue("level")
+    def hueLevel = master.currentValue("hue")
+    def saturationLevel = master.currentValue("saturation")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    log.debug hueLevel
-    log.debug saturationLevel
-    master.setColor(newValue)
-    slaves?.setColor(newValue)   
+    slaves?.setColor(newValue)
 }
 
 def tempHandler(evt){
-	if (slaves && master) {
-	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
-		if (evt.value != "--") {
-		    log.debug "Changing Slave color temp based on Master change"
-		    def tempLevel = master.currentValue("colorTemperature")
-		    slaves?.setColorTemperature(tempLevel)
-		}
-		}
-	}
+    if (evt.value != "--") {
+    	def tempLevel = master.currentValue("colorTemperature")
+    	slaves?.setColorTemperature(tempLevel)
+    }
 }
 
 //Version/Copyright/Information/Help
@@ -146,11 +102,11 @@ private def textAppName() {
 }	
 
 private def textVersion() {
-    def text = "Version 1.1.1 (12/13/2016)"
+    def text = "Version 1.0.0 (07/04/2015)"
 }
 
 private def textCopyright() {
-    def text = "Copyright © 2016 Michael Struck"
+    def text = "Copyright © 2015 Michael Struck"
 }
 
 private def textLicense() {
@@ -172,5 +128,5 @@ private def textHelp() {
 	def text =
     	"This application will allow you to control the settings of multiple colored lights with one control. " +
         "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
-        "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+        "including on/off conditions, hue, saturation, level and color temperature."
+}