MSA-1539: Checks all battery levels daily at a set time and sends a notification if any battery is below the set threshold.

devicetypes/smartthings/my-zigbee-dimmer255.src/my-zigbee-dimmer255.groovy

@@ -1,148 +0,0 @@
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "MY Zigbee Dimmer255", namespace: "smartthings", author: "SmartThings") {
-		capability "Actuator"
-		capability "Switch"
-		capability "Sensor"
-                capability "Switch Level"
-                capability "Refresh"
-
-		fingerprint profileId: "0104", inClusters: "0000,0003,0006,0008", outClusters: "0019"
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-                    state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-	            state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-		}
-                standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-                    state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-                }
-                controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
-	            state "level", action:"switch level.setLevel"
-		}
-                valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		    state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
-		}
-
-		main "switch"
-		details (["switch","refresh","level","levelSliderControl"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	/*if (description?.startsWith("catchall: 0104 000A")) {
-		log.debug "Dropping catchall for SmartPower Outlet"
-		return []
-	}*/
-    log.trace description
-    if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-        if(msg.command == 0x01){
-        	if(msg.clusterId == 0x0006 && msg.data[0] == 0x00 && msg.data[1] == 0x00){
-                def name = "switch" 
-                def value = (msg.data[4] != 0 ? "on" : "off") 
-                log.debug"name:$name,value:$value"
-                def result = createEvent(name: name, value: value)
-                return result
-            }
-        }else if(msg.command == 0x0b && msg.clusterId == 0x0006){
-        	def name = "switch" 
-            def value = (msg.data[0] != 0 ? "on" : "off") 
-            log.debug"name:$name,value:$value"
-            def result = createEvent(name: name, value: value)
-            return result
-        }
-	}else if(description?.startsWith("read attr")){
-    	def descMap = parseDescriptionAsMap(description)
-		log.debug "Read attr: $description"
-    	if(descMap.cluster == "0008" && descMap.attrId == "0000"){
-        	def name = "level" 
-            def value = Integer.parseInt(descMap.value, 16) 
-            value = Math.round(value * 100/255)
-            log.debug"name:$name,value:$value"
-            def result = createEvent(name: name, value: value)
-            return result
-        }
-    }/*else {
-    	log.debug "parse description: $description"
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}*/
-}
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-}
-
-def refresh() {
-	log.debug "refresh()"
-    def cmds = []
-    cmds << "st rattr 0x${device.deviceNetworkId} 1 0x0006 0x0000"
-    cmds << "delay 200"
-    cmds << "st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"
-}
-
-// Commands to device
-def on() {
-	log.debug "on()"
-    def cmds = []
-	cmds << "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-    cmds << "delay 5000"
-    cmds << "st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"
-}
-
-def off() {
-	log.debug "off()"
-    def cmds = []
-	cmds << "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
-    cmds << "delay 5000"
-    cmds << "st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"
-}
-
-def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
-
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		//cmds << "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
-	}
-	else if (device.latestValue("switch") == "off") {
-        sendEvent(name: "switch", value: "on")
-        //cmds << "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-        
-	}
-    //def transitionTime = Math.round(Math.abs(((device.currentValue("level")?:0) as int) - (value as int))*0.3)
-    //def transitionTime2 = hexString(transitionTime>>8)
-    //def transitionTime1 = hexString(transitionTime%256)
-	sendEvent(name: "level", value: value)
-    def level = hexString(Math.round(value * 255/100))
-	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} FFFF}"
-    cmds << "delay 5000"
-    cmds << "st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"
-
-	log.debug cmds
-	cmds
-}

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +21,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -100,38 +96,7 @@ def poll() {
     refresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = refresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
-    configureHealthCheck()
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
 }

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -25,7 +22,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
@@ -100,41 +96,9 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
 def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
+    log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

smartapps/pope/battery-monitor.src/battery-monitor.groovy

@@ -0,0 +1,83 @@
+/**
+ *  Battery Monitor
+ *
+ *  Copyright 2014 Anders Heie
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Battery Monitor",
+    namespace: "Pope",
+    author: "Anders Heie",
+    description: "Monitors all Battery levels and sends a notification if lower than a set threshold.  A Button allows an immediate check. ",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Battery Settings") {
+		input "threshold", "number", title: "Alert when below...", required: true
+        input "batteries", "capability.battery", title: "Which devices?", multiple: true
+        input "theTime", "time", title: "Time to battery check every day"
+	}
+}
+
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unschedule()
+	initialize()
+}
+
+def initialize() {
+
+    //schedule the job
+    // http://docs.smartthings.com/en/latest/smartapp-developers-guide/scheduling.html
+    schedule(theTime, doBatteryCheck)
+
+    //run at install too
+    doBatteryCheck()
+
+}
+
+def doBatteryCheck() {
+    log.debug "doBatteryCheck called at ${new Date()}"
+	
+    def belowLevelCntr = 0
+	def pushMsg = ""
+
+	for (batteryDevice in batteries) {
+    	def batteryLevel = batteryDevice.currentValue("battery")
+		log.debug "${batteryDevice.name} '${batteryDevice.label}' battery: ${batteryLevel}% versus alarm at ${settings.threshold}"
+        if ( batteryLevel <= settings.threshold ) {
+            pushMsg += "${batteryDevice.name} '${batteryDevice.label}' battery: ${batteryLevel}% \n"
+            belowLevelCntr++
+        }
+    }
+
+    if (belowLevelCntr ){
+    	pushMsg = "You have ${belowLevelCntr} devices below the set alarm level ${settings.threshold}% \n" + pushMsg
+
+    } else {
+        pushMsg = "Battery Check App executed with no devices below ${settings.threshold}%"
+    }
+
+    log.debug(pushMsg)
+
+    sendPush(pushMsg)
+}