Merge pull request #1597 from SmartThingsCommunity/staging

Rolling up staging to production
Merge pull request #1596 from SmartThingsCommunity/production
2026-03-09 05:11:52 +00:00 · 2017-01-18 13:27:50 -08:00 · 2017-01-18 13:26:38 -08:00 · 2017-01-12 11:14:01 -08:00 · 2017-01-11 15:59:25 -08:00 · 2017-01-10 16:25:33 -08:00
20 changed files with 598 additions and 100 deletions
--- a/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
+++ b/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
@@ -22,9 +22,10 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"

-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}

 	simulator {
--- a/devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy
+++ b/devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy
@@ -99,7 +99,7 @@ def parse(String description) {

 def poll() {
    def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
    ]

    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -197,7 +197,7 @@ def off() {

 def refresh() {
    def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
    ]

    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
--- a/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
@@ -128,9 +128,9 @@ def setLevel(value) {

 def refresh() {
 	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 500"
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
 	]

 }
@@ -313,9 +313,9 @@ def isDescriptionPower(descMap) {

 def onOffConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }

@@ -323,9 +323,9 @@ def onOffConfig() {
 //min level change is 01
 def levelConfig() {
 	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }

@@ -333,9 +333,10 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }

@@ -344,7 +345,10 @@ def setLevelWithRate(level, rate) {
 		rate = "0000"
 	}
 	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"
+	[
+			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
+			"delay 2000"
+	]
 }

 String convertToHexString(value, width=2) {
--- a/devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy
+++ b/devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy
@@ -51,7 +51,7 @@ def on() {
 			'zcl on-off on',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
+			'delay 2000'

 	]

@@ -62,6 +62,6 @@ def off() {
 			'zcl on-off off',
 			'delay 200',
 			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
+			'delay 2000'
 	]
 }
--- a/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
@@ -157,9 +157,10 @@ def configure() {
 //min change in value is 01
 def powerConfig() {
 	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
 		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
 	]
 }

--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -29,9 +29,10 @@ metadata {
 		command "enrollResponse"


-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}

@@ -285,8 +286,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]

 	return refreshCmds + enrollResponse()
@@ -308,10 +309,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }

--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -298,8 +298,8 @@ def ping() {
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]

 	return refreshCmds + enrollResponse()
@@ -321,10 +321,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }

--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -428,10 +428,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }

--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -252,8 +252,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
 	]

 	return refreshCmds + enrollResponse()
@@ -277,10 +277,10 @@ def enrollResponse() {
 	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]
 }

--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -270,9 +270,9 @@ def configure() {

 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
 	]

 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
--- a/devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy
+++ b/devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy
@@ -86,7 +86,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
 		unschedule("setOffline")
-		def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))

 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
--- a/devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy
+++ b/devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy
@@ -78,7 +78,7 @@ def parse(String description) {
 	def bodyString = msg.body
 	if (bodyString) {
    	unschedule("setOffline")
-		def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
--- a/devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy
+++ b/devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy
@@ -84,7 +84,7 @@ def parse(String description) {
    def bodyString = msg.body
    if (bodyString) {
    	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString)
+        def body = new XmlSlurper().parseText(bodyString.replaceAll("[^\\x20-\\x7e]", ""))
 		if (body?.property?.TimeSyncRequest?.text()) {
        	log.trace "Got TimeSyncRequest"
        	result << timeSyncResponse()
@@ -208,7 +208,7 @@ def subscribe(ip, port) {
    def existingIp = getDataValue("ip")
    def existingPort = getDataValue("port")
    if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"    
+         log.debug "Updating ip from $existingIp to $ip"
    	 updateDataValue("ip", ip)
    	 def ipvalue = convertHexToIP(getDataValue("ip"))
         sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -291,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}
--- a/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
+++ b/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
@@ -28,8 +28,8 @@ metadata {

        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
-        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
+        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
    }

    simulator {}
--- a/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
@@ -24,6 +24,10 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
+		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
+		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
+		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
+		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}

 	simulator {
--- a/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
+++ b/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
@@ -28,6 +28,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}

 	simulator {
--- a/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
@@ -25,6 +25,9 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
+		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
+		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
+		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

 	// simulator metadata
--- a/smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy
+++ b/smartapps/michaelstruck/color-coordinator.src/color-coordinator.groovy
@@ -1,10 +1,11 @@
 /**
 * 	Color Coordinator 
- *  Version 1.1.0 - 11/9/16
+ *  Version 1.1.1 - 11/9/16
 *  By Michael Struck
 *
 *  1.0.0 - Initial release
 *  1.1.0 - Fixed issue where master can be part of slaves. This causes a loop that impacts SmartThings. 
+ *  1.1.1 - Fix NPE being thrown for slave/master inputs being empty.
 *
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
@@ -33,17 +34,17 @@ preferences {

 def mainPage() {
 	dynamicPage(name: "mainPage", title: "", install: true, uninstall: false) {
-		def masterInList = slaves.id.find{it==master.id}
+		def masterInList = slaves?.id?.find{it==master?.id}
        if (masterInList) {
        	section ("**WARNING**"){
            	paragraph "You have included the Master Light in the Slave Group. This will cause a loop in execution. Please remove this device from the Slave Group.", image: "https://raw.githubusercontent.com/MichaelStruck/SmartThingsPublic/master/img/caution.png"
            }
        }
        section("Master Light") {
-			input "master", "capability.colorControl", title: "Colored Light"
+			input "master", "capability.colorControl", title: "Colored Light", required: true
 		}
 		section("Lights that follow the master settings") {
-			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: false, submitOnChange: true
+			input "slaves", "capability.colorControl", title: "Colored Lights",  multiple: true, required: true, submitOnChange: true
 		}
    	section([mobileOnly:true], "Options") {
 			input "randomYes", "bool",title: "When Master Turned On, Randomize Color", defaultValue: false
@@ -81,40 +82,44 @@ def init() {
 }
 //-----------------------------------
 def onOffHandler(evt){
-	if (!slaves.id.find{it==master.id}){
-        if (master.currentValue("switch") == "on"){
-            if (randomYes) getRandomColorMaster()
-			else slaves?.on()
-        }
-        else {
-            slaves?.off()  
-        }
+	if (slaves && master) {
+		if (!slaves?.id.find{it==master?.id}){
+		if (master?.currentValue("switch") == "on"){
+		    if (randomYes) getRandomColorMaster()
+				else slaves?.on()
+		}
+		else {
+		    slaves?.off()  
+		}
+		}
 	}
 }

 def colorHandler(evt) {
-   	if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-		log.debug "Changing Slave units H,S,L"
-    	def dimLevel = master.currentValue("level")
-    	def hueLevel = master.currentValue("hue")
-    	def saturationLevel = master.currentValue("saturation")
-		def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
-    	slaves?.setColor(newValue)
-    	try {
-    		log.debug "Changing Slave color temp"
-        	def tempLevel = master.currentValue("colorTemperature")
-    		slaves?.setColorTemperature(tempLevel)
-    	}
-   		catch (e){
-    		log.debug "Color temp for master --"
-    	}
+	if (slaves && master) {
+		if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+			log.debug "Changing Slave units H,S,L"
+		def dimLevel = master?.currentValue("level")
+		def hueLevel = master?.currentValue("hue")
+		def saturationLevel = master.currentValue("saturation")
+			def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
+		slaves?.setColor(newValue)
+		try {
+			log.debug "Changing Slave color temp"
+			def tempLevel = master?.currentValue("colorTemperature")
+			slaves?.setColorTemperature(tempLevel)
+		}
+			catch (e){
+			log.debug "Color temp for master --"
+		}
+		}
 	}
 }

 def getRandomColorMaster(){
    def hueLevel = Math.floor(Math.random() *1000)
    def saturationLevel = Math.floor(Math.random() * 100)
-    def dimLevel = master.currentValue("level")
+    def dimLevel = master?.currentValue("level")
 	def newValue = [hue: hueLevel, saturation: saturationLevel, level: dimLevel as Integer]
    log.debug hueLevel
    log.debug saturationLevel
@@ -123,12 +128,14 @@ def getRandomColorMaster(){
 }

 def tempHandler(evt){
-    if (!slaves.id.find{it==master.id} && master.currentValue("switch") == "on"){
-        if (evt.value != "--") {
-            log.debug "Changing Slave color temp based on Master change"
-            def tempLevel = master.currentValue("colorTemperature")
-            slaves?.setColorTemperature(tempLevel)
-        }
+	if (slaves && master) {
+	    if (!slaves?.id?.find{it==master?.id} && master?.currentValue("switch") == "on"){
+		if (evt.value != "--") {
+		    log.debug "Changing Slave color temp based on Master change"
+		    def tempLevel = master.currentValue("colorTemperature")
+		    slaves?.setColorTemperature(tempLevel)
+		}
+		}
 	}
 }

@@ -139,7 +146,7 @@ private def textAppName() {
 }	

 private def textVersion() {
-    def text = "Version 1.1.0 (11/09/2016)"
+    def text = "Version 1.1.1 (12/13/2016)"
 }

 private def textCopyright() {
@@ -166,4 +173,4 @@ private def textHelp() {
    	"This application will allow you to control the settings of multiple colored lights with one control. " +
        "Simply choose a master control light, and then choose the lights that will follow the settings of the master, "+
        "including on/off conditions, hue, saturation, level and color temperature. Also includes a random color feature."
-}
+}
--- a/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
+++ b/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
@@ -0,0 +1,461 @@
+/**
+ *  OpenT2T SmartApp Test
+ *
+ *  Copyright 2016 OpenT2T
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+		name: "OpenT2T SmartApp Test",
+		namespace: "opent2t",
+		author: "OpenT2T",
+		description: "Test app to test end to end SmartThings scenarios via OpenT2T",
+		category: "SmartThings Labs",
+		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+		iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+/** --------------------+---------------+-----------------------+------------------------------------
+ *  Device Type         | Attribute Name| Commands              | Attribute Values
+ *  --------------------+---------------+-----------------------+------------------------------------
+ *  switches            | switch        | on, off               | on, off
+ *  motionSensors       | motion        |                       | active, inactive
+ *  contactSensors      | contact       |                       | open, closed
+ *  presenceSensors     | presence      |                       | present, 'not present'
+ *  temperatureSensors  | temperature   |                       | <numeric, F or C according to unit>
+ *  accelerationSensors | acceleration  |                       | active, inactive
+ *  waterSensors        | water         |                       | wet, dry
+ *  lightSensors        | illuminance   |                       | <numeric, lux>
+ *  humiditySensors     | humidity      |                       | <numeric, percent>
+ *  locks               | lock          | lock, unlock          | locked, unlocked
+ *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
+ *  cameras             | image         | take                  | <String>
+ *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
+ * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
+ *                      |				| emergencyHeat,        |
+ *                      |				| setThermostatMode,    |
+ *                      |				| fanOn, fanAuto,       |
+ *                      |				| fanCirculate,         |
+ *                      |				| setThermostatFanMode  |
+ *  --------------------+---------------+-----------------------+------------------------------------
+ */
+
+//Device Inputs
+preferences {
+	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
+		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
+		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
+		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
+		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false
+		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false
+	}
+}
+
+def getInputs() {
+	def inputList = []
+	inputList += contactSensors ?: []
+	inputList += garageDoors ?: []
+	inputList += locks ?: []
+	inputList += cameras ?: []
+	inputList += motionSensors ?: []
+	inputList += presenceSensors ?: []
+	inputList += switches ?: []
+	inputList += thermostats ?: []
+	inputList += waterSensors ?: []
+	return inputList
+}
+
+//API external Endpoints
+mappings {
+	path("/subscriptionURL/:url") {
+		action:
+		[
+				PUT: "updateEndpointURL"
+		]
+	}
+	path("/connectionId/:connId") {
+		action:
+		[
+				PUT: "updateConnectionId"
+		]
+	}
+	path("/devices") {
+		action:
+		[
+				GET: "getDevices"
+		]
+	}
+	path("/devices/:id") {
+		action:
+		[
+				GET: "getDevice"
+		]
+	}
+	path("/update/:id") {
+		action:
+		[
+				PUT: "updateDevice"
+		]
+	}
+	path("/subscription/:id") {
+		action:
+		[
+				POST  : "registerDeviceChange",
+				DELETE: "unregisterDeviceChange"
+		]
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	registerSubscriptions()
+}
+
+def initialize() {
+	state.connectionId = ""
+	state.endpointURL = "https://ifs.windows-int.com/v1/cb/81C7E77B-EABC-488A-B2BF-FEC42F0DABD2/notify"
+	registerSubscriptions()
+}
+
+//Subscribe events for all devices
+def registerSubscriptions() {
+	registerChangeHandler(inputs)
+}
+
+//Subscribe to events from a list of devices
+def registerChangeHandler(myList) {
+	myList.each { myDevice ->
+		def theAtts = myDevice.supportedAttributes
+		theAtts.each { att ->
+			subscribe(myDevice, att.name, eventHandler)
+			log.info "Registering ${myDevice.displayName}.${att.name}"
+		}
+	}
+}
+
+//Endpoints function: Subscribe to events from a specific device
+def registerDeviceChange() {
+	def myDevice = findDevice(params.id)
+	def theAtts = myDevice.supportedAttributes
+	try {
+		theAtts.each { att ->
+			subscribe(myDevice, att.name, eventHandler)
+			log.info "Registering ${myDevice.displayName}.${att.name}"
+		}
+		return ["succeed"]
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceChange() {
+	def myDevice = findDevice(params.id)
+	try {
+		unsubscribe(myDevice)
+		log.info "Unregistering ${myDevice.displayName}"
+		return ["succeed"]
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+}
+
+//When events are triggered, send HTTP post to web socket servers
+def eventHandler(evt) {
+	def evt_device_id = evt.deviceId
+	def evt_device_value = evt.value
+	def evt_name = evt.name
+	def evt_device = evt.device
+	def evt_deviceType = getDeviceType(evt_device);
+	def params = [
+			uri : "${state.endpointURL}/${state.connectionId}",
+			body: [
+					name        : evt_device.displayName,
+					id          : evt_device.id,
+					deviceType  : evt_deviceType,
+					manufacturer: evt_device.getManufacturerName(),
+					model       : evt_device.getModelName(),
+					attributes  : deviceAttributeList(evt_device)
+			]
+	]
+	try {
+		log.trace "POST URI: ${params.uri}"
+		log.trace "Payload: ${params.body}"
+		httpPostJson(params) { resp ->
+			resp.headers.each {
+				log.debug "${it.name} : ${it.value}"
+			}
+			log.trace "response status code: ${resp.status}"
+			log.trace "response data: ${resp.data}"
+		}
+	} catch (e) {
+		log.debug "something went wrong: $e"
+	}
+}
+
+//Endpoints function: update subcription endpoint url [state.endpoint]
+void updateEndpointURL() {
+	state.endpointURL = params.url
+	log.info "Updated EndpointURL to ${state.endpointURL}"
+}
+
+//Endpoints function: update global variable [state.connectionId]
+void updateConnectionId() {
+	def connId = params.connId
+	state.connectionId = connId
+	log.info "Updated ConnectionID to ${state.connectionId}"
+}
+
+//Endpoints function: return all device data in json format
+def getDevices() {
+	def deviceData = []
+	inputs?.each {
+		def deviceType = getDeviceType(it)
+		if (deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+		}
+	}
+
+	log.debug "getDevices, return: ${deviceData}"
+	return deviceData
+}
+
+//Endpoints function: get device data
+def getDevice() {
+	def it = findDevice(params.id)
+	def deviceType = getDeviceType(it)
+	def device
+	if (deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+	}
+	log.debug "getDevice, return: ${device}"
+	return device
+}
+
+//Endpoints function: update device data
+void updateDevice() {
+	def device = findDevice(params.id)
+	request.JSON.each {
+		def command = it.key
+		def value = it.value
+		if (command) {
+			def commandList = mapDeviceCommands(command, value)
+			command = commandList[0]
+			value = commandList[1]
+
+			if (command == "setAwayMode") {
+				log.info "Setting away mode to ${value}"
+				if (location.modes?.find { it.name == value }) {
+					location.setMode(value)
+				}
+			} else if (command == "thermostatSetpoint") {
+				switch (device.currentThermostatMode) {
+					case "cool":
+						log.info "Update: ${device.displayName}, [${command}, ${value}]"
+						device.setCoolingSetpoint(value)
+						break
+					case "heat":
+					case "emergency heat":
+						log.info "Update: ${device.displayName}, [${command}, ${value}]"
+						device.setHeatingSetpoint(value)
+						break
+					default:
+						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
+						break
+				}
+			} else if (!device) {
+				log.error "updateDevice, Device not found"
+				httpError(404, "Device not found")
+			} else if (!device.hasCommand(command)) {
+				log.error "updateDevice, Device does not have the command"
+				httpError(404, "Device does not have such command")
+			} else {
+				if (command == "setColor") {
+					log.info "Update: ${device.displayName}, [${command}, ${value}]"
+					device."$command"(hex: value)
+				} else if (value.isNumber()) {
+					def intValue = value as Integer
+					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
+					device."$command"(intValue)
+				} else if (value) {
+					log.info "Update: ${device.displayName}, [${command}, ${value}]"
+					device."$command"(value)
+				} else {
+					log.info "Update: ${device.displayName}, [${command}]"
+					device."$command"()
+				}
+			}
+		}
+	}
+}
+
+/*** Private Functions ***/
+
+//Return current location mode info
+private getLocationModeInfo() {
+	return [mode: location.mode, supported: location.modes.name]
+}
+
+//Map each device to a type given it's capabilities
+private getDeviceType(device) {
+	def deviceType
+	def caps = device.capabilities
+	log.debug "capabilities: [${device}, ${caps}]"
+	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
+	caps.each {
+		switch (it.name.toLowerCase()) {
+			case "switch":
+				deviceType = "switch"
+				break
+			case "switch level":
+				deviceType = "light"
+				break
+			case "contact sensor":
+				deviceType = "contactSensor"
+				break
+			case "garageDoorControl":
+				deviceType = "garageDoor"
+				break
+			case "lock":
+				deviceType = "lock"
+				break
+			case "video camera":
+				deviceType = "camera"
+				break
+			case "motion sensor":
+				deviceType = "motionSensor"
+				break
+			case "presence sensor":
+				deviceType = "presenceSensor"
+				break
+			case "thermostat":
+				deviceType = "thermostat"
+				break
+			case "water sensor":
+				deviceType = "waterSensor"
+				break
+			default:
+				break
+		}
+	}
+	return deviceType
+}
+
+//Return a specific device give the device ID.
+private findDevice(deviceId) {
+	return inputs?.find { it.id == deviceId }
+}
+
+//Return a list of device attributes
+private deviceAttributeList(device) {
+	device.supportedAttributes.collectEntries { attribute ->
+		try {
+			[(attribute.name): device.currentValue(attribute.name)]
+		} catch (e) {
+			[(attribute.name): null]
+		}
+	}
+}
+
+//Map device command and value.
+//input command and value are from UWP,
+//returns resultCommand and resultValue that corresponds with function and value in SmartApps
+private mapDeviceCommands(command, value) {
+	log.debug "mapDeviceCommands: [${command}, ${value}]"
+	def resultCommand = command
+	def resultValue = value
+	switch (command) {
+		case "switch":
+			if (value == 1 || value == "1" || value == "on") {
+				resultCommand = "on"
+				resultValue = ""
+			} else if (value == 0 || value == "0" || value == "off") {
+				resultCommand = "off"
+				resultValue = ""
+			}
+			break
+	// light attributes
+		case "level":
+			resultCommand = "setLevel"
+			resultValue = value
+			break
+		case "hue":
+			resultCommand = "setHue"
+			resultValue = value
+			break
+		case "saturation":
+			resultCommand = "setSaturation"
+			resultValue = value
+			break
+		case "ct":
+			resultCommand = "setColorTemperature"
+			resultValue = value
+			break
+		case "color":
+			resultCommand = "setColor"
+			resultValue = value
+	// thermostat attributes
+		case "hvacMode":
+			resultCommand = "setThermostatMode"
+			resultValue = value
+			break
+		case "fanMode":
+			resultCommand = "setThermostatFanMode"
+			resultValue = value
+			break
+		case "awayMode":
+			resultCommand = "setAwayMode"
+			resultValue = value
+			break
+		case "coolingSetpoint":
+			resultCommand = "setCoolingSetpoint"
+			resultValue = value
+			break
+		case "heatingSetpoint":
+			resultCommand = "setHeatingSetpoint"
+			resultValue = value
+			break
+		case "thermostatSetpoint":
+			resultCommand = "thermostatSetpoint"
+			resultValue = value
+			break
+	// lock attributes
+		case "locked":
+			if (value == 1 || value == "1" || value == "lock") {
+				resultCommand = "lock"
+				resultValue = ""
+			} else if (value == 0 || value == "0" || value == "unlock") {
+				resultCommand = "unlock"
+				resultValue = ""
+			}
+			break
+		default:
+			break
+	}
+
+	return [resultCommand, resultValue]
+}
+
--- a/smartapps/smartthings/hue-connect.src/hue-connect.groovy
+++ b/smartapps/smartthings/hue-connect.src/hue-connect.groovy
@@ -172,18 +172,34 @@ def bulbDiscovery() {
 			if (existingLightsDescription.isEmpty()) {
 				existingLightsDescription += it.value
 			} else {
-				 existingLightsDescription += ", ${it.value}"
+				existingLightsDescription += ", ${it.value}"
 			}
 		}
 	}

-	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
-			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
+	if (bulbRefreshCount > 200 && numFound == 0) {
+		// Time out to avoid endless discovery
+		state.inBulbDiscovery = false
+		bulbRefreshCount = 0
+		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
+			section("Failed to discover any lights, please try again later. Click Done to exit.") {
+				//input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
+				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
+			}
+			section {
+				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
+			}
 		}
-		section {
-			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
+
+	} else {
+		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+			section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+				input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
+				paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
+			}
+			section {
+				href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
+			}
 		}
 	}
 }
@@ -407,7 +423,7 @@ def addBridge() {
 	if(vbridge) {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
-	 		// compatibility with old devices
+			// compatibility with old devices
 			def newbridge = true
 			childDevices.each {
 				if (it.getDeviceDataByName("mac")) {
@@ -593,7 +609,7 @@ def locationHandler(evt) {
 	log.trace "Location: $description"

 	def hub = evt?.hubId
- 	def parsedEvent = parseLanMessage(description)
+	def parsedEvent = parseLanMessage(description)
 	parsedEvent << ["hub":hub]

 	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:basic:1")) {
@@ -819,8 +835,7 @@ def parse(childDevice, description) {
 			try {
 				body = new groovy.json.JsonSlurper().parseText(bodyString)
 			} catch (all) {
-				log.warn "Parsing Body failed - trying again..."
-				poll()
+				log.warn "Parsing Body failed"
 			}
 			if (body instanceof java.util.Map) {
 				// get (poll) reponse
@@ -844,7 +859,7 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {

 	def events = [:]
 	// For now, only care about changing color temperature if requested by user
-	if (ct != null && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
+	if (ct != null && ct != 0 && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
 		// for some reason setting Hue to their specified minimum off 153 yields 154, dealt with below
 		// 153 (6500K) to 500 (2000K)
 		def temp = (ct == 154) ? 6500 : Math.round(1000000 / ct)
@@ -1252,7 +1267,7 @@ private getBridgeIP() {
 		if (d) {
 			if (d.getDeviceDataByName("networkAddress"))
 				host =  d.getDeviceDataByName("networkAddress")
-		else
+			else
 				host = d.latestState('networkAddress').stringValue
 		}
 		if (host == null || host == "") {
Author	SHA1	Message	Date
Vinay Rao	30511d74af	Merge pull request #1597 from SmartThingsCommunity/staging Rolling up staging to production	2017-01-18 13:27:50 -08:00
Vinay Rao	f0f02a2c00	Merge pull request #1596 from SmartThingsCommunity/production Rolling down production to staging	2017-01-18 13:26:38 -08:00
Vinay Rao	57d20e2fca	Merge pull request #1575 from larsfinander/DVCSMP-2298_Philips_Hue_Reduce_daily_exceptions_staging DVCSMP-2298 Philips Hue: Reduce number of daily exceptions	2017-01-12 11:14:01 -08:00
Vinay Rao	3216f63cc0	Merge pull request #1581 from larsfinander/MSA-1577_OpenT2T_staging MSA-1577: OpenT2T	2017-01-11 15:59:25 -08:00
Vinay Rao	7cbc2d1780	Merge pull request #1585 from SmartThingsCommunity/master Rolling up master to staging	2017-01-10 16:25:33 -08:00
Vinay Rao	5ad20fbd2a	Merge pull request #1584 from SmartThingsCommunity/staging Rolling down staging hotfix to master	2017-01-10 16:08:36 -08:00
Vinay Rao	a17971d68c	Merge pull request #1583 from SmartThingsCommunity/staging Rolling up staging to production for deploy	2017-01-10 15:01:44 -08:00
Vinay Rao	076ffecd19	Merge pull request #1582 from SmartThingsCommunity/production Rolling down production hotfix to staging	2017-01-10 15:00:27 -08:00
Duncan McKee	52357e4c50	Merge pull request #1580 from SmartThingsCommunity/DEVC-533 Add fingerprint for GE Smart Motion Sensor DEVC-533	2017-01-10 16:40:43 -05:00
Lars Finander	03a7991279	MSA-1577: OpenT2T This SmartApp enables the end-to-end SmartThings scenarios via OpenT2T. More information on OpenT2T can be found at http://www.opentranslatorstothings.org/#/	2017-01-10 12:32:49 -07:00
Duncan McKee	f969027191	Add fingerprint for GE Smart Motion Sensor DEVC-533	2017-01-10 12:55:13 -05:00
Vinay Rao	8db0556696	Merge pull request #1562 from varzac/increase-delays DPROT-223 Increase zigbee message delays	2017-01-10 09:35:46 -08:00
Juan Pablo Risso	5607a3e346	DVCSMP-2309 - Wemo Exceptions (#1579 )	2017-01-10 12:29:53 -05:00
Lars Finander	bd44027038	DVCSMP-2298 Philips Hue: Reduce number of daily exceptions -Stop retry when broken data received -Time out on light discovery if nothing is found -Avoid div/0 in color temp logic	2017-01-09 15:32:01 -07:00
Vinay Rao	490ec329cb	Merge pull request #1570 from workingmonk/feature/iris_button DEVC-520 DEVC-525 Adding Iris Button after clearing certification	2017-01-06 09:34:49 -08:00
Vinay Rao	3109049122	Merge pull request #1569 from workingmonk/feature/certification_work DEVC-518 Iris Smart Water Sensor	2017-01-06 09:34:25 -08:00
Zach Varberg	930c4ed914	Increase zigbee message delays This changes our smartsense DTHs that don't use the ZigBee library for everything to have larger delays between ZigBee messages. This is to reduce the network load to try to work around some of the poorer behaving ZigBee routers we support. This resolves: https://smartthings.atlassian.net/browse/DPROT-223	2017-01-06 10:45:13 -06:00
Vinay Rao	259516f21f	DEVC-520 DEVC-525 Adding Iris Button after clearing certification	2017-01-05 16:54:46 -08:00
Vinay Rao	b7a08a88e0	DEVC-518 Iris Smart Water Sensor	2017-01-05 16:41:50 -08:00
Jack Chi	c028515fcd	Merge pull request #1546 from skt123/dimmer_switch [CHF-487] Health Check for Z-Wave Dimmer Switch	2016-12-29 10:29:43 -08:00
Jack Chi	751c98d123	Merge pull request #1550 from parijatdas/enerwave [CHF-488] [CHF-489] [CHF-490] Implementation of HealthCheck for Enerwave Duplex Receptacle ZW15R, Enerwave On/Off Switch ZW15S and Leviton 15A Switch VRS15-1LZ	2016-12-29 10:27:18 -08:00
Jack Chi	5b874e8f3a	Merge pull request #1545 from pchomal/dimmerswitch_generic [CHF-477] Health Check for Z-Wave Dimmer Switch Generic	2016-12-27 11:36:51 -08:00
Parijat Das	9e10405527	Added fingerprints for the following devices: 1. Enerwave Duplex Receptacle ZW15R 2. Enerwave On/Off Switch ZW15S 3. Leviton 15A Switch VRS15-1LZ	2016-12-20 18:33:50 +05:30
sushant.k1	32ceaff54d	[CHF-487] Added Health Check Implementation for: 1. 1,000-Watt In-Wall Smart Dimmer Switch (GE 12725) 2. In-Wall Smart Fan Control (GE 12730)	2016-12-20 12:08:16 +05:30
piyush.c	5b1da30a47	[CHF-477] Health Check implementation for Z-Wave Dimmer Switch Generic with checkinterval of 32min	2016-12-20 10:39:08 +05:30
bflorian	76e139153a	Merge pull request #1532 from tslagle13/fix-color-coordinator-NPE [DVCSMP-2273] Fix for NPE for slave/master settings	2016-12-15 17:11:01 -05:00
tslagle13	a4bc248006	One further fix for NPEs	2016-12-14 11:40:02 -08:00
tslagle13	e7eb461b4e	[DVCSMP-2273] Fix for NPE for slave/master settings	2016-12-13 14:37:49 -08:00
Vinay Rao	083ed7cc9a	Merge pull request #1518 from SmartThingsCommunity/staging Rolling up staging to prod for deploy	2016-12-07 12:41:33 -08:00