Revert "DVCSMP-2179 added device watch for ecobee based on the code from lyric"

2026-04-05 22:04:50 +01:00 · 2016-11-14 11:49:30 -08:00
26 changed files with 144 additions and 376 deletions
--- a/devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy
+++ b/devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy
@@ -120,15 +120,6 @@ def configure() {
 	return cmd
 }

-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }
--- a/devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy
+++ b/devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy
@@ -109,15 +109,6 @@ def configure() {
 	return cmds
 }

-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }
--- a/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
+++ b/devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy
@@ -27,7 +27,7 @@ metadata {
        capability "Switch"
        capability "Refresh"
        capability "Music Player"
-        capability "Health Check"
+        capability "Polling"

        /**
         * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
 * @return action(s) to take or null
 */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
+    onAction("refresh")
 }

 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
    return actions
 }

+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
 * Joins this speaker into the everywhere zone
 */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
    return boseGET("/now_playing")
 }

-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
 * Requests the list of presets
 *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
 */
 def getDeviceIP() {
    return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }
--- a/devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy
+++ b/devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy
@@ -183,15 +183,6 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }

-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }
--- a/devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy
+++ b/devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy
@@ -23,7 +23,6 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
-		capability "Health Check"

 		command "generateEvent"
 		command "raiseSetpoint"
@@ -39,7 +38,6 @@ metadata {
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
 		attribute "deviceTemperatureUnit", "string"
-		attribute "deviceAlive", "enum", ["true", "false"]
 	}

 	tiles {
@@ -122,21 +120,6 @@ metadata {

 }

-void installed() {
-    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
-    // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
-}
-
-// Device Watch will ping the device to proactively determine if the device has gone offline
-// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
-def ping() {
-    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
-    if (isAlive) {
-        refresh()
-    }
-}
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -181,11 +164,7 @@ def generateEvent(Map results) {
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
-				event['displayed'] = false
-			} else {
+			}  else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
--- a/devicetypes/smartthings/life360-user.src/life360-user.groovy
+++ b/devicetypes/smartthings/life360-user.src/life360-user.groovy
@@ -39,7 +39,7 @@ metadata {
 }

 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)
--- a/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
@@ -71,7 +71,7 @@ def parse(String description) {

 	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult) {
+	if (finalResult != "false") {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
@@ -212,16 +212,13 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
-		else {
-			return [:]
-		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }

@@ -255,7 +252,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}

 }
@@ -282,9 +279,10 @@ def isDescriptionLevel(descMap) {

 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
+
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }

@@ -306,7 +304,7 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }

--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
+++ b/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
@@ -57,7 +57,6 @@ def parse(String description) {

 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -65,7 +64,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)

-		results = [
+		def results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -74,6 +73,8 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
+	} else {
+		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }

 private getAccelerationResult(numValue) {
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
--- a/devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy
+++ b/devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy
@@ -126,15 +126,6 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }

-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }
--- a/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
@@ -23,11 +23,9 @@ metadata {


        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
    }

    tiles(scale: 2) {
--- a/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"

-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}

 	// UI tile definitions
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
@@ -32,12 +32,11 @@ metadata {
        attribute "colorName", "string"
        command "setGenericName"

-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
    }

    // UI tile definitions
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
@@ -32,12 +32,11 @@ metadata {

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
    }

    // UI tile definitions
@@ -84,24 +83,105 @@ def parse(String description) {
        }
    }
    else {
-        def cluster = zigbee.parse(description)
+        Map bindingTable = parseBindingTableResponse(description)
+        if (bindingTable) {
+            List<String> cmds = []
+            bindingTable.table_entries.inject(cmds) { acc, entry ->
+                // The binding entry is not for our hub and should be deleted
+                if (entry["dstAddr"] != zigbeeEui) {
+                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
+                }
+                acc
+            }
+            // There are more entries that we haven't examined yet
+            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
+                def startPos
+                if (cmds) {
+                    log.warn "Removing binding entries for other devices: $cmds"
+                    // Since we are removing some entries, we should start in the same spot as we just read since values
+                    // will fill in the newly vacated spots
+                    startPos = bindingTable.startIndex
+                } else {
+                    // Since we aren't removing anything we move forward to the next set of table entries
+                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
+                }
+                cmds.addAll(requestBindingTable(startPos))
+            }
+            sendHubCommand(cmds.collect { it ->
+                new physicalgraph.device.HubAction(it)
+            }, 2000)
+        } else {
+            def cluster = zigbee.parse(description)

-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+                if (cluster.data[0] == 0x00) {
+                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                }
+                else {
+                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                }
            }
            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                log.warn "DID NOT PARSE MESSAGE for description : $description"
+                log.debug "${cluster}"
            }
        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
    }
 }

+def parseBindingTableResponse(description) {
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap["clusterInt"] == 0x8033) {
+        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
+        def field_values = [:]
+        def data = descMap["data"]
+        header_field_lengths.each { k, v ->
+            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
+            data = data.drop(v);
+        }
+
+        List<Map> table = []
+        if (field_values.numEntriesReturned) {
+            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
+            for (def i : 0..(field_values.numEntriesReturned - 1)) {
+                def entryMap = [:]
+                table_entry_lengths.each { k, v ->
+                    def val = data.take(v).reverse().join("")
+                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
+                    data = data.drop(v)
+                }
+
+                switch (entryMap.dstAddrMode) {
+                    case 0x01:
+                        entryMap["dstAddr"] = data.take(2).reverse().join("")
+                        data = data.drop(2)
+                        break
+                    case 0x03:
+                        entryMap["dstAddr"] = data.take(8).reverse().join("")
+                        data = data.drop(8)
+                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
+                        data = data.drop(1)
+                        break
+                }
+                table << entryMap
+            }
+        }
+        field_values["table_entries"] = table
+        return field_values
+    }
+    return [:]
+}
+
+def requestBindingTable(startPos=0) {
+    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
+}
+
+def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
+    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
+}
+
+
 def off() {
    zigbee.off()
 }
@@ -131,8 +211,7 @@ def configure() {
    // enrolls with default periodic reporting until newer 5 min interval is confirmed
    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    refresh() + requestBindingTable(0) + ["delay 2000"]
 }

 def setColorTemperature(value) {
--- a/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
+++ b/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
@@ -127,8 +127,8 @@ def configureHealthCheck() {

 def configure() {
    log.debug "configure()"
-    configureHealthCheck()
    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }

 def updated() {
--- a/devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy
@@ -27,10 +27,6 @@ metadata {
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
    }

    // UI tile definitions
--- a/devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy
@@ -32,7 +32,6 @@ metadata {

        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
    }

    // UI tile definitions
--- a/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
@@ -24,10 +24,6 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}

 	simulator {
--- a/smartapps/herna202/smart-im-home.src/smart-im-home.groovy
+++ b/smartapps/herna202/smart-im-home.src/smart-im-home.groovy
@@ -1,212 +0,0 @@
-/**
- *  Smart Im Home
- *
- *  Copyright 2016 Fernando Hernandez
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Smart Im Home",
-    namespace: "Herna202",
-    author: "Fernando Hernandez",
-    description: "Only turn on the light after sunset when you are the first to come home",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png") {
-}
-
-
-preferences 
-{
-	section("When I arrive and leave...")
-    {
-		input "presence1", "capability.presenceSensor", title: "Who?",required: true, multiple: true
-	}
-	section("Turn on/off a light...")
-    {
-		input "switch1", "capability.switchLevel",required: true, multiple: true
-	}
-    section("Light Level") 
-    {
-    	input "LightLevel", "number", required: true, title: "How Bright?"
-    }
-    section("Change to this mode when you leave (defaults to Away)") 
-    {
-        input "leaveMode", "mode", required: false ,title: "Mode?"
-    }
-    section("Change to this mode when you return (defaults to Home)") 
-    {
-        input "returnMode", "mode", required: false, title: "Mode?"
-    }
-    section("False alarm threshold (defaults to 2 min)") 
-    {
-        input "falseAlarmThreshold", "decimal", title: "Number of minutes", required: false
-    }
-    section( "Notifications" ) 
-    {
-        input("recipients", "contact", title: "Send notifications to", required: false) 
-        {
-            input "sendPushMessage", "enum", title: "Send a push notification?", options: ["Yes", "No"], required: false
-            input "phone", "phone", title: "Send a Text Message?", required: false
-        }
-    }
-}
-
-def installed()
-{
-    state.howManyPeopleAreHome = isAnyoneHome()
-	subscribe(presence1, "presence", presenceHandler)
-}
-
-def updated()
-{
-	unsubscribe()
-	subscribe(presence1, "presence", presenceHandler)
-}
-
-private findFalseAlarmThreshold() 
-{
-    (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold : 2
-}
-
-private findReturnMode() 
-{
-    (returnMode != null && returnMode != "") ? returnMode : "Home"
-}
-
-private findLeaveMode() 
-{
-    (leaveMode != null && leaveMode != "") ? leaveMode : "Away"
-}
-
-private isAnyoneHome()
-{
-    def result = 0
-    for (person in presence1) 
-    {
-        if (person.currentPresence == "present") 
-        {
-            result++
-        }
-    }
-    return result
-}
-
-def checkIfEveryoneIsActuallyGone() {
-    if (isAnyoneHome() == 0) {
-        def threshold = 1000 * 60 * falseAlarmThreshold - 1000
-        def awayLongEnough = presence1.findAll { person ->
-            def presenceState = presence1.currentState("presence")
-            def elapsed = now() - presenceState.rawDateCreated.time
-            elapsed >= threshold
-        }
-        log.debug "Found ${awayLongEnough.size()} out of ${presence1.size()} person(s) who were away long enough"
-        if (awayLongEnough.size() == presence1.size()) {
-            //def message = "${app.label} changed your mode to '${newMode}' because everyone left home"
-            def message = "SmartThings changed your mode to '${findLeaveMode()}' because everyone left home"
-            log.info message
-            send(message)
-            switch1.setLevel(0)
-            state.howManyPeopleAreHome = 0
-            log.warn "Everyone's away."
-            changeMode(findLeaveMode())
-            runIn(30, "VerifyAway", [overwrite: false])
-        } else {
-            log.debug "not everyone has been away long enough; doing nothing"
-        }
-    } else {
-        log.debug "not everyone is away; doing nothing"
-    }
-}
-
-private send(msg) {
-    if ( sendPushMessage != "No" ) {
-        log.debug( "sending push message" )
-        sendPush( msg )
-    }
-
-    if ( phone ) {
-        log.debug( "sending text message" )
-        sendSms( phone, msg )
-    }
-
-    log.debug msg
-}
-
-def changeMode(newMode) 
-{
-    log.warn "changeMode, location.mode = $location.mode, newMode = $newMode, location.modes = $location.modes"
-
-    if (location.mode != newMode) {
-        if (location.modes?.find{it.name == newMode}) {
-            setLocationMode(newMode)
-            log.warn "changeMode, location.mode = $location.mode, newMode = $newMode, location.modes = $location.modes"
-        }  else {
-            log.warn "Tried to change to undefined mode '${newMode}'"
-        }
-    }
-}
-
-def VerifyHome() 
-{
-	log.warn "VerifyHome, location.mode = $location.mode"
-}
-
-def VerifyAway() 
-{
-	log.warn "VerifyAway, location.mode = $location.mode"
-}
-
-def presenceHandler(evt)
-{
-	def now = new Date()
-	def sunTime = getSunriseAndSunset()
-    def tempHowManyPoepleAreHome = isAnyoneHome()
-    
-	log.debug "nowTime: $now"
-	log.debug "riseTime: $sunTime.sunrise"
-	log.debug "setTime: $sunTime.sunset"
-	log.debug "presenceHandler $evt.name: $evt.value"
-	log.debug "The current mode ID is: ${location.currentMode}"
-
-    if(tempHowManyPoepleAreHome == 0)
-    {
-        log.info "starting debounce sequence"
-        runIn(findFalseAlarmThreshold() * 60, "checkIfEveryoneIsActuallyGone", [overwrite: false])
-    }
-	else if(state.howManyPeopleAreHome)
-    {
-    	log.warn "Someone is already Home, no need to take action"
-    }
-    else
-    {
-        log.warn "First person to arrive, need to take action"
-    	state.howManyPeopleAreHome = tempHowManyPoepleAreHome
-        log.debug "How many people are home after update $state.howManyPeopleAreHome"
-        def message = "SmartThings changed your mode to '${findReturnMode()}' because everyone came home"
-        log.info message
-        send(message)
-        changeMode(findReturnMode())
-        runIn(30, "VerifyHome", [overwrite: false])
-        if(state.howManyPeopleAreHome && (now > sunTime.sunset)) 
-        {
-            switch1.setLevel(LightLevel)
-            log.warn "Welcome home at night!"
-        }
-        else if(state.howManyPeopleAreHome && (now < sunTime.sunset)) 
-        {
-            log.warn "Welcome home at daytime!"
-        }
-    }
-}
-
-
--- a/smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy
+++ b/smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy
@@ -19,9 +19,9 @@
    author: "SmartThings",
    description: "Control your Bose SoundTouch speakers",
    category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
    singleInstance: true
 )

@@ -104,7 +104,7 @@ def deviceDiscovery()

        return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
            section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
            }
        }
    }
@@ -196,8 +196,6 @@ def addDevice(){
            d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
            d.boseSetDeviceID(newDevice.value.deviceID)
            log.trace "Created ${d.displayName} with id $dni"
-            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
-            d.refresh()
        } else {
            log.trace "${d.displayName} with id $dni already exists"
        }
--- a/smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy
+++ b/smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy
@@ -842,7 +842,6 @@ private void storeThermostatData(thermostats) {
            minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
            maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
            autoMode: stat.settings.autoHeatCoolFeatureEnabled,
-            deviceAlive: stat.runtime.connected == true ? "true" : "false",
            auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
            temperature: (stat.runtime.actualTemperature / 10),
            heatingSetpoint: stat.runtime.desiredHeat / 10,
--- a/smartapps/smartthings/life360-connect.src/life360-connect.groovy
+++ b/smartapps/smartthings/life360-connect.src/life360-connect.groovy
@@ -289,12 +289,12 @@ def initializeLife360Connection() {
       		state.life360AccessToken = result.data.access_token
            return true;
   		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
        return false;
        
    }
    catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
       return false;
    }

@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
    
    try { // we are going to just ignore any errors
    
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
        
        def place = state.places.find{it.id==settings.place}
        
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
        	// log.debug "Distance Away = ${distanceAway}"
  
  			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                
        	// log.debug "External Id=${app.id}:${member.id}"
        
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {

 def placeEventHandler() {

-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."

 	// the POST to this end-point will look like:
    // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
    def direction = params?.direction
    def timestamp = params?.timestamp
    
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
    if (placeId == settings.place) {

 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {

 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
   		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
    	}
    }