Modifying 'Reminder to Close Windows after leaving house (via presence sensor)'

devicetypes/danlwelch/zooz-4-in-1.src/zooz-4-in-1.groovy

@@ -1,68 +0,0 @@
-/**
- *  Zooz 4-in-1
- *
- *  Copyright 2017 Dan Welch
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Zooz 4-in-1", namespace: "Danlwelch", author: "Dan Welch") {
-		capability "Illuminance Measurement"
-		capability "Light"
-		capability "Light"
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-
-		attribute "Humidity", "string"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'illuminance' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'motion' attribute
-	// TODO: handle 'temperature' attribute
-	// TODO: handle 'Humidity' attribute
-
-}
-
-// handle commands
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -58,7 +58,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"
 
 		attribute "networkAddress", "string"
@@ -46,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -67,7 +67,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -51,7 +51,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -56,7 +56,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -80,8 +79,7 @@ def parse(String description) {
 		*/
 		event.value = event.value / 10
 	}
-
+	return event
-	return event ? createEvent(event) : event
 }
 
 def setLevel(value) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -83,8 +83,9 @@ def parse(String description) {
 
 	if (event) {
 		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
+			event.value = event.value / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			event.descriptionText = '{{ device.displayName }} power is {{ value }} Watts'
+			event.translatable = true
 		} else if (event.name == "switch") {
 			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
@@ -105,7 +106,7 @@ def parse(String description) {
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }
 
 def off() {

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -113,14 +113,6 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
-def installed() {
-    if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
-        if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
-            sendEvent(name: "level", value: 100)
-        }
-    }
-}
-
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,12 +6,6 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -47,8 +41,3 @@ Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
 * [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -29,8 +28,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -27,8 +26,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/curb-v2/curb-control.src/curb-control.groovy

@@ -1,103 +0,0 @@
-/**
- *  Curb Control
- *
- *  Copyright 2016 Savanni D'Gerinel
- *
- */
-definition(
-    name: "Curb Control",
-    namespace: "curb-v2",
-    author: "Savanni D'Gerinel",
-    description: "Control point for Curb/SmartThings integration",
-    category: "Green Living",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Allow Endpoint to Control These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-	}
-}
-
-mappings {
-
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-	path("/switches/:id/:command") {
-		action: [
-			PUT: "updateSwitch"
-		]
-	}
-}
-
-def installed() {}
-
-def updated() {}
-
-
-//switches
-def listSwitches() {
-	switches.collect{device(it,"switch")}
-}
-
-def showSwitch() {
-	show(switches, "switch")
-}
-void updateSwitch() {
-	update(switches)
-}
-
-
-def deviceHandler(evt) {}
-
-private void update(devices) {
-	log.debug "update, request: params: ${params}, devices: $devices.id"
-    
-    
-	//def command = request.JSON?.command
-    def command = params.command
-    //let's create a toggle option here
-	if (command) 
-    {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-        	if(command == "toggle")
-       		{
-            	if(device.currentValue('switch') == "on")
-                  device.off();
-                else
-                  device.on();;
-       		}
-		}
-	}
-}
-
-private show(devices, type) {
-	def device = devices.find { it.id == params.id }
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-	else {
-		def attributeName = type == "motionSensor" ? "motion" : type
-		def s = device.currentState(attributeName)
-		[id: device.id, label: device.displayName, value: s?.value, unitTime: s?.date?.time, type: type]
-	}
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}

smartapps/nick257/shut-the-windows.src/shut-the-windows.groovy

@@ -0,0 +1,73 @@
+definition(
+    name: "Shut the windows!",
+    namespace: "nick257",
+    author: "Nick Mahon",
+    description: "Notifies when last person leaves without closing doors or windows.",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage%402x.png"
+)
+
+preferences 
+{
+	section("As the last of these persons leaves") {
+		input "people", "capability.presenceSensor", multiple: true
+	}
+	section("Check that these are closed") {
+		input "doors", "capability.contactSensor", multiple: true
+	}
+    section("Send Push Notification?") {
+		input "sendPush", "bool", required: false,
+		title: "Send Push Notification when Opened?"
+	}
+	section("Send a text message to this number (optional)") {
+	input "phone", "phone", required: false
+	}
+}
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+	subscribe(people, "presence", presence)
+}
+
+def presence(evt)
+{
+	log.debug "evt.name: $evt.value, $evt.deviceId"
+	if (evt.value == "not present") {
+    	log.debug "isSomeonePresent()? ${isSomeonePresent()}"
+        log.debug "isDoorsOpen()? ${isDoorsOpen()}"
+    	if (!isSomeonePresent() && isDoorsOpen()) {
+        	def device = people.find { it.id == evt.deviceId }
+            log.debug "${device.displayName} left ${location.name} without closing ${isDoorsOpen().join(", ")}"
+            
+            def message = "${device.displayName} left ${location.name} without closing ${isDoorsOpen().join(", ")}"
+			if (sendPush) {
+				sendPush(message)
+			}
+			if (phone) {
+				sendSms(phone, message)
+			}
+		}
+	}
+}
+
+def isSomeonePresent() {
+	log.debug "presence: $people.currentPresence"
+    people.findAll{it.currentPresence == "present"}
+}
+
+def isDoorsOpen() {
+	log.debug "doorss: $doors.currentContact"
+	doors.findAll{it.currentContact == "open"}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -85,8 +85,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
+		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
@@ -179,7 +178,7 @@ def bulbDiscovery() {
 	}
 
 	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out after 10 minutes
+		// Time out to avoid endless discovery
 		state.inBulbDiscovery = false
 		bulbRefreshCount = 0
 		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
@@ -1152,7 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
-	return "Setting color temperature to $ct"
+	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -346,7 +346,7 @@ def devicesList(selector = '') {
 		if (resp.status == 200) {
 			return resp.data
 		} else {
-			log.debug("No response from device list call. ${resp.status} ${resp.data}")
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
 			return []
 		}
 	}
@@ -418,15 +418,9 @@ def updateDevices() {
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		if (state.devices[it.deviceNetworkId])
 		state.devices[it.deviceNetworkId] = null
-		// The reason the implementation is trying to delete this bulb is because it is not longer connected to the LIFX location.
-		// Adding "try" will prevent this exception from happening.
-		// Ideally device health would show to the user that the device is not longer accessible so that the user can either force delete it or remove it from the SmartApp.
-		try {
 		deleteChildDevice(it.deviceNetworkId)
-		} catch (Exception e) {
-			log.debug("Can't remove this device because it's being used by an SmartApp")
-		}
 	}
 }
+
+