Merge pull request #1653 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/danlwelch/zooz-4-in-1.src/zooz-4-in-1.groovy

@@ -1,68 +0,0 @@
-/**
- *  Zooz 4-in-1
- *
- *  Copyright 2017 Dan Welch
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Zooz 4-in-1", namespace: "Danlwelch", author: "Dan Welch") {
-		capability "Illuminance Measurement"
-		capability "Light"
-		capability "Light"
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-
-		attribute "Humidity", "string"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'illuminance' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'motion' attribute
-	// TODO: handle 'temperature' attribute
-	// TODO: handle 'Humidity' attribute
-
-}
-
-// handle commands
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,7 +23,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -58,7 +58,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"
 
 		attribute "networkAddress", "string"
@@ -46,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -67,7 +67,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -51,7 +51,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -56,7 +56,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -40,11 +40,14 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	def resMap
-	if (description.startsWith("zone")) {
-		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
+	def name = null
+	def value = description
+	if (zigbee.isZoneType19(description)) {
+		name = "contact"
+		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
 	}
 	
-	log.debug "Parse returned $resMap"
-	return resMap
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -80,8 +79,7 @@ def parse(String description) {
 		*/
 		event.value = event.value / 10
 	}
-
-	return event ? createEvent(event) : event
+	return event
 }
 
 def setLevel(value) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,8 +23,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
@@ -83,8 +81,9 @@ def parse(String description) {
 
 	if (event) {
 		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			event.value = event.value / 10
+			event.descriptionText = '{{ device.displayName }} power is {{ value }} Watts'
+			event.translatable = true
 		} else if (event.name == "switch") {
 			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
@@ -105,7 +104,7 @@ def parse(String description) {
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }
 
 def off() {

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -88,7 +88,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = [:]
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -45,7 +45,7 @@ metadata {
 
 def parse(String description) {
 	def results = [:]
-	if (description.startsWith("zone") || !isSupportedDescription(description)) {
+	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -87,12 +87,16 @@ private String parseName(String description) {
 }
 
 private String parseValue(String description) {
-	def zs = zigbee.parseZoneStatus(description)
-	if (zs) {
-		zs.isAlarm1Set() ? "active" : "inactive"
-	} else {
-		description
+	if (isZoneType19(description)) {
+		if (translateStatusZoneType19(description)) {
+			return "active"
+		}
+		else {
+			return "inactive"
+		}
 	}
+
+	description
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,7 +488,12 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
+	else if (zigbee.translateStatusZoneType19(description)) {
+		return "open"
+	}
+	else {
+		return "closed"
+	}
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -118,38 +118,15 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
     def buttonState = ""
     def buttonNumber = 0
-    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
             getButtonResult("press")
         }
-        else if (descMap.commandInt == 0) {
+        else if (descMap.command == "00") {
             getButtonResult("release")
         }
     }
-    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
-            getButtonResult("press")
-        }
-        else if (descMap.commandInt == 0) {
-            def button = 1
-            switch(descMap.sourceEndpoint) {
-                case "01":
-                    button = 4
-                    break
-                case "02":
-                    button = 3
-                    break
-                case "03":
-                    button = 1
-                    break
-                case "04":
-                    button = 2
-                    break
-            }
-        
-            getButtonResult("release", button)
-        }
-    }
     else if (descMap.clusterInt == 0x0006) {
         buttonState = "pushed"
         if (descMap.command == "01") {

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,7 +22,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -20,7 +20,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -94,13 +93,7 @@ def on() {
 }
 
 def setLevel(value) {
-    def additionalCmds = []
-    if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
-        additionalCmds = zigbee.on()
-    } else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
-        additionalCmds = refresh()
-    }
-    zigbee.setLevel(value) + additionalCmds
+    zigbee.setLevel(value)
 }
 /**
  * PING is used by Device-Watch in attempt to reach the Device
@@ -110,15 +103,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def installed() {
-    if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
-        if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
-            sendEvent(name: "level", value: 100)
-        }
-    }
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }
 
 def configure() {
@@ -128,5 +113,5 @@ def configure() {
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,7 +28,6 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -29,7 +29,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,7 +21,6 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -26,7 +26,6 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
-        capability "Light"
 
         attribute "colorName", "string"
         command "setGenericName"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,12 +6,6 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -46,9 +40,4 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -29,8 +28,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -27,8 +26,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/curb-v2/curb-control.src/curb-control.groovy

@@ -1,103 +0,0 @@
-/**
- *  Curb Control
- *
- *  Copyright 2016 Savanni D'Gerinel
- *
- */
-definition(
-    name: "Curb Control",
-    namespace: "curb-v2",
-    author: "Savanni D'Gerinel",
-    description: "Control point for Curb/SmartThings integration",
-    category: "Green Living",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Allow Endpoint to Control These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-	}
-}
-
-mappings {
-
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-	path("/switches/:id/:command") {
-		action: [
-			PUT: "updateSwitch"
-		]
-	}
-}
-
-def installed() {}
-
-def updated() {}
-
-
-//switches
-def listSwitches() {
-	switches.collect{device(it,"switch")}
-}
-
-def showSwitch() {
-	show(switches, "switch")
-}
-void updateSwitch() {
-	update(switches)
-}
-
-
-def deviceHandler(evt) {}
-
-private void update(devices) {
-	log.debug "update, request: params: ${params}, devices: $devices.id"
-    
-    
-	//def command = request.JSON?.command
-    def command = params.command
-    //let's create a toggle option here
-	if (command) 
-    {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-        	if(command == "toggle")
-       		{
-            	if(device.currentValue('switch') == "on")
-                  device.off();
-                else
-                  device.on();;
-       		}
-		}
-	}
-}
-
-private show(devices, type) {
-	def device = devices.find { it.id == params.id }
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-	else {
-		def attributeName = type == "motionSensor" ? "motion" : type
-		def s = device.currentState(attributeName)
-		[id: device.id, label: device.displayName, value: s?.value, unitTime: s?.date?.time, type: type]
-	}
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -20,9 +20,6 @@
  *      JLH - 02-15-2014 - Fuller use of ecobee API
  *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
  */
-
-include 'localization'
-
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -89,7 +86,7 @@ def authPage() {
 			if (numFound > 0)  {
 				section("") {
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
-					input(name: "ecobeesensors", title: "Select Ecobee Sensors ({{numFound}} found)", messageArgs: [numFound: numFound], type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
+					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
 			}
 		}

smartapps/smartthings/ecobee-connect.src/i18n/ar.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.ar=قم بتوصيل ثرموستات Ecobee بـ SmartThings.
-'''You are connected.'''.ar=أنت متصل.
-'''Click to enter Ecobee Credentials'''.ar=النقر لإدخال بيانات اعتماد Ecobee
-'''Login'''.ar=تسجيل الدخول
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.ar=انقر أدناه لتسجيل الدخول إلى خدمة ecobee والمصادقة على الوصول إلى SmartThings. تأكد من التمرير للأسفل على الصفحة ٢ والضغط على زر ”السماح“.
-'''Select Your Thermostats'''.ar=تحديد الثرموستات
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة أجهزة ثرموستات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Tap to choose'''.ar=النقر لاختيار
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة مستشعرات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Select Ecobee Sensors ({{numFound}} found)'''.ar=تحديد مستشعرات Ecobee‏ ‎({{numFound}} found)‎
-'''Your ecobee Account is now connected to SmartThings!'''.ar=حساب ecobee متصل الآن بـ SmartThings!
-'''Click 'Done' to finish setup.'''.ar=انقر فوق ”تم“ لإنهاء الإعداد.
-'''The connection could not be established!'''.ar=يتعذر إنشاء الاتصال!
-'''Click 'Done' to return to the menu.'''.ar=انقر فوق ”تم“ للعودة إلى القائمة.
-'''{{deviceName}} is connected to SmartThings'''.ar={{deviceName}} متصل بـ SmartThings
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.ar=تم قطع اتصال {{deviceName}} بـ SmartThings، لأن بيانات اعتماد الوصول قد تغيرت أو فُقدت. يُرجى الانتقال إلى التطبيق الذكي Ecobee (Connect)‎ وإعادة إدخال بيانات اعتماد تسجيل الدخول إلى حسابك.
-'''Your Ecobee thermostat'''.ar=ثرموستات Ecobee

smartapps/smartthings/ecobee-connect.src/i18n/th.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.th=เชื่อมต่อตัวควบคุมอุณหภูมิ Ecobee ของคุณเข้ากับ SmartThings
-'''You are connected.'''.th=คุณได้เชื่อมต่อแล้ว
-'''Click to enter Ecobee Credentials'''.th=คลิกเพื่อใส่ ข้อมูลยืนยันตัวตน Ecobee
-'''Login'''.th=เข้าสู่ระบบ
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.th=แตะด้านล่างเพื่อเข้าสู่บริการ Ecobee และอนุญาตการเข้าถึงของ SmartThings ดูให้แน่ใจว่าได้เลื่อนลงมาที่หน้า 2 แล้วกดปุ่ม 'อนุญาต'
-'''Select Your Thermostats'''.th=เลือกตัวควบคุมอุณหภูมิของคุณ
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการตัวควบคุมอุณหภูมิ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกตัวควบคุมอุณหภูมิที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Tap to choose'''.th=แตะเพื่อเลือก
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการเซ็นเซอร์ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกเซ็นเซอร์ที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Select Ecobee Sensors ({{numFound} found)'''.th=เลือกเซ็นเซอร์ Ecobee ({{numFound}} found)
-'''Your ecobee Account is now connected to SmartThings!'''.th=ตอนนี้บัญชีผู้ใช้ Ecobee ของคุณเชื่อมต่อกับ SmartThings แล้ว
-'''Click 'Done' to finish setup.'''.th=คลิก 'เสร็จสิ้น' เพื่อทำการตั้งค่าให้เสร็จสิ้น
-'''The connection could not be established!'''.th=ไม่สามารถสร้างการเชื่อมต่อได้!
-'''Click 'Done' to return to the menu.'''.th=คลิก 'เสร็จสิ้น' เพื่อกลับไปยังเมนู
-'''{{deviceName}} is connected to SmartThings'''.th={{deviceName}} เชื่อมต่อกับ SmartThings แล้ว
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.th={{deviceName}} ถูกตัดการเชื่อมต่อจาก SmartThings เนื่องจากข้อมูลการเข้าถึงถูกเปลี่ยนแปลงหรือหายไป กรุณาไปที่ Ecobee (การเชื่อมต่อ) SmartApp และใส่ข้อมูลยืนยันตัวตนการเข้าสู่บัญชีผู้ใช้ของคุณอีกครั้ง
-'''Your Ecobee thermostat'''.th=ตัวควบคุมอุณหภูมิ Ecobee ของคุณ

smartapps/smartthings/ecobee-connect.src/i18n/tr.properties

@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.tr=Ecobee termostatınızı SmartThings'e bağlayın.
-'''You are connected.'''.tr=Bağlantı kurdunuz.
-'''Click to enter Ecobee Credentials'''.tr=Ecobee Kimlik Bilgilerinizi girmek için tıklayın
-'''Login'''.tr=Oturum aç
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.tr=Ecobee servisinde oturum açmak ve SmartThings erişimine izin vermek için aşağıya dokunun. Ekranı 2. sayfaya kaydırdığınızdan emin olun ve 'İzin Ver' tuşuna basın.
-'''Select Your Thermostats'''.tr=Termostatlarınızı Seçin
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee termostatlarının listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Tap to choose'''.tr=Seçmek için dokunun
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee sensörlerinin listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Select Ecobee Sensors ({{numFound}} found)'''.tr=Ecobee Sensörlerini seçin ({{numFound}} bulundu)
-'''Your ecobee Account is now connected to SmartThings!'''.tr=Ecobee Hesabınız artık SmartThings'e bağlandı!
-'''Click 'Done' to finish setup.'''.tr=Kurulumu bitirmek için 'Bitti' öğesine tıklayın.
-'''The connection could not be established!'''.tr=Bağlantı kurulamadı!
-'''Click 'Done' to return to the menu.'''.tr=Menüye dönmek için 'Bitti' öğesine tıklayın.
-'''{{deviceName}} is connected to SmartThings'''.tr={{cihazİsmi}} SmartThings'e bağlandı
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.tr=Ecobee termostatınız
-'''Your Ecobee thermostat'''.tr=Ecobee termostatınız

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -17,14 +17,14 @@
  */
 
 definition(
-		name: "Hue (Connect)",
-		namespace: "smartthings",
-		author: "SmartThings",
-		description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
-		category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-		singleInstance: true
+	name: "Hue (Connect)",
+	namespace: "smartthings",
+	author: "SmartThings",
+	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
+	singleInstance: true
 )
 
 preferences {
@@ -85,8 +85,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
@@ -179,7 +178,7 @@ def bulbDiscovery() {
 	}
 
 	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out after 10 minutes
+		// Time out to avoid endless discovery
 		state.inBulbDiscovery = false
 		bulbRefreshCount = 0
 		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
@@ -217,32 +216,32 @@ private sendDeveloperReq() {
 	def token = app.id
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "POST",
-			path: "/api",
-			headers: [
-					HOST: host
-			],
-			body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
+		method: "POST",
+		path: "/api",
+		headers: [
+			HOST: host
+		],
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/api/${state.username}/lights",
-			headers: [
-					HOST: host
-			]], "${selectedHue}", [callback: "lightsHandler"]))
+		method: "GET",
+		path: "/api/${state.username}/lights",
+		headers: [
+			HOST: host
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
 	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/description.xml",
-			headers: [
-					HOST: host
-			]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
+		method: "GET",
+		path: "/description.xml",
+		headers: [
+			HOST: host
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }
 
 private verifyHueBridges() {
@@ -400,7 +399,7 @@ def addBulbs() {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
 				}
 			} else {
-				//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
 				d?.completedSetup = true
@@ -1152,7 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
-	return "Setting color temperature to $ct"
+	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {
@@ -1227,7 +1226,7 @@ private poll() {
 	def uri = "/api/${state.username}/lights/"
 	log.debug "GET: $host$uri"
 	sendHubCommand(new physicalgraph.device.HubAction("GET ${uri} HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
+		"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
 }
 
 private isOnline(id) {
@@ -1244,10 +1243,10 @@ private put(path, body) {
 	log.debug "BODY: ${bodyJSON}"
 
 	sendHubCommand(new physicalgraph.device.HubAction("PUT $uri HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n" +
-			"Content-Length: ${length}\r\n" +
-			"\r\n" +
-			"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
+		"HOST: ${host}\r\n" +
+		"Content-Length: ${length}\r\n" +
+		"\r\n" +
+		"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
 }
 
 /*

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -346,7 +346,7 @@ def devicesList(selector = '') {
 		if (resp.status == 200) {
 			return resp.data
 		} else {
-			log.debug("No response from device list call. ${resp.status} ${resp.data}")
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
 			return []
 		}
 	}
@@ -418,15 +418,9 @@ def updateDevices() {
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		if (state.devices[it.deviceNetworkId])
-			state.devices[it.deviceNetworkId] = null
-		// The reason the implementation is trying to delete this bulb is because it is not longer connected to the LIFX location.
-		// Adding "try" will prevent this exception from happening.
-		// Ideally device health would show to the user that the device is not longer accessible so that the user can either force delete it or remove it from the SmartApp.
-		try {
-			deleteChildDevice(it.deviceNetworkId)
-		} catch (Exception e) {
-			log.debug("Can't remove this device because it's being used by an SmartApp")
-		}
+		state.devices[it.deviceNetworkId] = null
+		deleteChildDevice(it.deviceNetworkId)
 	}
 }
+
+