Merge pull request #1653 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/schwark/platinum-gateway-scene-switch.src/platinum-gateway-scene-switch.groovy

@@ -1,71 +0,0 @@
- /**
- *  Hunter Douglas Platinum Gateway Scene Control Switch for SmartThings
- *  Schwark Satyavolu
- *  Originally based on: Allan Klein's (@allanak) and Mike Maxwell's code
- *
- *  Usage:
- *  1. Add this code as a device handler in the SmartThings IDE
- *  3. Create a device using PlatinumGatewaySceneSwitch as the device handler using a hexadecimal representation of IP:port as the device network ID value
- *  For example, a gateway at 192.168.1.222:522 would have a device network ID of C0A801DE:20A
- *  Note: Port 522 is the default Hunter Douglas Platinum Gateway port so you shouldn't need to change anything after the colon
- *  4. Enjoy the new functionality of the SmartThings app
- * 
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "Platinum Gateway Scene Switch", namespace: "schwark", author: "Schwark Satyavolu") {
-	capability "Switch"
-	command "setSceneNo", ["string"]
-	command "runScene"
-	}
-
-simulator {
-		// TODO: define status and reply messages here
-	}
-
-tiles {
-	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        	state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-        	state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-   		}
-	}
-
-preferences {
-}
-
-    main "switch"
-    details(["switch"])
-}
-
-def updated() {
-}
-
-def runScene() {
-	parent.runScene(state.sceneNo)
-}
-
-def on() {
-	runScene()
-	sendEvent(name: "switch", value: "on")
-}
-
-def off() {
-	runScene()
-	sendEvent(name: "switch", value: "off")
-}
-
-def setSceneNo(sceneNo) {
-	state.sceneNo = sceneNo
-}
-
-
-

devicetypes/schwark/platinum-gateway-shade-switch.src/platinum-gateway-shade-switch.groovy

@@ -1,86 +0,0 @@
-/**
- *  Hunter Douglas Platinum Gateway Shade Control Switch for SmartThings
- *  Schwark Satyavolu
- *  Originally based on: Allan Klein's (@allanak) and Mike Maxwell's code
- *
- *  Usage:
- *  1. Add this code as a device handler in the SmartThings IDE
- *  3. Create a device using PlatinumGatewayShadeSwitch as the device handler using a hexadecimal representation of IP:port as the device network ID value
- *  For example, a gateway at 192.168.1.222:522 would have a device network ID of C0A801DE:20A
- *  Note: Port 522 is the default Hunter Douglas Platinum Gateway port so you shouldn't need to change anything after the colon
- *  4. Enjoy the new functionality of the SmartThings app
- * 
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "Platinum Gateway Shade Switch", namespace: "schwark", author: "Schwark Satyavolu") {
-	capability "Switch"
-	capability "Switch Level"
-	command "setShadeNo", ["string"]
-	}
-
-simulator {
-		// TODO: define status and reply messages here
-	}
-
-tiles {
-	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        	state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
-        	state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-   		}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "level", action:"switch level.setLevel"
-	}
-}
-
-preferences {
-}
-
-    main "switch"
-    details(["switch", "levelSliderControl"])
-}
-
-def installed() {
-	log.debug("installed Shade with settings ${settings}")
-	initialize()
-}
-
-def initialize() {
-}
-
-def updated() {
-}
-
-def on() {
-	return setLevel(100)
-}
-
-def off() {
-	return setLevel(0)
-}
-
-def setLevel(percent) {
-	parent.setShadeLevel(state.shadeNo, percent)
-	if(percent == 100) {
-		sendEvent(name: "switch", value: "on")
-	} else if (percent == 0) {
-		sendEvent(name: "switch", value: "off")
-	}
-	sendEvent(name: "level", value: percent)
-}
-
-def setShadeNo(shadeNo) {
-	state.shadeNo = shadeNo
-}
-
-
-

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,7 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -60,7 +59,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
+    def cmds = zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -82,7 +82,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()       //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 /**

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -18,6 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 
 		command "setAdjustedColor"
         command "reset"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,7 +14,8 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-        capability "Health Check"
+		capability "Health Check"
+		capability "Light"
 
         command "refresh"
 	}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -16,6 +16,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Health Check"
+        capability "Light"
 
         command "refresh"
     }

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -69,292 +69,35 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def event = [:]
-	def finalResult = isKnownDescription(description)
-	if (finalResult) {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-			event = null
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			event = createEvent(name: "power", value: powerValue)
-
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
-		}
-		else {
-			event = createEvent(name: finalResult.type, value: finalResult.value)
-		}
-	}
-	else {
+	def event = zigbee.getEvent(description)
+	if (!event) {
 		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug parseDescriptionAsMap(description)
+		log.debug zigbee.parseDescriptionAsMap(description)
+	} else if (event.name == "power") {
+		/*
+			Dividing by 10 as the Divisor is 10000 and unit is kW for the device. Simplifying to 10 power level is an integer.
+		*/
+		event.value = event.value / 10
 	}
 	return event
 }
 
-// Commands to device
-def zigbeeCommand(cluster, attribute){
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
+def setLevel(value) {
+	zigbee.setLevel(value)
 }
 
 def off() {
-	zigbeeCommand("6", "0")
+	zigbee.off()
 }
 
 def on() {
-	zigbeeCommand("6", "1")
-}
-
-def setLevel(value) {
-	value = value as Integer
-	if (value == 0) {
-		off()
-	}
-	else {
-		if (device.latestValue("switch") == "off") {
-			sendEvent(name: "switch", value: "on")
-		}
-		sendEvent(name: "level", value: value)
-		setLevelWithRate(value, "0000")		//value is between 0 to 100
-	}
+	zigbee.on()
 }
 
 def refresh() {
-	[
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
-			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
-	]
-
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.electricMeasurementPowerRefresh()
 }
 
 def configure() {
-	refresh() + onOffConfig() + levelConfig() + powerConfig()
-}
-
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-//Need to reverse array of size 2
-private byte[] reverseArray(byte[] array) {
-	byte tmp;
-	tmp = array[1];
-	array[1] = array[0];
-	array[0] = tmp;
-	return array
-}
-
-def parseDescriptionAsMap(description) {
-	if (description?.startsWith("read attr -")) {
-		(description - "read attr - ").split(",").inject([:]) { map, param ->
-			def nameAndValue = param.split(":")
-			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
-		}
-	}
-	else if (description?.startsWith("catchall: ")) {
-		def seg = (description - "catchall: ").split(" ")
-		def zigbeeMap = [:]
-		zigbeeMap += [raw: (description - "catchall: ")]
-		zigbeeMap += [profileId: seg[0]]
-		zigbeeMap += [clusterId: seg[1]]
-		zigbeeMap += [sourceEndpoint: seg[2]]
-		zigbeeMap += [destinationEndpoint: seg[3]]
-		zigbeeMap += [options: seg[4]]
-		zigbeeMap += [messageType: seg[5]]
-		zigbeeMap += [dni: seg[6]]
-		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
-		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
-		zigbeeMap += [manufacturerId: seg[9]]
-		zigbeeMap += [command: seg[10]]
-		zigbeeMap += [direction: seg[11]]
-		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
-			it.join('')
-		} : []]
-
-		zigbeeMap
-	}
-}
-
-def isKnownDescription(description) {
-	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
-		def descMap = parseDescriptionAsMap(description)
-		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
-			isDescriptionOnOff(descMap)
-		}
-		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
-			isDescriptionLevel(descMap)
-		}
-		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
-			isDescriptionPower(descMap)
-		}
-		else {
-			return [:]
-		}
-	}
-	else if(description?.startsWith("on/off:")) {
-		def switchValue = description?.endsWith("1") ? "on" : "off"
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return [:]
-	}
-}
-
-def isDescriptionOnOff(descMap) {
-	def switchValue = "undefined"
-	if (descMap.cluster == "0006") {				//cluster info from read attr
-		value = descMap.value
-		if (value == "01"){
-			switchValue = "on"
-		}
-		else if (value == "00"){
-			switchValue = "off"
-		}
-	}
-	else if (descMap.clusterId == "0006") {
-		//cluster info from catch all
-		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
-		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
-		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
-			switchValue = "on"
-		}
-		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
-			switchValue = "off"
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "switch (0006) capability configured successfully"]
-		}
-	}
-
-	if (switchValue != "undefined"){
-		return	[type: "switch", value : switchValue]
-	}
-	else {
-		return [:]
-	}
-
-}
-
-//@return - false or "success" or level [0-100]
-def isDescriptionLevel(descMap) {
-	def dimmerValue = -1
-	if (descMap.cluster == "0008"){
-		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
-		def value = convertHexToInt(descMap.value)
-		dimmerValue = Math.round(value * 100 / 255)
-		if(dimmerValue==0 && value > 0) {
-			dimmerValue = 1						//handling for non-zero hex value less than 3
-		}
-	}
-	else if(descMap.clusterId == "0008") {
-		if(descMap.command=="0B"){
-			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
-		}
-		else if(descMap.command=="07"){
-			return	[type: "update", value : "level (0008) capability configured successfully"]
-		}
-	}
-
-	if (dimmerValue != -1){
-		return	[type: "level", value : dimmerValue]
-	}
-	else {
-		return [:]
-	}
-}
-
-def isDescriptionPower(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0B04") {
-		if (descMap.attrId == "050b") {
-			if(descMap.value!="ffff")
-				powerValue = convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0B04") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0B04) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return [:]
-	}
-}
-
-
-def onOffConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
-	]
-}
-
-//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
-//min level change is 01
-def levelConfig() {
-	[
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
-			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
-	]
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 05
-def powerConfig() {
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
-		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
-	]
-}
-
-def setLevelWithRate(level, rate) {
-	if(rate == null){
-		rate = "0000"
-	}
-	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
-	[
-			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
-			"delay 2000"
-	]
-}
-
-String convertToHexString(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
+	refresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.electricMeasurementPowerConfig()
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -13,10 +13,9 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -25,9 +24,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 
@@ -45,32 +44,32 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
-				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
-				])
+					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+			])
 		}
 	}
 
 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
+			tileAttribute("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label: '${currentValue} W'
 			}
 		}
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "switch"
-		details(["switch","refresh"])
+		details(["switch", "refresh"])
 	}
 }
 
@@ -78,47 +77,29 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
-	def finalResult = zigbee.getKnownDescription(description)
-	def event = [:]
+	def event = zigbee.getEvent(description)
 
-	//TODO: Remove this after getKnownDescription can parse it automatically
-	if (!finalResult && description!="updated")
-		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
-
-	if (finalResult) {
-		log.info "final result = $finalResult"
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-			event = null
+	if (event) {
+		if (event.name == "power") {
+			event.value = event.value / 10
+			event.descriptionText = '{{ device.displayName }} power is {{ value }} Watts'
+			event.translatable = true
+		} else if (event.name == "switch") {
+			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
 		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			event = createEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/
-		}
-		else {
-			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			event = createEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-		}
-	}
-	else {
+	} else {
 		def cluster = zigbee.parse(description)
 
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
+		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
 			if (cluster.data[0] == 0x00) {
 				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
 				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
+			} else {
 				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
 				event = null
 			}
-		}
-		else {
+		} else {
 			log.warn "DID NOT PARSE MESSAGE for description : $description"
 			log.debug "${cluster}"
 		}
@@ -150,43 +131,6 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
+	refresh() + zigbee.onOffConfig(0, 300) + zigbee.electricMeasurementPowerConfig()
 }
 
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 01
-def powerConfig() {
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
-		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-//TODO: Remove this after getKnownDescription can parse it automatically
-def getPowerDescription(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0B04") {
-		if (descMap.attrId == "050b") {
-			if(descMap.value!="ffff")
-				powerValue = zigbee.convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0B04") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0B04) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return [:]
-	}
-}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartSense Moisture Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -43,10 +43,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
-				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
-				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
-				])
+					"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+					"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+					"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+			])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -55,32 +55,32 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
+				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
+				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+			state "temperature", label: '${currentValue}°',
+					backgroundColors: [
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
+			state "battery", label: '${currentValue}% battery', unit: ""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
-		main (["water", "temperature"])
+		main(["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
@@ -88,117 +88,43 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
+	// getEvent will handle temperature and humidity
+	Map map = zigbee.getEvent(description)
+	if (!map) {
+		if (description?.startsWith('zone status')) {
+			map = parseIasMessage(description)
+		} else {
+			Map descMap = zigbee.parseDescriptionAsMap(description)
+			if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+				if (descMap.data[0] == "00") {
+					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+				} else {
+					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
+				}
+			}
+		}
 	}
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
+		List cmds = zigbee.enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-				break
-
-            case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-                break
-        }
-    }
-
-    return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
-	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
-	}
-}
-
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -239,40 +165,18 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
-
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
-	]
-}
-
 private Map getMoistureResult(value) {
 	log.debug "water"
-    def descriptionText
-    if ( value == "wet" )
-    	descriptionText = '{{ device.displayName }} is wet'
-    else
-    	descriptionText = '{{ device.displayName }} is dry'
+	def descriptionText
+	if (value == "wet")
+		descriptionText = '{{ device.displayName }} is wet'
+	else
+		descriptionText = '{{ device.displayName }} is dry'
 	return [
-		name: 'water',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+			name           : 'water',
+			value          : value,
+			descriptionText: descriptionText,
+			translatable   : true
 	]
 }
 
@@ -285,12 +189,10 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
-	]
+	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 
-	return refreshCmds + enrollResponse()
+	return refreshCmds + zigbee.enrollResponse()
 }
 
 def configure() {
@@ -302,42 +204,3 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -45,10 +45,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
-				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
-				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
-				])
+					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+			])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -57,30 +57,30 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+			state("temperature", label: '${currentValue}°', unit: "F",
+					backgroundColors: [
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
+			state "battery", label: '${currentValue}% battery', unit: ""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main(["motion", "temperature"])
@@ -90,116 +90,40 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
+	Map map = zigbee.getEvent(description)
+	if (!map) {
+		if (description?.startsWith('zone status')) {
+			map = parseIasMessage(description)
+		} else {
+			Map descMap = zigbee.parseDescriptionAsMap(description)
+			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+				if (descMap.data[0] == "00") {
+					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+				} else {
+					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
+				}
+			} else if (descMap.clusterInt == 0x0406 && descMap.attrInt == 0x0000) {
+				def value = descMap.value.endsWith("01") ? "active" : "inactive"
+				log.warn "Doing a read attr motion event"
+				resultMap = getMotionResult(value)
+			}
+		}
 	}
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
 	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
+		List cmds = zigbee.enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-				break
-
-			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
-
-			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
-				break
-		}
-	}
-
-	return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
-	}
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
@@ -207,15 +131,6 @@ private Map parseIasMessage(String description) {
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
-	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
-	}
-}
-
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -255,36 +170,14 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
-
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
-	]
-}
-
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
-		name: 'motion',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+			name           : 'motion',
+			value          : value,
+			descriptionText: descriptionText,
+			translatable   : true
 	]
 }
 
@@ -292,17 +185,16 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
 	log.debug "refresh called"
-	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
-	]
 
-	return refreshCmds + enrollResponse()
+	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
+
+	return refreshCmds + zigbee.enrollResponse()
 }
 
 def configure() {
@@ -314,42 +206,3 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -14,22 +14,23 @@
  *  under the License.
  */
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
- 		capability "Contact Sensor"
- 		capability "Acceleration Sensor"
- 		capability "Refresh"
- 		capability "Temperature Measurement"
+		capability "Contact Sensor"
+		capability "Acceleration Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
 		capability "Health Check"
 
- 		command "enrollResponse"
- 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
+		command "enrollResponse"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
@@ -57,11 +58,11 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
-				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
-				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
-				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
-				])
+					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+			])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -73,211 +74,170 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
-				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
+		multiAttributeTile(name: "status", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
+				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e")
+			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+			state("temperature", label: '${currentValue}°',
+					backgroundColors: [
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
+			state "battery", label: '${currentValue}% battery', unit: ""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 
 		main(["status", "acceleration", "temperature"])
 		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
- }
+}
 
 def parse(String description) {
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
+	def maps = []
+	maps << zigbee.getEvent(description)
+	if (!maps[0]) {
+		maps = []
+		if (description?.startsWith('zone status')) {
+			maps += parseIasMessage(description)
+		} else {
+			Map descMap = zigbee.parseDescriptionAsMap(description)
+			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+				maps << getBatteryResult(Integer.parseInt(descMap.value, 16))
+			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+				if (descMap.data[0] == "00") {
+					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+				} else {
+					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
+				}
+			} else {
+
+				maps += handleAcceleration(descMap)
+			}
+		}
+	} else if (maps[0].name == "temperature") {
+		def map = maps[0]
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}
 
-	def result = map ? createEvent(map) : [:]
-
+	def result = maps.inject([]) {acc, it ->
+		if (it) {
+			acc << createEvent(it)
+		}
+	}
 	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
+		List cmds = zigbee.enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	return result
+}
+
+private List<Map> handleAcceleration(descMap) {
+	def result = []
+	if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0010) {
+		def value = descMap.value == "01" ? "active" : "inactive"
+		log.debug "Acceleration $value"
+		result << [
+				name           : "acceleration",
+				value          : value,
+				descriptionText: "{{ device.displayName }} was $value",
+				isStateChange  : isStateChange(device, "acceleration", value),
+				translatable   : true
+		]
+
+		if (descMap.additionalAttrs) {
+			result += parseAxis(descMap.additionalAttrs)
+		}
+	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
+		def addAttrs = descMap.additionalAttrs
+		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
+		result += parseAxis(addAttrs)
 	}
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	log.debug cluster
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-			break
+private List<Map> parseAxis(List<Map> attrData) {
+	def results = []
+	def x = hexToSignedInt(attrData.find { it.attrInt == 0x0012 }?.value)
+	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
+	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
 
-			case 0xFC02:
-				log.debug 'ACCELERATION'
-			break
-
-			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-			break
-		}
+	def xyzResults = [:]
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
+	} else {
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
+		// This may change in the future
+		xyzResults.x = z
+		xyzResults.y = x
+		xyzResults.z = y
 	}
 
-	return resultMap
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		results += garageEvent(xyzResults.z)
+
+	def value = "${xyzResults.x},${xyzResults.y},${xyzResults.z}"
+	results << [
+			name           : "threeAxis",
+			value          : value,
+			linkText       : getLinkText(device),
+			descriptionText: "${getLinkText(device)} was ${value}",
+			handlerName    : name,
+			isStateChange  : isStateChange(device, "threeAxis", value),
+			displayed      : false
+	]
+	results
 }
 
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-	cluster.command == 0x0B ||
-	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private List parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-
-	List result = []
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		result << getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-		if (descMap.value.size() == 32) {
-			// value will look like 00ae29001403e2290013001629001201
-			// breaking this apart and swapping byte order where appropriate, this breaks down to:
-			//   X (0x0012) = 0x0016
-			//   Y (0x0013) = 0x03E2
-			//   Z (0x0014) = 0x00AE
-			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
-			// this will be fixed in a future update
-			def threeAxisAttributes = descMap.value[0..-9]
-			result << parseAxis(threeAxisAttributes)
-			descMap.value = descMap.value[-2..-1]
-		}
-		result << getAccelerationResult(descMap.value)
-	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-
-	return result
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
+private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	Map resultMap = [:]
+	List<Map> results = []
 
-			if (garageSensor != "Yes"){
-		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-			}
+	if (garageSensor != "Yes") {
+		def value = zs.isAlarm1Set() ? 'open' : 'closed'
+		log.debug "Contact: ${device.displayName} value = ${value}"
+		def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+		results << [name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true]
+		results << [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	}
 
-	return resultMap
+	return results
 }
 
-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-	else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
-		}
-		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
-		}
-	}
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
-		} else {
-			return Math.round(celsiusToFahrenheit(celsius))
-		}
-	}
-
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 
@@ -316,54 +276,24 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-private Map getTemperatureResult(value) {
-	log.debug "Temperature"
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
+List<Map> garageEvent(zValue) {
+	List<Map> results = []
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue > 900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	} else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
 	}
-	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
-			'{{ device.displayName }} was {{ value }}°F'
-
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		translatable: true,
-		unit: temperatureScale
-	]
-}
-
-private Map getContactResult(value) {
-	log.debug "Contact: ${device.displayName} value = ${value}"
-	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
-}
-
-private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
-	def name = "acceleration"
-    def value
-    def descriptionText
-
-	if ( numValue.endsWith("1") ) {
-    	value = "active"
-        descriptionText = '{{ device.displayName }} was active'
-    } else {
-    	value = "inactive"
-        descriptionText = '{{ device.displayName }} was inactive'
-    }
-
-	def isStateChange = isStateChange(device, name, value)
-	return [
-		name: name,
-		value: value,
-		descriptionText: descriptionText,
-		isStateChange: isStateChange,
-		translatable: true
-	]
+	if (contactValue != null) {
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+		results << [name: 'contact', value: contactValue, descriptionText: descriptionText, displayed: false, translatable: true]
+		results << [name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true]
+	}
+	results
 }
 
 /**
@@ -376,27 +306,12 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Values "
 
-	def refreshCmds = []
+	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
+			zigbee.enrollResponse()
 
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
-	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
-	}
-
-	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
-
-	return refreshCmds + enrollResponse()
+	return refreshCmds
 }
 
 def configure() {
@@ -405,61 +320,54 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
+	def configCmds = []
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		log.debug "Refreshing Values for manufacturer: SmartThings "
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
+        */
+		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		configCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+	} else {
+		// Write a motion threshold of 2 * .063g = .126g
+		// Currently due to a Centralite firmware issue, this will cause a read attribute response that
+		// indicates acceleration even when there isn't.
+		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+	}
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = zigbee.batteryConfig() +
+	configCmds += zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+			zigbee.configureReporting(0xFC02, 0x0010, DataType.BITMAP8, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
 	return refresh() + configCmds
 }
 
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
-	]
-}
-
-private Map parseAxis(String description) {
-	def z = hexToSignedInt(description[0..3])
-	def y = hexToSignedInt(description[10..13])
-	def x = hexToSignedInt(description[20..23])
-	def xyzResults = [x: x, y: y, z: z]
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		} else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
 	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		} else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
 	}
-
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		garageEvent(xyzResults.z)
-
-	getXyzResult(xyzResults, description)
 }
 
 private hexToSignedInt(hexVal) {
@@ -467,44 +375,6 @@ private hexToSignedInt(hexVal) {
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }
 
-def garageEvent(zValue) {
-	def absValue = zValue.abs()
-	def contactValue = null
-	def garageValue = null
-	if (absValue>900) {
-		contactValue = 'closed'
-		garageValue = 'garage-closed'
-	}
-	else if (absValue < 100) {
-		contactValue = 'open'
-		garageValue = 'garage-open'
-	}
-	if (contactValue != null){
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
-	}
-}
-
-private Map getXyzResult(results, description) {
-	def name = "threeAxis"
-	def value = "${results.x},${results.y},${results.z}"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: name,
-		isStateChange: isStateChange,
-		displayed: false
-	]
-}
-
 private getManufacturerCode() {
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		return "0x110A"
@@ -516,25 +386,3 @@ private getManufacturerCode() {
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -43,155 +43,77 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 			}
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+			state "temperature", label: '${currentValue}°',
+					backgroundColors: [
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
+			state "battery", label: '${currentValue}% battery', unit: ""
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
-		main (["contact", "temperature"])
-		details(["contact","temperature","battery","refresh"])
+		main(["contact", "temperature"])
+		details(["contact", "temperature", "battery", "refresh"])
 	}
 }
 
 def parse(String description) {
 	log.debug "description: $description"
 
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
+	Map map = zigbee.getEvent(description)
+	if (!map) {
+		if (description?.startsWith('zone status')) {
+			map = parseIasMessage(description)
+		} else {
+			Map descMap = zigbee.parseDescriptionAsMap(description)
+			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+				if (descMap.data[0] == "00") {
+					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+				} else {
+					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
+				}
+			}
+		}
 	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-    else if (description?.startsWith('zone status')) {
-    	map = parseIasMessage(description)
-    }
 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]
 
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
-}
-
-private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-                break
-
-            case 0x0402:
-				if (cluster.command == 0x07){
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-                break
-        }
-    }
-
-    return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-        cluster.command == 0x0B ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
-}
-
-private int getHumidity(value) {
-    return Math.round(Double.parseDouble(value))
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	if (description?.startsWith('enroll request')) {
+		List cmds = zigbee.enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-
-	return resultMap
+	return result
 }
 
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
-	}
-}
-
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
@@ -204,8 +126,8 @@ private Map getBatteryResult(rawValue) {
 		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
+		if (roundedPct <= 0)
+			roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 		result.name = 'battery'
@@ -214,31 +136,14 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	def linkText = getLinkText(device)
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
-	]
-}
-
 private Map getContactResult(value) {
 	log.debug 'Contact Status'
 	def linkText = getLinkText(device)
 	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
 	return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText
+			name           : 'contact',
+			value          : value,
+			descriptionText: descriptionText
 	]
 }
 
@@ -251,12 +156,10 @@ def ping() {
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
-	]
+	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 
-	return refreshCmds + enrollResponse()
+	return refreshCmds + zigbee.enrollResponse()
 }
 
 def configure() {
@@ -268,44 +171,5 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Resending the CIE in case the enroll request is sent before CIE is written
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -13,8 +13,10 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
+
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition(name: "SmartSense Temp/Humidity Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -31,7 +33,7 @@ metadata {
 		status 'H 45': 'catchall: 0104 FC45 01 01 0140 00 D9B9 00 04 C2DF 0A 01 0000218911'
 		status 'H 57': 'catchall: 0104 FC45 01 01 0140 00 4E55 00 04 C2DF 0A 01 0000211316'
 		status 'H 53': 'catchall: 0104 FC45 01 01 0140 00 20CD 00 04 C2DF 0A 01 0000219814'
-		status 'H 43':  'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
+		status 'H 43': 'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
 	}
 
 	preferences {
@@ -40,28 +42,28 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"temperature", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState "temperature", label:'${currentValue}°',
-					backgroundColors:[
-						[value: 31, color: "#153591"],
-						[value: 44, color: "#1e9cbb"],
-						[value: 59, color: "#90d2a7"],
-						[value: 74, color: "#44b621"],
-						[value: 84, color: "#f1d801"],
-						[value: 95, color: "#d04e00"],
-						[value: 96, color: "#bc2323"]
-					]
+		multiAttributeTile(name: "temperature", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState "temperature", label: '${currentValue}°',
+						backgroundColors: [
+								[value: 31, color: "#153591"],
+								[value: 44, color: "#1e9cbb"],
+								[value: 59, color: "#90d2a7"],
+								[value: 74, color: "#44b621"],
+								[value: 84, color: "#f1d801"],
+								[value: 95, color: "#d04e00"],
+								[value: 96, color: "#bc2323"]
+						]
 			}
 		}
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
+			state "humidity", label: '${currentValue}% humidity', unit: ""
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery'
+			state "battery", label: '${currentValue}% battery'
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "temperature", "humidity"
@@ -72,142 +74,31 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"
 
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
-		map = parseCustomMessage(description)
+	// getEvent will handle temperature and humidity
+	Map map = zigbee.getEvent(description)
+	if (!map) {
+		Map descMap = zigbee.parseDescriptionAsMap(description)
+		if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
+			map = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
+			if (descMap.data[0] == "00") {
+				log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
+				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+			} else {
+				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
+			}
+		}
 	}
 
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : [:]
 }
 
-private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
-                break
-
-            case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
-
-			case 0xFC45:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-					resultMap = getHumidityResult(display)
-				}
-                break
-        }
-    }
-
-    return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-        cluster.command == 0x0B ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-	else if (descMap.cluster == "FC45" && descMap.attrId == "0000") {
-		def value = getReportAttributeHumidity(descMap.value)
-		resultMap = getHumidityResult(value)
-	}
-
-	return resultMap
-}
-
-def getReportAttributeHumidity(String value) {
-    def humidity = null
-    if (value?.trim()) {
-        try {
-        	// value is hex with no decimal
-            def pct = Integer.parseInt(value.trim(), 16) / 100
-            humidity = String.format('%.0f', pct)
-        } catch(NumberFormatException nfe) {
-            log.debug "Error converting $value to humidity"
-        }
-    }
-    return humidity
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	else if (description?.startsWith('humidity: ')) {
-		def pct = (description - "humidity: " - "%").trim()
-		if (pct.isNumber()) {
-			def value = Math.round(new BigDecimal(pct)).toString()
-			resultMap = getHumidityResult(value)
-		} else {
-			log.error "invalid humidity: ${pct}"
-		}
-	}
-	return resultMap
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
-	}
-}
-
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
-    def result = [:]
+  def result = [:]
 
 	def volts = rawValue / 10
 	if (!(rawValue == 0 || rawValue == 255)) {
@@ -226,41 +117,22 @@ private Map getBatteryResult(rawValue) {
 	return result
 }
 
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	def linkText = getLinkText(device)
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-		unit: temperatureScale
-	]
-}
-
-private Map getHumidityResult(value) {
-	log.debug 'Humidity'
-	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
-}
-
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x0001, 0x0020) // Read the Battery Level
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020)
+	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
+			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300)
 }
 
 def configure() {
@@ -269,35 +141,8 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
-	def humidityConfigCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
-		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
-	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+	return refresh()
 }

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
@@ -82,7 +83,7 @@ def parse(String description) {
         def result = event ? createEvent(event) : []
 
         if (description?.startsWith('enroll request')) {
-            List cmds = enrollResponse()
+            List cmds = zigbee.enrollResponse()
             result = cmds?.collect { new physicalgraph.device.HubAction(it) }
         }
         return result
@@ -160,7 +161,7 @@ private Map parseNonIasButtonMessage(Map descMap){
 def refresh() {
     log.debug "Refreshing Battery"
 
-    return zigbee.readAttribute(0x0001, 0x20) +
+    return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
             zigbee.enrollResponse()
 }
 
@@ -177,9 +178,9 @@ def configure() {
     }
     return zigbee.onOffConfig() +
             zigbee.levelConfig() +
-            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
+            zigbee.configureReporting(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20, DataType.UINT8, 30, 21600, 0x01) +
             zigbee.enrollResponse() +
-            zigbee.readAttribute(0x0001, 0x20) +
+            zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
             cmds
 
 }

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -97,7 +97,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    zigbee.setLevel(value) + (value?.toInteger() > 0 ? zigbee.on() : [])
 }
 
 /**

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -13,6 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
+
  metadata {
     definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
     {
@@ -71,9 +73,6 @@ private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
 private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
 
-private getTYPE_U8() { 0x20 }
-private getTYPE_ENUM8() { 0x30 }
-
 // Public methods
 def installed() {
     log.trace "installed()"
@@ -86,9 +85,9 @@ def uninstalled() {
 def configure() {
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
-                                  TYPE_ENUM8, 0, 3600, null) +
+                                  DataType.ENUM8, 0, 3600, null) +
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
-                                  TYPE_U8, 600, 21600, 0x01)
+                                  DataType.UINT8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
     return refresh() + cmds // send refresh cmds as part of config
 }

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -15,6 +15,7 @@
  *
  *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
 	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -121,7 +122,7 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -131,7 +132,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -15,6 +15,7 @@
  *
  *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -139,7 +140,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -23,6 +23,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15S", deviceJoinName: "Leviton Lumina RF Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -11,6 +11,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
@@ -66,8 +67,6 @@ private getCLUSTER_BASIC() { 0x0000 }
 private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
 private getCLUSTER_POWER() { 0x0001 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
-private getTYPE_U8() { 0x20 }
-private getTYPE_ENUM8() { 0x30 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
@@ -128,8 +127,8 @@ def refresh() {
     zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
     zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
     zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, DataType.UINT8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, DataType.ENUM8, 5, 21600, 1)
 }
 
 def configure() {

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -89,7 +89,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -11,6 +11,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
 	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -107,7 +108,7 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
@@ -115,7 +116,7 @@ def refreshAttributes() {
 }
 
 def setLevel(value) {
-	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -11,6 +11,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.zcl.DataType
 
 metadata {
     definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -123,7 +124,7 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
@@ -135,7 +136,7 @@ def setColorTemperature(value) {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def setColor(value){

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -90,7 +90,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def refresh() {

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -73,7 +73,7 @@ def authPage() {
 			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
 				section() {
 					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
+					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}", description:description
 				}
 			}
 		} else {
@@ -146,19 +146,24 @@ def callback() {
 
 		// log.debug "PARAMS: ${params}"
 
-		httpPost(params) { resp ->
+		try {
+            httpPost(params) { resp ->
 
-			def slurper = new JsonSlurper()
+                def slurper = new JsonSlurper()
 
-			resp.data.each { key, value ->
-				def data = slurper.parseText(key)
-
-				state.refreshToken = data.refresh_token
-				state.authToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
-				// log.debug "swapped token: $resp.data"
-			}
-		}
+                resp.data.each { key, value ->
+                    def data = slurper.parseText(key)
+					log.debug "Data: $data"
+                    state.refreshToken = data.refresh_token
+                    state.authToken = data.access_token
+                    //state.accessToken = data.access_token
+                    state.tokenExpires = now() + (data.expires_in * 1000)
+                    // log.debug "swapped token: $resp.data"
+                }
+            }
+        } catch (Exception e) {
+			log.debug "callback: Call failed $e"
+        }
 
 		// Handle success and failure here, and render stuff accordingly
 		if (state.authToken) {
@@ -387,18 +392,18 @@ def getDeviceList() {
 	state.deviceDetail = [:]
 	state.deviceState = [:]
 
-	apiGet("/api/devicelist") { response ->
+	apiGet("/api/getstationsdata") { response ->
 		response.data.body.devices.each { value ->
 			def key = value._id
 			deviceList[key] = "${value.station_name}: ${value.module_name}"
 			state.deviceDetail[key] = value
             state.deviceState[key] = value.dashboard_data
-		}
-		response.data.body.modules.each { value ->
-			def key = value._id
-			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
-			state.deviceDetail[key] = value
-            state.deviceState[key] = value.dashboard_data
+            value.modules.each { value2 ->            
+                def key2 = value2._id
+                deviceList[key2] = "${value.station_name}: ${value2.module_name}"
+                state.deviceDetail[key2] = value2
+                state.deviceState[key2] = value2.dashboard_data            
+            }
 		}
 	}
 
@@ -448,6 +453,7 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
+
 	if(now() >= state.tokenExpires) {
 		refreshToken();
 	}
@@ -467,12 +473,16 @@ def apiGet(String path, Map query, Closure callback) {
 	} catch (Exception e) {
 		// This is most likely due to an invalid token. Try to refresh it and try again.
 		log.debug "apiGet: Call failed $e"
-		if(refreshToken()) {
-			log.debug "apiGet: Trying again after refreshing token"
-			httpGet(params)	{ response ->
-				callback.call(response)
-			}
-		}
+        if(refreshToken()) {
+            log.debug "apiGet: Trying again after refreshing token"
+            try {
+                httpGet(params)	{ response ->
+                    callback.call(response)
+                }
+            } catch (Exception f) {
+                log.debug "apiGet: Call failed $f"
+            }
+        }
 	}
 }
 
@@ -561,4 +571,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -51,7 +51,7 @@ definition(
 
 //Device Inputs
 preferences {
-	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
+	section("Allow OpenT2T to control these things...") {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
@@ -329,34 +329,38 @@ private getDeviceType(device) {
 		switch (it.name.toLowerCase()) {
 			case "switch":
 				deviceType = "switch"
-				break
-			case "switch level":
-				deviceType = "light"
+				if (caps.any { it.name.toLowerCase() == "power meter" }) {
+					return deviceType
+				}
+				if (caps.any { it.name.toLowerCase() == "switch level" }) {
+					deviceType = "light"
+					return deviceType
+				}
 				break
 			case "contact sensor":
 				deviceType = "contactSensor"
-				break
+				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
-				break
+				return deviceType
 			case "lock":
 				deviceType = "lock"
-				break
+				return deviceType
 			case "video camera":
 				deviceType = "camera"
-				break
+				return deviceType
 			case "motion sensor":
 				deviceType = "motionSensor"
-				break
+				return deviceType
 			case "presence sensor":
 				deviceType = "presenceSensor"
-				break
+				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
-				break
+				return deviceType
 			case "water sensor":
 				deviceType = "waterSensor"
-				break
+				return deviceType
 			default:
 				break
 		}

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -57,7 +57,7 @@ def authPage(){
         atomicState.accessToken = state.accessToken
     }
 
-	def redirectUrl = oauthInitUrl()
+    def redirectUrl = oauthInitUrl()
     def uninstallAllowed = false
     def oauthTokenProvided = false
     if(atomicState.authToken){
@@ -78,9 +78,9 @@ def authPage(){
         }
     }else{
         return dynamicPage(name: "auth", title: "Step 1 of 2 - Completed", nextPage:"deviceList", uninstall:uninstallAllowed) {
-	        section(){
+            section(){
                paragraph "You are logged in to myplantlink.com, tap next to continue", image: iconUrl
- 			   href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
+               href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
             }
         }
     }
@@ -137,36 +137,44 @@ def dock_sensor(device_serial, expected_plant_name) {
             contentType: "application/json",
     ]
     log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
-    httpPost(docking_params) { docking_response ->
-        if (parse_api_response(docking_response, "Docking a link")) {
-            if (docking_response.data.plants.size() == 0) {
-                log.debug "creating plant for - ${expected_plant_name}"
-                plant_post_body_map["name"] = expected_plant_name
-                plant_post_body_map['links_key'] = [docking_response.data.key]
-                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
-                plant_post_params["body"] = plant_post_body_json_builder.toString()
-                httpPost(plant_post_params) { plant_post_response ->
-                    if(parse_api_response(plant_post_response, 'creating plant')){
-                        def attached_map = atomicState.attached_sensors
-                        attached_map[device_serial] = plant_post_response.data
-                        atomicState.attached_sensors = attached_map
+    try {
+        httpPost(docking_params) { docking_response ->
+            if (parse_api_response(docking_response, "Docking a link")) {
+                if (docking_response.data.plants.size() == 0) {
+                    log.debug "creating plant for - ${expected_plant_name}"
+                    plant_post_body_map["name"] = expected_plant_name
+                    plant_post_body_map['links_key'] = [docking_response.data.key]
+                    def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
+                    plant_post_params["body"] = plant_post_body_json_builder.toString()
+                    try {
+                        httpPost(plant_post_params) { plant_post_response ->
+                            if(parse_api_response(plant_post_response, 'creating plant')){
+                                def attached_map = atomicState.attached_sensors
+                                attached_map[device_serial] = plant_post_response.data
+                                atomicState.attached_sensors = attached_map
+                            }
+                        }
+                    } catch (Exception f) {
+                        log.debug "call failed $f"
                     }
+                } else {
+                    def plant = docking_response.data.plants[0]
+                    def attached_map = atomicState.attached_sensors
+                    attached_map[device_serial] = plant
+                    atomicState.attached_sensors = attached_map
+                    checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
                 }
-            } else {
-                def plant = docking_response.data.plants[0]
-                def attached_map = atomicState.attached_sensors
-                attached_map[device_serial] = plant
-                atomicState.attached_sensors = attached_map
-                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
             }
         }
+    } catch (Exception e) {
+        log.debug "call failed $e"
     }
     return true
 }
 
 def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
     def plant_put_params = [
-		uri : appSettings.https_plantLinkServer,
+        uri : appSettings.https_plantLinkServer,
         headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
         contentType : "application/json"
     ]
@@ -174,12 +182,16 @@ def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
         log.debug "updating plant for - ${expected_plant_name}"
         plant_put_params["path"] = "/api/v1/plants/${plant.key}"
         def plant_put_body_map = [
-			name: expected_plant_name
+            name: expected_plant_name
         ]
         def plant_put_body_json_builder = new JsonBuilder(plant_put_body_map)
         plant_put_params["body"] = plant_put_body_json_builder.toString()
-        httpPut(plant_put_params) { plant_put_response ->
-            parse_api_response(plant_put_response, 'updating plant name')
+        try {
+            httpPut(plant_put_params) { plant_put_response ->
+                parse_api_response(plant_put_response, 'updating plant name')
+            }
+        } catch (Exception e) {
+            log.debug "call failed $e"
         }
     }
 }
@@ -198,25 +210,29 @@ def moistureHandler(event){
                 contentType: "application/json",
                 body: event.value
         ]
-        httpPost(measurement_post_params) { measurement_post_response ->
-            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
-                    measurement_post_response.data.size() >0){
-                def measurement = measurement_post_response.data[0]
-                def plant =  measurement.plant
-                log.debug plant
-                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
-                plantlinksensors.each{ sensor_device ->
-                    if (sensor_device.id == event.deviceId){
-                        sensor_device.setStatusIcon(plant.status)
-                        if (plant.last_measurements && plant.last_measurements[0].moisture){
-                            sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
-                        }
-                        if (plant.last_measurements && plant.last_measurements[0].battery){
-                            sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
+        try {
+            httpPost(measurement_post_params) { measurement_post_response ->
+                if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
+                        measurement_post_response.data.size() >0){
+                    def measurement = measurement_post_response.data[0]
+                    def plant =  measurement.plant
+                    log.debug plant
+                    checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+                    plantlinksensors.each{ sensor_device ->
+                        if (sensor_device.id == event.deviceId){
+                            sensor_device.setStatusIcon(plant.status)
+                            if (plant.last_measurements && plant.last_measurements[0].moisture){
+                                sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
+                            }
+                            if (plant.last_measurements && plant.last_measurements[0].battery){
+                                sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
+                            }
                         }
                     }
                 }
             }
+        } catch (Exception e) {
+            log.debug "call failed $e"
         }
     }
 }
@@ -235,8 +251,12 @@ def batteryHandler(event){
                 contentType: "application/json",
                 body: event.value
         ]
-        httpPost(measurement_post_params) { measurement_post_response ->
-            parse_api_response(measurement_post_response, 'creating battery measurement')
+        try {
+            httpPost(measurement_post_params) { measurement_post_response ->
+                parse_api_response(measurement_post_response, 'creating battery measurement')
+            }
+        } catch (Exception e) {
+            log.debug "call failed $e"
         }
     }
 }
@@ -248,7 +268,7 @@ def getDeviceSerialFromEvent(event){
 }
 
 def oauthInitUrl(){
-	atomicState.oauthInitState = UUID.randomUUID().toString()
+    atomicState.oauthInitState = UUID.randomUUID().toString()
     def oauthParams = [
             response_type: "code",
             client_id: appSettings.client_id,
@@ -275,8 +295,12 @@ def swapToken(){
     ]
 
     def jsonMap
-    httpPost(postParams) { resp ->
-        jsonMap = resp.data
+    try {
+        httpPost(postParams) { resp ->
+            jsonMap = resp.data
+        }
+    } catch (Exception e) {
+        log.debug "call failed $e"
     }
 
     atomicState.refreshToken = jsonMap.refresh_token
@@ -287,33 +311,33 @@ def swapToken(){
 <head>
 <meta name="viewport" content="width=device-width, initial-scale=1">
 <style>
-	.container {
-		padding:25px;
-	}
-	.flex1 {
-    	width:33%;
-		float:left;
-		text-align: center;
-	}
-	p {
-		font-size: 2em;
-		font-family: Verdana, Geneva, sans-serif;
-		text-align: center;
-		color: #777;
-	}
+    .container {
+        padding:25px;
+    }
+    .flex1 {
+        width:33%;
+        float:left;
+        text-align: center;
+    }
+    p {
+        font-size: 2em;
+        font-family: Verdana, Geneva, sans-serif;
+        text-align: center;
+        color: #777;
+    }
 </style>
 </head>
 <body>
-	<div class="container">
-		<div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
-		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
-		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
-		<br clear="all">
+    <div class="container">
+        <div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
+        <div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
+        <div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
+        <br clear="all">
   </div>
   <div class="container">
-		<p>Your PlantLink Account is now connected to SmartThings!</p>
-		<p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
-	</div>
+        <p>Your PlantLink Account is now connected to SmartThings!</p>
+        <p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
+    </div>
 </body>
 </html>
 """

smartapps/schwark/hunter-douglas-platinum-gateway.src/hunter-douglas-platinum-gateway.groovy

@@ -1,347 +0,0 @@
-/**
- *  PlatinumGateway Service Manager
- *
- *  Author: Schwark Satyavolu
- *. nc -i3 <ip-address-of-gateway> 522 < input.txt > output.txt
- *
- */
-definition(
-    name: "Hunter Douglas Platinum Gateway",
-    namespace: "schwark",
-    author: "Schwark Satyavolu",
-    description: "Allows you to connect your Hunter Douglas Platinum Gateway shades with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your PlatinumGateway shades (tap the gear on PlatinumGateway tiles).",
-    category: "SmartThings Labs",
-    iconUrl: "https://lh5.ggpht.com/FN3-xG6R0q9VjJHYE1iK5K2J11rTphiDEePr8XluI6o_s52xfPoHwt0-TZxc0qlVSQ=w300",
-    iconX2Url: "https://lh5.ggpht.com/FN3-xG6R0q9VjJHYE1iK5K2J11rTphiDEePr8XluI6o_s52xfPoHwt0-TZxc0qlVSQ=w300",
-    singleInstance: true
-)
-
-preferences {
-	input("gatewayIP", "string", title:"Gateway IP Address", description: "Please enter your gateway's IP Address", required: true, displayDuringSetup: true)
-	input("statusURL", "string", title:"Gateway Status URL", description: "Please enter the URL to download status", required: true, displayDuringSetup: true)
-	input("scenePrefix", "string", title:"Scene Name Prefix", description: "Please choose a prefix to add to all the Scenes", required: false, displayDuringSetup: true, defaultValue: "Shade Scene " )
-	input("shadePrefix", "string", title:"Shade Name Prefix", description: "Please choose a prefix to add to all the Shades", required: false, displayDuringSetup: true, defaultValue: "Shade " )
-	input("wantShades", "bool", title:"Do you want to add each Shade as a Switch?", description: "Turning this on will add one switch for EACH shade in your house", required: false, displayDuringSetup: true, defaultValue: false )
-}
-
-def makeNetworkId(ipaddr, port) { 
-	String hexIp = ipaddr.tokenize('.').collect {String.format('%02X', it.toInteger()) }.join() 
-	String hexPort = String.format('%04X', port.toInteger()) 
-	log.debug "The target device is configured as: ${hexIp}:${hexPort}" 
-	return "${hexIp}:${hexPort}" 
-}
-
-/////////////////////////////////////
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def uninstalled() {
-	log.debug("Uninstalling with settings: ${settings}")
-	unschedule()
-	if(state.scenes) {
-		// remove scene child devices
-		state.scenes = [:]
-	}
-	if(state.shades) {
-		// remove window child devices
-		state.shades = [:]
-	}
-
-	removeChildDevices(getChildDevices())
-}
-
-/////////////////////////////////////
-def updated() {
-	//log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	initialize()
-}
-
-/////////////////////////////////////
-def initialize() {
-	// remove location subscription aftwards
-	unsubscribe()
-	state.subscribe = false
-	log.debug("gatewayIP is ${gatewayIP}")
-
-	if (gatewayIP) {
-		addgateway()
-	}
-
- 	runEvery5Minutes(doDeviceSync)
-}
-
-def getHubId() {
-	return state.hubId ? state.hubId : location.hubs[0].id
-}
-
-/////////////////////////////////////
-def addgateway() {
-	if(!state.gatewayHex) {
-		state.gatewayHex = makeNetworkId(gatewayIP,522)
-	}
-}
-
-
-/////////////////////////////////////
-def locationHandler(evt) {
-	log.debug "$locationHandler(evt.description)"
-	def description = evt.description
-	def hub = evt?.hubId
-	state.hubId = hub
-	log.debug("location handler: event description is ${description}")
-}
-
-/////////////////////////////////////
-private def parseEventMessage(Map event) {
-	//handles gateway attribute events
-	return event
-}
-
-private def parseEventMessage(String description) {
-}
-
-/////////////////////////////////////
-def doDeviceSync(){
-	log.debug "Doing Platinum Gateway Device Sync!"
-
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
-
-	if(statusURL) {
-		try {
-			
-    		httpGet(statusURL) { resp ->
-        		resp.headers.each {
-        			log.debug "${it.name} : ${it.value}"
-    			}
-    			log.debug "response contentType: ${resp.contentType}"
-    			//log.trace "response data: ${resp.data}"
-    			if(resp.status == 200) {
-    				state.statusText = resp.data
-    			}
-    		}
-    		
-		} catch (e) {
-    			log.error "something went wrong: $e"
-		}
-	}
-
-	updateStatus()
-}
-
-def processState(info) {
-  log.debug("processing state...")
-  def DB = ['rooms':[:], 'shades':[:], 'scenes':[:]]
-  def prefix = ""
-  //def lines = info.split(/[\n\r]+/)
-
-  info.eachLine() { line ->
-    line = line.trim()
-    if(!prefix) {
-      prefix = line[0..1]
-      log.debug("prefix is set to ${prefix}")
-    }
-    else if(!line.startsWith(prefix)) {
-      return
-    }
-    
-    line = line.drop(2)
-  	//log.trace("processing line ${line}")
-    if(line.startsWith("\$cr")) {
-      // name of room
-      def room_id = line[3..4]
-      def room_name = line.split('-')[-1].trim()
-      log.debug("found room with ${room_id} and ${room_name}")
-      DB['rooms'][room_id] = ['name':room_name, 'id':room_id, 'search':room_name.toLowerCase()]
-    } else if(line.startsWith("\$cm")) {
-      // name of scene
-      def scene_id = line[3..4]
-      def scene_name = line.split('-')[-1].trim()
-      log.debug("found scene with ${scene_id} and ${scene_name}")
-      DB['scenes'][scene_id] = ['name':scene_name, 'id':scene_id, 'search':scene_name.toLowerCase()]
-    } else if(line.startsWith("\$cs")) {
-      // name of a shade
-      def parts = line.split('-')
-      def shade_id = line[3..4]
-      def shade_name = parts[-1].trim()
-      def room_id = parts[1]
-      log.debug("found shade with ${shade_id} and ${shade_name}")
-      DB['shades'][shade_id] = ['name':shade_name, 'id':shade_id, 'search':shade_name.toLowerCase(), 'room': room_id]
-    } else if(line.startsWith("\$cp")) {
-      // state of a shade
-      def shade_id = line[3..4]
-      def stateTxt = line[-4..-2]
-      def state = stateTxt.toInteger()/255.0
-      log.debug("found shade state with ${shade_id} and ${state}")
-      def shade = DB['shades'][shade_id]
-      if(shade) {
-        DB['shades'][shade_id]['state'] = state
-      }
-    }
-   }
-
-    log.debug("DB is ${DB}")
-    return DB
-}
-
-
-
-////////////////////////////////////////////
-//CHILD DEVICE METHODS
-/////////////////////////////////////
-def parse(childDevice, description) {
-	def parsedEvent = parseEventMessage(description)
-
-	if (parsedEvent.headers && parsedEvent.body) {
-		def headerString = new String(parsedEvent.headers.decodeBase64())
-		def bodyString = new String(parsedEvent.body.decodeBase64())
-		log.debug "parse() - ${bodyString}"
-	} else {
-		log.debug "parse - got something other than headers,body..."
-		return []
-	}
-}
-
-def sendMessage(params) {
-	def newDNI = state.gatewayHex
-	if(newDNI) {
-		log.debug("sending ${params.msg} to ${newDNI}")
-		def ha = new physicalgraph.device.HubAction(params.msg,physicalgraph.device.Protocol.LAN, newDNI)
-		sendHubCommand(ha)
-	}
-}
-
-/////////////////////////////////////
-def runScene(sceneID) {
-	log.debug "Running Scene ${sceneID}"
-	sceneID = String.format('%02d',sceneID.toInteger())
-	def msg = "\$inm${sceneID}-"
-	sendMessage(["msg":msg])
-}
-
-def setShadeLevel(shadeNo, percent) {
-	log.debug "Setting Shade level on Shade ${shadeNo} to ${percent}%"
-	def shadeValue = 255 - (percent * 2.55).toInteger()
-	log.debug "Setting Shade level on Shade ${shadeNo} to ${shadeValue} value"
-	def msg = String.format("\$pss%s-04-%03d",shadeNo,shadeValue)
-	sendMessage(["msg":msg])
-	runIn(1, "sendMessage", [overwrite: false, data:["msg":"\$rls"]])
-}
-
-def updateScenes(DB) {
-	log.debug("Updating Scenes...")
-	if(!state.scenes) {
-		state.scenes = [:]
-	}
-	state.scenes.each() { id, sceneDevice ->
-		if(DB['scenes'][id]) {
-			// update device
-			if(DB['scenes'][id]['name'] != sceneDevice.label) {
-				log.debug("processing scene ${id} from name ${sceneDevice.label} to ${DB['scenes'][id]['name']}")
-				sceneDevice.sendEvent(name:'label', value: DB['scenes'][id]['name'], isStateChange: true)
-			}
-			DB['scenes'].remove(id)
-		} else {
-			// remove device
-			log.debug("removing scene ${id} from name ${sceneDevice.displayName}")
-			deleteChildDevice(sceneDevice.deviceNetworkId)
-		}
-	}
-	def namePrefix = scenePrefix
-	if(namePrefix) {
-		namePrefix = namePrefix.trim()+" "
-	}
-	DB['scenes']?.each() { id, sceneMap ->
-		def name = sceneMap['name']
-		log.debug("processing scene ${id} with name ${name}")
-		def PREFIX = "PLATINUMGATEWAYSCENE"
-		def hubId = getHubId()
-		def sceneDevice = addChildDevice("schwark", "Platinum Gateway Scene Switch", "${PREFIX}${id}", hubId, ["name": "PlatinumScene.${id}", "label": "${namePrefix}${name}", "completedSetup": true])
-		log.debug("created child device ${PREFIX}${id} for scene ${id} with name ${name} and hub ${hubId}")
-		sceneDevice.setSceneNo(id)
-		state.scenes[id] = sceneDevice
-	}
-}
-
-def updateShades(DB) {
-	if(!wantShades) return
-	log.debug("Updating Shades...")
-
-	if(!state.shades) {
-		state.shades = [:]
-	}
-	state.shades.each() { id, shadeDevice ->
-		if(DB['shades'][id]) {
-			// update device
-			if(DB['shades'][id]['name'] != shadeDevice.label) {
-				log.debug("processing shade rename ${id} from name ${shadeDevice.label} to ${DB['shades'][id]['name']}")
-				shadeDevice.sendEvent(name:'label', value: DB['shades'][id]['name'], isStateChange: true)
-			}
-			DB['shades'].remove(id)
-		} else {
-			// remove device
-			log.debug("removing shade ${id} from name ${shadeDevice.displayName}")
-			deleteChildDevice(shadeDevice.deviceNetworkId)
-		}
-	}
-	def namePrefix = shadePrefix
-	if(namePrefix) {
-		namePrefix = namePrefix.trim()+" "
-	}
-	DB['shades']?.each() { id, shadeMap ->
-		def name = shadeMap['name']
-		log.debug("processing shade ${id} with name ${name}")
-		def PREFIX = "PLATINUMGATEWAYSHADE"
-		def hubId = getHubId()
-		def shadeDevice = addChildDevice("schwark", "Platinum Gateway Shade Switch", "${PREFIX}${id}", hubId, ["name": "PlatinumShade.${id}", "label": "${namePrefix}${name}", "completedSetup": true])
-		log.debug("created child device ${PREFIX}${id} for shade ${id} with name ${name} and hub ${hubId}")
-		shadeDevice.setShadeNo(id)
-		state.shades[id] = shadeDevice
-	}
-}
-
-def updateStatus() {
-	if(!state.statusText) {
-		log.debug("statusText is empty - ${state.statusText}.")
-		return
-	}
-	log.debug ("Updating status")
-
-	def DB = processState(state.statusText)
-	updateScenes(DB)
-	updateShades(DB)
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
-private Boolean canInstallLabs()
-{
-	return hasAllHubsOver("000.011.00603")
-}
-
-private Boolean hasAllHubsOver(String desiredFirmware)
-{
-	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
-}
-
-private List getRealHubFirmwareVersions()
-{
-	return location.hubs*.firmwareVersionString.findAll { it }
-}
-
-private removeChildDevices(data) {
-    data.delete.each {
-        deleteChildDevice(it.deviceNetworkId)
-    }
-}