Merge pull request #1653 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy

@@ -1,145 +0,0 @@
-/**
- *  Aeon Motor Controller
- *
- *  Copyright 2015 Bruce Ravenel
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Aeon Motor Controller", namespace: "bravenel", author: "Bruce Ravenel") {
-		capability "Refresh"
-		capability "Actuator"
-        capability "doorControl"
-        capability "Switch"
-
-        command "up"
-        command "down"
-        command "stop"
-
-//		fingerprint inClusters: "0x26,0x32"
-	}
-
-	simulator {
-        status "up":   "command: 2604, payload: FF"
-        status "down": "command: 2604, payload: 00"
-        status "stop": "command: 2605, payload: FE"
-
-		["FF", "FE", "00"].each { val ->
-			reply "2001$val,delay 100,2602": "command: 2603, payload: $val"
-		}
-	}
-
-	tiles {
-		standardTile("motor", "device.motor", width: 2, height: 2) {
-			state("stopUp", label:'stop', icon:"st.doors.garage.garage-open", action: 'down', backgroundColor:"#79b821")
-			state("stopDn", label:'stop', icon:"st.doors.garage.garage-closed", action: 'up', backgroundColor:"#79b821")
-			state("up", label:'up', icon:"st.doors.garage.garage-opening", action:'stop', backgroundColor:"#ffe71e")
-			state("down", label:'down', icon:"st.doors.garage.garage-closing", action:'stop', backgroundColor:"#ffe71e")
-		}
-		valueTile("energy", "device.energy", decoration: "flat") {
-			state "default", label:' '
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-        standardTile("stop", "device.switch") {
-        	state "default", label:"", action: "stop", icon:"http://cdn.device-icons.smartthings.com/sonos/stop-btn@2x.png"
-        }
-        standardTile("up", "device.switch") {
-        	state "default", label: "Up", action: "up", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-up@2x.png"
-        }
-        standardTile("down", "device.switch") {
-        	state "default", label: "Down", action: "down", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-down@2x.png"
-        }
-	}
-	main(["motor"])
-	details(["motor",  "refresh", "energy", "up", "down", "stop",])
-}
-
-// parse events into attributes
-def parse(String description) {
-	def result = []
-	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])
-	if (cmd) {
-		result = zwaveEvent(cmd)
-		log.debug("'$description' parsed to $result")
-	} else {
-		log.debug("Couldn't zwave.parse '$description'")
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	motorEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	motorEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
-	motorEvents(cmd)
-}
-
-def motorEvents(physicalgraph.zwave.Command cmd) {
-	def result = []
-    def switchEvent = []
-    if(cmd.value == 0) {switchEvent = createEvent(name: "motor", value: "down", descriptionText: text)}
-    else if(cmd.value == 254) {
-    	def stopVal = state.up ? "stopUp" : "stopDn"
-    	switchEvent = createEvent(name: "motor", value: stopVal, descriptionText: text)
-    }
-    else if(cmd.value == 255) {switchEvent = createEvent(name: "motor", value: "up", descriptionText: text)}
-	result << switchEvent
-}
-
-def refresh() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def up() {
-	state.up = true
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def down() {
-	state.up = false
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def stop() {
-	delayBetween([
-    	zwave.switchMultilevelV1.switchMultilevelStopLevelChange().format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def on() {
-	state.up = true
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def off() {
-	state.up = false
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -40,11 +40,14 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	def resMap
-	if (description.startsWith("zone")) {
-		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
+	def name = null
+	def value = description
+	if (zigbee.isZoneType19(description)) {
+		name = "contact"
+		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
 	}
 	
-	log.debug "Parse returned $resMap"
-	return resMap
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -88,7 +88,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = [:]
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -45,7 +45,7 @@ metadata {
 
 def parse(String description) {
 	def results = [:]
-	if (description.startsWith("zone") || !isSupportedDescription(description)) {
+	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -87,12 +87,16 @@ private String parseName(String description) {
 }
 
 private String parseValue(String description) {
-	def zs = zigbee.parseZoneStatus(description)
-	if (zs) {
-		zs.isAlarm1Set() ? "active" : "inactive"
-	} else {
-		description
+	if (isZoneType19(description)) {
+		if (translateStatusZoneType19(description)) {
+			return "active"
+		}
+		else {
+			return "inactive"
+		}
 	}
+
+	description
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,7 +488,12 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
+	else if (zigbee.translateStatusZoneType19(description)) {
+		return "open"
+	}
+	else {
+		return "closed"
+	}
 }
 
 private parseDescriptionText(String linkText, String value, String description) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results
 
-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -118,38 +118,15 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
     def buttonState = ""
     def buttonNumber = 0
-    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
             getButtonResult("press")
         }
-        else if (descMap.commandInt == 0) {
+        else if (descMap.command == "00") {
             getButtonResult("release")
         }
     }
-    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
-            getButtonResult("press")
-        }
-        else if (descMap.commandInt == 0) {
-            def button = 1
-            switch(descMap.sourceEndpoint) {
-                case "01":
-                    button = 4
-                    break
-                case "02":
-                    button = 3
-                    break
-                case "03":
-                    button = 1
-                    break
-                case "04":
-                    button = 2
-                    break
-            }
-        
-            getButtonResult("release", button)
-        }
-    }
     else if (descMap.clusterInt == 0x0006) {
         buttonState = "pushed"
         if (descMap.command == "01") {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -97,7 +97,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    zigbee.setLevel(value) + (value?.toInteger() > 0 ? zigbee.on() : [])
 }
 
 /**

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -23,6 +23,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15S", deviceJoinName: "Leviton Lumina RF Switch"
     }
 
     // simulator metadata

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -51,7 +51,7 @@ definition(
 
 //Device Inputs
 preferences {
-	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
+	section("Allow OpenT2T to control these things...") {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
@@ -329,34 +329,38 @@ private getDeviceType(device) {
 		switch (it.name.toLowerCase()) {
 			case "switch":
 				deviceType = "switch"
-				break
-			case "switch level":
-				deviceType = "light"
+				if (caps.any { it.name.toLowerCase() == "power meter" }) {
+					return deviceType
+				}
+				if (caps.any { it.name.toLowerCase() == "switch level" }) {
+					deviceType = "light"
+					return deviceType
+				}
 				break
 			case "contact sensor":
 				deviceType = "contactSensor"
-				break
+				return deviceType
 			case "garageDoorControl":
 				deviceType = "garageDoor"
-				break
+				return deviceType
 			case "lock":
 				deviceType = "lock"
-				break
+				return deviceType
 			case "video camera":
 				deviceType = "camera"
-				break
+				return deviceType
 			case "motion sensor":
 				deviceType = "motionSensor"
-				break
+				return deviceType
 			case "presence sensor":
 				deviceType = "presenceSensor"
-				break
+				return deviceType
 			case "thermostat":
 				deviceType = "thermostat"
-				break
+				return deviceType
 			case "water sensor":
 				deviceType = "waterSensor"
-				break
+				return deviceType
 			default:
 				break
 		}