test: test

2026-03-09 05:11:52 +00:00 · 2017-02-01 14:46:54 -08:00
54 changed files with 1636 additions and 851 deletions
--- a/devicetypes/danlwelch/zooz-4-in-1.src/zooz-4-in-1.groovy
+++ b/devicetypes/danlwelch/zooz-4-in-1.src/zooz-4-in-1.groovy
@@ -1,68 +0,0 @@
-/**
- *  Zooz 4-in-1
- *
- *  Copyright 2017 Dan Welch
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Zooz 4-in-1", namespace: "Danlwelch", author: "Dan Welch") {
-		capability "Illuminance Measurement"
-		capability "Light"
-		capability "Light"
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-
-		attribute "Humidity", "string"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'illuminance' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'motion' attribute
-	// TODO: handle 'temperature' attribute
-	// TODO: handle 'Humidity' attribute
-
-}
-
-// handle commands
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
--- a/devicetypes/gouldner/stateless-on-off-button-tile.src/stateless-on-off-button-tile.groovy
+++ b/devicetypes/gouldner/stateless-on-off-button-tile.src/stateless-on-off-button-tile.groovy
@@ -0,0 +1,46 @@
+/**
+ *  Stateless On/Off Button Tile
+ *
+ *  Author: Ronald Gouldner
+ *
+ *  Date: 2015-05-14
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Stateless On-Off Button Tile", namespace: "gouldner", author: "Ronald Gouldner") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Sensor"
+	}
+
+	// simulator metadata
+	simulator {
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "offReady", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "onReady"
+			state "onReady", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "offReady"
+			state "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+		main "button"
+		details "button"
+	}
+}
+
+def parse(String description) {
+}
+
+def on() {
+    log.debug "Stateless On/Off Button Tile Virtual Switch ${device.name} turned on"
+    sendEvent(name: "switch", value: "on")
+    sendEvent(name: "switch", value: "onReady")
+}
+
+def off() {
+    log.debug "Stateless On/Off Button Tile Virtual Switch ${device.name} turned off"
+    sendEvent(name: "switch", value: "off")
+    sendEvent(name: "switch", value: "offReady")
+}
--- a/devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy
+++ b/devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy
@@ -11,6 +11,7 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
+ 
 metadata {
    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
        capability "Tone"
@@ -59,7 +60,7 @@ def updated() {
 }

 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
    log.debug "configure -- cmds: ${cmds}"
    return cmds
 }
--- a/devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy
+++ b/devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy
@@ -23,7 +23,6 @@ metadata {
        capability "Switch"
        capability "Switch Level"
        capability "Health Check"
-        capability "Light"

        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
    }
--- a/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
+++ b/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"

 		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
 		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
--- a/devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy
+++ b/devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy
@@ -58,7 +58,7 @@ metadata {
 }

 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }

 // parse events into attributes
--- a/devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy
+++ b/devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy
@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"

 		attribute "networkAddress", "string"
@@ -46,7 +45,7 @@ metadata {
 }

 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }

 // parse events into attributes
--- a/devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy
+++ b/devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy
@@ -67,7 +67,7 @@ metadata {
 }

 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }

 // parse events into attributes
--- a/devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy
+++ b/devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy
@@ -51,7 +51,7 @@ metadata {
 }

 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }

 // parse events into attributes
--- a/devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy
+++ b/devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy
@@ -56,7 +56,7 @@ metadata {
 }

 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }

 // parse events into attributes
--- a/devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy
+++ b/devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy
@@ -14,7 +14,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}

 	simulator {
--- a/devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy
+++ b/devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy
@@ -13,7 +13,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 	}

 	simulator {
--- a/devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy
+++ b/devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy
@@ -36,7 +36,6 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
-		capability "Light"

 		attribute "powered", "string"

--- a/devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy
+++ b/devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy
@@ -40,11 +40,14 @@ metadata {

 // Parse incoming device messages to generate events
 def parse(String description) {
-	def resMap
-	if (description.startsWith("zone")) {
-		resMap = createEvent(name: "contact", value: zigbee.parseZoneStatus(description).isAlarm1Set() ? "open" : "closed")
+	def name = null
+	def value = description
+	if (zigbee.isZoneType19(description)) {
+		name = "contact"
+		value = zigbee.translateStatusZoneType19(description) ? "open" : "closed"
 	}
 	
-	log.debug "Parse returned $resMap"
-	return resMap
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }
--- a/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy
@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"

 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"

@@ -70,36 +69,292 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"

-	def event = zigbee.getEvent(description)
-	if (!event) {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	} else if (event.name == "power") {
-		/*
-			Dividing by 10 as the Divisor is 10000 and unit is kW for the device. Simplifying to 10 power level is an integer.
-		*/
-		event.value = event.value / 10
-	}
+	def event = [:]
+	def finalResult = isKnownDescription(description)
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+			event = null
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			event = createEvent(name: "power", value: powerValue)

-	return event ? createEvent(event) : event
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			event = createEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+	return event
 }

-def setLevel(value) {
-	zigbee.setLevel(value)
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"
 }

 def off() {
-	zigbee.off()
+	zigbeeCommand("6", "0")
 }

 def on() {
-	zigbee.on()
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		if (device.latestValue("switch") == "off") {
+			sendEvent(name: "switch", value: "on")
+		}
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000")		//value is between 0 to 100
+	}
 }

 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.electricMeasurementPowerRefresh()
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 2000",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0B04 0x050B", "delay 2000"
+	]
+
 }

 def configure() {
-	refresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.electricMeasurementPowerConfig()
+	refresh() + onOffConfig() + levelConfig() + powerConfig()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return [:]
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return [:]
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return [:]
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+	}
+	else {
+		return [:]
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 2000",
+			"zcl global send-me-a-report 8 0 0x20 5 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	[
+			"st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}",
+			"delay 2000"
+	]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
 }
--- a/devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy
+++ b/devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy
@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"

 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}
--- a/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
@@ -13,9 +13,10 @@
 *  License for the specific language governing permissions and limitations
 *  under the License.
 */
+
 metadata {
 	// Automatically generated. Make future change here.
-	definition(name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -23,12 +24,10 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
-		capability "Outlet"

-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}

@@ -46,32 +45,32 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
-					"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
 		}
 	}

 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
-			tileAttribute("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label: '${currentValue} W'
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
 			}
 		}

 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		main "switch"
-		details(["switch", "refresh"])
+		details(["switch","refresh"])
 	}
 }

@@ -79,33 +78,52 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"

-	def event = zigbee.getEvent(description)
+	def finalResult = zigbee.getKnownDescription(description)
+	def event = [:]

-	if (event) {
-		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
-		} else if (event.name == "switch") {
-			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
-			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info "final result = $finalResult"
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+			event = null
 		}
-	} else {
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			event = createEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			event = createEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
 		def cluster = zigbee.parse(description)

-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
 			if (cluster.data[0] == 0x00) {
 				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
 				event = createEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
+			}
+			else {
 				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
 				event = null
 			}
-		} else {
+		}
+		else {
 			log.warn "DID NOT PARSE MESSAGE for description : $description"
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }

 def off() {
@@ -132,6 +150,43 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + zigbee.electricMeasurementPowerConfig()
+	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
 }

+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 2000",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}
--- a/devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy
+++ b/devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy
@@ -88,7 +88,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = [:]

-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}
--- a/devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy
+++ b/devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy
@@ -117,7 +117,7 @@ def parse(String description) {
 	log.debug "parse($description)"
 	def results = null

-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}
--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus


 metadata {
-	definition(name: "SmartSense Moisture Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -43,10 +43,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
-					"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
-			])
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -55,32 +55,32 @@ metadata {
 	}

 	tiles(scale: 2) {
-		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
+		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

-		main(["water", "temperature"])
+		main (["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
@@ -88,43 +88,117 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"

-	// getEvent will handle temperature and humidity
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}

 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]

 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }

+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
+
+            case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)

 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }

+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -165,18 +239,40 @@ private Map getBatteryResult(rawValue) {
 	return result
 }

+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMoistureResult(value) {
 	log.debug "water"
-	def descriptionText
-	if (value == "wet")
-		descriptionText = '{{ device.displayName }} is wet'
-	else
-		descriptionText = '{{ device.displayName }} is dry'
+    def descriptionText
+    if ( value == "wet" )
+    	descriptionText = '{{ device.displayName }} is wet'
+    else
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
-			name           : 'water',
-			value          : value,
-			descriptionText: descriptionText,
-			translatable   : true
+		name: 'water',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }

@@ -189,10 +285,12 @@ def ping() {

 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+	]

-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }

 def configure() {
@@ -204,3 +302,42 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus


 metadata {
-	definition(name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -45,10 +45,10 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
-					"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -57,30 +57,30 @@ metadata {
 	}

 	tiles(scale: 2) {
-		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°', unit: "F",
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		main(["motion", "temperature"])
@@ -90,40 +90,116 @@ metadata {

 def parse(String description) {
 	log.debug "description: $description"
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else if (descMap.clusterInt == 0x0406 && descMap.attrInt == 0x0000) {
-				def value = descMap.value.endsWith("01") ? "active" : "inactive"
-				log.warn "Doing a read attr motion event"
-				resultMap = getMotionResult(value)
-			}
-		}
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}

 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]

 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
 	return result
 }

+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+				break
+
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
+
+			case 0x0406:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					log.debug 'motion'
+					resultMap.name = 'motion'
+				}
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)

@@ -131,6 +207,15 @@ private Map parseIasMessage(String description) {
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }

+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+	} else {
+		return Math.round(celsiusToFahrenheit(celsius))
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
 	def linkText = getLinkText(device)
@@ -170,14 +255,36 @@ private Map getBatteryResult(rawValue) {
 	return result
 }

+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
 	return [
-			name           : 'motion',
-			value          : value,
-			descriptionText: descriptionText,
-			translatable   : true
+		name: 'motion',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }

@@ -185,16 +292,17 @@ private Map getMotionResult(value) {
 * PING is used by Device-Watch in attempt to reach the Device
 * */
 def ping() {
-	return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }

 def refresh() {
 	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+	]

-	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
-
-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }

 def configure() {
@@ -206,3 +314,42 @@ def configure() {
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}
--- a/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
+++ b/devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy
@@ -45,7 +45,7 @@ metadata {

 def parse(String description) {
 	def results = [:]
-	if (description.startsWith("zone") || !isSupportedDescription(description)) {
+	if (isZoneType19(description) || !isSupportedDescription(description)) {
 		results = parseBasicMessage(description)
 	}
 	else if (isMotionStatusMessage(description)){
@@ -87,12 +87,16 @@ private String parseName(String description) {
 }

 private String parseValue(String description) {
-	def zs = zigbee.parseZoneStatus(description)
-	if (zs) {
-		zs.isAlarm1Set() ? "active" : "inactive"
-	} else {
-		description
+	if (isZoneType19(description)) {
+		if (translateStatusZoneType19(description)) {
+			return "active"
+		}
+		else {
+			return "inactive"
+		}
 	}
+
+	description
 }

 private parseDescriptionText(String linkText, String value, String description) {
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -14,23 +14,22 @@
 *  under the License.
 */
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-import physicalgraph.zigbee.zcl.DataType

 metadata {
-	definition(name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {

 		capability "Three Axis"
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Contact Sensor"
-		capability "Acceleration Sensor"
-		capability "Refresh"
-		capability "Temperature Measurement"
+ 		capability "Contact Sensor"
+ 		capability "Acceleration Sensor"
+ 		capability "Refresh"
+ 		capability "Temperature Measurement"
 		capability "Health Check"

-		command "enrollResponse"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
+ 		command "enrollResponse"
+ 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
@@ -58,11 +57,11 @@ metadata {
 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
-					"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
-					"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
-			])
+				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+				])
 		}
 		section {
 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
@@ -74,170 +73,211 @@ metadata {
 	}

 	tiles(scale: 2) {
-		multiAttributeTile(name: "status", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
-				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
-				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e")
-			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821")
+			state("open", label:'Open', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'Closed', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("active", label:'Active', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'Inactive', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state("temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 			)
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}


 		main(["status", "acceleration", "temperature"])
 		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
-}
+ }

 def parse(String description) {
-	def maps = []
-	maps << zigbee.getEvent(description)
-	if (!maps[0]) {
-		maps = []
-		if (description?.startsWith('zone status')) {
-			maps += parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				maps << getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			} else {
-
-				maps += handleAcceleration(descMap)
-			}
-		}
-	} else if (maps[0].name == "temperature") {
-		def map = maps[0]
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
 	}

-	def result = maps.inject([]) {acc, it ->
-		if (it) {
-			acc << createEvent(it)
-		}
-	}
+	def result = map ? createEvent(map) : [:]
+
 	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
+		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
 	return result
 }

-private List<Map> handleAcceleration(descMap) {
-	def result = []
-	if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0010) {
-		def value = descMap.value == "01" ? "active" : "inactive"
-		log.debug "Acceleration $value"
-		result << [
-				name           : "acceleration",
-				value          : value,
-				descriptionText: "{{ device.displayName }} was $value",
-				isStateChange  : isStateChange(device, "acceleration", value),
-				translatable   : true
-		]
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+			break

-		if (descMap.additionalAttrs) {
-			result += parseAxis(descMap.additionalAttrs)
+			case 0xFC02:
+				log.debug 'ACCELERATION'
+			break
+
+			case 0x0402:
+				if (cluster.command == 0x07) {
+					if(cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+			break
 		}
-	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
-		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
-		result += parseAxis(addAttrs)
 	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private List parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+
+	List result = []
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		result << getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+		result << getAccelerationResult(descMap.value)
+	}
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
 	return result
 }

-private List<Map> parseAxis(List<Map> attrData) {
-	def results = []
-	def x = hexToSignedInt(attrData.find { it.attrInt == 0x0012 }?.value)
-	def y = hexToSignedInt(attrData.find { it.attrInt == 0x0013 }?.value)
-	def z = hexToSignedInt(attrData.find { it.attrInt == 0x0014 }?.value)
-
-	def xyzResults = [:]
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
-	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
 	}
-
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		results += garageEvent(xyzResults.z)
-
-	def value = "${xyzResults.x},${xyzResults.y},${xyzResults.z}"
-	results << [
-			name           : "threeAxis",
-			value          : value,
-			linkText       : getLinkText(device),
-			descriptionText: "${getLinkText(device)} was ${value}",
-			handlerName    : name,
-			isStateChange  : isStateChange(device, "threeAxis", value),
-			displayed      : false
-	]
-	results
+	return resultMap
 }

-private List<Map> parseIasMessage(String description) {
+private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	List<Map> results = []
+	Map resultMap = [:]

-	if (garageSensor != "Yes") {
-		def value = zs.isAlarm1Set() ? 'open' : 'closed'
-		log.debug "Contact: ${device.displayName} value = ${value}"
-		def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-		results << [name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true]
-		results << [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
-	}
+			if (garageSensor != "Yes"){
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+			}

-	return results
+	return resultMap
 }

+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
+		}
+	}
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return Math.round(celsius)
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
+	}
+
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"

@@ -276,24 +316,54 @@ private Map getBatteryResult(rawValue) {
 	return result
 }

-List<Map> garageEvent(zValue) {
-	List<Map> results = []
-	def absValue = zValue.abs()
-	def contactValue = null
-	def garageValue = null
-	if (absValue > 900) {
-		contactValue = 'closed'
-		garageValue = 'garage-closed'
-	} else if (absValue < 100) {
-		contactValue = 'open'
-		garageValue = 'garage-open'
+private Map getTemperatureResult(value) {
+	log.debug "Temperature"
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
 	}
-	if (contactValue != null) {
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
-		results << [name: 'contact', value: contactValue, descriptionText: descriptionText, displayed: false, translatable: true]
-		results << [name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true]
-	}
-	results
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		translatable: true,
+		unit: temperatureScale
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug "Contact: ${device.displayName} value = ${value}"
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration"
+	def name = "acceleration"
+    def value
+    def descriptionText
+
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
+	]
 }

 /**
@@ -306,21 +376,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Values "

-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
-
-	return refreshCmds
-}
-
-def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting"
-	def configCmds = []
+	def refreshCmds = []

 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
@@ -329,45 +385,81 @@ def configure() {
            Separating these out in a separate if-else because I do not want to touch Centralite part
            as of now.
        */
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
 	} else {
-		// Write a motion threshold of 2 * .063g = .126g
-		// Currently due to a Centralite firmware issue, this will cause a read attribute response that
-		// indicates acceleration even when there isn't.
-		configCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
 	}

+	//Common refresh commands
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020) +
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	log.debug "Configuring Reporting"
+
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	configCmds += zigbee.batteryConfig() +
+	def configCmds = zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
-			zigbee.configureReporting(0xFC02, 0x0010, DataType.BITMAP8, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, DataType.INT16, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])

 	return refresh() + configCmds
 }

-def updated() {
-	log.debug "updated called"
-	log.info "garage value : $garageSensor"
-	if (garageSensor == "Yes") {
-		def descriptionText = "Updating device to garage sensor"
-		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
-		} else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
-		}
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+	]
+}
+
+private Map parseAxis(String description) {
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
 	} else {
-		def descriptionText = "Updating device to open/close sensor"
-		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
-		} else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
-		}
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
+		// This may change in the future
+		xyzResults.x = z
+		xyzResults.y = x
+		xyzResults.z = y
 	}
+
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		garageEvent(xyzResults.z)
+
+	getXyzResult(xyzResults, description)
 }

 private hexToSignedInt(hexVal) {
@@ -375,6 +467,44 @@ private hexToSignedInt(hexVal) {
 	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
 }

+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+	}
+}
+
+private Map getXyzResult(results, description) {
+	def name = "threeAxis"
+	def value = "${results.x},${results.y},${results.z}"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		displayed: false
+	]
+}
+
 private getManufacturerCode() {
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		return "0x110A"
@@ -386,3 +516,25 @@ private getManufacturerCode() {
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}
--- a/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
+++ b/devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy
@@ -86,7 +86,7 @@ metadata {
 def parse(String description) {
 	def results

-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		results = parseSingleMessage(description)
 	}
 	else if (description == 'updated') {
@@ -488,7 +488,12 @@ private String parseValue(String description) {
 	if (!isSupportedDescription(description)) {
 		return description
 	}
-	return zigbee.parseZoneStatus(description)?.isAlarm1Set() ? "open" : "closed"
+	else if (zigbee.translateStatusZoneType19(description)) {
+		return "open"
+	}
+	else {
+		return "closed"
+	}
 }

 private parseDescriptionText(String linkText, String value, String description) {
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus

 metadata {
-	definition(name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -43,77 +43,155 @@ metadata {
 	}

 	tiles(scale: 2) {
-		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}

 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery', unit: ""
+			state "battery", label:'${currentValue}% battery', unit:""
 		}

 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

-		main(["contact", "temperature"])
-		details(["contact", "temperature", "battery", "refresh"])
+		main (["contact", "temperature"])
+		details(["contact","temperature","battery","refresh"])
 	}
 }

 def parse(String description) {
 	log.debug "description: $description"

-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
 	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }

 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : [:]

-	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }

+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+                break
+
+            case 0x0402:
+				if (cluster.command == 0x07){
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}

 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }

+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
@@ -126,8 +204,8 @@ private Map getBatteryResult(rawValue) {
 		def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 		result.name = 'battery'
@@ -136,14 +214,31 @@ private Map getBatteryResult(rawValue) {
 	return result
 }

+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
 private Map getContactResult(value) {
 	log.debug 'Contact Status'
 	def linkText = getLinkText(device)
 	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
 	return [
-			name           : 'contact',
-			value          : value,
-			descriptionText: descriptionText
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
 	]
 }

@@ -156,10 +251,12 @@ def ping() {

 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+	def refreshCmds = [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 2000",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 2000"
+	]

-	return refreshCmds + zigbee.enrollResponse()
+	return refreshCmds + enrollResponse()
 }

 def configure() {
@@ -171,5 +268,44 @@ def configure() {

 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }
--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -13,10 +13,8 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType
-
 metadata {
-	definition(name: "SmartSense Temp/Humidity Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -33,7 +31,7 @@ metadata {
 		status 'H 45': 'catchall: 0104 FC45 01 01 0140 00 D9B9 00 04 C2DF 0A 01 0000218911'
 		status 'H 57': 'catchall: 0104 FC45 01 01 0140 00 4E55 00 04 C2DF 0A 01 0000211316'
 		status 'H 53': 'catchall: 0104 FC45 01 01 0140 00 20CD 00 04 C2DF 0A 01 0000219814'
-		status 'H 43': 'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
+		status 'H 43':  'read attr - raw: BF7601FC450C00000021A410, dni: BF76, endpoint: 01, cluster: FC45, size: 0C, attrId: 0000, result: success, encoding: 21, value: 10a4'
 	}

 	preferences {
@@ -42,28 +40,28 @@ metadata {
 	}

 	tiles(scale: 2) {
-		multiAttributeTile(name: "temperature", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState "temperature", label: '${currentValue}°',
-						backgroundColors: [
-								[value: 31, color: "#153591"],
-								[value: 44, color: "#1e9cbb"],
-								[value: 59, color: "#90d2a7"],
-								[value: 74, color: "#44b621"],
-								[value: 84, color: "#f1d801"],
-								[value: 95, color: "#d04e00"],
-								[value: 96, color: "#bc2323"]
-						]
+		multiAttributeTile(name:"temperature", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState "temperature", label:'${currentValue}°',
+					backgroundColors:[
+						[value: 31, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 95, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+					]
 			}
 		}
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label: '${currentValue}% humidity', unit: ""
+			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: '${currentValue}% battery'
+			state "battery", label:'${currentValue}% battery'
 		}
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		main "temperature", "humidity"
@@ -74,31 +72,142 @@ metadata {
 def parse(String description) {
 	log.debug "description: $description"

-	// getEvent will handle temperature and humidity
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		Map descMap = zigbee.parseDescriptionAsMap(description)
-		if (descMap.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-			map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-		} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-			if (descMap.data[0] == "00") {
-				log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			} else {
-				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-			}
-		}
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
 	}

 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : [:]
 }

+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
+                break
+
+            case 0x0402:
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
+
+			case 0xFC45:
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+					resultMap = getHumidityResult(display)
+				}
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "FC45" && descMap.attrId == "0000") {
+		def value = getReportAttributeHumidity(descMap.value)
+		resultMap = getHumidityResult(value)
+	}
+
+	return resultMap
+}
+
+def getReportAttributeHumidity(String value) {
+    def humidity = null
+    if (value?.trim()) {
+        try {
+        	// value is hex with no decimal
+            def pct = Integer.parseInt(value.trim(), 16) / 100
+            humidity = String.format('%.0f', pct)
+        } catch(NumberFormatException nfe) {
+            log.debug "Error converting $value to humidity"
+        }
+    }
+    return humidity
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	else if (description?.startsWith('humidity: ')) {
+		def pct = (description - "humidity: " - "%").trim()
+		if (pct.isNumber()) {
+			def value = Math.round(new BigDecimal(pct)).toString()
+			resultMap = getHumidityResult(value)
+		} else {
+			log.error "invalid humidity: ${pct}"
+		}
+	}
+	return resultMap
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)

-  def result = [:]
+    def result = [:]

 	def volts = rawValue / 10
 	if (!(rawValue == 0 || rawValue == 255)) {
@@ -117,22 +226,41 @@ private Map getBatteryResult(rawValue) {
 	return result
 }

+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getHumidityResult(value) {
+	log.debug 'Humidity'
+	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+}
+
 /**
 * PING is used by Device-Watch in attempt to reach the Device
 * */
 def ping() {
-	return zigbee.readAttribute(0x0001, 0x0020) // Read the Battery Level
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }

-def refresh() {
+def refresh()
+{
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020)
 }

 def configure() {
@@ -141,8 +269,35 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

 	log.debug "Configuring Reporting and Bindings."
+	def humidityConfigCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 2000",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 2000"
+	]

 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }
--- a/devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy
+++ b/devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy
@@ -96,7 +96,7 @@ metadata {
 def parse(String description) {
 	def results

-	if (!isSupportedDescription(description) || description.startsWith("zone")) {
+	if (!isSupportedDescription(description) || zigbee.isZoneType19(description)) {
 		// Ignore this in favor of orientation-based state
 		// results = parseSingleMessage(description)
 	}
--- a/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
+++ b/devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy
@@ -13,7 +13,6 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
@@ -83,7 +82,7 @@ def parse(String description) {
        def result = event ? createEvent(event) : []

        if (description?.startsWith('enroll request')) {
-            List cmds = zigbee.enrollResponse()
+            List cmds = enrollResponse()
            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
        }
        return result
@@ -118,38 +117,15 @@ private Map getBatteryResult(rawValue) {
 private Map parseNonIasButtonMessage(Map descMap){
    def buttonState = ""
    def buttonNumber = 0
-    if ((device.getDataValue("model") == "3460-L") &&(descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
            getButtonResult("press")
        }
-        else if (descMap.commandInt == 0) {
+        else if (descMap.command == "00") {
            getButtonResult("release")
        }
    }
-    else if ((device.getDataValue("model") == "3450-L") && (descMap.clusterInt == 0x0006)) {
-        if (descMap.commandInt == 1) {
-            getButtonResult("press")
-        }
-        else if (descMap.commandInt == 0) {
-            def button = 1
-            switch(descMap.sourceEndpoint) {
-                case "01":
-                    button = 4
-                    break
-                case "02":
-                    button = 3
-                    break
-                case "03":
-                    button = 1
-                    break
-                case "04":
-                    button = 2
-                    break
-            }
-        
-            getButtonResult("release", button)
-        }
-    }
    else if (descMap.clusterInt == 0x0006) {
        buttonState = "pushed"
        if (descMap.command == "01") {
@@ -184,7 +160,7 @@ private Map parseNonIasButtonMessage(Map descMap){
 def refresh() {
    log.debug "Refreshing Battery"

-    return zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+    return zigbee.readAttribute(0x0001, 0x20) +
            zigbee.enrollResponse()
 }

@@ -201,9 +177,9 @@ def configure() {
    }
    return zigbee.onOffConfig() +
            zigbee.levelConfig() +
-            zigbee.configureReporting(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20, DataType.UINT8, 30, 21600, 0x01) +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
            zigbee.enrollResponse() +
-            zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x20) +
+            zigbee.readAttribute(0x0001, 0x20) +
            cmds

 }
--- a/devicetypes/smartthings/zigbee-dimmer-power.src/README.md
+++ b/devicetypes/smartthings/zigbee-dimmer-power.src/README.md
@@ -23,7 +23,6 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
-* **Light** - indicates that the device belongs to Light category.

 ## Device Health

--- a/devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy
@@ -22,7 +22,6 @@ metadata {
        capability "Switch"
        capability "Switch Level"
        capability "Health Check"
-        capability "Light"

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
@@ -98,7 +97,7 @@ def on() {
 }

 def setLevel(value) {
-    zigbee.setLevel(value) + (value?.toInteger() > 0 ? zigbee.on() : [])
+    zigbee.setLevel(value)
 }

 /**
--- a/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
@@ -20,7 +20,6 @@ metadata {
        capability "Switch"
        capability "Switch Level"
        capability "Health Check"
-        capability "Light"


        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -94,13 +93,7 @@ def on() {
 }

 def setLevel(value) {
-    def additionalCmds = []
-    if (device.getDataValue("model") == "iQBR30" && value.toInteger() > 0) { // Handle iQ bulb not following spec
-        additionalCmds = zigbee.on()
-    } else if (device.getDataValue("manufacturer") == "MRVL") { // Handle marvel stack not reporting
-        additionalCmds = refresh()
-    }
-    zigbee.setLevel(value) + additionalCmds
+    zigbee.setLevel(value)
 }
 /**
 * PING is used by Device-Watch in attempt to reach the Device
@@ -110,15 +103,7 @@ def ping() {
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def installed() {
-    if (((device.getDataValue("manufacturer") == "MRVL") && (device.getDataValue("model") == "MZ100")) || (device.getDataValue("manufacturer") == "OSRAM SYLVANIA") || (device.getDataValue("manufacturer") == "OSRAM")) {
-        if ((device.currentState("level")?.value == null) || (device.currentState("level")?.value == 0)) {
-            sendEvent(name: "level", value: 100)
-        }
-    }
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }

 def configure() {
@@ -128,5 +113,5 @@ def configure() {
    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }
--- a/devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy
+++ b/devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy
@@ -13,8 +13,6 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType
-
 metadata {
    definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
    {
@@ -73,6 +71,9 @@ private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
 private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }

+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Public methods
 def installed() {
    log.trace "installed()"
@@ -85,9 +86,9 @@ def uninstalled() {
 def configure() {
    def cmds =
        zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
-                                  DataType.ENUM8, 0, 3600, null) +
+                                  TYPE_ENUM8, 0, 3600, null) +
        zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
-                                  DataType.UINT8, 600, 21600, 0x01)
+                                  TYPE_U8, 600, 21600, 0x01)
    log.info "configure() --- cmds: $cmds"
    return refresh() + cmds // send refresh cmds as part of config
 }
--- a/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy
@@ -15,7 +15,6 @@
 *
 *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
 	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -28,7 +27,6 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Health Check"
-		capability "Light"

 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
@@ -123,7 +121,7 @@ def ping() {
 }

 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }

 def configure() {
@@ -133,7 +131,7 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

 def setLevel(value) {
--- a/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy
@@ -15,7 +15,6 @@
 *
 *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -29,7 +28,6 @@ metadata {
        capability "Switch"
        capability "Switch Level"
        capability "Health Check"
-        capability "Light"

        attribute "colorName", "string"
        command "setGenericName"
@@ -141,7 +139,7 @@ def ping() {
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }

 def configure() {
--- a/devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy
+++ b/devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy
@@ -21,7 +21,6 @@ metadata {
        capability "Sensor"
        capability "Switch"
        capability "Health Check"
-        capability "Light"

        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
--- a/devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy
+++ b/devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy
@@ -23,7 +23,6 @@ metadata {
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15A", deviceJoinName: "Leviton Lumina RF Plug-In Appliance Module"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL15S", deviceJoinName: "Leviton Lumina RF Switch"
    }

    // simulator metadata
--- a/devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy
+++ b/devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy
@@ -11,7 +11,6 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
@@ -67,6 +66,8 @@ private getCLUSTER_BASIC() { 0x0000 }
 private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
 private getCLUSTER_POWER() { 0x0001 }
 private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }

 // Parse incoming device messages to generate events
 def parse(String description) {
@@ -127,8 +128,8 @@ def refresh() {
    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
    zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, DataType.UINT8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, DataType.ENUM8, 5, 21600, 1)
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }

 def configure() {
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
@@ -26,7 +26,6 @@ metadata {
        capability "Refresh"
        capability "Switch"
        capability "Switch Level"
-        capability "Light"

        attribute "colorName", "string"
        command "setGenericName"
--- a/devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy
+++ b/devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy
@@ -11,7 +11,6 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
 	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -108,7 +107,7 @@ def configure() {
 }

 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }

 def refreshAttributes() {
--- a/devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy
+++ b/devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy
@@ -11,7 +11,6 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-import physicalgraph.zigbee.zcl.DataType

 metadata {
    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -124,7 +123,7 @@ def configure() {
 }

 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }

 def refreshAttributes() {
--- a/devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md
+++ b/devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md
@@ -6,12 +6,6 @@ Works with:

 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
-* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
-* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
-* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
-* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
-* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
-* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)

 ## Table of contents

@@ -46,9 +40,4 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
-* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
--- a/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy
@@ -20,7 +20,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"

 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -29,8 +28,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
-		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
-		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}

 	simulator {
--- a/devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy
+++ b/devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy
@@ -25,7 +25,6 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
-		capability "Light"

 		command "reset"

--- a/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
+++ b/devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy
@@ -21,7 +21,6 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Light"

 		command "reset"

--- a/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
+++ b/devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy
@@ -19,7 +19,6 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Light"

 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -27,8 +26,6 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
-		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
--- a/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
+++ b/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
@@ -20,7 +20,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"

 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
--- a/smartapps/curb-v2/curb-control.src/curb-control.groovy
+++ b/smartapps/curb-v2/curb-control.src/curb-control.groovy
@@ -1,103 +0,0 @@
-/**
- *  Curb Control
- *
- *  Copyright 2016 Savanni D&#39;Gerinel
- *
- */
-definition(
-    name: "Curb Control",
-    namespace: "curb-v2",
-    author: "Savanni D&#39;Gerinel",
-    description: "Control point for Curb/SmartThings integration",
-    category: "Green Living",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Allow Endpoint to Control These Things...") {
-		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-	}
-}
-
-mappings {
-
-	path("/switches") {
-		action: [
-			GET: "listSwitches"
-		]
-	}
-	path("/switches/:id") {
-		action: [
-			GET: "showSwitch"
-		]
-	}
-	path("/switches/:id/:command") {
-		action: [
-			PUT: "updateSwitch"
-		]
-	}
-}
-
-def installed() {}
-
-def updated() {}
-
-
-//switches
-def listSwitches() {
-	switches.collect{device(it,"switch")}
-}
-
-def showSwitch() {
-	show(switches, "switch")
-}
-void updateSwitch() {
-	update(switches)
-}
-
-
-def deviceHandler(evt) {}
-
-private void update(devices) {
-	log.debug "update, request: params: ${params}, devices: $devices.id"
-    
-    
-	//def command = request.JSON?.command
-    def command = params.command
-    //let's create a toggle option here
-	if (command) 
-    {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-        	if(command == "toggle")
-       		{
-            	if(device.currentValue('switch') == "on")
-                  device.off();
-                else
-                  device.on();;
-       		}
-		}
-	}
-}
-
-private show(devices, type) {
-	def device = devices.find { it.id == params.id }
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-	else {
-		def attributeName = type == "motionSensor" ? "motion" : type
-		def s = device.currentState(attributeName)
-		[id: device.id, label: device.displayName, value: s?.value, unitTime: s?.date?.time, type: type]
-	}
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}
--- a/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
+++ b/smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy
@@ -51,7 +51,7 @@ definition(

 //Device Inputs
 preferences {
-	section("Allow OpenT2T to control these things...") {
+	section("Allow <PLACEHOLDER: Your App Name> to control these things...") {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
@@ -329,38 +329,34 @@ private getDeviceType(device) {
 		switch (it.name.toLowerCase()) {
 			case "switch":
 				deviceType = "switch"
-				if (caps.any { it.name.toLowerCase() == "power meter" }) {
-					return deviceType
-				}
-				if (caps.any { it.name.toLowerCase() == "switch level" }) {
-					deviceType = "light"
-					return deviceType
-				}
+				break
+			case "switch level":
+				deviceType = "light"
 				break
 			case "contact sensor":
 				deviceType = "contactSensor"
-				return deviceType
+				break
 			case "garageDoorControl":
 				deviceType = "garageDoor"
-				return deviceType
+				break
 			case "lock":
 				deviceType = "lock"
-				return deviceType
+				break
 			case "video camera":
 				deviceType = "camera"
-				return deviceType
+				break
 			case "motion sensor":
 				deviceType = "motionSensor"
-				return deviceType
+				break
 			case "presence sensor":
 				deviceType = "presenceSensor"
-				return deviceType
+				break
 			case "thermostat":
 				deviceType = "thermostat"
-				return deviceType
+				break
 			case "water sensor":
 				deviceType = "waterSensor"
-				return deviceType
+				break
 			default:
 				break
 		}
--- a/smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy
+++ b/smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy
@@ -20,9 +20,6 @@
 *      JLH - 02-15-2014 - Fuller use of ecobee API
 *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
 */
-
-include 'localization'
-
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -89,7 +86,7 @@ def authPage() {
 			if (numFound > 0)  {
 				section("") {
 					paragraph "Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings."
-					input(name: "ecobeesensors", title: "Select Ecobee Sensors ({{numFound}} found)", messageArgs: [numFound: numFound], type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
+					input(name: "ecobeesensors", title:"Select Ecobee Sensors (${numFound} found)", type: "enum", required:false, description: "Tap to choose", multiple:true, options:options)
 				}
 			}
 		}
--- a/smartapps/smartthings/ecobee-connect.src/i18n/ar.properties
+++ b/smartapps/smartthings/ecobee-connect.src/i18n/ar.properties
@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.ar=قم بتوصيل ثرموستات Ecobee بـ SmartThings.
-'''You are connected.'''.ar=أنت متصل.
-'''Click to enter Ecobee Credentials'''.ar=النقر لإدخال بيانات اعتماد Ecobee
-'''Login'''.ar=تسجيل الدخول
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.ar=انقر أدناه لتسجيل الدخول إلى خدمة ecobee والمصادقة على الوصول إلى SmartThings. تأكد من التمرير للأسفل على الصفحة ٢ والضغط على زر ”السماح“.
-'''Select Your Thermostats'''.ar=تحديد الثرموستات
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة أجهزة ثرموستات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Tap to choose'''.ar=النقر لاختيار
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.ar=انقر أدناه لرؤية قائمة مستشعرات ecobee المتوفرة في حساب ecobee، وحدد الأجهزة التي ترغب في توصيلها بـ SmartThings.
-'''Select Ecobee Sensors ({{numFound}} found)'''.ar=تحديد مستشعرات Ecobee‏ ‎({{numFound}} found)‎
-'''Your ecobee Account is now connected to SmartThings!'''.ar=حساب ecobee متصل الآن بـ SmartThings!
-'''Click 'Done' to finish setup.'''.ar=انقر فوق ”تم“ لإنهاء الإعداد.
-'''The connection could not be established!'''.ar=يتعذر إنشاء الاتصال!
-'''Click 'Done' to return to the menu.'''.ar=انقر فوق ”تم“ للعودة إلى القائمة.
-'''{{deviceName}} is connected to SmartThings'''.ar={{deviceName}} متصل بـ SmartThings
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.ar=تم قطع اتصال {{deviceName}} بـ SmartThings، لأن بيانات اعتماد الوصول قد تغيرت أو فُقدت. يُرجى الانتقال إلى التطبيق الذكي Ecobee (Connect)‎ وإعادة إدخال بيانات اعتماد تسجيل الدخول إلى حسابك.
-'''Your Ecobee thermostat'''.ar=ثرموستات Ecobee
--- a/smartapps/smartthings/ecobee-connect.src/i18n/th.properties
+++ b/smartapps/smartthings/ecobee-connect.src/i18n/th.properties
@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.th=เชื่อมต่อตัวควบคุมอุณหภูมิ Ecobee ของคุณเข้ากับ SmartThings
-'''You are connected.'''.th=คุณได้เชื่อมต่อแล้ว
-'''Click to enter Ecobee Credentials'''.th=คลิกเพื่อใส่ ข้อมูลยืนยันตัวตน Ecobee
-'''Login'''.th=เข้าสู่ระบบ
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.th=แตะด้านล่างเพื่อเข้าสู่บริการ Ecobee และอนุญาตการเข้าถึงของ SmartThings ดูให้แน่ใจว่าได้เลื่อนลงมาที่หน้า 2 แล้วกดปุ่ม 'อนุญาต'
-'''Select Your Thermostats'''.th=เลือกตัวควบคุมอุณหภูมิของคุณ
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการตัวควบคุมอุณหภูมิ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกตัวควบคุมอุณหภูมิที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Tap to choose'''.th=แตะเพื่อเลือก
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.th=แตะที่ด้านล่างเพื่อดูรายการเซ็นเซอร์ Ecobee ที่มีอยู่ในบัญชีผู้ใช้ Ecobee ของคุณ และเลือกเซ็นเซอร์ที่คุณต้องการจะเชื่อมต่อกับ SmartThings
-'''Select Ecobee Sensors ({{numFound} found)'''.th=เลือกเซ็นเซอร์ Ecobee ({{numFound}} found)
-'''Your ecobee Account is now connected to SmartThings!'''.th=ตอนนี้บัญชีผู้ใช้ Ecobee ของคุณเชื่อมต่อกับ SmartThings แล้ว
-'''Click 'Done' to finish setup.'''.th=คลิก 'เสร็จสิ้น' เพื่อทำการตั้งค่าให้เสร็จสิ้น
-'''The connection could not be established!'''.th=ไม่สามารถสร้างการเชื่อมต่อได้!
-'''Click 'Done' to return to the menu.'''.th=คลิก 'เสร็จสิ้น' เพื่อกลับไปยังเมนู
-'''{{deviceName}} is connected to SmartThings'''.th={{deviceName}} เชื่อมต่อกับ SmartThings แล้ว
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.th={{deviceName}} ถูกตัดการเชื่อมต่อจาก SmartThings เนื่องจากข้อมูลการเข้าถึงถูกเปลี่ยนแปลงหรือหายไป กรุณาไปที่ Ecobee (การเชื่อมต่อ) SmartApp และใส่ข้อมูลยืนยันตัวตนการเข้าสู่บัญชีผู้ใช้ของคุณอีกครั้ง
-'''Your Ecobee thermostat'''.th=ตัวควบคุมอุณหภูมิ Ecobee ของคุณ
--- a/smartapps/smartthings/ecobee-connect.src/i18n/tr.properties
+++ b/smartapps/smartthings/ecobee-connect.src/i18n/tr.properties
@@ -1,17 +0,0 @@
-'''Connect your Ecobee thermostat to SmartThings.'''.tr=Ecobee termostatınızı SmartThings'e bağlayın.
-'''You are connected.'''.tr=Bağlantı kurdunuz.
-'''Click to enter Ecobee Credentials'''.tr=Ecobee Kimlik Bilgilerinizi girmek için tıklayın
-'''Login'''.tr=Oturum aç
-'''Tap below to log in to the ecobee service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button.'''.tr=Ecobee servisinde oturum açmak ve SmartThings erişimine izin vermek için aşağıya dokunun. Ekranı 2. sayfaya kaydırdığınızdan emin olun ve 'İzin Ver' tuşuna basın.
-'''Select Your Thermostats'''.tr=Termostatlarınızı Seçin
-'''Tap below to see the list of ecobee thermostats available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee termostatlarının listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Tap to choose'''.tr=Seçmek için dokunun
-'''Tap below to see the list of ecobee sensors available in your ecobee account and select the ones you want to connect to SmartThings.'''.tr=Ecobee hesabınızda mevcut olan ecobee sensörlerinin listesini görüntülemek için aşağıya dokunun ve SmartThings'e bağlamak istediklerinizi seçin.
-'''Select Ecobee Sensors ({{numFound}} found)'''.tr=Ecobee Sensörlerini seçin ({{numFound}} bulundu)
-'''Your ecobee Account is now connected to SmartThings!'''.tr=Ecobee Hesabınız artık SmartThings'e bağlandı!
-'''Click 'Done' to finish setup.'''.tr=Kurulumu bitirmek için 'Bitti' öğesine tıklayın.
-'''The connection could not be established!'''.tr=Bağlantı kurulamadı!
-'''Click 'Done' to return to the menu.'''.tr=Menüye dönmek için 'Bitti' öğesine tıklayın.
-'''{{deviceName}} is connected to SmartThings'''.tr={{cihazİsmi}} SmartThings'e bağlandı
-'''{{deviceName}} is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials.'''.tr=Ecobee termostatınız
-'''Your Ecobee thermostat'''.tr=Ecobee termostatınız
--- a/smartapps/smartthings/hue-connect.src/hue-connect.groovy
+++ b/smartapps/smartthings/hue-connect.src/hue-connect.groovy
@@ -17,14 +17,14 @@
 */

 definition(
-		name: "Hue (Connect)",
-		namespace: "smartthings",
-		author: "SmartThings",
-		description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
-		category: "SmartThings Labs",
-		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-		singleInstance: true
+	name: "Hue (Connect)",
+	namespace: "smartthings",
+	author: "SmartThings",
+	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
+	singleInstance: true
 )

 preferences {
@@ -85,8 +85,7 @@ def bridgeDiscovery(params=[:])
 	}

 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
-		section("Please wait while we discover your Hue Bridge. Kindly note that you must first configure your Hue Bridge and Lights using the Philips Hue application. " +
-				"Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
@@ -179,7 +178,7 @@ def bulbDiscovery() {
 	}

 	if (bulbRefreshCount > 200 && numFound == 0) {
-		// Time out after 10 minutes
+		// Time out to avoid endless discovery
 		state.inBulbDiscovery = false
 		bulbRefreshCount = 0
 		return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Failed!", nextPage:"", refreshInterval:0, install:true, uninstall: true) {
@@ -217,32 +216,32 @@ private sendDeveloperReq() {
 	def token = app.id
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "POST",
-			path: "/api",
-			headers: [
-					HOST: host
-			],
-			body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
+		method: "POST",
+		path: "/api",
+		headers: [
+			HOST: host
+		],
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }

 private discoverHueBulbs() {
 	def host = getBridgeIP()
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/api/${state.username}/lights",
-			headers: [
-					HOST: host
-			]], "${selectedHue}", [callback: "lightsHandler"]))
+		method: "GET",
+		path: "/api/${state.username}/lights",
+		headers: [
+			HOST: host
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }

 private verifyHueBridge(String deviceNetworkId, String host) {
 	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
-			method: "GET",
-			path: "/description.xml",
-			headers: [
-					HOST: host
-			]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
+		method: "GET",
+		path: "/description.xml",
+		headers: [
+			HOST: host
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }

 private verifyHueBridges() {
@@ -400,7 +399,7 @@ def addBulbs() {
 					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
 				}
 			} else {
-				//backwards compatable
+			 	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
 				d?.completedSetup = true
@@ -1152,7 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
-	return "Setting color temperature to $ct"
+	return "Setting color temperature to $percent"
 }

 def setColor(childDevice, huesettings) {
@@ -1227,7 +1226,7 @@ private poll() {
 	def uri = "/api/${state.username}/lights/"
 	log.debug "GET: $host$uri"
 	sendHubCommand(new physicalgraph.device.HubAction("GET ${uri} HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
+		"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
 }

 private isOnline(id) {
@@ -1244,10 +1243,10 @@ private put(path, body) {
 	log.debug "BODY: ${bodyJSON}"

 	sendHubCommand(new physicalgraph.device.HubAction("PUT $uri HTTP/1.1\r\n" +
-			"HOST: ${host}\r\n" +
-			"Content-Length: ${length}\r\n" +
-			"\r\n" +
-			"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
+		"HOST: ${host}\r\n" +
+		"Content-Length: ${length}\r\n" +
+		"\r\n" +
+		"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
 }

 /*
--- a/smartapps/smartthings/lifx-connect.src/lifx-connect.groovy
+++ b/smartapps/smartthings/lifx-connect.src/lifx-connect.groovy
@@ -346,7 +346,7 @@ def devicesList(selector = '') {
 		if (resp.status == 200) {
 			return resp.data
 		} else {
-			log.debug("No response from device list call. ${resp.status} ${resp.data}")
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
 			return []
 		}
 	}
@@ -418,15 +418,9 @@ def updateDevices() {
 	}
 	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
-		if (state.devices[it.deviceNetworkId])
-			state.devices[it.deviceNetworkId] = null
-		// The reason the implementation is trying to delete this bulb is because it is not longer connected to the LIFX location.
-		// Adding "try" will prevent this exception from happening.
-		// Ideally device health would show to the user that the device is not longer accessible so that the user can either force delete it or remove it from the SmartApp.
-		try {
-			deleteChildDevice(it.deviceNetworkId)
-		} catch (Exception e) {
-			log.debug("Can't remove this device because it's being used by an SmartApp")
-		}
+		state.devices[it.deviceNetworkId] = null
+		deleteChildDevice(it.deviceNetworkId)
 	}
 }
+
+