MSA-1846: null

[CHF-552] Implementation of Health Check for Aeon Siren.

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
     }
     repositories {
         mavenLocal()

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -21,28 +21,30 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-        
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+		capability "Health Check"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+		fingerprint mfr:"010F", prod:"0B01", model:"2002"
+		fingerprint mfr:"010F", prod:"0B01", model:"1002"
 	}
 
 	simulator {
-    
 	}
-    
-    tiles(scale: 2) {
-    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
-            }
-            
-            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
+				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+			}
+			
+			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}       
-        }
-        
-        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			}
+		}
+		
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -54,22 +56,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-       	        
-        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-        	state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "FGFS"
-        details(["FGFS","battery", "temperature"])
-    }
+
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main "FGFS"
+		details(["FGFS","battery", "temperature"])
+	}
 }
 
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-    
-    if (description.startsWith("Err 106")) {
+
+	if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -84,13 +86,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
 
-        if (cmd) {
-            log.debug "Parsed '${cmd}'"
-            zwaveEvent(cmd)
-        }
-    }
+		if (cmd) {
+			log.debug "Parsed '${cmd}'"
+			zwaveEvent(cmd)
+		}
+	}
 }
 
 //security
@@ -107,7 +109,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -121,105 +123,124 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-    def cmds = []
-    cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
-    [event, response(cmds)]
+	def cmds = []
+	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	// cmds << "delay 500"
+	cmds << encap(zwave.batteryV1.batteryGet())
+	[event, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-    
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+	log.debug "deviceIdType:                ${cmd.deviceIdType}"
+
+	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
 		String serialNumber = "h'"
-        
-        cmd.deviceIdData.each{ data ->
-        	serialNumber += "${String.format("%02X", data)}"
-        }
-        
-        updateDataValue("serialNumber", serialNumber)
-        log.debug "${device.displayName} - serial number: ${serialNumber}"
-    }
+
+		cmd.deviceIdData.each{ data ->
+			serialNumber += "${String.format("%02X", data)}"
+		}
+
+		updateDataValue("serialNumber", serialNumber)
+		log.debug "${device.displayName} - serial number: ${serialNumber}"
+	}
+
+	def response_cmds = []
+	if (!device.currentState("temperature")) {
+		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	}
+	if (!getDataValue("version") && !zwaveInfo.ver) {
+		log.debug "Requesting Version Report"
+		response_cmds << "delay 500"
+		response_cmds << encap(zwave.versionV1.versionGet())
+	}
+	response_cmds << "delay 1000"
+	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
+	[[:], response(response_cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+	log.debug "applicationVersion:      ${cmd.applicationVersion}"
+	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
+
+	result << createEvent(map)
+
+	if (!getDataValue("serialNumber")) {
+		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
+	} else {
+		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
+	}
+	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-    if (cmd.notificationType == 5) {
-    	switch (cmd.event) {                
-        	case 2:
-            	map.name = "water"
-                map.value = "wet"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-                
-            case 0:
-            	map.name = "water"
-                map.value = "dry"
-                map.descriptionText = "${device.displayName} is ${map.value}"
-            	break
-        }
-    } else if (cmd.notificationType == 7) {
-    	switch (cmd.event) {
-        	case 0:
-            	map.name = "tamper"
-                map.value = "inactive"
-                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+	if (cmd.notificationType == 5) {
+		switch (cmd.event) {
+			case 2:
+				map.name = "water"
+				map.value = "wet"
+				map.descriptionText = "${device.displayName} is ${map.value}"
 				break
-                
-        	case 3:
-            	map.name = "tamper"
-                map.value = "active"
-                map.descriptionText = "${device.displayName}: tamper alarm activated"
-            	break
-        }
-    }
-    
-    createEvent(map)
+
+			case 0:
+				map.name = "water"
+				map.value = "dry"
+				map.descriptionText = "${device.displayName} is ${map.value}"
+				break
+		}
+	} else if (cmd.notificationType == 7) {
+		switch (cmd.event) {
+			case 0:
+				map.name = "tamper"
+				map.value = "inactive"
+				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+
+			case 3:
+				map.name = "tamper"
+				map.value = "active"
+				map.descriptionText = "${device.displayName}: tamper alarm activated"
+				break
+		}
+	}
+
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-        // temperature
-        def cmdScale = cmd.scale == 1 ? "F" : "C"
-        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-        map.unit = getTemperatureScale()
-        map.name = "temperature"
-        map.displayed = true
+		// temperature
+		def cmdScale = cmd.scale == 1 ? "F" : "C"
+		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+		map.unit = getTemperatureScale()
+		map.name = "temperature"
+		map.displayed = true
 	}
-	
-    createEvent(map)
+
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -228,19 +249,18 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	
-    def cmds = []
-    
-	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-	encapSequence(cmds, 500)
+	// default initial state
+	sendEvent(name: "water", value: "dry")
+
+	def cmds = []
+
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
+
+	encapSequence(cmds, 200)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -249,7 +269,7 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-    "5601${cmd.format()}0000"
+	"5601${cmd.format()}0000"
 }
 
 private encapSequence(commands, delay=200) {
@@ -257,13 +277,10 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
-	//todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
-    	crc16(cmd)
-    }
-}
+	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
+		// Secure inclusion failed
+		crc16(cmd)
+	} else {
+		secure(cmd)
+	}
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
+		capability "Health Check"
         
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
@@ -240,7 +241,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
     def cmds = []
     
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -0,0 +1,37 @@
+# Aeon Siren
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs Siren (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -20,10 +20,11 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
+	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
  }
 
  simulator {
@@ -58,6 +59,9 @@ metadata {
 }
 
 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -148,3 +152,10 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -1,12 +1,12 @@
 /**
  *  Device Type Definition File
  *
- *  Device Type:		Fibaro Flood Sensor
- *  File Name:			fibaro-flood-sensor.groovy
- *	Initial Release:	2014-12-10
- *	@author:			Todd Wackford
- *  Email:				todd@wackford.net
- *  @version:			1.0
+ *  Device Type:        Fibaro Flood Sensor
+ *  File Name:          fibaro-flood-sensor.groovy
+ *  Initial Release:    2014-12-10
+ *  @author:            Todd Wackford
+ *  Email:              todd@wackford.net
+ *  @version:           1.0
  *
  *  Copyright 2014 SmartThings
  *
@@ -26,8 +26,8 @@
  * not displayed to the user. We do this so we can receive events and display on device 
  * activity. If the user wants to display the tamper tile, adjust the tile display lines
  * with the following:
- *		main(["water", "temperature", "tamper"])
- *		details(["water", "temperature", "battery", "tamper"])
+ *      main(["water", "temperature", "tamper"])
+ *      details(["water", "temperature", "battery", "tamper"])
  *
  * @param none
  *
@@ -39,13 +39,18 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Configuration"
 		capability "Battery"
-       
-        command		"resetParams2StDefaults"
-        command		"listCurrentParams"
-        command		"updateZwaveParam"
-        command		"test"
-        
+		capability "Health Check"
+    capability "Sensor"
+    
+		command    "resetParams2StDefaults"
+		command    "listCurrentParams"
+		command    "updateZwaveParam"
+		command    "test"
+
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
+		fingerprint mfr:"010F", prod:"0000", model:"2002"
+		fingerprint mfr:"010F", prod:"0000", model:"1002"
+		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -86,9 +91,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-        standardTile("tamper", "device.tamper") {
-			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+		standardTile("tamper", "device.tamper") {
+			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -106,26 +111,17 @@ metadata {
 def parse(String description)
 {
 	def result = []
-	
-    if (description == "updated") {
-    	if (!state.MSR) {
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
-			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		} 
-    } else {
-		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
-    
-		if (cmd) {
-			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
-		}
-    }
-    
-    result << response(zwave.batteryV1.batteryGet().format())
-    
-    if ( result[0] != null ) {
+
+	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+
+	if (cmd) {
+		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+	}
+
+	if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-    }
+	}
 }
 
 
@@ -142,10 +138,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result += lateConfigure(true)
+		result << lateConfigure(true)
 	} else {
-		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-        log.debug "We're done with WakeUp!"
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
 	result
 }
@@ -153,7 +148,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-    
+
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -184,7 +179,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-    
+
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -199,49 +194,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-    log.debug "BasicSet with CMD = ${cmd}"
-    
-    if (!isConfigured()) {
-    	def result = []
-    	def map = [:]
-    
-    	map.name = "water"
+	log.debug "BasicSet with CMD = ${cmd}"
+
+	if (!isConfigured()) {
+		def result = []
+		def map = [:]
+
+		map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-    
-    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-    	result += lateConfigure(true)
-    
-    	result << createEvent(map)
-        
-        result
-    }
+
+		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+		result += lateConfigure(true)
+
+		result << createEvent(map)
+
+		result
+	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-    
+
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-        
-        log.debug "CMD = SensorAlarmReport: ${cmd}"
-    	setConfigured()
-    } else if ( cmd.sensorType == 0) {
-    	map.name = "tamper"
-        map.isStateChange = true
-        map.value = cmd.sensorState ? "tampered" : "secure"
-        map.descriptionText = "${device.displayName} has been tampered with"
-        runIn(30, "resetTamper") //device does not send alarm cancelation
-        
-    } else if ( cmd.sensorType == 1) {
-    	map.name = "tamper"
-        map.value = cmd.sensorState ? "tampered" : "secure"
-        map.descriptionText = "${device.displayName} has been tampered with"
-        runIn(30, "resetTamper") //device does not send alarm cancelation
-        
+
+		log.debug "CMD = SensorAlarmReport: ${cmd}"
+		setConfigured()
+	} else if ( cmd.sensorType == 0) {
+		map.name = "tamper"
+		map.isStateChange = true
+		map.value = cmd.sensorState ? "tampered" : "secure"
+		map.descriptionText = "${device.displayName} has been tampered with"
+		runIn(30, "resetTamper") //device does not send alarm cancelation
+
+	} else if ( cmd.sensorType == 1) {
+		map.name = "tamper"
+		map.value = cmd.sensorState ? "tampered" : "secure"
+		map.descriptionText = "${device.displayName} has been tampered with"
+		runIn(30, "resetTamper") //device does not send alarm cancelation
+
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -250,10 +245,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 
 def resetTamper() {
 	def map = [:]
-    map.name = "tamper"
-    map.value = "secure"
-    map.descriptionText = "$device.displayName is secure"
-    sendEvent(map)
+	map.name = "tamper"
+	map.value = "secure"
+	map.descriptionText = "$device.displayName is secure"
+	sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -267,10 +262,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-    
-    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-    	result += lateConfigure(true)
-    }
+
+	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+		result += lateConfigure(true)
+	}
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -282,17 +277,17 @@ def setConfigured() {
 
 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-    
-    return configured
+
+	return configured
 }
 
 def lateConfigure(setConf = False) {
 	def res = response(configure())
-    
-    if (setConf)
-        setConfigured()
-        
-    return res
+
+	if (setConf)
+		setConfigured()
+
+	return res
 }
 
  /**
@@ -304,26 +299,34 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-    def cmds = []
-    
-    // send associate to group 2 to get alarm data
-    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-    
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-    
-    // send associate to group 3 to get sensor data reported only to hub
-    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-	// temp hysteresis set to .5 degrees celcius
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+	// default initial state
+	sendEvent(name: "water", value: "dry")
+
+	def cmds = []
+
+	// send associate to group 2 to get alarm data
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
+
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
+
+	// send associate to group 3 to get sensor data reported only to hub
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// reporting frequency of temps and battery set to one hour
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-    
-    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-    
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+
+	// temp hysteresis set to .5 degrees celcius
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+
+	cmds << zwave.batteryV1.batteryGet().format()
+
+	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
 	delayBetween(cmds, 100)
 }
 
@@ -349,18 +352,18 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {     
-        def pNumber = params.paramNumber
-        def pSize	= params.size
-        def pValue	= [params.value]
-        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+	if ( params ) {
+		def pNumber = params.paramNumber
+		def pSize	= params.size
+		def pValue	= [params.value]
+		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
 
 		def cmds = []
-        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)        
-    }
+		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+		delayBetween(cmds, 1000)
+	}
 }
 
  /**
@@ -377,26 +380,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
-    
-    delayBetween(cmds, 1200)
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
+
+	delayBetween(cmds, 1200)
 }
 
  /**
@@ -413,25 +416,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-    
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+
 	delayBetween(cmds, 1200)
 }
 

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -46,6 +46,7 @@
 		capability 	"Illuminance Measurement"
 		capability 	"Sensor"
 		capability 	"Battery"
+		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -125,6 +126,9 @@
  */
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
+	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
     def cmds = []
     
     // send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -39,8 +39,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
+		capability "Sensor"
         
         command "enrollResponse"
 
@@ -31,8 +32,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
         
          valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,6 +24,7 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 			}
 		}
 

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+        capability "Health Check"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_LT01", deviceJoinName: "Halo RL56 Wireless"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..5000)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if (event.name == "colorTemperature") {
+            event.unit = "K"
+        }
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def refresh() {
+	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
+	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
+        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    }
+    
+	cmds
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
+def configure() {
+    log.debug "configure()"
+    configureHealthCheck()
+    // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName, displayed: false)
+    }
+}

devicetypes/smartthings/zwave-device.src/zwave-device.groovy

@@ -33,7 +33,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -51,7 +51,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power") {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -38,8 +38,8 @@ metadata {
 	
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state("battery", label:'${currentValue}% battery', unit:"")

devicetypes/smartthings/zwave-sensor.src/zwave-sensor.groovy

@@ -32,8 +32,8 @@ metadata {
 
 	tiles {
 		standardTile("sensor", "device.sensor", width: 2, height: 2) {
-			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#ffffff")
-			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#53a7c0")
+			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#cccccc")
+			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#00A0DC")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -47,7 +47,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -46,7 +46,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -33,7 +33,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -0,0 +1,794 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon Smart Home",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions ltd",
+    description: "Gideon Smart Home SmartApp allows you to connect and control all of your SmartThings devices through the Gideon app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon Smart Home API app", displayLink: "gideon.ai"])
+
+preferences {
+	section("Control these contact sensors...") {
+        input "contact", "capability.contactSensor", multiple:true, required:false
+    }
+    section("Control these switch levels...") {
+        input "switchlevels", "capability.switchLevel", multiple:true, required:false
+    }
+/*    section("Control these thermostats...") {
+        input "thermostats", "capability.thermostat", multiple:true, required:false
+    }*/
+    section("Control the color for these devices...") {
+        input "colors", "capability.colorControl", multiple:true, required:false
+    }
+    section("Control the color temperature for these devices...") {
+        input "kelvin", "capability.colorTemperature", multiple:true, required:false
+    }
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true, required:false
+    }
+    section("Control these smoke alarms...") {
+        input "smoke_alarms", "capability.smokeDetector", multiple:true, required:false
+    }
+    section("Control these window shades...") {
+        input "shades", "capability.windowShade", multiple:true, required:false
+    }
+    section("Control these garage doors...") {
+        input "garage", "capability.garageDoorControl", multiple:true, required:false
+    }
+    section("Control these water sensors...") {
+        input "water_sensors", "capability.waterSensor", multiple:true, required:false
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true, required:false
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true, required:false
+    }
+	section("Control these outlets...") {
+    	input "outlets", "capability.outlet", multiple:true, required:false
+    }
+    section("Control these power meters...") {
+        input "meters", "capability.powerMeter", multiple:true, required:false
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true, required:false
+    }
+    section("Control these temperature sensors...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement", multiple:true, required:false
+    }
+    section("Control these batteries...") {
+	    input "batteries", "capability.battery", multiple:true, required:false
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+}
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+   path("/getalldevices") {
+    action: [
+      	GET: "getAllDevices"
+   ]
+  }
+  /*
+  path("/thermostat/setcool/:id/:temp") {
+    action: [
+      GET: "setCoolTemp"
+    ]
+  }
+  path("/thermostat/setheat/:id/:temp") {
+    action: [
+      GET: "setHeatTemp"
+    ]
+  }
+  path("/thermostat/setfanmode/:id/:mode") {
+    action: [
+      GET: "setFanMode"
+    ]
+  }
+  path("/thermostat/setmode/:id/:mode") {
+    action: [
+      GET: "setThermostatMode"
+    ]
+  }
+  path("/thermostat/:id") {
+    action: [
+      GET: "getThermostatStatus"
+    ]
+  }
+  */
+  path("/light/dim/:id/:dim") {
+    action: [
+      GET: "setLevelStatus"
+    ]
+  }
+  path("/light/kelvin/:id/:kelvin") {
+    action: [
+      GET: "setKelvin"
+    ]
+  }
+  path("/colorlight/:id/:hue/:sat") {
+    action: [
+      GET: "setColor"
+    ]
+  }
+  path("/light/status/:id") {
+    action: [
+      GET: "getLightStatus"
+    ]
+  }
+  path("/light/on/:id") {
+    action: [
+      GET: "turnOnLight"
+    ]
+  }
+  path("/light/off/:id") {
+    action: [
+      GET: "turnOffLight"
+    ]
+  }
+  path("/doorlocks/lock/:id") {
+    action: [
+      GET: "lockDoorLock"
+    ]
+  }
+  path("/doorlocks/unlock/:id") {
+    action: [
+      GET: "unlockDoorLock"
+    ]
+  }
+  path("/doorlocks/:id") {
+    action: [
+      GET: "getDoorLockStatus"
+    ]
+  }
+  path("/contacts/:id") {
+    action: [
+  	GET: "getContactStatus"
+    ]
+  }
+  path("/smoke/:id") {
+    action: [
+   	GET: "getSmokeStatus"
+	]
+  }
+    path("/shades/open/:id") {
+    action: [
+      GET: "openShade"
+    ]
+  }
+  path("/shades/preset/:id") {
+    action: [
+      GET: "presetShade"
+    ]
+  }
+  path("/shades/close/:id") {
+    action: [
+      GET: "closeShade"
+    ]
+  }
+  	path("/shades/:id") {
+    action: [
+	GET: "getShadeStatus"
+	]
+}
+    path("/garage/open/:id") {
+    action: [
+      GET: "openGarage"
+    ]
+  }
+  path("/garage/close/:id") {
+    action: [
+      GET: "closeGarage"
+    ]
+  }
+  	path("/garage/:id") {
+    action: [
+  		GET: "getGarageStatus"
+  	]
+  }
+    path("/watersensors/:id") {
+    action: [
+      		GET: "getWaterSensorStatus"
+    	]
+  }
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  path("/meters/:id") {
+    action: [
+      GET: "getMeterStatus"
+    ]
+  }
+  path("/batteries/:id") {
+    action: [
+      GET: "getBatteryStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/turnon/:id") {
+    action: [
+      GET: "turnOnOutlet"
+    ]
+  }
+  path("/outlets/turnoff/:id") {
+    action: [
+      GET: "turnOffOutlet"
+    ]
+  }
+  path("/switches/turnon/:id") {
+    action: [
+      GET: "turnOnSwitch"
+    ]
+  }
+  path("/switches/turnoff/:id") {
+    action: [
+      GET: "turnOffSwitch"
+    ]
+  }
+  path("/switches/:id") {
+    action: [
+      GET: "getSwitchStatus"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+    def locks_list = locks.collect{device(it,"Lock")}
+    /*def thermo_list = thermostats.collect{device(it,"Thermostat")}*/
+    def colors_list = colors.collect{device(it,"Color")}
+    def kelvin_list = kelvin.collect{device(it,"Kelvin")}
+    def contact_list = contact.collect{device(it,"Contact Sensor")}
+    def smokes_list = smoke_alarms.collect{device(it,"Smoke Alarm")}
+    def shades_list = shades.collect{device(it,"Window Shade")}
+    def garage_list = garage.collect{device(it,"Garage Door")}
+    def water_sensors_list = water_sensors.collect{device(it,"Water Sensor")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+	def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def switchlevels_list = switchlevels.collect{device(it,"Switch Level")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    def meters_list = meters.collect{device(it,"Power Meters")}
+    def battery_list = batteries.collect{device(it,"Batteries")}
+    return outlets_list + kelvin_list + colors_list + switchlevels_list + smokes_list + contact_list + water_sensors_list + shades_list + garage_list + locks_list + presences_list + motions_list + switches_list + temp_list + meters_list + battery_list
+}
+
+//thermostat
+/*
+def setCoolTemp() {
+	def device = thermostats.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(device.hasCommand("setCoolingSetpoint")) {
+            	device.setCoolingSetpoint(params.temp.toInteger());
+                return [result_action: "200"]
+            }
+            else {
+            	httpError(510, "Not supported!")
+            }
+       }
+}
+def setHeatTemp() {
+	def device = thermostats.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(device.hasCommand("setHeatingSetpoint")) {
+            	device.setHeatingSetpoint(params.temp.toInteger());
+                return [result_action: "200"]
+            }
+            else {
+            	httpError(510, "Not supported!")
+            }
+       }
+}
+def setFanMode() {
+	def device = thermostats.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        if(device.hasCommand("setThermostatFanMode")) {
+            	device.setThermostatFanMode(params.mode);
+                return [result_action: "200"]
+            }
+            else {
+            	httpError(510, "Not supported!")
+            }
+       }
+}
+def setThermostatMode() {
+	def device = thermostats.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        if(device.hasCommand("setThermostatMode")) {
+            	device.setThermostatMode(params.mode);
+                return [result_action: "200"]
+            }
+            else {
+            	httpError(510, "Not supported!")
+            }
+       }
+}
+def getThermostatStatus() {
+	def device = thermostats.find{ it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [ThermostatOperatingState: device.currentValue('thermostatOperatingState'), ThermostatSetpoint: device.currentValue('thermostatSetpoint'), 
+            			ThermostatFanMode: device.currentValue('thermostatFanMode'), ThermostatMode: device.currentValue('thermostatMode')]
+       	}
+}
+*/
+//light
+def turnOnLight() {
+    def device = switches.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            device.on();
+                  
+            return [Device_id: params.id, result_action: "200"]
+        }
+    }
+
+def turnOffLight() {
+    def device = switches.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            device.off();
+                  
+            return [Device_id: params.id, result_action: "200"]
+        }
+}
+
+def getLightStatus() {
+	def device = switches.find{ it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Status: device.currentValue('switch'), Dim: getLevelStatus(params.id), Color: getColorStatus(params.id), Kelvin: getKelvinStatus(params.id)]
+        }
+}
+
+//color control
+def setColor() {
+    def device = colors.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	
+            def map = [hue:params.hue.toInteger(), saturation:params.sat.toInteger()]
+            
+            device.setColor(map);
+                  
+            return [Device_id: params.id, result_action: "200"]
+    }
+}
+
+def getColorStatus(id) {
+	def device = colors.find { it.id == id }
+    if (!device) {
+            return [Color: "none"]
+        } else {
+        	return [hue: device.currentValue('hue'), saturation: device.currentValue('saturation')]
+        }
+}
+
+//kelvin control
+def setKelvin() {
+    def device = kelvin.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        
+            device.setColorTemperature(params.kelvin.toInteger());
+                  
+            return [Device_id: params.id, result_action: "200"]
+    }
+}
+
+def getKelvinStatus(id) {
+	def device = kelvin.find { it.id == id }
+    if (!device) {
+            return [kelvin: "none"]
+        } else {
+        	return [kelvin: device.currentValue('colorTemperature')]
+        }
+}
+
+//switch level
+def getLevelStatus() {
+	def device = switchlevels.find { it.id == params.id }
+    if (!device) {
+            [Level: "No dimmer"]
+        } else {
+        	return [Level: device.currentValue('level')]
+        }
+}
+
+def getLevelStatus(id) {
+	def device = switchlevels.find { it.id == id }
+    if (!device) {
+            [Level: "No dimmer"]
+        } else {
+        	return [Level: device.currentValue('level')]
+        }
+}
+
+
+def setLevelStatus() {
+	def device = switchlevels.find { it.id == params.id }
+    def level = params.dim
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	device.setLevel(level.toInteger())
+        	return [result_action: "200", Level: device.currentValue('level')]
+        }
+}
+
+
+//contact sensors
+def getContactStatus() {
+	def device = contact.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	def args = getTempSensorsStatus(device.id)
+        	return [Device_state: device.currentValue('contact')] + args
+        }
+}
+
+//smoke detectors
+def getSmokeStatus() {
+	def device = smoke_alarms.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        def bat = getBatteryStatus(device.id)
+        	return [Device_state: device.currentValue('smoke')] + bat
+        }
+}
+
+//garage
+def getGarageStatus() {
+	def device = garage.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('door')]
+        }
+}
+
+def openGarage() {
+    def device = garage.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.open();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+
+def closeGarage() {
+	def device = garage.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.close();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+//shades
+def getShadeStatus() {
+	def device = shades.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('windowShade')]
+        }
+}
+
+def openShade() {
+    def device = shades.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.open();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+    
+def presetShade() {
+    def device = shades.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.presetPosition();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+
+def closeShade() {
+	def device = shades.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.close();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+
+//water sensor
+def getWaterSensorStatus() {
+	def device = water_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	def bat = getBatteryStatus(device.id)
+        	return [Device_state: device.currentValue('water')] + bat
+        }
+}
+//batteries
+def getBatteryStatus() {
+	def device = batteries.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.latestValue("battery")]
+        }
+}
+
+def getBatteryStatus(id) {
+	def device = batteries.find { it.id == id }
+    if (!device) {
+            return []
+        } else {
+        	return [battery_state: device.latestValue("battery")]
+        }
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	def bat = getBatteryStatus(device.id)
+        	return [Device_state: device.currentValue('lock')] + bat
+        }
+}
+
+def lockDoorLock() {
+    def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.lock();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+
+def unlockDoorLock() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.unlock();
+                  
+            return [Device_id: params.id, result_action: "200"]                              
+            }
+    }
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        def bat = getBatteryStatus(device.id)
+        	return [Device_state: device.currentValue('presence')] + bat
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	def args = getTempSensorsStatus(device.id)
+        	return [Device_state: device.currentValue('motion')] + args
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+
+    def device = outlets.find { it.id == params.id }
+    if (!device) {
+            device = switches.find { it.id == params.id }
+            if(!device) {
+            	httpError(404, "Device not found")
+        	}
+     }
+     def watt = getMeterStatus(device.id)
+       	
+     return [Device_state: device.currentValue('switch')] + watt
+}
+
+def getMeterStatus() {
+
+    def device = meters.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_id: device.id, Device_type: device.type, Current_watt: device.currentValue("power")]
+  }
+}
+
+def getMeterStatus(id) {
+
+    def device = meters.find { it.id == id }
+   	if (!device) {
+            return []
+        } else {
+        	return [Current_watt: device.currentValue("power")]
+  }
+}
+
+
+def turnOnOutlet() {
+    def device = outlets.find { it.id == params.id }
+    if (!device) {
+            device = switches.find { it.id == params.id }
+            if(!device) {
+            	httpError(404, "Device not found")
+        	}
+     }
+     
+     device.on();
+                  
+     return [Device_id: params.id, result_action: "200"]
+}
+
+def turnOffOutlet() {
+    def device = outlets.find { it.id == params.id }
+    if (!device) {
+            device = switches.find { it.id == params.id }
+            if(!device) {
+            	httpError(404, "Device not found")
+        	}
+     }
+            
+     device.off();
+                  
+     return [Device_id: params.id, result_action: "200"]
+}
+
+//SWITCH
+def getSwitchStatus() {
+	def device = switches.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('switch'), Dim: getLevelStatus(params.id)]
+	}
+}
+
+def turnOnSwitch() {
+    def device = switches.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.on();
+                  
+            return [Device_id: params.id, result_action: "200"]
+        }
+}
+
+def turnOffSwitch() {
+    def device = switches.find { it.id == params.id }
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            
+            device.off();
+                  
+            return [Device_id: params.id, result_action: "200"]
+        }
+}
+
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	def bat = getBatteryStatus(device.id)
+            def scale = [Scale: location.temperatureScale]
+        	return [Device_state: device.currentValue('temperature')] + scale + bat
+   }
+}
+
+def getTempSensorsStatus(id) {	
+    def device = temperature_sensors.find { it.id == id }
+    if (!device) {
+            return []
+        } else {
+        	def bat = getBatteryStatus(device.id)
+        	return [temperature: device.currentValue('temperature')] + bat
+   		}
+   }

smartapps/jnewland/json-api.src/json-api.groovy

@@ -0,0 +1,145 @@
+/**
+ *  JSON
+ *
+ *  Copyright 2015 Jesse Newland
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "JSON API",
+    namespace: "jnewland",
+    author: "Jesse Newland",
+    description: "A JSON API for SmartThings",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: true)
+
+
+def installed() {
+    initialize()
+}
+
+def updated() {
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+}
+
+preferences {
+    page(name: "copyConfig")
+}
+
+def copyConfig() {
+    if (!state.accessToken) {
+        createAccessToken()
+    }
+    dynamicPage(name: "copyConfig", title: "Config", install:true) {
+        section("Select devices to include in the /devices API call") {
+            input "switches", "capability.switch", title: "Switches", multiple: true, required: false
+            input "hues", "capability.colorControl", title: "Hues", multiple: true, required: false
+        }
+
+        section() {
+            paragraph "View this SmartApp's configuration to use it in other places."
+            href url:"https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
+        }
+
+        section() {
+            href url:"https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}", style:"embedded", required:false, title:"Debug", description:"View accessories JSON"
+        }
+    }
+}
+
+def renderConfig() {
+    def configJson = new groovy.json.JsonOutput().toJson([
+        description: "JSON API",
+        platforms: [
+            [
+                platform: "SmartThings",
+                name: "SmartThings",
+                app_id:        app.id,
+                access_token:  state.accessToken
+            ]
+        ],
+    ])
+
+    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
+    render contentType: "text/plain", data: configString
+}
+
+def deviceCommandMap(device, type) {
+  device.supportedCommands.collectEntries { command->
+      def commandUrl = "https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/${type}/${device.id}/command/${command.name}?access_token=${state.accessToken}"
+      [
+        (command.name): commandUrl
+      ]
+  }
+}
+
+def authorizedDevices() {
+    [
+        switches: switches,
+        hues: hues
+    ]
+}
+
+def renderDevices() {
+    def deviceData = authorizedDevices().collectEntries { devices->
+        [
+            (devices.key): devices.value.collect { device->
+                [
+                    name: device.displayName,
+                    commands: deviceCommandMap(device, devices.key)
+                ]
+            }
+        ]
+    }
+    def deviceJson    = new groovy.json.JsonOutput().toJson(deviceData)
+    def deviceString  = new groovy.json.JsonOutput().prettyPrint(deviceJson)
+    render contentType: "application/json", data: deviceString
+}
+
+def deviceCommand() {
+  def device  = authorizedDevices()[params.type].find { it.id == params.id }
+  def command = params.command
+  if (!device) {
+      httpError(404, "Device not found")
+  } else {
+      if (params.value) {
+        device."$command"(params.value)
+      } else {
+        device."$command"()
+      }
+  }
+}
+
+mappings {
+    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
+        path("/devices")                      { action: [GET: "authError"] }
+        path("/config")                       { action: [GET: "authError"] }
+        path("/:type/:id/command/:command")   { action: [PUT: "authError"] }
+    } else {
+        path("/devices")                      { action: [GET: "renderDevices"]  }
+        path("/config")                       { action: [GET: "renderConfig"]  }
+        path("/:type/:id/command/:command")   { action: [PUT: "deviceCommand"] }
+    }
+}
+
+def authError() {
+    [error: "Permission denied"]
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -39,7 +39,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -55,7 +55,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
@@ -66,54 +66,48 @@ preferences {
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors ?: []
-	inputList += garageDoors ?: []
-	inputList += locks ?: []
-	inputList += cameras ?: []
-	inputList += motionSensors ?: []
-	inputList += presenceSensors ?: []
-	inputList += switches ?: []
-	inputList += thermostats ?: []
-	inputList += waterSensors ?: []
+	inputList += contactSensors?: []
+	inputList += garageDoors?: []
+	inputList += locks?: []
+	inputList += cameras?: []
+	inputList += motionSensors?: []
+	inputList += presenceSensors?: []
+	inputList += switches?: []
+	inputList += thermostats?: []
+	inputList += waterSensors?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
 	path("/subscriptionURL/:url") {
-		action:
-		[
+		action: [
 				PUT: "updateEndpointURL"
 		]
 	}
 	path("/connectionId/:connId") {
-		action:
-		[
+		action: [
 				PUT: "updateConnectionId"
 		]
 	}
 	path("/devices") {
-		action:
-		[
+		action: [
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
-		[
+		action: [
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
-		[
+		action: [
 				PUT: "updateDevice"
 		]
 	}
 	path("/subscription/:id") {
-		action:
-		[
-				POST  : "registerDeviceChange",
+		action: [
+				POST: "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
@@ -145,7 +139,7 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -157,7 +151,7 @@ def registerDeviceChange() {
 	def myDevice = findDevice(params.id)
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -186,16 +180,20 @@ def eventHandler(evt) {
 	def evt_name = evt.name
 	def evt_device = evt.device
 	def evt_deviceType = getDeviceType(evt_device);
+	def deviceInfo
+
+	if(evt_deviceType == "thermostat")
+	{
+		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
+	}
+	else
+	{
+		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
+	}
+
 	def params = [
-			uri : "${state.endpointURL}/${state.connectionId}",
-			body: [
-					name        : evt_device.displayName,
-					id          : evt_device.id,
-					deviceType  : evt_deviceType,
-					manufacturer: evt_device.getManufacturerName(),
-					model       : evt_device.getModelName(),
-					attributes  : deviceAttributeList(evt_device)
-			]
+			uri: "${state.endpointURL}/${state.connectionId}",
+			body: [ deviceInfo ]
 	]
 	try {
 		log.trace "POST URI: ${params.uri}"
@@ -230,10 +228,13 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		} else {
-			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+		if(deviceType == "thermostat")
+		{
+			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		}
+		else
+		{
+			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
 		}
 	}
 
@@ -246,10 +247,13 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-	} else {
-		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
+	if(deviceType == "thermostat")
+	{
+		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+	}
+	else
+	{
+		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
 	}
 	log.debug "getDevice, return: ${device}"
 	return device
@@ -261,18 +265,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command) {
+		if (command){
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
+				if (location.modes?.find {it.name == value}) {
 					location.setMode(value)
 				}
-			} else if (command == "thermostatSetpoint") {
-				switch (device.currentThermostatMode) {
+			}else if (command == "thermostatSetpoint"){
+				switch(device.currentThermostatMode){
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -286,7 +290,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			} else if (!device) {
+			}else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -296,11 +300,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if (value.isNumber()) {
+				} else if(value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value) {
+				} else if (value){
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -322,19 +326,28 @@ private getLocationModeInfo() {
 //Map each device to a type given it's capabilities
 private getDeviceType(device) {
 	def deviceType
-	def caps = device.capabilities
-	log.debug "capabilities: [${device}, ${caps}]"
+	def capabilities = device.capabilities
+	log.debug "capabilities: [${device}, ${capabilities}]"
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-	caps.each {
-		switch (it.name.toLowerCase()) {
+
+	//Loop through the device capability list to determine the device type.
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
-				if (caps.any { it.name.toLowerCase() == "power meter" }) {
-					return deviceType
-				}
-				if (caps.any { it.name.toLowerCase() == "switch level" }) {
-					deviceType = "light"
-					return deviceType
+
+				//If the device also contains "Switch Level" capability, identify it as a "light" device.
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+
+					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
+					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+						deviceType = "dimmerSwitch"
+						return deviceType
+					} else {
+						deviceType = "light"
+						return deviceType
+					}
 				}
 				break
 			case "contact sensor":
@@ -375,16 +388,16 @@ private findDevice(deviceId) {
 
 //Return a list of device attributes
 private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute ->
+	device.supportedAttributes.collectEntries { attribute->
 		try {
-			[(attribute.name): device.currentValue(attribute.name)]
-		} catch (e) {
-			[(attribute.name): null]
+			[ (attribute.name): device.currentValue(attribute.name) ]
+		} catch(e) {
+			[ (attribute.name): null ]
 		}
 	}
 }
 
-//Map device command and value.
+//Map device command and value. 
 //input command and value are from UWP,
 //returns resultCommand and resultValue that corresponds with function and value in SmartApps
 private mapDeviceCommands(command, value) {
@@ -414,7 +427,7 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setSaturation"
 			resultValue = value
 			break
-		case "ct":
+		case "colorTemperature":
 			resultCommand = "setColorTemperature"
 			resultValue = value
 			break
@@ -451,7 +464,8 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -460,6 +474,5 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand, resultValue]
+	return [resultCommand,resultValue]
 }
-

smartapps/shabbatholidaymode/shabbat-and-holiday-modes.src/shabbat-and-holiday-modes.groovy

@@ -30,7 +30,7 @@ preferences {
 		input "havdalahOffset", "number", title: "Minutes After Sundown", required:true
 	} 
 	section("Your ZipCode") {
-		input "zipcode", "number", title: "ZipCode", required:true
+		input "zipcode", "text", title: "ZipCode", required:true
 	}
     section( "Notifications" ) {
         input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
@@ -205,4 +205,4 @@ if ( sendPushMessage != "No" ) {
         log.debug( "sending text message" )
         sendSms( phone, msg )
     }
-}//END def sendMessage(msg)
+}//END def sendMessage(msg)

smartapps/teapps/turn-off.src/turn-off.groovy

@@ -1,82 +0,0 @@
-/**
- *  Turn Off
- *
- *  Copyright 2017 Trevor
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Turn Off",
-    namespace: "TEAPPS",
-    author: "Trevor",
-    description: "Turn off a light after its been turned on.",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-	    
-    section("Lights") {
-    	input "lights", "capability.switch", required: true, title: "Which lights to turn off after being turned on?", multiple: true
-        input "offsetHours", "number", title: "How long until the light is turned off (hours)?"
-        input "offsetMinutes", "number", title: "How long until the light is turned off (minutes)?"
-        input "offsetSeconds", "number", title: "How long until the light is turned off (seconds)?"
-    }    
- 
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-    
-    //Subscribe to the light device being turned on
-    subscribe(lights, "switch.on", lightHandler)
-    
-
-}
-
-// TODO: implement event handlers
-def lightHandler(evt) {
-
-  if("on" == evt.value)
-    //Light was turned on
-    log.debug "Light is in ${evt.value} state"
-    
-    //Get the date and time
-    def currentTime = new Date()
-
-    //Calculate the offset
-    def timeToTurnOff = new Date(currentTime.time + (offsetHours * 60 * 60 * 1000) + (offsetMinutes * 60 * 1000) + (offsetSeconds * 1000))
-
-    log.debug "Scheduling for: $timeToTurnOff"
-
-    //Schedule this to run one time
-    runOnce(timeToTurnOff, turnOff)
-}
-
-def turnOff() {
-    log.debug "turning off lights"
-    lights.off()
-}