Merge pull request #1774 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -1,37 +0,0 @@
-# Aeon Siren
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Switch** - can detect state (possible values: on/off)
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs Siren (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -20,11 +20,10 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
-	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
  }
 
  simulator {
@@ -59,9 +58,6 @@ metadata {
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -152,10 +148,3 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.basicV1.basicGet())
-}

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -40,8 +40,7 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Health Check"
-    capability "Sensor"
-    
+
 		command    "resetParams2StDefaults"
 		command    "listCurrentParams"
 		command    "updateZwaveParam"

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -39,8 +39,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
-		capability "Sensor"
         
         command "enrollResponse"
 
@@ -32,8 +31,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
         
          valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -106,12 +106,6 @@ def parse(String description) {
 				}
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -112,12 +112,6 @@ def parse(String description) {
 				map = getMotionResult(value)
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 			}
 		}
 
@@ -95,12 +95,6 @@ def parse(String description) {
 				}
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -88,12 +88,6 @@ def parse(String description) {
 				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/zwave-device.src/zwave-device.groovy

@@ -33,7 +33,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -51,7 +51,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power") {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -38,8 +38,8 @@ metadata {
 	
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state("battery", label:'${currentValue}% battery', unit:"")

devicetypes/smartthings/zwave-sensor.src/zwave-sensor.groovy

@@ -32,8 +32,8 @@ metadata {
 
 	tiles {
 		standardTile("sensor", "device.sensor", width: 2, height: 2) {
-			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#cccccc")
-			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#00A0DC")
+			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#ffffff")
+			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -47,7 +47,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -46,7 +46,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -33,7 +33,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

smartapps/smartthings/laundry-monitor.src/laundry-monitor.groovy

@@ -179,4 +179,4 @@ private flashLights() {
 			delay += offFor
 		}
 	}
-}
+}