MSA-1848: Currently i have smart home installed and is working. I have installed Smart home in the smart things app but i cannot get either the washer or Dryer to install into smart things.

I am looking for some kind of device handler or even something I can manual add to my devices that will get this to work by design. Samsung just gives me the standard answers but still will not work.
Merge pull request #1793 from varzac/fix-open-close-temp-offset
2026-04-29 06:16:20 +01:00 · 2017-03-17 15:12:21 -07:00 · 2017-03-17 08:56:17 -05:00 · 2017-03-16 10:18:08 -07:00 · 2017-03-16 09:30:52 -05:00 · 2017-03-16 15:24:53 +05:30
19 changed files with 95 additions and 18 deletions
@@ -0,0 +1,2 @@
+.st-ignore
+README.md
@@ -0,0 +1,37 @@
+# Aeon Siren
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Switch** - can detect state (possible values: on/off)
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs Siren (Gen 5) is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)
@@ -20,10 +20,11 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
+	capability "Health Check"

 	command "test"

-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
 }

 simulator {
@@ -58,6 +59,9 @@ metadata {
 }

 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3

@@ -148,3 +152,10 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.basicV1.basicGet())
+}
@@ -40,7 +40,8 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Health Check"
-
+    capability "Sensor"
+    
 		command    "resetParams2StDefaults"
 		command    "listCurrentParams"
 		command    "updateZwaveParam"
@@ -39,8 +39,8 @@ metadata {

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -21,6 +21,7 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
+		capability "Sensor"
        
        command "enrollResponse"

@@ -31,8 +32,8 @@ metadata {

 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
        
         valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
@@ -24,6 +24,7 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"

 		command "enrollResponse"

@@ -106,6 +106,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
@@ -112,6 +112,12 @@ def parse(String description) {
 				map = getMotionResult(value)
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 			}
 		}

@@ -95,6 +95,12 @@ def parse(String description) {
 				}
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
@@ -88,6 +88,12 @@ def parse(String description) {
 				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 			}
 		}
+	} else if (map.name == "temperature") {
+		if (tempOffset) {
+			map.value = (int) map.value + (int) tempOffset
+		}
+		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
+		map.translatable = true
 	}

 	log.debug "Parse returned $map"
@@ -33,7 +33,7 @@ metadata {

 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.unknown.zwave.device", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.unknown.zwave.device", backgroundColor: "#ffffff"
 		}
 		standardTile("switchOn", "device.switch", inactiveLabel: false, decoration: "flat") {
@@ -51,7 +51,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power") {
@@ -38,8 +38,8 @@ metadata {
 	
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state("battery", label:'${currentValue}% battery', unit:"")
@@ -32,8 +32,8 @@ metadata {

 	tiles {
 		standardTile("sensor", "device.sensor", width: 2, height: 2) {
-			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#ffffff")
-			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#53a7c0")
+			state("inactive", label:'inactive', icon:"st.unknown.zwave.sensor", backgroundColor:"#cccccc")
+			state("active", label:'active', icon:"st.unknown.zwave.sensor", backgroundColor:"#00A0DC")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -47,7 +47,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}
@@ -46,7 +46,7 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 		}
@@ -33,7 +33,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -179,4 +179,4 @@ private flashLights() {
 			delay += offFor
 		}
 	}
-}
+}
Author	SHA1	Message	Date
Bryan Tuttle	34259d952a	MSA-1848: Currently i have smart home installed and is working. I have installed Smart home in the smart things app but i cannot get either the washer or Dryer to install into smart things. I am looking for some kind of device handler or even something I can manual add to my devices that will get this to work by design. Samsung just gives me the standard answers but still will not work.	2017-03-17 15:12:21 -07:00
Zach Varberg	f734c5490b	Merge pull request #1793 from varzac/fix-open-close-temp-offset [DVCSMP-2516] Properly handle tempOffset in smartsense sensors	2017-03-17 08:56:17 -05:00
Jack Chi	4dac7b5379	Merge pull request #1786 from skt123/aeon_siren [CHF-552] Implementation of Health Check for Aeon Siren.	2017-03-16 10:18:08 -07:00
Zach Varberg	a79d56e467	Properly handle tempOffset in smartsense sensors This was accidentally dropped as a part of the zigbee DTH cleanup that was done a while ago. This properly adjusts according to the offset. This resolves: https://smartthings.atlassian.net/browse/DVCSMP-2516	2017-03-16 09:30:52 -05:00
sushant.k1	1326881142	Implemented of Health Check for Aeon Siren.	2017-03-16 15:24:53 +05:30
Vinay Rao	be0c16c76d	Merge pull request #1782 from SmartThingsCommunity/staging Rolling down staging to master	2017-03-14 17:39:53 -07:00
Vinay Rao	89f1302c99	Merge pull request #1777 from jackchi/dth_ux_page15 Standardize Page 15 of DTH UX Improvements	2017-03-14 17:36:30 -07:00
Vinay Rao	16cb20685c	Merge pull request #1781 from SmartThingsCommunity/staging Rolling down staging to master	2017-03-14 17:33:04 -07:00
Vinay Rao	30d8e6d835	Merge branch 'master' into staging	2017-03-14 17:32:55 -07:00
jackchi	8a41fb6090	[DVCSMP-2510] Standardize Page 15 of DTH UX Improvements	2017-03-14 14:47:56 -07:00
Tyler Lange	2ae163b10b	Merge pull request #1764 from CosmicPuppy/ActionTiles-Fibaro-CapabilitySensorPatch To Fibaro Flood Sensor DTHs, added Capability "Sensor" per http://doc…	2017-03-13 10:27:41 -07:00
CosmicPuppy	e3168793bd	To Fibaro Flood Sensor DTHs, added Capability "Sensor" per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html?highlight=sensor%20actuator#actuator-and-sensor . There are some SmartApps out there using the "Actuator" and "Sensor" Capabilities and this Device doesn't show up for them (e.g., ActionTiles).	2017-03-11 00:47:36 -08:00
Tyler Lange	0baa986c61	Merge pull request #1762 from CosmicPuppy/ActionTiles-Nyce-CapabilitySensorPatch To Nyce sensor DTHs, added Capability "Sensor" per http://docs.smartt…	2017-03-09 12:53:49 -08:00
CosmicPuppy	8484f18a0e	To Nyce sensor DTHs, added Capability "Sensor" per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html?highlight=sensor%20actuator#actuator-and-sensor . There are some SmartApps out there using the "Actuator" and "Sensor" Capabilities and this Device doesn't show up for them (e.g., ActionTiles).	2017-03-09 00:05:14 -08:00