MSA-1830: Thermostat control

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -22,29 +22,28 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-		fingerprint mfr:"010F", prod:"0B01", model:"2002"
-		fingerprint mfr:"010F", prod:"0B01", model:"1002"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
 	}
 
 	simulator {
+    
 	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
-			}
-			
-			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
 				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
 				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}
-		}
-		
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -56,22 +55,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main "FGFS"
-		details(["FGFS","battery", "temperature"])
-	}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
 }
 
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-
-	if (description.startsWith("Err 106")) {
+    
+    if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -86,13 +85,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
 
-		if (cmd) {
-			log.debug "Parsed '${cmd}'"
-			zwaveEvent(cmd)
-		}
-	}
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
 }
 
 //security
@@ -109,7 +108,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -123,124 +122,105 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-	def cmds = []
-	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	// cmds << "delay 500"
-	cmds << encap(zwave.batteryV1.batteryGet())
-	[event, response(cmds)]
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-	log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
-	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
-		cmd.deviceIdData.each{ data ->
-			serialNumber += "${String.format("%02X", data)}"
-		}
-
-		updateDataValue("serialNumber", serialNumber)
-		log.debug "${device.displayName} - serial number: ${serialNumber}"
-	}
-
-	def response_cmds = []
-	if (!device.currentState("temperature")) {
-		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	}
-	if (!getDataValue("version") && !zwaveInfo.ver) {
-		log.debug "Requesting Version Report"
-		response_cmds << "delay 500"
-		response_cmds << encap(zwave.versionV1.versionGet())
-	}
-	response_cmds << "delay 1000"
-	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
-	[[:], response(response_cmds)]
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
-	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-	log.debug "applicationVersion:      ${cmd.applicationVersion}"
-	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-
-	result << createEvent(map)
-
-	if (!getDataValue("serialNumber")) {
-		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
-	} else {
-		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
-	}
-	result
+	map.displayed = true
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-	if (cmd.notificationType == 5) {
-		switch (cmd.event) {
-			case 2:
-				map.name = "water"
-				map.value = "wet"
-				map.descriptionText = "${device.displayName} is ${map.value}"
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
-			case 0:
-				map.name = "water"
-				map.value = "dry"
-				map.descriptionText = "${device.displayName} is ${map.value}"
-				break
-		}
-	} else if (cmd.notificationType == 7) {
-		switch (cmd.event) {
-			case 0:
-				map.name = "tamper"
-				map.value = "inactive"
-				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-
-			case 3:
-				map.name = "tamper"
-				map.value = "active"
-				map.descriptionText = "${device.displayName}: tamper alarm activated"
-				break
-		}
-	}
-
-	createEvent(map)
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-		// temperature
-		def cmdScale = cmd.scale == 1 ? "F" : "C"
-		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-		map.unit = getTemperatureScale()
-		map.name = "temperature"
-		map.displayed = true
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
 	}
-
-	createEvent(map)
+	
+    createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -249,18 +229,21 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
+	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-	// default initial state
-	sendEvent(name: "water", value: "dry")
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
 
-	def cmds = []
-
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
-
-	encapSequence(cmds, 200)
+	encapSequence(cmds, 500)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -269,7 +252,7 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-	"5601${cmd.format()}0000"
+    "5601${cmd.format()}0000"
 }
 
 private encapSequence(commands, delay=200) {
@@ -277,10 +260,13 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
-		// Secure inclusion failed
-		crc16(cmd)
-	} else {
-		secure(cmd)
-	}
-}
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -1,12 +1,12 @@
 /**
  *  Device Type Definition File
  *
- *  Device Type:        Fibaro Flood Sensor
- *  File Name:          fibaro-flood-sensor.groovy
- *  Initial Release:    2014-12-10
- *  @author:            Todd Wackford
- *  Email:              todd@wackford.net
- *  @version:           1.0
+ *  Device Type:		Fibaro Flood Sensor
+ *  File Name:			fibaro-flood-sensor.groovy
+ *	Initial Release:	2014-12-10
+ *	@author:			Todd Wackford
+ *  Email:				todd@wackford.net
+ *  @version:			1.0
  *
  *  Copyright 2014 SmartThings
  *
@@ -26,8 +26,8 @@
  * not displayed to the user. We do this so we can receive events and display on device 
  * activity. If the user wants to display the tamper tile, adjust the tile display lines
  * with the following:
- *      main(["water", "temperature", "tamper"])
- *      details(["water", "temperature", "battery", "tamper"])
+ *		main(["water", "temperature", "tamper"])
+ *		details(["water", "temperature", "battery", "tamper"])
  *
  * @param none
  *
@@ -40,16 +40,13 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Health Check"
-
-		command    "resetParams2StDefaults"
-		command    "listCurrentParams"
-		command    "updateZwaveParam"
-		command    "test"
-
+       
+        command		"resetParams2StDefaults"
+        command		"listCurrentParams"
+        command		"updateZwaveParam"
+        command		"test"
+        
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
-		fingerprint mfr:"010F", prod:"0000", model:"2002"
-		fingerprint mfr:"010F", prod:"0000", model:"1002"
-		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -90,9 +87,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-		standardTile("tamper", "device.tamper") {
-			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+        standardTile("tamper", "device.tamper") {
+			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -110,17 +107,26 @@ metadata {
 def parse(String description)
 {
 	def result = []
-
-	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
-
-	if (cmd) {
-		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
-	}
-
-	if ( result[0] != null ) {
+	
+    if (description == "updated") {
+    	if (!state.MSR) {
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
+			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		} 
+    } else {
+		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+    
+		if (cmd) {
+			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+		}
+    }
+    
+    result << response(zwave.batteryV1.batteryGet().format())
+    
+    if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-	}
+    }
 }
 
 
@@ -137,9 +143,10 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result << lateConfigure(true)
+		result += lateConfigure(true)
 	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+        log.debug "We're done with WakeUp!"
 	}
 	result
 }
@@ -147,7 +154,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-
+    
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -178,7 +185,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-
+    
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -193,49 +200,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	log.debug "BasicSet with CMD = ${cmd}"
-
-	if (!isConfigured()) {
-		def result = []
-		def map = [:]
-
-		map.name = "water"
+    log.debug "BasicSet with CMD = ${cmd}"
+    
+    if (!isConfigured()) {
+    	def result = []
+    	def map = [:]
+    
+    	map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-		result += lateConfigure(true)
-
-		result << createEvent(map)
-
-		result
-	}
+    
+    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+    	result += lateConfigure(true)
+    
+    	result << createEvent(map)
+        
+        result
+    }
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-
+    
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		log.debug "CMD = SensorAlarmReport: ${cmd}"
-		setConfigured()
-	} else if ( cmd.sensorType == 0) {
-		map.name = "tamper"
-		map.isStateChange = true
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
-	} else if ( cmd.sensorType == 1) {
-		map.name = "tamper"
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
+        
+        log.debug "CMD = SensorAlarmReport: ${cmd}"
+    	setConfigured()
+    } else if ( cmd.sensorType == 0) {
+    	map.name = "tamper"
+        map.isStateChange = true
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
+    } else if ( cmd.sensorType == 1) {
+    	map.name = "tamper"
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -244,10 +251,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 
 def resetTamper() {
 	def map = [:]
-	map.name = "tamper"
-	map.value = "secure"
-	map.descriptionText = "$device.displayName is secure"
-	sendEvent(map)
+    map.name = "tamper"
+    map.value = "secure"
+    map.descriptionText = "$device.displayName is secure"
+    sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -261,10 +268,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-
-	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-		result += lateConfigure(true)
-	}
+    
+    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+    	result += lateConfigure(true)
+    }
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -276,17 +283,17 @@ def setConfigured() {
 
 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-
-	return configured
+    
+    return configured
 }
 
 def lateConfigure(setConf = False) {
 	def res = response(configure())
-
-	if (setConf)
-		setConfigured()
-
-	return res
+    
+    if (setConf)
+        setConfigured()
+        
+    return res
 }
 
  /**
@@ -298,34 +305,29 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
-	// default initial state
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	// send associate to group 2 to get alarm data
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-
-	// send associate to group 3 to get sensor data reported only to hub
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-
-	// reporting frequency of temps and battery set to one hour
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    def cmds = []
+    
+    // send associate to group 2 to get alarm data
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
+    
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
+    
+    // send associate to group 3 to get sensor data reported only to hub
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// temp hysteresis set to .5 degrees celcius
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-
-	cmds << zwave.batteryV1.batteryGet().format()
-
-	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
 
+	// reporting frequency of temps and battery set to one hour
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    
+    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    
 	delayBetween(cmds, 100)
 }
 
@@ -351,18 +353,18 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
-		def pNumber = params.paramNumber
-		def pSize	= params.size
-		def pValue	= [params.value]
-		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+	if ( params ) {     
+        def pNumber = params.paramNumber
+        def pSize	= params.size
+        def pValue	= [params.value]
+        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
 
 		def cmds = []
-		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-		delayBetween(cmds, 1000)
-	}
+        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+        delayBetween(cmds, 1000)        
+    }
 }
 
  /**
@@ -379,26 +381,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
-
-	delayBetween(cmds, 1200)
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
+    
+    delayBetween(cmds, 1200)
 }
 
  /**
@@ -415,25 +417,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+    
 	delayBetween(cmds, 1200)
 }
 

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,169 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import groovy.transform.Field
-
-@Field Boolean hasConfiguredHealthCheck = false
-
-metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-        capability "Health Check"
-
-        attribute "colorName", "string"
-        command "setGenericName"
-
-        fingerprint profileId: "C05E", deviceId: "0220", inClusters: "0000, 0004, 0003, 0006, 0008, 0005, 0300", outClusters: "0019", manufacturer: "Eaton", model: "Halo_LT01", deviceJoinName: "Halo RL56 Wireless"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..5000)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        if (event.name == "colorTemperature") {
-            event.unit = "K"
-        }
-        sendEvent(event)
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
-    if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-    }
-    
-	cmds
-}
-
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return zigbee.levelRefresh()
-}
-
-def healthPoll() {
-    log.debug "healthPoll()"
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
-    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
-}
-
-def configureHealthCheck() {
-    Integer hcIntervalMinutes = 12
-    if (!hasConfiguredHealthCheck) {
-        log.debug "Configuring Health Check, Reporting"
-        unschedule("healthPoll")
-        runEvery5Minutes("healthPoll")
-        // Device-Watch allows 2 check-in misses from device
-        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-        hasConfiguredHealthCheck = true
-    }
-}
-
-def configure() {
-    log.debug "configure()"
-    configureHealthCheck()
-    // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def updated() {
-    log.debug "updated()"
-    configureHealthCheck()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = ""
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName, displayed: false)
-    }
-}

smartapps/foxtechnology/thermosmart.src/thermosmart.groovy

@@ -0,0 +1,130 @@
+/**
+ *  Copyright 2016 M. Fox
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Based on:
+ *  Keep Me Cozy
+ *  Author: SmartThings
+ */
+definition(
+    name: "Thermosmart",
+    namespace: "foxtechnology",
+    author: "M. Fox",
+    description: "V1.1n: Changes your thermostat settings automatically in response to a mode change. You can either SET the thermostate to your desired temperature or RESUME the regular schedule. ",
+    category: "Green Living",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/temp_thermo.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/temp_thermo@2x.png"
+)
+
+preferences {
+	 page(name: "setThermostat")
+}
+
+def setThermostat() {
+	dynamicPage(name: "setThermostat", title: null, install: true, uninstall: true) {
+ 
+		section{
+			input(name: "thermostats", type: "capability.thermostat", title: "Thermostats",
+            	description: null, multiple: true, required: true)
+        }
+        
+	    section{
+    	    input(name: "state", type: "enum", title: "State", 
+            	description: null, multiple: false, required: true, options: ["Set","Resume"], submitOnChange: true)
+	    }
+        
+        section {
+            label title: "Assign a name", required: false
+            mode title: "Set for specific mode(s)", required: true
+        }        
+        
+		if (settings.state == "Set") {
+			section {
+				input(name: "heatingSetpoint", type: "number", title: "Heating Setpoint Degrees?", required: true)
+            }
+            section {
+				input(name: "coolingSetpoint", type: "number", title: "Cooling Setpoint Degrees?", required: true) 
+			}
+		}
+	}
+}
+
+
+
+def installed()
+{
+	subscribe(thermostats, "heatingSetpoint", heatingSetpointHandler)
+	subscribe(thermostats, "coolingSetpoint", coolingSetpointHandler)
+	subscribe(thermostats, "temperature", temperatureHandler)
+	subscribe(location, changedLocationMode)
+	subscribe(app, appTouch)
+}
+
+def updated()
+{
+	unsubscribe()
+	subscribe(thermostats, "heatingSetpoint", heatingSetpointHandler)
+	subscribe(thermostats, "coolingSetpoint", coolingSetpointHandler)
+	subscribe(thermostats, "temperature", temperatureHandler)
+	subscribe(location, changedLocationMode)
+	subscribe(app, appTouch)
+}
+
+def heatingSetpointHandler(evt)
+{
+	log.debug "heatingSetpointHandler: $evt, $settings"
+}
+
+def coolingSetpointHandler(evt)
+{
+	log.debug "coolingSetpointHandler: $evt, $settings"
+}
+
+def temperatureHandler(evt)
+{
+	log.debug "TemperatureHandler: $evt, $settings"
+}
+
+def changedLocationMode(evt)
+{
+    if(settings.state == "Set")
+    {
+	  thermostats.setHeatingSetpoint(heatingSetpoint)
+	  thermostats.setCoolingSetpoint(coolingSetpoint)
+    }
+    else if (settings.state == "Resume") 
+    {
+      thermostats.resumeProgram()
+    }
+    
+}
+
+def appTouch(evt)
+{
+	log.debug "appTouch: $evt, $settings"
+    log.debug "Current state: $settings.state"
+    if(settings.state == "Set"){
+       settings.state = "Resume"
+       log.debug "setting state to Reset: $settings.state"
+    }
+    else {
+       settings.state = "Set"
+       log.debug "setting state to Set: $settings.state"
+    }
+  
+
+}
+
+// catchall
+def event(evt)
+{
+	log.debug "value: $evt.value, event: $evt, settings: $settings, handlerName: ${evt.handlerName}"
+}