MSA-1793: Hi,

We update the zwave version with our fingerprint data and we add the tamper alert.
Regards,
Andres V.

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
         mavenLocal()

devicetypes/besense/besense-door-window-sensor.src/besense-door-window-sensor.groovy

@@ -0,0 +1,256 @@
+/**
+ *  Besense z-wave Door/window sensor
+ */
+
+metadata {
+	definition (name: "BeSense Door/Window Sensor", namespace: "BeSense", author: "BeSense") {
+		capability "Contact Sensor"
+		capability "Sensor"
+		capability "Battery"
+		capability "Configuration"
+
+		fingerprint mfr: "0214", prod: "0002", model: "0001", deviceJoinName: "BeSense Door/window sensor" 
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "open":  "command: 2001, payload: FF"
+		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
+	}
+
+	// UI tile definitions
+	tiles(scale: 1) {
+		standardTile("contact", "device.contact", width: 3, height: 3, canChangeIcon: true) {
+			state ("open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ea0f46")
+			state ("closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#27CC73")
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main "contact"
+		details(["contact", "battery"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			log.debug description
+		} else {
+			result = createEvent(
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				isStateChange: true,
+			)
+		}
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	log.debug "parsed '$description' to $result"
+	return result
+}
+
+def updated() {
+	def cmds = []
+	if (!state.MSR) {
+		cmds = [
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			"delay 1200",
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		]
+	} else if (!state.lastbat) {
+		cmds = []
+	} else {
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+	}
+	response(cmds)
+}
+
+def configure() {
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
+	], 6000)
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
+{
+	sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	def cmds = []
+	if (!state.MSR) {
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 1200"
+	}
+	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
+		cmds << command(zwave.batteryV1.batteryGet())
+	} else {
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+	}
+	[event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbat = now()
+	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	retypeBasedOnMSR()
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
+		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	} else if (!device.currentState("battery")) {
+		if (msr == "0086-0102-0059") {
+			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
+		} else {
+			result << response(command(zwave.batteryV1.batteryGet()))
+		}
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	// log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def retypeBasedOnMSR() {
+	switch (state.MSR) {
+		case "0086-0002-002D":
+			log.debug "Changing device type to Z-Wave Water Sensor"
+			setDeviceType("Z-Wave Water Sensor")
+			break
+		case "011F-0001-0001":  // Schlage motion
+		case "014A-0001-0001":  // Ecolink motion
+		case "014A-0004-0001":  // Ecolink motion +
+		case "0060-0001-0002":  // Everspring SP814
+		case "0060-0001-0003":  // Everspring HSP02
+		case "011A-0601-0901":  // Enerwave ZWN-BPC
+        case "0214-0002-0002": // Besense pir or ceiling sensor
+			log.debug "Changing device type to Z-Wave Motion Sensor"
+			setDeviceType("Z-Wave Motion Sensor")
+			break
+		case "013C-0002-000D":  // Philio multi +
+			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
+			setDeviceType("3-in-1 Multisensor Plus (SG)")
+			break
+		case "0109-2001-0106":  // Vision door/window
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			break
+	}
+}

devicetypes/capabilities/acceleration-sensor-capability.src/acceleration-sensor-capability.groovy

@@ -23,8 +23,8 @@ metadata {
 
 	tiles {
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 		}
 
 		main "acceleration"

devicetypes/capabilities/contact-sensor-capability.src/contact-sensor-capability.groovy

@@ -23,8 +23,8 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 		}
 		main "contact"
 		details "contact"

devicetypes/capabilities/lock-capability.src/lock-capability.groovy

@@ -27,7 +27,7 @@ metadata {
 	tiles {
 		standardTile("toggle", "device.lock", width: 2, height: 2) {
 			state "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
-			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
+			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 		}
 		standardTile("lock", "device.lock", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'lock', action:"lock.lock", icon:"st.locks.lock.locked"

devicetypes/capabilities/momentary-capability.src/momentary-capability.groovy

@@ -29,7 +29,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 		}
 		main "switch"
 		details "switch"

devicetypes/capabilities/motion-sensor-capability.src/motion-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 		main "motion"
 		details "motion"

devicetypes/capabilities/presence-sensor-capability.src/presence-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2) {
 			state("not present", label:'not present', icon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
-			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#00A0DC")
+			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#53a7c0")
 		}
 		main "presence"
 		details "presence"

devicetypes/capabilities/switch-capability.src/switch-capability.groovy

@@ -31,7 +31,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 		}
 		main "switch"
 		details "switch"

devicetypes/capabilities/switch-level-capability.src/switch-level-capability.groovy

@@ -35,8 +35,8 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2) {
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#00A0DC"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
 			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 2, width: 1, inactiveLabel: false) {

devicetypes/capabilities/thermostat-capability.src/thermostat-capability.groovy

@@ -79,8 +79,8 @@ metadata {
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.emergencyHeat", backgroundColor:"#ffffff"
 			state "emergencyHeat", label:'${name}', action:"thermostat.heat", backgroundColor:"#e86d13"
-			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#e86d13"
-			state "cool", label:'${name}', action:"thermostat.off", backgroundColor:"#00A0DC"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffc000"
+			state "cool", label:'${name}', action:"thermostat.off", backgroundColor:"#269bd2"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"

devicetypes/capabilities/water-sensor-capability.src/water-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 
 		main "water"

devicetypes/com-obycode/beaconthing.src/beaconthing.groovy

@@ -37,7 +37,7 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#00A0DC")
+			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0")
 			state("not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
 		}
 		valueTile("inRange", "device.inRangeFriendly", inactiveLabel: true, height:1, width:3, decoration: "flat") {

devicetypes/com-obycode/obything-music.src/obything-music.groovy

@@ -38,7 +38,7 @@ metadata {
 		// Main
 		standardTile("main", "device.status", width: 1, height: 1, canChangeIcon: true) {
 			state "paused", label:'Paused', action:"music Player.play", icon:"st.Electronics.electronics19", nextState:"playing", backgroundColor:"#ffffff"
-			state "playing", label:'Playing', action:"music Player.pause", icon:"st.Electronics.electronics19", nextState:"paused", backgroundColor:"#00A0DC"
+			state "playing", label:'Playing', action:"music Player.pause", icon:"st.Electronics.electronics19", nextState:"paused", backgroundColor:"#79b821"
 		}
 
 		// Row 1

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -34,8 +34,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -44,7 +44,7 @@ metadata {
 			}  
         }
                 
-        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
         

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -31,8 +31,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -41,7 +41,7 @@ metadata {
 			}  
         }
                 
-        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
         

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -21,30 +21,28 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-		capability "Health Check"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-		fingerprint mfr:"010F", prod:"0B01", model:"2002"
-		fingerprint mfr:"010F", prod:"0B01", model:"1002"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
 	}
 
 	simulator {
+    
 	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
-			}
-			
-			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
-			}
-		}
-		
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -56,22 +54,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main "FGFS"
-		details(["FGFS","battery", "temperature"])
-	}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
 }
 
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-
-	if (description.startsWith("Err 106")) {
+    
+    if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -86,13 +84,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
 
-		if (cmd) {
-			log.debug "Parsed '${cmd}'"
-			zwaveEvent(cmd)
-		}
-	}
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
 }
 
 //security
@@ -109,7 +107,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -123,124 +121,105 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-	def cmds = []
-	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	// cmds << "delay 500"
-	cmds << encap(zwave.batteryV1.batteryGet())
-	[event, response(cmds)]
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-	log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
-	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
-		cmd.deviceIdData.each{ data ->
-			serialNumber += "${String.format("%02X", data)}"
-		}
-
-		updateDataValue("serialNumber", serialNumber)
-		log.debug "${device.displayName} - serial number: ${serialNumber}"
-	}
-
-	def response_cmds = []
-	if (!device.currentState("temperature")) {
-		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	}
-	if (!getDataValue("version") && !zwaveInfo.ver) {
-		log.debug "Requesting Version Report"
-		response_cmds << "delay 500"
-		response_cmds << encap(zwave.versionV1.versionGet())
-	}
-	response_cmds << "delay 1000"
-	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
-	[[:], response(response_cmds)]
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
-	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-	log.debug "applicationVersion:      ${cmd.applicationVersion}"
-	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-
-	result << createEvent(map)
-
-	if (!getDataValue("serialNumber")) {
-		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
-	} else {
-		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
-	}
-	result
+	map.displayed = true
+	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-	if (cmd.notificationType == 5) {
-		switch (cmd.event) {
-			case 2:
-				map.name = "water"
-				map.value = "wet"
-				map.descriptionText = "${device.displayName} is ${map.value}"
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
-			case 0:
-				map.name = "water"
-				map.value = "dry"
-				map.descriptionText = "${device.displayName} is ${map.value}"
-				break
-		}
-	} else if (cmd.notificationType == 7) {
-		switch (cmd.event) {
-			case 0:
-				map.name = "tamper"
-				map.value = "inactive"
-				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-
-			case 3:
-				map.name = "tamper"
-				map.value = "active"
-				map.descriptionText = "${device.displayName}: tamper alarm activated"
-				break
-		}
-	}
-
-	createEvent(map)
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-		// temperature
-		def cmdScale = cmd.scale == 1 ? "F" : "C"
-		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-		map.unit = getTemperatureScale()
-		map.name = "temperature"
-		map.displayed = true
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
 	}
-
-	createEvent(map)
+	
+    createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -249,18 +228,19 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
 
-	// default initial state
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
-
-	encapSequence(cmds, 200)
+	encapSequence(cmds, 500)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -269,7 +249,7 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-	"5601${cmd.format()}0000"
+    "5601${cmd.format()}0000"
 }
 
 private encapSequence(commands, delay=200) {
@@ -277,10 +257,13 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
-		// Secure inclusion failed
-		crc16(cmd)
-	} else {
-		secure(cmd)
-	}
-}
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
-		capability "Health Check"
         
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
@@ -39,8 +38,8 @@ metadata {
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
 			}  
         }
         
@@ -241,9 +240,7 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
+    
     def cmds = []
     
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -112,10 +112,10 @@ metadata {
 		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{
       		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
-      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#00A0DC", nextState:"Sent"
-            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC"
-            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ffffff", nextState:"Sent"
-            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffffff"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
             attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
             attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
             attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  

devicetypes/juano2310/jawbone-user.src/jawbone-user.groovy

@@ -24,7 +24,7 @@ metadata {
     tiles {
         standardTile("sleeping", "device.sleeping", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) {
             state("sleeping", label: "Sleeping", icon:"st.Bedroom.bedroom12", backgroundColor:"#ffffff")
-            state("not sleeping", label: "Awake", icon:"st.Health & Wellness.health12", backgroundColor:"#00A0DC")
+            state("not sleeping", label: "Awake", icon:"st.Health & Wellness.health12", backgroundColor:"#79b821")
         }
         standardTile("steps", "device.steps", width: 2, height: 2, canChangeIcon: false, canChangeBackground: false) {
             state("steps", label: '${currentValue} Steps', icon:"st.Health & Wellness.health11", backgroundColor:"#ffffff")                     

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -40,10 +40,10 @@ metadata {
     // UI tile definitions
     tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#00a0dc"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
             state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#e86d13"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
         }
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
             state "level", action:"switch level.setLevel"

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -122,13 +122,13 @@ metadata {
             state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
             state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
             state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
-            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#00A0DC"
+            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#52c435"
             state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
             state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
-            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#f2a51f"           
             state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
             state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
-            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#cccccc"
+            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#888888"
             state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
             state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
         }
@@ -144,67 +144,67 @@ metadata {
 		}    	
         standardTile("switch1", "device.switch1") {			
 			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch2", "device.switch2") {            
             state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
         standardTile("switch3", "device.switch3", inactiveLabel: false) {			
 			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch4", "device.switch4", inactiveLabel: false) {            
             state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch5", "device.switch5", inactiveLabel: false) {            
             state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
 		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
             state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch7", "device.switch7", inactiveLabel: false) {            
             state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
 		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
             state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch9", "device.switch9", inactiveLabel: false) {			
 			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch10", "device.switch10", inactiveLabel: false) {            
             state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
         standardTile("switch11", "device.switch11", inactiveLabel: false) {			
 			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch12", "device.switch12", inactiveLabel: false) {            
             state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch13", "device.switch13", inactiveLabel: false) {            
             state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
 		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
             state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
         standardTile("switch15", "device.switch15", inactiveLabel: false) {            
             state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}		
         standardTile("switch16", "device.switch16", inactiveLabel: false) {            
             state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
         standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", action: "refresh", icon:"st.secondary.refresh"            

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -22,7 +22,7 @@ metadata
     {
 		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
         {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#00a0dc"
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
 		}
         
     	def detailTiles = ["mainTile"]

devicetypes/smartthings/aeon-illuminator-module.src/aeon-illuminator-module.groovy

@@ -47,9 +47,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#00A0DC"
+			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
 			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 2, width: 1, inactiveLabel: false) {

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -37,14 +37,14 @@ metadata {
 	tiles {
 		standardTile("button", "device.button", width: 2, height: 2) {
 			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-			state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
-			state "button 2 pushed", label: "pushed #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
-			state "button 3 pushed", label: "pushed #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
-			state "button 4 pushed", label: "pushed #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
-			state "button 1 held", label: "held #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
-			state "button 2 held", label: "held #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
-			state "button 3 held", label: "held #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
-			state "button 4 held", label: "held #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
+			state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+			state "button 2 pushed", label: "pushed #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+			state "button 3 pushed", label: "pushed #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+			state "button 4 pushed", label: "pushed #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+			state "button 1 held", label: "held #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
+			state "button 2 held", label: "held #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
+			state "button 3 held", label: "held #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
+			state "button 4 held", label: "held #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/aeon-led-bulb.src/aeon-led-bulb.groovy

@@ -37,9 +37,9 @@ metadata {
 	}
 
 	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 	}
 	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -82,8 +82,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/aeon-multisensor-gen5.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor-gen5.src/README.md

@@ -1,43 +0,0 @@
-# Aeon Multisensor Gen5
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs MultiSensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/sensors/aeon-labs-multisensor-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Aeon Labs MultiSensor (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs MultiSensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-Aeon-Labs-MultiSensor-Gen-5-)

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,12 +20,10 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
-		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
 
 	simulator {
@@ -66,8 +64,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -100,11 +98,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description)
 {
 	def result = null
@@ -251,13 +244,6 @@ def configureAfterSecure() {
     secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -59,8 +59,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/aeon-outlet.src/aeon-outlet.groovy

@@ -45,7 +45,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("energy", "device.energy", decoration: "flat") {

devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy

@@ -53,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -1,37 +0,0 @@
-# Aeon Siren
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Switch** - can detect state (possible values: on/off)
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs Siren (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -20,11 +20,10 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
-	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
  }
 
  simulator {
@@ -59,9 +58,6 @@ metadata {
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -152,10 +148,3 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.basicV1.basicGet())
-}

devicetypes/smartthings/aeon-smartstrip.src/aeon-smartstrip.groovy

@@ -60,7 +60,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {
@@ -78,7 +78,7 @@ metadata {
 
 		(1..4).each { n ->
 			standardTile("switch$n", "switch$n", canChangeIcon: true) {
-				state "on", label: '${name}', action: "off$n", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+				state "on", label: '${name}', action: "off$n", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				state "off", label: '${name}', action: "on$n", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 			valueTile("power$n", "power$n", decoration: "flat") {

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles {
         standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
+            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
             state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
         }
         standardTile("beep", "device.beep", decoration: "flat") {
@@ -151,7 +151,7 @@ private handlePresenceEvent(present) {
 
 private startTimer() {
     log.debug "Scheduling periodic timer"
-    runEvery1Minute("checkPresenceCallback")
+    schedule("0 * * * * ?", checkPresenceCallback)
 }
 
 private stopTimer() {

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -42,8 +42,8 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -67,10 +67,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#00a0dc", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
         state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
         state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#00a0dc"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -55,13 +55,13 @@ metadata {
 			state "fanOn", label:'${name}', action:"thermostat.setThermostatFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#e86d13"
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', unit:"F", backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#00a0dc"
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#1e9cbb"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', unit:"F", backgroundColor:"#ffffff"

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -36,7 +36,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.Home.home30", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#79b821"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -43,9 +43,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -81,13 +81,13 @@ metadata {
 			state "fanCirculate", label:'${name}', action:"switchFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#e86d13"
+			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#00a0dc"
+			state "setCoolingSetpoint", action:"quickSetCool", backgroundColor: "#1e9cbb"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"

devicetypes/smartthings/danalock.src/danalock.groovy

@@ -33,10 +33,10 @@ metadata {
 
 	tiles {
 		standardTile("toggle", "device.lock", width: 2, height: 2) {
-			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00a0dc", nextState:"unlocking"
+			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
 			state "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 			state "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-			state "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#00a0dc"
+			state "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 			state "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 		}
 		standardTile("lock", "device.lock", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -7,8 +7,6 @@ Works with:
 * [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
 * [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
 * [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
-* [GE 1,000-Watt In-Wall Smart Dimmer Switch (GE 12725)](http://products.z-wavealliance.org/products/1198)
-* [GE In-Wall Smart Fan Control (GE 12730)](http://products.z-wavealliance.org/products/1202)
 
 ## Table of contents
 
@@ -29,7 +27,7 @@ Works with:
 
 ## Device Health
 
-Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In), 1000-watt In-Wall Smart Dimmer Switch and In-Wall Smart Fan Control are polled by the hub.
+Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In) are polled by the hub.
 As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
 Check-in interval = 32 mins.
 Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
@@ -46,6 +44,4 @@ Instructions related to pairing, resetting and removing the device from SmartThi
 * [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
 * [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
 * [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)
-* [GE 1,000-Watt In-Wall Smart Dimmer Switch (GE 12725) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200879274)
-* [GE In-Wall Smart Fan Control (GE 12730) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200879274)
+* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -54,9 +54,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -47,8 +47,8 @@ metadata {
 		}
 
 		standardTile("motion", "device.motion") {
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -53,7 +53,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#00a0dc"
+			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
 			state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
 		}
         valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -33,7 +33,7 @@ metadata {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
+				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy

@@ -56,9 +56,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -1,12 +1,12 @@
 /**
  *  Device Type Definition File
  *
- *  Device Type:        Fibaro Flood Sensor
- *  File Name:          fibaro-flood-sensor.groovy
- *  Initial Release:    2014-12-10
- *  @author:            Todd Wackford
- *  Email:              todd@wackford.net
- *  @version:           1.0
+ *  Device Type:		Fibaro Flood Sensor
+ *  File Name:			fibaro-flood-sensor.groovy
+ *	Initial Release:	2014-12-10
+ *	@author:			Todd Wackford
+ *  Email:				todd@wackford.net
+ *  @version:			1.0
  *
  *  Copyright 2014 SmartThings
  *
@@ -26,8 +26,8 @@
  * not displayed to the user. We do this so we can receive events and display on device 
  * activity. If the user wants to display the tamper tile, adjust the tile display lines
  * with the following:
- *      main(["water", "temperature", "tamper"])
- *      details(["water", "temperature", "battery", "tamper"])
+ *		main(["water", "temperature", "tamper"])
+ *		details(["water", "temperature", "battery", "tamper"])
  *
  * @param none
  *
@@ -39,18 +39,13 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Configuration"
 		capability "Battery"
-		capability "Health Check"
-    capability "Sensor"
-    
-		command    "resetParams2StDefaults"
-		command    "listCurrentParams"
-		command    "updateZwaveParam"
-		command    "test"
-
+       
+        command		"resetParams2StDefaults"
+        command		"listCurrentParams"
+        command		"updateZwaveParam"
+        command		"test"
+        
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
-		fingerprint mfr:"010F", prod:"0000", model:"2002"
-		fingerprint mfr:"010F", prod:"0000", model:"1002"
-		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -77,7 +72,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -91,9 +86,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-		standardTile("tamper", "device.tamper") {
-			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
+        standardTile("tamper", "device.tamper") {
+			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -111,17 +106,26 @@ metadata {
 def parse(String description)
 {
 	def result = []
-
-	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
-
-	if (cmd) {
-		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
-	}
-
-	if ( result[0] != null ) {
+	
+    if (description == "updated") {
+    	if (!state.MSR) {
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
+			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		} 
+    } else {
+		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+    
+		if (cmd) {
+			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+		}
+    }
+    
+    result << response(zwave.batteryV1.batteryGet().format())
+    
+    if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-	}
+    }
 }
 
 
@@ -138,9 +142,10 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result << lateConfigure(true)
+		result += lateConfigure(true)
 	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+        log.debug "We're done with WakeUp!"
 	}
 	result
 }
@@ -148,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-
+    
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -179,7 +184,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-
+    
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -194,49 +199,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	log.debug "BasicSet with CMD = ${cmd}"
-
-	if (!isConfigured()) {
-		def result = []
-		def map = [:]
-
-		map.name = "water"
+    log.debug "BasicSet with CMD = ${cmd}"
+    
+    if (!isConfigured()) {
+    	def result = []
+    	def map = [:]
+    
+    	map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-		result += lateConfigure(true)
-
-		result << createEvent(map)
-
-		result
-	}
+    
+    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+    	result += lateConfigure(true)
+    
+    	result << createEvent(map)
+        
+        result
+    }
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-
+    
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
-		log.debug "CMD = SensorAlarmReport: ${cmd}"
-		setConfigured()
-	} else if ( cmd.sensorType == 0) {
-		map.name = "tamper"
-		map.isStateChange = true
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
-	} else if ( cmd.sensorType == 1) {
-		map.name = "tamper"
-		map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
-
+        
+        log.debug "CMD = SensorAlarmReport: ${cmd}"
+    	setConfigured()
+    } else if ( cmd.sensorType == 0) {
+    	map.name = "tamper"
+        map.isStateChange = true
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
+    } else if ( cmd.sensorType == 1) {
+    	map.name = "tamper"
+        map.value = cmd.sensorState ? "tampered" : "secure"
+        map.descriptionText = "${device.displayName} has been tampered with"
+        runIn(30, "resetTamper") //device does not send alarm cancelation
+        
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -245,10 +250,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 
 def resetTamper() {
 	def map = [:]
-	map.name = "tamper"
-	map.value = "secure"
-	map.descriptionText = "$device.displayName is secure"
-	sendEvent(map)
+    map.name = "tamper"
+    map.value = "secure"
+    map.descriptionText = "$device.displayName is secure"
+    sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -262,10 +267,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-
-	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-		result += lateConfigure(true)
-	}
+    
+    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+    	result += lateConfigure(true)
+    }
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -277,17 +282,17 @@ def setConfigured() {
 
 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-
-	return configured
+    
+    return configured
 }
 
 def lateConfigure(setConf = False) {
 	def res = response(configure())
-
-	if (setConf)
-		setConfigured()
-
-	return res
+    
+    if (setConf)
+        setConfigured()
+        
+    return res
 }
 
  /**
@@ -299,34 +304,26 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	// default initial state
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	// send associate to group 2 to get alarm data
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-
-	// send associate to group 3 to get sensor data reported only to hub
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-
-	// reporting frequency of temps and battery set to one hour
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    def cmds = []
+    
+    // send associate to group 2 to get alarm data
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
+    
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
+    
+    // send associate to group 3 to get sensor data reported only to hub
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// temp hysteresis set to .5 degrees celcius
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-
-	cmds << zwave.batteryV1.batteryGet().format()
-
-	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
 
+	// reporting frequency of temps and battery set to one hour
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    
+    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    
 	delayBetween(cmds, 100)
 }
 
@@ -352,18 +349,18 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
-		def pNumber = params.paramNumber
-		def pSize	= params.size
-		def pValue	= [params.value]
-		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+	if ( params ) {     
+        def pNumber = params.paramNumber
+        def pSize	= params.size
+        def pValue	= [params.value]
+        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
 
 		def cmds = []
-		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-		delayBetween(cmds, 1000)
-	}
+        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+        delayBetween(cmds, 1000)        
+    }
 }
 
  /**
@@ -380,26 +377,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
-
-	delayBetween(cmds, 1200)
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
+    
+    delayBetween(cmds, 1200)
 }
 
  /**
@@ -416,25 +413,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+    
 	delayBetween(cmds, 1200)
 }
 

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -46,7 +46,6 @@
 		capability 	"Illuminance Measurement"
 		capability 	"Sensor"
 		capability 	"Battery"
-		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -82,8 +81,8 @@
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -126,9 +125,6 @@
  */
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
     
     // send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -89,9 +89,9 @@
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
 		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        	state "on", label:'${name}', action:"switch.off", icon:"st.illuminance.illuminance.bright", backgroundColor:"#00A0DC", nextState:"turningOff"
+        	state "on", label:'${name}', action:"switch.off", icon:"st.illuminance.illuminance.bright", backgroundColor:"#79b821", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.illuminance.illuminance.dark", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', icon:"st.illuminance.illuminance.bright", backgroundColor:"#00A0DC"
+            state "turningOn", label:'${name}', icon:"st.illuminance.illuminance.bright", backgroundColor:"#79b821"
             state "turningOff", label:'${name}', icon:"st.illuminance.illuminance.dark", backgroundColor:"#ffffff"
         }
         valueTile("power", "device.power", decoration: "flat") {

devicetypes/smartthings/fortrezz-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/fortrezz-water-valve.src/README.md

@@ -1,39 +0,0 @@
-# FortrezZ Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Water Valve](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-FortrezZ Water Valve is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Water Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088434-FortrezZ-Water-Valve-Shutoff)

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -14,13 +14,11 @@
 metadata {
 	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
         
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
-		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
 
 	// simulator metadata
@@ -36,10 +34,10 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#ffe71e"
+			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffe71e"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
@@ -50,11 +48,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	log.trace description
 	def result = null
@@ -83,13 +76,6 @@ def close() {
 	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }

devicetypes/smartthings/foscam.src/foscam.groovy

@@ -41,7 +41,7 @@
 
 		standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
 			state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
-			state "taking", label:'Taking', action: "", icon: "st.camera.dropcam", backgroundColor: "#00A0DC"
+			state "taking", label:'Taking', action: "", icon: "st.camera.dropcam", backgroundColor: "#53a7c0"
 			state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
 		}
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -61,9 +61,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/gentle-wake-up-controller.src/gentle-wake-up-controller.groovy

@@ -31,7 +31,7 @@ metadata {
             tileAttribute("sessionStatus", key: "PRIMARY_CONTROL") {
                 attributeState "cancelled", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "running"
                 attributeState "stopped", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "cancelled"
-                attributeState "running", action: "timed session.stop", icon: "http://f.cl.ly/items/0B3y3p2V3X2l3P3y3W09/stopbutton.png", backgroundColor: "#00A0DC", nextState: "cancelled"
+                attributeState "running", action: "timed session.stop", icon: "http://f.cl.ly/items/0B3y3p2V3X2l3P3y3W09/stopbutton.png", backgroundColor: "#79b821", nextState: "cancelled"
             }
             tileAttribute("timeRemaining", key: "SECONDARY_CONTROL") {
                 attributeState "timeRemaining", label:'${currentValue} remaining'
@@ -45,7 +45,7 @@ metadata {
         standardTile("sessionStatusTile", "sessionStatus", width: 1, height: 1, canChangeIcon: true) {
             state "cancelled", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
             state "stopped", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
-            state "running", label: "Running", action: "timed session.stop", backgroundColor: "#00A0DC", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
+            state "running", label: "Running", action: "timed session.stop", backgroundColor: "#79b821", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
         }
 
         // duration

devicetypes/smartthings/harmony-activity.src/harmony-activity.groovy

@@ -32,7 +32,7 @@ metadata {
 	tiles {
 		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: 'Off', action: "switch.on", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: 'On', action: "switch.off", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#00A0DC", nextState: "off"
+			state "on", label: 'On', action: "switch.off", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#79b821", nextState: "off"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -39,8 +39,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -31,9 +31,9 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -58,7 +58,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,7 +7,6 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Bridge"
 		capability "Health Check"
 
 		attribute "networkAddress", "string"
@@ -27,7 +26,7 @@ metadata {
      	multiAttributeTile(name:"rich-control"){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
 				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
-	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#00A0DC"
+	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
 			}
 		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
@@ -46,7 +45,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -32,9 +32,9 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -67,7 +67,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -27,9 +27,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
               attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
               attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -51,7 +51,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -28,9 +28,9 @@ metadata {
     tiles (scale: 2){
         multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -56,7 +56,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}")
 }
 
 // parse events into attributes

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -29,7 +29,7 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#00A0DC")
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
 			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ffffff")
 		}
 

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -24,9 +24,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -23,9 +23,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -54,11 +54,11 @@ metadata {
 	// UI tile definitions 
 	tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "doorClosed", label: "Closed", action: "on", icon: "st.doors.garage.garage-closed", backgroundColor: "#00A0DC"
-            state "doorOpen", label: "Open", action: "on", icon: "st.doors.garage.garage-open", backgroundColor: "#e86d13"
-            state "doorOpening", label: "Opening", action: "on", icon: "st.doors.garage.garage-opening", backgroundColor: "#e86d13"
-            state "doorClosing", label: "Closing", action: "on", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC"
-            state "on", label: "Actuate", action: "off", icon: "st.doors.garage.garage-closed", backgroundColor: "#00A0DC"
+			state "doorClosed", label: "Closed", action: "on", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
+            state "doorOpen", label: "Open", action: "on", icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
+            state "doorOpening", label: "Opening", action: "on", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e"
+            state "doorClosing", label: "Closing", action: "on", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e"
+            state "on", label: "Actuate", action: "off", icon: "st.doors.garage.garage-closed", backgroundColor: "#53a7c0"
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
         }
         standardTile("contact", "device.contact", inactiveLabel: false) {

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -27,8 +27,8 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#00A0DC")
-			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ffffff")
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
 		}
 		main "presence"
 		details "presence"

devicetypes/smartthings/momentary-button-tile.src/momentary-button-tile.groovy

@@ -32,7 +32,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: 'Push', action: "momentary.push", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: 'Push', action: "momentary.push", backgroundColor: "#00A0DC"
+			state "on", label: 'Push', action: "momentary.push", backgroundColor: "#53a7c0"
 		}
 		main "switch"
 		details "switch"

devicetypes/smartthings/motion-detector.src/motion-detector.groovy

@@ -28,8 +28,8 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
 
 		main "motion"

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
-		capability "Sensor"
         
         command "enrollResponse"
 
@@ -32,8 +31,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
 		}
         
          valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -42,8 +41,8 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {

devicetypes/smartthings/on-off-button-tile.src/on-off-button-tile.groovy

@@ -31,7 +31,7 @@ metadata {
 	tiles {
 		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState: "off"
+			state "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "off"
 		}
 		main "button"
 		details "button"

devicetypes/smartthings/on-off-shield.src/on-off-shield.groovy

@@ -31,7 +31,7 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -29,8 +29,8 @@ metadata {
 	// UI tile definitions
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 		}
 
 		main "contact"

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -37,9 +37,9 @@ metadata {
 	}
 
 	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 	}
 	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/secure-dimmer.src/secure-dimmer.groovy

@@ -42,9 +42,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-ZHAC"
 
@@ -80,8 +79,7 @@ def parse(String description) {
 		*/
 		event.value = event.value / 10
 	}
-
-	return event ? createEvent(event) : event
+	return event
 }
 
 def setLevel(value) {

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -4,7 +4,6 @@ metadata {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"
-		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
 	}
@@ -24,7 +23,7 @@ metadata {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			}
 		}
 		main "switch"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -56,9 +56,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState: "turningOff"
+				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState: "turningOff"
+				attributeState "turningOn", label: 'Turning On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
 				attributeState "turningOff", label: 'Turning Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute("power", key: "SECONDARY_CONTROL") {
@@ -83,8 +83,9 @@ def parse(String description) {
 
 	if (event) {
 		if (event.name == "power") {
-			def value = (event.value as Integer) / 10
-			event = createEvent(name: event.name, value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true)
+			event.value = event.value / 10
+			event.descriptionText = '{{ device.displayName }} power is {{ value }} Watts'
+			event.translatable = true
 		} else if (event.name == "switch") {
 			def descriptionText = event.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			event = createEvent(name: event.name, value: event.value, descriptionText: descriptionText, translatable: true)
@@ -105,7 +106,7 @@ def parse(String description) {
 			log.debug "${cluster}"
 		}
 	}
-	return event ? createEvent(event) : event
+	return event
 }
 
 def off() {

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -50,18 +50,18 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "closed", label:'${name}', icon:"st.doors.garage.garage-closed", backgroundColor:"#00A0DC", nextState:"opening"
-				attributeState "open", label:'${name}', icon:"st.doors.garage.garage-open", backgroundColor:"#e86d13", nextState:"closing"
-				attributeState "opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#e86d13"
-				attributeState "closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC"
+				attributeState "closed", label:'${name}', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening"
+				attributeState "open", label:'${name}', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing"
+				attributeState "opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e"
+				attributeState "closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", decoration: "flat", width: 2, height: 2) {

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -50,17 +50,17 @@ metadata {
 
 	tiles {
 		standardTile("status", "device.status", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.doors.garage.garage-closed", action: "actuate", backgroundColor:"#00A0DC", nextState:"opening")
-			state("open", label:'${name}', icon:"st.doors.garage.garage-open", action: "actuate", backgroundColor:"#e86d13", nextState:"closing")
-			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#e86d13")
-			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
+			state("closed", label:'${name}', icon:"st.doors.garage.garage-closed", action: "actuate", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', icon:"st.doors.garage.garage-open", action: "actuate", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
 		}
 		standardTile("contact", "device.contact") {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", decoration: "flat") {

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-L", deviceJoinName: "Iris Smart Water Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3315-G", deviceJoinName: "Centralite Water Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
 
@@ -59,7 +58,7 @@ metadata {
 		multiAttributeTile(name: "water", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", label: "Dry", icon: "st.alarm.water.dry", backgroundColor: "#ffffff"
-				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#00A0DC"
+				attributeState "wet", label: "Wet", icon: "st.alarm.water.wet", backgroundColor: "#53a7c0"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -107,12 +106,6 @@ def parse(String description) {
 				}
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -37,13 +37,13 @@ metadata {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
 			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
-			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#00A0DC"
-			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#e86d13"
+			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
+			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
             state("temperature", label:'${currentValue}°',

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -34,9 +34,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3328-G", deviceJoinName: "Centralite Micro Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv5", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -109,16 +107,10 @@ def parse(String description) {
 				}
 			} else if (descMap.clusterInt == 0x0406 && descMap.attrInt == 0x0000) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
-				log.debug "Doing a read attr motion event"
-				map = getMotionResult(value)
+				log.warn "Doing a read attr motion event"
+				resultMap = getMotionResult(value)
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -30,8 +30,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
@@ -77,15 +76,15 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "status", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc"
-				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#e86d13"
-				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#00a0dc"
+				attributeState "open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+				attributeState "garage-open", label: 'Open', icon: "st.doors.garage.garage-open", backgroundColor: "#ffa81e"
+				attributeState "garage-closed", label: 'Closed', icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821"
 			}
 		}
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#e86d13")
-			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
+			state("open", label: 'Open', icon: "st.contact.contact.open", backgroundColor: "#ffa81e")
+			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
 			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -52,14 +52,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"##e86d13"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc"
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
 			}
 		}
 
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°',

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -45,8 +45,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 			}
 		}
 
@@ -95,12 +95,6 @@ def parse(String description) {
 				}
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -88,12 +88,6 @@ def parse(String description) {
 				log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 			}
 		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
 	}
 
 	log.debug "Parse returned $map"

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -51,12 +51,12 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration") {
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 		valueTile("temperature", "device.temperature") {
 			state("temperature", label:'${currentValue}°',

devicetypes/smartthings/spark.src/spark.groovy

@@ -20,7 +20,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -36,7 +36,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 2, width: 1, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -28,8 +28,8 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
 		}
 		main "contact"
 		details "contact"

devicetypes/smartthings/testing/simulated-garage-door-opener.src/simulated-garage-door-opener.groovy

@@ -29,10 +29,10 @@ metadata {
 
 	tiles {
 		standardTile("toggle", "device.door", width: 2, height: 2) {
-			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#00A0DC", nextState:"opening")
-			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#e86d13", nextState:"closing")
-			state("opening", label:'${name}', icon:"st.doors.garage.garage-closed", backgroundColor:"#e86d13")
-			state("closing", label:'${name}', icon:"st.doors.garage.garage-open", backgroundColor:"#00A0DC")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-closed", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-open", backgroundColor:"#ffe71e")
 			
 		}
 		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -23,7 +23,7 @@ metadata {
 	tiles {
 		standardTile("toggle", "device.lock", width: 2, height: 2) {
 			state "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
-			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
+			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 		}
 		standardTile("lock", "device.lock", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'lock', action:"lock.lock", icon:"st.locks.lock.locked"