Merge pull request #1874 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/README.md

@@ -0,0 +1,41 @@
+# Fibaro Door Window Sensor ZW5
+
+Cloud Execution
+
+Works with: 
+
+* [Fibaro Door/Window Sensor ZW5](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Contact Sensor** - can detect contact (possible values: open,closed)
+* **Sensor** - detects sensor events
+* **Tamper Alert** - detects tampers
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Fibaro Door/Window Sensor ZW5 is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+One 1/2AA 3.6V battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Fibaro Door/Window Sensor ZW5 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
+		capability "Health Check"
 
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
 	}
@@ -199,7 +200,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-    
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
     def cmds = []
     
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -34,13 +34,13 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
 			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#00a0dc")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#e86d13")
+				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
+				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
 			}
 			
 			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
+				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
 			}
 		}
 		

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,7 +11,7 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
-        capability "Health Check"
+        // capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -22,7 +22,6 @@ metadata {
         command "clearObstruction"
 
         fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019"
-        fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019", manufacturer: "Keen Home Inc", model: "SV01-410-DV-1.0", deviceJoinName: "Keen Home Smart Vent"
     }
 
     // simulator metadata
@@ -477,7 +476,7 @@ def configure() {
 
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    // sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -32,7 +32,7 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
+		attribute "displayThermostatSetpoint", "string" // Added to be able to show "Auto"/"Off" keeping attribute thermostatSetpoint a number
 		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
@@ -43,8 +43,8 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
+		standardTile("temperature", "device.temperature", width: 2, height: 2, decoration: "flat") {
+			state("temperature", label:'${currentValue}°', unit:"F", icon: "st.thermostat.ac.air-conditioning",
 					backgroundColors:[
 							// Celsius
 							[value: 0, color: "#153591"],
@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -81,8 +81,8 @@ metadata {
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("displayThermostatSetpoint", "device.displayThermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "displayThermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
@@ -113,7 +113,7 @@ metadata {
 			state "humidity", label:'${currentValue}%'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "displayThermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}
 
 	preferences {
@@ -185,6 +185,11 @@ def generateEvent(Map results) {
 				isChange = isStateChange(device, name, value.toString())
 				event['isStateChange'] = isChange
 				event['displayed'] = false
+			} else if (name == "thermostatMode") {
+				def mode = value.toString()
+				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
+				isChange = isStateChange(device, name, mode)
+				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
 			} else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -452,10 +457,10 @@ def emergencyHeat() {
 }
 
 def auxHeatOnly() {
-	log.debug "auxHeatOnly"
+	log.debug "auxHeatOnly = emergency heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxHeatOnly")
+		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -574,17 +579,23 @@ def generateSetpointEvent() {
 	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
+	def averageSetpoint = roundC((heatingSetpoint + coolingSetpoint) / 2)
 	if (mode == "heat") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 	else if (mode == "cool") {
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale, displayed: false)
 	} else if (mode == "auto") {
-		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Auto", displayed: false)
 	} else if (mode == "off") {
-		sendEvent("name":"thermostatSetpoint", "value":"Off")
-	} else if (mode == "auxHeatOnly") {
+		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
+		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
 }
 
@@ -621,13 +632,14 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -666,13 +678,14 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
+		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -706,7 +719,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
+		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -735,15 +748,18 @@ void alterSetpoint(temp) {
 
 		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "displayThermostatSetpoint", "value": temp.value, displayed: false)
 			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
 			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
+			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			}
 		}
 
@@ -759,6 +775,7 @@ def generateStatusEvent() {
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
 	def statusText
+	def operatingState = "idle"
 
 	log.debug "Generate Status Event for Mode = ${mode}"
 	log.debug "Temperature = ${temperature}"
@@ -767,20 +784,29 @@ def generateStatusEvent() {
 	log.debug "HVAC Mode = ${mode}"
 
 	if (mode == "heat") {
-		if (temperature >= heatingSetpoint)
+		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+			operatingState = "heating"
+		}
 	} else if (mode == "cool") {
-		if (temperature <= coolingSetpoint)
+		if (temperature <= coolingSetpoint) {
 			statusText = "Right Now: Idle"
-		else
+		} else {
 			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
+			operatingState = "cooling"
+		}
 	} else if (mode == "auto") {
 		statusText = "Right Now: Auto"
+		if (temperature < heatingSetpoint) {
+			operatingState = "heating"
+		} else if (temperature > coolingSetpoint) {
+			operatingState = "cooling"
+		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "auxHeatOnly") {
+	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
 		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
@@ -788,6 +814,7 @@ def generateStatusEvent() {
 
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
+	sendEvent("name":"thermostatOperatingState", "value":operatingState, "description":operatingState, displayed: false)
 }
 
 def generateActivityFeedsEvent(notificationMessage) {

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,13 +26,13 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
-		capability "Health Check"
+		// capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
-		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
+		// fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -88,7 +88,7 @@ def parse(String description) {
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 

devicetypes/smartthings/everspring-flood-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/everspring-flood-sensor.src/README.md

@@ -0,0 +1,40 @@
+# Everspring Flood Sensor
+
+Cloud Execution
+
+Works with: 
+
+* [Everspring Water Detector](https://www.smartthings.com/works-with-smartthings/sensors/everspring-water-detector)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Water Sensor** - can detect presence of water (dry or wet)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Everspring Water Detector is a Z-wave sleepy device and wakes up every 4 hours.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
+
+* __482min__ checkInterval
+
+## Battery Specification
+
+Three AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Everspring Water Detector Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088304-Everspring-Water-Detector)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0xA102", inClusters: "0x86,0x72,0x85,0x84,0x80,0x70,0x9C,0x20,0x71"
 	}
@@ -138,6 +139,8 @@ def zwaveEvent(physicalgraph.zwave.Command cmd)
 
 def configure()
 {
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	if (!device.currentState("battery")) {
 		sendEvent(name: "battery", value:100, unit:"%", descriptionText:"(Default battery event)", displayed:false)
 	}

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -7,7 +7,6 @@ metadata {
 	definition (name: "Logitech Harmony Hub C2C", namespace: "smartthings", author: "SmartThings") {
 		capability "Media Controller"
         capability "Refresh"
-		capability "Health Check"
         
         command "activityoff"   
         command "alloff" 
@@ -39,16 +38,6 @@ metadata {
 	}
 }
 
-def installed() {
-	log.debug "installed()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
-}
-
-def updated() {
-	log.debug "updated()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
-}
-
 def startActivity(String activityId) {
 	log.debug "Executing 'Start Activity'"
 	log.trace parent.activity("$device.deviceNetworkId-$activityId","start")    
@@ -69,10 +58,6 @@ def poll() {
 	log.trace parent.poll()
 }
 
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "Executing 'Refresh'"
 	log.trace parent.poll()

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -18,7 +18,7 @@
 
 
 metadata {
-	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Wemo Light Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Polling"

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -16,7 +16,7 @@
  * Date: 2015-10-11
  */
  metadata {
- 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.smartplug") {
         capability "Actuator"
         capability "Switch"
         capability "Polling"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zooz-power-strip.src/zooz-power-strip.groovy

@@ -25,6 +25,7 @@ metadata {
 		capability "Refresh"
 		capability "Actuator"
 		capability "Sensor"
+		capability "Configuration"
 
 		fingerprint manufacturer: "015D", prod: "0651", model: "F51C", deviceJoinName: "Zooz ZEN 20 Power Strip"
 	}
@@ -65,6 +66,10 @@ def updated() {
 	}
 }
 
+def configure() {
+	refresh()
+}
+
 
 //////////////////////
 // Event Generation //
@@ -107,15 +112,17 @@ def zwaveBinaryEvent(cmd, endpoint) {
 	def result = []
 	def children = childDevices
 	def childDevice = children.find{it.deviceNetworkId.endsWith("$endpoint")}
-	childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+	if (childDevice) {
+		childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
 
-	if (cmd.value) {
-		// One on and the strip is on
-		result << createEvent(name: "switch", value: "on")
-	} else {
-		// All off and the strip is off
-		if (! children.any { it.currentValue("switch") == "on" }) {
-			result  << createEvent(name: "switch", value: "off")
+		if (cmd.value) {
+			// One on and the strip is on
+			result << createEvent(name: "switch", value: "on")
+		} else {
+			// All off and the strip is off
+			if (!children.any { it.currentValue("switch") == "on" }) {
+				result << createEvent(name: "switch", value: "off")
+			}
 		}
 	}
 	result

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Metering Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Energy Meter"
 		capability "Actuator"
 		capability "Switch"
@@ -27,7 +27,7 @@ metadata {
 		command "reset"
 
 		fingerprint inClusters: "0x25,0x32"
-		fingerprint mfr:"0086", prod:"0003", model:"0012", deviceJoinName: "Aeon Labs Micro Smart Switch 2E"
+		fingerprint mfr:"0086", prod:"0003", model:"0012", deviceJoinName: "Aeon Labs Micro Smart Switch"
 	}
 
 	// simulator metadata
@@ -86,7 +86,7 @@ def updated() {
 
 def parse(String description) {
 	def result = null
-	if(description == "updated") return 
+	if(description == "updated") return
 	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
 	if (cmd) {
 		result = zwaveEvent(cmd)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Health Check"
  		capability "Switch"

devicetypes/smartthings/zwave-switch-secure.src/zwave-switch-secure.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch Secure", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch"
 		capability "Refresh"
 		capability "Polling"

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Actuator"
 		capability "Indicator"
  		capability "Switch"

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -42,9 +42,9 @@ metadata {
 		status "auto"			: "command: 4003, payload: 03"
 		status "emergencyHeat"	: "command: 4003, payload: 04"
 
-		status "fanAuto"		: "command: 4403, payload: 00"
-		status "fanOn"			: "command: 4403, payload: 01"
-		status "fanCirculate"	: "command: 4403, payload: 06"
+		status "auto"			: "command: 4403, payload: 00" // "fanAuto"
+		status "on"				: "command: 4403, payload: 01" // "fanOn"
+		status "circulate"		: "command: 4403, payload: 06" // "fanCirculate
 
 		status "heat 60"        : "command: 4303, payload: 01 09 3C"
 		status "heat 68"        : "command: 4303, payload: 01 09 44"
@@ -74,8 +74,9 @@ metadata {
 	}
 
 	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°',
+		// Using standardTile instead of valueTile as it renders the icon better
+		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', icon: "st.thermostat.ac.air-conditioning",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -88,19 +89,20 @@ metadata {
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "off", label:'${name}', action:"switchMode", nextState:"to_heat"
-			state "heat", label:'${name}', action:"switchMode", nextState:"to_cool"
-			state "cool", label:'${name}', action:"switchMode", nextState:"..."
-			state "auto", label:'${name}', action:"switchMode", nextState:"..."
-			state "emergency heat", label:'${name}', action:"switchMode", nextState:"..."
-			state "to_heat", label: "heat", action:"switchMode", nextState:"to_cool"
-			state "to_cool", label: "cool", action:"switchMode", nextState:"..."
+			state "off", action:"switchMode", nextState:"to_heat", icon: "st.thermostat.heating-cooling-off"
+			state "heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
+			state "auto", action:"switchMode", nextState:"...", icon: "st.thermostat.auto"
+			state "emergency heat", action:"switchMode", nextState:"...", icon: "st.thermostat.emergency-heat"
+			state "to_heat", action:"switchMode", nextState:"to_cool", icon: "st.thermostat.heat"
+			state "to_cool", action:"switchMode", nextState:"...", icon: "st.thermostat.cool"
 			state "...", label: "...", action:"off", nextState:"off"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "fanAuto", label:'${name}', action:"switchFanMode"
-			state "fanOn", label:'${name}', action:"switchFanMode"
-			state "fanCirculate", label:'${name}', action:"switchFanMode"
+			state "auto", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-auto" // "fanAuto"
+			state "on", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-on" // "fanOn"
+			state "circulate", action:"switchFanMode", nextState:"...", icon: "st.thermostat.fan-circulate" // "fanCirculate"
+			state "...", label: "...", nextState:"..."
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"quickSetHeat", backgroundColor:"#d04e00"
@@ -117,11 +119,8 @@ metadata {
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"polling.poll", icon:"st.secondary.refresh"
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
 		main "temperature"
-		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh", "configure"])
+		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
 	}
 }
 
@@ -286,13 +285,13 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 	def map = [:]
 	switch (cmd.fanMode) {
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_AUTO_LOW:
-			map.value = "fanAuto"
+			map.value = "auto" // "fanAuto"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_LOW:
-			map.value = "fanOn"
+			map.value = "on" // "fanOn"
 			break
 		case physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeReport.FAN_MODE_CIRCULATION:
-			map.value = "fanCirculate"
+			map.value = "circulate" // "fanCirculate"
 			break
 	}
 	map.name = "thermostatFanMode"
@@ -309,15 +308,19 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSuppo
 	if(cmd.auto) { supportedModes += "auto " }
 
 	state.supportedModes = supportedModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
 	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "fanAuto " }
-	if(cmd.low) { supportedFanModes += "fanOn " }
-	if(cmd.circulation) { supportedFanModes += "fanCirculate " }
+	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
+	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
+	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
 
 	state.supportedFanModes = supportedFanModes
+	// No events to be generated, return empty map
+	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
@@ -412,7 +415,13 @@ def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
 		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format()
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
 	], 2300)
 }
 
@@ -453,11 +462,11 @@ def switchToMode(nextMode) {
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
 	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "fanAuto fanOn"
-	def modeOrder = ["fanAuto", "fanCirculate", "fanOn"]
+	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
+	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
-	while (!supportedModes?.contains(nextMode) && nextMode != "fanAuto") {
+	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
 		nextMode = next(nextMode)
 	}
 	switchToFanMode(nextMode)
@@ -468,11 +477,11 @@ def switchToFanMode(nextMode) {
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand
-	if (nextMode == "fanAuto") {
+	if (nextMode == "auto") { // "fanAuto"
 		returnCommand = fanAuto()
-	} else if (nextMode == "fanOn") {
+	} else if (nextMode == "on") { // "fanOn"
 		returnCommand = fanOn()
-	} else if (nextMode == "fanCirculate") {
+	} else if (nextMode == "circulate") { // "fanCirculate"
 		returnCommand = fanCirculate()
 	} else {
 		log.debug("no fan mode '$nextMode'")

smartapps/mujica/mediarenderer-connect.src/mediarenderer-connect.groovy

@@ -1,445 +0,0 @@
-/**
- *  MediaRenderer Service Manager v 2.0.1
- *
- *  Author: SmartThings - Ulises Mujica 
- */
- 
-definition(
-	name: "MediaRenderer (Connect)",
-	namespace: "mujica",
-	author: "SmartThings - Ulises Mujica",
-	description: "Allows you to control your Media Renderer from the SmartThings app. Perform basic functions like play, pause, stop, change track, and check artist and song name from the Things screen.",
-	category: "SmartThings Labs",
-	singleInstance: true,
-	iconUrl: "https://graph.api.smartthings.com/api/devices/icons/st.secondary.smartapps-tile?displaySize=2x",
-    iconX2Url: "https://graph.api.smartthings.com/api/devices/icons/st.secondary.smartapps-tile?displaySize=2x"
-)
-
-preferences {
-    page(name: "MainPage", title: "Search and config your Media Renderers", install:true, uninstall: true){
-    	section("") {
-            href(name: "discover",title: "Discovery process",required: false,page: "mediaRendererDiscovery",description: "tap to start searching")
-        }
-        section("Options", hideable: true, hidden: true) {
-            input("refreshMRInterval", "number", title:"Enter refresh players interval (min)",defaultValue:"15", required:false)
-        }
-    }
-    page(name: "mediaRendererDiscovery", title:"Discovery Started!")
-}
-
-def mediaRendererDiscovery()
-{
-    log.trace "mediaRendererDiscovery() state.subscribe ${state.subscribe}"
-    if(canInstallLabs())
-	{
-		
-        
-        int mediaRendererRefreshCount = !state.mediaRendererRefreshCount ? 0 : state.mediaRendererRefreshCount as int
-		state.mediaRendererRefreshCount = mediaRendererRefreshCount + 1
-		def refreshInterval = 5
-
-		def options = mediaRenderersDiscovered() ?: []
-
-		def numFound = options.size() ?: 0
-
-		if(!state.subscribe) {
-			subscribe(location, null, locationHandler, [filterEvents:false])
-			state.subscribe = true
-		}
-
-		//mediaRenderer discovery request every 5 //25 seconds
-		if((mediaRendererRefreshCount % 8) == 0) {
-			discoverMediaRenderers()
-		}
-
-		//setup.xml request every 3 seconds except on discoveries
-		if(((mediaRendererRefreshCount % 1) == 0) && ((mediaRendererRefreshCount % 8) != 0)) {
-			verifyMediaRendererPlayer()
-		}
-		
-		return dynamicPage(name:"mediaRendererDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval) {
-			section("Please wait while we discover your MediaRenderer. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedMediaRenderer", "enum", required:false, title:"Select Media Renderer (${numFound} found)", multiple:true, options:options
-			}
-		}
-	}
-	else
-	{
-		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-		To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-		return dynamicPage(name:"mediaRendererDiscovery", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
-			section("Upgrade") {
-				paragraph "$upgradeNeeded"
-			}
-		}
-	}
-}
-
-private discoverMediaRenderers()
-{
-	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:MediaRenderer:1", physicalgraph.device.Protocol.LAN))
-}
-
-
-private verifyMediaRendererPlayer() {
-	def devices = getMediaRendererPlayer().findAll { it?.value?.verified != true }
-	
-	devices.each {
-		verifyMediaRenderer((it?.value?.ip + ":" + it?.value?.port), it?.value?.ssdpPath)
-	}
-}
-
-private verifyMediaRenderer(String deviceNetworkId, String ssdpPath) {
-    String ip = getHostAddress(deviceNetworkId)
-	if(!ssdpPath){
-		ssdpPath = "/"
-	}
-	log.trace "verifyMediaRenderer($deviceNetworkId, $ssdpPath, $ip)"
-	sendHubCommand(new physicalgraph.device.HubAction("""GET $ssdpPath HTTP/1.1\r\nHOST: $ip\r\n\r\n""", physicalgraph.device.Protocol.LAN, "${deviceNetworkId}"))
-}
-
-Map mediaRenderersDiscovered() {
-	def vmediaRenderers = getVerifiedMediaRendererPlayer()
-	def map = [:]
-	vmediaRenderers.each {
-		def value = "${it.value.name}"
-		def key = it.value.ip + ":" + it.value.port
-		map["${key}"] = value
-	}
-	map
-}
-
-def getMediaRendererPlayer()
-{
-	state.mediaRenderers = state.mediaRenderers ?: [:]
-}
-
-def getVerifiedMediaRendererPlayer()
-{
-	getMediaRendererPlayer().findAll{ it?.value?.verified == true }
-}
-
-def installed() {
-	log.trace "installed()"
-	//initialize()
-}
-
-def updated() {
-	log.trace "updated()"
-
-   
-	if (selectedMediaRenderer) {
-		addMediaRenderer()
-	}
-    
-	unsubscribe()
-	state.subscribe = false
-    unschedule()
-    scheduleTimer()
-    scheduleActions()
-
-    refreshAll()
-    syncDevices()
-}
-
-def uninstalled() {
-	def devices = getChildDevices()
-	devices.each {
-		deleteChildDevice(it.deviceNetworkId)
-	}
-}
-
-def initialize() {
-	// remove location subscription aftwards
-    log.trace "initialize()"
-    //scheduledRefreshHandler()
-}
-
-
-def scheduledRefreshHandler(){
-
-}
-
-def scheduledTimerHandler() {
-    timerAll()
-}
-
-def scheduledActionsHandler() {
-    syncDevices()
-	//runIn(60, scheduledRefreshHandler) 
-}
-
-private scheduleTimer() {
-    def cron = "0 0/3 * * * ?"
-   	schedule(cron, scheduledTimerHandler)
-}
-
-private scheduleActions() {
-    def minutes = Math.max(settings.refreshMRInterval.toInteger(),1)
-    def cron = "0 0/${minutes} * * * ?"
-   	schedule(cron, scheduledActionsHandler)
-}
-
-private syncDevices() {
-	log.debug "syncDevices()"
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-        log.trace "subscribe($location, null, locationHandler, [filterEvents:false])"
-		state.subscribe = true
-	}
-
-	discoverMediaRenderers()
-}
-
-private timerAll(){
-	childDevices*.poll()
-}
-
-private refreshAll(){
-	childDevices*.refresh()
-}
-
-def addMediaRenderer() {
-	def players = getVerifiedMediaRendererPlayer()
-	def runSubscribe = false
-	selectedMediaRenderer.each { dni ->
-		def d = getChildDevice(dni)
-		if(!d) {
-			def newPlayer = players.find { (it.value.ip + ":" + it.value.port) == dni }
-			if (newPlayer){
-				d = addChildDevice("mujica", "DLNA Player", dni, newPlayer?.value.hub, [label:"${newPlayer?.value.name} Speaker","data":["model":newPlayer?.value.model,"avtcurl":newPlayer?.value.avtcurl,"avteurl":newPlayer?.value.avteurl,"rccurl":newPlayer?.value.rccurl,"rceurl":newPlayer?.value.rceurl,"udn":newPlayer?.value.udn,"dni":dni]])
-			}
-			runSubscribe = true
-		} 
-	}
-}
-
-def locationHandler(evt) {
-	def description = evt.description
-	def hub = evt?.hubId
-	def parsedEvent = parseEventMessage(description)
-	def msg = parseLanMessage(description)
-    
-	if (msg?.headers?.sid)
-	{
-		childDevices*.each { childDevice ->
-		    if(childDevice.getDataValue('subscriptionId') == ((msg?.headers?.sid ?:"") - "uuid:")|| childDevice.getDataValue('subscriptionId1') == ((msg?.headers?.sid ?:"") - "uuid:")){
-		       childDevice.parse(description)
-		    }
-		}
-	}
-    
-    
-	parsedEvent << ["hub":hub]
-
-	if (parsedEvent?.ssdpTerm?.contains("urn:schemas-upnp-org:device:MediaRenderer:1"))
-	{ //SSDP DISCOVERY EVENTS
-		log.debug "MediaRenderer device found" + parsedEvent
-		def mediaRenderers = getMediaRendererPlayer()
-
-		
-		if (!(mediaRenderers."${parsedEvent.ssdpUSN.toString()}"))
-		{ //mediaRenderer does not exist
-			mediaRenderers << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // update the values
-
-			def d = mediaRenderers."${parsedEvent.ssdpUSN.toString()}"
-			boolean deviceChangedValues = false
-			if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
-				d.ip = parsedEvent.ip
-				d.port = parsedEvent.port
-				deviceChangedValues = true
-			}
-			if (deviceChangedValues) {
-                def children = getChildDevices()
-				children.each {
-                    if (parsedEvent.ssdpUSN.toString().contains(it.getDataValue("udn"))) {
-						it.setDeviceNetworkId((parsedEvent.ip + ":" + parsedEvent.port)) //could error if device with same dni already exists
-						it.updateDataValue("dni", (parsedEvent.ip + ":" + parsedEvent.port))
-                        it.refresh()
-						log.trace "Updated Device IP"
-
-					}
-				}
-			}
-		}
-	}
-	else if (parsedEvent.headers && parsedEvent.body)
-	{ // MEDIARENDER RESPONSES
-        def headerString = new String(parsedEvent?.headers?.decodeBase64())
-		def bodyString = new String(parsedEvent.body.decodeBase64())
-
-		def type = (headerString =~ /Content-Type:.*/) ? (headerString =~ /Content-Type:.*/)[0] : null
-		def body
-        def device
-		if (bodyString?.contains("xml"))
-		{ // description.xml response (application/xml)
-			body = new XmlSlurper().parseText(bodyString)
-			log.trace "MEDIARENDER RESPONSES ${body?.device?.modelName?.text()}"
-			// Avoid add sonos devices	
-            device = body?.device
-            body?.device?.deviceList?.device?.each{
-                if (it?.deviceType?.text().contains("urn:schemas-upnp-org:device:MediaRenderer:1")) {
-                    device = it
-                }
-            }
-			if ( device?.deviceType?.text().contains("urn:schemas-upnp-org:device:MediaRenderer:1"))
-			{
-				def avtcurl = ""
-				def avteurl = ""
-				def rccurl = ""
-				def rceurl = ""
-         
-			
-				device?.serviceList?.service?.each{
-				  if (it?.serviceType?.text().contains("AVTransport")) {
-						avtcurl = it?.controlURL?.text().startsWith("/")? it?.controlURL.text() : "/" + it?.controlURL.text()
-						avteurl = it?.eventSubURL?.text().startsWith("/")? it?.eventSubURL.text() : "/" + it?.eventSubURL.text()
-					}
-					else if (it?.serviceType?.text().contains("RenderingControl")) {
-						rccurl = it?.controlURL?.text().startsWith("/")? it?.controlURL?.text() : "/" + it?.controlURL?.text()
-						rceurl = it?.eventSubURL?.text().startsWith("/")? it?.eventSubURL?.text() : "/" + it?.eventSubURL?.text()
-					}
-				}
-                
-				
-				def mediaRenderers = getMediaRendererPlayer()
-				def player = mediaRenderers.find {it?.key?.contains(device?.UDN?.text())}
-				if (player)
-				{
-					player.value << [name:device?.friendlyName?.text(),model:device?.modelName?.text(), serialNumber:device?.UDN?.text(), verified: true,avtcurl:avtcurl,avteurl:avteurl,rccurl:rccurl,rceurl:rceurl,udn:device?.UDN?.text()]
-				}
-				
-			}
-		}
-		else if(type?.contains("json"))
-		{ //(application/json)
-			body = new groovy.json.JsonSlurper().parseText(bodyString)
-		}
-	}
-}
-
-private def parseEventMessage(Map event) {
-	//handles mediaRenderer attribute events
-	return event
-}
-
-private def parseEventMessage(String description) {
-	def event = [:]
-	def parts = description.split(',')
-	parts.each { part ->
-		part = part.trim()
-		if (part.startsWith('devicetype:')) {
-			def valueString = part.split(":")[1].trim()
-			event.devicetype = valueString
-		}
-		else if (part.startsWith('mac:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.mac = valueString
-			}
-		}
-		else if (part.startsWith('networkAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.ip = valueString
-			}
-		}
-		else if (part.startsWith('deviceAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.port = valueString
-			}
-		}
-		else if (part.startsWith('ssdpPath:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.ssdpPath = valueString
-			}
-		}
-		else if (part.startsWith('ssdpUSN:')) {
-			part -= "ssdpUSN:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.ssdpUSN = valueString
-			}
-		}
-		else if (part.startsWith('ssdpTerm:')) {
-			part -= "ssdpTerm:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.ssdpTerm = valueString
-			}
-		}
-		else if (part.startsWith('headers')) {
-			part -= "headers:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.headers = valueString
-			}
-		}
-		else if (part.startsWith('body')) {
-			part -= "body:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.body = valueString
-			}
-		}
-	}
-
-	if (event.devicetype == "04" && event.ssdpPath =~ /[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{12}/ && !event.ssdpUSN && !event.ssdpTerm){
-        def matcher = event.ssdpPath =~ /[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{12}/ 
-        def ssdpUSN = matcher[0]
-        event.ssdpUSN = "uuid:$ssdpUSN::urn:schemas-upnp-org:device:MediaRenderer:1"
-        event.ssdpTerm = "urn:schemas-upnp-org:device:MediaRenderer:1"
-    }
-	event
-}
-
-
-/////////CHILD DEVICE METHODS
-def parse(childDevice, description) {
-	def parsedEvent = parseEventMessage(description)
-
-	if (parsedEvent.headers && parsedEvent.body) {
-		def headerString = new String(parsedEvent.headers.decodeBase64())
-		def bodyString = new String(parsedEvent.body.decodeBase64())
-
-		def body = new groovy.json.JsonSlurper().parseText(bodyString)
-	} else {
-		return []
-	}
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
-private getHostAddress(d) {
-	def parts = d.split(":")
-	def ip = convertHexToIP(parts[0])
-	def port = convertHexToInt(parts[1])
-	return ip + ":" + port
-}
-
-private Boolean canInstallLabs()
-{
-	return hasAllHubsOver("000.011.00603")
-}
-
-private Boolean hasAllHubsOver(String desiredFirmware)
-{
-	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
-}
-
-private List getRealHubFirmwareVersions()
-{
-	return location.hubs*.firmwareVersionString.findAll { it }
-}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -511,10 +511,6 @@ def pollResponse(response, data) {
 			if (ResponseValues) {
         def map = [:]
         ResponseValues.hubs.each {
-        // Device-Watch relies on the Logitech Harmony Cloud to get the Device state.
-        def isAlive = it.value.status
-        def d = getChildDevice("harmony-${it.key}")
-        d?.sendEvent(name: "DeviceWatch-DeviceStatus", value: isAlive!=504? "online":"offline", displayed: false, isStateChange: true)
         if (it.value.message == "OK") {
               map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
               def hub = getChildDevice("harmony-${it.key}")