MSA-1964: real time monitoring and leak valve automatic shut off

PROB-1347 Lux values showing as ${unit} in recently tab of Aeon Multipurpose

devicetypes/sensative/sensative-zb-strips.src/sensative-zb-strips.groovy

@@ -1,182 +0,0 @@
-/**
- *  SmartSense Open/Closed Sensor
- *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-metadata {
-	definition(name: "Sensative ZB Strips", namespace: "sensative", author: "SmartThings") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Contact Sensor"
-		capability "Refresh"
-		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Sensative", model: "Strips-001"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Sensative", model: "Strips-001"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Sensativee", model: "Strips-001", deviceJoinName: "Sensative ZB Strips"
-        
-	}
-
-	simulator {
-
-	}
-
-	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
-			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
-			}
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label: '${currentValue}°F',
-					backgroundColors: [
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label: 'Battery\n${currentValue}%', unit: ""
-		}
-
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
-		}
-
-		main(["contact"])
-		details(["contact", "battery", "temperature", "refresh"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = zigbee.getEvent(description)
-	if (!map) {
-		if (description?.startsWith('zone status')) {
-			map = parseIasMessage(description)
-		} else {
-			Map descMap = zigbee.parseDescriptionAsMap(description)
-			if (descMap?.clusterInt == 0x0001 && descMap.commandInt != 0x07 && descMap?.value) {
-				map = getBatteryResult(Integer.parseInt(descMap.value, 16))
-			} else if (descMap?.clusterInt == zigbee.TEMPERATURE_MEASUREMENT_CLUSTER && descMap.commandInt == 0x07) {
-				if (descMap.data[0] == "00") {
-					log.debug "TEMP REPORTING CONFIG RESPONSE: $descMap"
-					sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-				} else {
-					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
-				}
-			}
-		}
-	} else if (map.name == "temperature") {
-		if (tempOffset) {
-			map.value = (int) map.value + (int) tempOffset
-		}
-		map.descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C' : '{{ device.displayName }} was {{ value }}°F'
-		map.translatable = true
-	}
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : [:]
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = zigbee.enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
-}
-
-
-private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
-}
-
-private Map getBatteryResult(rawValue) {
-	log.debug 'Battery'
-	def linkText = getLinkText(device)
-
-    def result = [:]
-
-	def volts = rawValue / 10
-	if (!(rawValue == 0 || rawValue == 255)) {
-		def minVolts = 2.1
-		def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		if (roundedPct <= 0)
-			roundedPct = 1
-		result.value = Math.min(100, roundedPct)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-		result.name = 'battery'
-	}
-
-	return result
-}
-
-private Map getContactResult(value) {
-	log.debug 'Contact Status'
-	def linkText = getLinkText(device)
-	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-	return [
-			name           : 'contact',
-			value          : value,
-			descriptionText: descriptionText
-	]
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
-def refresh() {
-	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
-
-	return refreshCmds + zigbee.enrollResponse()
-}
-
-def configure() {
-	// Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-
-	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,5 +282,4 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
-
+}

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,6 +64,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -84,11 +85,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -123,7 +124,12 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig()
 }
 
 def configure() {
@@ -133,26 +139,38 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	refresh()
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -161,4 +179,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -78,6 +78,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -102,11 +103,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
@@ -141,7 +142,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -156,7 +163,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -180,19 +192,31 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -201,4 +225,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -71,6 +71,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -123,7 +128,11 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -138,7 +147,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+	value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,6 +55,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -72,11 +73,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -108,28 +109,46 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() +
+	zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+	//payload-> sat value, transition time
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,6 +70,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -88,11 +89,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -124,11 +125,16 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -139,17 +145,32 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,6 +66,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -95,14 +100,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
     }
 
-	cmds
+    cmds
 }
 
 def poll() {
@@ -138,7 +143,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -148,7 +153,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,6 +68,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -94,7 +99,11 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def poll() {
@@ -129,8 +138,7 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
+    refresh()
 }
 
 def updated() {
@@ -140,7 +148,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

smartapps/roots/roots-m2m.src/roots-m2m.groovy

@@ -0,0 +1,50 @@
+/**
+ *  Roots M2M
+ *
+ *  Copyright 2017 Ari
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Roots M2M",
+    namespace: "Roots",
+    author: "Ari",
+    description: "valve shut off",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers