Merge pull request #2035 from SmartThingsCommunity/staging

Rolling down staging to master

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -39,8 +39,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -37,8 +37,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Battery"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
+		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -130,5 +131,12 @@ def updated() {
 }
 
 def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
+	def zwMap = getZwaveInfo()
+	def buttons = 4 // Default for Key Fob
+
+	// Only one button for Aeon Panic Button
+	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
+		buttons = 1
+	}
+	sendEvent(name: "numberOfButtons", value: buttons)
 }

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -0,0 +1,43 @@
+# Aeon Multisensor 6
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs MultiSensor 6 is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -29,6 +30,7 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
+		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -127,7 +129,14 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -326,6 +335,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -9,6 +9,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -18,6 +19,7 @@ metadata {
 		command "quickSetHeat"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
+		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
 	// simulator metadata
@@ -106,6 +108,16 @@ metadata {
 	}
 }
 
+def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def result = []
@@ -439,6 +451,14 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -0,0 +1,163 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST815 Illuminance Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Illuminance Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0007", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 3:
+			// luminance
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			map.name = "illuminance"
+			break;
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report lux change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST814 Temperature/Humidity Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0006", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 1:
+			/* temperature */
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			break
+		case 5:
+			/* humidity */
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "humidity"
+			break
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	def result = null
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+	if (encapsulatedCommand) {
+		result = zwaveEvent(encapsulatedCommand)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report temperature change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
+
+		// Auto report humidity change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -107,8 +107,8 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
 		}
 
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,13 +12,13 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
-        
+
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
 		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
@@ -34,19 +34,22 @@ metadata {
 	}
 
 	// tile definitions
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
-		details(["contact","refresh"])
+		main "valve"
+		details(["valve","refresh"])
 	}
 }
 
@@ -62,22 +65,23 @@ def updated(){
 
 def parse(String description) {
 	log.trace description
-	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -98,3 +102,9 @@ def ping() {
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.descriptionText}"
+	return event
+}

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -61,8 +61,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#00A0DC"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -87,8 +87,8 @@ metadata {
 			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#00a0dc")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#cccccc")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label: '${currentValue}°',
@@ -178,7 +178,7 @@ private List<Map> handleAcceleration(descMap) {
 			result += parseAxis(descMap.additionalAttrs)
 		}
 	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
+		def addAttrs = descMap.additionalAttrs ?: []
 		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
 		result += parseAxis(addAttrs)
 	}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -46,8 +46,8 @@
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC")
       		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,7 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,7 +27,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -83,6 +83,9 @@ def parse(String description) {
             }
         }
         sendEvent(event)
+        //handle valve attribute
+        event.name = "valve"
+        sendEvent(event)
     }
     else {
         def descMap = zigbee.parseDescriptionAsMap(description)

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -75,6 +75,10 @@ def parse(String description) {
 	return result
 }
 
+def uninstalled() {
+	sendEvent(name: "epEvent", value: "delete all", isStateChange: true, displayed: false, descriptionText: "Delete endpoint devices")
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	[ createEvent(descriptionText: "${device.displayName} woke up", isStateChange:true),
 	  response(["delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]) ]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,9 +30,15 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
-		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
 		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"0086", prod:"0102", model:"0059", deviceJoinName: "Aeon Labs Recessed Door Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0003", deviceJoinName: "Ecolink Tilt Sensor"
 		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
+		fingerprint mfr:"014F", prod:"2001", model:"0102", deviceJoinName: "Nortek GoControl Door/Window Sensor"
+		fingerprint mfr:"0063", prod:"4953", model:"3031", deviceJoinName: "Jasco Hinge Pin Door Sensor"
+		fingerprint mfr:"019A", prod:"0003", model:"0003", deviceJoinName: "Sensative Strips"
+
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -26,7 +26,24 @@ metadata {
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
-		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
+		fingerprint mfr:"0090", prod:"0001", model:"0236", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0238", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0001", deviceJoinName: "KwikSet SmartCode 910 Contemporary Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0339", deviceJoinName: "KwikSet SmartCode 912 Lever Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"4006", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock" //backlit version
+		fingerprint mfr:"0090", prod:"0003", model:"0440", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"0544", deviceJoinName: "Schlage Camelot Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"5044", deviceJoinName: "Schlage Century Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"634B", model:"504C", deviceJoinName: "Schlage Connected Keypad Lever Door Lock"
+		fingerprint mfr:"0129", prod:"0002", model:"0800", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD120
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD220, YRD240
+		fingerprint mfr:"0129", prod:"0002", model:"FFFF", deviceJoinName: "Yale Touchscreen Lever Door Lock" // YRD220
+		fingerprint mfr:"0129", prod:"0004", model:"0800", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD110
+		fingerprint mfr:"0129", prod:"0004", model:"0000", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"0001", model:"0000", deviceJoinName: "Yale Push Button Lever Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"8002", model:"0600", deviceJoinName: "Yale Assure Lock with Bluetooth"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -29,7 +29,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Portable Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC"
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -22,6 +22,7 @@ metadata {
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -0,0 +1,38 @@
+# Z-Wave Water Valve
+
+Cloud Execution
+
+Works with: 
+
+* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
+
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#Troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Health Check** - indicates ability to get device health notifications
+* **Valve** - allows for the control of a valve device
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+
+## Device Health
+
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
+
+

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -12,14 +12,16 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
+		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
+		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -35,7 +37,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -43,7 +45,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -53,24 +55,32 @@ metadata {
 
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
 def parse(String description) {
 	log.trace "parse description : $description"
-	def result = null
 	def cmd = zwave.parse(description, [0x20: 1])
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
@@ -80,20 +90,22 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "productTypeId:    ${cmd.productTypeId}"
     def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
     updateDataValue("MSR", msr)
-    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
+    return createEventWithDebug([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
+    return createEventWithDebug([descriptionText: cmd.toString(), isStateChange: true, displayed: true])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -114,6 +126,13 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
@@ -122,3 +141,9 @@ def refresh() {
     }
     delayBetween(commands,100)
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.descriptionText}"
+	return event
+}

smartapps/smartthings/smart-nightlight.src/smart-nightlight.groovy

@@ -98,7 +98,7 @@ def motionHandler(evt) {
 	else {
 		state.motionStopTime = now()
 		if(delayMinutes) {
-			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: false])
+			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: true])
 		} else {
 			turnOffMotionAfterDelay()
 		}

smartapps/torick-net/smartthingstostart.src/smartthingstostart.groovy

@@ -1,373 +0,0 @@
-/**
- *  SmartThingsToStart REST Api
- *
- *  Copyright 2017 Dr1rrb
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *	  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-	name: "SmartThingsToStart",
-	namespace: "torick.net",
-	author: "Dr1rrb",
-	description: "SmartThingsToStart REST Api",
-	category: "My Apps",
-	iconUrl: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo.png",
-	iconX2Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@2X.png",
-	iconX3Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@3X.png",
-	oauth: true)
-
-
-preferences {
-	section("Control these devices") {
-		input "switches", "capability.switch", title: "Select switches", multiple: true, required: false
-		input "bubls", "capability.bulb", title: "Select bubls", hideWhenEmpty: true, multiple: true, required: false
-		input "lights", "capability.light", title: "Select lights", hideWhenEmpty: true, multiple: true, required: false
-		input "outlets", "capability.outlet", title: "Select outlets", hideWhenEmpty: true, multiple: true, required: false
-		input "relaySwitches", "capability.relaySwitch", title: "Select relay switches", hideWhenEmpty: true, multiple: true, required: false
-	}
-}
-
-mappings {
-	path("/infos") {
-		action: [GET: "retreiveServerInfos"]
-  	}
-    path("/items") {
-		action: [GET: "retreiveDevicesAndRoutines"]
-  	}
-	path("/device/:id") {
-		action: [GET: "retreiveDevice"]
-	}
-	path("/device/:id/subscription/:subscriptionId") {
-		action: [
-			PUT: "updateOrCreateSubscription",
-			POST: "updateOrCreateSubscription",
-		]
-	}
-    // TODO
-	//path("/device/:id/unsubscribe") {
-	//	action: [POST: "unsubscribeFromDevice"]
-	//}
-	path("/device/:id/:command") {
-		action: [ PUT: "updateDevice" ]
-	}
-    path("/routine/:id/execute") {
-		action: [PUT: "executeRoutine"]
-	}
-}
-
-// Region: App lifecycle
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-    //state.pushChannels = [:]
-	initialize()
-}
-
-def initialize() {
-	def channels = state.pushChannels = state.pushChannels ?: [:];
-	channels.each 
-	{ 
-		def device = findDevice(it.key);
-		if (device != null)
-		{
-			subscribeToDevice(device);
-		}
-	}
-}
-
-
-// Region: Http request handlers
-def retreiveServerInfos()
-{
-	return [version: 1]
-}
-
-def retreiveDevicesAndRoutines() {
-	def details = params.details == "true" ? true : false;
-
-	return [
-		devices: getDevices().collect { getDeviceInfos(it, details) }, 
-		routines: location.helloHome?.getPhrases().collect { getRoutineInfos(it, details) }
-	];
-}
-
-def retreiveDevice() {
-	def device = getDevice(params.id);
-	def details = params.details == "true" ? true : false;
-	
-	return getDeviceInfos(device, details);
-}
-
-def updateOrCreateSubscription() {
-	def device = getDevice(params.id);
-	def channelUri = notNull("channelUri", request.JSON?.channelUri);
-	def token = notNull("token", request.JSON?.token);
-	
-	log.debug "Subscribing to device '${device.id}' (target: '${channelUri}' / token: '${token}')"
-
-	// Get or create the push notification channel from / into the local state
-	def subscriptionId = params.subscriptionId ?: UUID.randomUUID().toString() ;
-	def allSubscriptions = state.pushChannels ?: (state.pushChannels = [:]);
-	def deviceSubscriptions = allSubscriptions[device.id] ?: (allSubscriptions[device.id] = []);
-	def subscription = deviceSubscriptions.find { it.id == subscriptionId };
-	if (subscription == null)
-	{
-		deviceSubscriptions << [
-			id: subscriptionId,
-			deviceId: device.id,
-			channelUri: channelUri,
-			token: token
-		];
-	}
-	else
-	{
-		subscription["channelUri"] = channelUri;
-		subscription["token"]  = token;
-	}
-	
-	log.debug "Active subscriptions: \n" + state.pushChannels.collect { "** Device ${it.key} **\n" + it.value.collect{c -> "- - - > ${c.channelUri} : ${c.token.substring(0, 10)}..."}.join('\n') + "\n***************************" }.join('\n\n')
-	
-	// (Re)create the subscription(s)
-	subscribeToDevice(device)
-
-	return [subscriptionId: subscriptionId];
-}
-
-def subscribeToDevice(device)
-{
-	log.debug "Subscribing to device '${device.id}'"
-
-	unsubscribe(device);
-	subscribe(device, "switch", switchStateChanged)
-
-	if (device.hasCapability("Color Control"))
-	{
-		log.debug "Device '${device.id}' has also the color capability. Subscribe to it."
-		subscribe(device, "color", colorStateChanged)
-	}
-}
-
-def switchStateChanged(eventArgs) { sendPushNotification("switch", eventArgs) }
-def colorStateChanged(eventArgs) { sendPushNotification("color", eventArgs) }
-
-def updateDevice() {
-	def device = getDevice(params.id)
-	def command = notNull("command", params.command)
-	
-	log.debug "Executing '${command}' on device '${device.id}'."
-	
-	switch(command) {
-		case "on":
-		case "On":
-			device.on()
-			break
-
-		case "off":
-		case "Off":
-			device.off()
-			break
-
-		case "toggle":
-		case "Toggle":
-			if (device.currentSwitch == "on")
-				device.off();
-			else
-				device.on();
-			break;
-
-		default:
-			httpError(501, "'${command}' is not a valid command for '${device.id}'")
-	}
-	
-	return getDeviceInfos(device);
-}
-
-def executeRoutine() {
-	def routine = getRoutine(params.id);
-    log.debug "Executing routine '${routine.id}' (${routine.label})"
-    
-    location.helloHome?.execute(routine.id)
-}
-
-// Region: Get device
-def getDevices()
-{
-	return switches
-		+ bubls
-		+ lights
-		+ outlets
-		+ relaySwitches;
-}
-
-def findDevice(deviceId)
-{
-	notNull("deviceId", deviceId);
-	
-	return getDevices().find { it.id == deviceId };
-}
-
-def getDevice(deviceId)
-{
-	def device = findDevice(deviceId);
-	if (device == null)
-	{
-		httpError(404, "Device '${deviceId}' not found.")
-	}
-	return device;
-}
-
-// Region: Get routine
-def findRoutine(routineId)
-{
-	return location.helloHome?.getPhrases().find{ it.id == routineId};
-}
-
-def getRoutine(routineId)
-{
-	def routine = findRoutine(routineId);
-	if (routine == null)
-	{
-		httpError(404, "Routine '${routineId}' not found.")
-	}
-	return routine;
-}
-
-// Region: Parameters assertion helpers
-def notNull(parameterName, value)
-{
-	if(value == null || value == "")
-	{
-		httpError(404, "Missing parameter '${parameterName}'.")
-	}
-	return value;
-}
-
-// Region: Get infos
-def getDeviceInfos(device, details = false)
-{
-   	def infos = [
-		id: device.id,
-		name: device.displayName,
-		state: device.currentValue("switch"),
-        color: device.currentValue("color"),
-        hue: device.currentValue("hue"),
-        saturation: device.currentValue("saturation"),
-		capabilities: device.capabilities.collect { getCapabilityInfos(it, details) }
-	]
-	
-	if (details)
-	{
-		infos["attributes"] = device.supportedAttributes.collect { getAttributeInfos(it, details) }
-		infos["commands"] = device.supportedCommands.collect { getCommandInfos(it, details) }
-	}
-	
-	return infos;
-}
-
-def getCapabilityInfos(capablity, details = false)
-{
-	def infos = [name: capablity.name]
-	
-	if(details)
-	{
-		infos["attributes"] = capablity.attributes.collect { getAttributeInfos(it, details) }
-		infos["commands"] = capablity.commands.collect { getCommandInfos(it, details) }
-	}
-	
-	return infos;
-}
-
-def getCommandInfos(command, details = false)
-{
-	return [
-		name: command.name, 
-		arguments: command.arguments
-	]
-}
-
-def getAttributeInfos(attribute, details = false)
-{
-	return [
-		name: attribute.name, 
-		arguments: attribute.dataType,
-		values: attribute.values
-	]
-}
-
-def getRoutineInfos(routine, details = false)
-{
-	def infos = [
-    	id: routine.id,
-        name: routine.label
-	];
-    
-    if (details)
-    {
-    	infos["hasSecureActions"] = routine.hasSecureActions;
-        infos["action"] = routine.action;
-    }
-    
-    return infos;
-}
-
-// Region: Push notification
-def sendPushNotification(capability, eventArgs)
-{
-	def deviceId = eventArgs.deviceId;
-	log.debug "Received notification for '${capability}' for device '${deviceId}'.";
-	
-	def subscriptions = state.pushChannels.get(deviceId);
-	if (subscriptions == null || subscriptions.empty)
-	{
-		log.error "No subscription found for device ${deviceId}, unsubscribing!";
-		unsubscribe(eventArgs.device);
-		
-		return;
-	}
-
-	subscriptions.groupBy { it.channelUri }.each { sendPushNotification(capability, eventArgs, it.key, it.value) }
-}
-
-def sendPushNotification(capability, eventArgs, channelUri, subscriptions)
-{
-	try {
-		def request = [
-			uri: channelUri,
-			//headers: [name: "Authorization", value: "Bearer ${subscription.token}"],
-			body: [
-				location: [
-					id: eventArgs.locationId,
-				],
-				device: getDeviceInfos(eventArgs.device),
-				event: [
-					source: capability, 
-					date: eventArgs.isoDate, 
-					value: eventArgs.value,
-					name: eventArgs.name,
-				],
-				subscriptions: subscriptions.collect { [id: it.id, token: it.token] }
-			]
-		]
-		
-		// Async post is still in beta stage ...
-		httpPostJson(request) { resp -> log.debug "response: ${resp.status}." }
-		
-	} catch (e) {
-		log.error "Failed to push notification: ${e}"
-	}
-}

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -125,19 +125,19 @@
       if(allOk) {
     
       if(everyoneIsAway() && (state.sunMode == "sunrise")) {
-        log.info("Home is Empty  Setting New Away Mode")
+        log.debug("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
     
       if(everyoneIsAway() && (state.sunMode == "sunset")) {
-        log.info("Home is Empty  Setting New Away Mode")
+        log.debug("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
       
       else {
-      log.info("Home is Occupied Setting New Home Mode")
+      log.debug("Home is Occupied Setting New Home Mode")
       setHome()
     
     
@@ -152,7 +152,7 @@
         log.debug("Checking if everyone is away")
     
         if(everyoneIsAway()) {
-          log.info("Nobody is home, running away sequence")
+          log.debug("Nobody is home, running away sequence")
           def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
           runIn(delay, "setAway")
         }
@@ -161,7 +161,7 @@
     else {
     	def lastTime = state[evt.deviceId]
         if (lastTime == null || now() - lastTime >= 1 * 60000) {
-      		log.info("Someone is home, running home sequence")
+      		log.debug("Someone is home, running home sequence")
       		setHome()
         }    
     	state[evt.deviceId] = now()
@@ -175,14 +175,14 @@
       if(everyoneIsAway()) {
         if(state.sunMode == "sunset") {
           def message = "Performing \"${awayNight}\" for you as requested."
-          log.info(message)
+          log.debug(message)
           sendAway(message)
           location.helloHome.execute(settings.awayNight)
         }
         
         else if(state.sunMode == "sunrise") {
           def message = "Performing \"${awayDay}\" for you as requested."
-          log.info(message)
+          log.debug(message)
           sendAway(message)
           location.helloHome.execute(settings.awayDay)
           }
@@ -192,19 +192,19 @@
       }
     
       else {
-        log.info("Somebody returned home before we set to '${newAwayMode}'")
+        log.debug("Somebody returned home before we set to '${newAwayMode}'")
       }
     }
     
     //set home mode when house is occupied
     def setHome() {
     sendOutOfDateNotification()
-    log.info("Setting Home Mode!!")
+    log.debug("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
           if (location.mode != "${homeModeNight}"){
           def message = "Performing \"${homeNight}\" for you as requested."
-            log.info(message)
+            log.debug(message)
             sendHome(message)
             location.helloHome.execute(settings.homeNight)
             }
@@ -213,7 +213,7 @@
           if(state.sunMode == "sunrise"){
           if (location.mode != "${homeModeDay}"){
           def message = "Performing \"${homeDay}\" for you as requested."
-            log.info(message)
+            log.debug(message)
             sendHome(message)
             location.helloHome.execute(settings.homeDay)
                 }
@@ -329,4 +329,4 @@
         	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
         	state.lastTime = (new Date() + 31).getTime()
         }
-    }
+    }