Merge pull request #2034 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -34,22 +34,19 @@ metadata {
 	}
 
 	// tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-			}
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
+			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
 		}
-
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "valve"
-		details(["valve","refresh"])
+		main "contact"
+		details(["contact","refresh"])
 	}
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,8 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-    fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,0020,0101,0B05", outClusters: "000A, 0019, 0B05", manufacturer: "Danalock", model: "V3-BTZB",deviceJoinName: "Danalock V3-BTZB"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {
@@ -171,4 +170,4 @@ private Map parseReportAttributeMessage(String description) {
         log.debug "parseReportAttributeMessage() --- ignoring attribute"
     }
     return resultMap
-}
+}

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,7 +27,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -1,38 +0,0 @@
-# Z-Wave Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
-
-

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -14,14 +14,12 @@
 metadata {
 	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
-		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -37,7 +35,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -45,7 +43,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -55,14 +53,7 @@ metadata {
 
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
@@ -126,13 +117,6 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]

smartapps/smartthings/smart-nightlight.src/smart-nightlight.groovy

@@ -98,7 +98,7 @@ def motionHandler(evt) {
 	else {
 		state.motionStopTime = now()
 		if(delayMinutes) {
-			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: true])
+			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: false])
 		} else {
 			turnOffMotionAfterDelay()
 		}

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -125,19 +125,19 @@
       if(allOk) {
     
       if(everyoneIsAway() && (state.sunMode == "sunrise")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
     
       if(everyoneIsAway() && (state.sunMode == "sunset")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
       
       else {
-      log.debug("Home is Occupied Setting New Home Mode")
+      log.info("Home is Occupied Setting New Home Mode")
       setHome()
     
     
@@ -152,7 +152,7 @@
         log.debug("Checking if everyone is away")
     
         if(everyoneIsAway()) {
-          log.debug("Nobody is home, running away sequence")
+          log.info("Nobody is home, running away sequence")
           def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
           runIn(delay, "setAway")
         }
@@ -161,7 +161,7 @@
     else {
     	def lastTime = state[evt.deviceId]
         if (lastTime == null || now() - lastTime >= 1 * 60000) {
-      		log.debug("Someone is home, running home sequence")
+      		log.info("Someone is home, running home sequence")
       		setHome()
         }    
     	state[evt.deviceId] = now()
@@ -175,14 +175,14 @@
       if(everyoneIsAway()) {
         if(state.sunMode == "sunset") {
           def message = "Performing \"${awayNight}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayNight)
         }
         
         else if(state.sunMode == "sunrise") {
           def message = "Performing \"${awayDay}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayDay)
           }
@@ -192,19 +192,19 @@
       }
     
       else {
-        log.debug("Somebody returned home before we set to '${newAwayMode}'")
+        log.info("Somebody returned home before we set to '${newAwayMode}'")
       }
     }
     
     //set home mode when house is occupied
     def setHome() {
     sendOutOfDateNotification()
-    log.debug("Setting Home Mode!!")
+    log.info("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
           if (location.mode != "${homeModeNight}"){
           def message = "Performing \"${homeNight}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeNight)
             }
@@ -213,7 +213,7 @@
           if(state.sunMode == "sunrise"){
           if (location.mode != "${homeModeDay}"){
           def message = "Performing \"${homeDay}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeDay)
                 }
@@ -329,4 +329,4 @@
         	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
         	state.lastTime = (new Date() + 31).getTime()
         }
-    }
+    }