DHF-7 Z-Wave Lock: Add scheduled checks in case ping() is missed

NVS-6

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -1,268 +0,0 @@
-/**
- *
- *  Inovelli 2-Channel Smart Plug
- *
- *  github: Eric Maycock (erocm123)
- *  Date: 2017-04-27
- *  Copyright Eric Maycock
- *
- *  Includes all configuration parameters and ease of advanced configuration.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Actuator"
-		capability "Sensor"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Health Check"
-
-		fingerprint manufacturer: "015D", prod: "0221", model: "251C", deviceJoinName: "Show Home 2-Channel Smart Plug"
-		fingerprint manufacturer: "0312", prod: "B221", model: "251C", deviceJoinName: "Inovelli 2-Channel Smart Plug"
-	}
-	simulator {}
-	preferences {}
-	tiles {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
-		}
-		main(["switch"])
-		details(["switch",
-				 childDeviceTiles("all"), "refresh"
-		])
-	}
-}
-def parse(String description) {
-	def result = []
-	def cmd = zwave.parse(description)
-	if (cmd) {
-		result += zwaveEvent(cmd)
-		logging("Parsed ${cmd} to ${result.inspect()}", 1)
-	} else {
-		logging("Non-parsed event: ${description}", 2)
-	}
-	return result
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
-	logging("BasicReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		childDevices.each {
-			childDevice ->
-				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
-					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-				}
-		}
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n ->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	logging("BasicSet ${cmd}", 2)
-	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-	def cmds = []
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	return [result, response(commands(cmds))] // returns the result of reponse()
-}
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
-	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		def childDevice = childDevices.find {
-			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
-		}
-		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	} else {
-		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-		def cmds = []
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-		return [result, response(commands(cmds))] // returns the result of reponse()
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	logging("MultiChannelCmdEncap ${cmd}", 2)
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	logging("ManufacturerSpecificReport ${cmd}", 2)
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	logging("msr: $msr", 2)
-	updateDataValue("MSR", msr)
-}
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// This will capture any commands not handled by other instances of zwaveEvent
-	// and is recommended for development so you can see every command the device sends
-	logging("Unhandled Event: ${cmd}", 2)
-}
-def on() {
-	logging("on()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOn(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-def off() {
-	logging("off()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOff(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-void childOn(String dni) {
-	logging("childOn($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childOff(String dni) {
-	logging("childOff($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childRefresh(String dni) {
-	logging("childRefresh($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-def poll() {
-	logging("poll()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def refresh() {
-	logging("refresh()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def ping() {
-	logging("ping()", 1)
-	refresh()
-}
-def installed() {
-	logging("installed()", 1)
-	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
-	createChildDevices()
-}
-def updated() {
-	logging("updated()", 1)
-	if (!childDevices) {
-		createChildDevices()
-	} else if (device.label != state.oldLabel) {
-		childDevices.each {
-			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
-				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
-				it.setLabel(newLabel)
-			}
-		}
-		state.oldLabel = device.label
-	}
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
-}
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
-}
-private encap(cmd, endpoint) {
-	if (endpoint) {
-		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
-	} else {
-		cmd
-	}
-}
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-private commands(commands, delay = 1000) {
-	delayBetween(commands.collect {
-		command(it)
-	}, delay)
-}
-private channelNumber(String dni) {
-	dni.split("-ep")[-1] as Integer
-}
-private void createChildDevices() {
-	state.oldLabel = device.label
-	for (i in 1..2) {
-		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
-																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
-		])
-	}
-}
-
-private def logging(message, level) {
-	if (logLevel != "0") {
-		switch (logLevel) {
-			case "1":
-				if (level > 1) log.debug "$message"
-				break
-			case "99":
-				log.debug "$message"
-				break
-		}
-	}
-}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -1,49 +0,0 @@
-/**
- *  Switch Child Device
- *
- *  Copyright 2017 Eric Maycock
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Switch"
-		capability "Actuator"
-		capability "Sensor"
-		capability "Refresh"
-	}
-
-	tiles {
-		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-	}
-}
-
-void on() {
-	parent.childOn(device.deviceNetworkId)
-}
-
-void off() {
-	parent.childOff(device.deviceNetworkId)
-}
-
-void refresh() {
-	parent.childRefresh(device.deviceNetworkId)
-}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -24,7 +24,10 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Health Check"
 
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+
+		fingerprint mfr:"010F", prod:"0801", model:"2001"
+		fingerprint mfr:"010F", prod:"0801", model:"1001"
 	}
 
 	simulator {

devicetypes/smartthings/aeon-led-bulb.src/aeon-led-bulb.groovy

@@ -251,4 +251,4 @@ def huesatToRGB(float hue, float sat) {
 		case 4: return [t, p, 255]
 		case 5: return [255, p, q]
 	}
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -22,6 +22,8 @@ metadata {
 		capability "Battery"
 		capability "Health Check"
 
+		command "configureAfterSecure"
+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
@@ -89,12 +91,12 @@ metadata {
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "configure", label:'', action:"configure", icon:"st.secondary.configure"
+        standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
 		}
 
 		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery", "configure"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
 	}
 }
 
@@ -129,8 +131,8 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		log.debug("not sending wakeUpNoMoreInformation yet: late configure")
-		result += response(configure())
+		log.debug("not sending wakeUpNoMoreInformation yet")
+        result += response(configureAfterSecure())
 	} else {
 		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
@@ -148,6 +150,11 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 	}
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+    // log.debug "Received SecurityCommandsSupportedReport"
+	response(configureAfterSecure())
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -219,6 +226,36 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
+def configureAfterSecure() {
+    // log.debug "configureAfterSecure()"
+
+    def request = [
+		// send temperature, humidity, and illuminance every 8 minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32),
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
+
+		// send battery every 20 hours
+		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1),
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60),
+
+		// send no-motion report 60 seconds after motion stops
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60),
+
+		// send binary sensor report instead of basic set for motion
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2),
+
+		// disable notification-style motion events
+		zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0),
+
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
+    ]
+	
+    setConfigured()
+	
+    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+}
+
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
@@ -228,36 +265,7 @@ def ping() {
 
 def configure() {
 	// log.debug "configure()"
-	def request = []
-	// send temperature, humidity, and illuminance every 8 minutes
-	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60)
-
-	// send battery every 20 hours
-	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60)
-
-	// send no-motion report 60 seconds after motion stops
-	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60)
-
-	// send binary sensor report instead of basic set for motion
-	request << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)
-
-	// Turn on the Multisensor Gen5 PIR sensor
-	request << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
-
-	// disable notification-style motion events
-	request << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
-
-	request << zwave.batteryV1.batteryGet()
-	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
-
-	setConfigured()
-
-	secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -1,48 +0,0 @@
-# Aeon Multisensor
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Aeon Labs MultiSensor is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Battery Specification
-
-Four AAA batteries are required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -94,16 +93,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -190,13 +179,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
@@ -61,8 +61,6 @@ metadata {
 def installed() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(secure(zwave.basicV1.basicGet()))
 }
 
 def updated() {
@@ -165,4 +163,4 @@ private secure(physicalgraph.zwave.Command cmd) {
  * */
 def ping() {
 	secure(zwave.basicV1.basicGet())
-}
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch
  *

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -108,20 +108,11 @@ def updated(){
     }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -188,16 +179,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -47,14 +47,14 @@
 		capability 	"Sensor"
 		capability 	"Battery"
 		capability  "Health Check"
+		command "resetParams2StDefaults"
+		command "listCurrentParams"
+		command "updateZwaveParam"
+		command "test"
+		command "configure"
 
-        command		"resetParams2StDefaults"
-        command		"listCurrentParams"
-        command		"updateZwaveParam"
-        command		"test"
-        command		"configure"
-
-		fingerprint deviceId: "0x2001", inClusters: "0x30,0x84,0x85,0x80,0x8F,0x56,0x72,0x86,0x70,0x8E,0x31,0x9C,0xEF,0x30,0x31,0x9C"
+		fingerprint mfr:"010F", prod:"0800", model:"2001"
+		fingerprint mfr:"010F", prod:"0800", model:"1001"
 	}
 
 	simulator {

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -56,8 +56,6 @@ metadata {
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(refresh())
 }
 
 def updated(){
@@ -87,17 +85,11 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def open() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
 }
 
 def close() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
 }
 
 /**
@@ -113,6 +105,6 @@ def refresh() {
 
 def createEventWithDebug(eventMap) {
 	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
+	log.debug "Event created with ${event?.descriptionText}"
 	return event
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bloom
  *

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bridge
  *

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bulb
  *

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Lux Bulb
  *

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue White Ambiance Bulb
  *

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -49,6 +49,6 @@ def arrived() {
 
 
 def departed() {
-	log.trace "Executing 'departed'"
+	log.trace "Executing 'arrived'"
 	sendEvent(name: "presence", value: "not present")
 }

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -34,7 +34,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL6HD", deviceJoinName: "Leviton Dimmer Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL3HL", deviceJoinName: "Leviton Lumina RF Plug-In Dimmer"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008", outClusters: "0003, 0006, 0008, 0019, 0406", manufacturer: "Leviton", model: "DL1KD", deviceJoinName: "Leviton Lumina RF Dimmer Switch"
-        fingerprint profileId: "0104", deviceId: "0001", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
     }
 
     tiles(scale: 2) {
@@ -67,29 +66,22 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    } else {
-        def descMap = zigbee.parseDescriptionAsMap(description)
-        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
-            if (descMap.data[0] == "00") {
+    }
+    else {
+        def cluster = zigbee.parse(description)
+
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            } else {
+            }
+            else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
-            // This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
-            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
-            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
-            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
-            // something else.
-            if (descMap.value.toUpperCase() == "FF") {
-                descMap.value = "FE"
-            }
-            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
-            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
-        } else {
+        }
+        else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${descMap}"
+            log.debug "${cluster}"
         }
     }
 }
@@ -138,4 +130,4 @@ def configure() {
 
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     refresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -103,12 +103,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                runIn(5, updateColor, [overwrite: true])
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                runIn(5, updateColor, [overwrite: true])
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
         else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
@@ -127,11 +127,6 @@ def parse(String description) {
     }
 }
 
-def updateColor() {
-	sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
-	sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
-}
-
 def on() {
     zigbee.on()
 }
@@ -209,9 +204,9 @@ def setColor(value){
     log.trace "setColor($value)"
     zigbee.on() +
     zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-    getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,6 +27,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -88,20 +88,11 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -168,16 +159,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -113,9 +113,9 @@ def updated() {
 
 def configure() {
 	commands([
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW),
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-	], 1000)
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
+	], 6000)
 }
 
 def sensorValueEvent(value) {
@@ -190,17 +190,11 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
-
-	if (device.currentValue("contact") == null) { // Incase our initial request didn't make it
-		cmds << command(zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW))
-	}
-
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
-	} else { // If we check the battery state we will send NoMoreInfo in the handler for BatteryReport so that we definitely get the report
+	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
-
 	[event, response(cmds)]
 }
 

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -86,13 +86,13 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def installed() {
-	// Device-Watch pings if no device events received for 1 hour (checkInterval)
-	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-	// Device-Watch pings if no device events received for 1 hour (checkInterval)
-	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -153,8 +153,8 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
 
-	unschedule("followupStateCheck")
-	unschedule("stateCheck")
+	unschedule(followupStateCheck)
+	unschedule(stateCheck)
 
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
@@ -464,7 +464,7 @@ def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
 			"delay 1200",
 			zwave.associationV1.associationGet(groupingIdentifier:2).format()
-	]
+		]
 	[result, response(cmds)]
 }
 

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -85,21 +85,11 @@ metadata {
 	details(["switch", "power", "energy", "levelSliderControl", "refresh", "reset"])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 3,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-		0x32: 3,  // Meter
-	]
-}
-
 // parse events into attributes
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x32:3])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 	        log.debug("'$description' parsed to $result")
@@ -134,21 +124,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelR
 	dimmerEvents(cmd)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
 def dimmerEvents(physicalgraph.zwave.Command cmd) {
 	def result = []
 	def value = (cmd.value ? "on" : "off")

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -89,19 +89,10 @@ def updated() {
 	} catch (e) { log.debug e }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x32: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x72: 2,  // ManufacturerSpecific
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if(description == "updated") return
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
@@ -166,16 +157,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.debug "$device.displayName: Unhandled: $cmd"
 	[:]

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2014-07-15
  */
 metadata {
-	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -71,17 +71,9 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -128,15 +120,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -89,17 +89,9 @@ def updated(){
     }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -146,16 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

smartapps/mmasmartthing/mmasmarththingdemo.src/mmasmarththingdemo.groovy

@@ -1,50 +0,0 @@
-/**
- *  MMASmarthThingDemo
- *
- *  Copyright 2017 Raja
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "MMASmarthThingDemo",
-    namespace: "MMASmartThing",
-    author: "Raja",
-    description: "MMASmartThing demo app is for learning purpose to know how to integrage smarthings with mobile apps",
-    category: "Fun & Social",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-	section("Title") {
-		// TODO: put inputs here
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-}
-
-// TODO: implement event handlers

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch (Connect)
  *

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Service Manager
  *
@@ -1085,6 +1083,7 @@ def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
 	updateInProgress()
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
 	return "Bulb is turning On"
 }
@@ -1093,6 +1092,7 @@ def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
 	updateInProgress()
+	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
 	return "Bulb is turning Off"
 }
@@ -1108,6 +1108,8 @@ def setLevel(childDevice, percent) {
 	else
 		level = Math.min(Math.round(percent * 254 / 100), 254)
 
+	createSwitchEvent(childDevice, level > 0, percent)
+
 	// For Zigbee lights, if level is set to 0 ST just turns them off without changing level
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
@@ -1126,6 +1128,7 @@ def setSaturation(childDevice, percent) {
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
@@ -1137,6 +1140,7 @@ def setHue(childDevice, percent) {
 	// 0 - 65535
 	def level = Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
@@ -1147,6 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000 / huesettings)
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $ct"
 }
@@ -1205,6 +1210,7 @@ def setColor(childDevice, huesettings) {
 	if (huesettings.switch == "off")
 		value.on = false
 
+	createSwitchEvent(childDevice, value.on ? "on" : "off")
 	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
@@ -1316,6 +1322,32 @@ private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }
 
+/**
+ * Sends appropriate turningOn/turningOff state events depending on switch or level changes.
+ *
+ * @param childDevice device to send event for
+ * @param setSwitch The new switch state, "on" or "off"
+ * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
+ * 				  that should generate "off" instead of level change
+ */
+private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
+
+	if (setLevel == null) {
+		setLevel = childDevice.device?.currentValue("level")
+	}
+	// Create on, off, turningOn or turningOff event as necessary
+	def currentState = childDevice.device?.currentValue("switch")
+	if ((currentState == "off" || currentState == "turningOff")) {
+		if (setSwitch == "on" || setLevel > 0) {
+			childDevice.sendEvent(name: "switch", value: "turningOn", displayed: false)
+		}
+	} else if ((currentState == "on" || currentState == "turningOn")) {
+		if (setSwitch == "off" || setLevel == 0) {
+			childDevice.sendEvent(name: "switch", value: "turningOff", displayed: false)
+		}
+	}
+}
+
 /**
  * Return the supported color range for different Hue lights. If model is not specified
  * it defaults to the smallest Gamut (B) to ensure that colors set on a mix of devices

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *