MSA-2114: Updates to the original device hander (SmartSense Moisture) that is officially supported and published by SmartThings. Updates are to the name, to separate from the Zigbee SmartThings brand sensor which has the same name "SmartSense Moisture", and several bug fixes and updates for optimized performance.

Rolling down staging to master

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://artifactory.smartthings.com/libs-release-local"
+            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://artifactory.smartthings.com/libs-release-local"
+        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'smartthings:appengine-common:0.1.9'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'Hickory'
+            username = 'DEV'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'Dickory'
+            username = 'STG'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'Dock'
+            username = 'PRD'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/fortrezz/fortrezz-water-sensor.src/fortrezz-water-sensor.groovy

@@ -0,0 +1,180 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "FortrezZ Water Sensor", namespace: "fortrezz", author: "SmartThings") {
+		capability "Water Sensor"
+		capability "Sensor"
+		capability "Battery"
+        capability "Temperature Measurement"
+
+		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
+		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
+	}
+
+	simulator {
+		status "dry": "command: 7105, payload: 00 00 00 FF 05 FE 00 00"
+		status "wet": "command: 7105, payload: 00 FF 00 FF 05 02 00 00"
+		status "overheated": "command: 7105, payload: 00 00 00 FF 04 02 00 00"
+		status "freezing": "command: 7105, payload: 00 00 00 FF 04 05 00 00"
+		status "normal": "command: 7105, payload: 00 00 00 FF 04 FE 00 00"
+		for (int i = 0; i <= 100; i += 20) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage()
+		}
+	}
+	
+	tiles(scale: 2) {
+		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+			}
+		}
+		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
+			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
+			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
+			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+            state("temperature", label:'${currentValue}°',
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
+        }
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		main (["water", "temperatureState"])
+		details(["water", "temperatureState", "temperature", "battery"])
+	}
+}
+
+def parse(String description) {
+	def result = []
+	def parsedZwEvent = zwave.parse(description, [0x30: 1, 0x71: 2, 0x84: 1])
+
+	if(parsedZwEvent) {
+		if(parsedZwEvent.CMD == "8407") {
+			def lastStatus = device.currentState("battery")
+			def ageInMinutes = lastStatus ? (new Date().time - lastStatus.date.time)/60000 : 600
+			log.debug "Battery status was last checked ${ageInMinutes} minutes ago"
+
+			if (ageInMinutes >= 600) {
+				log.debug "Battery status is outdated, requesting battery report"
+				result << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
+			}
+			result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+		}
+		result << createEvent( zwaveEvent(parsedZwEvent) )
+	}
+	if(!result) result = [ descriptionText: parsedZwEvent, displayed: false ]
+	log.debug "Parse returned ${result}"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	[descriptionText: "${device.displayName} woke up", isStateChange: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	def map = [:]
+	map.name = "water"
+	map.value = cmd.sensorValue ? "wet" : "dry"
+	map.descriptionText = "${device.displayName} is ${map.value}"
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	if(cmd.batteryLevel == 0xFF) {
+		map.name = "battery"
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.displayed = true
+	} else {
+		map.name = "battery"
+		map.value = cmd.batteryLevel > 0 ? cmd.batteryLevel.toString() : 1
+		map.unit = "%"
+		map.displayed = false
+	}
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
+{
+	def map = [:]
+	if (cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_WATER) {
+		map.name = "water"
+		map.value = cmd.alarmLevel ? "wet" : "dry"
+		map.descriptionText = "${device.displayName} is ${map.value}"
+	}
+	if(cmd.zwaveAlarmType ==  physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) {
+		map.name = "temperatureState"
+		if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"}
+		if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"}
+		if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"}
+		if(cmd.zwaveAlarmEvent == 4) { map.value = "changing temperature rapidly"}
+		if(cmd.zwaveAlarmEvent == 5) { map.value = "freezing"}
+		if(cmd.zwaveAlarmEvent == 6) { map.value = "freezing"}
+		if(cmd.zwaveAlarmEvent == 254) { map.value = "normal"}
+		map.descriptionText = "${device.displayName} is ${map.value}"
+	}
+
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
+{
+	def map = [:]
+	if(cmd.sensorType == 1) {
+		map.name = "temperature"
+        if(cmd.scale == 0) {
+        	map.value = getTemperature(cmd.scaledSensorValue)
+        } else {
+	        map.value = cmd.scaledSensorValue
+        }
+        map.unit = location.temperatureScale
+	}
+	map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	def map = [:]
+	map.name = "water"
+	map.value = cmd.value ? "wet" : "dry"
+	map.descriptionText = "${device.displayName} is ${map.value}"
+	map
+}
+
+def getTemperature(value) {
+	if(location.temperatureScale == "C"){
+		return value
+    } else {
+        return Math.round(celsiusToFahrenheit(value))
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd)
+{
+	log.debug "COMMAND CLASS: $cmd"
+}

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -Pre-release V2 10/8/2015
+ *  Spruce Sensor -updated with SLP model number 5/2017
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,25 +14,33 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh(?)
+ -remove polling and/or refresh
+ 
+ -------5/2017 Updates--------
+ -Add fingerprints for SLP
+ -add device health, check every 60mins + 2mins
  */
+ 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
+        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
+        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
 	}
 
 	preferences {
@@ -293,6 +301,11 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
+def installed(){
+	//check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+}
+
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -303,6 +316,8 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
+    //check every 1 hour + 2mins
+    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -395,4 +410,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -0,0 +1,34 @@
+# Aeon Labs Key Fob
+
+Cloud Execution
+
+Works with:
+
+* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
+* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +20,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -131,6 +133,9 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -0,0 +1,33 @@
+# Aeon Minimote
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents device has commands
+* **Button** - represents a device with one or more buttons
+* **Holdable Button** - represents a device with one or more holdable buttons
+* **Configuration** - allows for configuration of devices
+* **Sensor** - detects sensor events
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
+* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -18,6 +19,7 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -119,5 +121,7 @@ def updated() {
 }
 
 def initialize() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -27,13 +27,9 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor 6 is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+Aeon MultiSensor reports in once every hour.
 
-* __32min__ checkInterval
+* __122min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -130,13 +130,13 @@ metadata {
 }
 
 def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -70,7 +70,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "emergency heat", action:"switchMode", icon: "st.thermostat.emergency-heat" // emergency heat = auxHeatOnly
+			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -156,47 +156,49 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
-		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-			def isChange = false
-			def isDisplayed = true
+		def supportedThermostatModes = ["off"]
+		def thermostatMode = null
+
+		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
-				isChange = isTemperatureStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				if (value == true) {
+					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				}
+				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
+				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
 			}  else if (name=="humidity") {
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
+				event << [value: value.toString(), displayed: false, unit: "%"]
 			} else if (name == "deviceAlive") {
-				isChange = isStateChange(device, name, value.toString())
-				event['isStateChange'] = isChange
 				event['displayed'] = false
 			} else if (name == "thermostatMode") {
-				def mode = value.toString()
-				mode = (mode == "auxHeatOnly") ? "emergency heat" : mode
-				isChange = isStateChange(device, name, mode)
-				event << [value: mode, isStateChange: isChange, displayed: isDisplayed]
+				thermostatMode = value.toLowerCase()
+				return // as we don't want to send this event here, proceed to next name/value pair
 			} else {
-				isChange = isStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+				event << [value: value.toString()]
 			}
 			sendEvent(event)
 		}
+		if (state.supportedThermostatModes != supportedThermostatModes) {
+			state.supportedThermostatModes = supportedThermostatModes
+			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
+		}
+		if (thermostatMode) {
+			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
+					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
+		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -322,15 +324,7 @@ void resumeProgram() {
 }
 
 def modes() {
-	if (state.modes) {
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
-	else {
-		state.modes = parent.availableModes(this)
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
+	return state.supportedThermostatModes
 }
 
 def fanModes() {
@@ -413,11 +407,13 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
+	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
+	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -453,14 +449,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxHeatOnly()
+	auxheatonly()
 }
 
-def auxHeatOnly() {
-	log.debug "auxHeatOnly = emergency heat"
+def auxheatonly() {
+	log.debug "auxheatonly()"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("emergency heat") // emergency heat = auxHeatOnly
+		generateModeEvent("auxheatonly")
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -593,7 +589,7 @@ def generateSetpointEvent() {
 	} else if (mode == "off") {
 		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
+	} else if (mode == "auxheatonly") {
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
 	}
@@ -632,7 +628,7 @@ void raiseSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue > maxHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
@@ -678,7 +674,7 @@ void lowerSetpoint() {
 		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "emergency heat") && targetvalue < minHeatingSetpoint) { // emergency heat = auxHeatOnly
+		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
@@ -719,7 +715,7 @@ void alterSetpoint(temp) {
 		}
 
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+		if (mode == "heat" || mode == "auxheatonly"){
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -754,7 +750,7 @@ void alterSetpoint(temp) {
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "emergency heat"){ // emergency heat = auxHeatOnly
+			if (mode == "heat" || mode == "auxheatonly"){
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
@@ -783,7 +779,7 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat") {
+	if (mode == "heat" || mode == "auxheatonly") {
 		if (temperature >= heatingSetpoint) {
 			statusText = "Right Now: Idle"
 		} else {
@@ -806,8 +802,6 @@ def generateStatusEvent() {
 		}
 	} else if (mode == "off") {
 		statusText = "Right Now: Off"
-	} else if (mode == "emergency heat") { // emergency heat = auxHeatOnly
-		statusText = "Emergency Heat"
 	} else {
 		statusText = "?"
 	}

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -35,8 +35,8 @@ metadata {
 
 	// tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -48,8 +48,8 @@ metadata {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "valve"
-		details(["valve","refresh"])
+		main "contact"
+		details(["contact","refresh"])
 	}
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
-		capability "Light"
 		capability "Outlet"
 
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,6 +105,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -129,6 +131,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -197,7 +203,8 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,6 +111,8 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -135,6 +137,10 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
+	translateZoneStatus(zs)
+}
+
+private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -165,8 +171,8 @@ private Map getBatteryResult(rawValue) {
 			def pct = batteryMap[volts]
 			result.value = pct
 		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
+			def minVolts = 2.4
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)
@@ -200,7 +206,8 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,8 +134,9 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
+			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
+				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
-
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -229,6 +230,11 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	translateZoneStatus(zs)
+}
+
+private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -268,7 +274,7 @@ private Map getBatteryResult(rawValue) {
 			result.value = pct
 		} else {
 			def minVolts = 2.1
-			def maxVolts = 3.0
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)
@@ -313,7 +319,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.enrollResponse()
+			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -0,0 +1,42 @@
+# ZigBee Button
+
+Cloud Execution
+
+Works with: 
+
+* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Battery** - It defines that the device has a battery
+* **Button** - It defines that a device has one or more buttons
+* **Holdable Button** - It defines that a device has one or more holdable buttons
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - it represents that a Device has attributes.
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+ZigBee Button is marked offline only in the case when Hub is offline.
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
+* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
+* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,6 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+import groovy.json.JsonOutput
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
@@ -24,6 +26,7 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
+        capability "Health Check"
 
         command "enrollResponse"
 
@@ -249,6 +252,8 @@ def updated() {
 }
 
 def initialize() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -38,8 +38,8 @@ metadata {
     }
 
     tiles(scale: 2) {
-        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+        multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -58,8 +58,8 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["valve"])
-        details(["valve", "battery", "refresh"])
+        main(["contact"])
+        details(["contact", "battery", "refresh"])
     }
 }
 

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -15,10 +15,9 @@ metadata {
 	definition (name: "Z-Wave Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Configuration"
-		capability "Polling"
+		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
 		
@@ -117,7 +116,7 @@ metadata {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"polling.poll", icon:"st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		main "temperature"
 		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
@@ -125,13 +124,20 @@ metadata {
 }
 
 def installed(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format()))
+	initialize()
 }
 
 def updated(){
+	initialize()
+}
+
+def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	unschedule()
+	runEvery5Minutes("refresh")
+	refresh()
 }
 
 def parse(String description)
@@ -149,6 +155,7 @@ def parse(String description)
 		]
 		if (map.name == "thermostatMode") {
 			state.lastTriedMode = map.value
+			map.data = [supportedThermostatModes:state.supportedThermostatModes]
 			if (map.value == "cool") {
 				map2.value = device.latestValue("coolingSetpoint")
 				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
@@ -172,6 +179,7 @@ def parse(String description)
 		}
 	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
 		state.lastTriedFanMode = map.value
+		map.data = [supportedThermostatFanModes: state.supportedThermostatFanModes]
 	}
 	log.debug "Parse returned $result"
 	result
@@ -305,26 +313,26 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = ""
-	if(cmd.off) { supportedModes += "off " }
-	if(cmd.heat) { supportedModes += "heat " }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
-	if(cmd.cool) { supportedModes += "cool " }
-	if(cmd.auto) { supportedModes += "auto " }
+	def supportedModes = []
+	if(cmd.off) { supportedModes << "off" }
+	if(cmd.heat) { supportedModes << "heat" }
+	if(cmd.cool) { supportedModes << "cool" }
+	if(cmd.auto) { supportedModes << "auto" }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
 
-	state.supportedModes = supportedModes
-	// No events to be generated, return empty map
+	state.supportedThermostatModes = supportedModes
+	sendEvent(name: "supportedThermostatModes", value: supportedModes, displayed: false)
 	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
-	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
-	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
+	def supportedFanModes = []
+	if(cmd.auto) { supportedFanModes << "auto" } // "fanAuto "
+	if(cmd.circulation) { supportedFanModes << "circulate" } // "fanCirculate"
+	if(cmd.low) { supportedFanModes << "on" } // "fanOn"
 
-	state.supportedFanModes = supportedFanModes
-	// No events to be generated, return empty map
+	state.supportedThermostatFanModes = supportedFanModes
+	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, displayed: false)
 	return [:]
 }
 
@@ -337,15 +345,17 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 // Command Implementations
-def poll() {
-	delayBetween([
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
+def refresh() {
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.sensorMultilevelV2.sensorMultilevelGet().format()) // current temperature
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
+	sendHubCommand(cmds)
 }
 
 def quickSetHeat(degrees) {
@@ -416,28 +426,14 @@ def ping() {
 	poll()
 }
 
-def configure() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
-}
-
 def modes() {
-	["off", "heat", "cool", "auto", "emergency heat"]
+	return state.supportedThermostatModes
 }
 
 def switchMode() {
 	def currentMode = device.currentState("thermostatMode")?.value
-	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedModes")
+	def lastTriedMode = state.lastTriedMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatModes")
 	def modeOrder = modes()
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
@@ -454,7 +450,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedModes")
+	def supportedModes = getDataByName("supportedThermostatModes")
 	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
@@ -466,9 +462,9 @@ def switchToMode(nextMode) {
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
-	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
-	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
+	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatFanModes") ?: ["auto", "on"]
+	def modeOrder = state.supportedThermostatFanModes
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
 	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
@@ -478,7 +474,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedFanModes")
+	def supportedFanModes = getDataByName("supportedThermostatFanModes")
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -58,6 +58,7 @@ metadata {
 def installed() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	response(refresh())
 }
 
 def updated() {

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -195,7 +195,10 @@ def registerDeviceChange() {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
-				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+				// For now, we will only have one subscription endpoint per device
+				state.deviceSubscriptionMap.remove(deviceId)
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,10 +27,9 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	page(name: "configureButton1")
-	page(name: "configureButton2")
-	page(name: "configureButton3")
-	page(name: "configureButton4")
+	for (def i=1; i<=8; i++) {
+		page(name: "configureButton$i")
+	}
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -60,22 +59,45 @@ def selectButton() {
 	}
 }
 
+def createPage(pageNum) {
+	if ((state.numButton == pageNum) || (pageNum == 8))
+		state.installCondition = true
+	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
+			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
+}
+
 def configureButton1() {
-	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
+	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
+	log.debug "state variable numButton: ${state.numButton}"
+	state.installCondition = false
+	createPage(1)
 }
 def configureButton2() {
-	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
-		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
+	createPage(2)
 }
 
 def configureButton3() {
-	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
-		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
+	createPage(3)
 }
+
 def configureButton4() {
-	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-		install: true, uninstall: true, getButtonSections(4))
+	createPage(4)
+}
+
+def configureButton5() {
+	createPage(5)
+}
+
+def configureButton6() {
+	createPage(6)
+}
+
+def configureButton7() {
+	createPage(7)
+}
+
+def configureButton8() {
+	createPage(8)
 }
 
 def getButtonSections(buttonNumber) {

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -202,7 +202,8 @@ def inputSelectionPage() {
 
         section("options variations") {
             paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", options: ["Thing 1", "Thing 2", "(Complicated) Thing 3"])
+            input(type: "enum", name: "selectionSimpleGrouped", title: "Simple (Grouped) options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
             input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
         }
 
@@ -214,15 +215,15 @@ def inputSelectionPage() {
 
         section("segmented") {
             paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", options: ["One"])
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", options: ["One", "Two", "Three", "Four"])
 
             paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
             input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
             input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
 
             paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
+            input(type: "enum", name: "selectionSegmentedWithDefault", style: "segmented", title: "defaulted to 'two'", options: ["One", "Two", "Three"], defaultValue: "Two")
         }
 
         section("required: true") {
@@ -231,6 +232,8 @@ def inputSelectionPage() {
 
         section("multiple: true") {
             input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
+            input(type: "enum", name: "selectionMultipleDefault1", title: "This allows multiple selections with a single default", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: "an option")
+            input(type: "enum", name: "selectionMultipleDefault2", title: "This allows multiple selections with multiple defaults", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: ["an option", "another option"])
         }
 
         section("with image") {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -72,7 +72,7 @@ def authPage() {
 		log.debug "have LIFX access token"
 
 		def options = locationOptions() ?: []
-		def count = options.size()
+		def count = options.size().toString()
 
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {