MSA-2115: Dev Type handler to provide user with buttons to control the relay (garage door control relay) and see the status for the door sensor. Without device handler, device is non-useable. Icon's chosen for it's specific application to show a garage door and open/close status icons.

devicetypes/fortrezz/telguard-gdc1.src/telguard-gdc1.groovy

@@ -0,0 +1,183 @@
+/**
+ *  Z-Wave Garage Door Opener
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Telguard GDC1", namespace: "fortrezz", author: "FortrezZ, LLC") {
+		capability "Actuator"
+		capability "Door Control"
+		capability "Garage Door Control"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Switch"
+
+        fingerprint deviceId: "0x1000", inClusters: "0x72, 0x86, 0x25"
+	}
+
+	simulator {
+		status "closed": "command: 9881, payload: 00 66 03 00"
+		status "opening": "command: 9881, payload: 00 66 03 FE"
+		status "open": "command: 9881, payload: 00 66 03 FF"
+		status "closing": "command: 9881, payload: 00 66 03 FC"
+		status "unknown": "command: 9881, payload: 00 66 03 FD"
+
+		reply "988100660100": "command: 9881, payload: 00 66 03 FC"
+		reply "9881006601FF": "command: 9881, payload: 00 66 03 FE"
+	}
+
+	tiles {
+		standardTile("toggle", "device.door", width: 2, height: 2) {
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
+		}
+		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'open', action:"door control.open", icon:"st.doors.garage.garage-opening"
+		}
+		standardTile("close", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'close', action:"door control.close", icon:"st.doors.garage.garage-closing"
+		}
+		standardTile("refresh", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+        }
+
+		main "toggle"
+		details(["toggle", "open", "close", "refresh"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+    log.debug(description)
+	if (description.startsWith("Err")) {
+	    results << createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description)
+		if (cmd) {
+			results = zwaveEvent(cmd)
+		}
+	}
+	log.debug "\"$description\" parsed to ${results.inspect()}"
+	return results
+}
+
+def open() {
+    sendEvent(name: "door", value: "opening", descriptionText: "$device.displayName: opening")
+    delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+        zwave.basicV1.basicGet().format()
+    ], 15000)
+}
+
+def close() {
+    sendEvent(name: "door", value: "closing", descriptionText: "$device.displayName: closing")
+	zwave.basicV1.basicSet(value: 0x00).format()
+}
+
+def on() {
+	open()
+}
+
+def off() {
+	close()
+}
+
+def refresh() {
+	zwave.basicV1.basicGet().format()
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+	def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+	updateDataValue("fw", fw)
+	def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+	createEvent(descriptionText: text, isStateChange: false)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationBusy cmd) {
+	def msg = cmd.status == 0 ? "try again later" :
+	          cmd.status == 1 ? "try again in $cmd.waitTime seconds" :
+	          cmd.status == 2 ? "request queued" : "sorry"
+	createEvent(displayed: true, descriptionText: "$device.displayName is busy, $msg")
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(displayed: false, descriptionText: "$device.displayName: $cmd")
+}

smartapps/fortrezz/fortrezz-mimo2-b-side.src/fortrezz-mimo2-b-side.groovy

@@ -1,131 +0,0 @@
-/**
- *  FortrezZ MIMO2+ B-Side
- *
- *  Copyright 2016 FortrezZ, LLC
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "FortrezZ MIMO2+ B-Side",
-    namespace: "fortrezz",
-    author: "FortrezZ, LLC",
-    description: "Breaks the MIMO2 into two separate devices to allow automation on SIG2 and Relay 2.",
-    category: "Convenience",
-    iconUrl: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square-200-1.png",
-    iconX2Url: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square-500.png",
-    iconX3Url: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square.png",
-    singleInstance: true)
-
-
-preferences {
-	section("Title") {
-		input(name: "devices", type: "capability.voltageMeasurement", title: "MIMO2 devices", description: null, required: true, submitOnChange: true, multiple: true)
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize(){
-	log.debug("Devices: ${settings.devices}")
-    settings.devices.each {//deviceId ->
-    	subscribe(it, "powered", events)
-    	subscribe(it, "switch2", events)
-    	subscribe(it, "contact2", events)
-    	subscribe(it, "voltage2", events)
-    	subscribe(it, "relay2", events)
-    	subscribe(it, "anaDig2", events)
-        
-        try {
-            def existingDevice = getChildDevice(it.id)
-            if(!existingDevice) {
-	            log.debug("Device ID: ${existingDevice}")
-                def childDevice = addChildDevice("fortrezz", "FortrezZ MIMO2+ B-Side", it.id, null, [name: "Device.${it.id}", label: "${it.name} B-Side", completedSetup: true])
-            }
-        } catch (e) {
-            log.error "Error creating device: ${e}"
-        }
-    }
-    
-    getChildDevices().each {
-    	def test = it
-        def search = settings.devices.find { getChildDevice(it.id).id == test.id }
-        if(!search) {
-        	removeChildDevices(test)
-        }
-    }
-}
-
-def uninstalled() {
-    removeChildDevices(getChildDevices())
-}
-
-private removeChildDevices(delete) {
-    delete.each {
-        deleteChildDevice(it.deviceNetworkId)
-    }
-}
-
-def on2(child) {
-	log.debug("on2")
-    def ret = child
-    settings.devices.each {//deviceId ->
-        def ch = getChildDevice(it.id)
-        if(child == ch.id) {
-        	ret = "${child}, ${it.id}"
-        	it.on2()
-        }
-    }
-    return ret
-}
-
-def off2(child) {
-	log.debug("off2")
-    def ret = child
-    settings.devices.each {//deviceId ->
-        def ch = getChildDevice(it.id)
-        if(child == ch.id) {
-        	ret = "${child}, ${it.id}"
-        	it.off2()
-        }
-    }
-    return ret
-}
-
-def refresh2(child) {
-	log.debug("refresh2")
-    def ret = child
-    settings.devices.each {//deviceId ->
-        def ch = getChildDevice(it.id)
-        if(child == ch.id) {
-        	ret = "${child}, ${it.id}"
-        	it.refresh()
-        }
-    }
-    return ret
-}
-
-def events(evt) {
-	def ch = getChildDevice(evt.device.id)
-    ch.eventParse(evt);
-	log.debug("${evt.device.id} triggered ${evt.name}")
-}
-// TODO: implement event handlers