MSA-2115: Dev Type handler to provide user with buttons to control the relay (garage door control relay) and see the status for the door sensor. Without device handler, device is non-useable. Icon's chosen for it's specific application to show a garage door and open/close status icons.

devicetypes/fortrezz/telguard-gdc1.src/telguard-gdc1.groovy

@@ -0,0 +1,183 @@
+/**
+ *  Z-Wave Garage Door Opener
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Telguard GDC1", namespace: "fortrezz", author: "FortrezZ, LLC") {
+		capability "Actuator"
+		capability "Door Control"
+		capability "Garage Door Control"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Switch"
+
+        fingerprint deviceId: "0x1000", inClusters: "0x72, 0x86, 0x25"
+	}
+
+	simulator {
+		status "closed": "command: 9881, payload: 00 66 03 00"
+		status "opening": "command: 9881, payload: 00 66 03 FE"
+		status "open": "command: 9881, payload: 00 66 03 FF"
+		status "closing": "command: 9881, payload: 00 66 03 FC"
+		status "unknown": "command: 9881, payload: 00 66 03 FD"
+
+		reply "988100660100": "command: 9881, payload: 00 66 03 FC"
+		reply "9881006601FF": "command: 9881, payload: 00 66 03 FE"
+	}
+
+	tiles {
+		standardTile("toggle", "device.door", width: 2, height: 2) {
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
+		}
+		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'open', action:"door control.open", icon:"st.doors.garage.garage-opening"
+		}
+		standardTile("close", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'close', action:"door control.close", icon:"st.doors.garage.garage-closing"
+		}
+		standardTile("refresh", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+        }
+
+		main "toggle"
+		details(["toggle", "open", "close", "refresh"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+    log.debug(description)
+	if (description.startsWith("Err")) {
+	    results << createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description)
+		if (cmd) {
+			results = zwaveEvent(cmd)
+		}
+	}
+	log.debug "\"$description\" parsed to ${results.inspect()}"
+	return results
+}
+
+def open() {
+    sendEvent(name: "door", value: "opening", descriptionText: "$device.displayName: opening")
+    delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+        zwave.basicV1.basicGet().format()
+    ], 15000)
+}
+
+def close() {
+    sendEvent(name: "door", value: "closing", descriptionText: "$device.displayName: closing")
+	zwave.basicV1.basicSet(value: 0x00).format()
+}
+
+def on() {
+	open()
+}
+
+def off() {
+	close()
+}
+
+def refresh() {
+	zwave.basicV1.basicGet().format()
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+	def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+	updateDataValue("fw", fw)
+	def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+	createEvent(descriptionText: text, isStateChange: false)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationBusy cmd) {
+	def msg = cmd.status == 0 ? "try again later" :
+	          cmd.status == 1 ? "try again in $cmd.waitTime seconds" :
+	          cmd.status == 2 ? "request queued" : "sorry"
+	createEvent(displayed: true, descriptionText: "$device.displayName is busy, $msg")
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(displayed: false, descriptionText: "$device.displayName: $cmd")
+}

devicetypes/garth/devolo-humidity-sensor.src/devolo-humidity-sensor.groovy

@@ -1,188 +0,0 @@
-/**
- *  Devolo Humidity Sensor
- *
- *  Copyright 2017 Garth Williams
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *
- *  Based on definition (name: "Aeon Multisensor 6", namespace: "smartthings", author: "SmartThings")
- *
- */
-metadata {
-	definition (name: "Devolo Humidity Sensor", namespace: "garth", author: "Garth Williams") {
-		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Battery"
-		capability "Health Check"
-        
-        attribute "batteryStatus", "string"
-        
-        fingerprint mfr: "0175", prod: "0002", model: "0020"
-	}
-
-	simulator {
-		for (int i = 0; i <= 100; i += 20) {
-			status "temperature ${i}F": new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-				new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-					scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1)
-				).incomingMessage()
-		}
-
-		for (int i = 0; i <= 100; i += 20) {
-			status "humidity ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-				new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(scaledSensorValue: i, sensorType: 5)
-			).incomingMessage()
-		}
-
-		for (int i in [0, 5, 10, 15, 50, 99, 100]) {
-			status "battery ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-				new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i)
-			).incomingMessage()
-		}
-		status "low battery alert":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-			new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: 255)
-		).incomingMessage()
-
-		status "wake up" : "command: 8407, payload: "
-	}
-
-	preferences {
-	}
-
-	tiles(scale: 2) {
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 32, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 98, color: "#bc2323"]
-			]
-		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
-		}
-
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		valueTile("batteryStatus", "device.batteryStatus", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "batteryStatus", label:'${currentValue}', unit:""
-		}
-
-		main(["temperature", "humidity"])
-		details(["temperature", "humidity", "batteryStatus"])
-	}
-}
-
-def parse(String description) {
-	log.debug "parse() >> description: $description"
-	def result = null
-	if (description.startsWith("Err 106")) {
-		log.debug "parse() >> Err 106"
-		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description != "updated") {
-		log.debug "parse() >> zwave.parse(description)"
-		def cmd = zwave.parse(description, [0x31: 5, 0x30: 2, 0x84: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x30: 2, 0x84: 1])
-	state.sec = 1
-	log.debug "encapsulated: ${encapsulatedCommand}"
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		createEvent(descriptionText: cmd.toString())
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-	log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
-	state.sec = 1
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
-	state.sec = 1
-	log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
-	def result = [createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true)]
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} battery is low"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	state.lastbatt = now()
-	result << createEvent(map)
-	if (device.latestValue("powerSupply") != "USB Cable"){
-		result << createEvent(name: "batteryStatus", value: "${map.value} % battery", displayed: false)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 1:
-			map.name = "temperature"
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			break
-		case 5:
-			map.name = "humidity"
-			map.value = cmd.scaledSensorValue.toInteger()
-			map.unit = "%"
-			break
-		default:
-			map.descriptionText = cmd.toString()
-	}
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-	log.debug "ConfigurationReport: $cmd"
-	def result = []
-	def value
-	if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 1) {
-		value = "Battery"
-		result << createEvent(name: "powerSupply", value: value, displayed: false)
-	} else if (cmd.parameterNumber == 101){
-		result << response(configure())
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "General zwaveEvent cmd: ${cmd}"
-	createEvent(descriptionText: cmd.toString(), isStateChange: false)
-}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -133,8 +133,8 @@ def updated() {
 }
 
 def initialize() {
-	// Device only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -111,6 +111,7 @@ def configure() {
 	return cmds
 }
 
+
 def installed() {
 	initialize()
 }
@@ -120,7 +121,7 @@ def updated() {
 }
 
 def initialize() {
-	// Device only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -72,7 +72,7 @@ def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 
 def poll() {
 	if (secondsPast(state.lastbatt, 36*60*60)) {
-		return zwave.batteryV1.batteryGet().format()
+		return zwave.batteryV1.batteryGet().format
 	} else {
 		return null
 	}