MSA-615: Add control for the indicator light on the enerwave zw15sm switch. This is a modification to the stock metering switch device type.

Adds capabilities "Temperature Measurement" and "Relative Humidity Me…

devicetypes/smartthings/enerwave-zw15sm-metering-switch.src/enerwave-zw15sm-metering-switch.groovy

@@ -0,0 +1,249 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ * modified by lgkahn v1 for control of the on/off light
+ * the lite when on/off is not the normal parameter settings of the config class and there also
+ * is no never lite option.. So custom code for this device only.
+ *
+ */
+metadata {
+	definition (name: "Enerwave ZW15SM Metering Switch", namespace: "smartthings", author: "LGKahn") {
+		capability "Energy Meter"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Polling"
+		capability "Refresh"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Indicator"
+        
+      
+        
+		fingerprint inClusters: "0x25,0x32"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		for (int i = 0; i <= 10000; i += 1000) {
+			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 10) {
+			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
+		}
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+
+	}
+
+	// tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+		valueTile("power", "device.power") {
+			state "default", label:'${currentValue} W'
+		}
+		valueTile("energy", "device.energy") {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		standardTile("indicatorStatus", "device.indicatorStatus", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
+			state "when on", action:"indicator.indicatorWhenOff", icon:"st.indicators.lit-when-on"
+		
+		}
+		main(["switch","power","energy"])
+		details(["switch","power","energy","indicatorStatus","refresh","reset"])
+	}
+}
+
+def updated() {
+	try {
+		if (!state.MSR) {
+			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
+		}
+	} catch (e) { log.debug e }
+}
+
+def parse(String description) {
+	def result = null
+    //log.debug "in parse desc = $description"
+    
+	if(description == "updated") return 
+	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+	return result
+}
+
+
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+	} else if (cmd.scale == 1) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
+	} else if (cmd.scale == 2) {
+		createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	def evt = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "physical")
+	if (evt.isStateChange) {
+		[evt, response(["delay 3000", zwave.meterV2.meterGet(scale: 2).format()])]
+	} else {
+		evt
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+
+   // log.debug "in config report  got indicatorstatus = $state.currentIndicatorStatus"	
+	[name: "indicatorStatus", value: state.currentIndicatorStatus, display: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	// retypeBasedOnMSR()
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr.startsWith("0086") && !state.aeonconfig) {  // Aeon Labs meter
+		state.aeonconfig = 1
+		result << response(delayBetween([
+			zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // report power in watts
+			zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // report energy in kWh
+			zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
+			//zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	} else {
+		result << response(delayBetween([
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "$device.displayName: Unhandled: $cmd"
+	[:]
+}
+
+def on() {
+
+log.debug "in on"
+	[
+    
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def off() {
+log.debug "in off"
+	[
+    	zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def refresh() {
+	def value = "when off"
+   
+    log.debug "in refresh for whenon got indicatorstatus = $state.currentIndicatorStatus"
+    sendEvent(name: "indicatorStatus", value: state.currentIndicatorStatus, display: true)
+	
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def configure() {
+	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+}
+
+def reset() {
+			 state.currentIndicatorStatus = "when on"
+	return [
+		zwave.meterV2.meterReset().format(),
+		zwave.meterV2.meterGet(scale: 0).format()
+	]
+}
+
+
+
+
+def indicatorWhenOn() {
+log.debug "in when on"
+ state.currentIndicatorStatus = "when on"
+	sendEvent(name: "indicatorStatus", value: "when on", display: true)
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 1).format()
+	}
+
+def indicatorWhenOff() {
+log.debug "in when off"
+ state.currentIndicatorStatus = "when off"
+	sendEvent(name: "indicatorStatus", value: "when off", display: true)	  
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 0).format()
+	}
+
+
+

devicetypes/zenwithin/zen-thermostat.src/zen-thermostat.groovy

@@ -8,6 +8,7 @@ metadata {
   definition (name: "Zen Thermostat", namespace: "zenwithin", author: "ZenWithin") {
     capability "Actuator"
     capability "Thermostat"
+    capability "Temperature Measurement"
     capability "Configuration"
     capability "Refresh"
     capability "Sensor"

smartapps/jls/bathroom-lights.src/bathroom-lights.groovy

@@ -1,86 +0,0 @@
-/**
- *  Bathroom Lights
- *
- *  Copyright 2015 Jesse Silverberg
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Bathroom Lights",
-    namespace: "JLS",
-    author: "Jesse Silverberg",
-    description: "A specialized bathroom lighting automation.  Turns lights on with motion, dims after a custom period of time to give the occupant a warning that lights will turn off soon, and then turns off the lights unless motion is detected again.  Motion brightens the lights back up.  Perfect for showering so you don't get left in the dark, and solves the problem of motion detection during lights-off dimming transitions.",
-    category: "Convenience",
-    iconUrl: "https://www.dropbox.com/s/6kxtd2v5reggonq/lightswitch.gif?raw=1",
-    iconX2Url: "https://www.dropbox.com/s/6kxtd2v5reggonq/lightswitch.gif?raw=1",
-    iconX3Url: "https://www.dropbox.com/s/6kxtd2v5reggonq/lightswitch.gif?raw=1")
-
-
-preferences {
-
-	section("Select devices") {
-		input "lights", "capability.switchLevel", title:"Bathroom lights", multiple: true  , required: true      
-		input "motionSensor", "capability.motionSensor", title: "Bathroom motion sensor(s)", multiple: true, required: true
-    }
-    section("Brightness and timing options") {
-        input "dimLevelHi", "number", title: "Brighten lights to this level (0-100)...", required: true
-        input "brightenTimeHi", "number", title: "Hold lights here for this long (minutes)...", required: true
-        input "dimLevelLow", "number", title: "Then dim lights to this level (0-100)...", required: true
-    	input "brightenTimeLow", "number", title: "And turn off after this long (minutes)...", required: true
-	}
-    
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-    subscribe(motionSensor, "motion.active", motionDetectedHandler)
-    subscribe(motionSensor, "motion.inactive", motionStoppedHandler)
-}
-
-def motionDetectedHandler(evt) {
-	log.debug "motionDetectedHandler called: $evt"
-    unschedule()
-    lights.setLevel(dimLevelHi)
-}
-
-def motionStoppedHandler(evt) {
-	log.debug "motionStoppedHandler called: $evt"
-    
-    def noMotion = motionSensor.find{it.currentMotion == "active"} == null
-    if (noMotion) {
-    	log.debug "motionStoppedHandler found no motion on all sensors"
-    	log.debug "Scheduling lights to dim and turn off"
-    	runIn(60 * brightenTimeHi, dimLights)
-    	runIn(60 * (brightenTimeHi + brightenTimeLow), offLights)
-    }
-}
-
-def dimLights() {
-    log.debug "Dimming lights $lights to $dimLeveLow"
-	lights.setLevel(dimLevelLow)
-}
-
-def offLights() {
-	log.debug "Turning off lights $lights"
-	lights.off()
-}
-