MSA-615: Add control for the indicator light on the enerwave zw15sm switch. This is a modification to the stock metering switch device type.

Adds capabilities "Temperature Measurement" and "Relative Humidity Me…

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -0,0 +1,506 @@
+/**
+ *  Keen Home Smart Vent
+ *
+ *  Author: Keen Home
+ *  Date: 2015-06-23
+ */
+
+metadata {
+    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Gregg Altschul") {
+        capability "Switch Level"
+        capability "Switch"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Temperature Measurement"
+        capability "Battery"
+
+        command "getLevel"
+        command "getOnOff"
+        command "getPressure"
+        command "getBattery"
+        command "getTemperature"
+        command "setZigBeeIdTile"
+
+        fingerprint endpoint: "1",
+        profileId: "0104",
+        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
+        outClusters: "0019"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles {
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
+            state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
+            state "obstructed", action: "switch.off", icon:"st.vents.vent-closed", backgroundColor:"#ff0000"
+        }
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
+            state "level", action:"switch level.setLevel"
+        }
+        standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        valueTile("temperature", "device.temperature", inactiveLabel: false) {
+            state "temperature", label:'${currentValue}°',
+            backgroundColors:[
+                [value: 31, color: "#153591"],
+                [value: 44, color: "#1e9cbb"],
+                [value: 59, color: "#90d2a7"],
+                [value: 74, color: "#44b621"],
+                [value: 84, color: "#f1d801"],
+                [value: 95, color: "#d04e00"],
+                [value: 96, color: "#bc2323"]
+            ]
+        }
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+            state "battery", label: 'Battery \n${currentValue}%', backgroundColor:"#ffffff"
+        }
+        valueTile("zigbeeId", "device.zigbeeId", inactiveLabel: true, decoration: "flat") {
+            state "serial", label:'${currentValue}', backgroundColor:"#ffffff"
+        }
+        main "switch"
+        details(["switch","refresh","temperature","levelSliderControl","battery"])
+    }
+}
+
+/**** PARSE METHODS ****/
+def parse(String description) {
+    log.debug "description: $description"
+
+    Map map = [:]
+    if (description?.startsWith('catchall:')) {
+        map = parseCatchAllMessage(description)
+    }
+    else if (description?.startsWith('read attr -')) {
+        map = parseReportAttributeMessage(description)
+    }
+    else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+        map = parseCustomMessage(description)
+    }
+    else if (description?.startsWith('on/off: ')) {
+        map = parseOnOffMessage(description)
+    }
+
+    log.debug "Parse returned $map"
+    return map ? createEvent(map) : null
+}
+
+private Map parseCatchAllMessage(String description) {
+    log.debug "parseCatchAllMessage"
+
+    def cluster = zigbee.parse(description)
+    log.debug "cluster: ${cluster}"
+    if (shouldProcessMessage(cluster)) {
+        log.debug "processing message"
+        switch(cluster.clusterId) {
+            case 0x0001:
+                return makeBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = convertTemperatureHex(temp)
+                return makeTemperatureResult(value)
+                break
+
+            case 0x0006:
+                return makeOnOffResult(cluster.data[-1])
+                break
+        }
+    }
+
+    return [:]
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    if (cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)) {
+        return false
+    }
+
+    return true
+}
+
+private Map parseReportAttributeMessage(String description) {
+    log.debug "parseReportAttributeMessage"
+
+    Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+    log.debug "Desc Map: $descMap"
+
+    if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+        return makeOnOffResult(Int.parseInt(descMap.value));
+    }
+    else if (descMap.cluster == "0008" && descMap.attrId == "0000") {
+        return makeLevelResult(descMap.value)
+    }
+    else if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+        def value = convertTemperatureHex(descMap.value)
+        return makeTemperatureResult(value)
+    }
+    else if (descMap.cluster == "0001" && descMap.attrId == "0021") {
+        return makeBatteryResult(Integer.parseInt(descMap.value, 16))
+    }
+    else if (descMap.cluster == "0403" && descMap.attrId == "0020") {
+        return makePressureResult(Integer.parseInt(descMap.value, 16))
+    }
+    else if (descMap.cluster == "0000" && descMap.attrId == "0006") {
+        return makeSerialResult(new String(descMap.value.decodeHex()))
+    }
+
+    // shouldn't get here
+    return [:]
+}
+
+private Map parseCustomMessage(String description) {
+    Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        // log.debug "${description}"
+        // def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+        // log.debug "split: " + description.split(": ")
+        def value = Double.parseDouble(description.split(": ")[1])
+        // log.debug "${value}"
+        resultMap = makeTemperatureResult(convertTemperature(value))
+    }
+    return resultMap
+}
+
+private Map parseOnOffMessage(String description) {
+    Map resultMap = [:]
+    if (description?.startsWith('on/off: ')) {
+        def value = Integer.parseInt(description - "on/off: ")
+        resultMap = makeOnOffResult(value)
+    }
+    return resultMap
+}
+
+private Map makeOnOffResult(rawValue) {
+    log.debug "makeOnOffResult: ${rawValue}"
+    def linkText = getLinkText(device)
+    def value = rawValue == 1 ? "on" : "off"
+    return [
+        name: "switch",
+        value: value,
+        descriptionText: "${linkText} is ${value}"
+    ]
+}
+
+private Map makeLevelResult(rawValue) {
+    def linkText = getLinkText(device)
+    // log.debug "rawValue: ${rawValue}"
+    def value = Integer.parseInt(rawValue, 16)
+    def rangeMax = 254
+
+    if (value == 255) {
+        log.debug "obstructed"
+        // Just return here. Once the vent is power cycled
+        // it will go back to the previous level before obstruction.
+        // Therefore, no need to update level on the display.
+        return [
+            name: "switch",
+            value: "obstructed",
+            descriptionText: "${linkText} is obstructed. Please power cycle."
+        ]
+    } else if ( device.currentValue("switch") == "obstructed" &&
+                value == 254)  {
+        // When the device is reset after an obstruction, the switch
+        // state will be obstructed and the value coming from the device
+        // will be 254. Since we're not using heating/cooling mode from
+        // the device type handler, we need to bump it down to the lower
+        // (cooling) range
+        sendEvent(makeOnOffResult(1)) // clear the obstructed switch state
+        value = rangeMax
+    }
+    // else if (device.currentValue("switch") == "off") {
+    //     sendEvent(makeOnOffResult(1)) // turn back on if in off state
+    // }
+
+
+    // log.debug "pre-value: ${value}"
+    value = Math.floor(value / rangeMax * 100)
+    // log.debug "post-value: ${value}"
+
+    return [
+        name: "level",
+        value: value,
+        descriptionText: "${linkText} level is ${value}%"
+    ]
+}
+
+private Map makePressureResult(rawValue) {
+    log.debug 'makePressureResut'
+    def linkText = getLinkText(device)
+
+    def pascals = rawValue / 10
+    def result = [
+        name: 'pressure',
+        descriptionText: "${linkText} pressure is ${pascals}Pa",
+        value: pascals
+    ]
+
+    return result
+}
+
+private Map makeBatteryResult(rawValue) {
+    // log.debug 'makeBatteryResult'
+    def linkText = getLinkText(device)
+
+    // log.debug
+    [
+        name: 'battery',
+        value: rawValue,
+        descriptionText: "${linkText} battery is at ${rawValue}%"
+    ]
+}
+
+private Map makeTemperatureResult(value) {
+    // log.debug 'makeTemperatureResult'
+    def linkText = getLinkText(device)
+
+    // log.debug "tempOffset: ${tempOffset}"
+    if (tempOffset) {
+        def offset = tempOffset as int
+        // log.debug "offset: ${offset}"
+        def v = value as int
+        // log.debug "v: ${v}"
+        value = v + offset
+        // log.debug "value: ${value}"
+    }
+
+    return [
+        name: 'temperature',
+        value: "" + value,
+        descriptionText: "${linkText} is ${value}°${temperatureScale}",
+    ]
+}
+
+/**** HELPER METHODS ****/
+private def convertTemperatureHex(value) {
+    // log.debug "convertTemperatureHex(${value})"
+    def celsius = Integer.parseInt(value, 16).shortValue() / 100
+    // log.debug "celsius: ${celsius}"
+
+    return convertTemperature(celsius)
+}
+
+private def convertTemperature(celsius) {
+    // log.debug "convertTemperature()"
+
+    if(getTemperatureScale() == "C"){
+        return celsius
+    } else {
+        def fahrenheit = Math.round(celsiusToFahrenheit(celsius) * 100) /100
+        // log.debug "converted to F: ${fahrenheit}"
+        return fahrenheit
+    }
+}
+
+private def makeSerialResult(serial) {
+    log.debug "makeSerialResult: " + serial
+
+    def linkText = getLinkText(device)
+    sendEvent([
+        name: "serial",
+        value: serial,
+        descriptionText: "${linkText} has serial ${serial}" ])
+    return [
+        name: "serial",
+        value: serial,
+        descriptionText: "${linkText} has serial ${serial}" ]
+}
+/**** COMMAND METHODS ****/
+// def mfgCode() {
+// 	 ["zcl mfg-code 0x115B", "delay 200"]
+// }
+
+def on() {
+    log.debug "on()"
+    sendEvent(makeOnOffResult(1))
+    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+}
+
+def off() {
+    log.debug "off()"
+    sendEvent(makeOnOffResult(0))
+    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+}
+
+// does this work?
+def toggle() {
+    log.debug "toggle()"
+
+    "st cmd 0x${device.deviceNetworkId} 1 6 2 {}"
+}
+
+def setLevel(value) {
+    log.debug "setting level: ${value}"
+
+    def linkText = getLinkText(device)
+
+    sendEvent(name: "level", value: value)
+    if (value > 0) {
+        sendEvent(name: "switch", value: "on", descriptionText: "${linkText} is on by setting a level")
+    }
+    else {
+        sendEvent(name: "switch", value: "off", descriptionText: "${linkText} is off by setting level to 0")
+    }
+    def rangeMax = 254
+    def computedLevel = Math.round(value * rangeMax / 100)
+    log.debug "computedLevel: ${computedLevel}"
+
+    def level = new BigInteger(computedLevel.toString()).toString(16)
+    log.debug "level: ${level}"
+
+    if (level.size() < 2){
+        level = '0' + level
+    }
+
+    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 0000}"
+}
+
+
+def getOnOff() {
+    log.debug "getOnOff()"
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0006 0"]
+}
+
+def getPressure() {
+    log.debug "getPressure()"
+    [
+        "zcl mfg-code 0x115B", "delay 200",
+        "zcl global read 0x0403 0x20", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 200"
+    ]
+}
+
+def getLevel() {
+    log.debug "getLevel()"
+    // rattr = read attribute
+    // 0x${} = device net id
+    // 1 = endpoint
+    // 8 = cluster id (level control, in this case)
+    // 0 = attribute within cluster
+    // sendEvent(name: "level", value: value)
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"]
+}
+
+def getTemperature() {
+    log.debug "getTemperature()"
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0402 0"]
+}
+
+def getBattery() {
+    log.debug "getBattery()"
+
+    ["st rattr 0x${device.deviceNetworkId} 1 0x0001 0x0021"]
+}
+
+def setZigBeeIdTile() {
+    log.debug "setZigBeeIdTile() - ${device.zigbeeId}"
+
+    def linkText = getLinkText(device)
+
+    sendEvent([
+        name: "zigbeeId",
+        value: device.zigbeeId,
+        descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ])
+	return [
+        name: "zigbeeId",
+        value: device.zigbeeId,
+        descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ]
+}
+
+def refresh() {
+	getOnOff() +
+    getLevel() +
+    getTemperature() +
+    getPressure() +
+    getBattery()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+def configure() {
+    log.debug "CONFIGURE"
+    log.debug "zigbeeId: ${device.hub.zigbeeId}"
+
+    setZigBeeIdTile()
+
+    def configCmds = [
+        // binding commands
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500",
+        
+        // configure report commands
+        // [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
+
+        // mike 2015/06/22: preconfigured; see tech spec
+        // vent on/off state - type: boolean, change: 1
+        // "zcl global send-me-a-report 6 0 0x10 5 60 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // mike 2015/06/22: preconfigured; see tech spec
+        // vent level - type: int8u, change: 1
+        // "zcl global send-me-a-report 8 0 0x20 5 60 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // mike 2015/06/22: temp and pressure reports are preconfigured, but
+        //   we'd like to override their settings for our own purposes
+        // temperature - type: int16s, change: 0xA = 10 = 0.1C
+        "zcl global send-me-a-report 0x0402 0 0x29 10 60 {0A00}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        // mike 2015/06/22: use new custom pressure attribute
+        // pressure - type: int32u, change: 1 = 0.1Pa
+        "zcl mfg-code 0x115B", "delay 200",
+        "zcl global send-me-a-report 0x0403 0x20 0x22 10 60 {010000}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500"
+
+        // mike 2015/06/22: preconfigured; see tech spec
+        // battery - type: int8u, change: 1
+        // "zcl global send-me-a-report 1 0x21 0x20 60 3600 {01}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+    ]
+
+    return configCmds + refresh()
+}

devicetypes/smartthings/aeon-home-energy-meter-c3.src/aeon-home-energy-meter-c3.groovy

@@ -56,7 +56,7 @@ metadata {
 			state "configure", label: '', action: "configuration.configure", icon: "st.secondary.configure"
 		}
 
-		PLATFORM_graphTile(name: "powerGraph", attribute: "device.power")
+		graphTile(name: "powerGraph", attribute: "device.power")
 
 		main(["power", "energy"])
 		details(["powerGraph", "power", "energy", "reset", "refresh", "configure"])
@@ -68,16 +68,8 @@ metadata {
 // ========================================================
 
 preferences {
-	input name: "graphPrecision", type: "enum", title: "Graph Precision", description: "Daily", required: true, options: PLATFORM_graphPrecisionOptions(), defaultValue: "Daily"
-	input name: "graphType", type: "enum", title: "Graph Type", description: selectedGraphType(), required: false, options: PLATFORM_graphTypeOptions()
-}
-
-def selectedGraphPrecision() {
-	graphPrecision ?: "Daily"
-}
-
-def selectedGraphType() {
-	graphType ?: "line"
+	input name: "graphPrecision", type: "enum", title: "Graph Precision", description: "Daily", required: true, options: graphPrecisionOptions(), defaultValue: "Daily"
+	input name: "graphType", type: "enum", title: "Graph Type", description: "line", required: false, options: graphTypeOptions()
 }
 
 // ========================================================
@@ -91,22 +83,6 @@ mappings {
 			GET: "renderGraph"
 		]
 	}
-	path("/graphDataSizes") { // for testing. remove before publishing
-		action:
-		[
-			GET: "graphDataSizes"
-		]
-	}
-}
-
-def graphDataSizes() { // for testing. remove before publishing
-	state.findAll { k, v -> k.startsWith("measure.") }.inject([:]) { attributes, attributeData ->
-		attributes[attributeData.key] = attributeData.value.inject([:]) { dateTypes, dateTypeData ->
-			dateTypes[dateTypeData.key] = dateTypeData.value.size()
-			dateTypes
-		}
-		attributes
-	}
 }
 
 // ========================================================
@@ -121,8 +97,7 @@ def parse(String description) {
 	}
 	log.debug "Parse returned ${result?.descriptionText}"
 
-	PLATFORM_migrateGraphDataIfNeeded()
-	PLATFORM_storeData(result.name, result.value)
+	storeGraphData(result.name, result.value)
 
 	return result
 }
@@ -176,535 +151,15 @@ def configure() {
 
 def renderGraph() {
 
-	def data = PLATFORM_fetchGraphData(params.attribute)
+	def data = fetchGraphData(params.attribute)
 
 	def totalData = data*.runningSum
 
 	def xValues = data*.unixTime
 
 	def yValues = [
-		Total: [color: "#49a201", data: totalData, type: selectedGraphType()]
+		Total: [color: "#49a201", data: totalData]
 	]
 
-	PLATFORM_renderGraph(attribute: params.attribute, xValues: xValues, yValues: yValues, focus: "Total", label: "Watts")
-}
-
-// TODO: // ========================================================
-// TODO: // PLATFORM CODE !!! DO NOT ALTER !!!
-// TODO: // ========================================================
-
-// ========================================================
-// PLATFORM TILES
-// ========================================================
-
-def PLATFORM_graphTile(Map tileParams) {
-	def cleanAttribute = tileParams.attribute - "device." - "capability."
-	htmlTile([name: tileParams.name, attribute: tileParams.attribute, action: "graph/${cleanAttribute}", width: 3, height: 2] + tileParams)
-}
-
-// ========================================================
-// PLATFORM GRAPH RENDERING
-// ========================================================
-
-private PLATFORM_graphTypeOptions() {
-	[
-		"line", // DEFAULT
-		"spline",
-		"step",
-		"area",
-		"area-spline",
-		"area-step",
-		"bar",
-		"scatter",
-		"pie",
-		"donut",
-		"gauge",
-	]
-}
-
-private PLATFORM_renderGraph(graphParams) {
-
-	String attribute = graphParams.attribute
-	List xValues = graphParams.xValues
-	Map yValues = graphParams.yValues
-	String focus = graphParams.focus ?: ""
-	String label = graphParams.label ?: ""
-
-	/*
-	def xValues = [1, 2]
-
-	def yValues = [
-			High: [type: "spline", data: [5, 6], color: "#bc2323"],
-			Low: [type: "spline", data: [0, 1], color: "#153591"]
-	]
-
-	Available type values:
-	line 	// DEFAULT
-	spline
-	step
-	area
-	area-spline
-	area-step
-	bar
-	scatter
-	pie
-	donut
-	gauge
-
-*/
-
-	def graphData = PLATFORM_buildGraphData(xValues, yValues, label)
-
-	def legendData = yValues*.key
-	def focusJS = focus ? "chart.focus('${focus}')" : "// focus not specified"
-	def flowColumn = focus ?: yValues ? yValues.keySet().first() : null
-
-	def htmlTitle = "${(device.label ?: device.name)} ${attribute.capitalize()} Graph"
-	renderHTML(htmlTitle) { html ->
-		html.head {
-			"""
-			<!-- Load c3.css -->
-			<link href="https://www.dropbox.com/s/m6ptp72cw4nx0sp/c3.css?dl=1" rel="stylesheet" type="text/css">
-
-			<!-- Load d3.js and c3.js -->
-			<script src="https://www.dropbox.com/s/9x22jyfu5qyacpp/d3.v3.min.js?dl=1" charset="utf-8"></script>
-			<script src="https://www.dropbox.com/s/to7dtcn403l7mza/c3.js?dl=1"></script>
-
-			<script>
-			function getDocumentHeight() {
-				var body = document.body;
-				var html = document.documentElement;
-
-				return html.clientHeight;
-			}
-			function getDocumentWidth() {
-				var body = document.body;
-				var html = document.documentElement;
-
-				return html.clientWidth;
-			}
-			</script>
-
-			<style>
-				.legend {
-					position: absolute;
-					width: 80%;
-					padding-left: 15%;
-					z-index: 999;
-					padding-top: 5px;
-				}
-				.legend span {
-					width: ${100 / yValues.size()}%;
-					display: inline-block;
-					text-align: center;
-					cursor: pointer;
-					color: white;
-				}
-			</style>
-			"""
-		}
-		html.body {
-			"""
-			<div class="legend"></div>
-			<div id="chart" style="max-height: 120px; position: relative;"></div>
-
-			<script>
-
-			// Generate the chart
-			var chart = c3.generate(${graphData as grails.converters.JSON});
-
-			// Resize the chart to the size of the device tile
-			chart.resize({height:getDocumentHeight(), width:getDocumentWidth()});
-
-			// Focus data if specified
-			${focusJS}
-
-			// Update the chart when ${attribute} events are received
-			function ${attribute}(evt) {
-				var newValue = ['${flowColumn}'];
-				newValue.push(evt.value);
-
-				var newX = ['x'];
-				newX.push(evt.unixTime);
-
-				chart.flow({
-					columns: [
-						newX,
-						newValue
-					]
-				});
-			}
-
-			// Build the custom legend
-			d3.select('.legend').selectAll('span')
-    		.data(${legendData as grails.converters.JSON})
-  			.enter().append('span')
-    		.attr('data-id', function (id) { return id; })
-    		.html(function (id) { return id; })
-    		.each(function (id) {
-        	d3.select(this).style('background-color', chart.color(id));
-    		})
-    		.on('mouseover', function (id) {
-     	   chart.focus(id);
-    		})
-    		.on('mouseout', function (id) {
-        	chart.revert();
-    		})
-    		.on('click', function (id) {
-        	chart.toggle(id);
-    		});
-
-			</script>
-			"""
-		}
-	}
-}
-
-private PLATFORM_buildGraphData(List xValues, Map yValues, String label = "") {
-
-	/*
-	def xValues = [1, 2]
-
-	def yValues = [
-			High: [type: "spline", data: [5, 6], color: "#bc2323"],
-			Low: [type: "spline", data: [0, 1], color: "#153591"]
-	]
-	*/
-
-	[
-		interaction: [
-			enabled: false
-		],
-		bindto     : '#chart',
-		padding    : [
-			left  : 30,
-			right : 30,
-			bottom: 0,
-			top   : 0
-		],
-		legend     : [
-			show: false,
-//			hide    : false,//(yValues.keySet().size() < 2),
-//			position: 'inset',
-//            inset: [
-//            	anchor: "top-right"
-//            ],
-//            item: [
-//            	onclick: "do nothing" // (yValues.keySet().size() > 1) ? null : "do nothing"
-//            ]
-		],
-		data       : [
-			x      : "x",
-			columns: [(["x"] + xValues)] + yValues.collect { k, v -> [k] + v.data },
-			types  : yValues.inject([:]) { total, current -> total[current.key] = current.value.type; return total },
-			colors : yValues.inject([:]) { total, current -> total[current.key] = current.value.color; return total }
-		],
-		axis       : [
-			x: [
-				type: 'timeseries',
-				tick: [
-					centered: true,
-					culling : [max: 7],
-					fit     : true,
-					format  : PLATFORM_getGraphDateFormat()
-//				format: PLATFORM_getGraphDateFormatFunction() // throws securityException when trying to escape javascript
-				]
-			],
-			y: [
-				label  : label,
-				padding: [
-					top: 50
-				]
-			]
-		]
-	]
-}
-
-private PLATFORM_getGraphDateFormat(dateType = selectedGraphPrecision()) {
-	// https://github.com/mbostock/d3/wiki/Time-Formatting
-	def graphDateFormat
-	switch (dateType) {
-		case "Live":
-			graphDateFormat = "%I:%M" // hour (12-hour clock) as a decimal number [00,12] // AM or PM
-			break
-		case "Hourly":
-			graphDateFormat = "%I %p" // hour (12-hour clock) as a decimal number [00,12] // AM or PM
-			break
-		case "Daily":
-			graphDateFormat = "%a" // abbreviated weekday name
-			break
-		case "Monthly":
-			graphDateFormat = "%b" // abbreviated month name
-			break
-		case "Annually":
-			graphDateFormat = "%y" // year without century as a decimal number [00,99]
-			break
-	}
-	graphDateFormat
-}
-
-private String PLATFORM_getGraphDateFormatFunction(dateType = selectedGraphPrecision()) {
-	def graphDateFunction = "function(date) { return date; }"
-	switch (dateType) {
-		case "Live":
-			graphDateFunction = """
-			function(date) {
-			 return.getMinutes();
-			}
-			"""
-			break;
-		case "Hourly":
-			graphDateFunction = """ function(date) {
-			  var hour = date.getHours();
-			  if (hour == 0) {
-			   return String(/12 am/).substring(1).slice(0,-1);
-			  } else if (hour > 12) {
-			   return hour -12 + String(/ pm/).substring(1).slice(0,-1);
-			  } else {
-			   return hour + String(/ am/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Daily":
-			graphDateFunction = """ function(date) {
-			  var day = date.getDay();
-			  switch(day) {
-			   case 0: return String(/Sun/).substring(1).slice(0,-1);
-			   case 1: return String(/Mon/).substring(1).slice(0,-1);
-			   case 2: return String(/Tue/).substring(1).slice(0,-1);
-			   case 3: return String(/Wed/).substring(1).slice(0,-1);
-			   case 4: return String(/Thu/).substring(1).slice(0,-1);
-			   case 5: return String(/Fri/).substring(1).slice(0,-1);
-			   case 6: return String(/Sat/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Monthly":
-			graphDateFunction = """ function(date) {
-			  var month = date.getMonth();
-			  switch(month) {
-			   case 0: return String(/Jan/).substring(1).slice(0,-1);
-			   case 1: return String(/Feb/).substring(1).slice(0,-1);
-			   case 2: return String(/Mar/).substring(1).slice(0,-1);
-			   case 3: return String(/Apr/).substring(1).slice(0,-1);
-			   case 4: return String(/May/).substring(1).slice(0,-1);
-			   case 5: return String(/Jun/).substring(1).slice(0,-1);
-			   case 6: return String(/Jul/).substring(1).slice(0,-1);
-			   case 7: return String(/Aug/).substring(1).slice(0,-1);
-			   case 8: return String(/Sep/).substring(1).slice(0,-1);
-			   case 9: return String(/Oct/).substring(1).slice(0,-1);
-			   case 10: return String(/Nov/).substring(1).slice(0,-1);
-			   case 11: return String(/Dec/).substring(1).slice(0,-1);
-			  }
-			 }"""
-			break
-		case "Annually":
-			graphDateFunction = """
-			function(date) {
-			 return.getFullYear();
-			}
-			"""
-			break
-	}
-	groovy.json.StringEscapeUtils.escapeJavaScript(graphDateFunction)
-}
-
-private jsEscapeString(str = "") {
-	"String(/${str}/).substring(1).slice(0,-1);"
-}
-
-private PLATFORM_fetchGraphData(attribute) {
-
-	log.debug "PLATFORM_fetchGraphData(${attribute})"
-
-	/*
-	[
-		[
-			dateString: "2014-12-1",
-			unixTime: 1421931600000,
-			min: 0,
-			max: 10,
-			average: 5
-		],
-		...
-	]
-	*/
-
-	def attributeBucket = state["measure.${attribute}"] ?: [:]
-	def dateType = selectedGraphPrecision()
-	attributeBucket[dateType]
-}
-
-// ========================================================
-// PLATFORM DATA STORAGE
-// ========================================================
-
-private PLATFORM_graphPrecisionOptions() { ["Live", "Hourly", "Daily", "Monthly", "Annually"] }
-
-private PLATFORM_storeData(attribute, value) {
-	PLATFORM_graphPrecisionOptions().each { dateType ->
-		PLATFORM_addDataToBucket(attribute, value, dateType)
-	}
-}
-
-/*
-[
-	Hourly: [
-		[
-			dateString: "2014-12-1",
-			unixTime: 1421931600000,
-			min: 0,
-			max: 10,
-			average: 5
-		],
-		...
-	],
-	...
-]
-*/
-
-private PLATFORM_addDataToBucket(attribute, value, dateType) {
-
-	def numberValue = value.toBigDecimal()
-
-	def attributeKey = "measure.${attribute}"
-	def attributeBucket = state[attributeKey] ?: [:]
-
-	def dateTypeBucket = attributeBucket[dateType] ?: []
-
-	def now = new Date()
-	def itemDateString = now.format("PLATFORM_get${dateType}Format"())
-	def item = dateTypeBucket.find { it.dateString == itemDateString }
-
-	if (!item) {
-		// no entry for this data point yet, fill with initial values
-		item = [:]
-		item.average = numberValue
-		item.runningSum = numberValue
-		item.runningCount = 1
-		item.min = numberValue
-		item.max = numberValue
-		item.unixTime = now.getTime()
-		item.dateString = itemDateString
-
-		// add the new data point
-		dateTypeBucket << item
-
-		// clear out old data points
-		def old = PLATFORM_getOldDateString(dateType)
-		if (old) { // annual data never gets cleared
-			dateTypeBucket.findAll { it.unixTime < old }.each { dateTypeBucket.remove(it) }
-		}
-
-		// limit the size of the bucket. Live data can stack up fast
-		def sizeLimit = 25
-		if (dateTypeBucket.size() > sizeLimit) {
-			dateTypeBucket = dateTypeBucket[-sizeLimit..-1]
-		}
-
-	} else {
-		//re-calculate average/min/max for this bucket
-		item.runningSum = (item.runningSum.toBigDecimal()) + numberValue
-		item.runningCount = item.runningCount.toInteger() + 1
-		item.average = item.runningSum.toBigDecimal() / item.runningCount.toInteger()
-
-		if (item.min == null) {
-			item.min = numberValue
-		} else if (numberValue < item.min.toBigDecimal()) {
-			item.min = numberValue
-		}
-		if (item.max == null) {
-			item.max = numberValue
-		} else if (numberValue > item.max.toBigDecimal()) {
-			item.max = numberValue
-		}
-	}
-
-	attributeBucket[dateType] = dateTypeBucket
-	state[attributeKey] = attributeBucket
-}
-
-private PLATFORM_getOldDateString(dateType) {
-	def now = new Date()
-	def date
-	switch (dateType) {
-		case "Live":
-			date = now.getTime() - 60 * 60 * 1000 // 1h * 60m * 60s * 1000ms // 1 hour
-			break
-		case "Hourly":
-			date = (now - 1).getTime()
-			break
-		case "Daily":
-			date = (now - 10).getTime()
-			break
-		case "Monthly":
-			date = (now - 30).getTime()
-			break
-		case "Annually":
-			break
-	}
-	date
-}
-
-private PLATFORM_getLiveFormat() { "HH:mm:ss" }
-
-private PLATFORM_getHourlyFormat() { "yyyy-MM-dd'T'HH" }
-
-private PLATFORM_getDailyFormat() { "yyyy-MM-dd" }
-
-private PLATFORM_getMonthlyFormat() { "yyyy-MM" }
-
-private PLATFORM_getAnnuallyFormat() { "yyyy" }
-
-// ========================================================
-// PLATFORM GRAPH DATA MIGRATION
-// ========================================================
-
-private PLATFORM_migrateGraphDataIfNeeded() {
-	if (!state.hasMigratedOldGraphData) {
-		def acceptableKeys = PLATFORM_graphPrecisionOptions()
-		def needsMigration = state.findAll { k, v -> v.keySet().findAll { !acceptableKeys.contains(it) } }.keySet()
-		needsMigration.each { PLATFORM_migrateGraphData(it) }
-		state.hasMigratedOldGraphData = true
-	}
-}
-
-private PLATFORM_migrateGraphData(attribute) {
-
-	log.trace "about to migrate ${attribute}"
-
-	def attributeBucket = state[attribute] ?: [:]
-	def migratedAttributeBucket = [:]
-
-	attributeBucket.findAll { k, v -> !PLATFORM_graphPrecisionOptions().contains(k) }.each { oldDateString, oldItem ->
-
-		def dateType = oldDateString.contains('T') ? "Hourly" : PLATFORM_graphPrecisionOptions().find {
-			"PLATFORM_get${it}Format"().size() == oldDateString.size()
-		}
-
-		def dateTypeFormat = "PLATFORM_get${dateType}Format"()
-
-		def newBucket = attributeBucket[dateType] ?: []
-/*
-		def existingNewItem = newBucket.find { it.dateString == oldDateString }
-		if (existingNewItem) {
-			newBucket.remove(existingNewItem)
-		}
-*/
-
-		def newItem = [
-			min         : oldItem.min,
-			max         : oldItem.max,
-			average     : oldItem.average,
-			runningSum  : oldItem.runningSum,
-			runningCount: oldItem.runningCount,
-			dateString  : oldDateString,
-			unixTime    : new Date().parse(dateTypeFormat, oldDateString).getTime()
-		]
-
-		newBucket << newItem
-		migratedAttributeBucket[dateType] = newBucket
-	}
-
-	state[attribute] = migratedAttributeBucket
+	renderGraph(attribute: params.attribute, xValues: xValues, yValues: yValues, focus: "Total", label: "Watts")
 }

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Presence", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Arrival Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Tone"
 		capability "Actuator"
 		capability "Signal Strength"
@@ -31,6 +31,15 @@ metadata {
 		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
 	}
 
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
+				])
+		}
+	}
+
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
 			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -0,0 +1,989 @@
+/**
+ *  Bose SoundTouch
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+// Needed to be able to serialize the XmlSlurper data back to XML
+import groovy.xml.XmlUtil
+
+// for the UI
+metadata {
+    definition (name: "Bose SoundTouch", namespace: "smartthings", author: "SmartThings") {
+        /**
+         * List our capabilties. Doing so adds predefined command(s) which
+         * belong to the capability.
+         */
+        capability "Switch"
+        capability "Refresh"
+        capability "Music Player"
+        capability "Polling"
+
+        /**
+         * Define all commands, ie, if you have a custom action not
+         * covered by a capability, you NEED to define it here or
+         * the call will not be made.
+         *
+         * To call a capability function, just prefix it with the name
+         * of the capability, for example, refresh would be "refresh.refresh"
+         */
+        command "preset1"
+        command "preset2"
+        command "preset3"
+        command "preset4"
+        command "preset5"
+        command "preset6"
+        command "aux"
+
+        command "everywhereJoin"
+        command "everywhereLeave"
+    }
+
+    /**
+     * Define the various tiles and the states that they can be in.
+     * The 2nd parameter defines an event which the tile listens to,
+     * if received, it tries to map it to a state.
+     *
+     * You can also use ${currentValue} for the value of the event
+     * or ${name} for the name of the event. Just make SURE to use
+     * single quotes, otherwise it will only be interpreted at time of
+     * launch, instead of every time the event triggers.
+     */
+    valueTile("nowplaying", "device.nowplaying", width: 2, height: 1, decoration:"flat") {
+        state "nowplaying", label:'${currentValue}', action:"refresh.refresh"
+    }
+
+    standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+    }
+    valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
+        state "station1", label:'${currentValue}', action:"preset1"
+    }
+    valueTile("2", "device.station2", decoration: "flat", canChangeIcon: false) {
+        state "station2", label:'${currentValue}', action:"preset2"
+    }
+    valueTile("3", "device.station3", decoration: "flat", canChangeIcon: false) {
+        state "station3", label:'${currentValue}', action:"preset3"
+    }
+    valueTile("4", "device.station4", decoration: "flat", canChangeIcon: false) {
+        state "station4", label:'${currentValue}', action:"preset4"
+    }
+    valueTile("5", "device.station5", decoration: "flat", canChangeIcon: false) {
+        state "station5", label:'${currentValue}', action:"preset5"
+    }
+    valueTile("6", "device.station6", decoration: "flat", canChangeIcon: false) {
+        state "station6", label:'${currentValue}', action:"preset6"
+    }
+    valueTile("aux", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'Auxillary\nInput', action:"aux"
+    }
+
+    standardTile("refresh", "device.nowplaying", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"refresh", icon:"st.secondary.refresh"
+    }
+
+    controlTile("volume", "device.volume", "slider", height:1, width:3, range:"(0..100)") {
+        state "volume", action:"music Player.setLevel"
+    }
+
+    standardTile("playpause", "device.playpause", decoration: "flat") {
+        state "pause", label:'', icon:'st.sonos.play-btn', action:'music Player.play'
+        state "play", label:'', icon:'st.sonos.pause-btn', action:'music Player.pause'
+    }
+
+    standardTile("prev", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"music Player.previousTrack", icon:"st.sonos.previous-btn"
+    }
+    standardTile("next", "device.switch", decoration: "flat", canChangeIcon: false) {
+        state "default", label:'', action:"music Player.nextTrack", icon:"st.sonos.next-btn"
+    }
+
+    valueTile("everywhere", "device.everywhere", width:2, height:1, decoration:"flat") {
+        state "join", label:"Join\nEverywhere", action:"everywhereJoin"
+        state "leave", label:"Leave\nEverywhere", action:"everywhereLeave"
+        // Final state is used if the device is in a state where joining is not possible
+        state "unavailable", label:"Not Available"
+    }
+
+    // Defines which tile to show in the overview
+    main "switch"
+
+    // Defines which tile(s) to show when user opens the detailed view
+    details ([
+        "nowplaying", "refresh",        // Row 1 (112)
+        "prev", "playpause", "next",    // Row 2 (123)
+        "volume",                       // Row 3 (111)
+        "1", "2", "3",                  // Row 4 (123)
+        "4", "5", "6",                  // Row 5 (123)
+        "aux", "everywhere"])           // Row 6 (122)
+}
+
+/**************************************************************************
+ * The following section simply maps the actions as defined in
+ * the metadata into onAction() calls.
+ *
+ * This is preferred since some actions can be dealt with more
+ * efficiently this way. Also keeps all user interaction code in
+ * one place.
+ *
+ */
+def off() { onAction("off") }
+def on() { onAction("on") }
+def volup() { onAction("volup") }
+def voldown() { onAction("voldown") }
+def preset1() { onAction("1") }
+def preset2() { onAction("2") }
+def preset3() { onAction("3") }
+def preset4() { onAction("4") }
+def preset5() { onAction("5") }
+def preset6() { onAction("6") }
+def aux() { onAction("aux") }
+def refresh() { onAction("refresh") }
+def setLevel(level) { onAction("volume", level) }
+def play() { onAction("play") }
+def pause() { onAction("pause") }
+def mute() { onAction("mute") }
+def unmute() { onAction("unmute") }
+def previousTrack() { onAction("previous") }
+def nextTrack() { onAction("next") }
+def everywhereJoin() { onAction("ejoin") }
+def everywhereLeave() { onAction("eleave") }
+/**************************************************************************/
+
+/**
+ * Main point of interaction with things.
+ * This function is called by SmartThings Cloud with the resulting data from
+ * any action (see HubAction()).
+ *
+ * Conversely, to execute any actions, you need to return them as a single
+ * item or a list (flattened).
+ *
+ * @param data Data provided by the cloud
+ * @return an action or a list() of actions. Can also return null if no further
+ *         action is desired at this point.
+ */
+def parse(String event) {
+    def data = parseLanMessage(event)
+    def actions = []
+
+    // List of permanent root node handlers
+    def handlers = [
+        "nowPlaying" : "boseParseNowPlaying",
+        "volume" : "boseParseVolume",
+        "presets" : "boseParsePresets",
+        "zone" : "boseParseEverywhere",
+    ]
+
+    // No need to deal with non-XML data
+    if (!data.headers || !data.headers?."content-type".contains("xml"))
+        return null
+
+    // Move any pending callbacks into ready state
+    prepareCallbacks()
+
+    def xml = new XmlSlurper().parseText(data.body)
+    // Let each parser take a stab at it
+    handlers.each { node,func ->
+        if (xml.name() == node)
+            actions << "$func"(xml)
+    }
+    // If we have callbacks waiting for this...
+    actions << processCallbacks(xml)
+
+    // Be nice and helpful
+    if (actions.size() == 0) {
+        log.warn "parse(): Unhandled data = " + lan
+        return null
+    }
+
+    // Issue new actions
+    return actions.flatten()
+}
+
+/**
+ * Called when the devicetype is first installed.
+ *
+ * @return action(s) to take or null
+ */
+def installed() {
+    onAction("refresh")
+}
+
+/**
+ * Responsible for dealing with user input and taking the
+ * appropiate action.
+ *
+ * @param user The user interaction
+ * @param data Additional data (optional)
+ * @return action(s) to take (or null if none)
+ */
+def onAction(String user, data=null) {
+    log.info "onAction(${user})"
+
+    // Keep IP address current (since device may have changed)
+    state.address = parent.resolveDNI2Address(device.deviceNetworkId)
+
+    // Process action
+    def actions = null
+    switch (user) {
+        case "on":
+            actions = boseSetPowerState(true)
+            break
+        case "off":
+            boseSetNowPlaying(null, "STANDBY")
+            actions = boseSetPowerState(false)
+            break
+        case "volume":
+            actions = boseSetVolume(data)
+            break
+        case "aux":
+            boseSetNowPlaying(null, "AUX")
+            boseZoneReset()
+            sendEvent(name:"everywhere", value:"unavailable")
+        case "1":
+        case "2":
+        case "3":
+        case "4":
+        case "5":
+        case "6":
+            actions = boseSetInput(user)
+            break
+        case "refresh":
+            boseSetNowPlaying(null, "REFRESH")
+            actions = [boseRefreshNowPlaying(), boseGetPresets(), boseGetVolume(), boseGetEverywhereState()]
+            break
+        case "play":
+            actions = [boseSetPlayMode(true), boseRefreshNowPlaying()]
+            break
+        case "pause":
+            actions = [boseSetPlayMode(false), boseRefreshNowPlaying()]
+            break
+        case "previous":
+            actions = [boseChangeTrack(-1), boseRefreshNowPlaying()]
+            break
+        case "next":
+            actions = [boseChangeTrack(1), boseRefreshNowPlaying()]
+            break
+        case "mute":
+            actions = boseSetMute(true)
+            break
+        case "unmute":
+            actions = boseSetMute(false)
+            break
+        case "ejoin":
+            actions = boseZoneJoin()
+            break
+        case "eleave":
+            actions = boseZoneLeave()
+            break
+        default:
+            log.error "Unhandled action: " + user
+    }
+
+    // Make sure we don't have nested lists
+    if (actions instanceof List)
+        return actions.flatten()
+    return actions
+}
+
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
+/**
+ * Joins this speaker into the everywhere zone
+ */
+def boseZoneJoin() {
+    def results = []
+    def posts = parent.boseZoneJoin(this)
+
+    for (post in posts) {
+        if (post['endpoint'])
+            results << bosePOST(post['endpoint'], post['body'], post['host'])
+    }
+    sendEvent(name:"everywhere", value:"leave")
+    results << boseRefreshNowPlaying()
+
+    return results
+}
+
+/**
+ * Removes this speaker from the everywhere zone
+ */
+def boseZoneLeave() {
+    def results = []
+    def posts = parent.boseZoneLeave(this)
+
+    for (post in posts) {
+        if (post['endpoint'])
+            results << bosePOST(post['endpoint'], post['body'], post['host'])
+    }
+    sendEvent(name:"everywhere", value:"join")
+    results << boseRefreshNowPlaying()
+
+    return results
+}
+
+/**
+ * Removes this speaker and any children WITHOUT
+ * signaling the speakers themselves. This is needed
+ * in certain cases where we know the user action will
+ * cause the zone to collapse (for example, AUX)
+ */
+def boseZoneReset() {
+    parent.boseZoneReset()
+}
+
+/**
+ * Handles <nowPlaying></nowPlaying> information and can also
+ * perform addtional actions if there is a pending command
+ * stored in the state variable. For example, the power is
+ * handled this way.
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParseNowPlaying(xmlData) {
+    def result = []
+
+    // Perform display update, allow it to add additional commands
+    if (boseSetNowPlaying(xmlData)) {
+        result << boseRefreshNowPlaying()
+    }
+
+    return result
+}
+
+/**
+ * Parses volume data
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParseVolume(xmlData) {
+    def result = []
+
+    sendEvent(name:"volume", value:xmlData.actualvolume.text())
+    sendEvent(name:"mute", value:(Boolean.toBoolean(xmlData.muteenabled.text()) ? "unmuted" : "muted"))
+
+    return result
+}
+
+/**
+ * Parses the result of the boseGetEverywhereState() call
+ *
+ * @param xmlData
+ */
+def boseParseEverywhere(xmlData) {
+    // No good way of detecting the correct state right now
+}
+
+/**
+ * Parses presets and updates the buttons
+ *
+ * @param xmlData Data to parse
+ * @return command
+ */
+def boseParsePresets(xmlData) {
+    def result = []
+
+    state.preset = [:]
+
+    def missing = ["1", "2", "3", "4", "5", "6"]
+    for (preset in xmlData.preset) {
+        def id = preset.attributes()['id']
+        def name = preset.ContentItem.itemName[0].text().replaceAll(~/ +/, "\n")
+        if (name == "##TRANS_SONGS##")
+            name = "Local\nPlaylist"
+        sendEvent(name:"station${id}", value:name)
+        missing = missing.findAll { it -> it != id }
+
+        // Store the presets into the state for recall later
+        state.preset["$id"] = XmlUtil.serialize(preset.ContentItem)
+    }
+
+    for (id in missing) {
+        state.preset["$id"] = null
+        sendEvent(name:"station${id}", value:"Preset $id\n\nNot set")
+    }
+
+    return result
+}
+
+/**
+ * Based on <nowPlaying></nowPlaying>, updates the visual
+ * representation of the speaker
+ *
+ * @param xmlData The nowPlaying info
+ * @param override Provide the source type manually (optional)
+ *
+ * @return true if it would prefer a refresh soon
+ */
+def boseSetNowPlaying(xmlData, override=null) {
+    def needrefresh = false
+    def nowplaying = null
+
+    if (xmlData && xmlData.playStatus) {
+        switch(xmlData.playStatus) {
+            case "BUFFERING_STATE":
+                nowplaying = "Please wait\nBuffering..."
+                needrefresh = true
+                break
+            case "PLAY_STATE":
+                sendEvent(name:"playpause", value:"play")
+                break
+            case "PAUSE_STATE":
+            case "STOP_STATE":
+                sendEvent(name:"playpause", value:"pause")
+                break
+        }
+    }
+
+    // If the previous section didn't handle this, take another stab at it
+    if (!nowplaying) {
+        nowplaying = ""
+        switch (override ? override : xmlData.attributes()['source']) {
+            case "AUX":
+                nowplaying = "Auxiliary Input"
+                break
+            case "AIRPLAY":
+                nowplaying = "Air Play"
+                break
+            case "STANDBY":
+                nowplaying = "Standby"
+                break
+            case "INTERNET_RADIO":
+                nowplaying = "${xmlData.stationName.text()}\n\n${xmlData.description.text()}"
+                break
+            case "REFRESH":
+                nowplaying = "Please wait"
+                break
+            case "SPOTIFY":
+            case "DEEZER":
+            case "PANDORA":
+            case "IHEART":
+                if (xmlData.ContentItem.itemName[0])
+                    nowplaying += "[${xmlData.ContentItem.itemName[0].text()}]\n\n"
+            case "STORED_MUSIC":
+                nowplaying += "${xmlData.track.text()}"
+                if (xmlData.artist)
+                    nowplaying += "\nby\n${xmlData.artist.text()}"
+                if (xmlData.album)
+                    nowplaying += "\n\n(${xmlData.album.text()})"
+                break
+            default:
+                if (xmlData != null)
+                    nowplaying = "${xmlData.ContentItem.itemName[0].text()}"
+                else
+                    nowplaying = "Unknown"
+        }
+    }
+
+    // Some last parsing which only deals with actual data from device
+    if (xmlData) {
+        if (xmlData.attributes()['source'] == "STANDBY") {
+            log.trace "nowPlaying reports standby: " + XmlUtil.serialize(xmlData)
+            sendEvent(name:"switch", value:"off")
+        } else {
+            sendEvent(name:"switch", value:"on")
+        }
+        boseSetPlayerAttributes(xmlData)
+    }
+
+    // Do not allow a standby device or AUX to be master
+    if (!parent.boseZoneHasMaster() && (override ? override : xmlData.attributes()['source']) == "STANDBY")
+        sendEvent(name:"everywhere", value:"unavailable")
+    else if ((override ? override : xmlData.attributes()['source']) == "AUX")
+        sendEvent(name:"everywhere", value:"unavailable")
+    else if (boseGetZone()) {
+        log.info "We're in the zone: " + boseGetZone()
+        sendEvent(name:"everywhere", value:"leave")
+    } else
+        sendEvent(name:"everywhere", value:"join")
+
+    sendEvent(name:"nowplaying", value:nowplaying)
+
+    return needrefresh
+}
+
+/**
+ * Updates the attributes exposed by the music Player capability
+ *
+ * @param xmlData The NowPlaying XML data
+ */
+def boseSetPlayerAttributes(xmlData) {
+    // Refresh attributes
+    def trackText = ""
+    def trackDesc = ""
+    def trackData = [:]
+
+    switch (xmlData.attributes()['source']) {
+        case "STANDBY":
+            trackData["station"] = trackText = trackDesc = "Standby"
+            break
+        case "AUX":
+            trackData["station"] = trackText = trackDesc = "Auxiliary Input"
+            break
+        case "AIRPLAY":
+            trackData["station"] = trackText = trackDesc = "Air Play"
+            break
+        case "SPOTIFY":
+        case "DEEZER":
+        case "PANDORA":
+        case "IHEART":
+        case "STORED_MUSIC":
+            trackText = trackDesc = "${xmlData.track.text()}"
+            trackData["name"] = xmlData.track.text()
+            if (xmlData.artist) {
+                trackText += " by ${xmlData.artist.text()}"
+                trackDesc += " - ${xmlData.artist.text()}"
+                trackData["artist"] = xmlData.artist.text()
+            }
+            if (xmlData.album) {
+                trackText += " (${xmlData.album.text()})"
+                trackData["album"] = xmlData.album.text()
+            }
+            break
+        case "INTERNET_RADIO":
+            trackDesc = xmlData.stationName.text()
+            trackText = xmlData.stationName.text() + ": " + xmlData.description.text()
+            trackData["station"] = xmlData.stationName.text()
+            break
+        default:
+            trackText = trackDesc = xmlData.ContentItem.itemName[0].text()
+    }
+
+    sendEvent(name:"trackDescription", value:trackDesc, descriptionText:trackText)
+}
+
+/**
+ * Queries the state of the "play everywhere" mode
+ *
+ * @return command
+ */
+def boseGetEverywhereState() {
+    return boseGET("/getZone")
+}
+
+/**
+ * Generates a remote key event
+ *
+ * @param key The name of the key
+ *
+ * @return command
+ *
+ * @note It's VITAL that it's done as two requests, or it will ignore the
+ *       the second key info.
+ */
+def boseKeypress(key) {
+    def press = "<key state=\"press\" sender=\"Gabbo\">${key}</key>"
+    def release = "<key state=\"release\" sender=\"Gabbo\">${key}</key>"
+
+    return [bosePOST("/key", press), bosePOST("/key", release)]
+}
+
+/**
+ * Pauses or plays current preset
+ *
+ * @param play If true, plays, else it pauses (depending on preset, may stop)
+ *
+ * @return command
+ */
+def boseSetPlayMode(boolean play) {
+    log.trace "Sending " + (play ? "PLAY" : "PAUSE")
+    return boseKeypress(play ? "PLAY" : "PAUSE")
+}
+
+/**
+ * Sets the volume in a deterministic way.
+ *
+ * @param New volume level, ranging from 0 to 100
+ *
+ * @return command
+ */
+def boseSetVolume(int level) {
+    def result = []
+    int vol = Math.min(100, Math.max(level, 0))
+
+    sendEvent(name:"volume", value:"${vol}")
+
+    return [bosePOST("/volume", "<volume>${vol}</volume>"), boseGetVolume()]
+}
+
+/**
+ * Sets the mute state, unfortunately, for now, we need to query current
+ * state before taking action (no discrete mute/unmute)
+ *
+ * @param mute If true, mutes the system
+ * @return command
+ */
+def boseSetMute(boolean mute) {
+    queueCallback('volume', 'cb_boseSetMute', mute ? 'MUTE' : 'UNMUTE')
+    return boseGetVolume()
+}
+
+/**
+ * Callback for boseSetMute(), checks current state and changes it
+ * if it doesn't match the requested state.
+ *
+ * @param xml The volume XML data
+ * @param mute The new state of mute
+ *
+ * @return command
+ */
+def cb_boseSetMute(xml, mute) {
+    def result = []
+    if ((xml.muteenabled.text() == 'false' && mute == 'MUTE') ||
+        (xml.muteenabled.text() == 'true' && mute == 'UNMUTE'))
+    {
+        result << boseKeypress("MUTE")
+    }
+    log.trace("muteunmute: " + ((mute == "MUTE") ? "unmute" : "mute"))
+    sendEvent(name:"muteunmute", value:((mute == "MUTE") ? "unmute" : "mute"))
+    return result
+}
+
+/**
+ * Refreshes the state of the volume
+ *
+ * @return command
+ */
+def boseGetVolume() {
+    return boseGET("/volume")
+}
+
+/**
+ * Changes the track to either the previous or next
+ *
+ * @param direction > 0 = next track, < 0 = previous track, 0 = no action
+ * @return command
+ */
+def boseChangeTrack(int direction) {
+    if (direction < 0) {
+        return boseKeypress("PREV_TRACK")
+    } else if (direction > 0) {
+        return boseKeypress("NEXT_TRACK")
+    }
+    return []
+}
+
+/**
+ * Sets the input to preset 1-6 or AUX
+ *
+ * @param input The input (one of 1,2,3,4,5,6,aux)
+ *
+ * @return command
+ *
+ * @note If no presets have been loaded, it will first refresh the presets.
+ */
+def boseSetInput(input) {
+    log.info "boseSetInput(${input})"
+    def result = []
+
+    if (!state.preset) {
+        result << boseGetPresets()
+        queueCallback('presets', 'cb_boseSetInput', input)
+    } else {
+        result << cb_boseSetInput(null, input)
+    }
+    return result
+}
+
+/**
+ * Callback used by boseSetInput(), either called directly by
+ * boseSetInput() if we already have presets, or called after
+ * retreiving the presets for the first time.
+ *
+ * @param xml The presets XML data
+ * @param input Desired input
+ *
+ * @return command
+ *
+ * @note Uses KEY commands for AUX, otherwise /select endpoint.
+ *       Reason for this is latency. Since keypresses are done
+ *       in pairs (press + release), you could accidentally change
+ *       the preset if there is a long delay between the two.
+ */
+def cb_boseSetInput(xml, input) {
+    def result = []
+
+    if (input >= "1" && input <= "6" && state.preset["$input"])
+        result << bosePOST("/select", state.preset["$input"])
+    else if (input.toLowerCase() == "aux") {
+        result << boseKeypress("AUX_INPUT")
+    }
+
+    // Horrible workaround... but we need to delay
+    // the update by at least a few seconds...
+    result << boseRefreshNowPlaying(3000)
+    return result
+}
+
+/**
+ * Sets the power state of the bose unit
+ *
+ * @param device The device in-question
+ * @param enable True to power on, false to power off
+ *
+ * @return command
+ *
+ * @note Will first query state before acting since there
+ *       is no discreete call.
+ */
+def boseSetPowerState(boolean enable) {
+    log.info "boseSetPowerState(${enable})"
+    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
+    return boseRefreshNowPlaying()
+}
+
+/**
+ * Callback function used by boseSetPowerState(), is used
+ * to handle the fact that we only have a toggle for power.
+ *
+ * @param xml The XML data from nowPlaying
+ * @param state The requested state
+ *
+ * @return command
+ */
+def cb_boseSetPowerState(xml, state) {
+    def result = []
+    if ( (xml.attributes()['source'] == "STANDBY" && state == "POWERON") ||
+         (xml.attributes()['source'] != "STANDBY" && state == "POWEROFF") )
+    {
+        result << boseKeypress("POWER")
+        if (state == "POWERON") {
+            result << boseRefreshNowPlaying()
+            queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+        }
+    }
+    return result.flatten()
+}
+
+/**
+ * We're sometimes too quick on the draw and get a refreshed nowPlaying
+ * which shows standby (essentially, the device has yet to completely
+ * transition to awake state), so we need to poll a few times extra
+ * to make sure we get it right.
+ *
+ * @param xml The XML data from nowPlaying
+ * @param tries A counter which will decrease, once it reaches zero,
+ *              we give up and assume that whatever we got was correct.
+ * @return command
+ */
+def cb_boseConfirmPowerOn(xml, tries) {
+    def result = []
+    log.warn "boseConfirmPowerOn() attempt #" + tries
+    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+        result << boseRefreshNowPlaying()
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+    }
+    return result
+}
+
+/**
+ * Requests an update on currently playing item(s)
+ *
+ * @param delay If set to non-zero, delays x ms before issuing
+ *
+ * @return command
+ */
+def boseRefreshNowPlaying(delay=0) {
+    if (delay > 0) {
+        return ["delay ${delay}", boseGET("/now_playing")]
+    }
+    return boseGET("/now_playing")
+}
+
+/**
+ * Requests the list of presets
+ *
+ * @return command
+ */
+def boseGetPresets() {
+    return boseGET("/presets")
+}
+
+/**
+ * Utility function, makes GET requests to BOSE device
+ *
+ * @param path What endpoint
+ *
+ * @return command
+ */
+def boseGET(String path) {
+    new physicalgraph.device.HubAction([
+        method: "GET",
+        path: path,
+        headers: [
+            HOST: state.address + ":8090",
+        ]])
+}
+
+/**
+ * Utility function, makes a POST request to the BOSE device with
+ * the provided data.
+ *
+ * @param path What endpoint
+ * @param data What data
+ * @param address Specific ip and port (optional)
+ *
+ * @return command
+ */
+def bosePOST(String path, String data, String address=null) {
+    new physicalgraph.device.HubAction([
+        method: "POST",
+        path: path,
+        body: data,
+        headers: [
+            HOST: address ?: (state.address + ":8090"),
+        ]])
+}
+
+/**
+ * Queues a callback function for when a specific XML root is received
+ * Will execute on subsequent parse() call(s), never on the current
+ * parse() call.
+ *
+ * @param root The root node that this callback should react to
+ * @param func Name of the function
+ * @param param Parameters for function (optional)
+ */
+def queueCallback(String root, String func, param=null) {
+    if (!state.pending)
+        state.pending = [:]
+    if (!state.pending[root])
+        state.pending[root] = []
+    state.pending[root] << ["$func":"$param"]
+}
+
+/**
+ * Transfers the pending callbacks into readiness state
+ * so they can be executed by processCallbacks()
+ *
+ * This is needed to avoid reacting to queueCallbacks() within
+ * the same loop.
+ */
+def prepareCallbacks() {
+    if (!state.pending)
+        return
+    if (!state.ready)
+        state.ready = [:]
+    state.ready << state.pending
+    state.pending = [:]
+}
+
+/**
+ * Executes any ready callback for a specific root node
+ * with associated parameter and then clears that entry.
+ *
+ * If a callback returns data, it's added to a list of
+ * commands which is returned to the caller of this function
+ *
+ * Once a callback has been used, it's removed from the list
+ * of queued callbacks (ie, it executes only once!)
+ *
+ * @param xml The XML data to be examined and delegated
+ * @return list of commands
+ */
+def processCallbacks(xml) {
+    def result = []
+
+    if (!state.ready)
+        return result
+
+    if (state.ready[xml.name()]) {
+        state.ready[xml.name()].each { callback ->
+            callback.each { func, param ->
+                if (func != "func") {
+                    if (param)
+                    result << "$func"(xml, param)
+                    else
+                        result << "$func"(xml)
+                }
+            }
+        }
+        state.ready.remove(xml.name())
+    }
+    return result.flatten()
+}
+
+/**
+ * State managament for the Play Everywhere zone.
+ * This is typically called from the parent.
+ *
+ * A device is either:
+ *
+ * null = Not participating
+ * server = running the show
+ * client = under the control of the server
+ *
+ * @param newstate (see above for types)
+ */
+def boseSetZone(String newstate) {
+    log.debug "boseSetZone($newstate)"
+    state.zone = newstate
+
+    // Refresh our state
+    if (newstate) {
+        sendEvent(name:"everywhere", value:"leave")
+    } else {
+        sendEvent(name:"everywhere", value:"join")
+    }
+}
+
+/**
+ * Used by the Everywhere zone, returns the current state
+ * of zone membership (null, server, client)
+ * This is typically called from the parent.
+ *
+ * @return state
+ */
+def boseGetZone() {
+    return state.zone
+}
+
+/**
+ * Sets the DeviceID of this particular device.
+ *
+ * Needs to be done this way since DNI is not always
+ * the same as DeviceID which is used internally by
+ * BOSE.
+ *
+ * @param devID The DeviceID
+ */
+def boseSetDeviceID(String devID) {
+    state.deviceID = devID
+}
+
+/**
+ * Retrieves the DeviceID for this device
+ *
+ * @return deviceID
+ */
+def boseGetDeviceID() {
+    return state.deviceID
+}
+
+/**
+ * Returns the IP of this device
+ *
+ * @return IP address
+ */
+def getDeviceIP() {
+    return parent.resolveDNI2Address(device.deviceNetworkId)
+}

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -40,7 +40,7 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -153,31 +153,37 @@ def refresh()
 //}
 
 def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16) / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+	if (value != null) {
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
 	}
 }
 
 def setHeatingSetpoint(degrees) {
-	def temperatureScale = getTemperatureScale()
-	
-	def degreesInteger = degrees as Integer
-	log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
-	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
-	
-	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
-	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+
+		def degreesInteger = Math.round(degrees)
+		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
+	}
 }
 
 def setCoolingSetpoint(degrees) {
-	def degreesInteger = degrees as Integer
-	log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
-	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
-	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
-	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
 }
 
 def modes() {

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -143,8 +143,7 @@ def setLevel(value) {
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [	
   
         //Switch Reporting

devicetypes/smartthings/enerwave-zw15sm-metering-switch.src/enerwave-zw15sm-metering-switch.groovy

@@ -0,0 +1,249 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ * modified by lgkahn v1 for control of the on/off light
+ * the lite when on/off is not the normal parameter settings of the config class and there also
+ * is no never lite option.. So custom code for this device only.
+ *
+ */
+metadata {
+	definition (name: "Enerwave ZW15SM Metering Switch", namespace: "smartthings", author: "LGKahn") {
+		capability "Energy Meter"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Polling"
+		capability "Refresh"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Indicator"
+        
+      
+        
+		fingerprint inClusters: "0x25,0x32"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		for (int i = 0; i <= 10000; i += 1000) {
+			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 10) {
+			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
+		}
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+
+	}
+
+	// tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+		valueTile("power", "device.power") {
+			state "default", label:'${currentValue} W'
+		}
+		valueTile("energy", "device.energy") {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		standardTile("indicatorStatus", "device.indicatorStatus", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
+			state "when on", action:"indicator.indicatorWhenOff", icon:"st.indicators.lit-when-on"
+		
+		}
+		main(["switch","power","energy"])
+		details(["switch","power","energy","indicatorStatus","refresh","reset"])
+	}
+}
+
+def updated() {
+	try {
+		if (!state.MSR) {
+			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
+		}
+	} catch (e) { log.debug e }
+}
+
+def parse(String description) {
+	def result = null
+    //log.debug "in parse desc = $description"
+    
+	if(description == "updated") return 
+	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+	return result
+}
+
+
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+	} else if (cmd.scale == 1) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
+	} else if (cmd.scale == 2) {
+		createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	def evt = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "physical")
+	if (evt.isStateChange) {
+		[evt, response(["delay 3000", zwave.meterV2.meterGet(scale: 2).format()])]
+	} else {
+		evt
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+
+   // log.debug "in config report  got indicatorstatus = $state.currentIndicatorStatus"	
+	[name: "indicatorStatus", value: state.currentIndicatorStatus, display: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	// retypeBasedOnMSR()
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr.startsWith("0086") && !state.aeonconfig) {  // Aeon Labs meter
+		state.aeonconfig = 1
+		result << response(delayBetween([
+			zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // report power in watts
+			zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // report energy in kWh
+			zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
+			//zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	} else {
+		result << response(delayBetween([
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "$device.displayName: Unhandled: $cmd"
+	[:]
+}
+
+def on() {
+
+log.debug "in on"
+	[
+    
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def off() {
+log.debug "in off"
+	[
+    	zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def refresh() {
+	def value = "when off"
+   
+    log.debug "in refresh for whenon got indicatorstatus = $state.currentIndicatorStatus"
+    sendEvent(name: "indicatorStatus", value: state.currentIndicatorStatus, display: true)
+	
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def configure() {
+	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+}
+
+def reset() {
+			 state.currentIndicatorStatus = "when on"
+	return [
+		zwave.meterV2.meterReset().format(),
+		zwave.meterV2.meterGet(scale: 0).format()
+	]
+}
+
+
+
+
+def indicatorWhenOn() {
+log.debug "in when on"
+ state.currentIndicatorStatus = "when on"
+	sendEvent(name: "indicatorStatus", value: "when on", display: true)
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 1).format()
+	}
+
+def indicatorWhenOff() {
+log.debug "in when off"
+ state.currentIndicatorStatus = "when off"
+	sendEvent(name: "indicatorStatus", value: "when off", display: true)	  
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 0).format()
+	}
+
+
+

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -0,0 +1,887 @@
+/**
+ *	Fidure Thermostat, Based on ZigBee thermostat (SmartThings)
+ *
+ *	Author: Fidure
+ *	Date: 2014-12-13
+ *  Updated: 2015-08-26
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Fidure Thermostat", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Polling"
+
+		attribute "displayTemperature","number"
+		attribute "displaySetpoint", "string"
+		command 	"raiseSetpoint"
+		command 	"lowerSetpoint"
+		attribute "upButtonState", "string"
+		attribute "downButtonState", "string"
+
+		attribute "runningMode", "string"
+    	attribute "lockLevel", "string"
+
+		command "setThermostatTime"
+  		command "lock"
+
+ 		attribute "prorgammingOperation", "number"
+  		attribute "prorgammingOperationDisplay", "string"
+  		command   "Program"
+
+  		attribute "setpointHold", "string"
+		attribute "setpointHoldDisplay", "string"
+		command "Hold"
+  		attribute "holdExpiary", "string"
+
+		attribute "lastTimeSync", "string"
+
+		attribute "thermostatOperatingState", "string"
+
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0201,0204,0B05", outClusters: "000A, 0019"
+
+	}
+
+	// simulator metadata
+	simulator { }
+  // pref
+     preferences {
+
+		input ("hold_time", "enum", title: "Default Hold Time in Hours",
+        description: "Default Hold Duration in hours",
+        range: "1..24", options: ["No Hold", "2 Hours", "4 Hours", "8 Hours", "12 Hours", "1 Day"],
+        displayDuringSetup: false)
+        input ("sync_clock", "boolean", title: "Synchronize Thermostat Clock Automatically?", options: ["Yes","No"])
+        input ("lock_level", "enum", title: "Thermostat Screen Lock Level", options: ["Full","Mode Only", "Setpoint"])
+ 	}
+
+	tiles {
+		valueTile("temperature", "displayTemperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+        [value: 0, color: "#153591"],
+				[value: 7, color: "#1e9cbb"],
+				[value: 15, color: "#90d2a7"],
+				[value: 23, color: "#44b621"],
+				[value: 29, color: "#f1d801"],
+				[value: 35, color: "#d04e00"],
+				[value: 36, color: "#bc2323"],
+									// fahrenheit range
+				[value: 37, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+        ]
+			)
+		}
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+			state "off",   action:"thermostat.setThermostatMode", icon:"st.thermostat.heating-cooling-off"
+			state "cool",  action:"thermostat.setThermostatMode", icon:"st.thermostat.cool"
+			state "heat",  action:"thermostat.setThermostatMode", icon:"st.thermostat.heat"
+			state "auto",  action:"thermostat.setThermostatMode", icon:"st.thermostat.auto"
+		}
+
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.setThermostatFanMode"
+			state "fanOn", label:'${name}', action:"thermostat.setThermostatFanMode"
+		}
+
+    standardTile("hvacStatus", "thermostatOperatingState", inactiveLabel: false, decoration: "flat") {
+				state "Resting",  label: 'Resting'
+				state "Heating",  icon:"st.thermostat.heating"
+				state "Cooling",  icon:"st.thermostat.cooling"
+		}
+
+
+    standardTile("lock", "lockLevel", inactiveLabel: false, decoration: "flat") {
+        state "Unlocked",   action:"lock", label:'${name}'
+        state "Mode Only",  action:"lock", label:'${name}'
+        state "Setpoint",   action:"lock", label:'${name}'
+        state "Full",  action:"lock", label:'${name}'
+    }
+
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false, range: "$min..$max") {
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue}° heat', unit:"F", backgroundColor:"#ffffff"
+		}
+		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false, range: "$min..$max") {
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#1e9cbb"
+		}
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue}° cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("refresh", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+        valueTile("scheduleText", "prorgammingOperation", inactiveLabel: false, decoration: "flat", width: 2) {
+        	state "default", label: 'Schedule'
+    	}
+    	valueTile("schedule", "prorgammingOperationDisplay", inactiveLabel: false, decoration: "flat") {
+        	state "default", action:"Program", label: '${currentValue}'
+    	}
+
+    	valueTile("hold", "setpointHoldDisplay", inactiveLabel: false, decoration: "flat", width: 3) {
+            state "setpointHold", action:"Hold", label: '${currentValue}'
+		}
+
+		valueTile("setpoint", "displaySetpoint", width: 2, height: 2)
+		{
+			state("displaySetpoint", label: '${currentValue}°',
+				backgroundColor: "#919191")
+		}
+
+		standardTile("upButton", "upButtonState", decoration: "flat", inactiveLabel: false) {
+			state "normal", action:"raiseSetpoint", backgroundColor:"#919191", icon:"st.thermostat.thermostat-up"
+			state "pressed", action:"raiseSetpoint", backgroundColor:"#ff0000", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("downButton", "downButtonState", decoration: "flat", inactiveLabel: false) {
+			state "normal", action:"lowerSetpoint", backgroundColor:"#919191", icon:"st.thermostat.thermostat-down"
+			state "pressed", action:"lowerSetpoint", backgroundColor:"#ff9191", icon:"st.thermostat.thermostat-down"
+		}
+
+
+		main "temperature"
+		details([ "temperature", "mode", "hvacStatus","setpoint","upButton","downButton","scheduleText", "schedule", "hold",
+        "heatSliderControl", "heatingSetpoint","coolSliderControl", "coolingSetpoint", "lock", "refresh", "configure"])
+	}
+}
+
+def getMin() {
+	try
+	{
+	if (getTemperatureScale() == "C")
+	 	return 10
+	else
+		return 50
+	} catch (all)
+	{
+		return 10
+	}
+}
+
+def getMax() {
+	try {
+		if (getTemperatureScale() == "C")
+		return 30
+	else
+		return 86
+	} catch (all)
+	{
+		return 86
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def result = []
+
+	if (description?.startsWith("read attr -")) {
+
+		//TODO: Parse RAW strings for multiple attributes
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		for ( atMap in descMap.attrs)
+		{
+			def map = [:]
+
+		  if (descMap.cluster == "0201")
+			{
+				//log.trace "attribute: ${atMap.attrId} "
+                switch(atMap.attrId.toLowerCase())
+				{
+	            case "0000":
+	  						map.name = "temperature"
+	  						map.value = getTemperature(atMap.value)
+								result += createEvent("name":"displayTemperature", "value": getDisplayTemperature(atMap.value))
+	  					break;
+	            case "0005":
+	            //log.debug "hex time: ${descMap.value}"
+	            	if (atMap.encoding ==  "23")
+	                {
+	            	    	map.name = "holdExpiary"
+	                  	map.value = "${convertToTime(atMap.value).getTime()}"
+	                    //log.trace "HOLD EXPIRY: ${atMap.value} is ${map.value}"
+	                    updateHoldLabel("HoldExp", "${map.value}")
+	  				}
+	            break;
+	  				  case "0011":
+	  						map.name = "coolingSetpoint"
+	  						map.value = getDisplayTemperature(atMap.value)
+								updateSetpoint(map.name,map.value)
+	  					break;
+	  					case "0012":
+	  						map.name = "heatingSetpoint"
+	  						map.value = getDisplayTemperature(atMap.value)
+								updateSetpoint(map.name,map.value)
+	  					break;
+	  					case "001c":
+                        	map.name = "thermostatMode"
+	  						map.value = getModeMap()[atMap.value]
+							updateSetpoint(map.name,map.value)
+	  					break;
+							case "001e":   //running mode enum8
+			          			map.name = "runningMode"
+								map.value = getModeMap()[atMap.value]
+								updateSetpoint(map.name,map.value)
+							break;
+	            case "0023":   // setpoint hold enum8
+	            map.name = "setpointHold"
+	            map.value = getHoldMap()[atMap.value]
+	            updateHoldLabel("Hold", map.value)
+	            break;
+	            case "0024":   // hold duration int16u
+	            map.name = "setpointHoldDuration"
+	            map.value = Integer.parseInt("${atMap.value}", 16)
+
+	            break;
+	            case "0025":   // thermostat programming operation bitmap8
+	  					map.name = "prorgammingOperation"
+	                      def val = getProgrammingMap()[Integer.parseInt("${atMap.value}", 16) & 0x01]
+	  					result += createEvent("name":"prorgammingOperationDisplay", "value": val)
+	            map.value = atMap.value
+	  					break;
+	            case "0029":
+								// relay state
+	              map.name = "thermostatOperatingState"
+	              map.value = getThermostatOperatingState(atMap.value)
+	            break;
+	      }
+	    } else if (descMap.cluster == "0204")
+	    {
+	      if (atMap.attrId == "0001")
+	      {
+	  			map.name = "lockLevel"
+                map.value = getLockMap()[atMap.value]
+	      }
+	    }
+
+		 if (map) {
+            result += createEvent(map)
+ 	 	 }
+	  }
+  }
+
+	log.debug "Parse returned $result"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+  def map = (description - "read attr - ").split(",").inject([:]) { map, param ->
+  def nameAndValue = param.split(":")
+  map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+  }
+
+    def attrId = map.get('attrId')
+    def encoding = map.get('encoding')
+    def value = map.get('value')
+    def result = map.get('result')
+    def list = [];
+
+  if (getDataLengthByType(map.get('encoding')) < map.get('value').length()) {
+    def raw = map.get('raw')
+
+    def size = Long.parseLong(''+ map.get('size'), 16)
+    def index = 12;
+    def len
+	
+    //log.trace "processing multi attributes"
+    while((index-12) < size) {
+       attrId = flipHexStringEndianness(raw[index..(index+3)])
+       index+= 4;
+       if (result == "success")
+       index+=2;
+       encoding = raw[index..(index+1)]
+       index+= 2;
+       len =getDataLengthByType(encoding)
+       value = flipHexStringEndianness(raw[index..(index+len-1)])
+       index+=len;
+       list += ['attrId': "$attrId", 'encoding':"$encoding", 'value': "$value"]
+    }
+  }
+  else 
+    list += ['attrId': "$attrId", 'encoding': "$encoding", 'value': "$value"]
+  
+  map.remove('value')
+  map.remove('encoding')
+  map.remove('attrId')
+  map += ['attrs' : list ]
+}
+
+def flipHexStringEndianness(s)
+{
+  s = s.reverse()
+  def sb = new StringBuilder()
+  for (int i=0; i < s.length() -1; i+=2)
+   sb.append(s.charAt(i+1)).append(s.charAt(i))
+  sb
+}
+
+def getDataLengthByType(t)
+{
+	// number of bytes in each static data type
+	 def map = ["08":1,	"09":2,	"0a":3,	"0b":4,	"0c":5,	"0d":6,	"0e":7,	"0f":8,	"10":1,	"18":1,	"19":2,	"1a":3,	"1b":4,
+	 "1c":5,"1d":6,	"1e":7,	"1f":8,	"20":1,	"21":2,	"22":3,	"23":4,	"24":5,	"25":6,	"26":7,	"27":8,	"28":1,	"29":2,
+	 "2a":3,	"2b":4,	"2c":5,	"2d":6,	"2e":7,	"2f":8,	"30":1,	"31":2,	"38":2,	"39":4,	"40":8,	"e0":4,	"e1":4,	"e2":4,
+	 "e8":2,	"e9":2,	"ea":4,	"f0":8,	"f1":16]
+
+	// return number of hex chars
+	 return map.get(t) * 2
+}
+
+
+def getProgrammingMap() { [
+	0:"Off",
+	1:"On"
+]}
+
+def getModeMap() { [
+	"00":"off",
+	"01":"auto",
+	"03":"cool",
+	"04":"heat"
+]}
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+def getHoldMap()
+{[
+	"00":"Off",
+	"01":"On"
+]}
+
+
+def updateSetpoint(attrib, val)
+{
+	def cool = device.currentState("coolingSetpoint")?.value
+	def heat = device.currentState("heatingSetpoint")?.value
+	def runningMode = device.currentState("runningMode")?.value
+	def mode = device.currentState("thermostatMode")?.value
+
+	def value = '--';
+
+
+	if ("heat"  == mode && heat != null)
+		value = heat;
+	else if ("cool"  == mode && cool != null)
+		value = cool;
+    else if ("auto" == mode && runningMode == "cool" && cool != null)
+    	value = cool;
+    else if ("auto" == mode && runningMode == "heat" && heat != null)
+    	value = heat;
+
+	sendEvent("name":"displaySetpoint", "value": value)
+}
+
+def raiseSetpoint()
+{
+	sendEvent("name":"upButtonState", "value": "pressed")
+	sendEvent("name":"upButtonState", "value": "normal")
+	adjustSetpoint(5)
+}
+
+def lowerSetpoint()
+{
+	sendEvent("name":"downButtonState", "value": "pressed")
+	sendEvent("name":"downButtonState", "value": "normal")
+	adjustSetpoint(-5)
+}
+
+def adjustSetpoint(value)
+{
+	def runningMode = device.currentState("runningMode")?.value
+	def mode = device.currentState("thermostatMode")?.value
+
+		//default to both heat and cool
+    def modeData = 0x02
+
+    if ("heat" == mode || "heat" == runningMode)
+    		modeData = "00"
+    else if ("cool" == mode || "cool" == runningMode)
+    	modeData = "01"
+
+    def amountData = String.format("%02X", value)[-2..-1]
+
+
+	"st cmd 0x${device.deviceNetworkId} 1 0x201 0 {" + modeData + " " + amountData + "}"
+
+}
+
+
+def getDisplayTemperature(value)
+{
+	def t = Integer.parseInt("$value", 16);
+
+
+	if (getTemperatureScale() == "C") {
+		t = (((t + 4) / 10) as Integer) / 10;
+	} else {
+		t = ((10 *celsiusToFahrenheit(t/100)) as Integer)/ 10;
+	}
+
+
+	return t;
+}
+
+def updateHoldLabel(attr, value)
+{
+	def currentHold = (device?.currentState("setpointHold")?.value)?: "..."
+
+    def holdExp = device?.currentState("holdExpiary")?.value
+		holdExp = holdExp?: "${(new Date()).getTime()}"
+
+	if ("Hold" == attr)
+    {
+    	currentHold = value
+    }
+
+	    if ("HoldExp" == attr)
+		{
+			holdExp = value
+		}
+		boolean past = ( (new Date(holdExp.toLong()).getTime())  < (new Date().getTime()))
+
+		if ("HoldExp" == attr)
+		{
+  			if (!past)
+				currentHold = "On"
+            else
+				currentHold = "Off"
+    }
+
+	def holdString = (currentHold == "On")?
+			( (past)? "Is On" : "Ends ${compareWithNow(holdExp.toLong())}") :
+			((currentHold == "Off")? " is Off" : " ...")
+
+    sendEvent("name":"setpointHoldDisplay", "value": "Hold ${holdString}")
+}
+
+def getSetPointHoldDuration()
+{
+	def holdTime = 0
+
+    if (settings.hold_time?.contains("Hours"))
+    {
+    	holdTime = Integer.parseInt(settings.hold_time[0..1].trim())
+    }
+    else if (settings.hold_time?.contains("Day"))
+    {
+    	holdTime = Integer.parseInt(settings.hold_time[0..1].trim()) * 24
+    }
+
+    def currentHoldDuration = device.currentState("setpointHoldDuration")?.value
+
+
+    if (Short.parseShort('0'+ (currentHoldDuration?: 0)) != (holdTime * 60))
+    {
+    	[
+        	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x24 0x21 {" +
+            String.format("%04X", ((holdTime * 60) as Short))  // switch to zigbee endian
+
+            + "}", "delay 100",
+			"st rattr 0x${device.deviceNetworkId} 1 0x201 0x24", "delay 200",
+		]
+
+    } else
+    {
+    	[]
+    }
+
+}
+
+def Hold()
+{
+	def currentHold = device.currentState("setpointHold")?.value
+
+	def next = (currentHold == "On") ? "00" : "01"
+	def nextHold = getHoldMap()[next]
+
+	sendEvent("name":"setpointHold", "value":nextHold)
+
+	// set the duration first if it's changed
+
+    [
+    "st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {$next}", "delay 100" ,
+
+    "raw 0x201 {04 21 11 00 00 05 00 }","delay 200",      // hold expiry time
+  	"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+    ] + getSetPointHoldDuration()
+}
+
+def compareWithNow(d)
+{
+	long mins = (new Date(d)).getTime() - (new Date()).getTime()
+
+	mins /= 1000 * 60;
+
+    log.trace "mins: ${mins}"
+
+    boolean past = (mins < 0)
+    def ret = (past)? "" : "in "
+
+    if (past)
+    	mins *= -1;
+
+    float t = 0;
+	// minutes
+	if (mins < 60)
+	{
+			ret +=  (mins as Integer) + " min" + ((mins > 1)? 's' : '')
+	}else if (mins < 1440)
+	{
+		t = ( Math.round((14 + mins)/30) as Integer) / 2
+        ret += t + " hr" +  ((t > 1)? 's' : '')
+	} else
+    {
+		t = (Math.round((359 + mins)/720) as Integer) / 2
+        ret +=  t + " day" + ((t > 1)? 's' : '')
+	}
+    ret += (past)? " ago": ""
+
+    log.trace "ret: ${ret}"
+
+    ret
+}
+
+def convertToTime(data)
+{
+	def time = Integer.parseInt("$data", 16) as long;
+    time *= 1000;
+    time += 946684800000; // 481418694
+    time -= location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
+
+    def d = new Date(time);
+
+	//log.trace "converted $data to Time $d"
+	return d;
+}
+
+def Program()
+{
+   	def currentSched = device.currentState("prorgammingOperation")?.value
+
+    def next = Integer.parseInt(currentSched?: "00", 16);
+    if ( (next & 0x01) == 0x01)
+    	next = next & 0xfe;
+    else
+    	next = next | 0x01;
+
+	def nextSched = getProgrammingMap()[next & 0x01]
+
+    "st wattr 0x${device.deviceNetworkId} 1 0x201 0x25 0x18 {$next}"
+
+}
+
+
+def getThermostatOperatingState(value)
+{
+	String[] m = [ "heating", "cooling", "fan", "Heat2", "Cool2", "Fan2", "Fan3"]
+	String desc = 'idle'
+		value = Integer.parseInt(''+value, 16)
+
+		// only check for 1-stage  for A1730
+	for ( i in 0..2 ) {
+		if (value & 1 << i)
+			desc = m[i]
+	}
+
+	desc
+}
+
+def checkLastTimeSync(delay)
+{
+	def lastSync = device.currentState("lastTimeSync")?.value
+    if (!lastSync)
+    	lastSync = "${new Date(0)}"
+
+    if (settings.sync_clock ?: false && lastSync != new Date(0))
+    	{
+        	sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+    	}
+
+
+
+	long duration = (new Date()).getTime() - (new Date(lastSync)).getTime()
+
+  //  log.debug "check Time: $lastSync duration: ${duration} settings.sync_clock: ${settings.sync_clock}"
+	if (duration > 86400000)
+		{
+			sendEvent("name":"lastTimeSync", "value":"${new Date()}")
+			return setThermostatTime()
+		}
+
+	return []
+}
+
+def readAttributesCommand(cluster, attribList)
+{
+	def attrString = ''
+
+	for ( val in attribList ) {
+    attrString += ' ' + String.format("%02X %02X", val & 0xff , (val >> 8) & 0xff)
+	}
+
+	//log.trace "list: " + attrString
+
+	["raw "+ cluster + " {00 00 00 $attrString}","delay 100",
+	"send 0x${device.deviceNetworkId} 1 1", "delay 100",
+	]
+}
+
+def refresh()
+{
+	log.debug "refresh called"
+     // log.trace "list: " +       readAttributesCommand(0x201, [0x1C,0x1E,0x23])
+      
+        readAttributesCommand(0x201, [0x00,0x11,0x12]) +
+        readAttributesCommand(0x201, [0x1C,0x1E,0x23]) +
+        readAttributesCommand(0x201, [0x24,0x25,0x29]) +
+        [
+	    "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01", "delay 200",  // lock status
+        "raw 0x201 {04 21 11 00 00 05 00 }"                , "delay 500",  // hold expiary
+	    "send 0x${device.deviceNetworkId} 1 1"             , "delay 1500",
+		]  + checkLastTimeSync(2000)
+}
+
+
+
+
+def poll() {
+	log.trace "poll called"
+	refresh()
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt("$value", 16) / 100
+
+	if(getTemperatureScale() == "C"){
+		return celsius as Integer
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+def setHeatingSetpoint(degrees) {
+	def temperatureScale = getTemperatureScale()
+
+	def degreesInteger = degrees as Integer
+	sendEvent("name":"heatingSetpoint", "value":degreesInteger)
+
+	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius*100) + "}"
+
+}
+
+def setCoolingSetpoint(degrees) {
+	def degreesInteger = degrees as Integer
+	sendEvent("name":"coolingSetpoint", "value":degreesInteger)
+	def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius*100) + "}"
+
+}
+
+def modes() {
+	["off", "heat", "cool"]
+}
+
+def setThermostatFanMode() {
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	//log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+def setThermostatMode() {
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+	def index = modeOrder.indexOf(currentMode)
+	def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+
+	setThermostatMode(next)
+}
+
+def setThermostatMode(String next) {
+	def val = (getModeMap().find { it.value == next }?.key)?: "00"
+
+	// log.trace "mode changing to $next sending value: $val"
+    
+	sendEvent("name":"thermostatMode", "value":"$next")
+	["st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {$val}"] +
+    refresh()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def off() {
+	setThermostatMode("off")
+}
+
+def cool() {
+	setThermostatMode("cool")}
+
+def heat() {
+	setThermostatMode("heat")
+}
+
+def auto() {
+	setThermostatMode("auto")
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	 sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {04}"
+}
+
+
+def fanAuto() {
+	 sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def updated()
+{
+	def lastSync = device.currentState("lastTimeSync")?.value
+	if ((settings.sync_clock ?: false) == false)
+			{
+            	log.debug "resetting last sync time.  Used to be: $lastSync"
+                sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+
+      }
+
+}
+
+def getLockMap()
+{[
+  "00":"Unlocked",
+  "01":"Mode Only",
+  "02":"Setpoint",
+  "03":"Full",
+  "04":"Full",
+  "05":"Full",
+
+]}
+def lock()
+{
+
+	def currentLock = device.currentState("lockLevel")?.value
+  def val = getLockMap().find { it.value == currentLock }?.key
+
+
+
+  //log.debug "current lock is: ${val}"
+
+  if (val == "00")
+      val = getLockMap().find { it.value == (settings.lock_level ?: "Full") }?.key
+  else
+      val = "00"
+
+ "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01"
+
+}
+
+
+def setThermostatTime()
+{
+
+  if ((settings.sync_clock ?: false))
+    {
+      log.debug "sync time is disabled, leaving"
+      return []
+    }
+
+
+  	Date date = new Date();
+  	String zone = location.timeZone.getRawOffset() + " DST " + location.timeZone.getDSTSavings();
+
+	long millis = date.getTime(); // Millis since Unix epoch
+  	millis -= 946684800000;  // adjust for ZigBee EPOCH
+  // adjust for time zone and DST offset
+	millis += location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
+	//convert to seconds
+	millis /= 1000;
+
+	// print to a string for hex capture
+  	String s = String.format("%08X", millis);
+	// hex capture for message format
+  	String data = " " + s.substring(6, 8) + " " + s.substring(4, 6) + " " + s.substring(2, 4)+ " " + s.substring(0, 2);
+
+	[
+  	"raw 0x201 {04 21 11 00 02 0f 00 23 ${data} }",
+  	"send 0x${device.deviceNetworkId} 1 ${endpointId}"
+  	]
+}
+
+def configure() {
+
+ 	[
+			"zdo bind 0x${device.deviceNetworkId} 1 1 0x201 {${device.zigbeeId}} {}", "delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0000 0x29 20 300 {19 00}",  // report temperature changes over 0.2C
+  		    "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+            "zcl global send-me-a-report 0x201 0x001C 0x30 10 305 { }",  // mode
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0025 0x18 10 310 { 00 }",  // schedule on/off
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x001E 0x30 10 315 { 00 }",  // running mode
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0011 0x29 10 320 {32 00}",  // cooling setpoint delta: 0.5C (0x3200 in little endian)
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0012 0x29 10 320 {32 00}", // cooling setpoint delta: 0.5C (0x3200 in little endian)
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0029 0x19 10 325 { 00 }", "delay 200",  // relay status
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 500",
+
+            "zcl global send-me-a-report 0x201 0x0023 0x30 10 330 { 00 }", 		// hold
+            "send 0x${device.deviceNetworkId} 1 ${endpointId}","delay 1500",
+
+	] + refresh()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private getEndpointId()
+{
+	new BigInteger(device.endpointId, 16).toString()
+}

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -19,7 +19,6 @@ metadata {
 		capability "Sensor"
         
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
-		fingerprint deviceId: "0x1006", inClusters: "0x25"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -317,7 +317,7 @@ def setLevel(value) {
     state.trigger = "setLevel"
     state.lvl = "${level}"
 
-    if (dimRate) {
+    if (dimRate && (state?.rate != null)) {
     	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} ${state.rate}}"
     }
     else {
@@ -330,8 +330,7 @@ def setLevel(value) {
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [
 
         //Switch Reporting

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -15,19 +15,27 @@ metadata {
 		// TODO: define status and reply messages here
 	}
 
-	tiles {
+	tiles(scale: 2) {
+     	multiAttributeTile(name:"rich-control"){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			}    
+	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
+	            attributeState "default", label:'SN: ${currentValue}'
+			}    
+        }    
 		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
 			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
 		}
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
 		main (["icon"])
-		details(["networkAddress","serialNumber"])
+		details(["rich-control", "networkAddress"])
 	}
 }
 
@@ -36,7 +44,6 @@ def parse(description) {
 	log.debug "Parsing '${description}'"
 	def results = []
 	def result = parent.parse(this, description)
-
 	if (result instanceof physicalgraph.device.HubAction){
 		log.trace "HUE BRIDGE HubAction received -- DOES THIS EVER HAPPEN?"
 		results << result
@@ -44,32 +51,30 @@ def parse(description) {
 		//do nothing
 		log.trace "HUE BRIDGE was updated"
 	} else {
-		log.trace "HUE BRIDGE, OTHER"
 		def map = description
 		if (description instanceof String)  {
 			map = stringToMap(description)
 		}
 		if (map?.name && map?.value) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
-			results << createEvent(name: "${map?.name}", value: "${map?.value}")
-		}
-		else {
-			log.trace "HUE BRIDGE, OTHER"
+			results << createEvent(name: "${map.name}", value: "${map.value}")
+		} else {
+        	log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
 				if (contentType?.contains("json")) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
-						log.warn "NOT PROCESSED: $msg.body"
-					}
-					else {
-						log.debug "HUE BRIDGE, GENERATING BULB LIST EVENT: $bulbs"
-                        sendEvent(name: "bulbList", value: device.hub.id, isStateChange: true, data: bulbs, displayed: false)
+						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+                        if (parent.state.inBulbDiscovery)
+                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
-					log.debug "HUE BRIDGE, SWALLOWING BRIDGE DESCRIPTION RESPONSE -- BRIDGE ALREADY PRESENT"
+					log.debug "HUE BRIDGE ALREADY PRESENT"
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,4 @@
+
 /**
  *  Hue Bulb
  *
@@ -15,49 +16,40 @@ metadata {
 		capability "Sensor"
 
 		command "setAdjustedColor"
-        command "reset"        
-        command "refresh"
+                command "reset"        
+                command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-	standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821"
-		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff"
-	}
-	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"Color Reset", action:"reset", icon:"st.lights.philips.hue-single"
-	}
-	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-	}
-	controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-		state "color", action:"setAdjustedColor"
-	}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-		state "level", action:"switch level.setLevel"
-	}
-	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		state "level", label: 'Level ${currentValue}%'
-	}
-	controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "saturation", action:"color control.setSaturation"
-	}
-	valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-		state "saturation", label: 'Sat ${currentValue}    '
-	}
-	controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-		state "hue", action:"color control.setHue"
-	}
-	valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
-		state "hue", label: 'Hue ${currentValue}   '
+	tiles (scale: 2){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 	}
 
 	main(["switch"])
 	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
-
 }
 
 // parse events into attributes
@@ -76,13 +68,13 @@ def parse(description) {
 }
 
 // handle commands
-def on(transition = "4") {
-	log.trace parent.on(this,transition)
+def on() {
+	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off(transition = "4") {
-	log.trace parent.off(this,transition)
+def off() {
+	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
@@ -115,9 +107,9 @@ def setHue(percent) {
 	sendEvent(name: "hue", value: percent)
 }
 
-def setColor(value,alert = "none",transition = 4) {
+def setColor(value) {
 	log.debug "setColor: ${value}, $this"
-	parent.setColor(this, value, alert, transition)
+	parent.setColor(this, value)
 	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
 	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
 	if (value.hex) { sendEvent(name: "color", value: value.hex)}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -19,24 +19,41 @@ metadata {
 	simulator {
 		// TODO: define status and reply messages here
 	}
+    
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
+        }
+    
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+        
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+           
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }        
 
-	standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821"
-		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff"
-	}
-	standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-	}
-	controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-		state "level", action:"switch level.setLevel"
-	}
-	valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-		state "level", label: 'Level ${currentValue}%'
-	}
-
-	main(["switch"])
-	details(["switch", "levelSliderControl", "refresh"])
-
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }    
 }
 
 // parse events into attributes

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -0,0 +1,203 @@
+/**
+ *  LIFX Color Bulb
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+metadata {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+		capability "Actuator"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Switch"
+		capability "Switch Level" // brightness
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:''
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setColor"
+		}
+
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..9000)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+			state "colorTemp", label: '${currentValue}K'
+		}
+
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "rgbSelector", "colorTempSliderControl", "colorTemp"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
+}
+
+// handle commands
+def setHue(percentage) {
+	log.debug "setHue ${percentage}"
+	parent.logErrors(logObject: log) {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "hue:${percentage * 3.6}"])
+		if (resp.status < 300) {
+			sendEvent(name: "hue", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setHue result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setSaturation(percentage) {
+	log.debug "setSaturation ${percentage}"
+	parent.logErrors(logObject: log) {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "saturation:${percentage / 100}"])
+		if (resp.status < 300) {
+			sendEvent(name: "saturation", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setSaturation result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColor(Map color) {
+	log.debug "setColor ${color}"
+	def attrs = []
+	def events = []
+	color.each { key, value ->
+		switch (key) {
+			case "hue":
+				attrs << "hue:${value * 3.6}"
+				events << createEvent(name: "hue", value: value)
+				break
+			case "saturation":
+				attrs << "saturation:${value / 100}"
+				events << createEvent(name: "saturation", value: value)
+				break
+			case "colorTemperature":
+				attrs << "kelvin:${value}"
+				events << createEvent(name: "colorTemperature", value: value)
+				break
+		}
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: attrs.join(" ")])
+		if (resp.status < 300) {
+			sendEvent(name: "color", value: color.hex)
+			sendEvent(name: "switch", value: "on")
+			events.each { sendEvent(it) }
+		} else {
+			log.error("Bad setColor result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setLevel(percentage) {
+	log.debug "setLevel ${percentage}"
+	if (percentage < 1 && percentage > 0) {
+		percentage = 1 // clamp to 1%
+	}
+	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
+		return off() // if the brightness is set to 0, just turn it off
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		if (resp.status < 300) {
+			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColorTemperature(kelvin) {
+	log.debug "Executing 'setColorTemperature' to ${kelvin}"
+	parent.logErrors() {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		if (resp.status < 300) {
+			sendEvent(name: "colorTemperature", value: kelvin)
+			sendEvent(name: "color", value: "#ffffff")
+			sendEvent(name: "saturation", value: 0)
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+
+	}
+}
+
+def on() {
+	log.debug "Device setOn"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+			sendEvent(name: "switch", value: "on")
+		}
+	}
+}
+
+def off() {
+	log.debug "Device setOff"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+			sendEvent(name: "switch", value: "off")
+		}
+	}
+}
+
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		return []
+	}
+	def data = resp.data
+
+	sendEvent(name: "level", value: sprintf("%.1f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
+	sendEvent(name: "hue",        value: data.color.hue / 3.6)
+	sendEvent(name: "saturation", value: data.color.saturation * 100)
+	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
+}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -0,0 +1,137 @@
+/**
+ *  LIFX White Bulb
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+metadata {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+		capability "Actuator"
+		capability "Color Temperature"
+		capability "Switch"
+		capability "Switch Level" // brightness
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:''
+		}
+
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+			state "colorTemp", label: '${currentValue}K'
+		}
+
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "colorTempSliderControl", "colorTemp"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	if (description == 'updated') {
+		return // don't poll when config settings is being updated as it may time out
+	}
+	poll()
+}
+
+// handle commands
+def setLevel(percentage) {
+	log.debug "setLevel ${percentage}"
+	if (percentage < 1 && percentage > 0) {
+		percentage = 1 // clamp to 1%
+	}
+	if (percentage == 0) {
+		sendEvent(name: "level", value: 0) // Otherwise the level value tile does not update
+		return off() // if the brightness is set to 0, just turn it off
+	}
+	parent.logErrors(logObject:log) {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		if (resp.status < 300) {
+			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def setColorTemperature(kelvin) {
+	log.debug "Executing 'setColorTemperature' to ${kelvin}"
+	parent.logErrors() {
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		if (resp.status < 300) {
+			sendEvent(name: "colorTemperature", value: kelvin)
+			sendEvent(name: "color", value: "#ffffff")
+			sendEvent(name: "saturation", value: 0)
+			sendEvent(name: "switch", value: "on")
+		} else {
+			log.error("Bad setColorTemperature result: [${resp.status}] ${resp.data}")
+		}
+	}
+}
+
+def on() {
+	log.debug "Device setOn"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+			sendEvent(name: "switch", value: "on")
+		}
+	}
+}
+
+def off() {
+	log.debug "Device setOff"
+	parent.logErrors() {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+			sendEvent(name: "switch", value: "off")
+		}
+	}
+}
+
+def poll() {
+	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
+		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
+		return []
+	}
+	def data = resp.data
+
+	sendEvent(name: "level", value: sprintf("%f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
+	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+
+	return []
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	poll()
+}

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -24,8 +24,8 @@ metadata {
         command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3041"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3043"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3045"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3043", deviceJoinName: "NYCE Ceiling Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3045", deviceJoinName: "NYCE Curtain Motion Sensor"
 	}
 
 	tiles {
@@ -201,10 +201,10 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    	"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+    	"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
         
         "zcl global send-me-a-report 1 0x20 0x20 0x3600 0x3600 {01}", "delay 200",

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,10 +24,10 @@ metadata {
         command "enrollResponse"
  
  
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
  
 	simulator {
@@ -280,7 +280,7 @@ private List parseIasMessage(String description) {
 }
 
 def configure() {
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
 	def configCmds = [
 			//battery reporting and heartbeat
@@ -290,7 +290,7 @@ def configure() {
 
 
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
-			"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -22,10 +22,8 @@ metadata {
 
         command "setAdjustedColor"
 
-
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
-
     }
 
     // simulator metadata

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -41,7 +41,7 @@ metadata {
 	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -287,7 +287,8 @@ def isDescriptionPower(descMap) {
 	def powerValue = "undefined"
 	if (descMap.cluster == "0B04") {
 		if (descMap.attrId == "050b") {
-			powerValue = convertHexToInt(descMap.value)
+			if(descMap.value!="ffff")
+				powerValue = convertHexToInt(descMap.value)
 		}
 	}
 	else if (descMap.clusterId == "0B04") {
@@ -327,10 +328,9 @@ def levelConfig() {
 //min change in value is 05
 def powerConfig() {
 	[
-			//Meter (Power) Reporting
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 0x0B04 0x050B 0x2A 1 600 {05}",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,8 +1,19 @@
 /**
- *	CentraLite Switch
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
  *
  *	Author: SmartThings
- *	Date: 2013-12-02
+ *	Date: 2015-08-23
  */
 metadata {
 	// Automatically generated. Make future change here.
@@ -17,6 +28,9 @@ metadata {
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 
@@ -31,22 +45,33 @@ metadata {
 		reply "zcl on-off off": "on/off: 0"
 	}
 
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+	}
+
 	// UI tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
 			}
 			tileAttribute ("power", key: "SECONDARY_CONTROL") {
 				attributeState "power", label:'${currentValue} W'
 			}
 		}
-		
+
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
 		main "switch"
 		details(["switch","refresh"])
 	}
@@ -54,67 +79,92 @@ metadata {
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.debug "Parse description $description"
-	def name = null
-	def value = null
+	log.debug "description is $description"
 
 	// save heartbeat (i.e. last time we got a message from device)
 	state.heartbeat = Calendar.getInstance().getTimeInMillis()
 
-	if (description?.startsWith("read attr -")) {
-		def descMap = parseDescriptionAsMap(description)
-		log.debug "Read attr: $description"
-		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
-			name = "switch"
-			value = descMap.value.endsWith("01") ? "on" : "off"
-		} else if (descMap.cluster.equalsIgnoreCase("0B04") && descMap.attrId.equalsIgnoreCase("050b")) {
-			def reportValue = descMap.value
-			name = "power"
-			//power divisor is 10
-			value = Integer.parseInt(reportValue, 16) / 10
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
 		}
-	} else if (description?.startsWith("on/off:")) {
-		log.debug "Switch command"
-		name = "switch"
-		value = description?.endsWith(" 1") ? "on" : "off"
 	}
-
-	def result = createEvent(name: name, value: value)
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
-// Commands to device
-def on() {
-	'zcl on-off on'
-}
-
 def off() {
-	'zcl on-off off'
+	zigbee.off()
 }
 
-def meter() {
-	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+def on() {
+	zigbee.on()
 }
 
 def refresh() {
 	sendEvent(name: "heartbeat", value: "alive", displayed:false)
-	[
-			"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
-	]
+	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
-	def configCmds = [
-			"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-			"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}", "delay 200"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 1 600 {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -22,11 +22,11 @@ metadata {
 		capability "Water Sensor"
         
         command "enrollResponse"
- 
- 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S"
-	        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
-       		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu"
+
+
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 
 	}
  
@@ -35,18 +35,27 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture1.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture2.png",
+				"http://cdn.device-gse.smartthings.com/Moisture/Moisture3.png"
+				])
+		}
+		section {
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
 	}
  
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -64,7 +73,7 @@ metadata {
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
 		main (["water", "temperature"])
 		details(["water", "temperature", "battery", "refresh"])
 	}
@@ -255,52 +264,51 @@ private Map getMoistureResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	[
-		
-
+	def refreshCmds = [
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [	
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 300 0600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x001 {${device.zigbeeId}} {}", "delay 1000",
-        
-        "raw 0x500 {01 23 00 00 00}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+    [
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
     ]
 }
 
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -35,8 +35,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		standardTile("temperature", "device.temperature", width: 2, height: 2) {
@@ -47,6 +47,7 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
+
 		main (["water", "temperature"])
 		details(["water", "temperature", "battery"])
 	}
@@ -128,6 +129,15 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 	map
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	def map = [:]
+	map.name = "water"
+	map.value = cmd.value ? "wet" : "dry"
+	map.descriptionText = "${device.displayName} is ${map.value}"
+	map
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd)
 {
 	log.debug "COMMAND CLASS: $cmd"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -25,7 +25,7 @@ metadata {
         command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
@@ -37,8 +37,17 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Motion/Motion1.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion2.jpg",
+				"http://cdn.device-gse.smartthings.com/Motion/Motion3.jpg"
+				])
+		}
+		section {
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
 	}
 
 	tiles(scale: 2) {
@@ -137,10 +146,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-    return Math.round(Double.parseDouble(value))
-}
- 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -226,29 +231,30 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
-    log.debug rawValue
-    
-    def result = [
-    	name: 'battery',
-        value: '--'
-    ]
-    
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
 	def volts = rawValue / 10
 	def descriptionText
-    
-    if (rawValue == 0) {}
-     else {
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+
+	if (rawValue == 0) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
 	}
-	else if (volts > 0){
-		def minVolts = 2.1
-    	def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-	}}
 
 	return result
 }
@@ -280,51 +286,50 @@ private Map getMotionResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "refresh called"
-    [
+	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-		
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    
-   		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x402 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-        "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-        
-        "zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x20 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 1 0x20 0x20 300 3600 {01}", 
-        "send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x001 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", 
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}"
-        
- 
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 ${endpointId}"
-        
-    ]
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
 }
 
 private hex(value) {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Battery"
         capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Sensor"
         
         command "enrollResponse"
 
@@ -136,10 +137,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-    return Math.round(Double.parseDouble(value))
-}
- 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -225,22 +222,29 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
-    def result = [
-    	name: 'battery'
-    ]
-    
+
+	log.debug rawValue
+
+	def result = [
+		name: 'battery',
+		value: '--'
+	]
+
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
+
+	if (rawValue == 0) {}
 	else {
-		def minVolts = 2.1
-    	def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
+		if (volts > 3.5) {
+			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+		}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}
 	}
 
 	return result
@@ -273,50 +277,52 @@ private Map getMotionResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "refresh called"
-    [
+	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-		
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-    	"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 300 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x001 {${device.zigbeeId}} {}", "delay 1500",
-        
-        "raw 0x500 {01 23 00 00 00}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
     ]
 }
 
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -29,8 +29,9 @@
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S"
-       
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+
+		attribute "status", "string"
  	}
 
  	simulator {
@@ -51,18 +52,36 @@
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
  	preferences {
- 		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi2.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi3.jpg",
+				"http://cdn.device-gse.smartthings.com/Multi/Multi4.jpg"
+				])
+		}
+		section {
+ 			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		}
+		section {
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+		}
  	}
 
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
 				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
 				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+				attributeState "garage-open", label:'Open', icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e"
+				attributeState "garage-closed", label:'Closed', icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821"
 			}
 		}
-
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
@@ -90,8 +109,9 @@
  			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
  		}
 
-		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery", "refresh"])
+
+		main(["status", "acceleration", "temperature"])
+		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
 	}
  }
 
@@ -158,10 +178,6 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private int getHumidity(value) {
-	return Math.round(Double.parseDouble(value))
-}
-
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
@@ -202,11 +218,15 @@ private Map parseIasMessage(String description) {
 	Map resultMap = [:]
 	switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
         break
 
         case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
         break
 
         case '0x0022': // Tamper Alarm
@@ -216,11 +236,15 @@ private Map parseIasMessage(String description) {
         break
 
         case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
         break
 
         case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
         break
 
         case '0x0026': // Trouble/Failure
@@ -232,6 +256,29 @@ private Map parseIasMessage(String description) {
     return resultMap
 }
 
+def updated() {
+	log.debug "updated called"
+	log.info "garage value : $garageSensor"
+	if (garageSensor == "Yes") {
+		def descriptionText = "Updating device to garage sensor"
+		if (device.latestValue("status") == "open") {
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
+		}
+		else if (device.latestValue("status") == "closed") {
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
+		}
+	}
+	else {
+		def descriptionText = "Updating device to open/close sensor"
+		if (device.latestValue("status") == "garage-open") {
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
+		}
+		else if (device.latestValue("status") == "garage-closed") {
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
+		}
+	}
+}
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -291,11 +338,8 @@ def getTemperature(value) {
 		log.debug "Contact"
 		def linkText = getLinkText(device)
 		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-		return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText
-		]
+		sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: value, descriptionText: descriptionText)
 	}
 
 	private getAccelerationResult(numValue) {
@@ -313,77 +357,72 @@ def getTemperature(value) {
 		]
 	}
 
-	def refresh()
-	{
+	def refresh() {
 		log.debug "Refreshing Values "
-		[
+		def refreshCmds = [
         
         /* sensitivity - default value (8) */
         
         "zcl mfg-code 0x104E", "delay 200",
         "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0000", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
+
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0010", "delay 100",
+        "zcl global read 0xFC02 0x0010",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0012", "delay 100",
+        "zcl global read 0xFC02 0x0012",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0013", "delay 100",
+        "zcl global read 0xFC02 0x0013",
         "send 0x${device.deviceNetworkId} 1 1","delay 400",
         
         "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0014", "delay 100",
-        "send 0x${device.deviceNetworkId} 1 1"
+        "zcl global read 0xFC02 0x0014",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
+		]
 
-		] 
+		return refreshCmds + enrollResponse()
 	}
 
 	def configure() {
 
-		String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+		String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting"
 		
-        def configCmds = [
-        
-        "zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global write 0x500 0x10 0xf0 {${zigbeeId}}",
+		def configCmds = [
+
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x20 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x402 {${device.zigbeeId}} {}", "delay 200",
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
 		"zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0010 0x18 300 3600 {01}",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0012 0x29 300 3600 {01}",
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0013 0x29 300 3600 {01}", 
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-        
-        "zcl mfg-code 0x104E", 
-        "zcl global send-me-a-report 0xFC02 0x0014 0x29 300 3600 {01}", 
+
+		"zcl mfg-code 0x104E",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 
 		]
@@ -397,11 +436,14 @@ private getEndpointId() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-	"send 0x${device.deviceNetworkId} 1 1"
-
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
@@ -430,13 +472,33 @@ private Map parseAxis(String description) {
 			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
 			xyzResults.z = signedZ
             log.debug "Z Part: ${signedZ}"
+			if (garageSensor == "Yes")
+				garageEvent(signedZ)
         }
     }
 
 	getXyzResult(xyzResults, description)
 }
 
-
+def garageEvent(zValue) {
+	def absValue = zValue.abs()
+	def contactValue = null
+	def garageValue = null
+	if (absValue>900) {
+		contactValue = 'closed'
+		garageValue = 'garage-closed'
+	}
+	else if (absValue < 100) {
+		contactValue = 'open'
+		garageValue = 'garage-open'
+	}
+	if (contactValue != null){
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
+	}
+}
 
 private Map getXyzResult(results, description) {
 	def name = "threeAxis"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -284,52 +284,59 @@ def getTemperature(value) {
 		]
 	}
 
-	def refresh()
-	{
+	def refresh() {
 		log.debug "Refreshing Temperature and Battery "
-		[
+		def refreshCmds = [
 
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		//"st rattr 0x${device.deviceNetworkId} 1 0xFC02 2", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 
 		]
+
+		return refreshCmds + enrollResponse()
 	}
 
-	def configure() {
+def configure() {
 
-		String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-		log.debug "Confuguring Reporting, IAS CIE, and Bindings."
-		def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl global send-me-a-report 0xFC02 2 0x18 300 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
-
-		]
-    return configCmds + refresh() // send refresh cmds as part of config
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	[
-
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-	"send 0x${device.deviceNetworkId} 1 1"
-
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -260,51 +260,52 @@ private Map getContactResult(value) {
 	]
 }
 
-def refresh()
-{
+def refresh() {
 	log.debug "Refreshing Temperature and Battery"
-	[
-    
+	def refreshCmds = [
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-        //"raw 0x500 {01 23 00 00 00}", "delay 200",
-        //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
     return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
-	"raw 0x500 {01 23 00 00 00}", "delay 200",
-    "send 0x${device.deviceNetworkId} 1 1"
-        
-    ]
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
 }
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
 private hex(value) {
 	new BigInteger(Math.round(value).toString()).toString(16)
 }

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -251,25 +251,21 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
-
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {0100}", "delay 500",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zcl global send-me-a-report 0xFC45 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 1000",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}"
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/smartweather-station-tile.src/smartweather-station-tile.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
 
 		attribute "localSunrise", "string"
 		attribute "localSunset", "string"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -270,12 +270,12 @@ def refresh()
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting, IAS CIE, and Bindings."
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
         
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeId}}", "delay 200",
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
         
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -134,8 +134,7 @@ def setLevel(value) {
 
 def configure() {
 
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Confuguring Reporting and Bindings."
+	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [	
   
         //Switch Reporting

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+		capability "Valve"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint deviceId: "0x1006", inClusters: "0x25"
+	}
+
+	// simulator metadata
+	simulator {
+		status "open": "command: 2503, payload: FF"
+		status "close":  "command: 2503, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+
+	// tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#ffe71e"
+				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffe71e"
+			}
+		}
+
+		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "valve"
+		details(["valve","refresh"])
+	}
+
+}
+
+def updated() {
+	response(refresh())
+}
+
+def parse(String description) {
+	log.trace "parse description : $description"
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
+    log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+    def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+    updateDataValue("MSR", msr)
+    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	[:] // Handles all Z-Wave commands we aren't interested in
+}
+
+def open() {
+    delayBetween([
+            zwave.basicV1.basicSet(value: 0xFF).format(),
+            zwave.switchBinaryV1.switchBinaryGet().format()
+    ],10000) //wait for a water valve to be completely opened
+}
+
+def close() {
+    delayBetween([
+            zwave.basicV1.basicSet(value: 0x00).format(),
+            zwave.switchBinaryV1.switchBinaryGet().format()
+    ],10000) //wait for a water valve to be completely closed
+}
+
+def poll() {
+    zwave.switchBinaryV1.switchBinaryGet().format()
+}
+
+def refresh() {
+    log.debug "refresh() is called"
+    def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
+    if (getDataValue("MSR") == null) {
+        commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+    }
+    delayBetween(commands,100)
+}

devicetypes/zenwithin/zen-thermostat.src/zen-thermostat.groovy

@@ -8,6 +8,7 @@ metadata {
   definition (name: "Zen Thermostat", namespace: "zenwithin", author: "ZenWithin") {
     capability "Actuator"
     capability "Thermostat"
+    capability "Temperature Measurement"
     capability "Configuration"
     capability "Refresh"
     capability "Sensor"

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -11,8 +11,13 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *
+ *  
+ *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
+ *  devices for which the user has authorized. Likewise, Initial State's services call this 
+ *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
+ *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
+
 definition(
     name: "Initial State Event Streamer",
     namespace: "initialstate.events",
@@ -28,32 +33,31 @@ import groovy.json.JsonSlurper
 
 preferences {
 	section("Choose which devices to monitor...") {
-        //input "accelerometers", "capability.accelerationSensor", title: "Accelerometers", multiple: true, required: false
+        input "accelerometers", "capability.accelerationSensor", title: "Accelerometers", multiple: true, required: false
         input "alarms", "capability.alarm", title: "Alarms", multiple: true, required: false
-        //input "batteries", "capability.battery", title: "Batteries", multiple: true, required: false
-        //input "beacons", "capability.beacon", title: "Beacons", multiple: true, required: false
-        //input "buttons", "capability.button", title: "Buttons", multiple: true, required: false
-        //input "cos", "capability.carbonMonoxideDetector", title: "Carbon  Monoxide Detectors", multiple: true, required: false
-        //input "colors", "capability.colorControl", title: "Color Controllers", multiple: true, required: false
+        input "batteries", "capability.battery", title: "Batteries", multiple: true, required: false
+        input "beacons", "capability.beacon", title: "Beacons", multiple: true, required: false
+        input "cos", "capability.carbonMonoxideDetector", title: "Carbon  Monoxide Detectors", multiple: true, required: false
+        input "colors", "capability.colorControl", title: "Color Controllers", multiple: true, required: false
         input "contacts", "capability.contactSensor", title: "Contact Sensors", multiple: true, required: false
-        //input "doorsControllers", "capability.doorControl", title: "Door Controllers", multiple: true, required: false
-        //input "energyMeters", "capability.energyMeter", title: "Energy Meters", multiple: true, required: false
-        //input "illuminances", "capability.illuminanceMeasurement", title: "Illuminance Meters", multiple: true, required: false
+        input "doorsControllers", "capability.doorControl", title: "Door Controllers", multiple: true, required: false
+        input "energyMeters", "capability.energyMeter", title: "Energy Meters", multiple: true, required: false
+        input "illuminances", "capability.illuminanceMeasurement", title: "Illuminance Meters", multiple: true, required: false
         input "locks", "capability.lock", title: "Locks", multiple: true, required: false
         input "motions", "capability.motionSensor", title: "Motion Sensors", multiple: true, required: false
-        //input "musicPlayers", "capability.musicPlayer", title: "Music Players", multiple: true, required: false
-        //input "powerMeters", "capability.powerMeter", title: "Power Meters", multiple: true, required: false
+        input "musicPlayers", "capability.musicPlayer", title: "Music Players", multiple: true, required: false
+        input "powerMeters", "capability.powerMeter", title: "Power Meters", multiple: true, required: false
         input "presences", "capability.presenceSensor", title: "Presence Sensors", multiple: true, required: false
         input "humidities", "capability.relativeHumidityMeasurement", title: "Humidity Meters", multiple: true, required: false
-        //input "relaySwitches", "capability.relaySwitch", title: "Relay Switches", multiple: true, required: false
-        //input "sleepSensors", "capability.sleepSensor", title: "Sleep Sensors", multiple: true, required: false
-        //input "smokeDetectors", "capability.smokeDetector", title: "Smoke Detectors", multiple: true, required: false
-        //input "peds", "capability.stepSensor", title: "Pedometers", multiple: true, required: false
+        input "relaySwitches", "capability.relaySwitch", title: "Relay Switches", multiple: true, required: false
+        input "sleepSensors", "capability.sleepSensor", title: "Sleep Sensors", multiple: true, required: false
+        input "smokeDetectors", "capability.smokeDetector", title: "Smoke Detectors", multiple: true, required: false
+        input "peds", "capability.stepSensor", title: "Pedometers", multiple: true, required: false
         input "switches", "capability.switch", title: "Switches", multiple: true, required: false
         input "switchLevels", "capability.switchLevel", title: "Switch Levels", multiple: true, required: false
         input "temperatures", "capability.temperatureMeasurement", title: "Temperature Sensors", multiple: true, required: false
         input "thermostats", "capability.thermostat", title: "Thermostats", multiple: true, required: false
-        //input "valves", "capability.valve", title: "Valves", multiple: true, required: false
+        input "valves", "capability.valve", title: "Valves", multiple: true, required: false
         input "waterSensors", "capability.waterSensor", title: "Water Sensors", multiple: true, required: false
     }
 }
@@ -74,77 +78,71 @@ mappings {
 }
 
 def subscribeToEvents() {
-	/*if (accelerometers != null) {
+	if (accelerometers != null) {
 		subscribe(accelerometers, "acceleration", genericHandler)
-	}*/
+	}
 	if (alarms != null) {
 		subscribe(alarms, "alarm", genericHandler)
 	}
-	/*if (batteries != null) {
+	if (batteries != null) {
 		subscribe(batteries, "battery", genericHandler)
-	}*/
-	/*if (beacons != null) {
+	}
+	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
-	}*/
-	/*
-	if (buttons != null) {
-		subscribe(buttons, "button", genericHandler)
-	}*/
-	/*if (cos != null) {
+	}
+	
+	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
-	}*/
-	/*if (colors != null) {
+	}
+	if (colors != null) {
 		subscribe(colors, "hue", genericHandler)
 		subscribe(colors, "saturation", genericHandler)
 		subscribe(colors, "color", genericHandler)
-	}*/
+	}
 	if (contacts != null) {
 		subscribe(contacts, "contact", genericHandler)
 	}
-	/*if (doorsControllers != null) {
-		subscribe(doorsControllers, "door", genericHandler)
-	}*/
-	/*if (energyMeters != null) {
+	if (energyMeters != null) {
 		subscribe(energyMeters, "energy", genericHandler)
-	}*/
-	/*if (illuminances != null) {
+	}
+	if (illuminances != null) {
 		subscribe(illuminances, "illuminance", genericHandler)
-	}*/
+	}
 	if (locks != null) {
 		subscribe(locks, "lock", genericHandler)
 	}
 	if (motions != null) {
 		subscribe(motions, "motion", genericHandler)
 	}
-	/*if (musicPlayers != null) {
+	if (musicPlayers != null) {
 		subscribe(musicPlayers, "status", genericHandler)
 		subscribe(musicPlayers, "level", genericHandler)
 		subscribe(musicPlayers, "trackDescription", genericHandler)
 		subscribe(musicPlayers, "trackData", genericHandler)
 		subscribe(musicPlayers, "mute", genericHandler)
-	}*/
-	/*if (powerMeters != null) {
+	}
+	if (powerMeters != null) {
 		subscribe(powerMeters, "power", genericHandler)
-	}*/
+	}
 	if (presences != null) {
 		subscribe(presences, "presence", genericHandler)
 	}
 	if (humidities != null) {
 		subscribe(humidities, "humidity", genericHandler)
 	}
-	/*if (relaySwitches != null) {
+	if (relaySwitches != null) {
 		subscribe(relaySwitches, "switch", genericHandler)
-	}*/
-	/*if (sleepSensors != null) {
+	}
+	if (sleepSensors != null) {
 		subscribe(sleepSensors, "sleeping", genericHandler)
-	}*/
-	/*if (smokeDetectors != null) {
+	}
+	if (smokeDetectors != null) {
 		subscribe(smokeDetectors, "smoke", genericHandler)
-	}*/
-	/*if (peds != null) {
+	}
+	if (peds != null) {
 		subscribe(peds, "steps", genericHandler)
 		subscribe(peds, "goal", genericHandler)
-	}*/
+	}
 	if (switches != null) {
 		subscribe(switches, "switch", genericHandler)
 	}
@@ -163,9 +161,9 @@ def subscribeToEvents() {
 		subscribe(thermostats, "thermostatFanMode", genericHandler)
 		subscribe(thermostats, "thermostatOperatingState", genericHandler)
 	}
-	/*if (valves != null) {
+	if (valves != null) {
 		subscribe(valves, "contact", genericHandler)
-	}*/
+	}
 	if (waterSensors != null) {
 		subscribe(waterSensors, "water", genericHandler)
 	}
@@ -173,23 +171,23 @@ def subscribeToEvents() {
 
 def getAccessKey() {
 	log.trace "get access key"
-	if (state.accessKey == null) {
+	if (atomicState.accessKey == null) {
 		httpError(404, "Access Key Not Found")
 	} else {
 		[
-			accessKey: state.accessKey
+			accessKey: atomicState.accessKey
 		]
 	}
 }
 
 def getBucketKey() {
 	log.trace "get bucket key"
-	if (state.bucketKey == null) {
+	if (atomicState.bucketKey == null) {
 		httpError(404, "Bucket key Not Found")
 	} else {
 		[
-			bucketKey: state.bucketKey,
-			bucketName: state.bucketName
+			bucketKey: atomicState.bucketKey,
+			bucketName: atomicState.bucketName
 		]
 	}
 }
@@ -202,53 +200,94 @@ def setBucketKey() {
 	log.debug "bucket name: $newBucketName"
 	log.debug "bucket key: $newBucketKey"
 
-	if (newBucketKey && (newBucketKey != state.bucketKey || newBucketName != state.bucketName)) {
-		state.bucketKey = "$newBucketKey"
-		state.bucketName = "$newBucketName"
-		state.isBucketCreated = false
+	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
+		atomicState.bucketKey = "$newBucketKey"
+		atomicState.bucketName = "$newBucketName"
+		atomicState.isBucketCreated = false
 	}
+
+	tryCreateBucket()
 }
 
 def setAccessKey() {
 	log.trace "set access key"
 	def newAccessKey = request.JSON?.accessKey
+	def newGrokerSubdomain = request.JSON?.grokerSubdomain
 
-	if (newAccessKey && newAccessKey != state.accessKey) {
-		state.accessKey = "$newAccessKey"
-		state.isBucketCreated = false
+	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
+		atomicState.grokerSubdomain = "$newGrokerSubdomain"
+		atomicState.isBucketCreated = false
+	}
+    
+	if (newAccessKey && newAccessKey != atomicState.accessKey) {
+		atomicState.accessKey = "$newAccessKey"
+		atomicState.isBucketCreated = false
 	}
 }
 
 def installed() {
-
+	atomicState.version = "1.0.18"
 	subscribeToEvents()
 
-	state.isBucketCreated = false
+	atomicState.isBucketCreated = false
+	atomicState.grokerSubdomain = "groker"
+	atomicState.eventBuffer = []
+
+	runEvery15Minutes(flushBuffer)
+
+	log.debug "installed (version $atomicState.version)"
 }
 
 def updated() {
+	atomicState.version = "1.0.18"
 	unsubscribe()
 
-	if (state.bucketKey != null && state.accessKey != null) {
-		state.isBucketCreated = false
+	if (atomicState.bucketKey != null && atomicState.accessKey != null) {
+		atomicState.isBucketCreated = false
 	}
-	
+	if (atomicState.eventBuffer == null) {
+		atomicState.eventBuffer = []
+	}
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		atomicState.grokerSubdomain = "groker"
+	}
+
 	subscribeToEvents()
+
+	log.debug "updated (version $atomicState.version)"
 }
 
-def createBucket() {
+def uninstalled() {
+	log.debug "uninstalled (version $atomicState.version)"
+}
 
-	if (!state.bucketName) {
-    	state.bucketName = state.bucketKey
+def tryCreateBucket() {
+	
+	// can't ship events if there is no grokerSubdomain
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		log.error "streaming url is currently null"
+		return
+	}
+
+	// if the bucket has already been created, no need to continue
+	if (atomicState.isBucketCreated) {
+		return
+	}
+
+	if (!atomicState.bucketName) {
+    	atomicState.bucketName = atomicState.bucketKey
     }
-	def bucketName = "${state.bucketName}"
-	def bucketKey = "${state.bucketKey}"
-	def accessKey = "${state.accessKey}"
+    if (!atomicState.accessKey) {
+    	return
+    }
+	def bucketName = "${atomicState.bucketName}"
+	def bucketKey = "${atomicState.bucketKey}"
+	def accessKey = "${atomicState.accessKey}"
 
 	def bucketCreateBody = new JsonSlurper().parseText("{\"bucketKey\": \"$bucketKey\", \"bucketName\": \"$bucketName\"}")
 
 	def bucketCreatePost = [
-		uri: 'https://groker.initialstate.com/api/buckets',
+		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/buckets",
 		headers: [
 			"Content-Type": "application/json",
 			"X-IS-AccessKey": accessKey
@@ -258,10 +297,20 @@ def createBucket() {
 
 	log.debug bucketCreatePost
 
-	httpPostJson(bucketCreatePost) {
-		log.debug "bucket posted"
-		state.isBucketCreated = true
+	try {
+		// Create a bucket on Initial State so the data has a logical grouping
+		httpPostJson(bucketCreatePost) { resp ->
+			log.debug "bucket posted"
+			if (resp.status >= 400) {
+				log.error "bucket not created successfully"
+			} else {
+				atomicState.isBucketCreated = true
+			}
+		}
+	} catch (e) {
+		log.error "bucket creation error: $e"
 	}
+
 }
 
 def genericHandler(evt) {
@@ -273,33 +322,80 @@ def genericHandler(evt) {
 	}
 	def value = "$evt.value"
 
+	tryCreateBucket()
+
 	eventHandler(key, value)
 }
 
-def eventHandler(name, value) {
+// This is a handler function for flushing the event buffer
+// after a specified amount of time to reduce the load on ST servers
+def flushBuffer() {
+	log.trace "About to flush the buffer on schedule"
+	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
+		tryShipEvents()
+	}
+}
 
-	if (state.accessKey == null || state.bucketKey == null) {
+def eventHandler(name, value) {
+	log.debug atomicState.eventBuffer
+
+	def eventBuffer = atomicState.eventBuffer
+	def epoch = now() / 1000
+	
+	// if for some reason this code block is being run
+	// but the SmartApp wasn't propery setup during install
+	// we need to set initialize the eventBuffer.
+	if (!atomicState.eventBuffer) {
+		atomicState.eventBuffer = []
+	}
+	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
+	
+	log.debug eventBuffer
+
+	atomicState.eventBuffer = eventBuffer
+
+	if (eventBuffer.size() >= 10) {
+		tryShipEvents()
+	}
+}
+
+// a helper function for shipping the atomicState.eventBuffer to Initial State
+def tryShipEvents() {
+
+	// can't ship events if there is no grokerSubdomain
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+		log.error "streaming url is currently null"
+		return
+	}
+	// can't ship if access key and bucket key are null, so finish trying
+	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
 		return
 	}
 
-	if (!state.isBucketCreated) {
-		createBucket()
-	}
-
-	def eventBody = new JsonSlurper().parseText("[{\"key\": \"$name\", \"value\": \"$value\"}]")
 	def eventPost = [
-		uri: 'https://groker.initialstate.com/api/events',
+		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${state.bucketKey}",
-			"X-IS-AccessKey": "${state.accessKey}"
+			"X-IS-BucketKey": "${atomicState.bucketKey}",
+			"X-IS-AccessKey": "${atomicState.accessKey}",
+			"Accept-Version": "0.0.2"
 		],
-		body: eventBody
+		body: atomicState.eventBuffer
 	]
 
-	log.debug eventPost
-
-	httpPostJson(eventPost) {
-		log.debug "event data posted"
+	try {
+		// post the events to initial state
+		httpPostJson(eventPost) { resp ->
+			log.debug "shipped events and got ${resp.status}"
+			if (resp.status >= 400) {
+				log.error "shipping failed... ${resp.data}"
+			} else {
+				// clear the buffer
+				atomicState.eventBuffer = []
+			}
+		}
+	} catch (e) {
+		log.error "shipping events failed: $e"
 	}
+	
 }

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -0,0 +1,606 @@
+/**
+ *  Bose SoundTouch (Connect)
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ definition(
+    name: "Bose SoundTouch (Connect)",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Control your Bose SoundTouch speakers",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
+)
+
+preferences {
+    page(name:"deviceDiscovery", title:"Device Setup", content:"deviceDiscovery", refreshTimeout:5)
+}
+
+/**
+ * Get the urn that we're looking for
+ *
+ * @return URN which we are looking for
+ *
+ * @todo This + getUSNQualifier should be one and should use regular expressions
+ */
+def getDeviceType() {
+    return "urn:schemas-upnp-org:device:MediaRenderer:1" // Bose
+}
+
+/**
+ * If not null, returns an additional qualifier for ssdUSN
+ * to avoid spamming the network
+ *
+ * @return Additional qualifier OR null if not needed
+ */
+def getUSNQualifier() {
+    return "uuid:BO5EBO5E-F00D-F00D-FEED-"
+}
+
+/**
+ * Get the name of the new device to instantiate in the user's smartapps
+ * This must be an app owned by the namespace (see #getNameSpace).
+ *
+ * @return name
+ */
+def getDeviceName() {
+    return "Bose SoundTouch"
+}
+
+/**
+ * Returns the namespace this app and siblings use
+ *
+ * @return namespace
+ */
+def getNameSpace() {
+    return "smartthings"
+}
+
+/**
+ * The deviceDiscovery page used by preferences. Will automatically
+ * make calls to the underlying discovery mechanisms as well as update
+ * whenever new devices are discovered AND verified.
+ *
+ * @return a dynamicPage() object
+ */
+def deviceDiscovery()
+{
+    if(canInstallLabs())
+    {
+        def refreshInterval = 3 // Number of seconds between refresh
+        int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
+        state.deviceRefreshCount = deviceRefreshCount + refreshInterval
+
+        def devices = getSelectableDevice()
+        def numFound = devices.size() ?: 0
+
+        // Make sure we get location updates (contains LAN data such as SSDP results, etc)
+        subscribeNetworkEvents()
+
+        //device discovery request every 15s
+        if((deviceRefreshCount % 15) == 0) {
+            discoverDevices()
+        }
+
+        // Verify request every 3 seconds except on discoveries
+        if(((deviceRefreshCount % 3) == 0) && ((deviceRefreshCount % 15) != 0)) {
+            verifyDevices()
+        }
+
+        log.trace "Discovered devices: ${devices}"
+
+        return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+            section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
+            }
+        }
+    }
+    else
+    {
+        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+        return dynamicPage(name:"deviceDiscovery", title:"Upgrade needed!", nextPage:"", install:true, uninstall: true) {
+            section("Upgrade") {
+                paragraph "$upgradeNeeded"
+            }
+        }
+    }
+}
+
+/**
+ * Called by SmartThings Cloud when user has selected device(s) and
+ * pressed "Install".
+ */
+def installed() {
+    log.trace "Installed with settings: ${settings}"
+    initialize()
+}
+
+/**
+ * Called by SmartThings Cloud when app has been updated
+ */
+def updated() {
+    log.trace "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+/**
+ * Called by SmartThings Cloud when user uninstalls the app
+ *
+ * We don't need to manually do anything here because any children
+ * are automatically removed upon the removal of the parent.
+ *
+ * Only time to do anything here is when you need to notify
+ * the remote end. And even then you're discouraged from removing
+ * the children manually.
+ */
+def uninstalled() {
+}
+
+/**
+ * If user has selected devices, will start monitoring devices
+ * for changes (new address, port, etc...)
+ */
+def initialize() {
+    log.trace "initialize()"
+    state.subscribe = false
+    if (selecteddevice) {
+        addDevice()
+        refreshDevices()
+        subscribeNetworkEvents(true)
+    }
+}
+
+/**
+ * Adds the child devices based on the user's selection
+ *
+ * Uses selecteddevice defined in the deviceDiscovery() page
+ */
+def addDevice(){
+    def devices = getVerifiedDevices()
+    def devlist
+    log.trace "Adding childs"
+
+    // If only one device is selected, we don't get a list (when using simulator)
+    if (!(selecteddevice instanceof List)) {
+        devlist = [selecteddevice]
+    } else {
+        devlist = selecteddevice
+    }
+
+    log.trace "These are being installed: ${devlist}"
+
+    devlist.each { dni ->
+        def d = getChildDevice(dni)
+        if(!d) {
+            def newDevice = devices.find { (it.value.mac) == dni }
+            def deviceName = newDevice?.value.name
+            if (!deviceName)
+                deviceName = getDeviceName() + "[${newDevice?.value.name}]"
+            d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
+            d.boseSetDeviceID(newDevice.value.deviceID)
+            log.trace "Created ${d.displayName} with id $dni"
+        } else {
+            log.trace "${d.displayName} with id $dni already exists"
+        }
+    }
+}
+
+/**
+ * Resolves a DeviceNetworkId to an address. Primarily used by children
+ *
+ * @param dni Device Network id
+ * @return address or null
+ */
+def resolveDNI2Address(dni) {
+    def device = getVerifiedDevices().find { (it.value.mac) == dni }
+    if (device) {
+        return convertHexToIP(device.value.networkAddress)
+    }
+    return null
+}
+
+/**
+ * Joins a child to the "Play Everywhere" zone
+ *
+ * @param child The speaker joining the zone
+ * @return A list of maps with POST data
+ */
+def boseZoneJoin(child) {
+    log = child.log // So we can debug this function
+
+    def results = []
+    def result = [:]
+
+    // Find the master (if any)
+    def server = getChildDevices().find{ it.boseGetZone() == "server" }
+
+    if (server) {
+        log.debug "boseJoinZone() We have a server already, so lets add the new speaker"
+        child.boseSetZone("client")
+
+        result['endpoint'] = "/setZone"
+        result['host'] = server.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${server.boseGetDeviceID()}\" senderIPAddress=\"${server.getDeviceIP()}\">"
+        getChildDevices().each{ it ->
+            log.trace "child: " + child
+            log.trace "zone : " + it.boseGetZone()
+            if (it.boseGetZone() || it.boseGetDeviceID() == child.boseGetDeviceID())
+                result['body'] = result['body'] + "<member ipaddress=\"${it.getDeviceIP()}\">${it.boseGetDeviceID()}</member>"
+        }
+        result['body'] = result['body'] + '</zone>'
+    } else {
+        log.debug "boseJoinZone() No server, add it!"
+        result['endpoint'] = "/setZone"
+        result['host'] = child.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${child.boseGetDeviceID()}\" senderIPAddress=\"${child.getDeviceIP()}\">"
+        result['body'] = result['body'] + "<member ipaddress=\"${child.getDeviceIP()}\">${child.boseGetDeviceID()}</member>"
+        result['body'] = result['body'] + '</zone>'
+        child.boseSetZone("server")
+    }
+    results << result
+    return results
+}
+
+def boseZoneReset() {
+    getChildDevices().each{ it.boseSetZone(null) }
+}
+
+def boseZoneHasMaster() {
+    return getChildDevices().find{ it.boseGetZone() == "server" } != null
+}
+
+/**
+ * Removes a speaker from the play everywhere zone.
+ *
+ * @param child Which speaker is leaving
+ * @return a list of maps with POST data
+ */
+def boseZoneLeave(child) {
+    log = child.log // So we can debug this function
+
+    def results = []
+    def result = [:]
+
+    // First, tag us as a non-member
+    child.boseSetZone(null)
+
+    // Find the master (if any)
+    def server = getChildDevices().find{ it.boseGetZone() == "server" }
+
+    if (server && server.boseGetDeviceID() != child.boseGetDeviceID()) {
+        log.debug "boseLeaveZone() We have a server, so tell him we're leaving"
+        result['endpoint'] = "/removeZoneSlave"
+        result['host'] = server.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${server.boseGetDeviceID()}\" senderIPAddress=\"${server.getDeviceIP()}\">"
+        result['body'] = result['body'] + "<member ipaddress=\"${child.getDeviceIP()}\">${child.boseGetDeviceID()}</member>"
+        result['body'] = result['body'] + '</zone>'
+        results << result
+    } else {
+        log.debug "boseLeaveZone() No server, then...uhm, we probably were it!"
+        // Dismantle the entire thing, first send this to master
+        result['endpoint'] = "/removeZoneSlave"
+        result['host'] = child.getDeviceIP() + ":8090"
+        result['body'] = "<zone master=\"${child.boseGetDeviceID()}\" senderIPAddress=\"${child.getDeviceIP()}\">"
+        getChildDevices().each{ dev ->
+            if (dev.boseGetZone() || dev.boseGetDeviceID() == child.boseGetDeviceID())
+                result['body'] = result['body'] + "<member ipaddress=\"${dev.getDeviceIP()}\">${dev.boseGetDeviceID()}</member>"
+        }
+        result['body'] = result['body'] + '</zone>'
+        results << result
+
+        // Also issue this to each individual client
+        getChildDevices().each{ dev ->
+            if (dev.boseGetZone() && dev.boseGetDeviceID() != child.boseGetDeviceID()) {
+                log.trace "Additional device: " + dev
+                result['host'] = dev.getDeviceIP() + ":8090"
+                results << result
+            }
+        }
+    }
+
+    return results
+}
+
+/**
+ * Define our XML parsers
+ *
+ * @return mapping of root-node <-> parser function
+ */
+def getParsers() {
+    [
+        "root" : "parseDESC",
+        "info" : "parseINFO"
+    ]
+}
+
+/**
+ * Called when location has changed, contains information from
+ * network transactions. See deviceDiscovery() for where it is
+ * registered.
+ *
+ * @param evt Holds event information
+ */
+def onLocation(evt) {
+    // Convert the event into something we can use
+    def lanEvent = parseLanMessage(evt.description, true)
+    lanEvent << ["hub":evt?.hubId]
+
+    // Determine what we need to do...
+    if (lanEvent?.ssdpTerm?.contains(getDeviceType()) &&
+        (getUSNQualifier() == null ||
+         lanEvent?.ssdpUSN?.contains(getUSNQualifier())
+        )
+       )
+    {
+        parseSSDP(lanEvent)
+    }
+    else if (
+        lanEvent.headers && lanEvent.body &&
+        lanEvent.headers."content-type".contains("xml")
+        )
+    {
+        def parsers = getParsers()
+        def xmlData = new XmlSlurper().parseText(lanEvent.body)
+
+        // Let each parser take a stab at it
+        parsers.each { node,func ->
+            if (xmlData.name() == node)
+                "$func"(xmlData)
+        }
+    }
+}
+
+/**
+ * Handles SSDP description file.
+ *
+ * @param xmlData
+ */
+private def parseDESC(xmlData) {
+    log.info "parseDESC()"
+
+    def devicetype = getDeviceType().toLowerCase()
+    def devicetxml = body.device.deviceType.text().toLowerCase()
+
+    // Make sure it's the type we want
+    if (devicetxml == devicetype) {
+        def devices = getDevices()
+        def device = devices.find {it?.key?.contains(xmlData?.device?.UDN?.text())}
+        if (device && !device.value?.verified) {
+            // Unlike regular DESC, we cannot trust this just yet, parseINFO() decides all
+            device.value << [name:xmlData?.device?.friendlyName?.text(),model:xmlData?.device?.modelName?.text(), serialNumber:xmlData?.device?.serialNum?.text()]
+        } else {
+            log.error "parseDESC(): The xml file returned a device that didn't exist"
+        }
+    }
+}
+
+/**
+ * Handle BOSE <info></info> result. This is an alternative to
+ * using the SSDP description standard. Some of the speakers do
+ * not support SSDP description, so we need this as well.
+ *
+ * @param xmlData
+ */
+private def parseINFO(xmlData) {
+    log.info "parseINFO()"
+    def devicetype = getDeviceType().toLowerCase()
+
+    def deviceID = xmlData.attributes()['deviceID']
+    def device = getDevices().find {it?.key?.contains(deviceID)}
+    if (device && !device.value?.verified) {
+        device.value << [name:xmlData?.name?.text(),model:xmlData?.type?.text(), serialNumber:xmlData?.serialNumber?.text(), "deviceID":deviceID, verified: true]
+    }
+}
+
+/**
+ * Handles SSDP discovery messages and adds them to the list
+ * of discovered devices. If it already exists, it will update
+ * the port and location (in case it was moved).
+ *
+ * @param lanEvent
+ */
+def parseSSDP(lanEvent) {
+    //SSDP DISCOVERY EVENTS
+    def USN = lanEvent.ssdpUSN.toString()
+    def devices = getDevices()
+
+    if (!(devices."${USN}")) {
+        //device does not exist
+        log.trace "parseSDDP() Adding Device \"${USN}\" to known list"
+        devices << ["${USN}":lanEvent]
+    } else {
+        // update the values
+        def d = devices."${USN}"
+        if (d.networkAddress != lanEvent.networkAddress || d.deviceAddress != lanEvent.deviceAddress) {
+            log.trace "parseSSDP() Updating device location (ip & port)"
+            d.networkAddress = lanEvent.networkAddress
+            d.deviceAddress = lanEvent.deviceAddress
+        }
+    }
+}
+
+/**
+ * Generates a Map object which can be used with a preference page
+ * to represent a list of devices detected and verified.
+ *
+ * @return Map with zero or more devices
+ */
+Map getSelectableDevice() {
+    def devices = getVerifiedDevices()
+    def map = [:]
+    devices.each {
+        def value = "${it.value.name}"
+        def key = it.value.mac
+        map["${key}"] = value
+    }
+    map
+}
+
+/**
+ * Starts the refresh loop, making sure to keep us up-to-date with changes
+ *
+ */
+private refreshDevices() {
+    discoverDevices()
+    verifyDevices()
+    runIn(300, "refreshDevices")
+}
+
+/**
+ * Starts a subscription for network events
+ *
+ * @param force If true, will unsubscribe and subscribe if necessary (Optional, default false)
+ */
+private subscribeNetworkEvents(force=false) {
+    if (force) {
+        unsubscribe()
+        state.subscribe = false
+    }
+
+    if(!state.subscribe) {
+        subscribe(location, null, onLocation, [filterEvents:false])
+        state.subscribe = true
+    }
+}
+
+/**
+ * Issues a SSDP M-SEARCH over the LAN for a specific type (see getDeviceType())
+ */
+private discoverDevices() {
+    log.trace "discoverDevice() Issuing SSDP request"
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery ${getDeviceType()}", physicalgraph.device.Protocol.LAN))
+}
+
+/**
+ * Walks through the list of unverified devices and issues a verification
+ * request for each of them (basically calling verifyDevice() per unverified)
+ */
+private verifyDevices() {
+    def devices = getDevices().findAll { it?.value?.verified != true }
+
+    devices.each {
+        verifyDevice(
+            it?.value?.mac,
+            convertHexToIP(it?.value?.networkAddress),
+            convertHexToInt(it?.value?.deviceAddress),
+            it?.value?.ssdpPath
+        )
+    }
+}
+
+/**
+ * Verify the device, in this case, we need to obtain the info block which
+ * holds information such as the actual mac to use in certain scenarios.
+ *
+ * Without this mac (henceforth referred to as deviceID), we can't do multi-speaker
+ * functions.
+ *
+ * @param deviceNetworkId The DNI of the device
+ * @param ip The address of the device on the network (not the same as DNI)
+ * @param port The port to use (0 will be treated as invalid and will use 80)
+ * @param devicessdpPath The URL path (for example, /desc)
+ *
+ * @note Result is captured in locationHandler()
+ */
+private verifyDevice(String deviceNetworkId, String ip, int port, String devicessdpPath) {
+    if(ip) {
+        def address = ip + ":8090"
+        sendHubCommand(new physicalgraph.device.HubAction([
+            method: "GET",
+            path: "/info",
+            headers: [
+                HOST: address,
+            ]]))
+    } else {
+        log.warn("verifyDevice() IP address was empty")
+    }
+}
+
+/**
+ * Returns an array of devices which have been verified
+ *
+ * @return array of verified devices
+ */
+def getVerifiedDevices() {
+    getDevices().findAll{ it?.value?.verified == true }
+}
+
+/**
+ * Returns all discovered devices or an empty array if none
+ *
+ * @return array of devices
+ */
+def getDevices() {
+    state.devices = state.devices ?: [:]
+}
+
+/**
+ * Converts a hexadecimal string to an integer
+ *
+ * @param hex The string with a hexadecimal value
+ * @return An integer
+ */
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+/**
+ * Converts an IP address represented as 0xAABBCCDD to AAA.BBB.CCC.DDD
+ *
+ * @param hex Address represented in hex
+ * @return String containing normal IPv4 dot notation
+ */
+private String convertHexToIP(hex) {
+    if (hex)
+        [convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+    else
+        hex
+}
+
+/**
+ * Tests if this setup can support SmarthThing Labs items
+ *
+ * @return true if it supports it.
+ */
+private Boolean canInstallLabs()
+{
+    return hasAllHubsOver("000.011.00603")
+}
+
+/**
+ * Tests if the firmwares on all hubs owned by user match or exceed the
+ * provided version number.
+ *
+ * @param desiredFirmware The version that must match or exceed
+ * @return true if hub has same or newer
+ */
+private Boolean hasAllHubsOver(String desiredFirmware)
+{
+    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
+}
+
+/**
+ * Creates a list of firmware version for every hub the user has
+ *
+ * @return List of firmwares
+ */
+private List getRealHubFirmwareVersions()
+{
+    return location.hubs*.firmwareVersionString.findAll { it }
+}

smartapps/smartthings/carpool-notifier.src/carpool-notifier.groovy

@@ -30,7 +30,7 @@ definition(
     name: "Carpool Notifier",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "This SmartApp is designed to send notifications to your carpooling buddies when you arrive to pick them up. What separates this SmartApp from other notification SmartApps is that it will only send a notification if your carpool buddy is not with you. If the person you are picking up is present, and has been for 5 minutes or more, they will get a notification when you become present.",
+    description: "Send notifications to your carpooling buddies when you arrive to pick them up. If the person you are picking up is home, and has been for 5 minutes or more, they will get a notification when you arrive.",
     category: "Green Living",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Family/App-IMadeIt.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Family/App-IMadeIt@2x.png"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -27,7 +27,7 @@ definition(
 	name: "Gentle Wake Up",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Gentle Wake Up dims your lights slowly, allowing you to wake up more naturally. Once your lights have finished dimming, optionally turn on more things or send yourself a text for a more gentle nudge into the waking world (you may want to set your normal alarm as a backup plan).",
+	description: "Dim your lights up slowly, allowing you to wake up more naturally.",
 	category: "Health & Wellness",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/HealthAndWellness/App-SleepyTime.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/HealthAndWellness/App-SleepyTime@2x.png"

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -64,10 +64,14 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }    
+
+	subscribe(location, null, locationHandler, [filterEvents:false])
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -94,11 +98,20 @@ def bridgeLinking()
 
 	def nextPage = ""
 	def title = "Linking with your Hue"
-	def paragraphText = "Press the button on your Hue Bridge to setup a link."
+    def paragraphText
+    def hueimage = null
+	if (selectedHue) {
+		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
+    } else {
+    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
+    }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
-		title = "Success! - click 'Next'"
+		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -106,30 +119,39 @@ def bridgeLinking()
 	}
 
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
-		section("Button Press") {
+		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
 
-def bulbDiscovery()
-{
+def bulbDiscovery() {
 	int bulbRefreshCount = !state.bulbRefreshCount ? 0 : state.bulbRefreshCount as int
 	state.bulbRefreshCount = bulbRefreshCount + 1
 	def refreshInterval = 3
-
-	def options = bulbsDiscovered() ?: []
-	def numFound = options.size() ?: 0
-
+	state.inBulbDiscovery = true
+	def bridge = null
+	if (selectedHue) {
+        bridge = getChildDevice(selectedHue)
+        subscribe(bridge, "bulbList", bulbListData)
+	}
+    state.bridgeRefreshCount = 0
+	def bulboptions = bulbsDiscovered() ?: [:]
+	def numFound = bulboptions.size() ?: 0
+    if (numFound == 0)
+    	app.updateSetting("selectedBulbs", "") 
+        
 	if((bulbRefreshCount % 3) == 0) {
 		discoverHueBulbs()
 	}
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:options
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {
+		section {				
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -194,24 +216,29 @@ Map bridgesDiscovered() {
 
 Map bulbsDiscovered() {
 	def bulbs =  getHueBulbs()
-	def map = [:]
+	def bulbmap = [:]
 	if (bulbs instanceof java.util.Map) {
 		bulbs.each {
-			def value = "${it?.value?.name}"
-			def key = app.id +"/"+ it?.value?.id
-			map["${key}"] = value
+			def value = "${it.value.name}"
+			def key = app.id +"/"+ it.value.id
+			bulbmap["${key}"] = value
 		}
 	} else { //backwards compatable
 		bulbs.each {
-			def value = "${it?.name}"
-			def key = app.id +"/"+ it?.id
-			map["${key}"] = value
+			def value = "${it.name}"
+			def key = app.id +"/"+ it.id
+            logg += "$value - $key, "
+			bulbmap["${key}"] = value
 		}
 	}
-	map
+	return bulbmap
 }
 
-def getHueBulbs() {
+def bulbListData(evt) {
+	state.bulbs = evt.jsonData
+}
+
+Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
 
@@ -231,24 +258,19 @@ def installed() {
 def updated() {
 	log.trace "Updated with settings: ${settings}"
     unschedule()
-	unsubscribe()
+	unsubscribe() 
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"
-	state.subscribe = false
-	state.bridgeSelectedOverride = false
-	def bridge = null
-
+	log.debug "Initializing"  
+    unsubscribe(bridge)
+    state.inBulbDiscovery = false
+    state.bridgeRefreshCount = 0
+    state.bulbRefreshCount = 0
 	if (selectedHue) {
-		addBridge()
-        bridge = getChildDevice(selectedHue)
-        subscribe(bridge, "bulbList", bulbListHandler)
-	}
-
-	if (selectedBulbs) {
-		addBulbs()
+   		addBridge()
+        addBulbs()
         doDeviceSync()
         runEvery5Minutes("doDeviceSync")
 	}
@@ -263,27 +285,34 @@ def manualRefresh() {
 
 def uninstalled(){
 	state.bridges = [:]
-    state.subscribe = false
+    state.username = null
 }
 
 // Handles events to add new bulbs
-def bulbListHandler(evt) {
-	def bulbs = [:]
-	log.trace "Adding bulbs to state..."
-	state.bridgeProcessedLightList = true
-	evt.jsonData.each { k,v ->
-		log.trace "$k: $v"
-		if (v instanceof Map) {
-			bulbs[k] = [id: k, name: v.name, type: v.type, hub:evt.value]
-		}
-	}
-	state.bulbs = bulbs
-	log.info "${bulbs.size()} bulbs found"
+def bulbListHandler(hub, data = "") {
+	def msg = "Bulbs list not processed. Only while in settings menu."
+    def bulbs = [:]
+	if (state.inBulbDiscovery) {       
+        def logg = ""
+        log.trace "Adding bulbs to state..."
+        state.bridgeProcessedLightList = true
+        def object = new groovy.json.JsonSlurper().parseText(data)   
+        object.each { k,v ->
+            if (v instanceof Map) 
+                bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
+        }
+    }  
+    def bridge = null
+	if (selectedHue) 
+        bridge = getChildDevice(selectedHue)
+    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+    msg = "${bulbs.size()} bulbs found. ${bulbs}"
+	return msg
 }
 
 def addBulbs() {
 	def bulbs = getHueBulbs()
-	selectedBulbs.each { dni ->
+	selectedBulbs?.each { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
 			def newHueBulb
@@ -294,7 +323,7 @@ def addBulbs() {
 				} else {
 					d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
 				}
-			} else {
+			} else { 
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -322,7 +351,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true
+            def newbridge = true 
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -332,22 +361,27 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false
+                        newbridge = false 
                     }
-                }
-            }
+                }    
+            }  
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
  				if (vbridge.value.ip && vbridge.value.port) {
-                	if (vbridge.value.ip.contains("."))
+                	if (vbridge.value.ip.contains(".")) {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
-                    else
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-				} else
+                        childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
+                    } else {
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                        childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
+                    }    
+				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
+                    childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
+                }    
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -355,7 +389,6 @@ def addBridge() {
 	}
 }
 
-
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -397,8 +430,11 @@ def locationHandler(evt) {
                         }
                     }
                 }
-            } else {
-            	networkAddress = d.latestState('networkAddress').stringValue
+			} else {
+            	if (d.getDeviceDataByName("networkAddress"))
+                	networkAddress = d.getDeviceDataByName("networkAddress")
+            	else
+                	networkAddress = d.latestState('networkAddress').stringValue
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -406,7 +442,8 @@ def locationHandler(evt) {
                     dstate.port = port
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
-            	}
+                    d.updateDataValue("networkAddress", host)
+            	} 
             }
 		}
 	}
@@ -454,17 +491,13 @@ def locationHandler(evt) {
 
 def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
-
-	//shrink the large bulb lists
 	convertBulbListToMap()
-
 	poll()
-
-	if(!state.subscribe) {
+    try {
 		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
-
+    } catch (all) {
+    	log.trace "Subscription already exist"
+ 	}
 	discoverBridges()
 }
 
@@ -473,44 +506,49 @@ def doDeviceSync(){
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description)
+	def parsedEvent = parseLanMessage(description) 
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
-		if (headerString?.contains("json")) {
-            def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
-            if (body instanceof java.util.HashMap)
-            { //poll response
+        def bodyString = parsedEvent.body.toString()
+		if (headerString?.contains("json")) { 
+        	def body
+        	try {
+            	body = new groovy.json.JsonSlurper().parseText(bodyString)
+            } catch (all) {
+            	log.warn "Parsing Body failed - trying again..."
+                poll()
+            }
+            if (body instanceof java.util.HashMap) { 
+            	//poll response
                 def bulbs = getChildDevices()
-                //for each bulb
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
                     if (d) {
                         if (bulb.value.state?.reachable) {
-                                sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
-                                sendEvent(d.deviceNetworkId, [name: "level", value: Math.round(bulb.value.state.bri * 100 / 255)])
-                                if (bulb.value.state.sat) {
-                                    def hue = Math.min(Math.round(bulb.value.state.hue * 100 / 65535), 65535) as int
-                                    def sat = Math.round(bulb.value.state.sat * 100 / 255) as int
-                                    def hex = colorUtil.hslToHex(hue, sat)
-                                    sendEvent(d.deviceNetworkId, [name: "color", value: hex])
-                                    sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                    sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
-                                }
-                            } else {
-                                sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                                sendEvent(d.deviceNetworkId, [name: "level", value: 100])
-                                if (bulb.value.state.sat) {
-                                    def hue = 23
-                                    def sat = 56
-                                    def hex = colorUtil.hslToHex(23, 56)
-                                    sendEvent(d.deviceNetworkId, [name: "color", value: hex])
-                                    sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                    sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
-                                }
-                         }
+                            sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
+                            sendEvent(d.deviceNetworkId, [name: "level", value: Math.round(bulb.value.state.bri * 100 / 255)])
+                            if (bulb.value.state.sat) {
+                                def hue = Math.min(Math.round(bulb.value.state.hue * 100 / 65535), 65535) as int
+                                def sat = Math.round(bulb.value.state.sat * 100 / 255) as int
+                                def hex = colorUtil.hslToHex(hue, sat)
+                                sendEvent(d.deviceNetworkId, [name: "color", value: hex])
+                                sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
+                        } else {
+                            sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            if (bulb.value.state.sat) {
+                                def hue = 23
+                                def sat = 56
+                                def hex = colorUtil.hslToHex(23, 56)
+                                sendEvent(d.deviceNetworkId, [name: "color", value: hex])
+                                sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
+                            }    
+                        }
                     }
-
-                }
+                }     
             }
             else
             { //put response
@@ -559,25 +597,25 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}
+    	}        
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
 	}
 }
 
-def on(childDevice, transition = 4) {
+def on(childDevice, transition_deprecated = 0) {
 	log.debug "Executing 'on'"
-	// Assume bulb is off if no current state is found for level to avoid bulbs getting stuck in off after initial discovery
-    def percent = childDevice.device?.currentValue("level") as Integer ?: 0
+    def percent = childDevice.device?.currentValue("level") as Integer
 	def level = Math.min(Math.round(percent * 255 / 100), 255)
-	put("lights/${getId(childDevice)}/state", [bri: level, on: true, transitiontime: transition])
+	put("lights/${getId(childDevice)}/state", [bri: level, on: true])
     return "level: $percent"
 }
 
-def off(childDevice, transition = 4) {
+def off(childDevice, transition_deprecated = 0) {
 	log.debug "Executing 'off'"
-	put("lights/${getId(childDevice)}/state", [on: false, transitiontime: transition])
+	put("lights/${getId(childDevice)}/state", [on: false])
+    return "level: 0"
 }
 
 def setLevel(childDevice, percent) {
@@ -598,19 +636,21 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColor(childDevice, color, alert = "none", transition = 4) {
-	log.debug "Executing 'setColor($color)'"
-	def hue = Math.min(Math.round(color.hue * 65535 / 100), 65535)
-	def sat = Math.min(Math.round(color.saturation * 255 / 100), 255)
+def setColor(childDevice, huesettings, alert_deprecated = "", transition_deprecated = 0) {
+	log.debug "Executing 'setColor($huesettings)'"
+	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
+    def alert = huesettings.alert ? huesettings.alert : "none"
+    def transition = huesettings.transition ? huesettings.transition : 4
 
 	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
-	if (color.level != null) {
-		value.bri = Math.min(Math.round(color.level * 255 / 100), 255)
+	if (huesettings.level != null) {
+		value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
 		value.on = value.bri > 0
 	}
 
-	if (color.switch) {
-		value.on = color.switch == "on"
+	if (huesettings.switch) {
+		value.on = huesettings.switch == "on"
 	}
 
 	log.debug "sending command $value"
@@ -640,15 +680,19 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-	log.debug "GET: $host$uri"
-	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+    try {
+		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
+	} catch (all) {
+        log.warn "Parsing Body failed - trying again..."
+        doDeviceSync()
+    }
 }
 
 private put(path, body) {
-	def host = getBridgeIP()
+	def host = getBridgeIP()	
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -668,12 +712,21 @@ ${bodyJSON}
 private getBridgeIP() {
 	def host = null
 	if (selectedHue) {
-        def d = getChildDevice(dni)
-    	if (d)
-        	host = d.latestState('networkAddress').stringValue
+        def d = getChildDevice(selectedHue)
+    	if (d) {
+        	if (d.getDeviceDataByName("networkAddress"))
+            	host =  d.getDeviceDataByName("networkAddress")
+            else
+        		host = d.latestState('networkAddress').stringValue
+        }    
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
+            if (!bridge) { 
+            	//failed because mac address sent from hub is wrong and doesn't match the hue's real mac address and serial number
+                //in this case we will look up the bridge by comparing the incorrect mac addresses
+            	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
+            }
             if (bridge?.ip && bridge?.port) {
             	if (bridge?.ip.contains("."))
             		host = "${bridge?.ip}:${bridge?.port}"
@@ -681,9 +734,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }
+        }    
         log.trace "Bridge: $selectedHue - Host: $host"
-    }
+    }    
     return host
 }
 

smartapps/smartthings/laundry-monitor-using-power-meter.src/laundry-monitor-using-power-meter.groovy

@@ -1,128 +0,0 @@
-/**
- *  Laundry Monitor Using Power Meter
- *
- *  Author: Daniel De Leo
- *
- *  Sends a message and (optionally) turns on or blinks a light to indicate that laundry is done.
- *  This is a modification of the SmartThings Laundry Monitor Template App. This app uses a power meter
- *  to determine your laundry status instead of an accelerometer. 
- *
- *  Date: 2013-02-21
- */
-
-definition (
-	name: "Laundry Monitor Using Power Meter",
-	namespace: "danieldeleo",
-	author: "Daniel De Leo",
-	description: "Sends a message and (optionally) turns on or blinks a light to indicate that laundry is done.",
-	category: "Convenience",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/FunAndSocial/App-HotTubTuner.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/FunAndSocial/App-HotTubTuner%402x.png"
-)
-
-preferences {
-	section("Tell me when this washer/dryer has stopped..."){
-		input(name: "meter", type: "capability.powerMeter", title: "When This Power Meter...", required: true, multiple: false)
-	}
-	section("Via a push notification and/or an SMS message"){
-        input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
-        input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"], defaultValue: "No"
-	}
-	section("And by turning on these lights (optional)") {
-		input "switches", "capability.switch", required: false, multiple: true, title: "Which lights?"
-		input "lightMode", "enum", options: ["Flash Lights", "Turn On Lights"], required: false, defaultValue: "Flash Lights", title: "Action?"
-	}
-}
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	subscribe(meter, "power", meterHandler)
-}
-
-def meterHandler(evt) {
-    def meterValue = evt.value as double
-	if(meterValue == 0 && state.running) {
-    	// if meterValue is at 0 Watts and the state is running,
-        // this means washer/dryer is either done or in a soak cycle
-    	state.running = false
-        def msg = "${meter.displayName} is finished"
-
-        if(phone) {// Send SMS message if phone number provided
-            sendSms phone, msg
-        }
-        else {// Send Push Notification if no phone number provided
-            sendPush msg
-        }
-        if(pushAndPhone == "Yes" && phone) {//Send both Push and SMS
-            sendPush msg
-        }
-
-        if (switches) {
-            if (lightMode?.equals("Turn On Lights")) {
-                switches.on()
-            }
-            else {
-                flashLights()
-            }
-        }
-    }
-    else if(meterValue > 10 && !state.running) {
-    	// if meterValue is greater than 10Watts and the
-        // previous read was 0, this means the machine is 
-        // now running
-        state.running = true
-    }
-}
-
-private flashLights() {
-	def doFlash = true
-	def onFor = onFor ?: 2000
-	def offFor = offFor ?: 2000
-	def numFlashes = numFlashes ?: 3
-
-	log.debug "LAST ACTIVATED IS: ${state.lastActivated}"
-	if (state.lastActivated) {
-		def elapsed = now() - state.lastActivated
-		def sequenceTime = (numFlashes + 1) * (onFor + offFor)
-		doFlash = elapsed > sequenceTime
-		log.debug "DO FLASH: $doFlash, ELAPSED: $elapsed, LAST ACTIVATED: ${state.lastActivated}"
-	}
-
-	if (doFlash) {
-		log.debug "FLASHING $numFlashes times"
-		state.lastActivated = now()
-		log.debug "LAST ACTIVATED SET TO: ${state.lastActivated}"
-		def initialActionOn = switches.collect{it.currentSwitch != "on"}
-		def delay = 1L
-		numFlashes.times {
-			log.trace "Switch on after  $delay msec"
-			switches.eachWithIndex {s, i ->
-				if (initialActionOn[i]) {
-					s.on(delay: delay)
-				}
-				else {
-					s.off(delay:delay)
-				}
-			}
-			delay += onFor
-			log.trace "Switch off after $delay msec"
-			switches.eachWithIndex {s, i ->
-				if (initialActionOn[i]) {
-					s.off(delay: delay)
-				}
-				else {
-					s.on(delay:delay)
-				}
-			}
-			delay += offFor
-		}
-	}
-}

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -0,0 +1,394 @@
+/**
+ *  LIFX
+ *
+ *  Copyright 2015 LIFX
+ *
+ */
+definition(
+	name: "LIFX (Connect)",
+	namespace: "smartthings",
+	author: "LIFX",
+	description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+	category: "Convenience",
+	iconUrl: "https://cloud.lifx.com/images/lifx.png",
+	iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+	iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+	oauth: true) {
+		appSetting "clientId"
+		appSetting "clientSecret"
+	}
+
+
+preferences {
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: false)
+}
+
+mappings {
+	path("/receivedToken") { action: [ POST: "oauthReceivedToken", GET: "oauthReceivedToken"] }
+	path("/receiveToken") { action: [ POST: "oauthReceiveToken", GET: "oauthReceiveToken"] }
+	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
+	path("/oauth/callback") { action: [ GET: "oauthCallback" ] }
+	path("/oauth/initialize") { action: [ GET: "oauthInit"] }
+	path("/test") { action: [ GET: "oauthSuccess" ] }
+}
+
+def getServerUrl() { return "https://graph.api.smartthings.com" }
+def apiURL(path = '/') { return "https://api.lifx.com/v1beta1${path}" }
+def buildRedirectUrl(page) {
+	return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
+}
+
+def authPage() {
+	log.debug "authPage"
+	if (!state.lifxAccessToken) {
+		log.debug "no LIFX access token"
+		// This is the SmartThings access token
+		if (!state.accessToken) {
+			log.debug "no access token, create access token"
+			createAccessToken() // predefined method
+		}
+		def description = "Tap to enter LIFX credentials"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}" // this triggers oauthInit() below
+		log.debug "app id: ${app.id}"
+		log.debug "redirect url: ${redirectUrl}"
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:false) {
+			section {
+				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
+				// href(url:buildRedirectUrl("test"), title: "Message test")
+			}
+		}
+	} else {
+		log.debug "have LIFX access token"
+
+		def options = locationOptions() ?: []
+		def count = options.size()
+        def refreshInterval = 3
+
+		return dynamicPage(name:"Credentials", title:"Select devices...", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+			section("Select your location") {
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options
+			}
+		}
+	}
+}
+
+
+// OAuth
+
+def oauthInit() {
+	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote_control:all", response_type: "code" ]
+	log.info("Redirecting user to OAuth setup")
+	redirect(location: "https://cloud.lifx.com/oauth/authorize?${toQueryString(oauthParams)}")
+}
+
+def oauthCallback() {
+	def redirectUrl = null
+	if (params.authQueryString) {
+		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
+	} else {
+		log.warn "No authQueryString"
+	}
+
+	if (state.lifxAccessToken) {
+		log.debug "Access token already exists"
+		success()
+	} else {
+		def code = params.code
+		if (code) {
+			if (code.size() > 6) {
+				// LIFX code
+				log.debug "Exchanging code for access token"
+				oauthReceiveToken(redirectUrl)
+			} else {
+				// Initiate the LIFX OAuth flow.
+				oauthInit()
+			}
+		} else {
+			log.debug "This code should be unreachable"
+			success()
+		}
+	}
+}
+
+def oauthReceiveToken(redirectUrl = null) {
+
+	log.debug "receiveToken - params: ${params}"
+	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
+	def params = [
+			uri: "https://cloud.lifx.com/oauth/token",
+			body: oauthParams,
+			headers: [
+					"User-Agent": "SmartThings Integration"
+			]
+	]
+	httpPost(params) { response ->
+		state.lifxAccessToken = response.data.access_token
+	}
+
+	if (state.lifxAccessToken) {
+		oauthSuccess()
+	} else {
+		oauthFailure()
+	}
+}
+
+def oauthSuccess() {
+	def message = """
+        <p>Your LIFX Account is now connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
+	oauthConnectionStatus(message)
+}
+
+def oauthFailure() {
+	def message = """
+        <p>The connection could not be established!</p>
+        <p>Click 'Done' to return to the menu.</p>
+    """
+	oauthConnectionStatus(message)
+}
+
+def oauthReceivedToken() {
+	def message = """
+        <p>Your LIFX Account is already connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
+	oauthConnectionStatus(message)
+}
+
+def oauthConnectionStatus(message, redirectUrl = null) {
+	def redirectHtml = ""
+	if (redirectUrl) {
+		redirectHtml = """
+            <meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+        """
+	}
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width">
+        <title>SmartThings Connection</title>
+        <style type="text/css">
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 280;
+                padding: 20px;
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 15px;
+            }
+            p {
+                font-size: 1.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                padding: 0 20px;
+                margin-bottom: 0;
+            }
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        ${redirectHtml}
+        </head>
+        <body>
+            <div class="container">
+                <img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+                <p>
+                    ${message}
+                </p>
+            </div>
+        </body>
+        </html>
+    """
+	render contentType: 'text/html', data: html
+}
+
+String toQueryString(Map m) {
+	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}
+
+// App lifecycle hooks
+
+def installed() {
+	enableCallback() // wtf does this do?
+	if (!state.accessToken) {
+		createAccessToken()
+	} else {
+		initialize()
+	}
+	// Check for new devices and remove old ones every 3 hours
+	runEvery3Hours('updateDevices')
+}
+
+// called after settings are changed
+def updated() {
+	enableCallback() // not sure what this does
+	if (!state.accessToken) {
+		createAccessToken()
+	} else {
+		initialize()
+	}
+}
+
+def uninstalled() {
+	log.info("Uninstalling, removing child devices...")
+	unschedule('updateDevices')
+	removeChildDevices(getChildDevices())
+}
+
+private removeChildDevices(devices) {
+	devices.each {
+		deleteChildDevice(it.deviceNetworkId) // 'it' is default
+	}
+}
+
+// called after Done is hit after selecting a Location
+def initialize() {
+	log.debug "initialize"
+	updateDevices()
+}
+
+// Misc
+
+Map apiRequestHeaders() {
+	return ["Authorization": "Bearer ${state.lifxAccessToken}",
+			"Accept": "application/json",
+			"Content-Type": "application/json",
+			"User-Agent": "SmartThings Integration"
+	]
+}
+
+// Requests
+
+def logResponse(response) {
+	log.info("Status: ${response.status}")
+	log.info("Body: ${response.data}")
+}
+
+// API Requests
+// logObject is because log doesn't work if this method is being called from a Device
+def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
+	try {
+		return c()
+	} catch (groovyx.net.http.HttpResponseException e) {
+		options.logObject.error("got error: ${e}, body: ${e.getResponse().getData()}")
+		if (e.statusCode == 401) { // token is expired
+			state.remove("lifxAccessToken")
+			options.logObject.warn "Access token is not valid"
+		}
+		return options.errerReturn
+	} catch (java.net.SocketTimeoutException e) {
+		options.logObject.warn "Connection timed out, not much we can do here"
+		return options.errerReturn
+	}
+}
+
+def apiGET(path) {
+	httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+		logResponse(response)
+		return response
+	}
+}
+
+def apiPUT(path, body = [:]) {
+	log.debug("Beginning API PUT: ${path}, ${body}")
+	httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+		logResponse(response)
+		return response
+	}
+}
+
+def devicesList(selector = '') {
+	logErrors([]) {
+		def resp = apiGET("/lights/${selector}")
+		if (resp.status == 200) {
+			return resp.data
+		} else {
+			log.error("Non-200 from device list call. ${resp.status} ${resp.data}")
+			return []
+		}
+	}
+}
+
+Map locationOptions() {
+
+	def options = [:]
+	def devices = devicesList()
+	devices.each { device ->
+		options[device.location.id] = device.location.name
+	}
+	return options
+}
+
+def devicesInLocation() {
+	return devicesList("location_id:${settings.selectedLocationId}")
+}
+
+// ensures the devices list is up to date
+def updateDevices() {
+	if (!state.devices) {
+		state.devices = [:]
+	}
+	def devices = devicesInLocation()
+	def deviceIds = devices*.id
+	devices.each { device ->
+		def childDevice = getChildDevice(device.id)
+		if (!childDevice) {
+			log.info("Adding device ${device.id}: ${device.capabilities}")
+			def data = [
+					label: device.label,
+					level: sprintf("%f", (device.brightness ?: 1) * 100),
+					switch: device.connected ? device.power : "unreachable",
+					colorTemperature: device.color.kelvin
+			]
+			if (device.capabilities.has_color) {
+				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
+				data["hue"] = device.color.hue / 3.6
+				data["saturation"] = device.color.saturation * 100
+				childDevice = addChildDevice("smartthings", "LIFX Color Bulb", device.id, null, data)
+			} else {
+				childDevice = addChildDevice("smartthings", "LIFX White Bulb", device.id, null, data)
+			}
+		}
+	}
+	getChildDevices().findAll { !deviceIds.contains(it.deviceNetworkId) }.each {
+		log.info("Deleting ${it.deviceNetworkId}")
+		deleteChildDevice(it.deviceNetworkId)
+	}
+	runIn(1, 'refreshDevices') // Asynchronously refresh devices so we don't block
+}
+
+def refreshDevices() {
+	log.info("Refreshing all devices...")
+	getChildDevices().each { device ->
+		device.refresh()
+	}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -38,7 +38,7 @@
 definition(
     name: "Logitech Harmony (Connect)",
     namespace: "smartthings",
-    author: "Juan Pablo Risso",
+    author: "SmartThings",
     description: "Allows you to integrate your Logitech Harmony account with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony.png",
@@ -394,7 +394,9 @@ def discovery() {
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
         state.resethub = true
-	}	
+ 	} catch (e) {
+		log.warn "Hostname in certificate didn't match. Please try again later."
+	}	          
     return null
 }
 
@@ -459,7 +461,9 @@ def activity(dni,mode) {
         	msg = ex
             state.aux = 0 
         }
-    } 
+    } catch(Exception ex) {
+    	msg = ex
+    }
     runIn(10, "poll", [overwrite: true])
     return msg
 }
@@ -517,7 +521,9 @@ def poll() {
                 state.remove("HarmonyAccessToken")        
                 return "Harmony Access token has expired"
             }    
-        }
+		} catch(Exception e) {
+        	log.trace e
+		}
 	}        
 }
 
@@ -550,7 +556,9 @@ def getActivityList() {
         	log.trace e
         } catch (java.net.SocketTimeoutException e) {
         	log.trace e
-        }
+		} catch(Exception e) {
+        	log.trace e
+		}
     }    
 	return activity
 }
@@ -565,9 +573,9 @@ def getActivityName(activity,hubId) {
             httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 actname = response.data.data.activities[activity].name
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }
+		}
     }    
 	return actname
 }
@@ -585,9 +593,9 @@ def getActivityId(activity,hubId) {
                 		actid = it.key
                 }   
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }
+		}
     }    
 	return actid
 }
@@ -602,9 +610,9 @@ def getHubName(hubId) {
             httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 hubname = response.data.data.name
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
+		} catch(Exception e) {
         	log.trace e
-        }      
+		}     
     }    
 	return hubname
 }

smartapps/smartthings/mood-cube.src/mood-cube.groovy

@@ -79,12 +79,9 @@ def scenePage(params=[:]) {
 			href "devicePage", title: "Show Device States", params: [sceneId:sceneId], description: "", state: sceneIsDefined(sceneId) ? "complete" : "incomplete"
 		}
 
-		if (sceneId == currentSceneId) {
-			section {
-				href "saveStatesPage", title: "Record Current Device States", params: [sceneId:sceneId], description: ""
-			}
-		}
-
+        section {
+            href "saveStatesPage", title: "Record Current Device States", params: [sceneId:sceneId], description: ""
+        }
 	}
 }
 
@@ -225,7 +222,7 @@ private restoreStates(sceneId) {
 			if (type == "level") {
 				log.debug "${light.displayName} level is '$level'"
 				if (level != null) {
-					light.setLevel(value)
+					light.setLevel(level)
 				}
 			}
 			else if (type == "color") {

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -23,7 +23,7 @@ definition(
     name: "Notify Me When",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Get a push notification or text message when any of a variety of SmartThings is activated.  Supports button push, motion, contact, acceleration, moisture and presence sensors as well as switches.",
+    description: "Receive notifications when anything happens in your home.",
     category: "Convenience",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"

smartapps/smartthings/wattvision-manager.src/wattvision-manager.groovy

@@ -346,18 +346,20 @@ private getSensorJSON(id, key) {
 
 	def sensorUrl = "${wattvisionBaseURL()}/partners/smartthings/sensor_list?api_id=${id}&api_key=${key}"
 
-	httpGet(uri: sensorUrl) { response ->
+    httpGet(uri: sensorUrl) { response ->
 
-		def json = new org.json.JSONObject(response.data)
+		def sensors = [:]
 
-		state.sensors = json
-
-		json.each { sensorId, sensorName ->
+        response.data.each { sensorId, sensorName ->
+        	sensors[sensorId] = sensorName
 			createChild(sensorId, sensorName)
-		}
+        }
+        
+        state.sensors = sensors
 
 		return "success"
 	}
+    
 }
 
 def createChild(sensorId, sensorName) {

smartapps/smartthings/withings-manager.src/withings-manager.groovy

@@ -0,0 +1,775 @@
+/**
+ *  Title: Withings Service Manager
+ * 	Description: Connect Your Withings Devices
+ *
+ *  Author: steve
+ *  Date: 1/9/15
+ *
+ *
+ *  Copyright 2015 steve
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+definition(
+	name: "Withings Manager",
+	namespace: "smartthings",
+	author: "SmartThings",
+	description: "Connect With Withings",
+	category: "",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/withings.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
+	iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
+	oauth: true
+) {
+	appSetting "consumerKey"
+	appSetting "consumerSecret"
+}
+
+// ========================================================
+// PAGES
+// ========================================================
+
+preferences {
+	page(name: "authPage")
+}
+
+def authPage() {
+
+	def installOptions = false
+	def description = "Required (tap to set)"
+	def authState
+
+	if (oauth_token()) {
+		// TODO: Check if it's valid
+		if (true) {
+			description = "Saved (tap to change)"
+			installOptions = true
+			authState = "complete"
+		} else {
+			// Worth differentiating here? (no longer valid vs. non-existent state.externalAuthToken?)
+			description = "Required (tap to set)"
+		}
+	}
+
+
+	dynamicPage(name: "authPage", install: installOptions, uninstall: true) {
+		section {
+
+			if (installOptions) {
+				input(name: "withingsLabel", type: "text", title: "Add a name", description: null, required: true)
+			}
+
+			href url: shortUrl("authenticate"), style: "embedded", required: false, title: "Authenticate with Withings", description: description, state: authState
+		}
+	}
+}
+
+// ========================================================
+// MAPPINGS
+// ========================================================
+
+mappings {
+	path("/authenticate") {
+		action:
+		[
+			GET: "authenticate"
+		]
+	}
+	path("/x") {
+		action:
+		[
+			GET: "exchangeTokenFromWithings"
+		]
+	}
+	path("/n") {
+		action:
+		[POST: "notificationReceived"]
+	}
+
+	path("/test/:action") {
+		action:
+		[GET: "test"]
+	}
+}
+
+def test() {
+	"${params.action}"()
+}
+
+def authenticate() {
+	// do not hit userAuthorizationUrl when the page is executed. It will replace oauth_tokens
+	// instead, redirect through here so we know for sure that the user wants to authenticate
+	// plus, the short-lived tokens that are used during authentication are only valid for 2 minutes
+	// so make sure we give the user as much of that 2 minutes as possible to enter their credentials and deal with network latency
+	log.trace "starting Withings authentication flow"
+	redirect location: userAuthorizationUrl()
+}
+
+def exchangeTokenFromWithings() {
+	// Withings hits us here during the oAuth flow
+//	log.trace "exchangeTokenFromWithings ${params}"
+	atomicState.userid = params.userid // TODO: restructure this for multi-user access
+	exchangeToken()
+}
+
+def notificationReceived() {
+//	log.trace "notificationReceived params: ${params}"
+
+	def notificationParams = [
+		startdate: params.startdate,
+		userid   : params.userid,
+		enddate  : params.enddate,
+	]
+
+	def measures = wGetMeasures(notificationParams)
+	sendMeasureEvents(measures)
+	return [status: 0]
+}
+
+// ========================================================
+// HANDLERS
+// ========================================================
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+//	wRevokeAllNotifications()
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	if (!getChild()) { createChild() }
+	app.updateLabel(withingsLabel)
+	wCreateNotification()
+	backfillMeasures()
+}
+
+// ========================================================
+// CHILD DEVICE
+// ========================================================
+
+private getChild() {
+	def children = childDevices
+	children.size() ? children.first() : null
+}
+
+private void createChild() {
+	def child = addChildDevice("smartthings", "Withings User", userid(), null, [name: app.label, label: withingsLabel])
+	atomicState.child = [dni: child.deviceNetworkId]
+}
+
+// ========================================================
+// URL HELPERS
+// ========================================================
+
+def stBaseUrl() {
+	if (!atomicState.serverUrl) {
+		stToken()
+		atomicState.serverUrl = buildActionUrl("").split(/api\//).first()
+	}
+	return atomicState.serverUrl
+}
+
+def stToken() {
+	atomicState.accessToken ?: createAccessToken()
+}
+
+def shortUrl(path = "", urlParams = [:]) {
+	attachParams("${stBaseUrl()}api/t/${stToken()}/s/${app.id}/${path}", urlParams)
+}
+
+def noTokenUrl(path = "", urlParams = [:]) {
+	attachParams("${stBaseUrl()}api/smartapps/installations/${app.id}/${path}", urlParams)
+}
+
+def attachParams(url, urlParams = [:]) {
+	[url, toQueryString(urlParams)].findAll().join("?")
+}
+
+String toQueryString(Map m = [:]) {
+//	log.trace "toQueryString. URLEncoder will be used on ${m}"
+	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}
+
+// ========================================================
+// WITHINGS MEASURES
+// ========================================================
+
+def unixTime(date = new Date()) {
+	def unixTime = date.time / 1000 as int
+//	log.debug "converting ${date.time} to ${unixTime}"
+	unixTime
+}
+
+def backfillMeasures() {
+//	log.trace "backfillMeasures"
+	def measureParams = [startdate: unixTime(new Date() - 10)]
+	def measures = wGetMeasures(measureParams)
+	sendMeasureEvents(measures)
+}
+
+// this is body measures. // TODO: get activity and others too
+def wGetMeasures(measureParams = [:]) {
+	def baseUrl = "https://wbsapi.withings.net/measure"
+	def urlParams = [
+		action     : "getmeas",
+		userid     : userid(),
+		startdate  : unixTime(new Date() - 5),
+		enddate    : unixTime(),
+		oauth_token: oauth_token()
+	] + measureParams
+	def measureData = fetchDataFromWithings(baseUrl, urlParams)
+//	log.debug "measureData: ${measureData}"
+	measureData.body.measuregrps.collect { parseMeasureGroup(it) }.flatten()
+}
+/*
+[
+	body:[
+		measuregrps:[
+			[
+				category:1, // 1 for real measurements, 2 for user objectives.
+				grpid:310040317,
+				measures:[
+					[
+						unit:0, 	// Power of ten the "value" parameter should be multiplied to to get the real value. Eg : value = 20 and unit=-1 means the value really is 2.0
+						value:60, // Value for the measure in S.I units (kilogram, meters, etc.). Value should be multiplied by 10 to the power of "unit" (see below) to get the real value.
+						type:11   // 1 : Weight (kg), 4 : Height (meter), 5 : Fat Free Mass (kg), 6 : Fat Ratio (%), 8 : Fat Mass Weight (kg), 9 : Diastolic Blood Pressure (mmHg), 10 : Systolic Blood Pressure (mmHg), 11 : Heart Pulse (bpm), 54 : SP02(%)
+					],
+					[
+						unit:-3,
+						value:-1000,
+						type:18
+					]
+				],
+				date:1422750210,
+				attrib:2
+			]
+		],
+		updatetime:1422750227
+	],
+	status:0
+]
+*/
+
+def sendMeasureEvents(measures) {
+//	log.debug "measures: ${measures}"
+	measures.each {
+		if (it.name && it.value) {
+			sendEvent(userid(), it)
+		}
+	}
+}
+
+def parseMeasureGroup(measureGroup) {
+	long time = measureGroup.date // must be long. INT_MAX is too small
+	time *= 1000
+	measureGroup.measures.collect { parseMeasure(it) + [date: new Date(time)] }
+}
+
+def parseMeasure(measure) {
+//	log.debug "parseMeasure($measure)"
+	[
+		name : measureAttribute(measure),
+		value: measureValue(measure)
+	]
+}
+
+def measureValue(measure) {
+	def value = measure.value * 10.power(measure.unit)
+	if (measure.type == 1) { // Weight (kg)
+		value *= 2.20462262 // kg to lbs
+	}
+	value
+}
+
+String measureAttribute(measure) {
+	def attribute = ""
+	switch (measure.type) {
+		case 1: attribute = "weight"; break;
+		case 4: attribute = "height"; break;
+		case 5: attribute = "leanMass"; break;
+		case 6: attribute = "fatRatio"; break;
+		case 8: attribute = "fatMass"; break;
+		case 9: attribute = "diastolicPressure"; break;
+		case 10: attribute = "systolicPressure"; break;
+		case 11: attribute = "heartPulse"; break;
+		case 54: attribute = "SP02"; break;
+	}
+	return attribute
+}
+
+String measureDescription(measure) {
+	def description = ""
+	switch (measure.type) {
+		case 1: description = "Weight (kg)"; break;
+		case 4: description = "Height (meter)"; break;
+		case 5: description = "Fat Free Mass (kg)"; break;
+		case 6: description = "Fat Ratio (%)"; break;
+		case 8: description = "Fat Mass Weight (kg)"; break;
+		case 9: description = "Diastolic Blood Pressure (mmHg)"; break;
+		case 10: description = "Systolic Blood Pressure (mmHg)"; break;
+		case 11: description = "Heart Pulse (bpm)"; break;
+		case 54: description = "SP02(%)"; break;
+	}
+	return description
+}
+
+// ========================================================
+// WITHINGS NOTIFICATIONS
+// ========================================================
+
+def wNotificationBaseUrl() { "https://wbsapi.withings.net/notify" }
+
+def wNotificationCallbackUrl() { shortUrl("n") }
+
+def wGetNotification() {
+	def userId = userid()
+	def url = wNotificationBaseUrl()
+	def params = [
+		action: "subscribe"
+	]
+
+}
+
+// TODO: keep track of notification expiration
+def wCreateNotification() {
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "subscribe",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token(),
+		comment    : "hmm" // TODO: figure out what to do here. spaces seem to break the request
+	]
+
+	fetchDataFromWithings(baseUrl, urlParams)
+}
+
+def wRevokeAllNotifications() {
+	def notifications = wListNotifications()
+	notifications.each {
+		wRevokeNotification([callbackurl: it.callbackurl]) // use the callbackurl Withings has on file
+	}
+}
+
+def wRevokeNotification(notificationParams = [:]) {
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "revoke",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token()
+	] + notificationParams
+
+	fetchDataFromWithings(baseUrl, urlParams)
+}
+
+def wListNotifications() {
+
+	/*
+	{
+		body: {
+			profiles: [
+				{
+					appli: 1,
+					expires: 2147483647,
+					callbackurl: "https://graph.api.smartthings.com/api/t/72ab3e57-5839-4cca-9562-dcc818f83bc9/s/537757a0-c4c8-40ea-8cea-aa283915bbd9/n",
+					comment: "hmm"
+				}
+			]
+		},
+		status: 0
+	}*/
+
+	def baseUrl = wNotificationBaseUrl()
+	def urlParams = [
+		action     : "list",
+		userid     : userid(),
+		callbackurl: wNotificationCallbackUrl(),
+		oauth_token: oauth_token()
+	]
+
+	def notificationData = fetchDataFromWithings(baseUrl, urlParams)
+	notificationData.body.profiles
+}
+
+def defaultOauthParams() {
+	defaultParameterKeys().inject([:]) { keyMap, currentKey ->
+		keyMap[currentKey] = "${currentKey}"()
+		keyMap
+	}
+}
+
+// ========================================================
+// WITHINGS DATA FETCHING
+// ========================================================
+
+def fetchDataFromWithings(baseUrl, urlParams) {
+
+//	log.debug "fetchDataFromWithings(${baseUrl}, ${urlParams})"
+
+	def defaultParams = defaultOauthParams()
+	def paramStrings = buildOauthParams(urlParams + defaultParams)
+//	log.debug "paramStrings: $paramStrings"
+	def url = buildOauthUrl(baseUrl, paramStrings, oauth_token_secret())
+	def json
+//	log.debug "about to make request to ${url}"
+	httpGet(uri: url, headers: ["Content-Type": "application/json"]) { response ->
+		json = new groovy.json.JsonSlurper().parse(response.data)
+	}
+	return json
+}
+
+// ========================================================
+// WITHINGS OAUTH LOGGING
+// ========================================================
+
+def wLogEnabled() { false } // For troubleshooting Oauth flow
+
+void wLog(message = "") {
+	if (!wLogEnabled()) { return }
+	def wLogMessage = atomicState.wLogMessage
+	if (wLogMessage.length()) {
+		wLogMessage += "\n|"
+	}
+	wLogMessage += message
+	atomicState.wLogMessage = wLogMessage
+}
+
+void wLogNew(seedMessage = "") {
+	if (!wLogEnabled()) { return }
+	def olMessage = atomicState.wLogMessage
+	if (oldMessage) {
+		log.debug "purging old wLogMessage: ${olMessage}"
+	}
+	atomicState.wLogMessage = seedMessage
+}
+
+String wLogMessage() {
+	if (!wLogEnabled()) { return }
+	def wLogMessage = atomicState.wLogMessage
+	atomicState.wLogMessage = ""
+	wLogMessage
+}
+
+// ========================================================
+// WITHINGS OAUTH DESCRIPTION
+// >>>>>>	The user opens the authPage for this SmartApp
+// STEP 1 get a token to be used in the url the user taps
+// STEP 2 generate the url to be tapped by the user
+// >>>>>>	The user taps the url and logs in to Withings
+// STEP 3 generate a token to be used for accessing user data
+// STEP 4 access user data
+// ========================================================
+
+// ========================================================
+// WITHINGS OAUTH STEP 1: get an oAuth "request token"
+// ========================================================
+
+def requestTokenUrl() {
+	wLogNew "WITHINGS OAUTH STEP 1: get an oAuth 'request token'"
+
+	def keys = defaultParameterKeys() + "oauth_callback"
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/request_token", paramStrings, "")
+}
+
+// ========================================================
+// WITHINGS OAUTH STEP 2: End-user authorization
+// ========================================================
+
+def userAuthorizationUrl() {
+
+	// get url from Step 1
+	def tokenUrl = requestTokenUrl()
+
+	// collect token from Withings
+	collectTokenFromWithings(tokenUrl)
+
+	wLogNew "WITHINGS OAUTH STEP 2: End-user authorization"
+
+	def keys = defaultParameterKeys() + "oauth_token"
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/authorize", paramStrings, oauth_token_secret())
+}
+
+// ========================================================
+// WITHINGS OAUTH STEP 3: Generating access token
+// ========================================================
+
+def exchangeTokenUrl() {
+	wLogNew "WITHINGS OAUTH STEP 3: Generating access token"
+
+	def keys = defaultParameterKeys() + ["oauth_token", "userid"]
+	def paramStrings = buildOauthParams(keys.sort())
+
+	buildOauthUrl("https://oauth.withings.com/account/access_token", paramStrings, oauth_token_secret())
+}
+
+def exchangeToken() {
+
+	def tokenUrl = exchangeTokenUrl()
+//	log.debug "about to hit ${tokenUrl}"
+
+	try {
+		// replace old token with a long-lived token
+		def token = collectTokenFromWithings(tokenUrl)
+//		log.debug "collected token from Withings: ${token}"
+		renderAction("authorized", "Withings Connection")
+	}
+	catch (Exception e) {
+		log.error e
+		renderAction("notAuthorized", "Withings Connection Failed")
+	}
+}
+
+// ========================================================
+// OAUTH 1.0
+// ========================================================
+
+def defaultParameterKeys() {
+	[
+		"oauth_consumer_key",
+		"oauth_nonce",
+		"oauth_signature_method",
+		"oauth_timestamp",
+		"oauth_version"
+	]
+}
+
+def oauth_consumer_key() { consumerKey }
+
+def oauth_nonce() { nonce() }
+
+def nonce() { UUID.randomUUID().toString().replaceAll("-", "") }
+
+def oauth_signature_method() { "HMAC-SHA1" }
+
+def oauth_timestamp() { (int) (new Date().time / 1000) }
+
+def oauth_version() { 1.0 }
+
+def oauth_callback() { shortUrl("x") }
+
+def oauth_token() { atomicState.wToken?.oauth_token }
+
+def oauth_token_secret() { atomicState.wToken?.oauth_token_secret }
+
+def userid() { atomicState.userid }
+
+String hmac(String oAuthSignatureBaseString, String oAuthSecret) throws java.security.SignatureException {
+	if (!oAuthSecret.contains("&")) { log.warn "Withings requires \"&\" to be included no matter what" }
+	// get an hmac_sha1 key from the raw key bytes
+	def signingKey = new javax.crypto.spec.SecretKeySpec(oAuthSecret.getBytes(), "HmacSHA1")
+	// get an hmac_sha1 Mac instance and initialize with the signing key
+	def mac = javax.crypto.Mac.getInstance("HmacSHA1")
+	mac.init(signingKey)
+	// compute the hmac on input data bytes
+	byte[] rawHmac = mac.doFinal(oAuthSignatureBaseString.getBytes())
+	return org.apache.commons.codec.binary.Base64.encodeBase64String(rawHmac)
+}
+
+Map parseResponseString(String responseString) {
+//	log.debug "parseResponseString: ${responseString}"
+	responseString.split("&").inject([:]) { c, it ->
+		def parts = it.split('=')
+		def k = parts[0]
+		def v = parts[1]
+		c[k] = v
+		return c
+	}
+}
+
+String applyParams(endpoint, oauthParams) { endpoint + "?" + oauthParams.sort().join("&") }
+
+String buildSignature(endpoint, oAuthParams, oAuthSecret) {
+	def oAuthSignatureBaseParts = ["GET", endpoint, oAuthParams.join("&")]
+	def oAuthSignatureBaseString = oAuthSignatureBaseParts.collect { URLEncoder.encode(it) }.join("&")
+	wLog "    ==> oAuth signature base string : \n${oAuthSignatureBaseString}"
+	wLog "    .. applying hmac-sha1 to base string, with secret : ${oAuthSecret} (notice the \"&\")"
+	wLog "    .. base64 encode then url-encode the hmac-sha1 hash"
+	String hmacResult = hmac(oAuthSignatureBaseString, oAuthSecret)
+	def signature = URLEncoder.encode(hmacResult)
+	wLog "    ==> oauth_signature = ${signature}"
+	return signature
+}
+
+List buildOauthParams(List parameterKeys) {
+	wLog "    .. adding oAuth parameters : "
+	def oauthParams = []
+	parameterKeys.each { key ->
+		def value = "${key}"()
+		wLog "        ${key} = ${value}"
+		oauthParams << "${key}=${URLEncoder.encode(value.toString())}"
+	}
+
+	wLog "    .. sorting all request parameters alphabetically "
+	oauthParams.sort()
+}
+
+List buildOauthParams(Map parameters) {
+	wLog "    .. adding oAuth parameters : "
+	def oauthParams = []
+	parameters.each { k, v ->
+		wLog "        ${k} = ${v}"
+		oauthParams << "${k}=${URLEncoder.encode(v.toString())}"
+	}
+
+	wLog "    .. sorting all request parameters alphabetically "
+	oauthParams.sort()
+}
+
+String buildOauthUrl(String endpoint, List parameterStrings, String oAuthTokenSecret) {
+	wLog "Api endpoint : ${endpoint}"
+
+	wLog "Signing request :"
+	def oAuthSecret = "${consumerSecret}&${oAuthTokenSecret}"
+	def signature = buildSignature(endpoint, parameterStrings, oAuthSecret)
+
+	parameterStrings << "oauth_signature=${signature}"
+
+	def finalUrl = applyParams(endpoint, parameterStrings)
+	wLog "Result: ${finalUrl}"
+	if (wLogEnabled()) {
+		log.debug wLogMessage()
+	}
+	return finalUrl
+}
+
+def collectTokenFromWithings(tokenUrl) {
+	// get token from Withings using the url generated in Step 1
+	def tokenString
+	httpGet(uri: tokenUrl) { resp -> // oauth_token=<token_key>&oauth_token_secret=<token_secret>
+		tokenString = resp.data.toString()
+//		log.debug "collectTokenFromWithings: ${tokenString}"
+	}
+	def token = parseResponseString(tokenString)
+	atomicState.wToken = token
+	return token
+}
+
+// ========================================================
+// APP SETTINGS
+// ========================================================
+
+def getConsumerKey() { appSettings.consumerKey }
+
+def getConsumerSecret() { appSettings.consumerSecret }
+
+// figure out how to put this in settings
+def getUserId() { atomicState.wToken?.userid }
+
+// ========================================================
+// HTML rendering
+// ========================================================
+
+def renderAction(action, title = "") {
+	log.debug "renderAction: $action"
+	renderHTML(title) {
+		head { "${action}HtmlHead"() }
+		body { "${action}HtmlBody"() }
+	}
+}
+
+def authorizedHtmlHead() {
+	log.trace "authorizedHtmlHead"
+	"""
+		<style type="text/css">
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				/*width: 560px;
+				padding: 40px;*/
+				/*background: #eee;*/
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+							max-width:20%;
+			}
+			img:nth-child(2) {
+				margin: 0 30px;
+			}
+			p {
+				/*font-size: 1.2em;*/
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				padding: 0 10px;
+				margin-bottom: 0;
+			}
+		/*
+			p:last-child {
+				margin-top: 0px;
+			}
+		*/
+			span {
+				font-family: 'Swiss 721 W01 Light';
+			}
+		</style>
+		"""
+}
+
+def authorizedHtmlBody() {
+	"""
+		<div class="container">
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/withings@2x.png" alt="withings icon" />
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+			<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+			<p>Your Withings scale is now connected to SmartThings!</p>
+			<p>Click 'Done' to finish setup.</p>
+		</div>
+		"""
+}
+
+def notAuthorizedHtmlHead() {
+	log.trace "notAuthorizedHtmlHead"
+	authorizedHtmlHead()
+}
+
+def notAuthorizedHtmlBody() {
+	"""
+		<div class="container">
+			<p>There was an error connecting to SmartThings!</p>
+			<p>Click 'Done' to try again.</p>
+		</div>
+		"""
+}

smartapps/tslagle13/thermostat-mode-director.src/thermostat-mode-director.groovy

@@ -622,7 +622,7 @@ def greyedOutTime(starting, ending){
     }
     result
 }
-
+	
 private anyoneIsHome() {
   def result = false
 
@@ -634,10 +634,10 @@ private anyoneIsHome() {
 
   return result
 }
-
+	
 page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
 			input "starting", "time", title: "Starting (both are required)", required: false 
 			input "ending", "time", title: "Ending (both are required)", required: false 
 		}
-        }
+        }

smartapps/weatherbug/weatherbug-home.src/weatherbug-home.groovy

@@ -0,0 +1,307 @@
+/**
+ *  WeatherBug Home
+ *
+ *  Copyright 2015 WeatherBug
+ *
+ */
+definition(
+    name: "WeatherBug Home",
+    namespace: "WeatherBug",
+    author: "WeatherBug Home",
+    description: "WeatherBug Home",
+    category: "My Apps",
+    iconUrl: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughomemedium.png",
+    iconX2Url: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughomemedium.png",
+    iconX3Url: "http://stg.static.myenergy.enqa.co/apps/wbhc/v2/images/weatherbughome.png",
+    oauth: [displayName: "WeatherBug Home", displayLink: "http://weatherbughome.com/"])
+
+
+preferences {
+        section("Select thermostats") {
+        input "thermostatDevice", "capability.thermostat", multiple: true
+    }
+}
+
+mappings {
+  path("/appInfo") {    action: [      GET: "getAppInfo"    ]  }
+  path("/getLocation") {    action: [      GET: "getLoc"    ]  }
+  path("/currentReport/:id") {    action: [      GET: "getCurrentReport"    ]  }
+  path("/setTemp/:temp/:id") {    action: [      POST: "setTemperature", GET: "setTemperature"    ]  }
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * data from the installed SmartApp, including the location data, and 
+ * a list of the devices that were authorized to be accessed.  The WeatherBug
+ * Home Service will leverage this data to represent the connected devices as well as their
+ * location and associated the data with a WeatherBug user account.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ * @return Location, including id, latitude, longitude, zip code, and name, and the list of devices
+ */
+def getAppInfo() {
+   def devices = thermostatDevice
+   def lat = location.latitude
+   def lon = location.longitude
+   if(!(devices instanceof Collection))
+   {
+     devices = [devices]
+   }
+   return [
+   			Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+   			Result: [ "Devices": devices, 
+   			"Location":[
+            	"Id": location.id, 
+            	"Latitude":lat,
+            	"Longitude":lon,
+            	"ZipCode":location.zipCode,
+            	"Name":location.name
+                ]
+            ]
+         ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * location data from the installed SmartApp.  The WeatherBug
+ * Home Service will leverage this data to associate the location to a WeatherBug Home account
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @return Location, including id, latitude, longitude, zip code, and name
+ */
+def getLoc() {
+   return [
+   		Id: UUID.randomUUID().toString(),
+        Code: 200,
+        ErrorMessage: null,
+        Result: [
+        "Id": location.id, 
+        "Latitude":location.latitude,
+        "Longitude":location.longitude,
+        "ZipCode":location.zipCode,
+        "Name":location.name]
+    ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to retrieve
+ * thermostat data and store it for display to a WeatherBug user.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @param id The id of the device to get data for
+ * @return Thermostat data including temperature, set points, running modes, and operating states
+ */
+def getCurrentReport() {
+	log.debug "device id parameter=" + params.id
+    def unixTime = (int)((new Date().getTime() / 1000))
+    def device = thermostatDevice.find{ it.id == params.id}
+    
+    if(device == null)
+    {
+    	return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 404,
+            ErrorMessage: "Device not found. id=" + params.id,
+            Result: null
+        ]
+    }
+    return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+            Result: [
+                DeviceId: device.id, 
+                LocationId: location.id, 
+                ReportType: 2, 
+                ReportList: [ 
+                    [Key: "Temperature", Value: GetOrDefault(device, "temperature")], 
+                	[Key: "ThermostatSetpoint", Value: GetOrDefault(device, "thermostatSetpoint")],
+                    [Key: "CoolingSetpoint", Value: GetOrDefault(device, "coolingSetpoint")],
+                    [Key: "HeatingSetpoint", Value: GetOrDefault(device, "heatingSetpoint")],
+                    [Key: "ThermostatMode", Value: GetOrDefault(device, "thermostatMode")],
+                    [Key: "ThermostatFanMode", Value: GetOrDefault(device, "thermostatFanMode")],
+                    [Key: "ThermostatOperatingState", Value: GetOrDefault(device, "thermostatOperatingState")]
+                ],
+                UnixTime: unixTime
+            ]
+        ]
+}
+
+/**
+ * This API call will be leveraged by a WeatherBug Home Service to set
+ * the thermostat setpoint.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ *
+ * @param id The id of the device to set
+ * @return Indication of whether the operation succeeded or failed
+ 
+def setTemperature() {
+	log.debug "device id parameter=" + params.id
+	def device = thermostatDevice.find{ it.id == params.id}
+    if(device != null)
+    {
+        def mode = device.latestState('thermostatMode').stringValue
+        def value = params.temp as Integer
+        log.trace "Suggested temperature: $value, $mode"
+        if ( mode == "cool")
+            device.setCoolingSetpoint(value)
+        else if ( mode == "heat")
+            device.setHeatingSetpoint(value)           
+        return [
+        	Id: UUID.randomUUID().toString(),
+            Code: 200,
+            ErrorMessage: null,
+            Result: null
+        ]
+    }
+    return [
+        	Id: UUID.randomUUID().toString(),
+            Code : 404,
+            ErrorMessage: "Device not found. id=" + params.id,
+            Result: null
+        ]
+}
+*/
+
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+/**
+ * The updated event will be pushed to a WeatherBug Home Service to notify the system to take appropriate action.
+ * Data that will be sent includes the list of devices, and location data
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+    log.debug "Updated with state: ${state}"
+	log.debug "Updated with location ${location} ${location.id} ${location.name}"
+    unsubscribe()
+    initialize()
+	def postParams = [
+		uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive/smartapp/update',
+		body:  [ 
+			"Devices": devices, 
+			"Location":[
+				"Id": location.id, 
+				"Latitude":location.latitude,
+				"Longitude":location.longitude,
+				"ZipCode":location.zipCode,
+				"Name":location.name
+			]
+	   ]
+    ]
+    sendToWeatherBug(postParams)
+}
+
+/*
+* Subscribe to changes on the thermostat attributes
+*/
+def initialize() {
+	log.trace "initialize enter"
+    subscribe(thermostatDevice, "heatingSetpoint", pushLatest)
+    subscribe(thermostatDevice, "coolingSetpoint", pushLatest)
+    subscribe(thermostatDevice, "thermostatSetpoint", pushLatest)
+    subscribe(thermostatDevice, "thermostatMode", pushLatest)
+    subscribe(thermostatDevice, "thermostatFanMode", pushLatest)
+    subscribe(thermostatDevice, "thermostatOperatingState", pushLatest)
+    subscribe(thermostatDevice, "temperature", pushLatest)
+}
+
+/**
+ * The uninstall event will be pushed to a WeatherBug Home Service to notify the system to take appropriate action.
+ * Data that will be sent includes the list of devices, and location data
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def uninstalled() {
+	log.trace "uninstall entered"
+    def postParams = [
+    	uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive/smartapp/delete',
+        body:  [ 
+        	"Devices": devices, 
+            "Location":[
+                "Id": location.id, 
+                "Latitude":location.latitude,
+                "Longitude":location.longitude,
+                "ZipCode":location.zipCode,
+                "Name":location.name
+            ]
+       ]
+    ]
+    sendToWeatherBug(postParams)
+}
+
+/**
+ * This method will push the latest thermostat data to the WeatherBug Home Service so it can store
+ * and display the data to the WeatherBug user.  Data pushed includes the thermostat data as well
+ * as location id.
+ * Privacy Policy: http://weatherbughome.com/privacy/
+ */
+def pushLatest(evt) {
+	def unixTime = (int)((new Date().getTime() / 1000))
+    def device = thermostatDevice.find{ it.id == evt.deviceId}
+    def postParams = [
+        uri: 'https://smartthingsrec.api.earthnetworks.com/api/v1/receive',
+        body: [
+        	DeviceId: evt.deviceId, 
+            LocationId: location.id,
+            ReportType: 2, 
+            ReportList: [ 
+        		[Key: "Temperature", Value: GetOrDefault(device, "temperature")], 
+                [Key: "ThermostatSetpoint", Value: GetOrDefault(device, "thermostatSetpoint")],
+        		[Key: "CoolingSetpoint", Value: GetOrDefault(device, "coolingSetpoint")],
+        		[Key: "HeatingSetpoint", Value: GetOrDefault(device, "heatingSetpoint")],
+                [Key: "ThermostatMode", Value: GetOrDefault(device, "thermostatMode")],
+                [Key: "ThermostatFanMode", Value: GetOrDefault(device, "thermostatFanMode")],
+                [Key: "ThermostatOperatingState", Value: GetOrDefault(device, "thermostatOperatingState")]
+        	], 
+            UnixTime: unixTime
+        ]
+    ]
+    log.debug postParams
+    sendToWeatherBug(postParams)
+}
+
+/*
+* This method attempts to get the value of a device attribute, but if an error occurs null is returned
+* @return The device attribute value, or null
+*/
+def GetOrDefault(device, attrib)
+{
+	def val
+ 	try{
+    	val = device.latestValue(attrib)
+    
+    }catch(ex)
+    {
+        log.debug "Failed to get attribute " + attrib + " from device " + device
+        val = null
+    }
+    return val
+}
+
+/*
+* Convenience method that sends data to WeatherBug, logging any exceptions that may occur
+* Privacy Policy: http://weatherbughome.com/privacy/
+*/
+def sendToWeatherBug(postParams)
+{
+ 	try{
+    	log.debug postParams
+        httpPostJson(postParams) { resp ->
+        	resp.headers.each {
+           log.debug "${it.name} : ${it.value}"
+        }
+        log.debug "response contentType: ${resp.contentType}"
+        log.debug "response data: ${resp.data}"
+        }
+        log.debug "Communication with WeatherBug succeeded";
+    
+    }catch(ex)
+    {
+        log.debug "Communication with WeatherBug failed.\n${ex}";
+    }
+}