MSA-753: Sets mode to home when somebody is home, away when everyone is gone and home / night (optionally) depending on sunrise / sunset.

[DVCSMP-1338] commenting out unused variables

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -0,0 +1,163 @@
+/**
+ *  PlantLink
+ *
+ *  This device type takes sensor data and converts it into a json packet to send to myplantlink.com
+ *  where its values will be computed for soil and plant type to show user readable values of how your
+ *  specific plant is doing.
+ *
+ *
+ *  Copyright 2015 Oso Technologies
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+import groovy.json.JsonBuilder
+
+metadata {
+    definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
+        capability "Sensor"
+
+        command "setStatusIcon"
+        command "setPlantFuelLevel"
+        command "setBatteryLevel"
+        command "setInstallSmartApp"
+
+        attribute "plantStatus","string"
+        attribute "plantFuelLevel","number"
+        attribute "linkBatteryLevel","string"
+        attribute "installSmartApp","string"
+
+        fingerprint profileId: "0104", inClusters: "0000,0001,0B04"
+    }
+
+    simulator {
+        status "battery": "read attr - raw: C0720100010A000021340A, dni: C072, endpoint: 01, cluster: 0001, size: 0A, attrId: 0000, encoding: 21, value: 0a34"
+        status "moisture": "read attr - raw: C072010B040A0001290000, dni: C072, endpoint: 01, cluster: 0B04, size: 0A, attrId: 0100, encoding: 29, value: 0000"
+    }
+
+    tiles {
+        standardTile("Title", "device.label") {
+            state("label", label:'PlantLink ${device.label}')
+        }
+
+        valueTile("plantMoistureTile", "device.plantFuelLevel", width: 1, height: 1) {
+            state("plantMoisture", label: '${currentValue}% Moisture')
+        }
+
+        valueTile("plantStatusTextTile", "device.plantStatus", decoration: "flat", width: 2, height: 2) {
+            state("plantStatusTextTile", label:'${currentValue}')
+        }
+
+        valueTile("battery", "device.linkBatteryLevel" ) {
+            state("battery", label:'${currentValue}% battery')
+        }
+        
+        valueTile("installSmartApp","device.installSmartApp", decoration: "flat", width: 3, height: 1) {
+        	state "needSmartApp", label:'Please install SmartApp "Required PlantLink Connector"', defaultState:true
+            state "connectedToSmartApp", label:'Connected to myplantlink.com'
+        }
+
+        main "plantStatusTextTile"
+        details(['plantStatusTextTile', "plantMoistureTile", "battery", "installSmartApp"])
+    }
+}
+
+def setStatusIcon(value){
+    def status = ''
+    switch (value) {
+    	case '0':
+	        status = 'Needs Water'
+            break
+    	case '1':
+        	status = 'Dry'
+            break
+    	case '2':
+   		case '3':
+        	status = 'Good'
+            break
+        case '4':
+        	status = 'Too Wet'
+            break
+    	case 'No Soil':
+        	status = 'Too Dry'
+        	setPlantFuelLevel(0)
+            break
+    	case 'Recently Watered':
+        	status = 'Watered'
+            setPlantFuelLevel(100)
+    		break
+    	case 'Low Battery':
+        	status = 'Low Battery'
+    		break
+    	case 'Waiting on First Measurement':
+	        status = 'Calibrating'
+            break
+    	default:
+        	status = "?"
+            break
+    }
+    sendEvent("name":"plantStatus", "value":status, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setPlantFuelLevel(value){
+    sendEvent("name":"plantFuelLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)	
+}
+
+def setBatteryLevel(value){
+    sendEvent("name":"linkBatteryLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setInstallSmartApp(value){
+	sendEvent("name":"installSmartApp", "value":value)
+}
+
+def parse(String description) {
+
+	def description_map = parseDescriptionAsMap(description)
+    def event_name = ""
+    def measurement_map = [
+            type: "link",
+            signal: "0x00",
+            zigbeedeviceid: device.zigbeeId,
+            created: new Date().time /1000 as int
+    ]
+    if (description_map.cluster == "0000"){
+    	/* version number, not used */
+        
+    } else if (description_map.cluster == "0001"){
+        /* battery voltage in mV (device needs minimium 2.1v to run) */
+        log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
+        event_name = "battery_status"
+        measurement_map["battery"] = "0x${description_map.value}"
+        
+    } else if (description_map.cluster == "0B04"){
+        /* raw moisture reading (needs to be sent to plantlink for soil/plant type conversion) */
+        log.debug "PlantLink - id ${device.zigbeeId}  raw moisture ${description_map.value}"
+        measurement_map["moisture"] = "0x${description_map.value}"
+        event_name = "moisture_status"
+        
+    } else{
+        log.debug "PlantLink - id ${device.zigbeeId} Unknown '${description}'"
+        return
+    }
+    
+    def json_builder = new JsonBuilder(measurement_map)
+    def result = createEvent(name: event_name, value: json_builder.toString())
+    return result
+}
+
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -15,6 +15,7 @@
  *	Author: SmartThings
  *	Date: 2013-12-04
  */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 metadata {
 	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
@@ -25,7 +26,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -0,0 +1,71 @@
+/**
+ *  Ecobee Sensor
+ *
+ *  Copyright 2015 Juan Risso
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Sensor"
+		capability "Temperature Measurement"
+		capability "Motion Sensor"
+		capability "Refresh"
+		capability "Polling"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+			)
+		}
+
+		standardTile("motion", "device.motion") {
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["temperature","motion"])
+		details(["temperature","motion","refresh"])
+	}
+}
+
+def refresh() {
+	log.debug "refresh..."
+	poll()
+}
+
+void poll() {
+	log.debug "Executing 'poll' using parent SmartApp"
+	parent.pollChildren(this)
+}
+
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -22,31 +22,31 @@ metadata {
 		capability "Polling"
 		capability "Sensor"
         capability "Refresh"
-        
+
         command "generateEvent"
         command "raiseSetpoint"
         command "lowerSetpoint"
         command "resumeProgram"
         command "switchMode"
-        
+
         attribute "thermostatSetpoint","number"
         attribute "thermostatStatus","string"
 	}
 
 	simulator { }
- 
-		tiles {
+
+    	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
@@ -54,27 +54,27 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"  
-            state "updating", label:"Working", icon: "st.secondary.secondary"  
+			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
 			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"           
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
 			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
-        standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"raiseSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-up"
+		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-        valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "thermostatSetpoint", label:'${currentValue}°'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
-		}    
+		}
 		standardTile("downButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"lowerSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-down"
-		}        
+			state "setpoint", action:"lowerSetpoint", icon:"st.thermostat.thermostat-down"
+		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
@@ -91,218 +91,196 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", label:'Resume Program', action:"device.resumeProgram", icon:"st.sonos.play-icon"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		main "temperature"
-        details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+	}
+
+	preferences {
+		input "holdType", "enum", title: "Hold Type", description: "When changing temperature, use Temporary (Until next transition) or Permanent hold (default)", required: false, options:["Temporary", "Permanent"]
 	}
 
 }
 
-/*
-    
-    preferences {
-		input "highTemperature", "number", title: "Auto Mode High Temperature:", defaultValue: 80
-		input "lowTemperature", "number", title: "Auto Mode Low Temperature:", defaultValue: 70
-        input name: "holdType", type: "enum", title: "Hold Type", description: "When changing temperature, use Temporary or Permanent hold", required: true, options:["Temporary", "Permanent"]
-  	}
-    
-*/
-
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	// TODO: handle '' attribute
- 
+
 }
 
-def refresh()
-{
-  log.debug "refresh called"
-  poll()
-  log.debug "refresh ended"
+def refresh() {
+	log.debug "refresh called"
+	poll()
+	log.debug "refresh ended"
 }
- 
-def go()
-{
-  log.debug "before:go tile tapped"
-  poll()
-  log.debug "after"
-}
- 
+
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	
+
 	def results = parent.pollChild(this)
-	parseEventData(results)
-	generateStatusEvent()
+	generateEvent(results) //parse received message from parent
 }
- 
-def parseEventData(Map results)
-{
+
+def generateEvent(Map results) {
 	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
- 
+	if(results) {
+		results.each { name, value ->
+
 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
-				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-		}                                   									
-		generateSetpointEvent ()  
-        generateStatusEvent ()
-	}
-}
+			def isChange = false
+			def isDisplayed = true
+			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
+			handlerName: name]
 
-void generateEvent(Map results)
-{
-	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
-        
- 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
 				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)                                    									 
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
+				isDisplayed = isChange
+				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+			} else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else {
+				isChange = isStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+			}
+			sendEvent(event)
 		}
-		generateSetpointEvent () 
-        generateStatusEvent()
+		generateSetpointEvent ()
+		generateStatusEvent ()
 	}
 }
- 
-private getThermostatDescriptionText(name, value, linkText)
-{
-	if(name == "temperature")
-	{
-		return "$linkText was $value°F"
+
+//return descriptionText to be shown on mobile activity feed
+private getThermostatDescriptionText(name, value, linkText) {
+	if(name == "temperature") {
+		return "$linkText temperature is $value°F"
+
+	} else if(name == "heatingSetpoint") {
+		return "heating setpoint is $value°F"
+
+	} else if(name == "coolingSetpoint"){
+		return "cooling setpoint is $value°F"
+
+	} else if (name == "thermostatMode") {
+		return "thermostat mode is ${value}"
+
+	} else if (name == "thermostatFanMode") {
+		return "thermostat fan mode is ${value}"
+
+	} else {
+		return "${name} = ${value}"
 	}
-	else if(name == "heatingSetpoint")
-	{
-		return "latest heating setpoint was $value°F"
+}
+
+void setHeatingSetpoint(setpoint) {
+	setHeatingSetpoint(setpoint.toDouble())
+}
+
+void setHeatingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = setpoint
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	//enforce limits of heatingSetpoint
+	if (heatingSetpoint > 79) {
+		heatingSetpoint = 79
+	} else if (heatingSetpoint < 45) {
+		heatingSetpoint = 45
 	}
-	else if(name == "coolingSetpoint")
-	{
-		return "latest cooling setpoint was $value°F"
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		coolingSetpoint = heatingSetpoint
+	}
+
+	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
 	}
-    else if (name == "thermostatMode")
-    {
-        return "thermostat mode is ${value}"
-    }
-    else
-    {
-        return "${name} = ${value}"
-    }
 }
 
-
-void setHeatingSetpoint(degreesF) {
-	setHeatingSetpoint(degreesF.toDouble())
+void setCoolingSetpoint(setpoint) {
+	setCoolingSetpoint(setpoint.toDouble())
 }
 
-void setHeatingSetpoint(Double degreesF) {
-	log.debug "setHeatingSetpoint({$degreesF})"
-	sendEvent("name":"heatingSetpoint", "value":degreesF)
-	Double coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "coolingSetpoint: $coolingSetpoint"
-	parent.setHold(this, degreesF, coolingSetpoint)
+void setCoolingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
+	def coolingSetpoint = setpoint
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	if (coolingSetpoint > 92) {
+		coolingSetpoint = 92
+	} else if (coolingSetpoint < 65) {
+		coolingSetpoint = 65
+	}
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		heatingSetpoint = coolingSetpoint
+	}
+
+	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
+	}
 }
 
-void setCoolingSetpoint(degreesF) {
-	setCoolingSetpoint(degreesF.toDouble())
-}
+void resumeProgram() {
 
-void setCoolingSetpoint(Double degreesF) {
-	log.debug "setCoolingSetpoint({$degreesF})"
-	sendEvent("name":"coolingSetpoint", "value":degreesF)
-	Double heatingSetpoint = device.currentValue("heatingSetpoint")
-	parent.setHold(this, heatingSetpoint, degreesF)
-}
+	log.debug "resumeProgram() is called"
+	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.resumeProgram(this, deviceId)) {
+		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
+		runIn(5, "poll")
+		log.debug "resumeProgram() is done"
+		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
+	} else {
+		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
+		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+	}
 
-def configure() {
-	
-}
-
-def resumeProgram() {
-	parent.resumeProgram(this)
 }
 
 def modes() {
 	if (state.modes) {
-        log.debug "Modes = ${state.modes}"
-    	return state.modes
-    }
-    else {
-    	state.modes = parent.availableModes(this)
-        log.debug "Modes = ${state.modes}"        
-        return state.modes
-    }
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
+	else {
+		state.modes = parent.availableModes(this)
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
 }
 
 def fanModes() {
 	["off", "on", "auto", "circulate"]
 }
 
-
 def switchMode() {
 	log.debug "in switchMode"
 	def currentMode = device.currentState("thermostatMode")?.value
@@ -314,7 +292,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-    log.debug "In switchToMode = ${nextMode}"
+	log.debug "In switchToMode = ${nextMode}"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
 		"$nextMode"()
@@ -376,300 +354,326 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
-	
+
 }
 
 def setThermostatFanMode(String value) {
 
 	log.debug "setThermostatFanMode({$value})"
-	
+
 }
 
 def generateModeEvent(mode) {
-
-   sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
 }
 
 def generateFanModeEvent(fanMode) {
-
-   sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true)
 }
 
 def generateOperatingStateEvent(operatingState) {
-
-   sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true)
 }
 
 def off() {
 	log.debug "off"
-	generateModeEvent("off")     
-    if (parent.setMode (this,"off"))
-        generateModeEvent("off")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()
-    generateStatusEvent()   
-	
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"off", deviceId))
+		generateModeEvent("off")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def heat() {
 	log.debug "heat"
-	generateModeEvent("heat")    
-    if (parent.setMode (this,"heat"))
-        generateModeEvent("heat")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"heat", deviceId))
+		generateModeEvent("heat")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
-    generateModeEvent("auxHeatOnly")    
-    if (parent.setMode (this,"auxHeatOnly"))
-        generateModeEvent("auxHeatOnly")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auxHeatOnly", deviceId))
+		generateModeEvent("auxHeatOnly")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def cool() {
 	log.debug "cool"
-    generateModeEvent("cool")
-    if (parent.setMode (this,"cool"))
-        generateModeEvent("cool")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"cool", deviceId))
+		generateModeEvent("cool")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auto() {
 	log.debug "auto"
-    generateModeEvent("auto")
-    if (parent.setMode (this,"auto"))
-        generateModeEvent("auto")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auto", deviceId))
+		generateModeEvent("auto")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def fanOn() {
 	log.debug "fanOn"
-    parent.setFanMode (this,"on")
-	
+//    parent.setFanMode (this,"on")
+
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-   	parent.setFanMode (this,"auto")    
-	
+//    parent.setFanMode (this,"auto")
+
 }
 
 def fanCirculate() {
 	log.debug "fanCirculate"
-    parent.setFanMode (this,"circulate")
-	
+//    parent.setFanMode (this,"circulate")
+
 }
 
 def fanOff() {
 	log.debug "fanOff"
-    parent.setFanMode (this,"off")
-	
+//    parent.setFanMode (this,"off")
+
 }
 
 def generateSetpointEvent() {
 
-   	log.debug "Generate SetPoint Event"
+	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-    log.debug "Current Mode = ${mode}" 
+	log.debug "Current Mode = ${mode}"
 
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    log.debug "Heating Setpoint = ${heatingSetpoint}"
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
 
 	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    log.debug "Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")                       
-        
-    }
-    else if (mode == "cool") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")     
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
-    } else if (mode == "auto") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":"Auto")
+	if (mode == "heat") {
 
-    } else if (mode == "off") {
-            
-        sendEvent("name":"thermostatSetpoint", "value":"Off")    
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
 
-    } else if (mode == "emergencyHeat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")           
+	}
+	else if (mode == "cool") {
 
-    }
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
+
+	} else if (mode == "auto") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
+	} else if (mode == "off") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
+	} else if (mode == "emergencyHeat") {
+
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+
+	}
 
 }
 
 void raiseSetpoint() {
-
-   	log.debug "Raise SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}"
-    
-    if (mode == "heat") {
-        
-        heatingSetpoint++
-        
-        if (heatingSetpoint > 99)
-           heatingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)               
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint++
-        
-        if (coolingSetpoint > 99)
-            coolingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)       
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"        
-        
-    }
-    generateStatusEvent()
+	def targetvalue
 
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow raiseSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue + 1
+
+		if (mode == "heat" && targetvalue > 79) {
+			targetvalue = 79
+		} else if (mode == "cool" && targetvalue > 92) {
+			targetvalue = 92
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode raiseSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
 }
 
-
+//called by tile when user hit raise temperature button on UI
 void lowerSetpoint() {
-   	log.debug "Lower SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}, Current Heating Setpoint = ${heatingSetpoint}, Current Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat" || mode == "emergencyHeat") {
-        
-        heatingSetpoint--  
-        
-        if (heatingSetpoint < 32)
-           heatingSetpoint = 32
+	def targetvalue
 
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint--
-        
-        if (coolingSetpoint < 32)
-           coolingSetpoint = 32
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint) 
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"
-        
-    }
-    generateStatusEvent()
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow lowerSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue - 1
+
+		if (mode == "heat" && targetvalue.toInteger() < 45) {
+			targetvalue = 45
+		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
+			targetvalue = 65
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode lowerSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
+}
+
+//called by raiseSetpoint() and lowerSetpoint()
+void alterSetpoint(temp) {
+
+	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
+
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
+		}
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
+		}
+	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
+			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	//step2: call parent.setHold to send http request to 3rd party cloud
+	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()   
-    def temperature = device.currentValue("temperature").toInteger()  
-    
-    def statusText
-    
-    log.debug "Generate Status Event for Mode = ${mode}"
-    log.debug "Temperature = ${temperature}"
-    log.debug "Heating set point = ${heatingSetpoint}"
-    log.debug "Cooling set point = ${coolingSetpoint}"
-    log.debug "HVAC Mode = ${mode}"
-    
-    if (mode == "heat") {
-    
-    	if (temperature >= heatingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Heating to ${heatingSetpoint}° F"
-        
-    } else if (mode == "cool") {
-    
-        if (temperature <= coolingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Cooling to ${coolingSetpoint}° F"
-        
-    } else if (mode == "auto") {
-        
-    	statusText = "Right Now: Auto"
-        
-    } else if (mode == "off") {
-    
-    	statusText = "Right Now: Off"
-        
-    } else if (mode == "emergencyHeat") {
-    
-    	statusText = "Emergency Heat"
-        
-    } else {
-    
-        statusText = "?"
-        
-    }
-    log.debug "Generate Status Event = ${statusText}"
-    sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true, isStateChange: true)
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def temperature = device.currentValue("temperature").toInteger()
+
+	def statusText
+
+	log.debug "Generate Status Event for Mode = ${mode}"
+	log.debug "Temperature = ${temperature}"
+	log.debug "Heating set point = ${heatingSetpoint}"
+	log.debug "Cooling set point = ${coolingSetpoint}"
+	log.debug "HVAC Mode = ${mode}"
+
+	if (mode == "heat") {
+
+		if (temperature >= heatingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Heating to ${heatingSetpoint}° F"
+
+	} else if (mode == "cool") {
+
+		if (temperature <= coolingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Cooling to ${coolingSetpoint}° F"
+
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "emergencyHeat") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
+	log.debug "Generate Status Event = ${statusText}"
+	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
 
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/harmony-activity.src/harmony-activity.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-        definition (name: "Logitech Harmony Activity", namespace: "smartthings", author: "Juan Risso") {
+        definition (name: "Harmony Activity", namespace: "smartthings", author: "Juan Risso") {
         capability "Switch"
         capability "Actuator"
 		capability "Refresh"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -17,44 +17,50 @@ metadata {
 	}
 
 	simulator {
-		// TODO: define status and reply messages here
+
 	}
 
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+
+			tileAttribute ("device.model", key: "SECONDARY_CONTROL") {
+				attributeState "model", label: '${currentValue}'
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setColor"
-		}
-
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
-			state "level", label: '${currentValue}%'
-		}
-
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..9000)") {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
 			state "colorTemp", action:"color temperature.setColorTemperature"
 		}
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main(["switch"])
-		details(["switch", "refresh", "level", "levelSliderControl", "rgbSelector", "colorTempSliderControl", "colorTemp"])
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
 }
 
@@ -70,7 +76,7 @@ def parse(String description) {
 def setHue(percentage) {
 	log.debug "setHue ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "hue:${percentage * 3.6}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "hue:${percentage * 3.6}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "hue", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -83,7 +89,7 @@ def setHue(percentage) {
 def setSaturation(percentage) {
 	log.debug "setSaturation ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "saturation:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "saturation:${percentage / 100}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "saturation", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -114,7 +120,7 @@ def setColor(Map color) {
 		}
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: attrs.join(" ")])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "color", value: color.hex)
 			sendEvent(name: "switch", value: "on")
@@ -135,9 +141,10 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", ["brightness": percentage / 100, "power": "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -148,7 +155,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -163,7 +170,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -172,7 +179,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -180,19 +187,26 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
-	if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data
+	def data = resp.data[0]
+	log.debug("Data: ${data}")
 
-	sendEvent(name: "level", value: sprintf("%.1f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
-	sendEvent(name: "hue",        value: data.color.hue / 3.6)
+	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
 	return []
 }
@@ -201,3 +215,11 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -16,41 +16,44 @@ metadata {
 	}
 
 	simulator {
-		// TODO: define status and reply messages here
+
 	}
 
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
-			state "level", label: '${currentValue}%'
-		}
-
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
 			state "colorTemp", action:"color temperature.setColorTemperature"
 		}
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main(["switch"])
-		details(["switch", "refresh", "level", "levelSliderControl", "colorTempSliderControl", "colorTemp"])
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
+
 }
 
 // parse events into attributes
@@ -72,9 +75,10 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [brightness: percentage / 100, power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -85,7 +89,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -100,7 +104,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -109,7 +113,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -117,16 +121,22 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
-	if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data
+	def data = resp.data[0]
 
-	sendEvent(name: "level", value: sprintf("%f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: data.product.name)
 
 	return []
 }
@@ -135,3 +145,11 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -79,8 +79,8 @@ metadata {
 	}
     
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 }
 

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -88,8 +88,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -27,7 +27,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
  
 	simulator {
@@ -43,8 +43,8 @@ metadata {
 				])
 		}
 		section {
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
  

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -45,8 +46,8 @@ metadata {
 				])
 		}
 		section {
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
 
@@ -352,4 +353,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -30,6 +30,7 @@
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
  	}
@@ -61,8 +62,8 @@
 				])
 		}
 		section {
- 			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
  		}
 		section {
  			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
@@ -115,31 +116,30 @@
 	}
  }
 
- def parse(String description) {
- 	
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
+def parse(String description) {
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
     else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
 
  	def result = map ? createEvent(map) : null
 
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+    else if (description?.startsWith('read attr -')) {
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
+    }
+	return result
+}
 
  private Map parseCatchAllMessage(String description) {
  	Map resultMap = [:]
@@ -178,28 +178,40 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private Map parseReportAttributeMessage(String description) {
+private List parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-    
-    Map resultMap = [:]
+
+	List result = []
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
+		result << getTemperatureResult(value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-  		resultMap = getAccelerationResult(descMap.value)
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+        result << getAccelerationResult(descMap.value)
 	}
-    else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-  		resultMap = parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return resultMap
+	return result
 }
 
 private Map parseCustomMessage(String description) {
@@ -363,29 +375,17 @@ def getTemperature(value) {
         
         /* sensitivity - default value (8) */
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400",
 
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0010",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0012",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0013",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0014",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
-		]
+        "send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -409,19 +409,19 @@ def getTemperature(value) {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code 0x104E", 
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 
@@ -519,6 +519,14 @@ private Map getXyzResult(results, description) {
 	]
 }
 
+private getManufacturerCode() {
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		return "0x110A"
+	} else {
+		return "0x104E"
+	}
+}
+
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -43,8 +43,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -32,8 +32,8 @@
  	}
 
  	preferences {
- 		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
  	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -34,8 +34,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -45,8 +45,8 @@ metadata {
 	}
     
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 
 	tiles {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,14 +33,14 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		tile(name: "powerChart", attribute: "powerContent", type: "HTML", url: '${currentValue}', width: 3, height: 2) { }
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "power"
-		details(["powerChart", "power", "refresh"])
+		details(["powerContent", "power", "refresh"])
 
 	}
 }
@@ -74,10 +74,10 @@ public addWattvisionData(json) {
 
 	log.trace "Adding data from Wattvision"
 
-	def data = json.data
+	def data = parseJson(json.data.toString())
 	def units = json.units ?: "watts"
 
-	if (data) {
+	if (data.size() > 0) {
 		def latestData = data[-1]
 		data.each {
 			sendPowerEvent(it.t, it.v, units, (latestData == it))
@@ -103,3 +103,7 @@ private sendPowerEvent(time, value, units, isLatest = false) {
 	sendEvent(eventData)
 
 }
+
+def parseJson(String s) {
+	new groovy.json.JsonSlurper().parseText(s)
+}

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -25,8 +25,8 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-CIA19NAE26", deviceJoinName: "Sengled Element touch"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45852", deviceJoinName: "GE Zigbee Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45857", deviceJoinName: "GE Zigbee In-Wall Dimmer"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45852", deviceJoinName: "GE Zigbee Plug-In Dimmer"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45857", deviceJoinName: "GE Zigbee In-Wall Dimmer"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -17,15 +17,14 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -136,15 +136,15 @@ def parse(String description) {
 
 // Lock capability commands
 def lock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
-    log.info "lock() -- cmds: $cmds"
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    //log.info "lock() -- cmds: $cmds"
     //return cmds
     "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
 }
 
 def unlock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
-    log.info "unlock() -- cmds: $cmds"
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    //log.info "unlock() -- cmds: $cmds"
     //return cmds
     "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -23,8 +23,8 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "0003, 000A,0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -17,7 +17,6 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -23,18 +23,18 @@ metadata {
         capability "Color Temperature"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
     }
 
     // UI tile definitions

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -66,9 +66,20 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def updated() {
+	try {
+		if (!state.init) {
+			state.init = true
+			response(secureSequence([zwave.doorLockV1.doorLockOperationGet(), zwave.batteryV1.batteryGet()]))
+		}
+	} catch (e) {
+		log.warn "updated() threw $e"
+	}
+}
+
 def parse(String description) {
 	def result = null
-	if (description.startsWith("Err")) {
+	if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -80,6 +91,8 @@ def parse(String description) {
 				displayed: true,
 			)
 		}
+	} else if (description == "updated") {
+		return null
 	} else {
 		def cmd = zwave.parse(description, [ 0x98: 1, 0x72: 2, 0x85: 2, 0x86: 1 ])
 		if (cmd) {
@@ -286,7 +299,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 			}
 			break
 		case 167:
-			if (!state.lastbatt || (new Date().time) - state.lastbatt > 12*60*60*1000) {
+			if (!state.lastbatt || now() - state.lastbatt > 12*60*60*1000) {
 				map = [ descriptionText: "$device.displayName: battery low", isStateChange: true ]
 				result << response(secure(zwave.batteryV1.batteryGet()))
 			} else {
@@ -431,7 +444,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	} else {
 		map.value = cmd.batteryLevel
 	}
-	state.lastbatt = new Date().time
+	state.lastbatt = now()
 	createEvent(map)
 }
 
@@ -499,15 +512,14 @@ def refresh() {
 		cmds << "delay 4200"
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()  // old Schlage locks use group 2 and don't secure the Association CC
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
-	} else if (new Date().time - state.associationQuery.toLong() > 9000) {
-		log.debug "setting association"
+		state.associationQuery = now()
+	} else if (secondsPast(state.associationQuery, 9)) {
 		cmds << "delay 6000"
 		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
 		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
+		state.associationQuery = now()
 	}
 	log.debug "refresh sending ${cmds.inspect()}"
 	cmds
@@ -515,55 +527,22 @@ def refresh() {
 
 def poll() {
 	def cmds = []
-	if (state.assoc != zwaveHubNodeId && secondsPast(state.associationQuery, 19 * 60)) {
-		log.debug "setting association"
-		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
-		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
-		cmds << "delay 6000"
-		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		cmds << "delay 6000"
-		state.associationQuery = new Date().time
-	} else {
-		// Only check lock state if it changed recently or we haven't had an update in an hour
-		def latest = device.currentState("lock")?.date?.time
-		if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
-			cmds << secure(zwave.doorLockV1.doorLockOperationGet())
-			state.lastPoll = (new Date()).time
-		} else if (!state.MSR) {
-			cmds << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-		} else if (!state.fw) {
-			cmds << zwave.versionV1.versionGet().format()
-		} else if (!state.codes) {
-			state.pollCode = 1
-			cmds << secure(zwave.userCodeV1.usersNumberGet())
-		} else if (state.pollCode && state.pollCode <= state.codes) {
-			cmds << requestCode(state.pollCode)
-		} else if (!state.lastbatt || (new Date().time) - state.lastbatt > 53*60*60*1000) {
-			cmds << secure(zwave.batteryV1.batteryGet())
-		} else if (!state.enc) {
-			encryptCodes()
-			state.enc = 1
-		}
+	// Only check lock state if it changed recently or we haven't had an update in an hour
+	def latest = device.currentState("lock")?.date?.time
+	if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
+		cmds << secure(zwave.doorLockV1.doorLockOperationGet())
+		state.lastPoll = now()
+	} else if (!state.lastbatt || now() - state.lastbatt > 53*60*60*1000) {
+		cmds << secure(zwave.batteryV1.batteryGet())
+		state.lastbatt = now()  //inside-214
 	}
-	log.debug "poll is sending ${cmds.inspect()}"
-	device.activity()
-	cmds ?: null
-}
-
-private def encryptCodes() {
-	def keys = new ArrayList(state.keySet().findAll { it.startsWith("code") })
-	keys.each { key ->
-		def match = (key =~ /^code(\d+)$/)
-		if (match) try {
-			def keynum = match[0][1].toInteger()
-			if (keynum > 30 && !state[key]) {
-				state.remove(key)
-			} else if (state[key] && !state[key].startsWith("~")) {
-				log.debug "encrypting $key: ${state[key].inspect()}"
-				state[key] = encrypt(state[key])
-			}
-		} catch (java.lang.NumberFormatException e) { }
+	if (cmds) {
+		log.debug "poll is sending ${cmds.inspect()}"
+		cmds
+	} else {
+		// workaround to keep polling from stopping due to lack of activity
+		sendEvent(descriptionText: "skipping poll", isStateChange: true, displayed: false)
+		null
 	}
 }
 
@@ -672,7 +651,7 @@ private Boolean secondsPast(timestamp, seconds) {
 			return true
 		}
 	}
-	return (new Date().time - timestamp) > (seconds * 1000)
+	return (now() - timestamp) > (seconds * 1000)
 }
 
 private allCodesDeleted() {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -115,6 +115,10 @@ def strobe() {
 	]
 }
 
+def both() {
+	on()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

smartapps/imbrianj/nobody-home.src/nobody-home.groovy

@@ -1,164 +1,427 @@
 /**
  *  Nobody Home
  *
- *  Author: brian@bevey.org
- *  Date: 12/19/14
+ *  Author: brian@bevey.org, raychi@gmail.com
+ *  Date: 12/02/2015
  *
- *  Monitors a set of presence detectors and triggers a mode change when everyone has left.
- *  When everyone has left, sets mode to a new defined mode.
- *  When at least one person returns home, set the mode back to a new defined mode.
- *  When someone is home - or upon entering the home, their mode may change dependent on sunrise / sunset.
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing,
+ *  software distributed under the License is distributed on an "AS
+ *  IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ *  express or implied. See the License for the specific language
+ *  governing permissions and limitations under the License.
  */
 
-definition(
-  name: "Nobody Home",
-  namespace: "imbrianj",
-  author: "brian@bevey.org",
-  description: "When everyone leaves, change mode.  If at least one person home, switch mode based on sun position.",
-  category: "Mode Magic",
-  iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-  iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+/**
+ *  Monitors a set of presence sensors and trigger appropriate mode
+ *  based on configured modes and sunrise/sunset time.
+ *
+ *  - When everyone is away [Away]
+ *  - When someone is home during the day [Home]
+ *  - When someone is home at the night [Night]
+ */
+
+// ********** App related functions **********
+
+// The definition provides metadata about the App to SmartThings.
+definition (
+    name:        "Nobody Home",
+    namespace:   "imbrianj",
+    author:      "brian@bevey.org",
+    description: "Automatically set Away/Home/Night mode based on a set of presence sensors and sunrise/sunset time.",
+    category:    "Mode Magic",
+    iconUrl:     "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
+// The preferences defines information the App needs from the user.
 preferences {
-  section("When all of these people leave home") {
-    input "people", "capability.presenceSensor", multiple: true
-  }
-
-  section("Change to this mode to...") {
-    input "newAwayMode",    "mode", title: "Everyone is away"
-    input "newSunsetMode",  "mode", title: "At least one person home and nightfall"
-    input "newSunriseMode", "mode", title: "At least one person home and sunrise"
-  }
-
-  section("Away threshold (defaults to 10 min)") {
-    input "awayThreshold", "decimal", title: "Number of minutes", required: false
-  }
-
-  section("Notifications") {
-    input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
-  }
-}
-
-def installed() {
-  init()
-}
-
-def updated() {
-  unsubscribe()
-  init()
-}
-
-def init() {
-  subscribe(people,   "presence", presence)
-  subscribe(location, "sunrise",  setSunrise)
-  subscribe(location, "sunset",   setSunset)
-
-  state.sunMode = location.mode
-}
-
-def setSunrise(evt) {
-  changeSunMode(newSunriseMode)
-}
-
-def setSunset(evt) {
-  changeSunMode(newSunsetMode)
-}
-
-def changeSunMode(newMode) {
-  state.sunMode = newMode
-
-  if(everyoneIsAway() && (location.mode == newAwayMode)) {
-    log.debug("Mode is away, not evaluating")
-  }
-
-  else if(location.mode != newMode) {
-    def message = "${app.label} changed your mode to '${newMode}'"
-    send(message)
-    setLocationMode(newMode)
-  }
-
-  else {
-    log.debug("Mode is the same, not evaluating")
-  }
-}
-
-def presence(evt) {
-  if(evt.value == "not present") {
-    log.debug("Checking if everyone is away")
-
-    if(everyoneIsAway()) {
-      log.info("Starting ${newAwayMode} sequence")
-      def delay = (awayThreshold != null && awayThreshold != "") ? awayThreshold * 60 : 10 * 60
-      runIn(delay, "setAway")
-    }
-  }
-
-  else {
-    if(location.mode != state.sunMode) {
-      log.debug("Checking if anyone is home")
-
-      if(anyoneIsHome()) {
-        log.info("Starting ${state.sunMode} sequence")
-
-        changeSunMode(state.sunMode)
-      }
+    section("Presence sensors to monitor") {
+        input "people", "capability.presenceSensor", multiple: true
     }
 
-    else {
-      log.debug("Mode is the same, not evaluating")
-    }
-  }
-}
-
-def setAway() {
-  if(everyoneIsAway()) {
-    if(location.mode != newAwayMode) {
-      def message = "${app.label} changed your mode to '${newAwayMode}' because everyone left home"
-      log.info(message)
-      send(message)
-      setLocationMode(newAwayMode)
+    section("Mode setting") {
+        input "newAwayMode",    "mode", title: "Everyone is away"
+        input "newSunriseMode", "mode", title: "Someone is home during the day"
+        input "newSunsetMode",  "mode", title: "Someone is home at night"
     }
 
-    else {
-      log.debug("Mode is the same, not evaluating")
+    section("Mode change delay (minutes)") {
+        input "awayThreshold", "decimal", title: "Away delay [5m]", required: false
+        input "arrivalThreshold", "decimal", title: "Arrival delay [2m]", required: false
     }
-  }
 
-  else {
-    log.info("Somebody returned home before we set to '${newAwayMode}'")
-  }
+    section("Notifications") {
+        input "sendPushMessage", "bool", title: "Push notification", required:false
+    }
 }
 
-private everyoneIsAway() {
-  def result = true
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = false
-  }
-
-  log.debug("everyoneIsAway: ${result}")
-
-  return result
+// called when the user installs the App
+def installed()
+{
+    log.debug("installed() @${location.name}: ${settings}")
+    initialize(true)
 }
 
-private anyoneIsHome() {
-  def result = false
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = true
-  }
-
-  log.debug("anyoneIsHome: ${result}")
-
-  return result
+// called when the user installs the app, or changes the App
+// preference
+def updated()
+{
+    log.debug("updated() @${location.name}: ${settings}")
+    unsubscribe()
+    initialize(false)
 }
 
-private send(msg) {
-  if(sendPushMessage != "No") {
-    log.debug("Sending push message")
-    sendPush(msg)
-  }
+def initialize(isInstall)
+{
+    // subscribe to all the events we care about
+    log.debug("Subscribing to events ...")
 
-  log.debug(msg)
+    // thing to subscribe, attribute/state we care about, and callback fn
+    subscribe(people,   "presence", presenceHandler)
+    subscribe(location, "sunrise",  sunriseHandler)
+    subscribe(location, "sunset",   sunsetHandler)
+
+    // set the optional parameter values. these are not available
+    // directly until the app has initialized (that is,
+    // installed/updated has returned). so here we access them through
+    // the settings object, as otherwise will get an exception.
+
+    // store information we need in state object so we can get access
+    // to it later in our event handlers.
+
+    // calculate the away threshold in seconds. can't use the simpler
+    // default falsy value, as value of 0 (no delay) is evaluated to
+    // false (not specified), but we want 0 to represent no delay. so
+    // we compare against null explicitly to see if the user has set a
+    // value or not.
+    if (settings.awayThreshold == null) {
+        settings.awayThreshold = 5  // default away 5 minute
+    }
+    state.awayDelay = (int) settings.awayThreshold * 60
+    log.debug("awayThreshold set to " + state.awayDelay + " second(s)")
+
+    if (settings.arrivalThreshold == null) {
+        settings.arrivalThreshold = 2  // default arrival 2 minute
+    }
+    state.arrivalDelay = (int) settings.arrivalThreshold * 60
+    log.debug("arrivalThreshold set to " + state.arrivalDelay + " second(s)")
+
+    // get push notification setting
+    state.isPush = settings.sendPushMessage ? true : false
+    log.debug("sendPushMessage set to " + state.isPush)
+
+    // on install (not update), figure out what mode we should be in
+    // IF someone's home. This value is needed so that when a presence
+    // sensor is triggered, we know what mode to set the system to, as
+    // the sunrise/sunset event handler may not be triggered yet after
+    // a fresh install.
+    if (isInstall) {
+        // TODO: for now, we simply assume daytime. a better approach
+        //       would be to figure out whether current time is day or
+        //       night, and set it appropriately. However there
+        //       doesn't seem to be a way to query this directly
+        //       without a zip code. This will become the correct
+        //       value at the next sunrise/sunset event.
+        log.debug("No sun info yet, assuming daytime")
+        state.modeIfHome = newSunriseMode
+
+        // set keep a separate sun mode state so we can show a more
+        // helpful message when sun events are triggered.
+        state.currentSunMode = "sunUnknown"
+
+        state.eventDevice = ""  // last event device
+
+        // device that triggered timer. This is not necessarily the
+        // eventDevice. For example, if A arrives, kick off timer,
+        // then b arrives before timer elapsed, we want the
+        // notification message to reference A, not B.
+        state.timerDevice = null
+
+        // anything in flight? We use this to avoid scheduling
+        // duplicate timers (so we don't extend the timer).
+        state.pendingOp = "init"
+
+        // now set the correct mode for the location. This way, we
+        // don't need to wait for the next sun/presence event.
+
+        // we schedule this action to run after the app has fully
+        // initialized. This way, the app install is faster and the
+        // user customized app name is used in the notification.
+        runIn(7, "setInitialMode")
+    }
+    // On update, we don't change state.modeIfHome. This is so that we
+    // preserve the current sun rise/set state we obtained in earlier
+    // sunset/sunrise handler. This way the app remains in the correct
+    // sun state when the user reconfigures it.
 }
+
+def setInitialMode()
+{
+    changeSunMode(state.modeIfHome)
+    state.pendingOp = null
+}
+
+// ********** sunrise/sunset handling **********
+
+// event handler when the sunrise time is reached
+def sunriseHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunriseMode
+    state.currentSunMode = "sunRise"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunriseMode)
+}
+
+// event handler when the sunset time is reached
+def sunsetHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunsetMode
+    state.currentSunMode = "sunSet"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunsetMode)
+}
+
+def changeSunMode(newMode)
+{
+    // if everyone is away, we need to check and ensure the system is
+    // in away mode.
+    if (isEveryoneAway()) {
+        // this shouldn not happen normally as the mode should already
+        // be changed during presenceHandler, but in case this is not
+        // done, such as when app is initially installed while away,
+        // and system is not in away mode, then we toggle it to away
+        // at the sun rise/set event.
+        changeMode(newAwayMode, " because no one is present")
+    } else {
+        // someone is home, we update the mode depending on
+        // sunrise/sunset.
+        if (state.currentSunMode == "sunRise") {
+            changeMode(newMode, " because it's sunrise")
+        } else if (state.currentSunMode == "sunSet") {
+            changeMode(newMode, " because it's sunset")
+        } else {
+            changeMode(newMode)
+        }
+    }
+}
+
+// ********** presence handling **********
+
+// event handler when presence sensor changes state
+def presenceHandler(evt)
+{
+    // get the device name that resulted in the change
+    state.eventDevice= evt.device?.displayName
+
+    // is setInitialMode() still pending?
+    if (state.pendingOp == "init") {
+        log.debug("Pending ${state.pendingOp} op still in progress, ignoring presence event")
+        return
+    }
+
+    if (evt.value == "not present") {
+        handleDeparture()
+    } else {
+        handleArrival()
+    }
+}
+
+def handleDeparture()
+{
+    log.info("${state.eventDevice} left ${location.name}")
+
+    // do nothing if someone's still home
+    if (!isEveryoneAway()) {
+        log.info("Someone is still present, no actions needed")
+        return
+    }
+
+    // Now we set away mode. We perform the following actions even if
+    // home is already in away mode because an arrival timer may be
+    // pending, and scheduling delaySetMode() has the nice effect of
+    // canceling any previous pending timer, which is what we want to
+    // do. So we do this even if delay is 0.
+    log.info("Scheduling ${newAwayMode} mode in " + state.awayDelay + "s")
+    state.pendingOp = "away"
+    state.timerDevice = state.eventDevice
+    // we always use runIn(). This has the benefit of automatically
+    // replacing any pending arrival/away timer. if any arrival timer
+    // is active, it will be clobbered with this away timer. If any
+    // away timer is active, it will be extended with this new timeout
+    // (though normally it should not happen)
+    runIn(state.awayDelay, "delaySetMode")
+}
+
+def handleArrival()
+{
+    // someone returned home, set home/night mode after delay
+    log.info("${state.eventDevice} arrived at ${location.name}")
+
+    def numHome = isAnyoneHome()
+    if (!numHome) {
+        // no one home, do nothing for now (should NOT happen)
+        log.warn("${deviceName} arrived, but isAnyoneHome() returned false!")
+        return
+    }
+
+    if (numHome > 1) {
+        // not the first one home, do nothing, as any action that
+        // should happen would've happened when the first sensor
+        // arrived. this is the opposite of isEveryoneAway() where we
+        // don't do anything if someone's still home.
+        log.debug("Someone is already present, no actions needed")
+        return
+    }
+
+    // check if any pending arrival timer is already active. we want
+    // the timer to trigger when the 1st person arrives, but not
+    // extended when the 2nd person arrives later. this should not
+    // happen because of the >1 check above, but just in case.
+    if (state.pendingOp == "arrive") {
+        log.debug("Pending ${state.pendingOp} op already in progress, do nothing")
+        return
+    }
+
+    // now we set home/night mode
+    log.info("Scheduling ${state.modeIfHome} mode in " + state.arrivalDelay + "s")
+    state.pendingOp = "arrive"
+    state.timerDevice = state.eventDevice
+    // if any away timer is active, it will be clobbered with
+    // this arrival timer
+    runIn(state.arrivalDelay, "delaySetMode")
+}
+
+
+// ********** helper functions **********
+
+// change the system to the new mode, unless its already in that mode.
+def changeMode(newMode, reason="")
+{
+    if (location.mode != newMode) {
+        // notification message
+        def message = "${location.name} changed mode from '${location.mode}' to '${newMode}'" + reason
+        setLocationMode(newMode)
+        send(message)  // send message after changing mode
+    } else {
+        log.debug("${location.name} is already in ${newMode} mode, no actions needed")
+    }
+}
+
+// create a useful departure/arrival reason string
+def reasonStr(isAway, delaySec, delayMin)
+{
+    def reason
+
+    // if we are invoked by timer, use the stored timer trigger
+    // device, otherwise use the last event device
+    if (state.timerDevice) {
+        reason = " because ${state.timerDevice} "
+    } else {
+        reason = " because ${state.eventDevice} "
+    }
+
+    if (isAway) {
+        reason += "left"
+    } else {
+        reason += "arrived"
+    }
+
+    if (delaySec) {
+        if (delaySec > 60) {
+            if (delayMin == null) {
+                delayMin = (int) delaySec / 60
+            }
+            reason += " ${delayMin} minutes ago"
+        } else {
+            reason += " ${delaySec}s ago"
+        }
+    }
+
+    return reason
+}
+
+// http://docs.smartthings.com/en/latest/smartapp-developers-guide/scheduling.html#schedule-from-now
+//
+// By default, if a method is scheduled to run in the future, and then
+// another call to runIn with the same method is made, the last one
+// overwrites the previously scheduled method.
+//
+// We use the above property to schedule our arrval/departure delay
+// using the same function so we don't have to worry about
+// arrival/departure timer firing independently and complicating code.
+def delaySetMode()
+{
+    def newMode = null
+    def reason = ""
+
+    // timer has elapsed, check presence status to figure out what we
+    // need to do
+    if (isEveryoneAway()) {
+        reason = reasonStr(true, state.awayDelay, awayThreshold)
+        newMode = newAwayMode
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: everyone is away")
+        }
+    } else {
+        reason = reasonStr(false, state.arrivalDelay, arrivalThreshold)
+        newMode = state.modeIfHome
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: someone is home")
+        }
+    }
+
+    // now change the mode
+    changeMode(newMode, reason);
+
+    state.pendingOp = null
+    state.timerDevice = null
+}
+
+private isEveryoneAway()
+{
+    def result = true
+
+    if (people.findAll { it?.currentPresence == "present" }) {
+        result = false
+    }
+    // log.debug("isEveryoneAway: ${result}")
+
+    return result
+}
+
+// return the number of people that are home
+private isAnyoneHome()
+{
+    def result = 0
+    // iterate over our people variable that we defined
+    // in the preferences method
+    for (person in people) {
+        if (person.currentPresence == "present") {
+            result++
+        }
+    }
+    return result
+}
+
+private send(msg)
+{
+    if (state.isPush) {
+        log.debug("Sending push notification")
+        sendPush(msg)
+    } else {
+        log.debug("Sending notification")
+        sendNotificationEvent(msg)
+    }
+    log.info(msg)
+}

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -11,9 +11,9 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *  
+ *
  *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
- *  devices for which the user has authorized. Likewise, Initial State's services call this 
+ *  devices for which the user has authorized. Likewise, Initial State's services call this
  *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
  *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
@@ -90,7 +90,7 @@ def subscribeToEvents() {
 	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
 	}
-	
+
 	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
 	}
@@ -218,7 +218,7 @@ def setAccessKey() {
 		atomicState.grokerSubdomain = "$newGrokerSubdomain"
 		atomicState.isBucketCreated = false
 	}
-    
+
 	if (newAccessKey && newAccessKey != atomicState.accessKey) {
 		atomicState.accessKey = "$newAccessKey"
 		atomicState.isBucketCreated = false
@@ -262,7 +262,7 @@ def uninstalled() {
 }
 
 def tryCreateBucket() {
-	
+
 	// can't ship events if there is no grokerSubdomain
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		log.error "streaming url is currently null"
@@ -330,57 +330,57 @@ def genericHandler(evt) {
 // This is a handler function for flushing the event buffer
 // after a specified amount of time to reduce the load on ST servers
 def flushBuffer() {
+	def eventBuffer = atomicState.eventBuffer
 	log.trace "About to flush the buffer on schedule"
-	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
-		tryShipEvents()
+	if (eventBuffer != null && eventBuffer.size() > 0) {
+		atomicState.eventBuffer = []
+		tryShipEvents(eventBuffer)
 	}
 }
 
 def eventHandler(name, value) {
-	log.debug atomicState.eventBuffer
-
-	def eventBuffer = atomicState.eventBuffer
 	def epoch = now() / 1000
-	
-	// if for some reason this code block is being run
-	// but the SmartApp wasn't propery setup during install
-	// we need to set initialize the eventBuffer.
-	if (!atomicState.eventBuffer) {
-		atomicState.eventBuffer = []
-	}
+	def eventBuffer = atomicState.eventBuffer ?: []
 	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
-	
-	log.debug eventBuffer
-
-	atomicState.eventBuffer = eventBuffer
 
 	if (eventBuffer.size() >= 10) {
-		tryShipEvents()
+		// Clear eventBuffer right away since we've already pulled it off of atomicState to reduce the risk of missing
+		// events.  This assumes the grokerSubdomain, accessKey, and bucketKey are set correctly to avoid the eventBuffer
+		// from growing unbounded.
+		atomicState.eventBuffer = []
+		tryShipEvents(eventBuffer)
+	} else {
+		// Make sure we persist the updated eventBuffer with the new event added back to atomicState
+		atomicState.eventBuffer = eventBuffer
 	}
+	log.debug "Event added to buffer: " + eventBuffer
 }
 
 // a helper function for shipping the atomicState.eventBuffer to Initial State
-def tryShipEvents() {
+def tryShipEvents(eventBuffer) {
 
+	def grokerSubdomain = atomicState.grokerSubdomain
 	// can't ship events if there is no grokerSubdomain
-	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+	if (grokerSubdomain == null || grokerSubdomain == "") {
 		log.error "streaming url is currently null"
 		return
 	}
+	def accessKey = atomicState.accessKey
+	def bucketKey = atomicState.bucketKey
 	// can't ship if access key and bucket key are null, so finish trying
-	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
+	if (accessKey == null || bucketKey == null) {
 		return
 	}
 
 	def eventPost = [
-		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
+		uri: "https://${grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${atomicState.bucketKey}",
-			"X-IS-AccessKey": "${atomicState.accessKey}",
+			"X-IS-BucketKey": "${bucketKey}",
+			"X-IS-AccessKey": "${accessKey}",
 			"Accept-Version": "0.0.2"
 		],
-		body: atomicState.eventBuffer
+		body: eventBuffer
 	]
 
 	try {
@@ -389,13 +389,10 @@ def tryShipEvents() {
 			log.debug "shipped events and got ${resp.status}"
 			if (resp.status >= 400) {
 				log.error "shipping failed... ${resp.data}"
-			} else {
-				// clear the buffer
-				atomicState.eventBuffer = []
 			}
 		}
 	} catch (e) {
 		log.error "shipping events failed: $e"
 	}
-	
+
 }

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -0,0 +1,389 @@
+/**
+ *  Required PlantLink Connector
+ *  This SmartApp forwards the raw data of the deviceType to myplantlink.com
+ *  and returns it back to your device after calculating soil and plant type.
+ *
+ *  Copyright 2015 Oso Technologies
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+import groovy.json.JsonBuilder
+import java.util.regex.Matcher
+import java.util.regex.Pattern
+ 
+definition(
+    name: "PlantLink Connector",
+    namespace: "Osotech",
+    author: "Oso Technologies",
+    description: "This SmartApp connects to myplantlink.com and forwards the device data to it so it can calculate easy to read plant status for your specific plant's needs.",
+    category:  "Convenience",
+    iconUrl:   "https://dashboard.myplantlink.com/images/apple-touch-icon-76x76-precomposed.png",
+    iconX2Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-120x120-precomposed.png",
+    iconX3Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-152x152-precomposed.png"
+) {
+    appSetting "client_id"
+    appSetting "client_secret"
+    appSetting "https_plantLinkServer"
+}
+
+preferences {
+    page(name: "auth", title: "Step 1 of 2", nextPage:"deviceList", content:"authPage")
+    page(name: "deviceList", title: "Step 2 of 2", install:true, uninstall:false){
+        section {
+            input "plantlinksensors", "capability.sensor", title: "Select PlantLink sensors", multiple: true
+        }
+    }
+}
+
+mappings {
+    path("/swapToken") {
+        action: [
+                GET: "swapToken"
+        ]
+    }
+}
+
+def authPage(){
+    if(!atomicState.accessToken){
+        createAccessToken()
+        atomicState.accessToken = state.accessToken
+    }
+
+	def redirectUrl = oauthInitUrl()
+    def uninstallAllowed = false
+    def oauthTokenProvided = false
+    if(atomicState.authToken){
+        uninstallAllowed = true
+        oauthTokenProvided = true
+    }
+
+    if (!oauthTokenProvided) {
+        return dynamicPage(name: "auth", title: "Step 1 of 2", nextPage:null, uninstall:uninstallAllowed) {
+            section(){
+                href(name:"login",
+                     url:redirectUrl, 
+                     style:"embedded",
+                     title:"PlantLink", 
+                     image:"https://dashboard.myplantlink.com/images/PLlogo.png", 
+                     description:"Tap to login to myplantlink.com")
+            }
+        }
+    }else{
+        return dynamicPage(name: "auth", title: "Step 1 of 2 - Completed", nextPage:"deviceList", uninstall:uninstallAllowed) {
+	        section(){
+               paragraph "You are logged in to myplantlink.com, tap next to continue", image: iconUrl
+ 			   href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
+            }
+        }
+    }
+}
+
+def installed() {
+    log.debug "Installed with settings: ${settings}"
+    initialize()
+}
+
+def updated() {
+    log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+def uninstalled() {
+    if (plantlinksensors){
+        plantlinksensors.each{ sensor_device ->
+            sensor_device.setInstallSmartApp("needSmartApp")
+        }
+    }
+}
+
+def initialize() {
+    atomicState.attached_sensors = [:]
+    if (plantlinksensors){
+        subscribe(plantlinksensors, "moisture_status", moistureHandler)
+        subscribe(plantlinksensors, "battery_status", batteryHandler)
+        plantlinksensors.each{ sensor_device ->
+            sensor_device.setStatusIcon("Waiting on First Measurement")
+            sensor_device.setInstallSmartApp("connectedToSmartApp")
+        }
+    }
+}
+
+def dock_sensor(device_serial, expected_plant_name) {
+    def docking_body_json_builder = new JsonBuilder([version: '1c', smartthings_device_id: device_serial])
+    def docking_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/smartthings/links",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+            body: docking_body_json_builder.toString()
+    ]
+    def plant_post_body_map = [
+            plant_type_key: 999999,
+            soil_type_key : 1000004
+    ]
+    def plant_post_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/plants",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+    ]
+    log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
+    httpPost(docking_params) { docking_response ->
+        if (parse_api_response(docking_response, "Docking a link")) {
+            if (docking_response.data.plants.size() == 0) {
+                log.debug "creating plant for - ${expected_plant_name}"
+                plant_post_body_map["name"] = expected_plant_name
+                plant_post_body_map['links_key'] = [docking_response.data.key]
+                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
+                plant_post_params["body"] = plant_post_body_json_builder.toString()
+                httpPost(plant_post_params) { plant_post_response ->
+                    if(parse_api_response(plant_post_response, 'creating plant')){
+                        def attached_map = atomicState.attached_sensors
+                        attached_map[device_serial] = plant_post_response.data
+                        atomicState.attached_sensors = attached_map
+                    }
+                }
+            } else {
+                def plant = docking_response.data.plants[0]
+                def attached_map = atomicState.attached_sensors
+                attached_map[device_serial] = plant
+                atomicState.attached_sensors = attached_map
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+            }
+        }
+    }
+    return true
+}
+
+def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
+    def plant_put_params = [
+		uri : appSettings.https_plantLinkServer,
+        headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+        contentType : "application/json"
+    ]
+    if (plant.name != expected_plant_name) {
+        log.debug "updating plant for - ${expected_plant_name}"
+        plant_put_params["path"] = "/api/v1/plants/${plant.key}"
+        def plant_put_body_map = [
+			name: expected_plant_name
+        ]
+        def plant_put_body_json_builder = new JsonBuilder(plant_put_body_map)
+        plant_put_params["body"] = plant_put_body_json_builder.toString()
+        httpPut(plant_put_params) { plant_put_response ->
+            parse_api_response(plant_put_response, 'updating plant name')
+        }
+    }
+}
+
+def moistureHandler(event){
+    def expected_plant_name = "SmartThings - ${event.displayName}"
+    def device_serial = getDeviceSerialFromEvent(event)
+    
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
+        dock_sensor(device_serial, expected_plant_name)
+    }else{
+        def measurement_post_params = [
+                uri: appSettings.https_plantLinkServer,
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                contentType: "application/json",
+                body: event.value
+        ]
+        httpPost(measurement_post_params) { measurement_post_response ->
+            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
+                    measurement_post_response.data.size() >0){
+                def measurement = measurement_post_response.data[0]
+                def plant =  measurement.plant
+                log.debug plant
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+                plantlinksensors.each{ sensor_device ->
+                    if (sensor_device.id == event.deviceId){
+                        sensor_device.setStatusIcon(plant.status)
+                        if (plant.last_measurements && plant.last_measurements[0].moisture){
+                            sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
+                        }
+                        if (plant.last_measurements && plant.last_measurements[0].battery){
+                            sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+def batteryHandler(event){
+    def expected_plant_name = "SmartThings - ${event.displayName}"
+    def device_serial = getDeviceSerialFromEvent(event)
+    
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
+        dock_sensor(device_serial, expected_plant_name)
+    }else{
+        def measurement_post_params = [
+                uri: appSettings.https_plantLinkServer,
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                contentType: "application/json",
+                body: event.value
+        ]
+        httpPost(measurement_post_params) { measurement_post_response ->
+            parse_api_response(measurement_post_response, 'creating battery measurement')
+        }
+    }
+}
+
+def getDeviceSerialFromEvent(event){
+    def pattern = /.*"zigbeedeviceid"\s*:\s*"(\w+)".*/
+    def match_result = (event.value =~ pattern)
+    return match_result[0][1]
+}
+
+def oauthInitUrl(){
+	atomicState.oauthInitState = UUID.randomUUID().toString()
+    def oauthParams = [
+            response_type: "code",
+            client_id: appSettings.client_id,
+            state: atomicState.oauthInitState,
+            redirect_uri: buildRedirectUrl()
+    ]
+    return appSettings.https_plantLinkServer + "/oauth/oauth2/authorize?" + toQueryString(oauthParams)
+}
+
+def buildRedirectUrl(){
+    return getServerUrl() + "/api/token/${atomicState.accessToken}/smartapps/installations/${app.id}/swapToken"
+}
+
+def swapToken(){
+    def code = params.code
+    def oauthState = params.state
+    def stcid = appSettings.client_id
+    def postParams = [
+            method: 'POST',
+            uri: "https://oso-tech.appspot.com",
+            path: "/api/v1/oauth-token",
+            query: [grant_type:'authorization_code', code:params.code, client_id:stcid,
+                    client_secret:appSettings.client_secret, redirect_uri: buildRedirectUrl()],
+    ]
+
+    def jsonMap
+    httpPost(postParams) { resp ->
+        jsonMap = resp.data
+    }
+
+    atomicState.refreshToken = jsonMap.refresh_token
+    atomicState.authToken = jsonMap.access_token
+
+    def html = """
+<html>
+<head>
+<meta name="viewport" content="width=device-width, initial-scale=1">
+<style>
+	.container {
+		padding:25px;
+	}
+	.flex1 {
+    	width:33%;
+		float:left;
+		text-align: center;
+	}
+	p {
+		font-size: 2em;
+		font-family: Verdana, Geneva, sans-serif;
+		text-align: center;
+		color: #777;
+	}
+</style>
+</head>
+<body>
+	<div class="container">
+		<div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
+		<br clear="all">
+  </div>
+  <div class="container">
+		<p>Your PlantLink Account is now connected to SmartThings!</p>
+		<p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
+	</div>
+</body>
+</html>
+"""
+    render contentType: 'text/html', data: html
+}
+
+private refreshAuthToken() {
+    def stcid = appSettings.client_id
+    def refreshParams = [
+            method: 'POST',
+            uri: "https://hardware-dot-oso-tech.appspot.com",
+            path: "/api/v1/oauth-token",
+            query: [grant_type:'refresh_token', code:"${atomicState.refreshToken}", client_id:stcid,
+                    client_secret:appSettings.client_secret],
+    ]
+    try{
+        def jsonMap
+        httpPost(refreshParams) { resp ->
+            if(resp.status == 200){
+                log.debug "OAuth Token refreshed"
+                jsonMap = resp.data
+                if (resp.data) {
+                    atomicState.refreshToken = resp?.data?.refresh_token
+                    atomicState.authToken = resp?.data?.access_token
+                    if (data?.action && data?.action != "") {
+                        log.debug data.action
+                        "{data.action}"()
+                        data.action = ""
+                    }
+                }
+                data.action = ""
+            }else{
+                log.debug "refresh failed ${resp.status} : ${resp.status.code}"
+            }
+        }
+    }
+    catch(Exception e){
+        log.debug "caught exception refreshing auth token: " + e
+    }
+}
+
+def parse_api_response(resp, message) {
+    if (resp.status == 200) {
+        return true
+    } else {
+        log.error "sent ${message} Json & got http status ${resp.status} - ${resp.status.code}"
+        if (resp.status == 401) {
+            refreshAuthToken()
+            return false
+        } else {
+            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.", true)
+            return false
+        }
+    }
+}
+
+def getServerUrl() { 
+	return "https://graph.api.smartthings.com" 
+}
+
+def debugEvent(message, displayEvent) {
+    def results = [
+            name: "appdebug",
+            descriptionText: message,
+            displayed: displayEvent
+    ]
+    log.debug "Generating AppDebug Event: ${results}"
+    sendEvent (results)
+}
+
+def toQueryString(Map m){
+    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -0,0 +1,341 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Bose® SoundTouch® Control
+ *
+ *  Author: SmartThings & Joe Geiger
+ *
+ *  Date: 2015-30-09
+ */
+definition(
+    name: "Bose® SoundTouch® Control",
+    namespace: "smartthings",
+    author: "SmartThings & Joe Geiger",
+    description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	page(name: "mainPage", title: "Control your Bose® SoundTouch® when something happens", install: true, uninstall: true)
+	page(name: "timeIntervalInput", title: "Only during a certain time") {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage") {
+		def anythingSet = anythingSet()
+		if (anythingSet) {
+			section("When..."){
+				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
+			}
+		}
+		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
+			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
+		}
+		section("Perform this action"){
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "play", options: [
+				"Turn On & Play",
+				"Turn Off",
+				"Toggle Play/Pause",
+				"Skip to Next Track",
+				"Skip to Beginning/Previous Track",
+                "Play Preset 1",
+                "Play Preset 2",
+                "Play Preset 3",
+                "Play Preset 4",
+                "Play Preset 5",
+                "Play Preset 6"
+			]
+		}
+		section {
+			input "bose", "capability.musicPlayer", title: "Bose® SoundTouch® music player", required: true
+		}
+		section("More options", hideable: true, hidden: true) {
+			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false
+			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+			if (settings.modes) {
+            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+            }
+			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
+		}
+		section([mobileOnly:true]) {
+			label title: "Assign a name", required: false
+			mode title: "Set for specific mode(s)"
+		}
+	}
+}
+
+private anythingSet() {
+	for (name in ["motion","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","smoke","water","button1","triggerModes","timeOfDay"]) {
+		if (settings[name]) {
+			return true
+		}
+	}
+	return false
+}
+
+private ifUnset(Map options, String name, String capability) {
+	if (!settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+private ifSet(Map options, String name, String capability) {
+	if (settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribeToEvents()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	unschedule()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	log.trace "subscribeToEvents()"
+	subscribe(app, appTouchHandler)
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(smoke, "smoke.detected", eventHandler)
+	subscribe(smoke, "smoke.tested", eventHandler)
+	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
+	subscribe(water, "water.wet", eventHandler)
+	subscribe(button1, "button.pushed", eventHandler)
+
+	if (triggerModes) {
+		subscribe(location, modeChangeHandler)
+	}
+
+	if (timeOfDay) {
+		schedule(timeOfDay, scheduledTimeHandler)
+	}
+}
+
+def eventHandler(evt) {
+	if (allOk) {
+		def lastTime = state[frequencyKey(evt)]
+		if (oncePerDayOk(lastTime)) {
+			if (frequency) {
+				if (lastTime == null || now() - lastTime >= frequency * 60000) {
+					takeAction(evt)
+				}
+				else {
+					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
+				}
+			}
+			else {
+				takeAction(evt)
+			}
+		}
+		else {
+			log.debug "Not taking action because it was already taken today"
+		}
+	}
+}
+
+def modeChangeHandler(evt) {
+	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
+	if (evt.value in triggerModes) {
+		eventHandler(evt)
+	}
+}
+
+def scheduledTimeHandler() {
+	eventHandler(null)
+}
+
+def appTouchHandler(evt) {
+	takeAction(evt)
+}
+
+private takeAction(evt) {
+	log.debug "takeAction($actionType)"
+	def options = [:]
+	if (volume) {
+		bose.setLevel(volume as Integer)
+		options.delay = 1000
+	}
+
+	switch (actionType) {
+		case "Turn On & Play":
+			options ? bose.on(options) : bose.on()
+			break
+		case "Turn Off":
+			options ? bose.off(options) : bose.off()
+			break
+		case "Toggle Play/Pause":
+			def currentStatus = bose.currentValue("playpause")
+			if (currentStatus == "play") {
+				options ? bose.pause(options) : bose.pause()
+			}
+			else if (currentStatus == "pause") {
+				options ? bose.play(options) : bose.play()
+			}
+			break
+		case "Skip to Next Track":
+			options ? bose.nextTrack(options) : bose.nextTrack()
+			break
+		case "Skip to Beginning/Previous Track":
+			options ? bose.previousTrack(options) : bose.previousTrack()
+			break
+        case "Play Preset 1":
+			options ? bose.preset1(options) : bose.preset1()
+			break
+        case "Play Preset 2":
+			options ? bose.preset2(options) : bose.preset2()
+			break 
+        case "Play Preset 3":
+			options ? bose.preset3(options) : bose.preset3()
+			break
+        case "Play Preset 4":
+			options ? bose.preset4(options) : bose.preset4()
+			break
+        case "Play Preset 5":
+			options ? bose.preset5(options) : bose.preset5()
+			break
+        case "Play Preset 6":
+			options ? bose.preset6(options) : bose.preset6()
+			break
+		default:
+			log.error "Action type '$actionType' not defined"
+	}
+
+	if (frequency) {
+		state.lastActionTimeStamp = now()
+	}
+}
+
+private frequencyKey(evt) {
+	//evt.deviceId ?: evt.value
+	"lastActionTimeStamp"
+}
+
+private dayString(Date date) {
+	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
+	if (location.timeZone) {
+		df.setTimeZone(location.timeZone)
+	}
+	else {
+		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+	}
+	df.format(date)
+}
+
+private oncePerDayOk(Long lastTime) {
+	def result = true
+	if (oncePerDay) {
+		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
+		log.trace "oncePerDayOk = $result"
+	}
+	result
+}
+
+// TODO - centralize somehow
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting, location?.timeZone).time
+		def stop = timeToday(ending, location?.timeZone).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private timeIntervalLabel()
+{
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}
+// TODO - End Centralize

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -246,6 +246,9 @@ def toggle(devices) {
 	else if (devices*.currentValue('lock').contains('locked')) {
 		devices.unlock()
 	}
+	else if (devices*.currentValue('lock').contains('unlocked')) {
+		devices.lock()
+	}
 	else if (devices*.currentValue('alarm').contains('off')) {
         devices.siren()
     }

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -1,7 +1,7 @@
 /**
  *  Every Element
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,349 +14,555 @@
  *
  */
 definition(
-	name: "Every Element",
-	namespace: "smartthings/examples",
-	author: "SmartThings",
-	description: "Every element demonstration app",
-	category: "SmartThings Internal",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
+        name: "Every Element",
+        namespace: "smartthings/examples",
+        author: "SmartThings",
+        description: "Every element demonstration app",
+        category: "SmartThings Internal",
+        iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+        iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
 preferences {
-	page(name: "firstPage")
-	page(name: "inputPage")
-	page(name: "appPage")
-	page(name: "labelPage")
-	page(name: "modePage")
-	page(name: "paragraphPage")
-	page(name: "iconPage")
-	page(name: "hrefPage")
-	page(name: "buttonsPage")
-	page(name: "imagePage")
-	page(name: "videoPage")
-	page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
-	page(name: "flattenedPage")
+    // landing page
+    page(name: "firstPage")
+
+    // PageKit
+    page(name: "buttonsPage")
+    page(name: "imagePage")
+    page(name: "inputPage")
+    page(name: "inputBooleanPage")
+    page(name: "inputIconPage")
+    page(name: "inputImagePage")
+    page(name: "inputDevicePage")
+    page(name: "inputCapabilityPage")
+    page(name: "inputRoomPage")
+    page(name: "inputModePage")
+    page(name: "inputSelectionPage")
+    page(name: "inputHubPage")
+    page(name: "inputContactBookPage")
+    page(name: "inputTextPage")
+    page(name: "inputTimePage")
+    page(name: "appPage")
+    page(name: "hrefPage")
+    page(name: "paragraphPage")
+    page(name: "videoPage")
+    page(name: "labelPage")
+    page(name: "modePage")
+
+    // Every element helper pages
+    page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
+    page(name: "flattenedPage")
 }
 
 def firstPage() {
-	dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
-		section() {
-			href(page: "inputPage", title: "Element: 'input'")
-			href(page: "appPage", title: "Element: 'app'")
-			href(page: "labelPage", title: "Element: 'label'")
-			href(page: "modePage", title: "Element: 'mode'")
-			href(page: "paragraphPage", title: "Element: 'paragraph'")
-			href(page: "iconPage", title: "Element: 'icon'")
-			href(page: "hrefPage", title: "Element: 'href'")
-			href(page: "buttonsPage", title: "Element: 'buttons'")
-			href(page: "imagePage", title: "Element: 'image'")
-			href(page: "videoPage", title: "Element: 'video'")
-		}
-		section() {
-			href(page: "flattenedPage", title: "All of the above elements on a single page")
-		}
-	}
+    dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
+        section {
+            href(page: "appPage", title: "Element: 'app'")
+            href(page: "buttonsPage", title: "Element: 'buttons'")
+            href(page: "hrefPage", title: "Element: 'href'")
+            href(page: "imagePage", title: "Element: 'image'")
+            href(page: "inputPage", title: "Element: 'input'")
+            href(page: "labelPage", title: "Element: 'label'")
+            href(page: "modePage", title: "Element: 'mode'")
+            href(page: "paragraphPage", title: "Element: 'paragraph'")
+            href(page: "videoPage", title: "Element: 'video'")
+        }
+        section {
+            href(page: "flattenedPage", title: "All of the above elements on a single page")
+        }
+    }
 }
 
 def inputPage() {
-	dynamicPage(name: "inputPage", title: "Every 'input' type") {
-		section("enum") {
-			input(type: "enum", name: "enumRefresh", title: "submitOnChange:true", required: false, multiple: true, options: ["one", "two", "three"], submitOnChange: true)
-			if (enumRefresh) {
-				paragraph "${enumRefresh}"
-			}
-			input(type: "enum", name: "enumSegmented", title: "style:segmented", required: false, multiple: true, options: ["one", "two", "three"], style: "segmented")
-			input(type: "enum", name: "enum", title: "required:false, multiple:false", required: false, multiple: false, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumRequired", title: "required:true", required: true, multiple: false, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumMultiple", title: "multiple:true", required: false, multiple: true, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, options: ["one", "two", "three"], image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-			input(type: "enum", name: "enumWithGroupedOptions", title: "groupedOptions", description: "This enum has grouped options", required: false, multiple: true, groupedOptions: [
-				[
-					title : "the group title that is displayed",
-					order : 0, // the order of the group; 0-based
-					image : "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", // not yet supported
-					values: [
-						[
-							key  : "the value that will be placed in SmartApp settings.", // such as a device id
-							value: "the title of the selectable option that is displayed", // such as a device name
-							order: 0 // the order of the option
-						]
-					]
-				],
-				[
-					title : "the second group title that is displayed",
-					order : 1, // the order of the group; 0-based
-					image : null, // not yet supported
-					values: [
-						[
-							key  : "some_device_id",
-							value: "some_device_name",
-							order: 1 // the order of the option. This option will appear second in the list even though it is the first option defined in this map
-						],
-						[
-							key  : "some_other_device_id",
-							value: "some_other_device_name",
-							order: 0 // the order of the option. This option will appear first in the list even though it is not the first option defined in this map
-						]
-					]
-				]
-			])
-		}
-		section("text") {
-			input(type: "text", name: "text", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "text", name: "textRequired", title: "required:true", required: true, multiple: false)
-			input(type: "text", name: "textWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("number") {
-			input(type: "number", name: "number", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "number", name: "numberRequired", title: "required:true", required: true, multiple: false)
-			input(type: "number", name: "numberWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("boolean") {
-			input(type: "boolean", name: "boolean", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "boolean", name: "booleanWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("password") {
-			input(type: "password", name: "password", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "password", name: "passwordRequired", title: "required:true", required: true, multiple: false)
-			input(type: "password", name: "passwordWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("phone") {
-			input(type: "phone", name: "phone", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "phone", name: "phoneRequired", title: "required:true", required: true, multiple: false)
-			input(type: "phone", name: "phoneWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("email") {
-			input(type: "email", name: "email", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "email", name: "emailRequired", title: "required:true", required: true, multiple: false)
-			input(type: "email", name: "emailWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("decimal") {
-			input(type: "decimal", name: "decimal", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "decimal", name: "decimalRequired", title: "required:true", required: true, multiple: false)
-			input(type: "decimal", name: "decimalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("mode") {
-			input(type: "mode", name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "mode", name: "modeRequired", title: "required:true", required: true, multiple: false)
-			input(type: "mode", name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "mode", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("icon") {
-			input(type: "icon", name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "icon", name: "iconRequired", title: "required:true", required: true, multiple: false)
-			input(type: "icon", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("capability") {
-			input(type: "capability.switch", name: "capability", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "capability.switch", name: "capabilityRequired", title: "required:true", required: true, multiple: false)
-			input(type: "capability.switch", name: "capabilityMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "capability.switch", name: "capabilityWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("hub") {
-			input(type: "hub", name: "hub", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "hub", name: "hubRequired", title: "required:true", required: true, multiple: false)
-			input(type: "hub", name: "hubMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "hub", name: "hubWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("device") {
-			input(type: "device.switch", name: "device", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "device.switch", name: "deviceRequired", title: "required:true", required: true, multiple: false)
-			input(type: "device.switch", name: "deviceMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "device.switch", name: "deviceWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("time") {
-			input(type: "time", name: "time", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "time", name: "timeRequired", title: "required:true", required: true, multiple: false)
-			input(type: "time", name: "timeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("contact-book") {
-			input("recipients", "contact", title: "Notify", description: "Send notifications to") {
-				input(type: "phone", name: "phone", title: "Send text message to", required: false, multiple: false)
-				input(type: "boolean", name: "boolean", title: "Send push notification", required: false, multiple: false)
-			}
-		}
-	}
+    dynamicPage(name: "inputPage", title: "Links to every 'input' element") {
+        section {
+            href(page: "inputBooleanPage", title: "to boolean page")
+            href(page: "inputIconPage", title: "to icon page")
+            href(page: "inputImagePage", title: "to image page")
+            href(page: "inputSelectionPage", title: "to selection page")
+            href(page: "inputTextPage", title: "to text page")
+            href(page: "inputTimePage", title: "to time page")
+        }
+        section("subsets of selection input") {
+            href(page: "inputDevicePage", title: "to device selection page")
+            href(page: "inputCapabilityPage", title: "to capability selection page")
+            href(page: "inputRoomPage", title: "to room selection page")
+            href(page: "inputModePage", title: "to mode selection page")
+            href(page: "inputHubPage", title: "to hub selection page")
+            href(page: "inputContactBookPage", title: "to contact-book selection page")
+        }
+    }
+}
+
+def inputBooleanPage() {
+    dynamicPage(name: "inputBooleanPage") {
+        section {
+            paragraph "The `required` and `multiple` attributes have no effect because the value will always be either `true` or `false`"
+        }
+        section {
+            input(type: "boolean", name: "booleanWithoutDescription", title: "without description", description: null)
+            input(type: "boolean", name: "booleanWithDescription", title: "with description", description: "This has a description")
+        }
+        section("defaultValue: 'true'") {
+            input(type: "boolean", name: "booleanWithDefaultValue", title: "", description: "", defaultValue: "true")
+        }
+        section("with image") {
+            input(type: "boolean", name: "booleanWithoutDescriptionWithImage", title: "without description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", description: null)
+            input(type: "boolean", name: "booleanWithDescriptionWithImage", title: "with description", description: "This has a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputIconPage() {
+    dynamicPage(name: "inputIconPage") {
+        section {
+            paragraph "`description` is not displayed for icon elements"
+            paragraph "`multiple` has no effect because you can only choose a single icon"
+        }
+        section("required: true") {
+            input(type: "icon", name: "iconRequired", title: "without description", required: true)
+            input(type: "icon", name: "iconRequiredWithDescription", title: "with description", description: "this is a description", required: true)
+        }
+        section("with image") {
+            paragraph "The image specified will be replaced after an icon is selected"
+            input(type: "icon", name: "iconwithImage", title: "without description", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputImagePage() {
+    dynamicPage(name: "inputImagePage") {
+        section {
+            paragraph "This only exists in DeviceTypes. Someone should do something about that. (glares at MikeDave)"
+            paragraph "Go to the device preferences of a Mobile Presence device to see it in action"
+            paragraph "If you try to set the value of this, it will not behave as it would in Device Preferences"
+            input(type: "image", title: "This is kind of what it looks like", required: false)
+        }
+    }
+}
+
+
+def optionsGroup(List groups, String title) {
+    def group = [values:[], order: groups.size()]
+    group.title = title ?: ""
+    groups << group
+    return groups
+}
+def addValues(List groups, String key, String value) {
+    def lastGroup = groups[-1]
+    lastGroup["values"] << [
+            key: key,
+            value: value,
+            order: lastGroup["values"].size()
+    ]
+    return groups
+}
+def listToMap(List original) {
+    original.inject([:]) { result, v ->
+        result[v] = v
+        return result
+    }
+}
+def addGroup(List groups, String title, values) {
+    if (values instanceof List) {
+        values = listToMap(values)
+    }
+
+    values.inject(optionsGroup(groups, title)) { result, k, v ->
+        return addValues(result, k, v)
+    }
+    return groups
+}
+def addGroup(values) {
+    addGroup([], null, values)
+}
+/* Example usage of options builder
+
+// Creating grouped options
+    def newGroups = []
+    addGroup(newGroups, "first group", ["foo", "bar", "baz"])
+    addGroup(newGroups, "second group", [zero: "zero", one: "uno", two: "dos", three: "tres"])
+
+// simple list
+    addGroup(["a", "b", "c"])
+
+// simple map
+    addGroup(["a": "yes", "b": "no", "c": "maybe"])​​​​
+*/
+
+
+def inputSelectionPage() {
+
+    def englishOptions = ["One", "Two", "Three"]
+    def spanishOptions = ["Uno", "Dos", "Tres"]
+    def groupedOptions = []
+    addGroup(groupedOptions, "English", englishOptions)
+    addGroup(groupedOptions, "Spanish", spanishOptions)
+
+    dynamicPage(name: "inputSelectionPage") {
+
+        section("options variations") {
+            paragraph "tap these elements and look at the differences when selecting an option"
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
+        }
+
+        section("list vs map") {
+            paragraph "These should be identical in UI, but are different in code and will produce different settings"
+            input(type: "enum", name: "selectionList", title: "Choose a device", description: "settings will be something like ['Device1 Label']", groupedOptions: addGroup(["Device1 Label", "Device2 Label"]))
+            input(type: "enum", name: "selectionMap", title: "Choose a device", description: "settings will be something like ['device1-id']", groupedOptions: addGroup(["device1-id": "Device1 Label", "device2-id": "Device2 Label"]))
+        }
+
+        section("segmented") {
+            paragraph "segmented should only work if there are either 2 or 3 options to choose from"
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
+
+            paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
+            input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
+            input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
+
+            paragraph "specifying defaultValue still works with segmented selection elements"
+            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
+        }
+
+        section("required: true") {
+            input(type: "enum", name: "selectionRequired", title: "This is required", description: "It should look different when nothing is selected", groupedOptions: addGroup(["only option"]), required: true)
+        }
+
+        section("multiple: true") {
+            input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
+        }
+
+        section("with image") {
+            input(type: "enum", name: "selectionWithImage", title: "This has an image", description: "and a description", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputTextPage() {
+    dynamicPage(name: "inputTextPage", title: "Every 'text' variation") {
+        section("style and functional differences") {
+            input(type: "text", name: "textRequired", title: "required: true", description: "This should look different when nothing has been entered", required: true)
+            input(type: "text", name: "textWithImage", title: "with image", description: "This should look different when nothing has been entered", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", required: false)
+        }
+        section("text") {
+            input(type: "text", name: "text", title: "This has an alpha-numeric keyboard", description: "no special formatting", required: false)
+        }
+        section("password") {
+            input(type: "password", name: "password", title: "This has an alpha-numeric keyboard", description: "masks value", required: false)
+        }
+        section("email") {
+            input(type: "email", name: "email", title: "This has an email-specific keyboard", description: "no special formatting", required: false)
+        }
+        section("phone") {
+            input(type: "phone", name: "phone", title: "This has a numeric keyboard", description: "formatted for phone numbers", required: false)
+        }
+        section("decimal") {
+            input(type: "decimal", name: "decimal", title: "This has an numeric keyboard with decimal point", description: "no special formatting", required: false)
+        }
+        section("number") {
+            input(type: "number", name: "number", title: "This has an numeric keyboard without decimal point", description: "no special formatting", required: false)
+        }
+
+        section("specified ranges") {
+            paragraph "You can limit number and decimal inputs to a specific range."
+            input(range: "50..150", type: "decimal", name: "decimalRange50..150", title: "only values between 50 and 150 will pass validation", description: "no special formatting", required: false)
+            paragraph "Negative limits will add a negative symbol to the keyboard."
+            input(range: "-50..50", type: "number", name: "numberRange-50..50", title: "only values between -50 and 50 will pass validation", description: "no special formatting", required: false)
+            paragraph "Specify * to not limit one side or the other."
+            input(range: "*..0", type: "decimal", name: "decimalRange*..0", title: "only negative values will pass validation", description: "no special formatting", required: false)
+            input(range: "*..*", type: "number", name: "numberRange*..*", title: "only positive values will pass validation", description: "no special formatting", required: false)
+            paragraph "If you don't specify a range, it defaults to 0..*"
+        }
+    }
+}
+def inputTimePage() {
+    dynamicPage(name: "inputTimePage") {
+        section {
+            input(type: "time", name: "timeWithDescription", title: "a time picker", description: "with a description", required: false)
+            input(type: "time", name: "timeWithoutDescription", title: "without a description", description: null, required: false)
+            input(type: "time", name: "timeRequired", title: "required: true", required: true)
+        }
+    }
+}
+
+/// selection subsets
+def inputDevicePage() {
+
+    dynamicPage(name: "inputDevicePage") {
+
+        section("required: true") {
+            input(type: "device.switch", name: "deviceRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "device.switch", name: "deviceMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "device.switch", name: "deviceRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputCapabilityPage() {
+
+    dynamicPage(name: "inputCapabilityPage") {
+
+        section("required: true") {
+            input(type: "capability.switch", name: "capabilityRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "capability.switch", name: "capabilityMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "capability.switch", name: "capabilityRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputRoomPage() {
+
+    dynamicPage(name: "inputRoomPage") {
+
+        section("required: true") {
+            input(type: "room", name: "roomRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "room", name: "roomMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "room", name: "roomRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputModePage() {
+
+    dynamicPage(name: "inputModePage") {
+
+        section("required: true") {
+            input(type: "mode", name: "modeRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "mode", name: "modeMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "mode", name: "modeRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputHubPage() {
+
+    dynamicPage(name: "inputHubPage") {
+
+        section("required: true") {
+            input(type: "hub", name: "hubRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "hub", name: "hubMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "hub", name: "hubRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputContactBookPage() {
+
+    dynamicPage(name: "inputContactBookPage") {
+
+        section("required: true") {
+            input(type: "contact", name: "contactRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "contact", name: "contactMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "contact", name: "contactRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def appPage() {
-	dynamicPage(name: "appPage", title: "Every 'app' type") {
-		section {
-			paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
-		}
-		section("app") {
-			app(
-				name: "app",
-				title: "required:false, multiple:false",
-				required: false,
-				multiple: false,
-				namespace: "Steve",
-				appName: "Child SmartApp"
-			)
-			app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
-			app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
-			app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-		}
-		section("multiple:true") {
-			app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
-		}
-		section("multiple:true with image") {
-			app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-		}
-	}
+    dynamicPage(name: "appPage", title: "Every 'app' type") {
+        section {
+            paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
+        }
+        section("app") {
+            app(
+                    name: "app",
+                    title: "required:false, multiple:false",
+                    required: false,
+                    multiple: false,
+                    namespace: "Steve",
+                    appName: "Child SmartApp"
+            )
+            app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
+            app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
+            app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+        }
+        section("multiple:true") {
+            app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
+        }
+        section("multiple:true with image") {
+            app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+        }
+    }
 }
 
 def labelPage() {
-	dynamicPage(name: "labelPage", title: "Every 'Label' type") {
-		section("label") {
-			label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
-			label(name: "labelRequired", title: "required:true", required: true, multiple: false)
-			label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "labelPage", title: "Every 'Label' type") {
+        section("label") {
+            paragraph "The difference between a label element and a text input element is that the label element will effect the SmartApp directly by setting the label. An input element will place the set value in the SmartApp's settings."
+            paragraph "There are 3 here as an example. Never use more than 1 label element on a page."
+            label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
+            label(name: "labelRequired", title: "required:true", required: true, multiple: false)
+            label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def modePage() {
-	dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
-		section("mode") {
-			mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
-			mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
-			mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
-			mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
+        section("mode") {
+            paragraph "The difference between a mode element and a mode input element is that the mode element will effect the SmartApp directly by setting the modes it executes in. A mode input element will place the set value in the SmartApp's settings."
+            paragraph "Another difference is that you can select 'All Modes' when choosing which mode the SmartApp should execute in. This is the same as selecting no modes. When a SmartApp does not have modes specified, it will execute in all modes."
+            paragraph "There are 4 here as an example. Never use more than 1 mode element on a page."
+            mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
+            mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
+            mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
+            mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def paragraphPage() {
-	dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
-		section("paragraph") {
-			paragraph "This us how you should make a paragraph element"
-			paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
-		}
-	}
-}
-
-def iconPage() {
-	dynamicPage(name: "iconPage", title: "Every 'icon' type") { // TODO: finish this
-		section("icon") {
-			icon(name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
-			icon(name: "iconRequired", title: "required:true", required: true, multiple: false)
-			icon(name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
+        section("paragraph") {
+            paragraph "This is how you should make a paragraph element"
+            paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
+        }
+    }
 }
 
 def hrefPage() {
-	dynamicPage(name: "hrefPage", title: "Every 'href' type") {
-		section("page") {
-			href(name: "hrefPage", title: "required:false, multiple:false", required: false, multiple: false, page: "deadEnd")
-			href(name: "hrefPageRequired", title: "required:true", required: true, multiple: false, page: "deadEnd", description: "Don't make hrefs required")
-			href(name: "hrefPageComplete", title: "state:complete", required: false, multiple: false, page: "deadEnd", state: "complete")
-			href(name: "hrefPageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", page: "deadEnd",)
-		}
-		section("external") {
-			href(name: "hrefExternal", title: "required:false, multiple:false", required: false, multiple: false, style: "external", url: "http://smartthings.com/")
-			href(name: "hrefExternalRequired", title: "required:true", required: true, multiple: false, style: "external", url: "http://smartthings.com/", description: "Don't make hrefs required")
-			href(name: "hrefExternalComplete", title: "state:complete", required: false, multiple: true, style: "external", url: "http://smartthings.com/", state: "complete")
-			href(name: "hrefExternalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
-		}
-		section("embedded") {
-			href(name: "hrefEmbedded", title: "required:false, multiple:false", required: false, multiple: false, style: "embedded", url: "http://smartthings.com/")
-			href(name: "hrefEmbeddedRequired", title: "required:true", required: true, multiple: false, style: "embedded", url: "http://smartthings.com/", description: "Don't make hrefs required")
-			href(name: "hrefEmbeddedComplete", title: "state:complete", required: false, multiple: true, style: "embedded", url: "http://smartthings.com/", state: "complete")
-			href(name: "hrefEmbeddedWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
-		}
-	}
+    dynamicPage(name: "hrefPage", title: "Every 'href' variation") {
+        section("stylistic differences") {
+            href(page: "deadEnd", title: "state: 'complete'", description: "gives the appearance of an input that has been filled out", state: "complete")
+            href(page: "deadEnd", title: "with image", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+            href(page: "deadEnd", title: "with image and description", description: "and state: 'complete'", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", state: "complete")
+        }
+        section("functional differences") {
+            href(page: "deadEnd", title: "to a page within the app")
+            href(url: "http://www.google.com", title: "to a url using all defaults")
+            href(url: "http://www.google.com", title: "external: true", description: "takes you outside the app", external: true)
+        }
+    }
 }
 
 def buttonsPage() {
-	dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
-		section("buttons") {
-			buttons(name: "buttons", title: "required:false, multiple:false", required: false, multiple: false, buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-			buttons(name: "buttonsRequired", title: "required:true", required: true, multiple: false, buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-			buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-		}
-		section("Colored Buttons") {
-			buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
-				[label: "complete", action: "bar", backgroundColor: "complete"],
-				[label: "required", action: "bar", backgroundColor: "required"]
-			])
-			buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
-				[label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
-				[label: "fg: #ffac00", action: "foo", color: "#ffac00"],
-				[label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
-			])
-			buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
-				[label: "green", action: "foo", backgroundColor: "green"],
-				[label: "red", action: "foo", backgroundColor: "red"],
-				[label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
-			])
-		}
-	}
+    dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
+        section("Simple Buttons") {
+            paragraph "If there are an odd number of buttons, the last button will span the entire view area."
+            buttons(name: "buttons1", title: "1 button", buttons: [
+                    [label: "foo", action: "foo"]
+            ])
+            buttons(name: "buttons2", title: "2 buttons", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"]
+            ])
+            buttons(name: "buttons3", title: "3 buttons", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"],
+                    [label: "baz", action: "baz"]
+            ])
+            buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"]
+            ])
+        }
+        section("Colored Buttons") {
+            buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
+                    [label: "complete", action: "bar", backgroundColor: "complete"],
+                    [label: "required", action: "bar", backgroundColor: "required"]
+            ])
+            buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
+                    [label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
+                    [label: "fg: #ffac00", action: "foo", color: "#ffac00"],
+                    [label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
+            ])
+            buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
+                    [label: "green", action: "foo", backgroundColor: "green"],
+                    [label: "red", action: "foo", backgroundColor: "red"],
+                    [label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
+            ])
+        }
+    }
 
 }
 
 def imagePage() {
-	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
-		section("image") {
-			image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
-			image(name: "imageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
+        section("image") {
+            image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
+            image(name: "imageWithMultipleImages", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, images: ["https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"])
+        }
+    }
 }
 
 def videoPage() {
-	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish this
-		section("video") {
-			// TODO: update this when there is a videoElement method
-			element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c26321.jpg", video: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c2631f.mp4")
-		}
-	}
+    dynamicPage(name: "videoPage", title: "Every 'video' type") { // TODO: finish this
+        section("video") {
+            // TODO: update this when there is a videoElement method
+            element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://f.cl.ly/items/0w0D1p0K2D0d190F3H3N/Image%202015-12-14%20at%207.57.27%20AM.jpg", video: "http://f.cl.ly/items/3O2L03471l2K3E3l3K1r/Zombie%20Kid%20Likes%20Turtles.mp4")
+        }
+    }
 }
 
 def flattenedPage() {
-	def allSections = []
-	firstPage().sections.each { section ->
-		section.body.each { hrefElement ->
-			if (hrefElement.page != "flattenedPage") {
-				allSections += "${hrefElement.page}"().sections
-			}
-		}
-	}
-	def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
-	flattenedPage.sections = allSections
-	return flattenedPage
+    def allSections = []
+    firstPage().sections[0].body.each { hrefElement ->
+        if (hrefElement.name != "inputPage") {
+            // inputPage is a bunch of hrefs
+            allSections += "${hrefElement.page}"().sections
+        }
+    }
+    // collect the input elements
+    inputPage().sections.each { section ->
+        section.body.each { hrefElement ->
+            allSections += "${hrefElement.page}"().sections
+        }
+    }
+    def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
+    flattenedPage.sections = allSections
+    return flattenedPage
 }
 
 def foo() {
-	dynamicPage(name: "deadEnd") {
-
-	}
+    dynamicPage(name: "deadEnd") {
+        section {  }
+    }
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+    log.debug "Installed with settings: ${settings}"
 
-	initialize()
+    initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+    log.debug "Updated with settings: ${settings}"
 
-	unsubscribe()
-	initialize()
+    unsubscribe()
+    initialize()
 }
 
 def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
+    // TODO: subscribe to attributes, devices, locations, etc.
 }

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -592,7 +592,7 @@ def updated() {
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device
-       		def childDevice = addChildDevice("smartthings", "life360-user", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
+       		def childDevice = addChildDevice("smartthings", "Life360 User", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
             // childDevice.setMemberId(member.id)
         
         	if (childDevice)

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -5,23 +5,23 @@
  *
  */
 definition(
-	name: "LIFX (Connect)",
-	namespace: "smartthings",
-	author: "LIFX",
-	description: "Allows you to use LIFX smart light bulbs with SmartThings.",
-	category: "Convenience",
-	iconUrl: "https://cloud.lifx.com/images/lifx.png",
-	iconX2Url: "https://cloud.lifx.com/images/lifx.png",
-	iconX3Url: "https://cloud.lifx.com/images/lifx.png",
-	oauth: true,
-	singleInstance: true) {
-		appSetting "clientId"
-		appSetting "clientSecret"
-	}
+		name: "LIFX (Connect)",
+		namespace: "smartthings",
+		author: "LIFX",
+		description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+		category: "Convenience",
+		iconUrl: "https://cloud.lifx.com/images/lifx.png",
+		iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+		iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+		oauth: true,
+		singleInstance: true) {
+	appSetting "clientId"
+	appSetting "clientSecret"
+}
 
 
 preferences {
-	page(name: "Credentials", title: "LIFX", content: "authPage", install: false)
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: true)
 }
 
 mappings {
@@ -33,29 +33,29 @@ mappings {
 	path("/test") { action: [ GET: "oauthSuccess" ] }
 }
 
-def getServerUrl() { return "https://graph.api.smartthings.com" }
-def apiURL(path = '/') { return "https://api.lifx.com/v1beta1${path}" }
-def buildRedirectUrl(page) {
-	return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
-}
+def getServerUrl()               { return "https://graph.api.smartthings.com" }
+def getCallbackUrl()             { return "https://graph.api.smartthings.com/oauth/callback"}
+def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
+def getSecretKey()               { return appSettings.secretKey }
+def getClientId()                { return appSettings.clientId }
 
 def authPage() {
-	log.debug "authPage"
+	log.debug "authPage test1"
 	if (!state.lifxAccessToken) {
 		log.debug "no LIFX access token"
 		// This is the SmartThings access token
 		if (!state.accessToken) {
 			log.debug "no access token, create access token"
-			createAccessToken() // predefined method
+			state.accessToken = createAccessToken() // predefined method
 		}
 		def description = "Tap to enter LIFX credentials"
-		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}" // this triggers oauthInit() below
-		log.debug "app id: ${app.id}"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
+//        def redirectUrl = "${apiServerUrl}"
+        log.debug "app id: ${app.id}"
 		log.debug "redirect url: ${redirectUrl}"
-		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:false) {
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
-				// href(url:buildRedirectUrl("test"), title: "Message test")
 			}
 		}
 	} else {
@@ -63,17 +63,15 @@ def authPage() {
 
 		def options = locationOptions() ?: []
 		def count = options.size()
-        def refreshInterval = 3
 
-		return dynamicPage(name:"Credentials", title:"Select devices...", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {
-				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options, submitOnChange: true
 			}
 		}
 	}
 }
 
-
 // OAuth
 
 def oauthInit() {
@@ -112,7 +110,7 @@ def oauthCallback() {
 }
 
 def oauthReceiveToken(redirectUrl = null) {
-
+	// Not sure what redirectUrl is for
 	log.debug "receiveToken - params: ${params}"
 	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
 	def params = [
@@ -135,25 +133,25 @@ def oauthReceiveToken(redirectUrl = null) {
 
 def oauthSuccess() {
 	def message = """
-        <p>Your LIFX Account is now connected to SmartThings!</p>
-        <p>Click 'Done' to finish setup.</p>
-    """
+		<p>Your LIFX Account is now connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
 def oauthFailure() {
 	def message = """
-        <p>The connection could not be established!</p>
-        <p>Click 'Done' to return to the menu.</p>
-    """
+		<p>The connection could not be established!</p>
+		<p>Click 'Done' to return to the menu.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
 def oauthReceivedToken() {
 	def message = """
-        <p>Your LIFX Account is already connected to SmartThings!</p>
-        <p>Click 'Done' to finish setup.</p>
-    """
+		<p>Your LIFX Account is already connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
@@ -161,74 +159,74 @@ def oauthConnectionStatus(message, redirectUrl = null) {
 	def redirectHtml = ""
 	if (redirectUrl) {
 		redirectHtml = """
-            <meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-        """
+			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+		"""
 	}
 
 	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width">
-        <title>SmartThings Connection</title>
-        <style type="text/css">
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 280;
-                padding: 20px;
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 15px;
-            }
-            p {
-                font-size: 1.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                padding: 0 20px;
-                margin-bottom: 0;
-            }
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        ${redirectHtml}
-        </head>
-        <body>
-            <div class="container">
-                <img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
-                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
-                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
-                <p>
-                    ${message}
-                </p>
-            </div>
-        </body>
-        </html>
-    """
+		<!DOCTYPE html>
+		<html>
+		<head>
+		<meta name="viewport" content="width=device-width">
+		<title>SmartThings Connection</title>
+		<style type="text/css">
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				width: 280;
+				padding: 20px;
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+			}
+			img:nth-child(2) {
+				margin: 0 15px;
+			}
+			p {
+				font-size: 1.2em;
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				padding: 0 20px;
+				margin-bottom: 0;
+			}
+			span {
+				font-family: 'Swiss 721 W01 Light';
+			}
+		</style>
+		${redirectHtml}
+		</head>
+		<body>
+			<div class="container">
+				<img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+				<p>
+					${message}
+				</p>
+			</div>
+		</body>
+		</html>
+	"""
 	render contentType: 'text/html', data: html
 }
 
@@ -239,7 +237,6 @@ String toQueryString(Map m) {
 // App lifecycle hooks
 
 def installed() {
-	enableCallback() // wtf does this do?
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -251,7 +248,6 @@ def installed() {
 
 // called after settings are changed
 def updated() {
-	enableCallback() // not sure what this does
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -305,27 +301,36 @@ def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
 			state.remove("lifxAccessToken")
 			options.logObject.warn "Access token is not valid"
 		}
-		return options.errerReturn
+		return options.errorReturn
 	} catch (java.net.SocketTimeoutException e) {
 		options.logObject.warn "Connection timed out, not much we can do here"
-		return options.errerReturn
+		return options.errorReturn
 	}
 }
 
 def apiGET(path) {
-	httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
-		logResponse(response)
-		return response
+	try {
+		httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
 	}
 }
 
 def apiPUT(path, body = [:]) {
-	log.debug("Beginning API PUT: ${path}, ${body}")
-	httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
-		logResponse(response)
-		return response
-	}
-}
+	try {
+		log.debug("Beginning API PUT: ${path}, ${body}")
+		httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
+	}}
 
 def devicesList(selector = '') {
 	logErrors([]) {
@@ -340,12 +345,12 @@ def devicesList(selector = '') {
 }
 
 Map locationOptions() {
-
 	def options = [:]
 	def devices = devicesList()
 	devices.each { device ->
 		options[device.location.id] = device.location.name
 	}
+	log.debug("Locations: ${options}")
 	return options
 }
 
@@ -359,28 +364,32 @@ def updateDevices() {
 		state.devices = [:]
 	}
 	def devices = devicesInLocation()
-	def deviceIds = devices*.id
+	def selectors = []
+
+	log.debug("All selectors: ${selectors}")
+
 	devices.each { device ->
 		def childDevice = getChildDevice(device.id)
+		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.capabilities}")
+			log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
-					level: sprintf("%f", (device.brightness ?: 1) * 100),
+					level: Math.round((device.brightness ?: 1) * 100),
 					switch: device.connected ? device.power : "unreachable",
 					colorTemperature: device.color.kelvin
 			]
-			if (device.capabilities.has_color) {
+			if (device.product.capabilities.has_color) {
 				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
 				data["hue"] = device.color.hue / 3.6
 				data["saturation"] = device.color.saturation * 100
-				childDevice = addChildDevice("smartthings", "LIFX Color Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
 			} else {
-				childDevice = addChildDevice("smartthings", "LIFX White Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
 		}
 	}
-	getChildDevices().findAll { !deviceIds.contains(it.deviceNetworkId) }.each {
+	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
 		deleteChildDevice(it.deviceNetworkId)
 	}
@@ -392,4 +401,4 @@ def refreshDevices() {
 	getChildDevices().each { device ->
 		device.refresh()
 	}
-}
+}

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -49,6 +49,7 @@ preferences {
 	section("Via a push notification and/or an SMS message"){
         input("recipients", "contact", title: "Send notifications to") {
             input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+            paragraph "If outside the US please make sure to enter the proper country code"
             input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
         }
 	}

smartapps/smartthings/speaker-control.src/speaker-control.groovy

@@ -10,24 +10,24 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Control
+ *  Speaker Control
  *
  *  Author: SmartThings
  *
  *  Date: 2013-12-10
  */
 definition(
-    name: "Sonos Control",
+    name: "Speaker Control",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play or pause your Sonos when certain actions take place in your home.",
+    description: "Play or pause your Speaker when certain actions take place in your home.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Control your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
 			input "starting", "time", title: "Starting", required: false
@@ -81,7 +81,7 @@ def mainPage() {
 			]
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "Sonos music player", required: true
+			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false

smartapps/smartthings/speaker-mood-music.src/speaker-mood-music.groovy

@@ -10,7 +10,7 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Mood Music
+ *  Speaker Mood Music
  *
  *  Author: SmartThings
  *  Date: 2014-02-12
@@ -65,7 +65,7 @@ private saveSelectedSong() {
 }
 
 definition(
-    name: "Sonos Mood Music",
+    name: "Speaker Mood Music",
     namespace: "smartthings",
     author: "SmartThings",
     description: "Plays a selected song or station.",
@@ -75,7 +75,7 @@ definition(
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a selected song or station on your Sonos when something happens", nextPage: "chooseTrack", uninstall: true)
+	page(name: "mainPage", title: "Play a selected song or station on your Speaker when something happens", nextPage: "chooseTrack", uninstall: true)
 	page(name: "chooseTrack", title: "Select a song", install: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -125,7 +125,7 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume", description: "0-100%", required: false

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Custom Message
+ *  Speaker Custom Message
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-	name: "Sonos Notify with Sound",
+	name: "Speaker Notify with Sound",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Play a sound or custom message through your Sonos when the mode changes or other events occur.",
+	description: "Play a sound or custom message through your Speaker when the mode changes or other events occur.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a message on your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play a message on your Speaker when something happens", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -75,8 +75,8 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section{
-			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Custom Message", options: [
-				"Custom Message",
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
+				//"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,10 +89,10 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			input "message","text",title:"Play this message", required:false, multiple: false
+			//input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after notification", required: false, defaultValue: true
@@ -409,12 +409,13 @@ private loadText() {
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
 		default:
-			if (message) {
+			/*if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}
+			}*/
+			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}
 }

smartapps/smartthings/speaker-weather-forecast.src/speaker-weather-forecast.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Weather Forecast
+ *  Speaker Weather Forecast
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-    name: "Sonos Weather Forecast",
+    name: "Speaker Weather Forecast",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play a weather report through your Sonos when the mode changes or other events occur",
+    description: "Play a weather report through your Speaker when the mode changes or other events occur",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play the weather report on your sonos", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play the weather report on your speaker", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -85,7 +85,7 @@ def mainPage() {
 			)
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after weather report finishes", required: false, defaultValue: true

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -78,7 +78,7 @@ def firstPage()
 		def motionsDiscovered = motionsDiscovered()
 		def lightSwitchesDiscovered = lightSwitchesDiscovered()
 
-		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: selectedSwitches != null || selectedMotions != null || selectedLightSwitches != null) {
+		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
 			section("Select a device...") {
 				input "selectedSwitches", "enum", required:false, title:"Select Wemo Switches \n(${switchesDiscovered.size() ?: 0} found)", multiple:true, options:switchesDiscovered
 				input "selectedMotions", "enum", required:false, title:"Select Wemo Motions \n(${motionsDiscovered.size() ?: 0} found)", multiple:true, options:motionsDiscovered