MSA-753: Sets mode to home when somebody is home, away when everyone is gone and home / night (optionally) depending on sunrise / sunset.

[DVCSMP-1338] commenting out unused variables

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -1,12 +1,9 @@
-/**
- *  Keen Home Smart Vent
- *
- *  Author: Keen Home
- *  Date: 2015-06-23
- */
+// keen home smart vent
+// http://www.keenhome.io
+// SmartThings Device Handler v1.0.0
 
 metadata {
-    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Gregg Altschul") {
+    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Keen Home") {
         capability "Switch Level"
         capability "Switch"
         capability "Configuration"
@@ -21,6 +18,7 @@ metadata {
         command "getBattery"
         command "getTemperature"
         command "setZigBeeIdTile"
+        command "clearObstruction"
 
         fingerprint endpoint: "1",
         profileId: "0104",
@@ -42,9 +40,10 @@ metadata {
     // UI tile definitions
     tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
-            state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
-            state "obstructed", action: "switch.off", icon:"st.vents.vent-closed", backgroundColor:"#ff0000"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
+            state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
         }
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
             state "level", action:"switch level.setLevel"
@@ -206,12 +205,12 @@ private Map makeOnOffResult(rawValue) {
 
 private Map makeLevelResult(rawValue) {
     def linkText = getLinkText(device)
-    // log.debug "rawValue: ${rawValue}"
     def value = Integer.parseInt(rawValue, 16)
     def rangeMax = 254
 
+    // catch obstruction level
     if (value == 255) {
-        log.debug "obstructed"
+        log.debug "${linkText} is obstructed"
         // Just return here. Once the vent is power cycled
         // it will go back to the previous level before obstruction.
         // Therefore, no need to update level on the display.
@@ -220,24 +219,9 @@ private Map makeLevelResult(rawValue) {
             value: "obstructed",
             descriptionText: "${linkText} is obstructed. Please power cycle."
         ]
-    } else if ( device.currentValue("switch") == "obstructed" &&
-                value == 254)  {
-        // When the device is reset after an obstruction, the switch
-        // state will be obstructed and the value coming from the device
-        // will be 254. Since we're not using heating/cooling mode from
-        // the device type handler, we need to bump it down to the lower
-        // (cooling) range
-        sendEvent(makeOnOffResult(1)) // clear the obstructed switch state
-        value = rangeMax
     }
-    // else if (device.currentValue("switch") == "off") {
-    //     sendEvent(makeOnOffResult(1)) // turn back on if in off state
-    // }
 
-
-    // log.debug "pre-value: ${value}"
     value = Math.floor(value / rangeMax * 100)
-    // log.debug "post-value: ${value}"
 
     return [
         name: "level",
@@ -327,35 +311,79 @@ private def makeSerialResult(serial) {
         value: serial,
         descriptionText: "${linkText} has serial ${serial}" ]
 }
-/**** COMMAND METHODS ****/
-// def mfgCode() {
-// 	 ["zcl mfg-code 0x115B", "delay 200"]
-// }
 
+// takes a level from 0 to 100 and translates it to a ZigBee move to level with on/off command
+private def makeLevelCommand(level) {
+    def rangeMax = 254
+    def scaledLevel = Math.round(level * rangeMax / 100)
+    log.debug "scaled level for ${level}%: ${scaledLevel}"
+
+    // convert to hex string and pad to two digits
+    def hexLevel = new BigInteger(scaledLevel.toString()).toString(16).padLeft(2, '0')
+
+    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${hexLevel} 0000}"
+}
+
+/**** COMMAND METHODS ****/
 def on() {
-    log.debug "on()"
+    def linkText = getLinkText(device)
+    log.debug "open ${linkText}"
+
+    // only change the state if the vent is not obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot open because ${linkText} is obstructed")
+        return
+    }
+
     sendEvent(makeOnOffResult(1))
     "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
 
 def off() {
-    log.debug "off()"
+    def linkText = getLinkText(device)
+    log.debug "close ${linkText}"
+
+    // only change the state if the vent is not obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot close because ${linkText} is obstructed")
+        return
+    }
+
     sendEvent(makeOnOffResult(0))
     "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
-// does this work?
-def toggle() {
-    log.debug "toggle()"
+def clearObstruction() {
+    def linkText = getLinkText(device)
+    log.debug "attempting to clear ${linkText} obstruction"
 
-    "st cmd 0x${device.deviceNetworkId} 1 6 2 {}"
+    sendEvent([
+        name: "switch",
+        value: "clearing",
+        descriptionText: "${linkText} is clearing obstruction"
+    ])
+
+    // send a move command to ensure level attribute gets reset for old, buggy firmware
+    // then send a reset to factory defaults
+    // finally re-configure to ensure reports and binding is still properly set after the rtfd
+    [
+        makeLevelCommand(device.currentValue("level")), "delay 500",
+        "st cmd 0x${device.deviceNetworkId} 1 0 0 {}", "delay 5000"
+    ] + configure()
 }
 
 def setLevel(value) {
     log.debug "setting level: ${value}"
-
     def linkText = getLinkText(device)
 
+    // only change the level if the vent is not obstructed
+    def currentState = device.currentValue("switch")
+
+    if (currentState == "obstructed") {
+        log.error("cannot set level because ${linkText} is obstructed")
+        return
+    }
+
     sendEvent(name: "level", value: value)
     if (value > 0) {
         sendEvent(name: "switch", value: "on", descriptionText: "${linkText} is on by setting a level")
@@ -363,29 +391,26 @@ def setLevel(value) {
     else {
         sendEvent(name: "switch", value: "off", descriptionText: "${linkText} is off by setting level to 0")
     }
-    def rangeMax = 254
-    def computedLevel = Math.round(value * rangeMax / 100)
-    log.debug "computedLevel: ${computedLevel}"
 
-    def level = new BigInteger(computedLevel.toString()).toString(16)
-    log.debug "level: ${level}"
-
-    if (level.size() < 2){
-        level = '0' + level
-    }
-
-    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 0000}"
+    makeLevelCommand(value)
 }
 
-
 def getOnOff() {
     log.debug "getOnOff()"
 
+    // disallow on/off updates while vent is obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot update open/close status because ${getLinkText(device)} is obstructed")
+        return []
+    }
+
     ["st rattr 0x${device.deviceNetworkId} 1 0x0006 0"]
 }
 
 def getPressure() {
     log.debug "getPressure()"
+
+    // using a Keen Home specific attribute in the pressure measurement cluster
     [
         "zcl mfg-code 0x115B", "delay 200",
         "zcl global read 0x0403 0x20", "delay 200",
@@ -395,12 +420,13 @@ def getPressure() {
 
 def getLevel() {
     log.debug "getLevel()"
-    // rattr = read attribute
-    // 0x${} = device net id
-    // 1 = endpoint
-    // 8 = cluster id (level control, in this case)
-    // 0 = attribute within cluster
-    // sendEvent(name: "level", value: value)
+
+    // disallow level updates while vent is obstructed
+    if (device.currentValue("switch") == "obstructed") {
+        log.error("cannot update level status because ${getLinkText(device)} is obstructed")
+        return []
+    }
+
     ["st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"]
 }
 
@@ -425,78 +451,59 @@ def setZigBeeIdTile() {
         name: "zigbeeId",
         value: device.zigbeeId,
         descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ])
-	return [
+    return [
         name: "zigbeeId",
         value: device.zigbeeId,
         descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ]
 }
 
 def refresh() {
-	getOnOff() +
+    getOnOff() +
     getLevel() +
     getTemperature() +
     getPressure() +
     getBattery()
 }
 
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
 def configure() {
     log.debug "CONFIGURE"
-    log.debug "zigbeeId: ${device.hub.zigbeeId}"
 
+    // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()
 
     def configCmds = [
-        // binding commands
+        // bind reporting clusters to hub
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500",
-        
-        // configure report commands
-        // [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500"
 
-        // mike 2015/06/22: preconfigured; see tech spec
+        // configure report commands
+        // zcl global send-me-a-report [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
+
+        // report with these parameters is preconfigured in firmware, can be overridden here
         // vent on/off state - type: boolean, change: 1
         // "zcl global send-me-a-report 6 0 0x10 5 60 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // mike 2015/06/22: preconfigured; see tech spec
+        // report with these parameters is preconfigured in firmware, can be overridden here
         // vent level - type: int8u, change: 1
         // "zcl global send-me-a-report 8 0 0x20 5 60 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // mike 2015/06/22: temp and pressure reports are preconfigured, but
-        //   we'd like to override their settings for our own purposes
+        // report with these parameters is preconfigured in firmware, can be overridden here
         // temperature - type: int16s, change: 0xA = 10 = 0.1C
-        "zcl global send-me-a-report 0x0402 0 0x29 10 60 {0A00}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+        // "zcl global send-me-a-report 0x0402 0 0x29 60 60 {0A00}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // mike 2015/06/22: use new custom pressure attribute
-        // pressure - type: int32u, change: 1 = 0.1Pa
-        "zcl mfg-code 0x115B", "delay 200",
-        "zcl global send-me-a-report 0x0403 0x20 0x22 10 60 {010000}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500"
+        // report with these parameters is preconfigured in firmware, can be overridden here
+        // keen home custom pressure (tenths of Pascals) - type: int32u, change: 1 = 0.1Pa
+        // "zcl mfg-code 0x115B", "delay 200",
+        // "zcl global send-me-a-report 0x0403 0x20 0x22 60 60 {010000}", "delay 200",
+        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // mike 2015/06/22: preconfigured; see tech spec
+        // report with these parameters is preconfigured in firmware, can be overridden here
         // battery - type: int8u, change: 1
         // "zcl global send-me-a-report 1 0x21 0x20 60 3600 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -0,0 +1,163 @@
+/**
+ *  PlantLink
+ *
+ *  This device type takes sensor data and converts it into a json packet to send to myplantlink.com
+ *  where its values will be computed for soil and plant type to show user readable values of how your
+ *  specific plant is doing.
+ *
+ *
+ *  Copyright 2015 Oso Technologies
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+import groovy.json.JsonBuilder
+
+metadata {
+    definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
+        capability "Sensor"
+
+        command "setStatusIcon"
+        command "setPlantFuelLevel"
+        command "setBatteryLevel"
+        command "setInstallSmartApp"
+
+        attribute "plantStatus","string"
+        attribute "plantFuelLevel","number"
+        attribute "linkBatteryLevel","string"
+        attribute "installSmartApp","string"
+
+        fingerprint profileId: "0104", inClusters: "0000,0001,0B04"
+    }
+
+    simulator {
+        status "battery": "read attr - raw: C0720100010A000021340A, dni: C072, endpoint: 01, cluster: 0001, size: 0A, attrId: 0000, encoding: 21, value: 0a34"
+        status "moisture": "read attr - raw: C072010B040A0001290000, dni: C072, endpoint: 01, cluster: 0B04, size: 0A, attrId: 0100, encoding: 29, value: 0000"
+    }
+
+    tiles {
+        standardTile("Title", "device.label") {
+            state("label", label:'PlantLink ${device.label}')
+        }
+
+        valueTile("plantMoistureTile", "device.plantFuelLevel", width: 1, height: 1) {
+            state("plantMoisture", label: '${currentValue}% Moisture')
+        }
+
+        valueTile("plantStatusTextTile", "device.plantStatus", decoration: "flat", width: 2, height: 2) {
+            state("plantStatusTextTile", label:'${currentValue}')
+        }
+
+        valueTile("battery", "device.linkBatteryLevel" ) {
+            state("battery", label:'${currentValue}% battery')
+        }
+        
+        valueTile("installSmartApp","device.installSmartApp", decoration: "flat", width: 3, height: 1) {
+        	state "needSmartApp", label:'Please install SmartApp "Required PlantLink Connector"', defaultState:true
+            state "connectedToSmartApp", label:'Connected to myplantlink.com'
+        }
+
+        main "plantStatusTextTile"
+        details(['plantStatusTextTile', "plantMoistureTile", "battery", "installSmartApp"])
+    }
+}
+
+def setStatusIcon(value){
+    def status = ''
+    switch (value) {
+    	case '0':
+	        status = 'Needs Water'
+            break
+    	case '1':
+        	status = 'Dry'
+            break
+    	case '2':
+   		case '3':
+        	status = 'Good'
+            break
+        case '4':
+        	status = 'Too Wet'
+            break
+    	case 'No Soil':
+        	status = 'Too Dry'
+        	setPlantFuelLevel(0)
+            break
+    	case 'Recently Watered':
+        	status = 'Watered'
+            setPlantFuelLevel(100)
+    		break
+    	case 'Low Battery':
+        	status = 'Low Battery'
+    		break
+    	case 'Waiting on First Measurement':
+	        status = 'Calibrating'
+            break
+    	default:
+        	status = "?"
+            break
+    }
+    sendEvent("name":"plantStatus", "value":status, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setPlantFuelLevel(value){
+    sendEvent("name":"plantFuelLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)	
+}
+
+def setBatteryLevel(value){
+    sendEvent("name":"linkBatteryLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)
+}
+
+def setInstallSmartApp(value){
+	sendEvent("name":"installSmartApp", "value":value)
+}
+
+def parse(String description) {
+
+	def description_map = parseDescriptionAsMap(description)
+    def event_name = ""
+    def measurement_map = [
+            type: "link",
+            signal: "0x00",
+            zigbeedeviceid: device.zigbeeId,
+            created: new Date().time /1000 as int
+    ]
+    if (description_map.cluster == "0000"){
+    	/* version number, not used */
+        
+    } else if (description_map.cluster == "0001"){
+        /* battery voltage in mV (device needs minimium 2.1v to run) */
+        log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
+        event_name = "battery_status"
+        measurement_map["battery"] = "0x${description_map.value}"
+        
+    } else if (description_map.cluster == "0B04"){
+        /* raw moisture reading (needs to be sent to plantlink for soil/plant type conversion) */
+        log.debug "PlantLink - id ${device.zigbeeId}  raw moisture ${description_map.value}"
+        measurement_map["moisture"] = "0x${description_map.value}"
+        event_name = "moisture_status"
+        
+    } else{
+        log.debug "PlantLink - id ${device.zigbeeId} Unknown '${description}'"
+        return
+    }
+    
+    def json_builder = new JsonBuilder(measurement_map)
+    def result = createEvent(name: event_name, value: json_builder.toString())
+    return result
+}
+
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -24,6 +24,8 @@ metadata {
 		capability "Battery"
 
 		attribute "tamper", "enum", ["detected", "clear"]
+		attribute "batteryStatus", "string"
+		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 	}
@@ -63,6 +65,19 @@ metadata {
 		status "wake up" : "command: 8407, payload: "
 	}
 
+	preferences {
+		input description: "Please consult AEOTEC MULTISENSOR 6 operating manual for advanced setting options. You can skip this configuration to use default settings",
+				title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
+
+		input "motionDelayTime", "enum", title: "Motion Sensor Delay Time",
+				options: ["20 seconds", "40 seconds", "1 minute", "2 minutes", "3 minutes", "4 minutes"], defaultValue: "${motionDelayTime}", displayDuringSetup: true
+
+		input "motionSensitivity", "enum", title: "Motion Sensor Sensitivity", options: ["normal","maximum","minimum"], defaultValue: "${motionSensitivity}", displayDuringSetup: true
+
+		input "reportInterval", "enum", title: "Sensors Report Interval",
+				options: ["8 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${reportInterval}", displayDuringSetup: true
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
@@ -85,53 +100,78 @@ metadata {
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
+
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
 		}
+
+		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
+			state "ultravioletIndex", label:'${currentValue} UV index', unit:""
+		}
+
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
-		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery"])
+		valueTile("batteryStatus", "device.batteryStatus", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "batteryStatus", label:'${currentValue}', unit:""
+		}
+
+		valueTile("powerSupply", "device.powerSupply", height: 2, width: 2, decoration: "flat") {
+			state "powerSupply", label:'${currentValue} powered', backgroundColor:"#ffffff"
+		}
+
+		main(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex"])
+		details(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex", "batteryStatus"])
 	}
 }
 
-def updated()
-{
-	if (state.sec && !isConfigured()) {
-		// in case we miss the SCSR
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
+
+	if (device.latestValue("powerSupply") == "USB Cable") {  //case1: USB powered
 		response(configure())
+	} else if (device.latestValue("powerSupply") == "Battery") {  //case2: battery powered
+		// setConfigured("false") is used by WakeUpNotification
+		setConfigured("false") //wait until the next time device wakeup to send configure command after user change preference
+	} else { //case3: power source is not identified, ask user to properly pair the sensor again
+		log.warn "power source is not identified, check it sensor is powered by USB, if so > configure()"
+		def request = []
+		request << zwave.configurationV1.configurationGet(parameterNumber: 101)
+		response(commands(request))
 	}
 }
 
-def parse(String description)
-{
+def parse(String description) {
+	log.debug "parse() >> description: $description"
 	def result = null
 	if (description.startsWith("Err 106")) {
-		state.sec = 0
+		log.debug "parse() >> Err 106"
 		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
 	} else if (description != "updated") {
+		log.debug "parse() >> zwave.parse(description)"
 		def cmd = zwave.parse(description, [0x31: 5, 0x30: 2, 0x84: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
 	}
-	log.debug "Parsed '${description}' to ${result.inspect()}"
+	log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
 	return result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
+//this notification will be sent only when device is battery powered
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
-
+	def cmds = []
 	if (!isConfigured()) {
-		// we're still in the process of configuring a newly joined device
 		log.debug("late configure")
-		result += response(configure())
+		result << response(configure())
 	} else {
-		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		result << response(cmds)
 	}
 	result
 }
@@ -149,10 +189,29 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-	response(configure())
+	log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
+	state.sec = 1
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
+	state.sec = 1
+	log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
+	def result = [createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true)]
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.info "Executing zwaveEvent 72 (ManufacturerSpecificV2) : 05 (ManufacturerSpecificReport) with cmd: $cmd"
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
@@ -162,11 +221,14 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 		map.value = cmd.batteryLevel
 	}
 	state.lastbatt = now()
-	createEvent(map)
+	result << createEvent(map)
+	if (device.latestValue("powerSupply") != "USB Cable"){
+		result << createEvent(name: "batteryStatus", value: "${map.value} % battery", displayed: false)
+	}
+	result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
-{
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
 	def map = [:]
 	switch (cmd.sensorType) {
 		case 1:
@@ -208,7 +270,6 @@ def motionEvent(value) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	setConfigured()
 	motionEvent(cmd.sensorValue)
 }
 
@@ -225,47 +286,112 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 				result << createEvent(name: "tamper", value: "clear", displayed: false)
 				break
 			case 3:
-				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was moved")
+				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was tampered")
 				break
 			case 7:
 				result << motionEvent(1)
 				break
 		}
 	} else {
+		log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
 		result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
 	}
 	result
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport: $cmd"
+	def result = []
+	def value
+	if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 0) {
+		value = "USB Cable"
+		if (!isConfigured()) {
+			log.debug("ConfigurationReport: configuring device")
+			result << response(configure())
+		}
+		result << createEvent(name: "batteryStatus", value: value, displayed: false)
+		result << createEvent(name: "powerSupply", value: value, displayed: false)
+	}else if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 1) {
+		value = "Battery"
+		result << createEvent(name: "powerSupply", value: value, displayed: false)
+	} else if (cmd.parameterNumber == 101){
+		result << response(configure())
+	}
+	result
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "General zwaveEvent cmd: ${cmd}"
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
-	if (device.device.rawDescription =~ /98/ && !state.sec) {
-		log.debug "Multi 6 not sending configure until secure"
-		return []
-	}
-	log.debug "Multi 6 configure()"
-	def request = [
-		// send no-motion report 20 seconds after motion stops
-		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 20),
+	log.debug "${device.displayName} is configuring its settings"
+	def request = []
 
-		// report every 8 minutes (threshold reports don't work on battery power)
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
+	//1. set association groups for hub
+	request << zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId)
 
-		// report automatically on threshold change
-		zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1),
+	request << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId)
+
+	//2. automatic report flags
+	// param 101 -103 [4 bytes] 128: light sensor, 64 humidity, 32 temperature sensor, 2 ultraviolet sensor, 1 battery sensor -> send command 227 to get all reports
+	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 226) //association group 1
+
+	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1) //association group 2
+
+	//3. no-motion report x seconds after motion stops (default 20 secs)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: timeOptionValueMap[motionDelayTime] ?: 20)
+
+	//4. motionSensitivity 3 levels: 64-normal (default), 127-maximum, 0-minimum
+	request << zwave.configurationV1.configurationSet(parameterNumber: 6, size: 1,
+			scaledConfigurationValue:
+					motionSensitivity == "normal" ? 64 :
+							motionSensitivity == "maximum" ? 127 :
+									motionSensitivity == "minimum" ? 0 : 64)
+
+	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+
+	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
+
+	//6. report automatically on threshold change
+	request << zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1)
+
+	//7. query sensor data
+	request << zwave.batteryV1.batteryGet()
+	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
+	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x1B) //ultravioletIndex
+
+	setConfigured("true")
 
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C),
-    ]
 	commands(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
-private setConfigured() {
-	updateDataValue("configured", "true")
+private def getTimeOptionValueMap() { [
+		"20 seconds" : 20,
+		"40 seconds" : 40,
+		"1 minute"   : 60,
+		"2 minutes"  : 2*60,
+		"3 minutes"  : 3*60,
+		"4 minutes"  : 4*60,
+		"5 minutes"  : 5*60,
+		"8 minutes"  : 8*60,
+		"15 minutes" : 15*60,
+		"30 minutes" : 30*60,
+		"1 hours"    : 1*60*60,
+		"6 hours"    : 6*60*60,
+		"12 hours"   : 12*60*60,
+		"18 hours"   : 6*60*60,
+		"24 hours"   : 24*60*60,
+]}
+
+private setConfigured(configure) {
+	updateDataValue("configured", configure)
 }
 
 private isConfigured() {
@@ -281,5 +407,6 @@ private command(physicalgraph.zwave.Command cmd) {
 }
 
 private commands(commands, delay=200) {
+	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -15,6 +15,7 @@
  *	Author: SmartThings
  *	Date: 2013-12-04
  */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 metadata {
 	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
@@ -25,7 +26,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -38,168 +38,63 @@ metadata {
 	}
 
 	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		
-
-		main(["switch"])
-		details(["switch", "level", "levelSliderControl", "refresh"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
 }
 
 // Parse incoming device messages to generate events
-
 def parse(String description) {
-	log.trace description
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace msg
-		log.trace "data: $msg.data"
-        
-        if(description?.endsWith("0100") ||description?.endsWith("1001"))
-        {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getKnownDescription(description)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
         }
-        
-        if(description?.endsWith("0000") || description?.endsWith("1000"))
-        {
-        	def result = createEvent(name: "switch", value: "off")
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
-	}
-    
-    
-   if (description?.startsWith("read attr")) {
-   		
-        log.debug description[-2..-1]
-        def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-        
-		sendEvent( name: "level", value: i )
     }
-    
-	
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
 }
 
 def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-    
-    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
-    }
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-    
-	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
- 
-}
-
-def refresh() {
-    // Schedule poll every 1 min
-    //schedule("0 */1 * * * ?", poll)
-    //poll()
-    
-    [
-	"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0"
-    ]
+    zigbee.on()
 }
 
 def setLevel(value) {
-	log.trace "setLevel($value)"
-	def cmds = []
+    zigbee.setLevel(value)
+}
 
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {0000 0000}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-	sendEvent(name: "level", value: value)
-    def level = hex(value * 255/100)
-	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
-
-	//log.debug cmds
-	cmds
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
-
-	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [	
-  
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
-        
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
-        
-        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def uninstalled() {
-
-	log.debug "uninstalled()"
-		
-	response("zcl rftd")
- 
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -0,0 +1,71 @@
+/**
+ *  Ecobee Sensor
+ *
+ *  Copyright 2015 Juan Risso
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Sensor"
+		capability "Temperature Measurement"
+		capability "Motion Sensor"
+		capability "Refresh"
+		capability "Polling"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+			)
+		}
+
+		standardTile("motion", "device.motion") {
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["temperature","motion"])
+		details(["temperature","motion","refresh"])
+	}
+}
+
+def refresh() {
+	log.debug "refresh..."
+	poll()
+}
+
+void poll() {
+	log.debug "Executing 'poll' using parent SmartApp"
+	parent.pollChildren(this)
+}
+
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -22,31 +22,31 @@ metadata {
 		capability "Polling"
 		capability "Sensor"
         capability "Refresh"
-        
+
         command "generateEvent"
         command "raiseSetpoint"
         command "lowerSetpoint"
         command "resumeProgram"
         command "switchMode"
-        
+
         attribute "thermostatSetpoint","number"
         attribute "thermostatStatus","string"
 	}
 
 	simulator { }
- 
-		tiles {
+
+    	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
@@ -54,27 +54,27 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"  
-            state "updating", label:"Working", icon: "st.secondary.secondary"  
+			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
 			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"           
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
 			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
-        standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"raiseSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-up"
+		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-        valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+			state "thermostatSetpoint", label:'${currentValue}°'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
-		}    
+		}
 		standardTile("downButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"lowerSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-down"
-		}        
+			state "setpoint", action:"lowerSetpoint", icon:"st.thermostat.thermostat-down"
+		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
@@ -91,218 +91,196 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", label:'Resume Program', action:"device.resumeProgram", icon:"st.sonos.play-icon"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		main "temperature"
-        details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+	}
+
+	preferences {
+		input "holdType", "enum", title: "Hold Type", description: "When changing temperature, use Temporary (Until next transition) or Permanent hold (default)", required: false, options:["Temporary", "Permanent"]
 	}
 
 }
 
-/*
-    
-    preferences {
-		input "highTemperature", "number", title: "Auto Mode High Temperature:", defaultValue: 80
-		input "lowTemperature", "number", title: "Auto Mode Low Temperature:", defaultValue: 70
-        input name: "holdType", type: "enum", title: "Hold Type", description: "When changing temperature, use Temporary or Permanent hold", required: true, options:["Temporary", "Permanent"]
-  	}
-    
-*/
-
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	// TODO: handle '' attribute
- 
+
 }
 
-def refresh()
-{
-  log.debug "refresh called"
-  poll()
-  log.debug "refresh ended"
+def refresh() {
+	log.debug "refresh called"
+	poll()
+	log.debug "refresh ended"
 }
- 
-def go()
-{
-  log.debug "before:go tile tapped"
-  poll()
-  log.debug "after"
-}
- 
+
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	
+
 	def results = parent.pollChild(this)
-	parseEventData(results)
-	generateStatusEvent()
+	generateEvent(results) //parse received message from parent
 }
- 
-def parseEventData(Map results)
-{
+
+def generateEvent(Map results) {
 	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
- 
+	if(results) {
+		results.each { name, value ->
+
 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
-				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
-		}                                   									
-		generateSetpointEvent ()  
-        generateStatusEvent ()
-	}
-}
+			def isChange = false
+			def isDisplayed = true
+			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
+			handlerName: name]
 
-void generateEvent(Map results)
-{
-	log.debug "parsing data $results"
-	if(results)
-	{
-		results.each { name, value -> 
-        
- 			def linkText = getLinkText(device)
-            def isChange = false
-            def isDisplayed = true
-            
-            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
 				isChange = isTemperatureStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                   
-				sendEvent(
-					name: name,
-					value: value,
-					unit: "F",
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)                                    									 
-            }
-            else {
-            	isChange = isStateChange(device, name, value.toString())
-                isDisplayed = isChange
-                
-                sendEvent(
-					name: name,
-					value: value.toString(),
-					linkText: linkText,
-					descriptionText: getThermostatDescriptionText(name, value, linkText),
-					handlerName: name,
-					isStateChange: isChange,
-					displayed: isDisplayed)
-                    
-            }
+				isDisplayed = isChange
+				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+			} else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else {
+				isChange = isStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
+			}
+			sendEvent(event)
 		}
-		generateSetpointEvent () 
-        generateStatusEvent()
+		generateSetpointEvent ()
+		generateStatusEvent ()
 	}
 }
- 
-private getThermostatDescriptionText(name, value, linkText)
-{
-	if(name == "temperature")
-	{
-		return "$linkText was $value°F"
+
+//return descriptionText to be shown on mobile activity feed
+private getThermostatDescriptionText(name, value, linkText) {
+	if(name == "temperature") {
+		return "$linkText temperature is $value°F"
+
+	} else if(name == "heatingSetpoint") {
+		return "heating setpoint is $value°F"
+
+	} else if(name == "coolingSetpoint"){
+		return "cooling setpoint is $value°F"
+
+	} else if (name == "thermostatMode") {
+		return "thermostat mode is ${value}"
+
+	} else if (name == "thermostatFanMode") {
+		return "thermostat fan mode is ${value}"
+
+	} else {
+		return "${name} = ${value}"
 	}
-	else if(name == "heatingSetpoint")
-	{
-		return "latest heating setpoint was $value°F"
+}
+
+void setHeatingSetpoint(setpoint) {
+	setHeatingSetpoint(setpoint.toDouble())
+}
+
+void setHeatingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = setpoint
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	//enforce limits of heatingSetpoint
+	if (heatingSetpoint > 79) {
+		heatingSetpoint = 79
+	} else if (heatingSetpoint < 45) {
+		heatingSetpoint = 45
 	}
-	else if(name == "coolingSetpoint")
-	{
-		return "latest cooling setpoint was $value°F"
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		coolingSetpoint = heatingSetpoint
+	}
+
+	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
 	}
-    else if (name == "thermostatMode")
-    {
-        return "thermostat mode is ${value}"
-    }
-    else
-    {
-        return "${name} = ${value}"
-    }
 }
 
-
-void setHeatingSetpoint(degreesF) {
-	setHeatingSetpoint(degreesF.toDouble())
+void setCoolingSetpoint(setpoint) {
+	setCoolingSetpoint(setpoint.toDouble())
 }
 
-void setHeatingSetpoint(Double degreesF) {
-	log.debug "setHeatingSetpoint({$degreesF})"
-	sendEvent("name":"heatingSetpoint", "value":degreesF)
-	Double coolingSetpoint = device.currentValue("coolingSetpoint")
-	log.debug "coolingSetpoint: $coolingSetpoint"
-	parent.setHold(this, degreesF, coolingSetpoint)
+void setCoolingSetpoint(Double setpoint) {
+//    def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
+	def coolingSetpoint = setpoint
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	if (coolingSetpoint > 92) {
+		coolingSetpoint = 92
+	} else if (coolingSetpoint < 65) {
+		coolingSetpoint = 65
+	}
+
+	//enforce limits of heatingSetpoint vs coolingSetpoint
+	if (heatingSetpoint >= coolingSetpoint) {
+		heatingSetpoint = coolingSetpoint
+	}
+
+	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
+		generateSetpointEvent()
+		generateStatusEvent()
+	} else {
+		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
+	}
 }
 
-void setCoolingSetpoint(degreesF) {
-	setCoolingSetpoint(degreesF.toDouble())
-}
+void resumeProgram() {
 
-void setCoolingSetpoint(Double degreesF) {
-	log.debug "setCoolingSetpoint({$degreesF})"
-	sendEvent("name":"coolingSetpoint", "value":degreesF)
-	Double heatingSetpoint = device.currentValue("heatingSetpoint")
-	parent.setHold(this, heatingSetpoint, degreesF)
-}
+	log.debug "resumeProgram() is called"
+	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.resumeProgram(this, deviceId)) {
+		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
+		runIn(5, "poll")
+		log.debug "resumeProgram() is done"
+		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
+	} else {
+		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
+		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+	}
 
-def configure() {
-	
-}
-
-def resumeProgram() {
-	parent.resumeProgram(this)
 }
 
 def modes() {
 	if (state.modes) {
-        log.debug "Modes = ${state.modes}"
-    	return state.modes
-    }
-    else {
-    	state.modes = parent.availableModes(this)
-        log.debug "Modes = ${state.modes}"        
-        return state.modes
-    }
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
+	else {
+		state.modes = parent.availableModes(this)
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
 }
 
 def fanModes() {
 	["off", "on", "auto", "circulate"]
 }
 
-
 def switchMode() {
 	log.debug "in switchMode"
 	def currentMode = device.currentState("thermostatMode")?.value
@@ -314,7 +292,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-    log.debug "In switchToMode = ${nextMode}"
+	log.debug "In switchToMode = ${nextMode}"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
 		"$nextMode"()
@@ -376,300 +354,326 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
-	
+
 }
 
 def setThermostatFanMode(String value) {
 
 	log.debug "setThermostatFanMode({$value})"
-	
+
 }
 
 def generateModeEvent(mode) {
-
-   sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
 }
 
 def generateFanModeEvent(fanMode) {
-
-   sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true)
 }
 
 def generateOperatingStateEvent(operatingState) {
-
-   sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true, isStateChange: true)
-
+	sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true)
 }
 
 def off() {
 	log.debug "off"
-	generateModeEvent("off")     
-    if (parent.setMode (this,"off"))
-        generateModeEvent("off")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()
-    generateStatusEvent()   
-	
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"off", deviceId))
+		generateModeEvent("off")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def heat() {
 	log.debug "heat"
-	generateModeEvent("heat")    
-    if (parent.setMode (this,"heat"))
-        generateModeEvent("heat")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"heat", deviceId))
+		generateModeEvent("heat")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
-    generateModeEvent("auxHeatOnly")    
-    if (parent.setMode (this,"auxHeatOnly"))
-        generateModeEvent("auxHeatOnly")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auxHeatOnly", deviceId))
+		generateModeEvent("auxHeatOnly")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def cool() {
 	log.debug "cool"
-    generateModeEvent("cool")
-    if (parent.setMode (this,"cool"))
-        generateModeEvent("cool")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()   
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"cool", deviceId))
+		generateModeEvent("cool")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def auto() {
 	log.debug "auto"
-    generateModeEvent("auto")
-    if (parent.setMode (this,"auto"))
-        generateModeEvent("auto")
-    else {
-       	log.debug "Error setting new mode." 
-    	def currentMode = device.currentState("thermostatMode")?.value
-        generateModeEvent(currentMode) // reset the tile back
-    }
-    generateSetpointEvent()    
-    generateStatusEvent()  
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+	if (parent.setMode (this,"auto", deviceId))
+		generateModeEvent("auto")
+	else {
+		log.debug "Error setting new mode."
+		def currentMode = device.currentState("thermostatMode")?.value
+		generateModeEvent(currentMode) // reset the tile back
+	}
+	generateSetpointEvent()
+	generateStatusEvent()
 }
 
 def fanOn() {
 	log.debug "fanOn"
-    parent.setFanMode (this,"on")
-	
+//    parent.setFanMode (this,"on")
+
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-   	parent.setFanMode (this,"auto")    
-	
+//    parent.setFanMode (this,"auto")
+
 }
 
 def fanCirculate() {
 	log.debug "fanCirculate"
-    parent.setFanMode (this,"circulate")
-	
+//    parent.setFanMode (this,"circulate")
+
 }
 
 def fanOff() {
 	log.debug "fanOff"
-    parent.setFanMode (this,"off")
-	
+//    parent.setFanMode (this,"off")
+
 }
 
 def generateSetpointEvent() {
 
-   	log.debug "Generate SetPoint Event"
+	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-    log.debug "Current Mode = ${mode}" 
+	log.debug "Current Mode = ${mode}"
 
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    log.debug "Heating Setpoint = ${heatingSetpoint}"
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
 
 	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    log.debug "Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")                       
-        
-    }
-    else if (mode == "cool") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")     
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
-    } else if (mode == "auto") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":"Auto")
+	if (mode == "heat") {
 
-    } else if (mode == "off") {
-            
-        sendEvent("name":"thermostatSetpoint", "value":"Off")    
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
 
-    } else if (mode == "emergencyHeat") {
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")           
+	}
+	else if (mode == "cool") {
 
-    }
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
+
+	} else if (mode == "auto") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
+	} else if (mode == "off") {
+
+		sendEvent("name":"thermostatSetpoint", "value":"Off")
+
+	} else if (mode == "emergencyHeat") {
+
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+
+	}
 
 }
 
 void raiseSetpoint() {
-
-   	log.debug "Raise SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}"
-    
-    if (mode == "heat") {
-        
-        heatingSetpoint++
-        
-        if (heatingSetpoint > 99)
-           heatingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)               
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint++
-        
-        if (coolingSetpoint > 99)
-            coolingSetpoint = 99
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)       
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"        
-        
-    }
-    generateStatusEvent()
+	def targetvalue
 
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow raiseSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue + 1
+
+		if (mode == "heat" && targetvalue > 79) {
+			targetvalue = 79
+		} else if (mode == "cool" && targetvalue > 92) {
+			targetvalue = 92
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode raiseSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
 }
 
-
+//called by tile when user hit raise temperature button on UI
 void lowerSetpoint() {
-   	log.debug "Lower SetPoint"
-    
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-    
-    log.debug "Current Mode = ${mode}, Current Heating Setpoint = ${heatingSetpoint}, Current Cooling Setpoint = ${coolingSetpoint}"
-    
-    if (mode == "heat" || mode == "emergencyHeat") {
-        
-        heatingSetpoint--  
-        
-        if (heatingSetpoint < 32)
-           heatingSetpoint = 32
+	def targetvalue
 
-        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
-        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Heating Setpoint = ${heatingSetpoint}"
-        
-    }
-    else if (mode == "cool") {
-                
-        coolingSetpoint--
-        
-        if (coolingSetpoint < 32)
-           coolingSetpoint = 32
-        
-        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
-        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint) 
-        
-        parent.setHold (this, heatingSetpoint, coolingSetpoint)
-        
-        log.debug "New Cooling Setpoint = ${coolingSetpoint}"
-        
-    }
-    generateStatusEvent()
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow lowerSetpoint"
+	} else {
+		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+		} else {
+			targetvalue = 0
+		}
+		targetvalue = targetvalue - 1
+
+		if (mode == "heat" && targetvalue.toInteger() < 45) {
+			targetvalue = 45
+		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
+			targetvalue = 65
+		}
+
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		log.info "In mode $mode lowerSetpoint() to $targetvalue"
+
+		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
+	}
+}
+
+//called by raiseSetpoint() and lowerSetpoint()
+void alterSetpoint(temp) {
+
+	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def deviceId = device.deviceNetworkId.split(/\./).last()
+
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
+
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
+		}
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
+		}
+	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
+			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+	//step2: call parent.setHold to send http request to 3rd party cloud
+	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()   
-    def temperature = device.currentValue("temperature").toInteger()  
-    
-    def statusText
-    
-    log.debug "Generate Status Event for Mode = ${mode}"
-    log.debug "Temperature = ${temperature}"
-    log.debug "Heating set point = ${heatingSetpoint}"
-    log.debug "Cooling set point = ${coolingSetpoint}"
-    log.debug "HVAC Mode = ${mode}"
-    
-    if (mode == "heat") {
-    
-    	if (temperature >= heatingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Heating to ${heatingSetpoint}° F"
-        
-    } else if (mode == "cool") {
-    
-        if (temperature <= coolingSetpoint)
-        	statusText = "Right Now: Idle"
-        else
-    		statusText = "Cooling to ${coolingSetpoint}° F"
-        
-    } else if (mode == "auto") {
-        
-    	statusText = "Right Now: Auto"
-        
-    } else if (mode == "off") {
-    
-    	statusText = "Right Now: Off"
-        
-    } else if (mode == "emergencyHeat") {
-    
-    	statusText = "Emergency Heat"
-        
-    } else {
-    
-        statusText = "?"
-        
-    }
-    log.debug "Generate Status Event = ${statusText}"
-    sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true, isStateChange: true)
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def temperature = device.currentValue("temperature").toInteger()
+
+	def statusText
+
+	log.debug "Generate Status Event for Mode = ${mode}"
+	log.debug "Temperature = ${temperature}"
+	log.debug "Heating set point = ${heatingSetpoint}"
+	log.debug "Cooling set point = ${coolingSetpoint}"
+	log.debug "HVAC Mode = ${mode}"
+
+	if (mode == "heat") {
+
+		if (temperature >= heatingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Heating to ${heatingSetpoint}° F"
+
+	} else if (mode == "cool") {
+
+		if (temperature <= coolingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Cooling to ${coolingSetpoint}° F"
+
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "emergencyHeat") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
+	log.debug "Generate Status Event = ${statusText}"
+	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
 
+//generate custom mobile activity feeds event
+def generateActivityFeedsEvent(notificationMessage) {
+	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
+}

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 		capability "Switch Level"
         capability "Polling"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -26,8 +26,6 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45852"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45857"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -26,8 +26,6 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "0003, 000A,0019", manufacturer: "Jasco Products", model: "45853"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45856"
 	}
 
 	// simulator metadata

devicetypes/smartthings/harmony-activity.src/harmony-activity.groovy

@@ -0,0 +1,81 @@
+/**
+ *  Logitech Harmony Activity
+ *
+ *  Copyright 2015 Juan Risso
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+        definition (name: "Harmony Activity", namespace: "smartthings", author: "Juan Risso") {
+        capability "Switch"
+        capability "Actuator"
+		capability "Refresh"
+
+        command "huboff"
+        command "alloff"
+        command "refresh"
+	}
+
+	// simulator metadata
+	simulator {
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: 'Off', action: "switch.on", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#ffffff", nextState: "on"
+			state "on", label: 'On', action: "switch.off", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#79b821", nextState: "off"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("forceoff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'Force End', action:"switch.off", icon:"st.secondary.off"
+		}
+		standardTile("huboff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'End Hub Action', action:"huboff", icon:"st.harmony.harmony-hub-icon"
+		}
+		standardTile("alloff", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'All Actions', action:"alloff", icon:"st.secondary.off"
+		}
+		main "button"
+		details(["button", "refresh", "forceoff", "huboff", "alloff"])
+	}
+}
+
+def parse(String description) {
+}
+
+def on() {
+	sendEvent(name: "switch", value: "on")
+    log.trace parent.activity(device.deviceNetworkId,"start")
+}
+
+def off() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity(device.deviceNetworkId,"end")
+}
+
+def huboff() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity(device.deviceNetworkId,"hub")
+}
+
+def alloff() {
+	sendEvent(name: "switch", value: "off")
+    log.trace parent.activity("all","end")
+}
+
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	log.trace parent.poll()
+}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -17,44 +17,50 @@ metadata {
 	}
 
 	simulator {
-		// TODO: define status and reply messages here
+
 	}
 
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+
+			tileAttribute ("device.model", key: "SECONDARY_CONTROL") {
+				attributeState "model", label: '${currentValue}'
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
-			state "color", action:"setColor"
-		}
-
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
-			state "level", label: '${currentValue}%'
-		}
-
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..9000)") {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
 			state "colorTemp", action:"color temperature.setColorTemperature"
 		}
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main(["switch"])
-		details(["switch", "refresh", "level", "levelSliderControl", "rgbSelector", "colorTempSliderControl", "colorTemp"])
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
 }
 
@@ -70,7 +76,7 @@ def parse(String description) {
 def setHue(percentage) {
 	log.debug "setHue ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "hue:${percentage * 3.6}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "hue:${percentage * 3.6}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "hue", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -83,7 +89,7 @@ def setHue(percentage) {
 def setSaturation(percentage) {
 	log.debug "setSaturation ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "saturation:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "saturation:${percentage / 100}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "saturation", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -114,7 +120,7 @@ def setColor(Map color) {
 		}
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: attrs.join(" ")])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "color", value: color.hex)
 			sendEvent(name: "switch", value: "on")
@@ -135,9 +141,10 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", ["brightness": percentage / 100, "power": "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -148,7 +155,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -163,7 +170,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -172,7 +179,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -180,19 +187,26 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
-	if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data
+	def data = resp.data[0]
+	log.debug("Data: ${data}")
 
-	sendEvent(name: "level", value: sprintf("%.1f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
-	sendEvent(name: "hue",        value: data.color.hue / 3.6)
+	sendEvent(name: "hue", value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
 	return []
 }
@@ -201,3 +215,11 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -16,41 +16,44 @@ metadata {
 	}
 
 	simulator {
-		// TODO: define status and reply messages here
+
 	}
 
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
+
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
-			state "level", label: '${currentValue}%'
-		}
-
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
 			state "colorTemp", action:"color temperature.setColorTemperature"
 		}
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
+
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main(["switch"])
-		details(["switch", "refresh", "level", "levelSliderControl", "colorTempSliderControl", "colorTemp"])
+		main "switch"
+		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
 	}
+
 }
 
 // parse events into attributes
@@ -72,9 +75,10 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [brightness: percentage / 100, power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
+			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -85,7 +89,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
+		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -100,7 +104,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -109,7 +113,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
+		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -117,16 +121,22 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
-	if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${selector()}")
+	if (resp.status == 404) {
+		sendEvent(name: "switch", value: "unreachable")
+		return []
+	} else if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data
+	def data = resp.data[0]
 
-	sendEvent(name: "level", value: sprintf("%f", (data.brightness ?: 1) * 100))
+	sendEvent(name: "label", value: data.label)
+	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
+	sendEvent(name: "model", value: data.product.name)
 
 	return []
 }
@@ -135,3 +145,11 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
+
+def selector() {
+	if (device.deviceNetworkId.contains(":")) {
+		return device.deviceNetworkId
+	} else {
+		return "id:${device.deviceNetworkId}"
+	}
+}

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -5,6 +5,8 @@
     that issue by using state variables
 */
 
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
     definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
 
@@ -20,10 +22,7 @@ metadata {
 
         // indicates that device keeps track of heartbeat (in state.heartbeat)
         attribute "heartbeat", "string"
-
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White"
+        
 
     }
 

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -79,8 +79,8 @@ metadata {
 	}
     
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 }
 

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -88,8 +88,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -27,7 +27,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
  
 	simulator {
@@ -43,8 +43,8 @@ metadata {
 				])
 		}
 		section {
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
  

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -45,8 +46,8 @@ metadata {
 				])
 		}
 		section {
-			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
 
@@ -352,4 +353,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -30,6 +30,7 @@
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
  	}
@@ -61,8 +62,8 @@
 				])
 		}
 		section {
- 			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
  		}
 		section {
  			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
@@ -115,31 +116,30 @@
 	}
  }
 
- def parse(String description) {
- 	
- 	Map map = [:]
- 	if (description?.startsWith('catchall:')) {
- 		map = parseCatchAllMessage(description)
- 	}
- 	else if (description?.startsWith('read attr -')) {
- 		map = parseReportAttributeMessage(description)
- 	}
+def parse(String description) {
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
     else if (description?.startsWith('temperature: ')) {
- 		map = parseCustomMessage(description)
- 	}
- 	else if (description?.startsWith('zone status')) {
- 		map = parseIasMessage(description)
- 	}
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
 
  	def result = map ? createEvent(map) : null
 
- 	if (description?.startsWith('enroll request')) {
- 		List cmds = enrollResponse()
- 		log.debug "enroll response: ${cmds}"
- 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
- 	}
- 	return result
- }
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+    else if (description?.startsWith('read attr -')) {
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
+    }
+	return result
+}
 
  private Map parseCatchAllMessage(String description) {
  	Map resultMap = [:]
@@ -178,28 +178,40 @@ private boolean shouldProcessMessage(cluster) {
     return !ignoredMessage
 }
 
-private Map parseReportAttributeMessage(String description) {
+private List parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-    
-    Map resultMap = [:]
+
+	List result = []
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
+		result << getTemperatureResult(value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-  		resultMap = getAccelerationResult(descMap.value)
+		if (descMap.value.size() == 32) {
+			// value will look like 00ae29001403e2290013001629001201
+			// breaking this apart and swapping byte order where appropriate, this breaks down to:
+			//   X (0x0012) = 0x0016
+			//   Y (0x0013) = 0x03E2
+			//   Z (0x0014) = 0x00AE
+			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
+			// this will be fixed in a future update
+			def threeAxisAttributes = descMap.value[0..-9]
+			result << parseAxis(threeAxisAttributes)
+			descMap.value = descMap.value[-2..-1]
+		}
+        result << getAccelerationResult(descMap.value)
 	}
-    else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-  		resultMap = parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return resultMap
+	return result
 }
 
 private Map parseCustomMessage(String description) {
@@ -363,29 +375,17 @@ def getTemperature(value) {
         
         /* sensitivity - default value (8) */
         
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 400",
 
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-        "zcl mfg-code 0x104E", "delay 200",
+        "zcl mfg-code ${manufacturerCode}", "delay 200",
         "zcl global read 0xFC02 0x0010",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0012",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0013",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400",
-        
-        "zcl mfg-code 0x104E", "delay 200",
-        "zcl global read 0xFC02 0x0014",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
-		]
+        "send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -409,19 +409,19 @@ def getTemperature(value) {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code 0x104E", 
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code 0x104E",
+		"zcl mfg-code ${manufacturerCode}",
 		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 
@@ -519,6 +519,14 @@ private Map getXyzResult(results, description) {
 	]
 }
 
+private getManufacturerCode() {
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		return "0x110A"
+	} else {
+		return "0x104E"
+	}
+}
+
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -43,8 +43,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -32,8 +32,8 @@
  	}
 
  	preferences {
- 		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
  	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -34,8 +34,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -45,8 +45,8 @@ metadata {
 	}
     
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 
 	tiles {

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
 		capability "Switch Level"

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,5 +1,5 @@
 metadata {
-	definition (name: "Color Control Capability", namespace: "capabilities", author: "SmartThings") {
+	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,14 +33,14 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		tile(name: "powerChart", attribute: "powerContent", type: "HTML", url: '${currentValue}', width: 3, height: 2) { }
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "power"
-		details(["powerChart", "power", "refresh"])
+		details(["powerContent", "power", "refresh"])
 
 	}
 }
@@ -74,10 +74,10 @@ public addWattvisionData(json) {
 
 	log.trace "Adding data from Wattvision"
 
-	def data = json.data
+	def data = parseJson(json.data.toString())
 	def units = json.units ?: "watts"
 
-	if (data) {
+	if (data.size() > 0) {
 		def latestData = data[-1]
 		data.each {
 			sendPowerEvent(it.t, it.v, units, (latestData == it))
@@ -103,3 +103,7 @@ private sendPowerEvent(time, value, units, isLatest = false) {
 	sendEvent(eventData)
 
 }
+
+def parseJson(String s) {
+	new groovy.json.JsonSlurper().parseText(s)
+}

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -15,6 +15,8 @@
  *  Thanks to Chad Monroe @cmonroe and Patrick Stuart @pstuart
  *
  */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
 	
@@ -25,7 +27,6 @@ metadata {
         capability "Switch"
 		capability "Switch Level"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,FF00", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -25,6 +25,8 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
+    attribute "currentIP", "string"
+
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -34,21 +36,36 @@ metadata {
 	// simulator metadata
 	simulator {}
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
-			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
-		}
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
 
-		main "switch"
-		details (["switch", "refresh"])
-	}
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes
@@ -68,6 +85,7 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
+		unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
@@ -78,13 +96,14 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "Notify: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
+			          result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}")
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "GetBinaryResponse: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
+			def dispaux = device.currentValue("switch") != value
+			result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
 		}
 	}
 
@@ -101,14 +120,6 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
-private Integer convertHexToInt(hex) {
-    Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-    [convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -195,6 +206,8 @@ def subscribe(ip, port) {
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
 		updateDataValue("ip", ip)
+    	def ipvalue = convertHexToIP(getDataValue("ip"))
+        sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -259,6 +272,8 @@ User-Agent: CyberGarage-HTTP/1.0
 
 def poll() {
 log.debug "Executing 'poll'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -274,3 +289,15 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
+
+def setOffline() {
+    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
+}
+
+private Integer convertHexToInt(hex) {
+ 	Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -21,6 +21,8 @@
 		capability "Refresh"
 		capability "Sensor"
 
+    	attribute "currentIP", "string"
+
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -31,17 +33,30 @@
 	}
 
 	// UI tile definitions
-	tiles {
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "motion", canChangeIcon: true){
+            tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
+                 attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+                 attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+                 attributeState "offline", label:'${name}', icon:"st.motion.motion.active", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
+
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-		}
-		standardTile("refresh", "device.motion", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+      		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
 		main "motion"
-		details (["motion", "refresh"])
+		details (["rich-control", "refresh"])
 	}
 }
 
@@ -62,6 +77,7 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
+    unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
@@ -72,7 +88,7 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "active" : "inactive"
 			log.debug "Notify - BinaryState = ${value}"
-			result << createEvent(name: "motion", value: value)
+      result << createEvent(name: "motion", value: value, descriptionText: "Motion is ${value}")
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		}
@@ -91,14 +107,6 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}
-
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -125,6 +133,8 @@ def refresh() {
 ////////////////////////////
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -165,7 +175,9 @@ def subscribe(ip, port) {
 	def existingPort = getDataValue("port")
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
-		updateDataValue("ip", ip)
+        updateDataValue("ip", ip)
+    	def ipvalue = convertHexToIP(getDataValue("ip"))
+    	sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -226,3 +238,15 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Envelope>
 """, physicalgraph.device.Protocol.LAN)
 }
+
+def setOffline() {
+    sendEvent(name: "motion", value: "offline", descriptionText: "The device is offline")
+}
+
+private Integer convertHexToInt(hex) {
+ 	Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -10,120 +10,142 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *	Wemo Switch
+ * Wemo Switch
  *
- *	Author: superuser
- *	Date: 2013-10-11
+ * Author: Juan Risso (SmartThings)
+ * Date: 2015-10-11
  */
  metadata {
-	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
-		capability "Actuator"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
+ 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Switch"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
 
-		command "subscribe"
-		command "resubscribe"
-		command "unsubscribe"
-	}
+        attribute "currentIP", "string"
 
-	// simulator metadata
-	simulator {}
+        command "subscribe"
+        command "resubscribe"
+        command "unsubscribe"
+ }
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ // simulator metadata
+ simulator {}
 
-		main "switch"
-		details (["switch", "refresh"])
-	}
+ // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+ 			}
+            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
+             	 attributeState "currentIP", label: ''
+ 			}
+        }
+
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"
+    log.debug "Parsing '${description}'"
 
-	def msg = parseLanMessage(description)
-	def headerString = msg.header
+    def msg = parseLanMessage(description)
+    def headerString = msg.header
 
-	if (headerString?.contains("SID: uuid:")) {
-		def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
-		sid -= "SID: uuid:".trim()
+    if (headerString?.contains("SID: uuid:")) {
+        def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
+        sid -= "SID: uuid:".trim()
 
-		updateDataValue("subscriptionId", sid)
-	}
+        updateDataValue("subscriptionId", sid)
+ 	}
 
-	def result = []
-	def bodyString = msg.body
-	if (bodyString) {
-		def body = new XmlSlurper().parseText(bodyString)
-
-		if (body?.property?.TimeSyncRequest?.text()) {
-			log.trace "Got TimeSyncRequest"
-			result << timeSyncResponse()
-		} else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
-			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
-		} else if (body?.property?.BinaryState?.text()) {
-			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
-			log.trace "Notify: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
-		} else if (body?.property?.TimeZoneNotification?.text()) {
-			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
-		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
-			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
-			log.trace "GetBinaryResponse: BinaryState = ${value}"
-			result << createEvent(name: "switch", value: value)
-		}
-	}
-
-	result
+    def result = []
+    def bodyString = msg.body
+    if (bodyString) {
+    	unschedule("setOffline")
+        def body = new XmlSlurper().parseText(bodyString)
+ 		if (body?.property?.TimeSyncRequest?.text()) {
+        	log.trace "Got TimeSyncRequest"
+        	result << timeSyncResponse()
+        } else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
+ 			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
+ 		} else if (body?.property?.BinaryState?.text()) {
+        	def value = body?.property?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
+        	log.trace "Notify: BinaryState = ${value}, ${body.property.BinaryState}"
+            def dispaux = device.currentValue("switch") != value
+            result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
+        } else if (body?.property?.TimeZoneNotification?.text()) {
+ 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
+ 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
+ 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
+ 			log.trace "GetBinaryResponse: BinaryState = ${value}, ${body.property.BinaryState}"
+            log.info "Connection: ${device.currentValue("connection")}"
+            if (device.currentValue("currentIP") == "Offline") {
+                def ipvalue = convertHexToIP(getDataValue("ip"))
+                sendEvent(name: "IP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+            }
+            def dispaux2 = device.currentValue("switch") != value
+     		result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux2)
+ 		}
+ 	}
+ result
 }
 
 private getTime() {
-	// This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
-	((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
+    // This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
+    ((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
 }
 
 private getCallBackAddress() {
-	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
+ 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
 private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
+ 	Integer.parseInt(hex,16)
 }
 
 private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+ 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
 private getHostAddress() {
-	def ip = getDataValue("ip")
-	def port = getDataValue("port")
-
-	if (!ip || !port) {
-		def parts = device.deviceNetworkId.split(":")
-		if (parts.length == 2) {
-			ip = parts[0]
-			port = parts[1]
-		} else {
-			log.warn "Can't figure out ip and port for device: ${device.id}"
-		}
-	}
-	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
-	return convertHexToIP(ip) + ":" + convertHexToInt(port)
+ 	def ip = getDataValue("ip")
+ 	def port = getDataValue("port")
+ 	if (!ip || !port) {
+ 		def parts = device.deviceNetworkId.split(":")
+ 		if (parts.length == 2) {
+ 			ip = parts[0]
+ 			port = parts[1]
+ 		} else {
+ 			log.warn "Can't figure out ip and port for device: ${device.id}"
+		 }
+ 	}
+ 	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
+ 	return convertHexToIP(ip) + ":" + convertHexToInt(port)
 }
 
-
 def on() {
-	log.debug "Executing 'on'"
-    sendEvent(name: "switch", value: "on")
+log.debug "Executing 'on'"
 def turnOn = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
@@ -133,17 +155,16 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
-	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+ <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>1</BinaryState>
-	</m:SetBinaryState>
+ </m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
 def off() {
-	log.debug "Executing 'off'"
-	sendEvent(name: "switch", value: "off")
-	def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
+log.debug "Executing 'off'"
+def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
 Content-Type: text/xml
@@ -152,36 +173,13 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
-	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+ <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>0</BinaryState>
-	</m:SetBinaryState>
+ </m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
-/*def refresh() {
-	log.debug "Executing 'refresh'"
-new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
-SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
-Content-Length: 277
-Content-Type: text/xml; charset="utf-8"
-HOST: ${getHostAddress()}
-User-Agent: CyberGarage-HTTP/1.0
-
-<?xml version="1.0" encoding="utf-8"?>
-<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
-<s:Body>
-<u:GetBinaryState xmlns:u="urn:Belkin:service:basicevent:1">
-</u:GetBinaryState>
-</s:Body>
-</s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}*/
-
-def refresh() {
-	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
-	[subscribe(), timeSyncResponse(), poll()]
-}
-
 def subscribe(hostAddress) {
 log.debug "Executing 'subscribe()'"
 def address = getCallBackAddress()
@@ -200,27 +198,30 @@ def subscribe() {
 	subscribe(getHostAddress())
 }
 
-def subscribe(ip, port) {
-	def existingIp = getDataValue("ip")
-	def existingPort = getDataValue("port")
-	if (ip && ip != existingIp) {
-		log.debug "Updating ip from $existingIp to $ip"
-		updateDataValue("ip", ip)
-	}
-	if (port && port != existingPort) {
-		log.debug "Updating port from $existingPort to $port"
-		updateDataValue("port", port)
-	}
+def refresh() {
+ 	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
+ 	[subscribe(), timeSyncResponse(), poll()]
+}
 
+def subscribe(ip, port) {
+    def existingIp = getDataValue("ip")
+    def existingPort = getDataValue("port")
+    if (ip && ip != existingIp) {
+         log.debug "Updating ip from $existingIp to $ip"
+    	 updateDataValue("ip", ip)
+    	 def ipvalue = convertHexToIP(getDataValue("ip"))
+         sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
+    }
+ 	if (port && port != existingPort) {
+ 		log.debug "Updating port from $existingPort to $port"
+ 		updateDataValue("port", port)
+	}
 	subscribe("${ip}:${port}")
 }
 
-////////////////////////////
 def resubscribe() {
-log.debug "Executing 'resubscribe()'"
-
-def sid = getDeviceDataByName("subscriptionId")
-
+    log.debug "Executing 'resubscribe()'"
+    def sid = getDeviceDataByName("subscriptionId")
 new physicalgraph.device.HubAction("""SUBSCRIBE /upnp/event/basicevent1 HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -228,12 +229,11 @@ TIMEOUT: Second-5400
 
 
 """, physicalgraph.device.Protocol.LAN)
-
 }
 
-////////////////////////////
+
 def unsubscribe() {
-def sid = getDeviceDataByName("subscriptionId")
+    def sid = getDeviceDataByName("subscriptionId")
 new physicalgraph.device.HubAction("""UNSUBSCRIBE publisher path HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -242,7 +242,7 @@ SID: uuid:${sid}
 """, physicalgraph.device.Protocol.LAN)
 }
 
-////////////////////////////
+
 //TODO: Use UTC Timezone
 def timeSyncResponse() {
 log.debug "Executing 'timeSyncResponse()'"
@@ -267,9 +267,15 @@ User-Agent: CyberGarage-HTTP/1.0
 """, physicalgraph.device.Protocol.LAN)
 }
 
+def setOffline() {
+	//sendEvent(name: "currentIP", value: "Offline", displayed: false)
+    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
+}
 
 def poll() {
 log.debug "Executing 'poll'"
+if (device.currentValue("currentIP") != "Offline")
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -24,6 +24,9 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-CIA19NAE26", deviceJoinName: "Sengled Element touch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45852", deviceJoinName: "GE Zigbee Plug-In Dimmer"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45857", deviceJoinName: "GE Zigbee In-Wall Dimmer"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -17,12 +17,14 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -32,7 +32,13 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
                         manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale YRL220 Lock"
+                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
+                        manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
     }
 
     tiles(scale: 2) {
@@ -85,11 +91,24 @@ def uninstalled() {
 }
 
 def configure() {
+    /*
     def cmds =
         zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
                            "${TYPE_ENUM8}", 0, 3600, "{01}") +
         zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
-                           "${TYPE_U8}", 3600, 3600, "{01}")
+                           "${TYPE_U8}", 600, 21600, "{01}")
+    */
+    def zigbeeId = device.zigbeeId
+    def cmds =
+        [
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+        ]
     log.info "configure() --- cmds: $cmds"
     return cmds + refresh() // send refresh cmds as part of config
 }
@@ -117,15 +136,17 @@ def parse(String description) {
 
 // Lock capability commands
 def lock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
-    log.info "lock() -- cmds: $cmds"
-    return cmds
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    //log.info "lock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
 }
 
 def unlock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
-    log.info "unlock() -- cmds: $cmds"
-    return cmds
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    //log.info "unlock() -- cmds: $cmds"
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
 }
 
 // Private methods
@@ -139,8 +160,10 @@ private Map parseReportAttributeMessage(String description) {
     Map resultMap = [:]
     if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
         resultMap.name = "battery"
-        // BatteryPercentageRemaining is specified in .5% increments
-        resultMap.value = Integer.parseInt(descMap.value, 16) / 2
+        resultMap.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
+        if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
+            resultMap.value = Integer.parseInt(descMap.value, 16)
+        }
         log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
     }
     else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -23,6 +23,8 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -17,7 +17,6 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -23,14 +23,18 @@ metadata {
         capability "Color Temperature"
         capability "Configuration"
         capability "Refresh"
-        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
     }
 
     // UI tile definitions

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -66,9 +66,20 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def updated() {
+	try {
+		if (!state.init) {
+			state.init = true
+			response(secureSequence([zwave.doorLockV1.doorLockOperationGet(), zwave.batteryV1.batteryGet()]))
+		}
+	} catch (e) {
+		log.warn "updated() threw $e"
+	}
+}
+
 def parse(String description) {
 	def result = null
-	if (description.startsWith("Err")) {
+	if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -80,6 +91,8 @@ def parse(String description) {
 				displayed: true,
 			)
 		}
+	} else if (description == "updated") {
+		return null
 	} else {
 		def cmd = zwave.parse(description, [ 0x98: 1, 0x72: 2, 0x85: 2, 0x86: 1 ])
 		if (cmd) {
@@ -286,7 +299,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 			}
 			break
 		case 167:
-			if (!state.lastbatt || (new Date().time) - state.lastbatt > 12*60*60*1000) {
+			if (!state.lastbatt || now() - state.lastbatt > 12*60*60*1000) {
 				map = [ descriptionText: "$device.displayName: battery low", isStateChange: true ]
 				result << response(secure(zwave.batteryV1.batteryGet()))
 			} else {
@@ -431,7 +444,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	} else {
 		map.value = cmd.batteryLevel
 	}
-	state.lastbatt = new Date().time
+	state.lastbatt = now()
 	createEvent(map)
 }
 
@@ -499,15 +512,14 @@ def refresh() {
 		cmds << "delay 4200"
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()  // old Schlage locks use group 2 and don't secure the Association CC
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
-	} else if (new Date().time - state.associationQuery.toLong() > 9000) {
-		log.debug "setting association"
+		state.associationQuery = now()
+	} else if (secondsPast(state.associationQuery, 9)) {
 		cmds << "delay 6000"
 		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
 		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = new Date().time
+		state.associationQuery = now()
 	}
 	log.debug "refresh sending ${cmds.inspect()}"
 	cmds
@@ -515,55 +527,22 @@ def refresh() {
 
 def poll() {
 	def cmds = []
-	if (state.assoc != zwaveHubNodeId && secondsPast(state.associationQuery, 19 * 60)) {
-		log.debug "setting association"
-		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
-		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
-		cmds << "delay 6000"
-		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		cmds << "delay 6000"
-		state.associationQuery = new Date().time
-	} else {
-		// Only check lock state if it changed recently or we haven't had an update in an hour
-		def latest = device.currentState("lock")?.date?.time
-		if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
-			cmds << secure(zwave.doorLockV1.doorLockOperationGet())
-			state.lastPoll = (new Date()).time
-		} else if (!state.MSR) {
-			cmds << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-		} else if (!state.fw) {
-			cmds << zwave.versionV1.versionGet().format()
-		} else if (!state.codes) {
-			state.pollCode = 1
-			cmds << secure(zwave.userCodeV1.usersNumberGet())
-		} else if (state.pollCode && state.pollCode <= state.codes) {
-			cmds << requestCode(state.pollCode)
-		} else if (!state.lastbatt || (new Date().time) - state.lastbatt > 53*60*60*1000) {
-			cmds << secure(zwave.batteryV1.batteryGet())
-		} else if (!state.enc) {
-			encryptCodes()
-			state.enc = 1
-		}
+	// Only check lock state if it changed recently or we haven't had an update in an hour
+	def latest = device.currentState("lock")?.date?.time
+	if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
+		cmds << secure(zwave.doorLockV1.doorLockOperationGet())
+		state.lastPoll = now()
+	} else if (!state.lastbatt || now() - state.lastbatt > 53*60*60*1000) {
+		cmds << secure(zwave.batteryV1.batteryGet())
+		state.lastbatt = now()  //inside-214
 	}
-	log.debug "poll is sending ${cmds.inspect()}"
-	device.activity()
-	cmds ?: null
-}
-
-private def encryptCodes() {
-	def keys = new ArrayList(state.keySet().findAll { it.startsWith("code") })
-	keys.each { key ->
-		def match = (key =~ /^code(\d+)$/)
-		if (match) try {
-			def keynum = match[0][1].toInteger()
-			if (keynum > 30 && !state[key]) {
-				state.remove(key)
-			} else if (state[key] && !state[key].startsWith("~")) {
-				log.debug "encrypting $key: ${state[key].inspect()}"
-				state[key] = encrypt(state[key])
-			}
-		} catch (java.lang.NumberFormatException e) { }
+	if (cmds) {
+		log.debug "poll is sending ${cmds.inspect()}"
+		cmds
+	} else {
+		// workaround to keep polling from stopping due to lack of activity
+		sendEvent(descriptionText: "skipping poll", isStateChange: true, displayed: false)
+		null
 	}
 }
 
@@ -672,7 +651,7 @@ private Boolean secondsPast(timestamp, seconds) {
 			return true
 		}
 	}
-	return (new Date().time - timestamp) > (seconds * 1000)
+	return (now() - timestamp) > (seconds * 1000)
 }
 
 private allCodesDeleted() {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -115,6 +115,10 @@ def strobe() {
 	]
 }
 
+def both() {
+	on()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

smartapps/com-obycode/obything-music-connect.src/obything-music-connect.groovy

@@ -20,7 +20,8 @@ definition(
     description: "Use this free SmartApp in conjunction with the ObyThing Music app for your Mac to control and automate music and more with iTunes and SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "http://obycode.com/obything/ObyThingSTLogo.png",
-    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png")
+    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png",
+    singleInstance: true)
 
 
 preferences {

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -22,7 +22,8 @@ definition(
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/imbrianj/nobody-home.src/nobody-home.groovy

@@ -1,164 +1,427 @@
 /**
  *  Nobody Home
  *
- *  Author: brian@bevey.org
- *  Date: 12/19/14
+ *  Author: brian@bevey.org, raychi@gmail.com
+ *  Date: 12/02/2015
  *
- *  Monitors a set of presence detectors and triggers a mode change when everyone has left.
- *  When everyone has left, sets mode to a new defined mode.
- *  When at least one person returns home, set the mode back to a new defined mode.
- *  When someone is home - or upon entering the home, their mode may change dependent on sunrise / sunset.
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing,
+ *  software distributed under the License is distributed on an "AS
+ *  IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ *  express or implied. See the License for the specific language
+ *  governing permissions and limitations under the License.
  */
 
-definition(
-  name: "Nobody Home",
-  namespace: "imbrianj",
-  author: "brian@bevey.org",
-  description: "When everyone leaves, change mode.  If at least one person home, switch mode based on sun position.",
-  category: "Mode Magic",
-  iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-  iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+/**
+ *  Monitors a set of presence sensors and trigger appropriate mode
+ *  based on configured modes and sunrise/sunset time.
+ *
+ *  - When everyone is away [Away]
+ *  - When someone is home during the day [Home]
+ *  - When someone is home at the night [Night]
+ */
+
+// ********** App related functions **********
+
+// The definition provides metadata about the App to SmartThings.
+definition (
+    name:        "Nobody Home",
+    namespace:   "imbrianj",
+    author:      "brian@bevey.org",
+    description: "Automatically set Away/Home/Night mode based on a set of presence sensors and sunrise/sunset time.",
+    category:    "Mode Magic",
+    iconUrl:     "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url:   "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
+// The preferences defines information the App needs from the user.
 preferences {
-  section("When all of these people leave home") {
-    input "people", "capability.presenceSensor", multiple: true
-  }
-
-  section("Change to this mode to...") {
-    input "newAwayMode",    "mode", title: "Everyone is away"
-    input "newSunsetMode",  "mode", title: "At least one person home and nightfall"
-    input "newSunriseMode", "mode", title: "At least one person home and sunrise"
-  }
-
-  section("Away threshold (defaults to 10 min)") {
-    input "awayThreshold", "decimal", title: "Number of minutes", required: false
-  }
-
-  section("Notifications") {
-    input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
-  }
-}
-
-def installed() {
-  init()
-}
-
-def updated() {
-  unsubscribe()
-  init()
-}
-
-def init() {
-  subscribe(people,   "presence", presence)
-  subscribe(location, "sunrise",  setSunrise)
-  subscribe(location, "sunset",   setSunset)
-
-  state.sunMode = location.mode
-}
-
-def setSunrise(evt) {
-  changeSunMode(newSunriseMode)
-}
-
-def setSunset(evt) {
-  changeSunMode(newSunsetMode)
-}
-
-def changeSunMode(newMode) {
-  state.sunMode = newMode
-
-  if(everyoneIsAway() && (location.mode == newAwayMode)) {
-    log.debug("Mode is away, not evaluating")
-  }
-
-  else if(location.mode != newMode) {
-    def message = "${app.label} changed your mode to '${newMode}'"
-    send(message)
-    setLocationMode(newMode)
-  }
-
-  else {
-    log.debug("Mode is the same, not evaluating")
-  }
-}
-
-def presence(evt) {
-  if(evt.value == "not present") {
-    log.debug("Checking if everyone is away")
-
-    if(everyoneIsAway()) {
-      log.info("Starting ${newAwayMode} sequence")
-      def delay = (awayThreshold != null && awayThreshold != "") ? awayThreshold * 60 : 10 * 60
-      runIn(delay, "setAway")
-    }
-  }
-
-  else {
-    if(location.mode != state.sunMode) {
-      log.debug("Checking if anyone is home")
-
-      if(anyoneIsHome()) {
-        log.info("Starting ${state.sunMode} sequence")
-
-        changeSunMode(state.sunMode)
-      }
+    section("Presence sensors to monitor") {
+        input "people", "capability.presenceSensor", multiple: true
     }
 
-    else {
-      log.debug("Mode is the same, not evaluating")
-    }
-  }
-}
-
-def setAway() {
-  if(everyoneIsAway()) {
-    if(location.mode != newAwayMode) {
-      def message = "${app.label} changed your mode to '${newAwayMode}' because everyone left home"
-      log.info(message)
-      send(message)
-      setLocationMode(newAwayMode)
+    section("Mode setting") {
+        input "newAwayMode",    "mode", title: "Everyone is away"
+        input "newSunriseMode", "mode", title: "Someone is home during the day"
+        input "newSunsetMode",  "mode", title: "Someone is home at night"
     }
 
-    else {
-      log.debug("Mode is the same, not evaluating")
+    section("Mode change delay (minutes)") {
+        input "awayThreshold", "decimal", title: "Away delay [5m]", required: false
+        input "arrivalThreshold", "decimal", title: "Arrival delay [2m]", required: false
     }
-  }
 
-  else {
-    log.info("Somebody returned home before we set to '${newAwayMode}'")
-  }
+    section("Notifications") {
+        input "sendPushMessage", "bool", title: "Push notification", required:false
+    }
 }
 
-private everyoneIsAway() {
-  def result = true
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = false
-  }
-
-  log.debug("everyoneIsAway: ${result}")
-
-  return result
+// called when the user installs the App
+def installed()
+{
+    log.debug("installed() @${location.name}: ${settings}")
+    initialize(true)
 }
 
-private anyoneIsHome() {
-  def result = false
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = true
-  }
-
-  log.debug("anyoneIsHome: ${result}")
-
-  return result
+// called when the user installs the app, or changes the App
+// preference
+def updated()
+{
+    log.debug("updated() @${location.name}: ${settings}")
+    unsubscribe()
+    initialize(false)
 }
 
-private send(msg) {
-  if(sendPushMessage != "No") {
-    log.debug("Sending push message")
-    sendPush(msg)
-  }
+def initialize(isInstall)
+{
+    // subscribe to all the events we care about
+    log.debug("Subscribing to events ...")
 
-  log.debug(msg)
+    // thing to subscribe, attribute/state we care about, and callback fn
+    subscribe(people,   "presence", presenceHandler)
+    subscribe(location, "sunrise",  sunriseHandler)
+    subscribe(location, "sunset",   sunsetHandler)
+
+    // set the optional parameter values. these are not available
+    // directly until the app has initialized (that is,
+    // installed/updated has returned). so here we access them through
+    // the settings object, as otherwise will get an exception.
+
+    // store information we need in state object so we can get access
+    // to it later in our event handlers.
+
+    // calculate the away threshold in seconds. can't use the simpler
+    // default falsy value, as value of 0 (no delay) is evaluated to
+    // false (not specified), but we want 0 to represent no delay. so
+    // we compare against null explicitly to see if the user has set a
+    // value or not.
+    if (settings.awayThreshold == null) {
+        settings.awayThreshold = 5  // default away 5 minute
+    }
+    state.awayDelay = (int) settings.awayThreshold * 60
+    log.debug("awayThreshold set to " + state.awayDelay + " second(s)")
+
+    if (settings.arrivalThreshold == null) {
+        settings.arrivalThreshold = 2  // default arrival 2 minute
+    }
+    state.arrivalDelay = (int) settings.arrivalThreshold * 60
+    log.debug("arrivalThreshold set to " + state.arrivalDelay + " second(s)")
+
+    // get push notification setting
+    state.isPush = settings.sendPushMessage ? true : false
+    log.debug("sendPushMessage set to " + state.isPush)
+
+    // on install (not update), figure out what mode we should be in
+    // IF someone's home. This value is needed so that when a presence
+    // sensor is triggered, we know what mode to set the system to, as
+    // the sunrise/sunset event handler may not be triggered yet after
+    // a fresh install.
+    if (isInstall) {
+        // TODO: for now, we simply assume daytime. a better approach
+        //       would be to figure out whether current time is day or
+        //       night, and set it appropriately. However there
+        //       doesn't seem to be a way to query this directly
+        //       without a zip code. This will become the correct
+        //       value at the next sunrise/sunset event.
+        log.debug("No sun info yet, assuming daytime")
+        state.modeIfHome = newSunriseMode
+
+        // set keep a separate sun mode state so we can show a more
+        // helpful message when sun events are triggered.
+        state.currentSunMode = "sunUnknown"
+
+        state.eventDevice = ""  // last event device
+
+        // device that triggered timer. This is not necessarily the
+        // eventDevice. For example, if A arrives, kick off timer,
+        // then b arrives before timer elapsed, we want the
+        // notification message to reference A, not B.
+        state.timerDevice = null
+
+        // anything in flight? We use this to avoid scheduling
+        // duplicate timers (so we don't extend the timer).
+        state.pendingOp = "init"
+
+        // now set the correct mode for the location. This way, we
+        // don't need to wait for the next sun/presence event.
+
+        // we schedule this action to run after the app has fully
+        // initialized. This way, the app install is faster and the
+        // user customized app name is used in the notification.
+        runIn(7, "setInitialMode")
+    }
+    // On update, we don't change state.modeIfHome. This is so that we
+    // preserve the current sun rise/set state we obtained in earlier
+    // sunset/sunrise handler. This way the app remains in the correct
+    // sun state when the user reconfigures it.
 }
+
+def setInitialMode()
+{
+    changeSunMode(state.modeIfHome)
+    state.pendingOp = null
+}
+
+// ********** sunrise/sunset handling **********
+
+// event handler when the sunrise time is reached
+def sunriseHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunriseMode
+    state.currentSunMode = "sunRise"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunriseMode)
+}
+
+// event handler when the sunset time is reached
+def sunsetHandler(evt)
+{
+    // we store the mode we should be in, IF someone's home
+    state.modeIfHome = newSunsetMode
+    state.currentSunMode = "sunSet"
+
+    // change mode if someone's home, otherwise set to away
+    changeSunMode(newSunsetMode)
+}
+
+def changeSunMode(newMode)
+{
+    // if everyone is away, we need to check and ensure the system is
+    // in away mode.
+    if (isEveryoneAway()) {
+        // this shouldn not happen normally as the mode should already
+        // be changed during presenceHandler, but in case this is not
+        // done, such as when app is initially installed while away,
+        // and system is not in away mode, then we toggle it to away
+        // at the sun rise/set event.
+        changeMode(newAwayMode, " because no one is present")
+    } else {
+        // someone is home, we update the mode depending on
+        // sunrise/sunset.
+        if (state.currentSunMode == "sunRise") {
+            changeMode(newMode, " because it's sunrise")
+        } else if (state.currentSunMode == "sunSet") {
+            changeMode(newMode, " because it's sunset")
+        } else {
+            changeMode(newMode)
+        }
+    }
+}
+
+// ********** presence handling **********
+
+// event handler when presence sensor changes state
+def presenceHandler(evt)
+{
+    // get the device name that resulted in the change
+    state.eventDevice= evt.device?.displayName
+
+    // is setInitialMode() still pending?
+    if (state.pendingOp == "init") {
+        log.debug("Pending ${state.pendingOp} op still in progress, ignoring presence event")
+        return
+    }
+
+    if (evt.value == "not present") {
+        handleDeparture()
+    } else {
+        handleArrival()
+    }
+}
+
+def handleDeparture()
+{
+    log.info("${state.eventDevice} left ${location.name}")
+
+    // do nothing if someone's still home
+    if (!isEveryoneAway()) {
+        log.info("Someone is still present, no actions needed")
+        return
+    }
+
+    // Now we set away mode. We perform the following actions even if
+    // home is already in away mode because an arrival timer may be
+    // pending, and scheduling delaySetMode() has the nice effect of
+    // canceling any previous pending timer, which is what we want to
+    // do. So we do this even if delay is 0.
+    log.info("Scheduling ${newAwayMode} mode in " + state.awayDelay + "s")
+    state.pendingOp = "away"
+    state.timerDevice = state.eventDevice
+    // we always use runIn(). This has the benefit of automatically
+    // replacing any pending arrival/away timer. if any arrival timer
+    // is active, it will be clobbered with this away timer. If any
+    // away timer is active, it will be extended with this new timeout
+    // (though normally it should not happen)
+    runIn(state.awayDelay, "delaySetMode")
+}
+
+def handleArrival()
+{
+    // someone returned home, set home/night mode after delay
+    log.info("${state.eventDevice} arrived at ${location.name}")
+
+    def numHome = isAnyoneHome()
+    if (!numHome) {
+        // no one home, do nothing for now (should NOT happen)
+        log.warn("${deviceName} arrived, but isAnyoneHome() returned false!")
+        return
+    }
+
+    if (numHome > 1) {
+        // not the first one home, do nothing, as any action that
+        // should happen would've happened when the first sensor
+        // arrived. this is the opposite of isEveryoneAway() where we
+        // don't do anything if someone's still home.
+        log.debug("Someone is already present, no actions needed")
+        return
+    }
+
+    // check if any pending arrival timer is already active. we want
+    // the timer to trigger when the 1st person arrives, but not
+    // extended when the 2nd person arrives later. this should not
+    // happen because of the >1 check above, but just in case.
+    if (state.pendingOp == "arrive") {
+        log.debug("Pending ${state.pendingOp} op already in progress, do nothing")
+        return
+    }
+
+    // now we set home/night mode
+    log.info("Scheduling ${state.modeIfHome} mode in " + state.arrivalDelay + "s")
+    state.pendingOp = "arrive"
+    state.timerDevice = state.eventDevice
+    // if any away timer is active, it will be clobbered with
+    // this arrival timer
+    runIn(state.arrivalDelay, "delaySetMode")
+}
+
+
+// ********** helper functions **********
+
+// change the system to the new mode, unless its already in that mode.
+def changeMode(newMode, reason="")
+{
+    if (location.mode != newMode) {
+        // notification message
+        def message = "${location.name} changed mode from '${location.mode}' to '${newMode}'" + reason
+        setLocationMode(newMode)
+        send(message)  // send message after changing mode
+    } else {
+        log.debug("${location.name} is already in ${newMode} mode, no actions needed")
+    }
+}
+
+// create a useful departure/arrival reason string
+def reasonStr(isAway, delaySec, delayMin)
+{
+    def reason
+
+    // if we are invoked by timer, use the stored timer trigger
+    // device, otherwise use the last event device
+    if (state.timerDevice) {
+        reason = " because ${state.timerDevice} "
+    } else {
+        reason = " because ${state.eventDevice} "
+    }
+
+    if (isAway) {
+        reason += "left"
+    } else {
+        reason += "arrived"
+    }
+
+    if (delaySec) {
+        if (delaySec > 60) {
+            if (delayMin == null) {
+                delayMin = (int) delaySec / 60
+            }
+            reason += " ${delayMin} minutes ago"
+        } else {
+            reason += " ${delaySec}s ago"
+        }
+    }
+
+    return reason
+}
+
+// http://docs.smartthings.com/en/latest/smartapp-developers-guide/scheduling.html#schedule-from-now
+//
+// By default, if a method is scheduled to run in the future, and then
+// another call to runIn with the same method is made, the last one
+// overwrites the previously scheduled method.
+//
+// We use the above property to schedule our arrval/departure delay
+// using the same function so we don't have to worry about
+// arrival/departure timer firing independently and complicating code.
+def delaySetMode()
+{
+    def newMode = null
+    def reason = ""
+
+    // timer has elapsed, check presence status to figure out what we
+    // need to do
+    if (isEveryoneAway()) {
+        reason = reasonStr(true, state.awayDelay, awayThreshold)
+        newMode = newAwayMode
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: everyone is away")
+        }
+    } else {
+        reason = reasonStr(false, state.arrivalDelay, arrivalThreshold)
+        newMode = state.modeIfHome
+        if (state.pendingOp) {
+            log.debug("${state.pendingOp} timer elapsed: someone is home")
+        }
+    }
+
+    // now change the mode
+    changeMode(newMode, reason);
+
+    state.pendingOp = null
+    state.timerDevice = null
+}
+
+private isEveryoneAway()
+{
+    def result = true
+
+    if (people.findAll { it?.currentPresence == "present" }) {
+        result = false
+    }
+    // log.debug("isEveryoneAway: ${result}")
+
+    return result
+}
+
+// return the number of people that are home
+private isAnyoneHome()
+{
+    def result = 0
+    // iterate over our people variable that we defined
+    // in the preferences method
+    for (person in people) {
+        if (person.currentPresence == "present") {
+            result++
+        }
+    }
+    return result
+}
+
+private send(msg)
+{
+    if (state.isPush) {
+        log.debug("Sending push notification")
+        sendPush(msg)
+    } else {
+        log.debug("Sending notification")
+        sendNotificationEvent(msg)
+    }
+    log.info(msg)
+}

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -11,9 +11,9 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *  
+ *
  *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
- *  devices for which the user has authorized. Likewise, Initial State's services call this 
+ *  devices for which the user has authorized. Likewise, Initial State's services call this
  *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
  *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
@@ -90,7 +90,7 @@ def subscribeToEvents() {
 	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
 	}
-	
+
 	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
 	}
@@ -218,7 +218,7 @@ def setAccessKey() {
 		atomicState.grokerSubdomain = "$newGrokerSubdomain"
 		atomicState.isBucketCreated = false
 	}
-    
+
 	if (newAccessKey && newAccessKey != atomicState.accessKey) {
 		atomicState.accessKey = "$newAccessKey"
 		atomicState.isBucketCreated = false
@@ -262,7 +262,7 @@ def uninstalled() {
 }
 
 def tryCreateBucket() {
-	
+
 	// can't ship events if there is no grokerSubdomain
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		log.error "streaming url is currently null"
@@ -330,57 +330,57 @@ def genericHandler(evt) {
 // This is a handler function for flushing the event buffer
 // after a specified amount of time to reduce the load on ST servers
 def flushBuffer() {
+	def eventBuffer = atomicState.eventBuffer
 	log.trace "About to flush the buffer on schedule"
-	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
-		tryShipEvents()
+	if (eventBuffer != null && eventBuffer.size() > 0) {
+		atomicState.eventBuffer = []
+		tryShipEvents(eventBuffer)
 	}
 }
 
 def eventHandler(name, value) {
-	log.debug atomicState.eventBuffer
-
-	def eventBuffer = atomicState.eventBuffer
 	def epoch = now() / 1000
-	
-	// if for some reason this code block is being run
-	// but the SmartApp wasn't propery setup during install
-	// we need to set initialize the eventBuffer.
-	if (!atomicState.eventBuffer) {
-		atomicState.eventBuffer = []
-	}
+	def eventBuffer = atomicState.eventBuffer ?: []
 	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
-	
-	log.debug eventBuffer
-
-	atomicState.eventBuffer = eventBuffer
 
 	if (eventBuffer.size() >= 10) {
-		tryShipEvents()
+		// Clear eventBuffer right away since we've already pulled it off of atomicState to reduce the risk of missing
+		// events.  This assumes the grokerSubdomain, accessKey, and bucketKey are set correctly to avoid the eventBuffer
+		// from growing unbounded.
+		atomicState.eventBuffer = []
+		tryShipEvents(eventBuffer)
+	} else {
+		// Make sure we persist the updated eventBuffer with the new event added back to atomicState
+		atomicState.eventBuffer = eventBuffer
 	}
+	log.debug "Event added to buffer: " + eventBuffer
 }
 
 // a helper function for shipping the atomicState.eventBuffer to Initial State
-def tryShipEvents() {
+def tryShipEvents(eventBuffer) {
 
+	def grokerSubdomain = atomicState.grokerSubdomain
 	// can't ship events if there is no grokerSubdomain
-	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
+	if (grokerSubdomain == null || grokerSubdomain == "") {
 		log.error "streaming url is currently null"
 		return
 	}
+	def accessKey = atomicState.accessKey
+	def bucketKey = atomicState.bucketKey
 	// can't ship if access key and bucket key are null, so finish trying
-	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
+	if (accessKey == null || bucketKey == null) {
 		return
 	}
 
 	def eventPost = [
-		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
+		uri: "https://${grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${atomicState.bucketKey}",
-			"X-IS-AccessKey": "${atomicState.accessKey}",
+			"X-IS-BucketKey": "${bucketKey}",
+			"X-IS-AccessKey": "${accessKey}",
 			"Accept-Version": "0.0.2"
 		],
-		body: atomicState.eventBuffer
+		body: eventBuffer
 	]
 
 	try {
@@ -389,13 +389,10 @@ def tryShipEvents() {
 			log.debug "shipped events and got ${resp.status}"
 			if (resp.status >= 400) {
 				log.error "shipping failed... ${resp.data}"
-			} else {
-				// clear the buffer
-				atomicState.eventBuffer = []
 			}
 		}
 	} catch (e) {
 		log.error "shipping events failed: $e"
 	}
-	
+
 }

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -13,11 +13,11 @@ definition(
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up@2x.png",
 	oauth: true,
-    usePreferencesForAuthorization: false
+    usePreferencesForAuthorization: false,
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "serverUrl"
 }
 
 preferences {
@@ -28,16 +28,13 @@ mappings {
 	path("/receivedToken") { action: [ POST: "receivedToken", GET: "receivedToken"] }
 	path("/receiveToken") { action: [ POST: "receiveToken", GET: "receiveToken"] }
 	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
+    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}    
 	path("/oauth/callback") { action: [ GET: "callback" ] }
 }
 
-def getSmartThingsClientId() {
-   return appSettings.clientId
-}
-
-def getSmartThingsClientSecret() {
-   return appSettings.clientSecret
-}
+def getServerUrl() { return "https://graph.api.smartthings.com" }
+def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
+def buildRedirectUrl(page) { return buildActionUrl(page) }
 
 def callback() {
 	def redirectUrl = null
@@ -63,9 +60,8 @@ def callback() {
 				// SmartThings code, which we ignore, as we don't need to exchange for an access token.
 				// Instead, go initiate the Jawbone OAuth flow.
 				log.debug "Executing callback redirect to auth page"
-			    def stcid = getSmartThingsClientId()
 			    state.oauthInitState = UUID.randomUUID().toString()
-			    def oauthParams = [response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
+			    def oauthParams = [response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
 				redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
 			}
 		} else {
@@ -84,10 +80,11 @@ def authPage() {
 			createAccessToken()
 		}
         description = "Click to enter Jawbone Credentials"
-        def redirectUrl = oauthInitUrl()
-        // log.debug "RedirectURL = ${redirectUrl}"
-        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install:false) {
-               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", description:description }
+        def redirectUrl = buildRedirectUrl
+        log.debug "RedirectURL = ${redirectUrl}"
+        def donebutton= state.JawboneAccessToken != null 
+        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install: donebutton) {
+               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", state: hast ,description:description }
         }
     } else {
         description = "Jawbone Credentials Already Entered." 
@@ -99,17 +96,14 @@ def authPage() {
 
 def oauthInitUrl() {
     log.debug "oauthInitUrl"
-    def stcid = getSmartThingsClientId()
     state.oauthInitState = UUID.randomUUID().toString()
-    def oauthParams = [ response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: buildRedirectUrl("receiveToken") ]
-	return "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}"
+    def oauthParams = [ response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback" ]
+	redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
 	log.debug "receiveToken"
-    def stcid = getSmartThingsClientId()
-    def oauthClientSecret = getSmartThingsClientSecret()
-    def oauthParams = [ client_id: stcid, client_secret: oauthClientSecret, grant_type: "authorization_code", code: params.code ]
+    def oauthParams = [ client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}",
     ]
@@ -231,18 +225,10 @@ String toQueryString(Map m) {
 	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
 }
 
-def getServerUrl() { return appSettings.serverUrl ?: "https://graph.api.smartthings.com" }
-
-def buildRedirectUrl(page) {
-    // log.debug "buildRedirectUrl"
-    // /api/token/:st_token/smartapps/installations/:id/something
-    return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
-}
-
 def validateCurrentToken() {
 	log.debug "validateCurrentToken"
     def url = "https://jawbone.com/nudge/api/v.1.1/users/@me/refreshToken"
-    def requestBody = "secret=${getSmartThingsClientSecret()}"
+    def requestBody = "secret=${appSettings.clientSecret}"
 	
 	try {
 		httpPost(uri: url, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],  body: requestBody) {response ->
@@ -256,9 +242,7 @@ def validateCurrentToken() {
         if (e.statusCode == 401) { // token is expired
         	log.debug "Access token is expired"
         	if (state.refreshToken) { // if we have this we are okay
-            	def stcid = getSmartThingsClientId()
-    			def oauthClientSecret = getSmartThingsClientSecret()
-    			def oauthParams = [client_id: stcid, client_secret: oauthClientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
+    			def oauthParams = [client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
         		def tokenUrl = "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}"
         		def params = [
           			uri: tokenUrl
@@ -287,9 +271,10 @@ def validateCurrentToken() {
 }
 
 def initialize() {
-	def hookUrl = "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
-    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"
-    log.debug "Callback URL: $webhook"        
+    log.debug "Callback URL - Webhook"  
+	def localServerUrl = getApiServerUrl() 
+	def hookUrl = "${localServerUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
+    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"      
 	httpPost(uri: webhook, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ])
 }
 
@@ -327,7 +312,6 @@ def setup() {
 }
 
 def installed() {
-	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -340,7 +324,6 @@ def installed() {
 }
 
 def updated() {
-	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -499,4 +482,4 @@ def hookEventHandler() {
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
-}
+}

smartapps/macstainless/lights-on-when-door-opens-after-sundown.src/lights-on-when-door-opens-after-sundown.groovy

@@ -1,53 +0,0 @@
-/**
- *
- *  Lights On When Door Open After Sundown
- *
- *  Based on "Turn It On When It Opens" by SmartThings
- *
- *  Author: Aaron Crocco
- */
-preferences {
-	section("When the door opens..."){
-		input "contact1", "capability.contactSensor", title: "Where?"
-	}
-	section("Turn on these lights..."){
-		input "switches", "capability.switch", multiple: true
-	}
-	section("and change mode to...") {
-		input "HomeAfterDarkMode", "mode", title: "Mode?"
-	}
-}
-
-
-def installed()
-{
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def updated()
-{
-	unsubscribe()
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def contactOpenHandler(evt) {
-	log.debug "$evt.value: $evt, $settings"
-	
-	//Check current time to see if it's after sundown.
-	def s = getSunriseAndSunset(zipCode: zipCode, sunriseOffset: sunriseOffset, sunsetOffset: sunsetOffset)
-	def now = new Date()
-	def setTime = s.sunset
-	log.debug "Sunset is at $setTime. Current time is $now"
-        
-        
-    if (setTime.before(now)) {	//Executes only if it's after sundown.
-			
-		log.trace "Turning on switches: $switches"
-		switches.on()
-		log.trace "Changing house mode to $HomeAfterDarkMode"
-        setLocationMode(HomeAfterDarkMode)
-        sendPush("Welcome home! Changing mode to $HomeAfterDarkMode.")
-
-	}   
-}
-

smartapps/mager/weather-underground-pws-connect.src/weather-underground-pws-connect.groovy

@@ -26,7 +26,8 @@ definition(
     iconUrl: "http://i.imgur.com/HU0ANBp.png",
     iconX2Url: "http://i.imgur.com/HU0ANBp.png",
     iconX3Url: "http://i.imgur.com/HU0ANBp.png",
-    oauth: true)
+    oauth: true,
+    singleInstance: true)
 
 
 preferences {

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -0,0 +1,389 @@
+/**
+ *  Required PlantLink Connector
+ *  This SmartApp forwards the raw data of the deviceType to myplantlink.com
+ *  and returns it back to your device after calculating soil and plant type.
+ *
+ *  Copyright 2015 Oso Technologies
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+import groovy.json.JsonBuilder
+import java.util.regex.Matcher
+import java.util.regex.Pattern
+ 
+definition(
+    name: "PlantLink Connector",
+    namespace: "Osotech",
+    author: "Oso Technologies",
+    description: "This SmartApp connects to myplantlink.com and forwards the device data to it so it can calculate easy to read plant status for your specific plant's needs.",
+    category:  "Convenience",
+    iconUrl:   "https://dashboard.myplantlink.com/images/apple-touch-icon-76x76-precomposed.png",
+    iconX2Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-120x120-precomposed.png",
+    iconX3Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-152x152-precomposed.png"
+) {
+    appSetting "client_id"
+    appSetting "client_secret"
+    appSetting "https_plantLinkServer"
+}
+
+preferences {
+    page(name: "auth", title: "Step 1 of 2", nextPage:"deviceList", content:"authPage")
+    page(name: "deviceList", title: "Step 2 of 2", install:true, uninstall:false){
+        section {
+            input "plantlinksensors", "capability.sensor", title: "Select PlantLink sensors", multiple: true
+        }
+    }
+}
+
+mappings {
+    path("/swapToken") {
+        action: [
+                GET: "swapToken"
+        ]
+    }
+}
+
+def authPage(){
+    if(!atomicState.accessToken){
+        createAccessToken()
+        atomicState.accessToken = state.accessToken
+    }
+
+	def redirectUrl = oauthInitUrl()
+    def uninstallAllowed = false
+    def oauthTokenProvided = false
+    if(atomicState.authToken){
+        uninstallAllowed = true
+        oauthTokenProvided = true
+    }
+
+    if (!oauthTokenProvided) {
+        return dynamicPage(name: "auth", title: "Step 1 of 2", nextPage:null, uninstall:uninstallAllowed) {
+            section(){
+                href(name:"login",
+                     url:redirectUrl, 
+                     style:"embedded",
+                     title:"PlantLink", 
+                     image:"https://dashboard.myplantlink.com/images/PLlogo.png", 
+                     description:"Tap to login to myplantlink.com")
+            }
+        }
+    }else{
+        return dynamicPage(name: "auth", title: "Step 1 of 2 - Completed", nextPage:"deviceList", uninstall:uninstallAllowed) {
+	        section(){
+               paragraph "You are logged in to myplantlink.com, tap next to continue", image: iconUrl
+ 			   href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
+            }
+        }
+    }
+}
+
+def installed() {
+    log.debug "Installed with settings: ${settings}"
+    initialize()
+}
+
+def updated() {
+    log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+def uninstalled() {
+    if (plantlinksensors){
+        plantlinksensors.each{ sensor_device ->
+            sensor_device.setInstallSmartApp("needSmartApp")
+        }
+    }
+}
+
+def initialize() {
+    atomicState.attached_sensors = [:]
+    if (plantlinksensors){
+        subscribe(plantlinksensors, "moisture_status", moistureHandler)
+        subscribe(plantlinksensors, "battery_status", batteryHandler)
+        plantlinksensors.each{ sensor_device ->
+            sensor_device.setStatusIcon("Waiting on First Measurement")
+            sensor_device.setInstallSmartApp("connectedToSmartApp")
+        }
+    }
+}
+
+def dock_sensor(device_serial, expected_plant_name) {
+    def docking_body_json_builder = new JsonBuilder([version: '1c', smartthings_device_id: device_serial])
+    def docking_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/smartthings/links",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+            body: docking_body_json_builder.toString()
+    ]
+    def plant_post_body_map = [
+            plant_type_key: 999999,
+            soil_type_key : 1000004
+    ]
+    def plant_post_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/plants",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+    ]
+    log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
+    httpPost(docking_params) { docking_response ->
+        if (parse_api_response(docking_response, "Docking a link")) {
+            if (docking_response.data.plants.size() == 0) {
+                log.debug "creating plant for - ${expected_plant_name}"
+                plant_post_body_map["name"] = expected_plant_name
+                plant_post_body_map['links_key'] = [docking_response.data.key]
+                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
+                plant_post_params["body"] = plant_post_body_json_builder.toString()
+                httpPost(plant_post_params) { plant_post_response ->
+                    if(parse_api_response(plant_post_response, 'creating plant')){
+                        def attached_map = atomicState.attached_sensors
+                        attached_map[device_serial] = plant_post_response.data
+                        atomicState.attached_sensors = attached_map
+                    }
+                }
+            } else {
+                def plant = docking_response.data.plants[0]
+                def attached_map = atomicState.attached_sensors
+                attached_map[device_serial] = plant
+                atomicState.attached_sensors = attached_map
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+            }
+        }
+    }
+    return true
+}
+
+def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
+    def plant_put_params = [
+		uri : appSettings.https_plantLinkServer,
+        headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+        contentType : "application/json"
+    ]
+    if (plant.name != expected_plant_name) {
+        log.debug "updating plant for - ${expected_plant_name}"
+        plant_put_params["path"] = "/api/v1/plants/${plant.key}"
+        def plant_put_body_map = [
+			name: expected_plant_name
+        ]
+        def plant_put_body_json_builder = new JsonBuilder(plant_put_body_map)
+        plant_put_params["body"] = plant_put_body_json_builder.toString()
+        httpPut(plant_put_params) { plant_put_response ->
+            parse_api_response(plant_put_response, 'updating plant name')
+        }
+    }
+}
+
+def moistureHandler(event){
+    def expected_plant_name = "SmartThings - ${event.displayName}"
+    def device_serial = getDeviceSerialFromEvent(event)
+    
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
+        dock_sensor(device_serial, expected_plant_name)
+    }else{
+        def measurement_post_params = [
+                uri: appSettings.https_plantLinkServer,
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                contentType: "application/json",
+                body: event.value
+        ]
+        httpPost(measurement_post_params) { measurement_post_response ->
+            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
+                    measurement_post_response.data.size() >0){
+                def measurement = measurement_post_response.data[0]
+                def plant =  measurement.plant
+                log.debug plant
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+                plantlinksensors.each{ sensor_device ->
+                    if (sensor_device.id == event.deviceId){
+                        sensor_device.setStatusIcon(plant.status)
+                        if (plant.last_measurements && plant.last_measurements[0].moisture){
+                            sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
+                        }
+                        if (plant.last_measurements && plant.last_measurements[0].battery){
+                            sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
+                        }
+                    }
+                }
+            }
+        }
+    }
+}
+
+def batteryHandler(event){
+    def expected_plant_name = "SmartThings - ${event.displayName}"
+    def device_serial = getDeviceSerialFromEvent(event)
+    
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
+        dock_sensor(device_serial, expected_plant_name)
+    }else{
+        def measurement_post_params = [
+                uri: appSettings.https_plantLinkServer,
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                contentType: "application/json",
+                body: event.value
+        ]
+        httpPost(measurement_post_params) { measurement_post_response ->
+            parse_api_response(measurement_post_response, 'creating battery measurement')
+        }
+    }
+}
+
+def getDeviceSerialFromEvent(event){
+    def pattern = /.*"zigbeedeviceid"\s*:\s*"(\w+)".*/
+    def match_result = (event.value =~ pattern)
+    return match_result[0][1]
+}
+
+def oauthInitUrl(){
+	atomicState.oauthInitState = UUID.randomUUID().toString()
+    def oauthParams = [
+            response_type: "code",
+            client_id: appSettings.client_id,
+            state: atomicState.oauthInitState,
+            redirect_uri: buildRedirectUrl()
+    ]
+    return appSettings.https_plantLinkServer + "/oauth/oauth2/authorize?" + toQueryString(oauthParams)
+}
+
+def buildRedirectUrl(){
+    return getServerUrl() + "/api/token/${atomicState.accessToken}/smartapps/installations/${app.id}/swapToken"
+}
+
+def swapToken(){
+    def code = params.code
+    def oauthState = params.state
+    def stcid = appSettings.client_id
+    def postParams = [
+            method: 'POST',
+            uri: "https://oso-tech.appspot.com",
+            path: "/api/v1/oauth-token",
+            query: [grant_type:'authorization_code', code:params.code, client_id:stcid,
+                    client_secret:appSettings.client_secret, redirect_uri: buildRedirectUrl()],
+    ]
+
+    def jsonMap
+    httpPost(postParams) { resp ->
+        jsonMap = resp.data
+    }
+
+    atomicState.refreshToken = jsonMap.refresh_token
+    atomicState.authToken = jsonMap.access_token
+
+    def html = """
+<html>
+<head>
+<meta name="viewport" content="width=device-width, initial-scale=1">
+<style>
+	.container {
+		padding:25px;
+	}
+	.flex1 {
+    	width:33%;
+		float:left;
+		text-align: center;
+	}
+	p {
+		font-size: 2em;
+		font-family: Verdana, Geneva, sans-serif;
+		text-align: center;
+		color: #777;
+	}
+</style>
+</head>
+<body>
+	<div class="container">
+		<div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
+		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
+		<br clear="all">
+  </div>
+  <div class="container">
+		<p>Your PlantLink Account is now connected to SmartThings!</p>
+		<p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
+	</div>
+</body>
+</html>
+"""
+    render contentType: 'text/html', data: html
+}
+
+private refreshAuthToken() {
+    def stcid = appSettings.client_id
+    def refreshParams = [
+            method: 'POST',
+            uri: "https://hardware-dot-oso-tech.appspot.com",
+            path: "/api/v1/oauth-token",
+            query: [grant_type:'refresh_token', code:"${atomicState.refreshToken}", client_id:stcid,
+                    client_secret:appSettings.client_secret],
+    ]
+    try{
+        def jsonMap
+        httpPost(refreshParams) { resp ->
+            if(resp.status == 200){
+                log.debug "OAuth Token refreshed"
+                jsonMap = resp.data
+                if (resp.data) {
+                    atomicState.refreshToken = resp?.data?.refresh_token
+                    atomicState.authToken = resp?.data?.access_token
+                    if (data?.action && data?.action != "") {
+                        log.debug data.action
+                        "{data.action}"()
+                        data.action = ""
+                    }
+                }
+                data.action = ""
+            }else{
+                log.debug "refresh failed ${resp.status} : ${resp.status.code}"
+            }
+        }
+    }
+    catch(Exception e){
+        log.debug "caught exception refreshing auth token: " + e
+    }
+}
+
+def parse_api_response(resp, message) {
+    if (resp.status == 200) {
+        return true
+    } else {
+        log.error "sent ${message} Json & got http status ${resp.status} - ${resp.status.code}"
+        if (resp.status == 401) {
+            refreshAuthToken()
+            return false
+        } else {
+            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.", true)
+            return false
+        }
+    }
+}
+
+def getServerUrl() { 
+	return "https://graph.api.smartthings.com" 
+}
+
+def debugEvent(message, displayEvent) {
+    def results = [
+            name: "appdebug",
+            descriptionText: message,
+            displayed: displayEvent
+    ]
+    log.debug "Generating AppDebug Event: ${results}"
+    sendEvent (results)
+}
+
+def toQueryString(Map m){
+    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}

smartapps/smart-auto-lock-unlock/smart-auto-lock-unlock.src/smart-auto-lock-unlock.groovy

@@ -14,8 +14,8 @@
  *
  */
 definition(
-    name: "Smart Lock / Unlock",
-    namespace: "",
+    name: "Smart Auto Lock / Unlock",
+    namespace: "smart-auto-lock-unlock",
     author: "Arnaud",
     description: "Automatically locks door X minutes after being closed and keeps door unlocked if door is open.",
     category: "Safety & Security",

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -21,7 +21,8 @@
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -0,0 +1,341 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Bose® SoundTouch® Control
+ *
+ *  Author: SmartThings & Joe Geiger
+ *
+ *  Date: 2015-30-09
+ */
+definition(
+    name: "Bose® SoundTouch® Control",
+    namespace: "smartthings",
+    author: "SmartThings & Joe Geiger",
+    description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	page(name: "mainPage", title: "Control your Bose® SoundTouch® when something happens", install: true, uninstall: true)
+	page(name: "timeIntervalInput", title: "Only during a certain time") {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage") {
+		def anythingSet = anythingSet()
+		if (anythingSet) {
+			section("When..."){
+				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
+			}
+		}
+		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
+			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
+		}
+		section("Perform this action"){
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "play", options: [
+				"Turn On & Play",
+				"Turn Off",
+				"Toggle Play/Pause",
+				"Skip to Next Track",
+				"Skip to Beginning/Previous Track",
+                "Play Preset 1",
+                "Play Preset 2",
+                "Play Preset 3",
+                "Play Preset 4",
+                "Play Preset 5",
+                "Play Preset 6"
+			]
+		}
+		section {
+			input "bose", "capability.musicPlayer", title: "Bose® SoundTouch® music player", required: true
+		}
+		section("More options", hideable: true, hidden: true) {
+			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false
+			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+			if (settings.modes) {
+            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+            }
+			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
+		}
+		section([mobileOnly:true]) {
+			label title: "Assign a name", required: false
+			mode title: "Set for specific mode(s)"
+		}
+	}
+}
+
+private anythingSet() {
+	for (name in ["motion","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","smoke","water","button1","triggerModes","timeOfDay"]) {
+		if (settings[name]) {
+			return true
+		}
+	}
+	return false
+}
+
+private ifUnset(Map options, String name, String capability) {
+	if (!settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+private ifSet(Map options, String name, String capability) {
+	if (settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribeToEvents()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	unschedule()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	log.trace "subscribeToEvents()"
+	subscribe(app, appTouchHandler)
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(smoke, "smoke.detected", eventHandler)
+	subscribe(smoke, "smoke.tested", eventHandler)
+	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
+	subscribe(water, "water.wet", eventHandler)
+	subscribe(button1, "button.pushed", eventHandler)
+
+	if (triggerModes) {
+		subscribe(location, modeChangeHandler)
+	}
+
+	if (timeOfDay) {
+		schedule(timeOfDay, scheduledTimeHandler)
+	}
+}
+
+def eventHandler(evt) {
+	if (allOk) {
+		def lastTime = state[frequencyKey(evt)]
+		if (oncePerDayOk(lastTime)) {
+			if (frequency) {
+				if (lastTime == null || now() - lastTime >= frequency * 60000) {
+					takeAction(evt)
+				}
+				else {
+					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
+				}
+			}
+			else {
+				takeAction(evt)
+			}
+		}
+		else {
+			log.debug "Not taking action because it was already taken today"
+		}
+	}
+}
+
+def modeChangeHandler(evt) {
+	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
+	if (evt.value in triggerModes) {
+		eventHandler(evt)
+	}
+}
+
+def scheduledTimeHandler() {
+	eventHandler(null)
+}
+
+def appTouchHandler(evt) {
+	takeAction(evt)
+}
+
+private takeAction(evt) {
+	log.debug "takeAction($actionType)"
+	def options = [:]
+	if (volume) {
+		bose.setLevel(volume as Integer)
+		options.delay = 1000
+	}
+
+	switch (actionType) {
+		case "Turn On & Play":
+			options ? bose.on(options) : bose.on()
+			break
+		case "Turn Off":
+			options ? bose.off(options) : bose.off()
+			break
+		case "Toggle Play/Pause":
+			def currentStatus = bose.currentValue("playpause")
+			if (currentStatus == "play") {
+				options ? bose.pause(options) : bose.pause()
+			}
+			else if (currentStatus == "pause") {
+				options ? bose.play(options) : bose.play()
+			}
+			break
+		case "Skip to Next Track":
+			options ? bose.nextTrack(options) : bose.nextTrack()
+			break
+		case "Skip to Beginning/Previous Track":
+			options ? bose.previousTrack(options) : bose.previousTrack()
+			break
+        case "Play Preset 1":
+			options ? bose.preset1(options) : bose.preset1()
+			break
+        case "Play Preset 2":
+			options ? bose.preset2(options) : bose.preset2()
+			break 
+        case "Play Preset 3":
+			options ? bose.preset3(options) : bose.preset3()
+			break
+        case "Play Preset 4":
+			options ? bose.preset4(options) : bose.preset4()
+			break
+        case "Play Preset 5":
+			options ? bose.preset5(options) : bose.preset5()
+			break
+        case "Play Preset 6":
+			options ? bose.preset6(options) : bose.preset6()
+			break
+		default:
+			log.error "Action type '$actionType' not defined"
+	}
+
+	if (frequency) {
+		state.lastActionTimeStamp = now()
+	}
+}
+
+private frequencyKey(evt) {
+	//evt.deviceId ?: evt.value
+	"lastActionTimeStamp"
+}
+
+private dayString(Date date) {
+	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
+	if (location.timeZone) {
+		df.setTimeZone(location.timeZone)
+	}
+	else {
+		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+	}
+	df.format(date)
+}
+
+private oncePerDayOk(Long lastTime) {
+	def result = true
+	if (oncePerDay) {
+		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
+		log.trace "oncePerDayOk = $result"
+	}
+	result
+}
+
+// TODO - centralize somehow
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting, location?.timeZone).time
+		def stop = timeToday(ending, location?.timeZone).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private timeIntervalLabel()
+{
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}
+// TODO - End Centralize

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -246,6 +246,9 @@ def toggle(devices) {
 	else if (devices*.currentValue('lock').contains('locked')) {
 		devices.unlock()
 	}
+	else if (devices*.currentValue('lock').contains('unlocked')) {
+		devices.lock()
+	}
 	else if (devices*.currentValue('alarm').contains('off')) {
         devices.siren()
     }

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -1,7 +1,7 @@
 /**
  *  Every Element
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,349 +14,555 @@
  *
  */
 definition(
-	name: "Every Element",
-	namespace: "smartthings/examples",
-	author: "SmartThings",
-	description: "Every element demonstration app",
-	category: "SmartThings Internal",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
+        name: "Every Element",
+        namespace: "smartthings/examples",
+        author: "SmartThings",
+        description: "Every element demonstration app",
+        category: "SmartThings Internal",
+        iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+        iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
 preferences {
-	page(name: "firstPage")
-	page(name: "inputPage")
-	page(name: "appPage")
-	page(name: "labelPage")
-	page(name: "modePage")
-	page(name: "paragraphPage")
-	page(name: "iconPage")
-	page(name: "hrefPage")
-	page(name: "buttonsPage")
-	page(name: "imagePage")
-	page(name: "videoPage")
-	page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
-	page(name: "flattenedPage")
+    // landing page
+    page(name: "firstPage")
+
+    // PageKit
+    page(name: "buttonsPage")
+    page(name: "imagePage")
+    page(name: "inputPage")
+    page(name: "inputBooleanPage")
+    page(name: "inputIconPage")
+    page(name: "inputImagePage")
+    page(name: "inputDevicePage")
+    page(name: "inputCapabilityPage")
+    page(name: "inputRoomPage")
+    page(name: "inputModePage")
+    page(name: "inputSelectionPage")
+    page(name: "inputHubPage")
+    page(name: "inputContactBookPage")
+    page(name: "inputTextPage")
+    page(name: "inputTimePage")
+    page(name: "appPage")
+    page(name: "hrefPage")
+    page(name: "paragraphPage")
+    page(name: "videoPage")
+    page(name: "labelPage")
+    page(name: "modePage")
+
+    // Every element helper pages
+    page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
+    page(name: "flattenedPage")
 }
 
 def firstPage() {
-	dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
-		section() {
-			href(page: "inputPage", title: "Element: 'input'")
-			href(page: "appPage", title: "Element: 'app'")
-			href(page: "labelPage", title: "Element: 'label'")
-			href(page: "modePage", title: "Element: 'mode'")
-			href(page: "paragraphPage", title: "Element: 'paragraph'")
-			href(page: "iconPage", title: "Element: 'icon'")
-			href(page: "hrefPage", title: "Element: 'href'")
-			href(page: "buttonsPage", title: "Element: 'buttons'")
-			href(page: "imagePage", title: "Element: 'image'")
-			href(page: "videoPage", title: "Element: 'video'")
-		}
-		section() {
-			href(page: "flattenedPage", title: "All of the above elements on a single page")
-		}
-	}
+    dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
+        section {
+            href(page: "appPage", title: "Element: 'app'")
+            href(page: "buttonsPage", title: "Element: 'buttons'")
+            href(page: "hrefPage", title: "Element: 'href'")
+            href(page: "imagePage", title: "Element: 'image'")
+            href(page: "inputPage", title: "Element: 'input'")
+            href(page: "labelPage", title: "Element: 'label'")
+            href(page: "modePage", title: "Element: 'mode'")
+            href(page: "paragraphPage", title: "Element: 'paragraph'")
+            href(page: "videoPage", title: "Element: 'video'")
+        }
+        section {
+            href(page: "flattenedPage", title: "All of the above elements on a single page")
+        }
+    }
 }
 
 def inputPage() {
-	dynamicPage(name: "inputPage", title: "Every 'input' type") {
-		section("enum") {
-			input(type: "enum", name: "enumRefresh", title: "submitOnChange:true", required: false, multiple: true, options: ["one", "two", "three"], submitOnChange: true)
-			if (enumRefresh) {
-				paragraph "${enumRefresh}"
-			}
-			input(type: "enum", name: "enumSegmented", title: "style:segmented", required: false, multiple: true, options: ["one", "two", "three"], style: "segmented")
-			input(type: "enum", name: "enum", title: "required:false, multiple:false", required: false, multiple: false, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumRequired", title: "required:true", required: true, multiple: false, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumMultiple", title: "multiple:true", required: false, multiple: true, options: ["one", "two", "three"])
-			input(type: "enum", name: "enumWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, options: ["one", "two", "three"], image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-			input(type: "enum", name: "enumWithGroupedOptions", title: "groupedOptions", description: "This enum has grouped options", required: false, multiple: true, groupedOptions: [
-				[
-					title : "the group title that is displayed",
-					order : 0, // the order of the group; 0-based
-					image : "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", // not yet supported
-					values: [
-						[
-							key  : "the value that will be placed in SmartApp settings.", // such as a device id
-							value: "the title of the selectable option that is displayed", // such as a device name
-							order: 0 // the order of the option
-						]
-					]
-				],
-				[
-					title : "the second group title that is displayed",
-					order : 1, // the order of the group; 0-based
-					image : null, // not yet supported
-					values: [
-						[
-							key  : "some_device_id",
-							value: "some_device_name",
-							order: 1 // the order of the option. This option will appear second in the list even though it is the first option defined in this map
-						],
-						[
-							key  : "some_other_device_id",
-							value: "some_other_device_name",
-							order: 0 // the order of the option. This option will appear first in the list even though it is not the first option defined in this map
-						]
-					]
-				]
-			])
-		}
-		section("text") {
-			input(type: "text", name: "text", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "text", name: "textRequired", title: "required:true", required: true, multiple: false)
-			input(type: "text", name: "textWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("number") {
-			input(type: "number", name: "number", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "number", name: "numberRequired", title: "required:true", required: true, multiple: false)
-			input(type: "number", name: "numberWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("boolean") {
-			input(type: "boolean", name: "boolean", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "boolean", name: "booleanWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("password") {
-			input(type: "password", name: "password", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "password", name: "passwordRequired", title: "required:true", required: true, multiple: false)
-			input(type: "password", name: "passwordWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("phone") {
-			input(type: "phone", name: "phone", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "phone", name: "phoneRequired", title: "required:true", required: true, multiple: false)
-			input(type: "phone", name: "phoneWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("email") {
-			input(type: "email", name: "email", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "email", name: "emailRequired", title: "required:true", required: true, multiple: false)
-			input(type: "email", name: "emailWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("decimal") {
-			input(type: "decimal", name: "decimal", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "decimal", name: "decimalRequired", title: "required:true", required: true, multiple: false)
-			input(type: "decimal", name: "decimalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("mode") {
-			input(type: "mode", name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "mode", name: "modeRequired", title: "required:true", required: true, multiple: false)
-			input(type: "mode", name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "mode", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("icon") {
-			input(type: "icon", name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "icon", name: "iconRequired", title: "required:true", required: true, multiple: false)
-			input(type: "icon", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("capability") {
-			input(type: "capability.switch", name: "capability", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "capability.switch", name: "capabilityRequired", title: "required:true", required: true, multiple: false)
-			input(type: "capability.switch", name: "capabilityMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "capability.switch", name: "capabilityWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("hub") {
-			input(type: "hub", name: "hub", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "hub", name: "hubRequired", title: "required:true", required: true, multiple: false)
-			input(type: "hub", name: "hubMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "hub", name: "hubWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("device") {
-			input(type: "device.switch", name: "device", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "device.switch", name: "deviceRequired", title: "required:true", required: true, multiple: false)
-			input(type: "device.switch", name: "deviceMultiple", title: "multiple:true", required: false, multiple: true)
-			input(type: "device.switch", name: "deviceWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("time") {
-			input(type: "time", name: "time", title: "required:false, multiple:false", required: false, multiple: false)
-			input(type: "time", name: "timeRequired", title: "required:true", required: true, multiple: false)
-			input(type: "time", name: "timeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-		section("contact-book") {
-			input("recipients", "contact", title: "Notify", description: "Send notifications to") {
-				input(type: "phone", name: "phone", title: "Send text message to", required: false, multiple: false)
-				input(type: "boolean", name: "boolean", title: "Send push notification", required: false, multiple: false)
-			}
-		}
-	}
+    dynamicPage(name: "inputPage", title: "Links to every 'input' element") {
+        section {
+            href(page: "inputBooleanPage", title: "to boolean page")
+            href(page: "inputIconPage", title: "to icon page")
+            href(page: "inputImagePage", title: "to image page")
+            href(page: "inputSelectionPage", title: "to selection page")
+            href(page: "inputTextPage", title: "to text page")
+            href(page: "inputTimePage", title: "to time page")
+        }
+        section("subsets of selection input") {
+            href(page: "inputDevicePage", title: "to device selection page")
+            href(page: "inputCapabilityPage", title: "to capability selection page")
+            href(page: "inputRoomPage", title: "to room selection page")
+            href(page: "inputModePage", title: "to mode selection page")
+            href(page: "inputHubPage", title: "to hub selection page")
+            href(page: "inputContactBookPage", title: "to contact-book selection page")
+        }
+    }
+}
+
+def inputBooleanPage() {
+    dynamicPage(name: "inputBooleanPage") {
+        section {
+            paragraph "The `required` and `multiple` attributes have no effect because the value will always be either `true` or `false`"
+        }
+        section {
+            input(type: "boolean", name: "booleanWithoutDescription", title: "without description", description: null)
+            input(type: "boolean", name: "booleanWithDescription", title: "with description", description: "This has a description")
+        }
+        section("defaultValue: 'true'") {
+            input(type: "boolean", name: "booleanWithDefaultValue", title: "", description: "", defaultValue: "true")
+        }
+        section("with image") {
+            input(type: "boolean", name: "booleanWithoutDescriptionWithImage", title: "without description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", description: null)
+            input(type: "boolean", name: "booleanWithDescriptionWithImage", title: "with description", description: "This has a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputIconPage() {
+    dynamicPage(name: "inputIconPage") {
+        section {
+            paragraph "`description` is not displayed for icon elements"
+            paragraph "`multiple` has no effect because you can only choose a single icon"
+        }
+        section("required: true") {
+            input(type: "icon", name: "iconRequired", title: "without description", required: true)
+            input(type: "icon", name: "iconRequiredWithDescription", title: "with description", description: "this is a description", required: true)
+        }
+        section("with image") {
+            paragraph "The image specified will be replaced after an icon is selected"
+            input(type: "icon", name: "iconwithImage", title: "without description", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputImagePage() {
+    dynamicPage(name: "inputImagePage") {
+        section {
+            paragraph "This only exists in DeviceTypes. Someone should do something about that. (glares at MikeDave)"
+            paragraph "Go to the device preferences of a Mobile Presence device to see it in action"
+            paragraph "If you try to set the value of this, it will not behave as it would in Device Preferences"
+            input(type: "image", title: "This is kind of what it looks like", required: false)
+        }
+    }
+}
+
+
+def optionsGroup(List groups, String title) {
+    def group = [values:[], order: groups.size()]
+    group.title = title ?: ""
+    groups << group
+    return groups
+}
+def addValues(List groups, String key, String value) {
+    def lastGroup = groups[-1]
+    lastGroup["values"] << [
+            key: key,
+            value: value,
+            order: lastGroup["values"].size()
+    ]
+    return groups
+}
+def listToMap(List original) {
+    original.inject([:]) { result, v ->
+        result[v] = v
+        return result
+    }
+}
+def addGroup(List groups, String title, values) {
+    if (values instanceof List) {
+        values = listToMap(values)
+    }
+
+    values.inject(optionsGroup(groups, title)) { result, k, v ->
+        return addValues(result, k, v)
+    }
+    return groups
+}
+def addGroup(values) {
+    addGroup([], null, values)
+}
+/* Example usage of options builder
+
+// Creating grouped options
+    def newGroups = []
+    addGroup(newGroups, "first group", ["foo", "bar", "baz"])
+    addGroup(newGroups, "second group", [zero: "zero", one: "uno", two: "dos", three: "tres"])
+
+// simple list
+    addGroup(["a", "b", "c"])
+
+// simple map
+    addGroup(["a": "yes", "b": "no", "c": "maybe"])​​​​
+*/
+
+
+def inputSelectionPage() {
+
+    def englishOptions = ["One", "Two", "Three"]
+    def spanishOptions = ["Uno", "Dos", "Tres"]
+    def groupedOptions = []
+    addGroup(groupedOptions, "English", englishOptions)
+    addGroup(groupedOptions, "Spanish", spanishOptions)
+
+    dynamicPage(name: "inputSelectionPage") {
+
+        section("options variations") {
+            paragraph "tap these elements and look at the differences when selecting an option"
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
+        }
+
+        section("list vs map") {
+            paragraph "These should be identical in UI, but are different in code and will produce different settings"
+            input(type: "enum", name: "selectionList", title: "Choose a device", description: "settings will be something like ['Device1 Label']", groupedOptions: addGroup(["Device1 Label", "Device2 Label"]))
+            input(type: "enum", name: "selectionMap", title: "Choose a device", description: "settings will be something like ['device1-id']", groupedOptions: addGroup(["device1-id": "Device1 Label", "device2-id": "Device2 Label"]))
+        }
+
+        section("segmented") {
+            paragraph "segmented should only work if there are either 2 or 3 options to choose from"
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
+
+            paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
+            input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
+            input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
+
+            paragraph "specifying defaultValue still works with segmented selection elements"
+            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
+        }
+
+        section("required: true") {
+            input(type: "enum", name: "selectionRequired", title: "This is required", description: "It should look different when nothing is selected", groupedOptions: addGroup(["only option"]), required: true)
+        }
+
+        section("multiple: true") {
+            input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
+        }
+
+        section("with image") {
+            input(type: "enum", name: "selectionWithImage", title: "This has an image", description: "and a description", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputTextPage() {
+    dynamicPage(name: "inputTextPage", title: "Every 'text' variation") {
+        section("style and functional differences") {
+            input(type: "text", name: "textRequired", title: "required: true", description: "This should look different when nothing has been entered", required: true)
+            input(type: "text", name: "textWithImage", title: "with image", description: "This should look different when nothing has been entered", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", required: false)
+        }
+        section("text") {
+            input(type: "text", name: "text", title: "This has an alpha-numeric keyboard", description: "no special formatting", required: false)
+        }
+        section("password") {
+            input(type: "password", name: "password", title: "This has an alpha-numeric keyboard", description: "masks value", required: false)
+        }
+        section("email") {
+            input(type: "email", name: "email", title: "This has an email-specific keyboard", description: "no special formatting", required: false)
+        }
+        section("phone") {
+            input(type: "phone", name: "phone", title: "This has a numeric keyboard", description: "formatted for phone numbers", required: false)
+        }
+        section("decimal") {
+            input(type: "decimal", name: "decimal", title: "This has an numeric keyboard with decimal point", description: "no special formatting", required: false)
+        }
+        section("number") {
+            input(type: "number", name: "number", title: "This has an numeric keyboard without decimal point", description: "no special formatting", required: false)
+        }
+
+        section("specified ranges") {
+            paragraph "You can limit number and decimal inputs to a specific range."
+            input(range: "50..150", type: "decimal", name: "decimalRange50..150", title: "only values between 50 and 150 will pass validation", description: "no special formatting", required: false)
+            paragraph "Negative limits will add a negative symbol to the keyboard."
+            input(range: "-50..50", type: "number", name: "numberRange-50..50", title: "only values between -50 and 50 will pass validation", description: "no special formatting", required: false)
+            paragraph "Specify * to not limit one side or the other."
+            input(range: "*..0", type: "decimal", name: "decimalRange*..0", title: "only negative values will pass validation", description: "no special formatting", required: false)
+            input(range: "*..*", type: "number", name: "numberRange*..*", title: "only positive values will pass validation", description: "no special formatting", required: false)
+            paragraph "If you don't specify a range, it defaults to 0..*"
+        }
+    }
+}
+def inputTimePage() {
+    dynamicPage(name: "inputTimePage") {
+        section {
+            input(type: "time", name: "timeWithDescription", title: "a time picker", description: "with a description", required: false)
+            input(type: "time", name: "timeWithoutDescription", title: "without a description", description: null, required: false)
+            input(type: "time", name: "timeRequired", title: "required: true", required: true)
+        }
+    }
+}
+
+/// selection subsets
+def inputDevicePage() {
+
+    dynamicPage(name: "inputDevicePage") {
+
+        section("required: true") {
+            input(type: "device.switch", name: "deviceRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "device.switch", name: "deviceMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "device.switch", name: "deviceRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputCapabilityPage() {
+
+    dynamicPage(name: "inputCapabilityPage") {
+
+        section("required: true") {
+            input(type: "capability.switch", name: "capabilityRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "capability.switch", name: "capabilityMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "capability.switch", name: "capabilityRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputRoomPage() {
+
+    dynamicPage(name: "inputRoomPage") {
+
+        section("required: true") {
+            input(type: "room", name: "roomRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "room", name: "roomMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "room", name: "roomRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputModePage() {
+
+    dynamicPage(name: "inputModePage") {
+
+        section("required: true") {
+            input(type: "mode", name: "modeRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "mode", name: "modeMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "mode", name: "modeRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputHubPage() {
+
+    dynamicPage(name: "inputHubPage") {
+
+        section("required: true") {
+            input(type: "hub", name: "hubRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "hub", name: "hubMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "hub", name: "hubRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
+}
+def inputContactBookPage() {
+
+    dynamicPage(name: "inputContactBookPage") {
+
+        section("required: true") {
+            input(type: "contact", name: "contactRequired", title: "This is required", description: "It should look different when nothing is selected")
+        }
+
+        section("multiple: true") {
+            input(type: "contact", name: "contactMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
+        }
+
+        section("with image") {
+            input(type: "contact", name: "contactRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def appPage() {
-	dynamicPage(name: "appPage", title: "Every 'app' type") {
-		section {
-			paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
-		}
-		section("app") {
-			app(
-				name: "app",
-				title: "required:false, multiple:false",
-				required: false,
-				multiple: false,
-				namespace: "Steve",
-				appName: "Child SmartApp"
-			)
-			app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
-			app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
-			app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-		}
-		section("multiple:true") {
-			app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
-		}
-		section("multiple:true with image") {
-			app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-		}
-	}
+    dynamicPage(name: "appPage", title: "Every 'app' type") {
+        section {
+            paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
+        }
+        section("app") {
+            app(
+                    name: "app",
+                    title: "required:false, multiple:false",
+                    required: false,
+                    multiple: false,
+                    namespace: "Steve",
+                    appName: "Child SmartApp"
+            )
+            app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
+            app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
+            app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+        }
+        section("multiple:true") {
+            app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
+        }
+        section("multiple:true with image") {
+            app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+        }
+    }
 }
 
 def labelPage() {
-	dynamicPage(name: "labelPage", title: "Every 'Label' type") {
-		section("label") {
-			label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
-			label(name: "labelRequired", title: "required:true", required: true, multiple: false)
-			label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "labelPage", title: "Every 'Label' type") {
+        section("label") {
+            paragraph "The difference between a label element and a text input element is that the label element will effect the SmartApp directly by setting the label. An input element will place the set value in the SmartApp's settings."
+            paragraph "There are 3 here as an example. Never use more than 1 label element on a page."
+            label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
+            label(name: "labelRequired", title: "required:true", required: true, multiple: false)
+            label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def modePage() {
-	dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
-		section("mode") {
-			mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
-			mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
-			mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
-			mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
+        section("mode") {
+            paragraph "The difference between a mode element and a mode input element is that the mode element will effect the SmartApp directly by setting the modes it executes in. A mode input element will place the set value in the SmartApp's settings."
+            paragraph "Another difference is that you can select 'All Modes' when choosing which mode the SmartApp should execute in. This is the same as selecting no modes. When a SmartApp does not have modes specified, it will execute in all modes."
+            paragraph "There are 4 here as an example. Never use more than 1 mode element on a page."
+            mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
+            mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
+            mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
+            mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+        }
+    }
 }
 
 def paragraphPage() {
-	dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
-		section("paragraph") {
-			paragraph "This us how you should make a paragraph element"
-			paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
-		}
-	}
-}
-
-def iconPage() {
-	dynamicPage(name: "iconPage", title: "Every 'icon' type") { // TODO: finish this
-		section("icon") {
-			icon(name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
-			icon(name: "iconRequired", title: "required:true", required: true, multiple: false)
-			icon(name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
+        section("paragraph") {
+            paragraph "This is how you should make a paragraph element"
+            paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
+        }
+    }
 }
 
 def hrefPage() {
-	dynamicPage(name: "hrefPage", title: "Every 'href' type") {
-		section("page") {
-			href(name: "hrefPage", title: "required:false, multiple:false", required: false, multiple: false, page: "deadEnd")
-			href(name: "hrefPageRequired", title: "required:true", required: true, multiple: false, page: "deadEnd", description: "Don't make hrefs required")
-			href(name: "hrefPageComplete", title: "state:complete", required: false, multiple: false, page: "deadEnd", state: "complete")
-			href(name: "hrefPageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", page: "deadEnd",)
-		}
-		section("external") {
-			href(name: "hrefExternal", title: "required:false, multiple:false", required: false, multiple: false, style: "external", url: "http://smartthings.com/")
-			href(name: "hrefExternalRequired", title: "required:true", required: true, multiple: false, style: "external", url: "http://smartthings.com/", description: "Don't make hrefs required")
-			href(name: "hrefExternalComplete", title: "state:complete", required: false, multiple: true, style: "external", url: "http://smartthings.com/", state: "complete")
-			href(name: "hrefExternalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
-		}
-		section("embedded") {
-			href(name: "hrefEmbedded", title: "required:false, multiple:false", required: false, multiple: false, style: "embedded", url: "http://smartthings.com/")
-			href(name: "hrefEmbeddedRequired", title: "required:true", required: true, multiple: false, style: "embedded", url: "http://smartthings.com/", description: "Don't make hrefs required")
-			href(name: "hrefEmbeddedComplete", title: "state:complete", required: false, multiple: true, style: "embedded", url: "http://smartthings.com/", state: "complete")
-			href(name: "hrefEmbeddedWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
-		}
-	}
+    dynamicPage(name: "hrefPage", title: "Every 'href' variation") {
+        section("stylistic differences") {
+            href(page: "deadEnd", title: "state: 'complete'", description: "gives the appearance of an input that has been filled out", state: "complete")
+            href(page: "deadEnd", title: "with image", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+            href(page: "deadEnd", title: "with image and description", description: "and state: 'complete'", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", state: "complete")
+        }
+        section("functional differences") {
+            href(page: "deadEnd", title: "to a page within the app")
+            href(url: "http://www.google.com", title: "to a url using all defaults")
+            href(url: "http://www.google.com", title: "external: true", description: "takes you outside the app", external: true)
+        }
+    }
 }
 
 def buttonsPage() {
-	dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
-		section("buttons") {
-			buttons(name: "buttons", title: "required:false, multiple:false", required: false, multiple: false, buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-			buttons(name: "buttonsRequired", title: "required:true", required: true, multiple: false, buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-			buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
-				[label: "foo", action: "foo"],
-				[label: "bar", action: "bar"]
-			])
-		}
-		section("Colored Buttons") {
-			buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
-				[label: "complete", action: "bar", backgroundColor: "complete"],
-				[label: "required", action: "bar", backgroundColor: "required"]
-			])
-			buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
-				[label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
-				[label: "fg: #ffac00", action: "foo", color: "#ffac00"],
-				[label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
-			])
-			buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
-				[label: "green", action: "foo", backgroundColor: "green"],
-				[label: "red", action: "foo", backgroundColor: "red"],
-				[label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
-			])
-		}
-	}
+    dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
+        section("Simple Buttons") {
+            paragraph "If there are an odd number of buttons, the last button will span the entire view area."
+            buttons(name: "buttons1", title: "1 button", buttons: [
+                    [label: "foo", action: "foo"]
+            ])
+            buttons(name: "buttons2", title: "2 buttons", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"]
+            ])
+            buttons(name: "buttons3", title: "3 buttons", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"],
+                    [label: "baz", action: "baz"]
+            ])
+            buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
+                    [label: "foo", action: "foo"],
+                    [label: "bar", action: "bar"]
+            ])
+        }
+        section("Colored Buttons") {
+            buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
+                    [label: "complete", action: "bar", backgroundColor: "complete"],
+                    [label: "required", action: "bar", backgroundColor: "required"]
+            ])
+            buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
+                    [label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
+                    [label: "fg: #ffac00", action: "foo", color: "#ffac00"],
+                    [label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
+            ])
+            buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
+                    [label: "green", action: "foo", backgroundColor: "green"],
+                    [label: "red", action: "foo", backgroundColor: "red"],
+                    [label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
+            ])
+        }
+    }
 
 }
 
 def imagePage() {
-	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
-		section("image") {
-			image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
-			image(name: "imageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-		}
-	}
+    dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
+        section("image") {
+            image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
+            image(name: "imageWithMultipleImages", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, images: ["https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"])
+        }
+    }
 }
 
 def videoPage() {
-	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish this
-		section("video") {
-			// TODO: update this when there is a videoElement method
-			element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c26321.jpg", video: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c2631f.mp4")
-		}
-	}
+    dynamicPage(name: "videoPage", title: "Every 'video' type") { // TODO: finish this
+        section("video") {
+            // TODO: update this when there is a videoElement method
+            element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://f.cl.ly/items/0w0D1p0K2D0d190F3H3N/Image%202015-12-14%20at%207.57.27%20AM.jpg", video: "http://f.cl.ly/items/3O2L03471l2K3E3l3K1r/Zombie%20Kid%20Likes%20Turtles.mp4")
+        }
+    }
 }
 
 def flattenedPage() {
-	def allSections = []
-	firstPage().sections.each { section ->
-		section.body.each { hrefElement ->
-			if (hrefElement.page != "flattenedPage") {
-				allSections += "${hrefElement.page}"().sections
-			}
-		}
-	}
-	def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
-	flattenedPage.sections = allSections
-	return flattenedPage
+    def allSections = []
+    firstPage().sections[0].body.each { hrefElement ->
+        if (hrefElement.name != "inputPage") {
+            // inputPage is a bunch of hrefs
+            allSections += "${hrefElement.page}"().sections
+        }
+    }
+    // collect the input elements
+    inputPage().sections.each { section ->
+        section.body.each { hrefElement ->
+            allSections += "${hrefElement.page}"().sections
+        }
+    }
+    def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
+    flattenedPage.sections = allSections
+    return flattenedPage
 }
 
 def foo() {
-	dynamicPage(name: "deadEnd") {
-
-	}
+    dynamicPage(name: "deadEnd") {
+        section {  }
+    }
 }
 
 def installed() {
-	log.debug "Installed with settings: ${settings}"
+    log.debug "Installed with settings: ${settings}"
 
-	initialize()
+    initialize()
 }
 
 def updated() {
-	log.debug "Updated with settings: ${settings}"
+    log.debug "Updated with settings: ${settings}"
 
-	unsubscribe()
-	initialize()
+    unsubscribe()
+    initialize()
 }
 
 def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
+    // TODO: subscribe to attributes, devices, locations, etc.
 }

smartapps/smartthings/foscam-connect.src/foscam-connect.groovy

@@ -23,7 +23,8 @@ definition(
     description: "Connect and take pictures using your Foscam camera from inside the Smartthings app.",
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -23,7 +23,8 @@ definition(
 	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png"
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
+    singleInstance: true
 )
 
 preferences {
@@ -143,7 +144,7 @@ def bulbDiscovery() {
     if (numFound == 0)
     	app.updateSetting("selectedBulbs", "") 
         
-	if((bulbRefreshCount % 3) == 0) {
+	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
 
@@ -318,11 +319,15 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-				if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light")) {
-					d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-				} else {
-					d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-				}
+                if (newHueBulb != null) {
+                    if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") ) {
+                        d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    } else {
+                        d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+                    }
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
 			} else { 
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
@@ -604,23 +609,22 @@ def parse(childDevice, description) {
 	}
 }
 
-def on(childDevice, transition_deprecated = 0) {
+def on(childDevice) {
 	log.debug "Executing 'on'"
-    def percent = childDevice.device?.currentValue("level") as Integer
-	def level = Math.min(Math.round(percent * 255 / 100), 255)
-	put("lights/${getId(childDevice)}/state", [bri: level, on: true])
-    return "level: $percent"
+	put("lights/${getId(childDevice)}/state", [on: true])
+    return "Bulb is On"
 }
 
-def off(childDevice, transition_deprecated = 0) {
+def off(childDevice) {
 	log.debug "Executing 'off'"
 	put("lights/${getId(childDevice)}/state", [on: false])
-    return "level: 0"
+    return "Bulb is Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-	def level = Math.min(Math.round(percent * 255 / 100), 255)
+    def level 
+    if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
 
@@ -636,7 +640,7 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColor(childDevice, huesettings, alert_deprecated = "", transition_deprecated = 0) {
+def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
@@ -645,7 +649,7 @@ def setColor(childDevice, huesettings, alert_deprecated = "", transition_depreca
 
 	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
 	if (huesettings.level != null) {
-		value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
+        if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
 		value.on = value.bri > 0
 	}
 
@@ -723,8 +727,6 @@ private getBridgeIP() {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
             if (!bridge) { 
-            	//failed because mac address sent from hub is wrong and doesn't match the hue's real mac address and serial number
-                //in this case we will look up the bridge by comparing the incorrect mac addresses
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -98,6 +98,15 @@ def installed() {
 }
 
 def updated() {
+	def currentDeviceIds = settings.collect { k, devices -> devices }.flatten().collect { it.id }.unique()
+	def subscriptionDevicesToRemove = app.subscriptions*.device.findAll { device ->
+		!currentDeviceIds.contains(device.id)
+	}
+	subscriptionDevicesToRemove.each { device ->
+		log.debug "Removing $device.displayName subscription"
+		state.remove(device.id)
+		unsubscribe(device)
+	}
 	log.debug settings
 }
 

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -22,7 +22,8 @@ definition(
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/life360.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/life360@2x.png",
-    oauth: [displayName: "Life360", displayLink: "Life360"]
+    oauth: [displayName: "Life360", displayLink: "Life360"],
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
@@ -591,7 +592,7 @@ def updated() {
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device
-       		def childDevice = addChildDevice("smartthings", "life360-user", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
+       		def childDevice = addChildDevice("smartthings", "Life360 User", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
             // childDevice.setMemberId(member.id)
         
         	if (childDevice)

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -5,22 +5,23 @@
  *
  */
 definition(
-	name: "LIFX (Connect)",
-	namespace: "smartthings",
-	author: "LIFX",
-	description: "Allows you to use LIFX smart light bulbs with SmartThings.",
-	category: "Convenience",
-	iconUrl: "https://cloud.lifx.com/images/lifx.png",
-	iconX2Url: "https://cloud.lifx.com/images/lifx.png",
-	iconX3Url: "https://cloud.lifx.com/images/lifx.png",
-	oauth: true) {
-		appSetting "clientId"
-		appSetting "clientSecret"
-	}
+		name: "LIFX (Connect)",
+		namespace: "smartthings",
+		author: "LIFX",
+		description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+		category: "Convenience",
+		iconUrl: "https://cloud.lifx.com/images/lifx.png",
+		iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+		iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+		oauth: true,
+		singleInstance: true) {
+	appSetting "clientId"
+	appSetting "clientSecret"
+}
 
 
 preferences {
-	page(name: "Credentials", title: "LIFX", content: "authPage", install: false)
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: true)
 }
 
 mappings {
@@ -32,29 +33,29 @@ mappings {
 	path("/test") { action: [ GET: "oauthSuccess" ] }
 }
 
-def getServerUrl() { return "https://graph.api.smartthings.com" }
-def apiURL(path = '/') { return "https://api.lifx.com/v1beta1${path}" }
-def buildRedirectUrl(page) {
-	return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
-}
+def getServerUrl()               { return "https://graph.api.smartthings.com" }
+def getCallbackUrl()             { return "https://graph.api.smartthings.com/oauth/callback"}
+def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
+def getSecretKey()               { return appSettings.secretKey }
+def getClientId()                { return appSettings.clientId }
 
 def authPage() {
-	log.debug "authPage"
+	log.debug "authPage test1"
 	if (!state.lifxAccessToken) {
 		log.debug "no LIFX access token"
 		// This is the SmartThings access token
 		if (!state.accessToken) {
 			log.debug "no access token, create access token"
-			createAccessToken() // predefined method
+			state.accessToken = createAccessToken() // predefined method
 		}
 		def description = "Tap to enter LIFX credentials"
-		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}" // this triggers oauthInit() below
-		log.debug "app id: ${app.id}"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
+//        def redirectUrl = "${apiServerUrl}"
+        log.debug "app id: ${app.id}"
 		log.debug "redirect url: ${redirectUrl}"
-		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:false) {
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
-				// href(url:buildRedirectUrl("test"), title: "Message test")
 			}
 		}
 	} else {
@@ -62,17 +63,15 @@ def authPage() {
 
 		def options = locationOptions() ?: []
 		def count = options.size()
-        def refreshInterval = 3
 
-		return dynamicPage(name:"Credentials", title:"Select devices...", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
+		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {
-				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options, submitOnChange: true
 			}
 		}
 	}
 }
 
-
 // OAuth
 
 def oauthInit() {
@@ -111,7 +110,7 @@ def oauthCallback() {
 }
 
 def oauthReceiveToken(redirectUrl = null) {
-
+	// Not sure what redirectUrl is for
 	log.debug "receiveToken - params: ${params}"
 	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
 	def params = [
@@ -134,25 +133,25 @@ def oauthReceiveToken(redirectUrl = null) {
 
 def oauthSuccess() {
 	def message = """
-        <p>Your LIFX Account is now connected to SmartThings!</p>
-        <p>Click 'Done' to finish setup.</p>
-    """
+		<p>Your LIFX Account is now connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
 def oauthFailure() {
 	def message = """
-        <p>The connection could not be established!</p>
-        <p>Click 'Done' to return to the menu.</p>
-    """
+		<p>The connection could not be established!</p>
+		<p>Click 'Done' to return to the menu.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
 def oauthReceivedToken() {
 	def message = """
-        <p>Your LIFX Account is already connected to SmartThings!</p>
-        <p>Click 'Done' to finish setup.</p>
-    """
+		<p>Your LIFX Account is already connected to SmartThings!</p>
+		<p>Click 'Done' to finish setup.</p>
+	"""
 	oauthConnectionStatus(message)
 }
 
@@ -160,74 +159,74 @@ def oauthConnectionStatus(message, redirectUrl = null) {
 	def redirectHtml = ""
 	if (redirectUrl) {
 		redirectHtml = """
-            <meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-        """
+			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+		"""
 	}
 
 	def html = """
-        <!DOCTYPE html>
-        <html>
-        <head>
-        <meta name="viewport" content="width=device-width">
-        <title>SmartThings Connection</title>
-        <style type="text/css">
-            @font-face {
-                font-family: 'Swiss 721 W01 Thin';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            @font-face {
-                font-family: 'Swiss 721 W01 Light';
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-                font-weight: normal;
-                font-style: normal;
-            }
-            .container {
-                width: 280;
-                padding: 20px;
-                text-align: center;
-            }
-            img {
-                vertical-align: middle;
-            }
-            img:nth-child(2) {
-                margin: 0 15px;
-            }
-            p {
-                font-size: 1.2em;
-                font-family: 'Swiss 721 W01 Thin';
-                text-align: center;
-                color: #666666;
-                padding: 0 20px;
-                margin-bottom: 0;
-            }
-            span {
-                font-family: 'Swiss 721 W01 Light';
-            }
-        </style>
-        ${redirectHtml}
-        </head>
-        <body>
-            <div class="container">
-                <img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
-                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
-                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
-                <p>
-                    ${message}
-                </p>
-            </div>
-        </body>
-        </html>
-    """
+		<!DOCTYPE html>
+		<html>
+		<head>
+		<meta name="viewport" content="width=device-width">
+		<title>SmartThings Connection</title>
+		<style type="text/css">
+			@font-face {
+				font-family: 'Swiss 721 W01 Thin';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			@font-face {
+				font-family: 'Swiss 721 W01 Light';
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+				font-weight: normal;
+				font-style: normal;
+			}
+			.container {
+				width: 280;
+				padding: 20px;
+				text-align: center;
+			}
+			img {
+				vertical-align: middle;
+			}
+			img:nth-child(2) {
+				margin: 0 15px;
+			}
+			p {
+				font-size: 1.2em;
+				font-family: 'Swiss 721 W01 Thin';
+				text-align: center;
+				color: #666666;
+				padding: 0 20px;
+				margin-bottom: 0;
+			}
+			span {
+				font-family: 'Swiss 721 W01 Light';
+			}
+		</style>
+		${redirectHtml}
+		</head>
+		<body>
+			<div class="container">
+				<img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+				<p>
+					${message}
+				</p>
+			</div>
+		</body>
+		</html>
+	"""
 	render contentType: 'text/html', data: html
 }
 
@@ -238,7 +237,6 @@ String toQueryString(Map m) {
 // App lifecycle hooks
 
 def installed() {
-	enableCallback() // wtf does this do?
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -250,7 +248,6 @@ def installed() {
 
 // called after settings are changed
 def updated() {
-	enableCallback() // not sure what this does
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -304,27 +301,36 @@ def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
 			state.remove("lifxAccessToken")
 			options.logObject.warn "Access token is not valid"
 		}
-		return options.errerReturn
+		return options.errorReturn
 	} catch (java.net.SocketTimeoutException e) {
 		options.logObject.warn "Connection timed out, not much we can do here"
-		return options.errerReturn
+		return options.errorReturn
 	}
 }
 
 def apiGET(path) {
-	httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
-		logResponse(response)
-		return response
+	try {
+		httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
 	}
 }
 
 def apiPUT(path, body = [:]) {
-	log.debug("Beginning API PUT: ${path}, ${body}")
-	httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
-		logResponse(response)
-		return response
-	}
-}
+	try {
+		log.debug("Beginning API PUT: ${path}, ${body}")
+		httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+			logResponse(response)
+			return response
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		logResponse(e.response)
+		return e.response
+	}}
 
 def devicesList(selector = '') {
 	logErrors([]) {
@@ -339,12 +345,12 @@ def devicesList(selector = '') {
 }
 
 Map locationOptions() {
-
 	def options = [:]
 	def devices = devicesList()
 	devices.each { device ->
 		options[device.location.id] = device.location.name
 	}
+	log.debug("Locations: ${options}")
 	return options
 }
 
@@ -358,28 +364,32 @@ def updateDevices() {
 		state.devices = [:]
 	}
 	def devices = devicesInLocation()
-	def deviceIds = devices*.id
+	def selectors = []
+
+	log.debug("All selectors: ${selectors}")
+
 	devices.each { device ->
 		def childDevice = getChildDevice(device.id)
+		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.capabilities}")
+			log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
-					level: sprintf("%f", (device.brightness ?: 1) * 100),
+					level: Math.round((device.brightness ?: 1) * 100),
 					switch: device.connected ? device.power : "unreachable",
 					colorTemperature: device.color.kelvin
 			]
-			if (device.capabilities.has_color) {
+			if (device.product.capabilities.has_color) {
 				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
 				data["hue"] = device.color.hue / 3.6
 				data["saturation"] = device.color.saturation * 100
-				childDevice = addChildDevice("smartthings", "LIFX Color Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
 			} else {
-				childDevice = addChildDevice("smartthings", "LIFX White Bulb", device.id, null, data)
+				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
 			}
 		}
 	}
-	getChildDevices().findAll { !deviceIds.contains(it.deviceNetworkId) }.each {
+	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
 		deleteChildDevice(it.deviceNetworkId)
 	}
@@ -391,4 +401,4 @@ def refreshDevices() {
 	getChildDevices().each { device ->
 		device.refresh()
 	}
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,7 +34,7 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
- 
+
 definition(
     name: "Logitech Harmony (Connect)",
     namespace: "smartthings",
@@ -43,11 +43,11 @@ definition(
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony%402x.png",
-    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"]    
+    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"],
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "callbackUrl"
 }
 
 preferences(oauthPage: "deviceAuthorization") {
@@ -89,16 +89,18 @@ mappings {
 }
 
 def getServerUrl() { return "https://graph.api.smartthings.com" }
+def getCallbackUrl() { "https://graph.api.smartthings.com/oauth/callback" }
+def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
 
 def authPage() {
-    def description = null          
+    def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
 			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
-        def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}"
+        def redirectUrl = buildRedirectUrl
         return dynamicPage(name: "Credentials", title: "Harmony", nextPage: null, uninstall: true, install:false) {
                section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
         }
@@ -110,7 +112,7 @@ def authPage() {
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
-        
+
 		def numFoundHub = huboptions.size() ?: 0
         def numFoundAct = actoptions.size() ?: 0
 		if((deviceRefreshCount % 5) == 0) {
@@ -120,13 +122,14 @@ def authPage() {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-            if (numFoundHub > 0 && numFoundAct > 0 && false)
+            // Virtual activity flag
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
 				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
-			}     
+			}
             if (state.resethub)
-			section("Connection to the hub timed out. Please restart the hub and try again.") {}     
-		}                       
+			section("Connection to the hub timed out. Please restart the hub and try again.") {}
+		}
     }
 }
 
@@ -138,7 +141,7 @@ def callback() {
 	} else {
 		log.warn "No authQueryString"
 	}
-	
+
 	if (state.HarmonyAccessToken) {
 		log.debug "Access token already exists"
 		discovery()
@@ -163,8 +166,8 @@ def callback() {
 
 def init() {
 	log.debug "Requesting Code"
-    def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${appSettings.callbackUrl}" ]
-    redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
+	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${callbackUrl}" ]
+	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
@@ -174,7 +177,7 @@ def receiveToken(redirectUrl = null) {
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
     ]
 	try {
-        httpPost(params) { response -> 
+        httpPost(params) { response ->
             state.HarmonyAccessToken = response.data.access_token
         }
 	} catch (java.util.concurrent.TimeoutException e) {
@@ -221,7 +224,7 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
-	
+
     def html = """
         <!DOCTYPE html>
         <html>
@@ -302,30 +305,28 @@ def buildRedirectUrl(page) {
 }
 
 def installed() {
-	enableCallback()	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {	
+	} else {
 		initialize()
 	}
 }
 
 def updated() {
 	unsubscribe()
-    unschedule()
-	enableCallback()	
+  unschedule()
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {	
+	} else {
 		initialize()
-	}   
+	}
 }
 
 def uninstalled() {
 	if (state.HarmonyAccessToken) {
-		try {	
+		try {
         	state.HarmonyAccessToken = ""
         	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
@@ -339,7 +340,7 @@ def initialize() {
 	if (selectedhubs || selectedactivities) {
 		addDevice()
         runEvery5Minutes("discovery")
-	}	
+	}
 }
 
 def getHarmonydevices() {
@@ -359,20 +360,20 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each { 
+        	it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
-           }            
+           }
         }
         state.HarmonyHubs = hubs
-        state.HarmonyActivities = activities              
-    }    
+        state.HarmonyActivities = activities
+    }
 }
 
 //CHILD DEVICE METHODS
 def discovery() {
-    def Params = [auth: state.HarmonyAccessToken]	    
+    def Params = [auth: state.HarmonyAccessToken]
     def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
@@ -384,11 +385,11 @@ def discovery() {
                 poll()
 	        } else {
             	log.debug "Error: $response.status"
-            }    
+            }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
-            state.remove("HarmonyAccessToken")        
+            state.remove("HarmonyAccessToken")
             log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
@@ -396,12 +397,12 @@ def discovery() {
         state.resethub = true
  	} catch (e) {
 		log.warn "Hostname in certificate didn't match. Please try again later."
-	}	          
+	}
     return null
 }
 
 def addDevice() {
-    log.trace "Adding Hubs" 
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -412,8 +413,8 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }  
-    log.trace "Adding Activities" 
+    }
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -424,7 +425,7 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }    
+    }
 }
 
 def activity(dni,mode) {
@@ -432,26 +433,26 @@ def activity(dni,mode) {
     def msg = "Command failed"
     def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"  
-    } else {    
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
+    } else {
         def aux = dni.split('-')
         def hubId = aux[1]
-        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){	
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}" 
+        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
             def activityId = aux[2]
         	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
-	}     
+	}
 	try {
-    	httpPostJson(uri: url) { response -> 
+    	httpPostJson(uri: url) { response ->
         	if (response.data.code == 200 || dni == "all") {
             	msg = "Command sent succesfully"
-            	state.aux = 0 
+            	state.aux = 0
             } else {
             	msg = "Command failed. Error: $response.data.code"
             }
-		} 
+		}
     } catch (groovyx.net.http.HttpResponseException ex) {
         log.error ex
         if (state.aux == 0) {
@@ -459,7 +460,7 @@ def activity(dni,mode) {
         	activity(dni,mode)
         } else {
         	msg = ex
-            state.aux = 0 
+            state.aux = 0
         }
     } catch(Exception ex) {
     	msg = ex
@@ -472,10 +473,10 @@ def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 def map = [:]
                 response.data.hubs.each {
 		            if (it.value.message == "OK") {
@@ -488,20 +489,20 @@ def poll() {
 	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
 	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
 	                        }
-	                    }   
+	                    }
 	                } else {
 		                log.trace it.value.message
-	                }   
+	                }
                 }
-                def activities = getChildDevices() 
+                def activities = getChildDevices()
                 def activitynotrunning = true
                 activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-') 
+                    def act = activity.deviceNetworkId.split('-')
                     if (act.size() > 2) {
                         def aux = map.find { it.key == act[1] }
                         if (aux) {
                             def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)                   
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
                             if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
                                 childDevice?.sendEvent(name: "switch", value: "on")
                                 if (aux2[1] == "1")
@@ -511,30 +512,30 @@ def poll() {
                                 if (aux2[1] == "3")
                                     runIn(5, "poll", [overwrite: true])
                             }
-                        } 
-                    }    
+                        }
+                    }
                 }
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
             if (e.statusCode == 401) { // token is expired
-                state.remove("HarmonyAccessToken")        
+                state.remove("HarmonyAccessToken")
                 return "Harmony Access token has expired"
-            }    
+            }
 		} catch(Exception e) {
         	log.trace e
 		}
-	}        
+	}
 }
 
 
 def getActivityList() {
 	// GET ACTIVITY'S NAME
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 response.data.hubs.each {
                     def hub = getChildDevice("harmony-${it.key}")
                     if (hub) {
@@ -547,10 +548,10 @@ def getActivityList() {
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
                             log.trace activities
-                        }    
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)   		
+                        }
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
 					}
-                }    
+                }
             }
         } catch (groovyx.net.http.HttpResponseException e) {
         	log.trace e
@@ -559,7 +560,7 @@ def getActivityList() {
 		} catch(Exception e) {
         	log.trace e
 		}
-    }    
+    }
 	return activity
 }
 
@@ -567,16 +568,16 @@ def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 actname = response.data.data.activities[activity].name
             }
 		} catch(Exception e) {
         	log.trace e
 		}
-    }    
+    }
 	return actname
 }
 
@@ -584,19 +585,19 @@ def getActivityId(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actid = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
             	response.data.data.activities.each {
                 	if (it.value.name == activity)
                 		actid = it.key
-                }   
+                }
             }
 		} catch(Exception e) {
         	log.trace e
 		}
-    }    
+    }
 	return actid
 }
 
@@ -604,16 +605,16 @@ def getHubName(hubId) {
 	// GET HUB'S NAME
     def hubname = hubId
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]	    
+        def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/discover?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
                 hubname = response.data.data.name
             }
 		} catch(Exception e) {
         	log.trace e
-		}     
-    }    
+		}
+    }
 	return hubname
 }
 
@@ -624,8 +625,8 @@ def sendNotification(msg) {
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
     log.debug "request = ${request}"
-    
-    def json = request.JSON 
+
+    def json = request.JSON
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
@@ -659,12 +660,16 @@ def updateDevice() {
 	} else {
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			if (arguments) {
-				device."$command"(*arguments)
-			} else {
-				device."$command"()
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
 			}
-			render status: 204, data: "{}"
 		} else {
 			render status: 404, data: '{"msg": "Device not found"}'
 		}

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -49,6 +49,7 @@ preferences {
 	section("Via a push notification and/or an SMS message"){
         input("recipients", "contact", title: "Send notifications to") {
             input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+            paragraph "If outside the US please make sure to enter the proper country code"
             input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
         }
 	}

smartapps/smartthings/samsung-tv-connect.src/samsung-tv-connect.groovy

@@ -22,7 +22,8 @@ definition(
 	description: "Allows you to control your Samsung TV from the SmartThings app. Perform basic functions like power Off, source, volume, channels and other remote control functions.",
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/send-ham-bridge-command-when.src/send-ham-bridge-command-when.groovy

@@ -16,8 +16,8 @@
  *
  */
 definition(
-    name: "Send HAM Bridge Command When…",
-    namespace: "soletc.com",
+    name: "Send HAM Bridge Command When",
+    namespace: "smartthings",
     author: "Scottin Pollock",
     description: "Sends a command to your HAM Bridge server when SmartThings are activated.",
     category: "Convenience",
@@ -25,7 +25,6 @@ definition(
     iconX2Url: "http://solutionsetcetera.com/stuff/STIcons/HB@2x.png"
 )
 
-
 preferences {
 	section("Choose one or more, when..."){
 		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true

smartapps/smartthings/speaker-control.src/speaker-control.groovy

@@ -10,24 +10,24 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Control
+ *  Speaker Control
  *
  *  Author: SmartThings
  *
  *  Date: 2013-12-10
  */
 definition(
-    name: "Sonos Control",
+    name: "Speaker Control",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play or pause your Sonos when certain actions take place in your home.",
+    description: "Play or pause your Speaker when certain actions take place in your home.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Control your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
 			input "starting", "time", title: "Starting", required: false
@@ -81,7 +81,7 @@ def mainPage() {
 			]
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "Sonos music player", required: true
+			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false

smartapps/smartthings/speaker-mood-music.src/speaker-mood-music.groovy

@@ -10,7 +10,7 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Mood Music
+ *  Speaker Mood Music
  *
  *  Author: SmartThings
  *  Date: 2014-02-12
@@ -65,7 +65,7 @@ private saveSelectedSong() {
 }
 
 definition(
-    name: "Sonos Mood Music",
+    name: "Speaker Mood Music",
     namespace: "smartthings",
     author: "SmartThings",
     description: "Plays a selected song or station.",
@@ -75,7 +75,7 @@ definition(
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a selected song or station on your Sonos when something happens", nextPage: "chooseTrack", uninstall: true)
+	page(name: "mainPage", title: "Play a selected song or station on your Speaker when something happens", nextPage: "chooseTrack", uninstall: true)
 	page(name: "chooseTrack", title: "Select a song", install: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -125,7 +125,7 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume", description: "0-100%", required: false

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Custom Message
+ *  Speaker Custom Message
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-	name: "Sonos Notify with Sound",
+	name: "Speaker Notify with Sound",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Play a sound or custom message through your Sonos when the mode changes or other events occur.",
+	description: "Play a sound or custom message through your Speaker when the mode changes or other events occur.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a message on your Sonos when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play a message on your Speaker when something happens", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -75,8 +75,8 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section{
-			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Custom Message", options: [
-				"Custom Message",
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
+				//"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,10 +89,10 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			input "message","text",title:"Play this message", required:false, multiple: false
+			//input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after notification", required: false, defaultValue: true
@@ -409,12 +409,13 @@ private loadText() {
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
 		default:
-			if (message) {
+			/*if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}
+			}*/
+			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}
 }

smartapps/smartthings/speaker-weather-forecast.src/speaker-weather-forecast.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Sonos Weather Forecast
+ *  Speaker Weather Forecast
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-    name: "Sonos Weather Forecast",
+    name: "Speaker Weather Forecast",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play a weather report through your Sonos when the mode changes or other events occur",
+    description: "Play a weather report through your Speaker when the mode changes or other events occur",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play the weather report on your sonos", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play the weather report on your speaker", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -85,7 +85,7 @@ def mainPage() {
 			)
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after weather report finishes", required: false, defaultValue: true

smartapps/smartthings/tesla-connect.src/tesla-connect.groovy

@@ -23,7 +23,8 @@ definition(
     description: "Integrate your Tesla car with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png",
+    singleInstance: true
 )
 
 preferences {

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -22,7 +22,8 @@ definition(
     description: "Allows you to integrate your WeMo Switch and Wemo Motion sensor with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png",
+    singleInstance: true
 )
 
 preferences {
@@ -61,10 +62,7 @@ def firstPage()
 
 		log.debug "REFRESH COUNT :: ${refreshCount}"
 
-		if(!state.subscribe) {
-			subscribe(location, null, locationHandler, [filterEvents:false])
-			state.subscribe = true
-		}
+		subscribe(location, null, locationHandler, [filterEvents:false])
 
 		//ssdp request every 25 seconds
 		if((refreshCount % 5) == 0) {
@@ -80,7 +78,7 @@ def firstPage()
 		def motionsDiscovered = motionsDiscovered()
 		def lightSwitchesDiscovered = lightSwitchesDiscovered()
 
-		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: selectedSwitches != null || selectedMotions != null || selectedLightSwitches != null) {
+		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
 			section("Select a device...") {
 				input "selectedSwitches", "enum", required:false, title:"Select Wemo Switches \n(${switchesDiscovered.size() ?: 0} found)", multiple:true, options:switchesDiscovered
 				input "selectedMotions", "enum", required:false, title:"Select Wemo Motions \n(${motionsDiscovered.size() ?: 0} found)", multiple:true, options:motionsDiscovered
@@ -168,21 +166,30 @@ def getWemoLightSwitches()
 def installed() {
 	log.debug "Installed with settings: ${settings}"
 	initialize()
-
-	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
-	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
-	runIn(900, "doDeviceSync" , [overwrite: false]) //setup ip:port syncing every 15 minutes
-
-	// SUBSCRIBE responses come back with TIMEOUT-1801 (30 minutes), so we refresh things a bit before they expire (29 minutes)
-	runIn(1740, "refresh", [overwrite: false])
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
 	initialize()
+}
 
-	runIn(5, "subscribeToDevices") //subscribe again to new/old devices wait 5 seconds
-	runIn(10, "refreshDevices") //refresh devices again, delayed by 10 seconds
+def initialize() {
+	unsubscribe()
+    unschedule()
+	subscribe(location, null, locationHandler, [filterEvents:false])
+
+	if (selectedSwitches)
+		addSwitches()
+
+	if (selectedMotions)
+		addMotions()
+
+	if (selectedLightSwitches)
+		addLightSwitches()
+
+	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
+	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
+    runEvery5Minutes("refresh")
 }
 
 def resubscribe() {
@@ -192,8 +199,7 @@ def resubscribe() {
 
 def refresh() {
 	log.debug "refresh() called"
-	//reschedule the refreshes
-	runIn(1740, "refresh", [overwrite: false])
+    doDeviceSync()
 	refreshDevices()
 }
 
@@ -236,7 +242,8 @@ def addSwitches() {
 							"port": selectedSwitch.value.port
 					]
 			])
-
+      def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -266,8 +273,9 @@ def addMotions() {
 					"port": selectedMotion.value.port
 				]
 			])
-
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+      def ipvalue = convertHexToIP(selectedMotion.value.ip)
+      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+      log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
 		}
@@ -296,7 +304,8 @@ def addLightSwitches() {
 					"port": selectedLightSwitch.value.port
 				]
 			])
-
+      def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 		   log.debug "found ${d.displayName} with id $dni already exists"
@@ -304,27 +313,6 @@ def addLightSwitches() {
 	}
 }
 
-def initialize() {
-	// remove location subscription afterwards
-	 unsubscribe()
-	 state.subscribe = false
-
-	if (selectedSwitches)
-	{
-		addSwitches()
-	}
-
-	if (selectedMotions)
-	{
-		addMotions()
-	}
-
-	if (selectedLightSwitches)
-	{
-		addLightSwitches()
-	}
-}
-
 def locationHandler(evt) {
 	def description = evt.description
 	def hub = evt?.hubId
@@ -333,53 +321,32 @@ def locationHandler(evt) {
     log.debug parsedEvent
 
 	if (parsedEvent?.ssdpTerm?.contains("Belkin:device:controllee") || parsedEvent?.ssdpTerm?.contains("Belkin:device:insight")) {
-
 		def switches = getWemoSwitches()
-
-		if (!(switches."${parsedEvent.ssdpUSN.toString()}"))
-		{ //if it doesn't already exist
+		if (!(switches."${parsedEvent.ssdpUSN.toString()}")) {
+        	//if it doesn't already exist
 			switches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else {
 			log.debug "Device was already found in state..."
-
 			def d = switches."${parsedEvent.ssdpUSN.toString()}"
 			boolean deviceChangedValues = false
-
+			log.debug "$d.ip <==> $parsedEvent.ip"
 			if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
 				d.ip = parsedEvent.ip
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
+                def child = getChildDevice(parsedEvent.mac)
+				child.subscribe(parsedEvent.ip, parsedEvent.port)
+                child.poll()
 			}
-
-			if (deviceChangedValues) {
-				def children = getChildDevices()
-				log.debug "Found children ${children}"
-				children.each {
-					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
-						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
-						it.subscribe(parsedEvent.ip, parsedEvent.port)
-					}
-				}
-			}
-
 		}
-
 	}
 	else if (parsedEvent?.ssdpTerm?.contains("Belkin:device:sensor")) {
-
 		def motions = getWemoMotions()
-
-		if (!(motions."${parsedEvent.ssdpUSN.toString()}"))
-		{ //if it doesn't already exist
+		if (!(motions."${parsedEvent.ssdpUSN.toString()}")) {
+        	//if it doesn't already exist
 			motions << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else { // just update the values
 			log.debug "Device was already found in state..."
 
 			def d = motions."${parsedEvent.ssdpUSN.toString()}"
@@ -412,10 +379,7 @@ def locationHandler(evt) {
 		if (!(lightSwitches."${parsedEvent.ssdpUSN.toString()}"))
 		{ //if it doesn't already exist
 			lightSwitches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		}
-		else
-		{ // just update the values
-
+		} else {
 			log.debug "Device was already found in state..."
 
 			def d = lightSwitches."${parsedEvent.ssdpUSN.toString()}"
@@ -426,21 +390,11 @@ def locationHandler(evt) {
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
+				def child = getChildDevice(parsedEvent.mac)
+				log.debug "updating ip and port, and resubscribing, for device with mac ${parsedEvent.mac}"
+				child.subscribe(parsedEvent.ip, parsedEvent.port)
 			}
-
-			if (deviceChangedValues) {
-				def children = getChildDevices()
-				log.debug "Found children ${children}"
-				children.each {
-					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
-						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
-						it.subscribe(parsedEvent.ip, parsedEvent.port)
-					}
-				}
-			}
-
 		}
-
 	}
 	else if (parsedEvent.headers && parsedEvent.body) {
 		String headerString = new String(parsedEvent.headers.decodeBase64())?.toLowerCase()
@@ -580,73 +534,30 @@ private def parseDiscoveryMessage(String description) {
 			}
 		}
 	}
-
 	device
 }
 
 def doDeviceSync(){
 	log.debug "Doing Device Sync!"
-	runIn(900, "doDeviceSync" , [overwrite: false]) //schedule to run again in 15 minutes
-
-	if(!state.subscribe) {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-		state.subscribe = true
-	}
-
 	discoverAllWemoTypes()
 }
 
-def pollChildren() {
-	def devices = getAllChildDevices()
-	devices.each { d ->
-		//only poll switches?
-		d.poll()
-	}
+private String convertHexToIP(hex) {
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
-def delayPoll() {
-	log.debug "Executing 'delayPoll'"
-
-	runIn(5, "pollChildren")
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
 }
 
-/*def poll() {
-	log.debug "Executing 'poll'"
-	runIn(600, "poll", [overwrite: false]) //schedule to run again in 10 minutes
-
-	def lastPoll = getLastPollTime()
-	def currentTime = now()
-	def lastPollDiff = currentTime - lastPoll
-	log.debug "lastPoll: $lastPoll, currentTime: $currentTime, lastPollDiff: $lastPollDiff"
-	setLastPollTime(currentTime)
-
-	doDeviceSync()
-}
-
-
-def setLastPollTime(currentTime) {
-	state.lastpoll = currentTime
-}
-
-def getLastPollTime() {
-	state.lastpoll ?: now()
-}
-
-def now() {
-	new Date().getTime()
-}*/
-
-private Boolean canInstallLabs()
-{
+private Boolean canInstallLabs() {
 	return hasAllHubsOver("000.011.00603")
 }
 
-private Boolean hasAllHubsOver(String desiredFirmware)
-{
+private Boolean hasAllHubsOver(String desiredFirmware) {
 	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
 }
 
-private List getRealHubFirmwareVersions()
-{
+private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }

smartapps/smartthings/withings.src/withings.groovy

@@ -24,7 +24,8 @@ definition(
     category: "Connections",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/withings.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/smartthings/yoics-connect.src/yoics-connect.groovy

@@ -24,7 +24,8 @@ definition(
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    oauth: true
+    oauth: true,
+    singleInstance: true
 ) {
   appSetting "serverUrl"
 }

smartapps/sprayercontroller/sprayer-controller-2.src/sprayer-controller-2.groovy

@@ -15,7 +15,7 @@
  */
 definition(
     name: "Sprayer Controller 2",
-    namespace: "",
+    namespace: "sprayercontroller",
     author: "Cooper Lee",
     description: "Control Sprayers for a period of time a number of times per hour",
     category: "My Apps",

smartapps/wackford/quirky-connect.src/quirky-connect.groovy

@@ -58,7 +58,8 @@ definition(
     description: "Connect your Quirky to SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png"
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png",
+    singleInstance: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/wackford/tcp-bulbs-connect.src/tcp-bulbs-connect.groovy

@@ -25,7 +25,8 @@ definition(
 	description: "Connect your TCP bulbs to SmartThings using Cloud to Cloud integration. You must create a remote login acct on TCP Mobile App.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png"
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png",
+	singleInstance: true
 )