MSA-691: ZigBee Hub

devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy

@@ -1,145 +0,0 @@
-/**
- *  Aeon Motor Controller
- *
- *  Copyright 2015 Bruce Ravenel
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Aeon Motor Controller", namespace: "bravenel", author: "Bruce Ravenel") {
-		capability "Refresh"
-		capability "Actuator"
-        capability "doorControl"
-        capability "Switch"
-
-        command "up"
-        command "down"
-        command "stop"
-
-//		fingerprint inClusters: "0x26,0x32"
-	}
-
-	simulator {
-        status "up":   "command: 2604, payload: FF"
-        status "down": "command: 2604, payload: 00"
-        status "stop": "command: 2605, payload: FE"
-
-		["FF", "FE", "00"].each { val ->
-			reply "2001$val,delay 100,2602": "command: 2603, payload: $val"
-		}
-	}
-
-	tiles {
-		standardTile("motor", "device.motor", width: 2, height: 2) {
-			state("stopUp", label:'stop', icon:"st.doors.garage.garage-open", action: 'down', backgroundColor:"#79b821")
-			state("stopDn", label:'stop', icon:"st.doors.garage.garage-closed", action: 'up', backgroundColor:"#79b821")
-			state("up", label:'up', icon:"st.doors.garage.garage-opening", action:'stop', backgroundColor:"#ffe71e")
-			state("down", label:'down', icon:"st.doors.garage.garage-closing", action:'stop', backgroundColor:"#ffe71e")
-		}
-		valueTile("energy", "device.energy", decoration: "flat") {
-			state "default", label:' '
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-        standardTile("stop", "device.switch") {
-        	state "default", label:"", action: "stop", icon:"http://cdn.device-icons.smartthings.com/sonos/stop-btn@2x.png"
-        }
-        standardTile("up", "device.switch") {
-        	state "default", label: "Up", action: "up", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-up@2x.png"
-        }
-        standardTile("down", "device.switch") {
-        	state "default", label: "Down", action: "down", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-down@2x.png"
-        }
-	}
-	main(["motor"])
-	details(["motor",  "refresh", "energy", "up", "down", "stop",])
-}
-
-// parse events into attributes
-def parse(String description) {
-	def result = []
-	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])
-	if (cmd) {
-		result = zwaveEvent(cmd)
-		log.debug("'$description' parsed to $result")
-	} else {
-		log.debug("Couldn't zwave.parse '$description'")
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	motorEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	motorEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
-	motorEvents(cmd)
-}
-
-def motorEvents(physicalgraph.zwave.Command cmd) {
-	def result = []
-    def switchEvent = []
-    if(cmd.value == 0) {switchEvent = createEvent(name: "motor", value: "down", descriptionText: text)}
-    else if(cmd.value == 254) {
-    	def stopVal = state.up ? "stopUp" : "stopDn"
-    	switchEvent = createEvent(name: "motor", value: stopVal, descriptionText: text)
-    }
-    else if(cmd.value == 255) {switchEvent = createEvent(name: "motor", value: "up", descriptionText: text)}
-	result << switchEvent
-}
-
-def refresh() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def up() {
-	state.up = true
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def down() {
-	state.up = false
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def stop() {
-	delayBetween([
-    	zwave.switchMultilevelV1.switchMultilevelStopLevelChange().format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def on() {
-	state.up = true
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}
-
-def off() {
-	state.up = false
-	delayBetween([
-    	zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.switchMultilevelV1.switchMultilevelGet().format()
-    ], 1000)
-}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -17,50 +17,44 @@ metadata {
 	}
 
 	simulator {
-
+		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setColor"
-			}
-
-			tileAttribute ("device.model", key: "SECONDARY_CONTROL") {
-				attributeState "model", label: '${currentValue}'
-			}
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
-			state "colorTemp", action:"color temperature.setColorTemperature"
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setColor"
 		}
 
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..9000)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main "switch"
-		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "rgbSelector", "colorTempSliderControl", "colorTemp"])
 	}
 }
 
@@ -76,7 +70,7 @@ def parse(String description) {
 def setHue(percentage) {
 	log.debug "setHue ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "hue:${percentage * 3.6}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "hue:${percentage * 3.6}"])
 		if (resp.status < 300) {
 			sendEvent(name: "hue", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -89,7 +83,7 @@ def setHue(percentage) {
 def setSaturation(percentage) {
 	log.debug "setSaturation ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "saturation:${percentage / 100}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "saturation:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "saturation", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -120,7 +114,7 @@ def setColor(Map color) {
 		}
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: attrs.join(" ")])
 		if (resp.status < 300) {
 			sendEvent(name: "color", value: color.hex)
 			sendEvent(name: "switch", value: "on")
@@ -141,10 +135,9 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", ["brightness": percentage / 100, "power": "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
-			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -155,7 +148,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -170,7 +163,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -179,7 +172,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -187,26 +180,19 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${selector()}")
-	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
-		return []
-	} else if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data[0]
-	log.debug("Data: ${data}")
+	def data = resp.data
 
-	sendEvent(name: "label", value: data.label)
-	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "level", value: sprintf("%.1f", (data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
-	sendEvent(name: "hue", value: data.color.hue / 3.6)
+	sendEvent(name: "hue",        value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
 	return []
 }
@@ -215,11 +201,3 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
-
-def selector() {
-	if (device.deviceNetworkId.contains(":")) {
-		return device.deviceNetworkId
-	} else {
-		return "id:${device.deviceNetworkId}"
-	}
-}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -16,44 +16,41 @@ metadata {
 	}
 
 	simulator {
-
+		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
 		}
-
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
-			state "colorTemp", action:"color temperature.setColorTemperature"
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
 		}
 
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main "switch"
-		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "colorTempSliderControl", "colorTemp"])
 	}
-
 }
 
 // parse events into attributes
@@ -75,10 +72,9 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [brightness: percentage / 100, power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
-			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -89,7 +85,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -104,7 +100,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -113,7 +109,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -121,22 +117,16 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${selector()}")
-	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
-		return []
-	} else if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data[0]
+	def data = resp.data
 
-	sendEvent(name: "label", value: data.label)
-	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "level", value: sprintf("%f", (data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: data.product.name)
 
 	return []
 }
@@ -145,11 +135,3 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
-
-def selector() {
-	if (device.deviceNetworkId.contains(":")) {
-		return device.deviceNetworkId
-	} else {
-		return "id:${device.deviceNetworkId}"
-	}
-}

smartapps/aneepct/my-app.src/my-app.groovy

@@ -0,0 +1,59 @@
+/**
+ *  My app
+ *
+ *  Copyright 2015 Aneep Tandel
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "My app",
+    namespace: "aneepct",
+    author: "Aneep Tandel",
+    description: "test app",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "Aneep Tandel", displayLink: ""])
+
+
+preferences {
+    section("Turn on when motion detected:") {
+        input "themotion", "capability.motionSensor", required: true, title: "Where?"
+    }
+    section("Turn on this door") {
+        input "theswitch", "capability.switch", required: true
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(themotion, "motion.active", motionDetectedHandler)
+}
+
+// TODO: implement event handlers
+def motionDetectedHandler(evt) {
+    log.debug "motionDetectedHandler called: $evt"
+    theswitch.on()
+}

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -5,23 +5,23 @@
  *
  */
 definition(
-		name: "LIFX (Connect)",
-		namespace: "smartthings",
-		author: "LIFX",
-		description: "Allows you to use LIFX smart light bulbs with SmartThings.",
-		category: "Convenience",
-		iconUrl: "https://cloud.lifx.com/images/lifx.png",
-		iconX2Url: "https://cloud.lifx.com/images/lifx.png",
-		iconX3Url: "https://cloud.lifx.com/images/lifx.png",
-		oauth: true,
-		singleInstance: true) {
-	appSetting "clientId"
-	appSetting "clientSecret"
-}
+	name: "LIFX (Connect)",
+	namespace: "smartthings",
+	author: "LIFX",
+	description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+	category: "Convenience",
+	iconUrl: "https://cloud.lifx.com/images/lifx.png",
+	iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+	iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+	oauth: true,
+	singleInstance: true) {
+		appSetting "clientId"
+		appSetting "clientSecret"
+	}
 
 
 preferences {
-	page(name: "Credentials", title: "LIFX", content: "authPage", install: true)
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: false)
 }
 
 mappings {
@@ -33,29 +33,29 @@ mappings {
 	path("/test") { action: [ GET: "oauthSuccess" ] }
 }
 
-def getServerUrl()               { return "https://graph.api.smartthings.com" }
-def getCallbackUrl()             { return "https://graph.api.smartthings.com/oauth/callback"}
-def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
-def getSecretKey()               { return appSettings.secretKey }
-def getClientId()                { return appSettings.clientId }
+def getServerUrl() { return "https://graph.api.smartthings.com" }
+def apiURL(path = '/') { return "https://api.lifx.com/v1beta1${path}" }
+def buildRedirectUrl(page) {
+	return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
+}
 
 def authPage() {
-	log.debug "authPage test1"
+	log.debug "authPage"
 	if (!state.lifxAccessToken) {
 		log.debug "no LIFX access token"
 		// This is the SmartThings access token
 		if (!state.accessToken) {
 			log.debug "no access token, create access token"
-			state.accessToken = createAccessToken() // predefined method
+			createAccessToken() // predefined method
 		}
 		def description = "Tap to enter LIFX credentials"
-		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}" // this triggers oauthInit() below
+		log.debug "app id: ${app.id}"
 		log.debug "redirect url: ${redirectUrl}"
-		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:false) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
+				// href(url:buildRedirectUrl("test"), title: "Message test")
 			}
 		}
 	} else {
@@ -63,15 +63,17 @@ def authPage() {
 
 		def options = locationOptions() ?: []
 		def count = options.size()
+        def refreshInterval = 3
 
-		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
+		return dynamicPage(name:"Credentials", title:"Select devices...", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Select your location") {
-				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options, submitOnChange: true
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options
 			}
 		}
 	}
 }
 
+
 // OAuth
 
 def oauthInit() {
@@ -110,7 +112,7 @@ def oauthCallback() {
 }
 
 def oauthReceiveToken(redirectUrl = null) {
-	// Not sure what redirectUrl is for
+
 	log.debug "receiveToken - params: ${params}"
 	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
 	def params = [
@@ -133,25 +135,25 @@ def oauthReceiveToken(redirectUrl = null) {
 
 def oauthSuccess() {
 	def message = """
-		<p>Your LIFX Account is now connected to SmartThings!</p>
-		<p>Click 'Done' to finish setup.</p>
-	"""
+        <p>Your LIFX Account is now connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
 def oauthFailure() {
 	def message = """
-		<p>The connection could not be established!</p>
-		<p>Click 'Done' to return to the menu.</p>
-	"""
+        <p>The connection could not be established!</p>
+        <p>Click 'Done' to return to the menu.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
 def oauthReceivedToken() {
 	def message = """
-		<p>Your LIFX Account is already connected to SmartThings!</p>
-		<p>Click 'Done' to finish setup.</p>
-	"""
+        <p>Your LIFX Account is already connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
@@ -159,74 +161,74 @@ def oauthConnectionStatus(message, redirectUrl = null) {
 	def redirectHtml = ""
 	if (redirectUrl) {
 		redirectHtml = """
-			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-		"""
+            <meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+        """
 	}
 
 	def html = """
-		<!DOCTYPE html>
-		<html>
-		<head>
-		<meta name="viewport" content="width=device-width">
-		<title>SmartThings Connection</title>
-		<style type="text/css">
-			@font-face {
-				font-family: 'Swiss 721 W01 Thin';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			@font-face {
-				font-family: 'Swiss 721 W01 Light';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			.container {
-				width: 280;
-				padding: 20px;
-				text-align: center;
-			}
-			img {
-				vertical-align: middle;
-			}
-			img:nth-child(2) {
-				margin: 0 15px;
-			}
-			p {
-				font-size: 1.2em;
-				font-family: 'Swiss 721 W01 Thin';
-				text-align: center;
-				color: #666666;
-				padding: 0 20px;
-				margin-bottom: 0;
-			}
-			span {
-				font-family: 'Swiss 721 W01 Light';
-			}
-		</style>
-		${redirectHtml}
-		</head>
-		<body>
-			<div class="container">
-				<img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
-				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
-				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
-				<p>
-					${message}
-				</p>
-			</div>
-		</body>
-		</html>
-	"""
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width">
+        <title>SmartThings Connection</title>
+        <style type="text/css">
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 280;
+                padding: 20px;
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 15px;
+            }
+            p {
+                font-size: 1.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                padding: 0 20px;
+                margin-bottom: 0;
+            }
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        ${redirectHtml}
+        </head>
+        <body>
+            <div class="container">
+                <img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+                <p>
+                    ${message}
+                </p>
+            </div>
+        </body>
+        </html>
+    """
 	render contentType: 'text/html', data: html
 }
 
@@ -237,6 +239,7 @@ String toQueryString(Map m) {
 // App lifecycle hooks
 
 def installed() {
+	enableCallback() // wtf does this do?
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -248,6 +251,7 @@ def installed() {
 
 // called after settings are changed
 def updated() {
+	enableCallback() // not sure what this does
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -301,36 +305,27 @@ def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
 			state.remove("lifxAccessToken")
 			options.logObject.warn "Access token is not valid"
 		}
-		return options.errorReturn
+		return options.errerReturn
 	} catch (java.net.SocketTimeoutException e) {
 		options.logObject.warn "Connection timed out, not much we can do here"
-		return options.errorReturn
+		return options.errerReturn
 	}
 }
 
 def apiGET(path) {
-	try {
-		httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
-			logResponse(response)
-			return response
-		}
-	} catch (groovyx.net.http.HttpResponseException e) {
-		logResponse(e.response)
-		return e.response
+	httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+		logResponse(response)
+		return response
 	}
 }
 
 def apiPUT(path, body = [:]) {
-	try {
-		log.debug("Beginning API PUT: ${path}, ${body}")
-		httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
-			logResponse(response)
-			return response
-		}
-	} catch (groovyx.net.http.HttpResponseException e) {
-		logResponse(e.response)
-		return e.response
-	}}
+	log.debug("Beginning API PUT: ${path}, ${body}")
+	httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+		logResponse(response)
+		return response
+	}
+}
 
 def devicesList(selector = '') {
 	logErrors([]) {
@@ -345,12 +340,12 @@ def devicesList(selector = '') {
 }
 
 Map locationOptions() {
+
 	def options = [:]
 	def devices = devicesList()
 	devices.each { device ->
 		options[device.location.id] = device.location.name
 	}
-	log.debug("Locations: ${options}")
 	return options
 }
 
@@ -364,32 +359,28 @@ def updateDevices() {
 		state.devices = [:]
 	}
 	def devices = devicesInLocation()
-	def selectors = []
-
-	log.debug("All selectors: ${selectors}")
-
+	def deviceIds = devices*.id
 	devices.each { device ->
 		def childDevice = getChildDevice(device.id)
-		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			log.info("Adding device ${device.id}: ${device.capabilities}")
 			def data = [
 					label: device.label,
-					level: Math.round((device.brightness ?: 1) * 100),
+					level: sprintf("%f", (device.brightness ?: 1) * 100),
 					switch: device.connected ? device.power : "unreachable",
 					colorTemperature: device.color.kelvin
 			]
-			if (device.product.capabilities.has_color) {
+			if (device.capabilities.has_color) {
 				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
 				data["hue"] = device.color.hue / 3.6
 				data["saturation"] = device.color.saturation * 100
-				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
+				childDevice = addChildDevice("smartthings", "LIFX Color Bulb", device.id, null, data)
 			} else {
-				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
+				childDevice = addChildDevice("smartthings", "LIFX White Bulb", device.id, null, data)
 			}
 		}
 	}
-	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
+	getChildDevices().findAll { !deviceIds.contains(it.deviceNetworkId) }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
 		deleteChildDevice(it.deviceNetworkId)
 	}
@@ -401,4 +392,4 @@ def refreshDevices() {
 	getChildDevices().each { device ->
 		device.refresh()
 	}
-}
+}

smartapps/smartthings/sonos-control.src/sonos-control.groovy

@@ -10,24 +10,24 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Control
+ *  Sonos Control
  *
  *  Author: SmartThings
  *
  *  Date: 2013-12-10
  */
 definition(
-    name: "Speaker Control",
+    name: "Sonos Control",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play or pause your Speaker when certain actions take place in your home.",
+    description: "Play or pause your Sonos when certain actions take place in your home.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Control your Sonos when something happens", install: true, uninstall: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
 			input "starting", "time", title: "Starting", required: false
@@ -81,7 +81,7 @@ def mainPage() {
 			]
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
+			input "sonos", "capability.musicPlayer", title: "Sonos music player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false

smartapps/smartthings/sonos-mood-music.src/sonos-mood-music.groovy

@@ -10,7 +10,7 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Mood Music
+ *  Sonos Mood Music
  *
  *  Author: SmartThings
  *  Date: 2014-02-12
@@ -65,7 +65,7 @@ private saveSelectedSong() {
 }
 
 definition(
-    name: "Speaker Mood Music",
+    name: "Sonos Mood Music",
     namespace: "smartthings",
     author: "SmartThings",
     description: "Plays a selected song or station.",
@@ -75,7 +75,7 @@ definition(
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a selected song or station on your Speaker when something happens", nextPage: "chooseTrack", uninstall: true)
+	page(name: "mainPage", title: "Play a selected song or station on your Sonos when something happens", nextPage: "chooseTrack", uninstall: true)
 	page(name: "chooseTrack", title: "Select a song", install: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -125,7 +125,7 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume", description: "0-100%", required: false

smartapps/smartthings/sonos-notify-with-sound.src/sonos-notify-with-sound.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Custom Message
+ *  Sonos Custom Message
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-	name: "Speaker Notify with Sound",
+	name: "Sonos Notify with Sound",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Play a sound or custom message through your Speaker when the mode changes or other events occur.",
+	description: "Play a sound or custom message through your Sonos when the mode changes or other events occur.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a message on your Speaker when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play a message on your Sonos when something happens", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -92,7 +92,7 @@ def mainPage() {
 			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after notification", required: false, defaultValue: true

smartapps/smartthings/sonos-weather-forecast.src/sonos-weather-forecast.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Weather Forecast
+ *  Sonos Weather Forecast
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-    name: "Speaker Weather Forecast",
+    name: "Sonos Weather Forecast",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play a weather report through your Speaker when the mode changes or other events occur",
+    description: "Play a weather report through your Sonos when the mode changes or other events occur",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play the weather report on your speaker", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play the weather report on your sonos", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -85,7 +85,7 @@ def mainPage() {
 			)
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after weather report finishes", required: false, defaultValue: true