Update timevalve-smart.groovy

Commenting out fingerprint temporarily to avoid potential conflicts with other devices as this devices is specifically for a Korean deployment in AP01 - see DVCSMP-1425

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -371,21 +371,50 @@ def getTemperature(value) {
 
 	def refresh() {
 		log.debug "Refreshing Values "
-		def refreshCmds = [
         
-        /* sensitivity - default value (8) */
+        def refreshCmds = []
         
-        "zcl mfg-code ${manufacturerCode}", "delay 200",
-        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+        	
+			log.debug "Refreshing Values for manufacturer: SmartThings "
+         	refreshCmds = refreshCmds + [
 
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (D200) 
+	               seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer. 
+	               Separating these out in a separate if-else because I do not want to touch Centralite part 
+	               as of now. 
+	            */
 
-        "zcl mfg-code ${manufacturerCode}", "delay 200",
-        "zcl global read 0xFC02 0x0010",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+	            "zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+	            "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+	            
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+	            "zcl global write 0xFC02 2 0x21 {D200}", "delay 200",
+            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+                
+            ]
+            
+        
+        } else {
+             refreshCmds = refreshCmds + [
+
+                /* sensitivity - default value (8) */
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+                "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+            ]
+        }
+        
+        //Common refresh commands
+        refreshCmds = refreshCmds + [
+            "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+            "st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+            "zcl mfg-code ${manufacturerCode}", "delay 200",
+            "zcl global read 0xFC02 0x0010",
+            "send 0x${device.deviceNetworkId} 1 1","delay 400"
+        ]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -461,19 +490,34 @@ private Map parseAxis(String description) {
 			xyzResults.x = signedX
             log.debug "X Part: ${signedX}"
         }
+        // Y and the Z axes are interchanged between SmartThings's implementation and Centralite's implementation
         else if (part.startsWith("13")) {
 			def unsignedY = hexToInt(part.split("13")[1].trim())
 			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
-			xyzResults.y = signedY
-            log.debug "Y Part: ${signedY}"
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+                xyzResults.z = -signedY
+                log.debug "Z Part: ${xyzResults.z}"
+                if (garageSensor == "Yes")
+                    garageEvent(xyzResults.z)
+            } 
+            else {
+                xyzResults.y = signedY
+                log.debug "Y Part: ${signedY}"
+            }
         }
         else if (part.startsWith("14")) {
 			def unsignedZ = hexToInt(part.split("14")[1].trim())
 			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
-			xyzResults.z = signedZ
-            log.debug "Z Part: ${signedZ}"
-			if (garageSensor == "Yes")
-				garageEvent(signedZ)
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+                xyzResults.y = signedZ
+                log.debug "Y Part: ${signedZ}"
+            } else {
+                xyzResults.z = signedZ
+                log.debug "Z Part: ${signedZ}"
+                if (garageSensor == "Yes")
+                    garageEvent(signedZ)
+            
+            }
         }
     }
 
@@ -553,3 +597,4 @@ private byte[] reverseArray(byte[] array) {
 	return array
 }
 
+

devicetypes/timevalve-gaslock-t-08/timevalve-smart.src/timevalve-smart.groovy

@@ -0,0 +1,243 @@
+metadata {
+        definition (name: "Timevalve Smart", namespace: "timevalve.gaslock.t-08", author: "ruinnel") {
+                capability "Valve"
+                capability "Refresh"
+                capability "Battery"
+                capability "Temperature Measurement"
+                
+                command "setRemaining"
+                command "setTimeout"
+                command "setTimeout10"
+                command "setTimeout20"
+                command "setTimeout30"
+                command "setTimeout40"
+                
+                command "remainingLevel"
+                
+                attribute "remaining", "number"
+                attribute "remainingText", "String"
+                attribute "timeout", "number"
+                
+                //raw desc : 0 0 0x1006 0 0 0 7 0x5E 0x86 0x72 0x5A 0x73 0x98 0x80
+                //fingerprint deviceId:"0x1006", inClusters:"0x5E, 0x86, 0x72, 0x5A, 0x73, 0x98, 0x80"
+        }
+
+        tiles (scale: 2) {
+        	multiAttributeTile(name:"statusTile", type:"generic", width:6, height:4) {
+            	tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+	            	attributeState "open", label: '${name}', action: "close", icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'${name}', action: "", icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+                tileAttribute("device.remainingText", key: "SECONDARY_CONTROL") {
+	            	attributeState "open", label: '${currentValue}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+            }
+            
+            standardTile("refreshTile", "command.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+            }
+            
+            controlTile("remainingSliderTile", "device.remaining", "slider", inactiveLabel: false, range:"(0..590)", height: 2, width: 4) {
+            	state "level", action:"remainingLevel"
+            }
+            valueTile("setRemaining", "device.remainingText", inactiveLabel: false, decoration: "flat", height: 2, width: 2){
+                state "remainingText", label:'${currentValue}\nRemaining'//, action: "setRemaining"//, icon: "st.Office.office6"
+            }
+
+            standardTile("setTimeout10", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'10Min', action: "setTimeout10", icon:"st.Health & Wellness.health7", defaultState: true
+                state "10", label:'10Min', action: "setTimeout10", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout20", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'20Min', action: "setTimeout20", icon:"st.Health & Wellness.health7", defaultState: true
+                state "20", label:'20Min', action: "setTimeout20", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout30", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'30Min', action: "setTimeout30", icon:"st.Health & Wellness.health7", defaultState: true
+                state "30", label:'30Min', action: "setTimeout30", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout40", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'40Min', action: "setTimeout40", icon:"st.Health & Wellness.health7", defaultState: true
+                state "40", label:'40Min', action: "setTimeout40", icon:"st.Office.office13"
+            }
+
+            valueTile("batteryTile", "device.battery", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "battery", label:'${currentValue}% battery', unit:""
+            }
+
+            main (["statusTile"])
+//            details (["statusTile", "remainingSliderTile", "setRemaining", "setTimeout10", "setTimeout20", "batteryTile", "refreshTile", "setTimeout30", "setTimeout40"])
+//            details (["statusTile", "batteryTile", "setRemaining", "refreshTile"])
+            details (["statusTile", "batteryTile", "refreshTile"])
+        }
+}
+
+def parse(description) {
+//	log.debug "parse - " + description
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent(descriptionText: description, isStateChange: true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+		if (cmd) {
+        	log.debug "parsed cmd = " + cmd
+			result = zwaveEvent(cmd)
+			//log.debug("'$description' parsed to $result")
+		} else {
+			log.debug("Couldn't zwave.parse '$description'")
+		}
+	}
+	return result
+}
+
+// 복호화 후 zwaveEvent() 호출
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	//log.debug "SecurityMessageEncapsulation - " + cmd
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		state.sec = 1
+        log.debug "encapsulatedCommand = " + encapsulatedCommand
+        zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	//log.debug "switch status - " + cmd.value
+    createEvent(name:"contact", value: cmd.value ? "open" : "closed")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+    def map = [ name: "battery", unit: "%" ]
+    if (cmd.batteryLevel == 0xFF) {  // Special value for low battery alert
+        map.value = 1
+        map.descriptionText = "${device.displayName} has a low battery"
+        map.isStateChange = true
+    } else {
+        map.value = cmd.batteryLevel
+    }
+    
+    log.debug "battery - ${map.value}${map.unit}"
+    // Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = new Date().time
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+  //log.debug "zwaveEvent - ${device.displayName}: ${cmd}"
+  createEvent(descriptionText: "${device.displayName}: ${cmd}")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def result = []
+	log.info "zwave.configurationV1.configurationGet - " + cmd
+    def array = cmd.configurationValue
+    def value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    if (device.currentValue("contact") == "open") {
+    	value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    } else {
+    	value = 0
+    }
+    
+    if (device.currentValue('contact') == 'open') {
+    	def hour = value.intdiv(60);
+        def min = (value % 60).toString().padLeft(2, '0');
+        def text = "${hour}:${min}M"
+        
+        log.info "remain - " + text
+        result.add( createEvent(name: "remaining", value: value, displayed: false, isStateChange: true) )
+        result.add( createEvent(name: "remainingText", value: text, displayed: false, isStateChange: true) )
+    } else {
+    	result.add( createEvent(name: "timeout", value: value, displayed: false, isStateChange: true) )
+    }
+    return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def type = cmd.notificationType
+    if (type == cmd.NOTIFICATION_TYPE_HEAT) {
+    	log.info "NotificationReport - ${type}"
+        createEvent(name: "temperature", value: 999, unit: "C", descriptionText: "${device.displayName} is over heat!", displayed: true, isStateChange: true)
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	def type = cmd.alarmType
+    def level = cmd.alarmLevel
+    
+    log.info "AlarmReport - type : ${type}, level : ${level}"
+    def msg = "${device.displayName} is over heat!"
+    def result = createEvent(name: "temperature", value: 999, unit: "C", descriptionText: msg, displayed: true, isStateChange: true)
+    if (sendPushMessage) {
+    	sendPushMessage(msg)
+    }
+    return result
+}
+
+// remote open not allow
+def open() {}
+
+def close() {
+//	log.debug 'cmd - close()'
+    commands([
+        zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00),
+		zwave.switchBinaryV1.switchBinaryGet()
+	])
+}
+
+def setTimeout10() { setTimeout(10) }
+def setTimeout20() { setTimeout(20) }
+def setTimeout30() { setTimeout(30) }
+def setTimeout40() { setTimeout(40) }
+
+
+def setTimeout(value) {
+//	log.debug "setDefaultTime($value)"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 4, scaledConfigurationValue: value * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x01)
+    ]);
+}
+
+def remainingLevel(value) {
+//	log.debug "remainingLevel($value)"
+    def hour = value.intdiv(60);
+    def min = (value % 60).toString().padLeft(2, '0');
+    def text = "${hour}:${min}M"
+    sendEvent(name: "remaining", value: value, displayed: false, isStateChange: true)
+    sendEvent(name: "remainingText", value: text, displayed: false, isStateChange: true)
+}
+
+def setRemaining() {
+	def remaining = device.currentValue("remaining")
+//	log.debug "setConfiguration() - remaining : $remaining"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x03, size: 4, scaledConfigurationValue: remaining * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+    ]);
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec != 0 && !(cmd instanceof physicalgraph.zwave.commands.batteryv1.BatteryGet)) {
+    	log.debug "cmd = " + cmd + ", encapsulation"
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+    	log.debug "cmd = " + cmd + ", plain"
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def refresh() {
+//	log.debug 'cmd - refresh()'
+	commands([
+    			zwave.batteryV1.batteryGet(),
+                zwave.switchBinaryV1.switchBinaryGet(),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x01),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+        ], 400)
+}

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -22,9 +22,9 @@ definition(
     author: "SmartThings & Joe Geiger",
     description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
     category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png"
 )
 
 preferences {