Merge pull request #385 from SmartThingsCommunity/rich-simulated-thermostat

Adding multiAttributeTile definition to Simulated Thermostat device type handler

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -0,0 +1,153 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
+        capability "Tone"
+        capability "Actuator"
+        capability "Presence Sensor"
+        capability "Sensor"
+        capability "Battery"
+        capability "Configuration"
+
+        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
+                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
+    }
+
+    preferences {
+        section {
+            image(name: 'educationalcontent', multiple: true, images: [
+                "http://cdn.device-gse.smartthings.com/Arrival/Arrival1.png",
+                "http://cdn.device-gse.smartthings.com/Arrival/Arrival2.png"
+                ])
+        }
+        section {
+            input "checkInterval", "enum", title: "Presence timeout (minutes)",
+                    defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        }
+    }
+
+    tiles {
+        standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+        }
+        standardTile("beep", "device.beep", decoration: "flat") {
+            state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
+        }
+        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        main "presence"
+        details(["presence", "beep", "battery"])
+    }
+}
+
+def updated() {
+    startTimer()
+}
+
+def configure() {
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
+    log.debug "configure -- cmds: ${cmds}"
+    return cmds
+}
+
+def beep() {
+    log.debug "Sending Identify command to beep the sensor for 5 seconds"
+    return zigbee.command(0x0003, 0x00, "0500")
+}
+
+def parse(String description) {
+    state.lastCheckin = now()
+    handlePresenceEvent(true)
+
+    if (description?.startsWith('read attr -')) {
+        handleReportAttributeMessage(description)
+    }
+}
+
+private handleReportAttributeMessage(String description) {
+    def descMap = zigbee.parseDescriptionAsMap(description)
+
+    if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+        handleBatteryEvent(Integer.parseInt(descMap.value, 16))
+    }
+}
+
+private handleBatteryEvent(rawValue) {
+    def linkText = getLinkText(device)
+
+    def eventMap = [
+        name: 'battery',
+        value: '--'
+    ]
+
+    def volts = rawValue / 10
+    if (volts > 0){
+        def minVolts = 2.0
+        def maxVolts = 2.8
+
+        if (volts < minVolts)
+            volts = minVolts
+        else if (volts > maxVolts)
+            volts = maxVolts
+        def pct = (volts - minVolts) / (maxVolts - minVolts)
+
+        eventMap.value = Math.round(pct * 100)
+        eventMap.descriptionText = "${linkText} battery was ${eventMap.value}%"
+    }
+
+    log.debug "Creating battery event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        log.debug "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        log.debug "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    log.debug "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    log.debug "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    log.debug "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    log.debug "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -67,7 +67,7 @@ metadata {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
 		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}°'
+			state "thermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -204,8 +204,10 @@ private List parseReportAttributeMessage(String description) {
 		}
         result << getAccelerationResult(descMap.value)
 	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
-        result << parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -371,21 +373,50 @@ def getTemperature(value) {
 
 	def refresh() {
 		log.debug "Refreshing Values "
-		def refreshCmds = [
         
-        /* sensitivity - default value (8) */
+        def refreshCmds = []
         
-        "zcl mfg-code ${manufacturerCode}", "delay 200",
-        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		if (device.getDataValue("manufacturer") == "SmartThings") {
+        	
+			log.debug "Refreshing Values for manufacturer: SmartThings "
+         	refreshCmds = refreshCmds + [
 
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+	               seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer. 
+	               Separating these out in a separate if-else because I do not want to touch Centralite part 
+	               as of now. 
+	            */
 
-        "zcl mfg-code ${manufacturerCode}", "delay 200",
-        "zcl global read 0xFC02 0x0010",
-        "send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+	            "zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+	            "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+	            
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+	            "zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+                
+            ]
+            
+        
+        } else {
+             refreshCmds = refreshCmds + [
+
+                /* sensitivity - default value (8) */
+	            "zcl mfg-code ${manufacturerCode}", "delay 200",
+                "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+            	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+            ]
+        }
+        
+        //Common refresh commands
+        refreshCmds = refreshCmds + [
+            "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+            "st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+            "zcl mfg-code ${manufacturerCode}", "delay 200",
+            "zcl global read 0xFC02 0x0010",
+            "send 0x${device.deviceNetworkId} 1 1","delay 400"
+        ]
 
 		return refreshCmds + enrollResponse()
 	}
@@ -447,35 +478,34 @@ def enrollResponse() {
 	]
 }
 
-
 private Map parseAxis(String description) {
-	log.debug "parseAxis"
-	def xyzResults = [x: 0, y: 0, z: 0]
-    def parts = description.split("2900")
-    parts[0] = "12" + parts[0]
-    parts.each { part ->
-    	part = part.trim()
-        if (part.startsWith("12")) {
-    		def unsignedX = hexToInt(part.split("12")[1].trim())
-			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
-			xyzResults.x = signedX
-            log.debug "X Part: ${signedX}"
-        }
-        else if (part.startsWith("13")) {
-			def unsignedY = hexToInt(part.split("13")[1].trim())
-			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
-			xyzResults.y = signedY
-            log.debug "Y Part: ${signedY}"
-        }
-        else if (part.startsWith("14")) {
-			def unsignedZ = hexToInt(part.split("14")[1].trim())
-			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
-			xyzResults.z = signedZ
-            log.debug "Z Part: ${signedZ}"
-			if (garageSensor == "Yes")
-				garageEvent(signedZ)
-        }
-    }
+	def hexToSignedInt = { hexVal ->
+		def unsignedVal = hexToInt(hexVal)
+		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+	}
+
+	def z = hexToSignedInt(description[0..3])
+	def y = hexToSignedInt(description[10..13])
+	def x = hexToSignedInt(description[20..23])
+	def xyzResults = [x: x, y: y, z: z]
+
+	if (device.getDataValue("manufacturer") == "SmartThings") {
+		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
+		xyzResults.x = z
+		xyzResults.y = y
+		xyzResults.z = -x
+	} else {
+		// The axises reported by the Device Handler differ from the axises reported by the sensor
+		// This may change in the future
+		xyzResults.x = z
+		xyzResults.y = x
+		xyzResults.z = y
+	}
+
+	log.debug "parseAxis -- ${xyzResults}"
+
+	if (garageSensor == "Yes")
+		garageEvent(xyzResults.z)
 
 	getXyzResult(xyzResults, description)
 }
@@ -553,3 +583,4 @@ private byte[] reverseArray(byte[] array) {
 	return array
 }
 
+

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2014 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
+		capability "Relative Humidity Measurement"
 
 		command "tempUp"
 		command "tempDown"
@@ -22,11 +23,40 @@ metadata {
 		command "heatDown"
 		command "coolUp"
 		command "coolDown"
-        command "setTemperature", ["number"]
+		command "setTemperature", ["number"]
 	}
 
-	tiles {
-		valueTile("temperature", "device.temperature", width: 1, height: 1) {
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("default", action: "setTemperature")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -39,51 +69,51 @@ metadata {
 				]
 			)
 		}
-		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"tempDown"
 		}
-		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"tempUp"
 		}
 
-		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
-		standardTile("heatDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"heatDown"
 		}
-		standardTile("heatUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"heatUp"
 		}
 
-		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
-		standardTile("coolDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"coolDown"
 		}
-		standardTile("coolUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"coolUp"
 		}
 
-		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
 			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
 			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
 			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
 			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
 			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
 		}
-		standardTile("operatingState", "device.thermostatOperatingState") {
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
 			state "idle", label:'${name}', backgroundColor:"#ffffff"
 			state "heating", label:'${name}', backgroundColor:"#ffa81e"
 			state "cooling", label:'${name}', backgroundColor:"#269bd2"
 		}
 
-		main("temperature","operatingState")
+		main("thermostatMulti")
 		details([
 			"temperature","tempDown","tempUp",
 			"mode", "fanMode", "operatingState",
@@ -101,6 +131,7 @@ def installed() {
 	sendEvent(name: "thermostatMode", value: "off")
 	sendEvent(name: "thermostatFanMode", value: "fanAuto")
 	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
 }
 
 def parse(String description) {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -29,7 +29,7 @@ metadata {
 
 	tiles {
 
-		valueTile("power", "device.power") {
+		valueTile("power", "device.power", canChangeIcon: true) {
 			state "power", label: '${currentValue} W'
 		}
 

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -273,7 +273,7 @@ User-Agent: CyberGarage-HTTP/1.0
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -77,9 +77,8 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-    unschedule("setOffline")
+    	unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
-
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
@@ -134,7 +133,7 @@ def refresh() {
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -28,6 +28,7 @@
         command "subscribe"
         command "resubscribe"
         command "unsubscribe"
+        command "setOffline"
  }
 
  // simulator metadata
@@ -207,7 +208,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"
+         log.debug "Updating ip from $existingIp to $ip"    
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -275,7 +276,7 @@ def setOffline() {
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(10, setOffline)
+    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -290,4 +291,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Vinli Home Beta
+ *
+ *  Copyright 2015 Daniel
+ *
+ */
+definition(
+    name: "Vinli Home Connect",
+    namespace: "com.vinli.smartthings",
+    author: "Daniel",
+    description: "Allows Vinli users to connect their car to SmartThings",
+    category: "SmartThings Labs",
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_60.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
+    oauth: true)
+  
+preferences {
+  section ("Allow external service to control these things...") {
+    input "switches", "capability.switch", multiple: true, required: true
+    input "locks", "capability.lock", multiple: true, required: true
+  }
+}
+
+mappings {
+  
+  path("/devices") {
+    action: [
+      GET: "listAllDevices"
+    ]
+  }
+	
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+  path("/switches/:id/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+   path("/locks/:command") {
+    action: [
+      PUT: "updateLocks"
+    ]
+  }
+  path("/locks/:id/:command") {
+    action: [
+      PUT: "updateLock"
+    ]
+  }
+  
+   path("/devices/:id/:command") {
+    action: [
+      PUT: "commandDevice"
+    ]
+  }
+}
+
+// returns a list of all devices
+def listAllDevices() {
+   	def resp = []
+   	switches.each {
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
+    }
+    
+    locks.each {
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
+    }
+    return resp
+}
+ 
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def listSwitches() {
+    def resp = []
+    switches.each {
+      resp << [name: it.displayName, value: it.currentValue("switch"), type: "switch", id: it.id]
+    }
+    return resp
+}
+
+void updateLocks() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    if (command) {
+
+        // check that the switch supports the specified command
+        // If not, return an error using httpError, providing a HTTP status code.
+        locks.each {
+            if (!it.hasCommand(command)) {
+                httpError(501, "$command is not a valid command for all switches specified")
+            } 
+        }
+        
+        // all switches have the comand
+        // execute the command on all switches
+        // (note we can do this on the array - the command will be invoked on every element
+        locks."$command"()
+    }
+}
+
+void updateLock() {
+    def command = params.command
+    
+    locks.each {
+      	if (!it.hasCommand(command)) {
+            httpError(400, "$command is not a valid command for all lock specified")
+        }
+        
+        if (it.id == params.id) {
+            it."$command"()
+        }
+    }
+}
+
+void updateSwitch() {
+    def command = params.command
+    
+    switches.each {
+      	if (!it.hasCommand(command)) {
+            httpError(400, "$command is not a valid command for all switches specified")
+        }
+        
+        if (it.id == params.id) {
+            it."$command"()
+        }
+    }
+}
+
+void commandDevice() {
+    def command = params.command
+    def devices = []
+    
+    switches.each {
+    	devices << it
+    }
+    
+    locks.each {
+    	devices << it
+    }
+    
+    devices.each {
+        if (it.id == params.id) {
+            if (!it.hasCommand(command)) {
+                httpError(400, "$command is not a valid command for specified device")
+            }
+            it."$command"()
+        }
+    }
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    if (command) {
+
+        // check that the switch supports the specified command
+        // If not, return an error using httpError, providing a HTTP status code.
+        switches.each {
+            if (!it.hasCommand(command)) {
+                httpError(400, "$command is not a valid command for all switches specified")
+            } 
+        }
+        
+        // all switches have the comand
+        // execute the command on all switches
+        // (note we can do this on the array - the command will be invoked on every element
+        switches."$command"()
+    }
+}
+
+ def installed() {
+	log.debug "Installed with settings: ${settings}"
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+}

smartapps/lock-auto-super-enhanced/enhanced-auto-lock-door.src/enhanced-auto-lock-door.groovy

@@ -13,7 +13,7 @@ preferences{
         input "lock1", "capability.lock", required: true
     }
     section("Select the door contact sensor:") {
-    	input "contact", "capability.contactSensor", required: true
+        input "contact", "capability.contactSensor", required: true
     }   
     section("Automatically lock the door when closed...") {
         input "minutesLater", "number", title: "Delay (in minutes):", required: true
@@ -22,9 +22,10 @@ preferences{
         input "secondsLater", "number", title: "Delay (in seconds):", required: true
     }
     section( "Notifications" ) {
-		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes", "No"]], required: false
-		input "phoneNumber", "phone", title: "Enter phone number to send text notification.", required: false
-	}
+        input("recipients", "contact", title: "Send notifications to", required: false) {
+            input "phoneNumber", "phone", title: "Warn with text message (optional)", description: "Phone Number", required: false
+        }
+    }
 }
 
 def installed(){
@@ -42,55 +43,73 @@ def initialize(){
     subscribe(lock1, "lock", doorHandler, [filterEvents: false])
     subscribe(lock1, "unlock", doorHandler, [filterEvents: false])  
     subscribe(contact, "contact.open", doorHandler)
-	subscribe(contact, "contact.closed", doorHandler)
+    subscribe(contact, "contact.closed", doorHandler)
 }
 
 def lockDoor(){
     log.debug "Locking the door."
     lock1.lock()
-    log.debug ( "Sending Push Notification..." ) 
-    if ( sendPushMessage != "No" ) sendPush( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
-    log.debug("Sending text message...")
-    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
+    if(location.contactBookEnabled) {
+        if ( recipients ) {
+            log.debug ( "Sending Push Notification..." ) 
+            sendNotificationToContacts( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!", recipients)
+        }
+    }
+    if (phoneNumber) {
+        log.debug("Sending text message...")
+        sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!")
+    }
 }
 
 def unlockDoor(){
     log.debug "Unlocking the door."
     lock1.unlock()
-    log.debug ( "Sending Push Notification..." ) 
-    if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
-    log.debug("Sending text message...")
-    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
+    if(location.contactBookEnabled) {
+        if ( recipients ) {
+            log.debug ( "Sending Push Notification..." ) 
+            sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!", recipients)
+        }
+    }
+    if ( phoneNumber ) {
+        log.debug("Sending text message...")
+        sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!")
+    }
 }
 
 def doorHandler(evt){
     if ((contact.latestValue("contact") == "open") && (evt.value == "locked")) { // If the door is open and a person locks the door then...  
-        def delay = (secondsLater) // runIn uses seconds
-        runIn( delay, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
+        //def delay = (secondsLater) // runIn uses seconds
+        runIn( secondsLater, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
     }
     else if ((contact.latestValue("contact") == "open") && (evt.value == "unlocked")) { // If the door is open and a person unlocks it then...
         unschedule( unlockDoor ) // ...we don't need to unlock it later.
-	}
+    }
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "locked")) { // If the door is closed and a person manually locks it then...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }   
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "unlocked")) { // If the door is closed and a person unlocks it then...
-        def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
+       //def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "open")) { // If a person opens an unlocked door...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "closed")) { // If a person closes an unlocked door...
-        def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
-	}
+        //def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
+    }
     else { //Opening or Closing door when locked (in case you have a handle lock)
-    	log.debug "Unlocking the door."
-		lock1.unlock()
-        log.debug ( "Sending Push Notification..." ) 
-    	if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
-        log.debug("Sending text message...")
-    	if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
-		}
+        log.debug "Unlocking the door."
+        lock1.unlock()
+        if(location.contactBookEnabled) {
+            if ( recipients ) {
+                log.debug ( "Sending Push Notification..." ) 
+                sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!", recipients)
+            }
+        }
+        if ( phoneNumber ) {
+            log.debug("Sending text message...")
+            sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!")
+        }
+    }
 }

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -22,9 +22,9 @@ definition(
     author: "SmartThings & Joe Geiger",
     description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
     category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png"
 )
 
 preferences {