Update timevalve-smart.groovy

Commenting out fingerprint temporarily to avoid potential conflicts with other devices as this devices is specifically for a Korean deployment in AP01 - see DVCSMP-1425

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -67,7 +67,7 @@ metadata {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
 		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "thermostatSetpoint", label:'${currentValue}'
+			state "thermostatSetpoint", label:'${currentValue}°'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -204,10 +204,8 @@ private List parseReportAttributeMessage(String description) {
 		}
         result << getAccelerationResult(descMap.value)
 	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
+	else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -381,7 +379,7 @@ def getTemperature(value) {
 			log.debug "Refreshing Values for manufacturer: SmartThings "
          	refreshCmds = refreshCmds + [
 
-	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+	            /* These values of Motion Threshold Multiplier(01) and Motion Threshold (D200) 
 	               seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer. 
 	               Separating these out in a separate if-else because I do not want to touch Centralite part 
 	               as of now. 
@@ -392,7 +390,7 @@ def getTemperature(value) {
 	            "send 0x${device.deviceNetworkId} 1 1", "delay 400",
 	            
 	            "zcl mfg-code ${manufacturerCode}", "delay 200",
-	            "zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+	            "zcl global write 0xFC02 2 0x21 {D200}", "delay 200",
             	"send 0x${device.deviceNetworkId} 1 1", "delay 400",
                 
             ]
@@ -478,34 +476,50 @@ def enrollResponse() {
 	]
 }
 
+
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
-	def z = hexToSignedInt(description[0..3])
-	def y = hexToSignedInt(description[10..13])
-	def x = hexToSignedInt(description[20..23])
-	def xyzResults = [x: x, y: y, z: z]
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
-	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
-	}
-
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		garageEvent(xyzResults.z)
+	log.debug "parseAxis"
+	def xyzResults = [x: 0, y: 0, z: 0]
+    def parts = description.split("2900")
+    parts[0] = "12" + parts[0]
+    parts.each { part ->
+    	part = part.trim()
+        if (part.startsWith("12")) {
+    		def unsignedX = hexToInt(part.split("12")[1].trim())
+			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
+			xyzResults.x = signedX
+            log.debug "X Part: ${signedX}"
+        }
+        // Y and the Z axes are interchanged between SmartThings's implementation and Centralite's implementation
+        else if (part.startsWith("13")) {
+			def unsignedY = hexToInt(part.split("13")[1].trim())
+			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+                xyzResults.z = -signedY
+                log.debug "Z Part: ${xyzResults.z}"
+                if (garageSensor == "Yes")
+                    garageEvent(xyzResults.z)
+            } 
+            else {
+                xyzResults.y = signedY
+                log.debug "Y Part: ${signedY}"
+            }
+        }
+        else if (part.startsWith("14")) {
+			def unsignedZ = hexToInt(part.split("14")[1].trim())
+			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
+			if (device.getDataValue("manufacturer") == "SmartThings") {
+                xyzResults.y = signedZ
+                log.debug "Y Part: ${signedZ}"
+            } else {
+                xyzResults.z = signedZ
+                log.debug "Z Part: ${signedZ}"
+                if (garageSensor == "Yes")
+                    garageEvent(signedZ)
+            
+            }
+        }
+    }
 
 	getXyzResult(xyzResults, description)
 }

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -29,7 +29,7 @@ metadata {
 
 	tiles {
 
-		valueTile("power", "device.power", canChangeIcon: true) {
+		valueTile("power", "device.power") {
 			state "power", label: '${currentValue} W'
 		}
 

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -273,7 +273,7 @@ User-Agent: CyberGarage-HTTP/1.0
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -77,8 +77,9 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-    	unschedule("setOffline")
+    unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
+
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
@@ -133,7 +134,7 @@ def refresh() {
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -28,7 +28,6 @@
         command "subscribe"
         command "resubscribe"
         command "unsubscribe"
-        command "setOffline"
  }
 
  // simulator metadata
@@ -208,7 +207,7 @@ def subscribe(ip, port) {
     def existingIp = getDataValue("ip")
     def existingPort = getDataValue("port")
     if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"    
+         log.debug "Updating ip from $existingIp to $ip"
     	 updateDataValue("ip", ip)
     	 def ipvalue = convertHexToIP(getDataValue("ip"))
          sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
@@ -276,7 +275,7 @@ def setOffline() {
 def poll() {
 log.debug "Executing 'poll'"
 if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
+    runIn(10, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -291,4 +290,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/timevalve-gaslock-t-08/timevalve-smart.src/timevalve-smart.groovy

@@ -0,0 +1,243 @@
+metadata {
+        definition (name: "Timevalve Smart", namespace: "timevalve.gaslock.t-08", author: "ruinnel") {
+                capability "Valve"
+                capability "Refresh"
+                capability "Battery"
+                capability "Temperature Measurement"
+                
+                command "setRemaining"
+                command "setTimeout"
+                command "setTimeout10"
+                command "setTimeout20"
+                command "setTimeout30"
+                command "setTimeout40"
+                
+                command "remainingLevel"
+                
+                attribute "remaining", "number"
+                attribute "remainingText", "String"
+                attribute "timeout", "number"
+                
+                //raw desc : 0 0 0x1006 0 0 0 7 0x5E 0x86 0x72 0x5A 0x73 0x98 0x80
+                //fingerprint deviceId:"0x1006", inClusters:"0x5E, 0x86, 0x72, 0x5A, 0x73, 0x98, 0x80"
+        }
+
+        tiles (scale: 2) {
+        	multiAttributeTile(name:"statusTile", type:"generic", width:6, height:4) {
+            	tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+	            	attributeState "open", label: '${name}', action: "close", icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'${name}', action: "", icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+                tileAttribute("device.remainingText", key: "SECONDARY_CONTROL") {
+	            	attributeState "open", label: '${currentValue}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+	            	attributeState "closed", label:'', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+    	        }
+            }
+            
+            standardTile("refreshTile", "command.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+            }
+            
+            controlTile("remainingSliderTile", "device.remaining", "slider", inactiveLabel: false, range:"(0..590)", height: 2, width: 4) {
+            	state "level", action:"remainingLevel"
+            }
+            valueTile("setRemaining", "device.remainingText", inactiveLabel: false, decoration: "flat", height: 2, width: 2){
+                state "remainingText", label:'${currentValue}\nRemaining'//, action: "setRemaining"//, icon: "st.Office.office6"
+            }
+
+            standardTile("setTimeout10", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'10Min', action: "setTimeout10", icon:"st.Health & Wellness.health7", defaultState: true
+                state "10", label:'10Min', action: "setTimeout10", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout20", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'20Min', action: "setTimeout20", icon:"st.Health & Wellness.health7", defaultState: true
+                state "20", label:'20Min', action: "setTimeout20", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout30", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'30Min', action: "setTimeout30", icon:"st.Health & Wellness.health7", defaultState: true
+                state "30", label:'30Min', action: "setTimeout30", icon:"st.Office.office13"
+            }
+            standardTile("setTimeout40", "device.remaining", inactiveLabel: false, decoration: "flat") {
+                state "default", label:'40Min', action: "setTimeout40", icon:"st.Health & Wellness.health7", defaultState: true
+                state "40", label:'40Min', action: "setTimeout40", icon:"st.Office.office13"
+            }
+
+            valueTile("batteryTile", "device.battery", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+                state "battery", label:'${currentValue}% battery', unit:""
+            }
+
+            main (["statusTile"])
+//            details (["statusTile", "remainingSliderTile", "setRemaining", "setTimeout10", "setTimeout20", "batteryTile", "refreshTile", "setTimeout30", "setTimeout40"])
+//            details (["statusTile", "batteryTile", "setRemaining", "refreshTile"])
+            details (["statusTile", "batteryTile", "refreshTile"])
+        }
+}
+
+def parse(description) {
+//	log.debug "parse - " + description
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent(descriptionText: description, isStateChange: true)
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+		if (cmd) {
+        	log.debug "parsed cmd = " + cmd
+			result = zwaveEvent(cmd)
+			//log.debug("'$description' parsed to $result")
+		} else {
+			log.debug("Couldn't zwave.parse '$description'")
+		}
+	}
+	return result
+}
+
+// 복호화 후 zwaveEvent() 호출
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	//log.debug "SecurityMessageEncapsulation - " + cmd
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		state.sec = 1
+        log.debug "encapsulatedCommand = " + encapsulatedCommand
+        zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	//log.debug "switch status - " + cmd.value
+    createEvent(name:"contact", value: cmd.value ? "open" : "closed")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+    def map = [ name: "battery", unit: "%" ]
+    if (cmd.batteryLevel == 0xFF) {  // Special value for low battery alert
+        map.value = 1
+        map.descriptionText = "${device.displayName} has a low battery"
+        map.isStateChange = true
+    } else {
+        map.value = cmd.batteryLevel
+    }
+    
+    log.debug "battery - ${map.value}${map.unit}"
+    // Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = new Date().time
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+  //log.debug "zwaveEvent - ${device.displayName}: ${cmd}"
+  createEvent(descriptionText: "${device.displayName}: ${cmd}")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def result = []
+	log.info "zwave.configurationV1.configurationGet - " + cmd
+    def array = cmd.configurationValue
+    def value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    if (device.currentValue("contact") == "open") {
+    	value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
+    } else {
+    	value = 0
+    }
+    
+    if (device.currentValue('contact') == 'open') {
+    	def hour = value.intdiv(60);
+        def min = (value % 60).toString().padLeft(2, '0');
+        def text = "${hour}:${min}M"
+        
+        log.info "remain - " + text
+        result.add( createEvent(name: "remaining", value: value, displayed: false, isStateChange: true) )
+        result.add( createEvent(name: "remainingText", value: text, displayed: false, isStateChange: true) )
+    } else {
+    	result.add( createEvent(name: "timeout", value: value, displayed: false, isStateChange: true) )
+    }
+    return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def type = cmd.notificationType
+    if (type == cmd.NOTIFICATION_TYPE_HEAT) {
+    	log.info "NotificationReport - ${type}"
+        createEvent(name: "temperature", value: 999, unit: "C", descriptionText: "${device.displayName} is over heat!", displayed: true, isStateChange: true)
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	def type = cmd.alarmType
+    def level = cmd.alarmLevel
+    
+    log.info "AlarmReport - type : ${type}, level : ${level}"
+    def msg = "${device.displayName} is over heat!"
+    def result = createEvent(name: "temperature", value: 999, unit: "C", descriptionText: msg, displayed: true, isStateChange: true)
+    if (sendPushMessage) {
+    	sendPushMessage(msg)
+    }
+    return result
+}
+
+// remote open not allow
+def open() {}
+
+def close() {
+//	log.debug 'cmd - close()'
+    commands([
+        zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00),
+		zwave.switchBinaryV1.switchBinaryGet()
+	])
+}
+
+def setTimeout10() { setTimeout(10) }
+def setTimeout20() { setTimeout(20) }
+def setTimeout30() { setTimeout(30) }
+def setTimeout40() { setTimeout(40) }
+
+
+def setTimeout(value) {
+//	log.debug "setDefaultTime($value)"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 4, scaledConfigurationValue: value * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x01)
+    ]);
+}
+
+def remainingLevel(value) {
+//	log.debug "remainingLevel($value)"
+    def hour = value.intdiv(60);
+    def min = (value % 60).toString().padLeft(2, '0');
+    def text = "${hour}:${min}M"
+    sendEvent(name: "remaining", value: value, displayed: false, isStateChange: true)
+    sendEvent(name: "remainingText", value: text, displayed: false, isStateChange: true)
+}
+
+def setRemaining() {
+	def remaining = device.currentValue("remaining")
+//	log.debug "setConfiguration() - remaining : $remaining"
+    commands([
+    	zwave.configurationV1.configurationSet(parameterNumber: 0x03, size: 4, scaledConfigurationValue: remaining * 60),
+        zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+    ]);
+}
+
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec != 0 && !(cmd instanceof physicalgraph.zwave.commands.batteryv1.BatteryGet)) {
+    	log.debug "cmd = " + cmd + ", encapsulation"
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+    	log.debug "cmd = " + cmd + ", plain"
+		cmd.format()
+	}
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
+}
+
+def refresh() {
+//	log.debug 'cmd - refresh()'
+	commands([
+    			zwave.batteryV1.batteryGet(),
+                zwave.switchBinaryV1.switchBinaryGet(),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x01),
+                zwave.configurationV1.configurationGet(parameterNumber: 0x03)
+        ], 400)
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -1,189 +0,0 @@
-/**
- *  Vinli Home Beta
- *
- *  Copyright 2015 Daniel
- *
- */
-definition(
-    name: "Vinli Home Connect",
-    namespace: "com.vinli.smartthings",
-    author: "Daniel",
-    description: "Allows Vinli users to connect their car to SmartThings",
-    category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_60.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    oauth: true)
-  
-preferences {
-  section ("Allow external service to control these things...") {
-    input "switches", "capability.switch", multiple: true, required: true
-    input "locks", "capability.lock", multiple: true, required: true
-  }
-}
-
-mappings {
-  
-  path("/devices") {
-    action: [
-      GET: "listAllDevices"
-    ]
-  }
-	
-  path("/switches") {
-    action: [
-      GET: "listSwitches"
-    ]
-  }
-  path("/switches/:command") {
-    action: [
-      PUT: "updateSwitches"
-    ]
-  }
-  path("/switches/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-   path("/locks/:command") {
-    action: [
-      PUT: "updateLocks"
-    ]
-  }
-  path("/locks/:id/:command") {
-    action: [
-      PUT: "updateLock"
-    ]
-  }
-  
-   path("/devices/:id/:command") {
-    action: [
-      PUT: "commandDevice"
-    ]
-  }
-}
-
-// returns a list of all devices
-def listAllDevices() {
-   	def resp = []
-   	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
-    }
-    
-    locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
-    }
-    return resp
-}
- 
-// returns a list like
-// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
-def listSwitches() {
-    def resp = []
-    switches.each {
-      resp << [name: it.displayName, value: it.currentValue("switch"), type: "switch", id: it.id]
-    }
-    return resp
-}
-
-void updateLocks() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        locks.each {
-            if (!it.hasCommand(command)) {
-                httpError(501, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        locks."$command"()
-    }
-}
-
-void updateLock() {
-    def command = params.command
-    
-    locks.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all lock specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitch() {
-    def command = params.command
-    
-    switches.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all switches specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void commandDevice() {
-    def command = params.command
-    def devices = []
-    
-    switches.each {
-    	devices << it
-    }
-    
-    locks.each {
-    	devices << it
-    }
-    
-    devices.each {
-        if (it.id == params.id) {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for specified device")
-            }
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitches() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        switches.each {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        switches."$command"()
-    }
-}
-
- def installed() {
-	log.debug "Installed with settings: ${settings}"
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-}

smartapps/engietestcentersmartthings/engietestcentersmartthingssmartapp.src/engietestcentersmartthingssmartapp.groovy

@@ -1,69 +0,0 @@
-/**
- *  EngieTestCenterSmartThingsSmartApp
- *
- *  Copyright 2016 Eric
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "EngieTestCenterSmartThingsSmartApp",
-    namespace: "EngieTestCenterSmartThings",
-    author: "Eric",
-    description: "Test",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-//preferences {
-//	section("Title") {
-//		// TODO: put inputs here
-//	}
-//}
-preferences {
-    section("Turn on when motion detected:") {
-        input "themotion", "capability.motionSensor", required: true, title: "Where?"
-    }
-    section("Turn on when motion detected:") {
-        input "themotion2", "capability.motionSensor", required: true, title: "Where?"
-    }
-    section("Turn on this light") {
-        input "theswitch", "capability.switch", required: true
-    }
-}
-
-//required
-def installed() {
-	//Can settings be queried?
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	//Can settings be queried?
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-//See here for available capabilities - http://docs.smartthings.com/en/latest/capabilities-reference.html#capabilities-taxonomy 
-def initialize() {
-    subscribe(themotion, "motion.active", motionDetectedHandler)
-}
-
-//event handlers ---------------------------
-def motionDetectedHandler(evt) {
-    log.debug "motionDetectedHandler called: $evt"
-    theswitch.on()
-}

smartapps/lock-auto-super-enhanced/enhanced-auto-lock-door.src/enhanced-auto-lock-door.groovy

@@ -13,7 +13,7 @@ preferences{
         input "lock1", "capability.lock", required: true
     }
     section("Select the door contact sensor:") {
-        input "contact", "capability.contactSensor", required: true
+    	input "contact", "capability.contactSensor", required: true
     }   
     section("Automatically lock the door when closed...") {
         input "minutesLater", "number", title: "Delay (in minutes):", required: true
@@ -22,10 +22,9 @@ preferences{
         input "secondsLater", "number", title: "Delay (in seconds):", required: true
     }
     section( "Notifications" ) {
-        input("recipients", "contact", title: "Send notifications to", required: false) {
-            input "phoneNumber", "phone", title: "Warn with text message (optional)", description: "Phone Number", required: false
-        }
-    }
+		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes", "No"]], required: false
+		input "phoneNumber", "phone", title: "Enter phone number to send text notification.", required: false
+	}
 }
 
 def installed(){
@@ -43,73 +42,55 @@ def initialize(){
     subscribe(lock1, "lock", doorHandler, [filterEvents: false])
     subscribe(lock1, "unlock", doorHandler, [filterEvents: false])  
     subscribe(contact, "contact.open", doorHandler)
-    subscribe(contact, "contact.closed", doorHandler)
+	subscribe(contact, "contact.closed", doorHandler)
 }
 
 def lockDoor(){
     log.debug "Locking the door."
     lock1.lock()
-    if(location.contactBookEnabled) {
-        if ( recipients ) {
-            log.debug ( "Sending Push Notification..." ) 
-            sendNotificationToContacts( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!", recipients)
-        }
-    }
-    if (phoneNumber) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!")
-    }
+    log.debug ( "Sending Push Notification..." ) 
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
+    log.debug("Sending text message...")
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
 }
 
 def unlockDoor(){
     log.debug "Unlocking the door."
     lock1.unlock()
-    if(location.contactBookEnabled) {
-        if ( recipients ) {
-            log.debug ( "Sending Push Notification..." ) 
-            sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!", recipients)
-        }
-    }
-    if ( phoneNumber ) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!")
-    }
+    log.debug ( "Sending Push Notification..." ) 
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
+    log.debug("Sending text message...")
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
 }
 
 def doorHandler(evt){
     if ((contact.latestValue("contact") == "open") && (evt.value == "locked")) { // If the door is open and a person locks the door then...  
-        //def delay = (secondsLater) // runIn uses seconds
-        runIn( secondsLater, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
+        def delay = (secondsLater) // runIn uses seconds
+        runIn( delay, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
     }
     else if ((contact.latestValue("contact") == "open") && (evt.value == "unlocked")) { // If the door is open and a person unlocks it then...
         unschedule( unlockDoor ) // ...we don't need to unlock it later.
-    }
+	}
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "locked")) { // If the door is closed and a person manually locks it then...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }   
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "unlocked")) { // If the door is closed and a person unlocks it then...
-       //def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
+        def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "open")) { // If a person opens an unlocked door...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "closed")) { // If a person closes an unlocked door...
-        //def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
-    }
+        def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
+	}
     else { //Opening or Closing door when locked (in case you have a handle lock)
-        log.debug "Unlocking the door."
-        lock1.unlock()
-        if(location.contactBookEnabled) {
-            if ( recipients ) {
-                log.debug ( "Sending Push Notification..." ) 
-                sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!", recipients)
-            }
-        }
-        if ( phoneNumber ) {
-            log.debug("Sending text message...")
-            sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!")
-        }
-    }
+    	log.debug "Unlocking the door."
+		lock1.unlock()
+        log.debug ( "Sending Push Notification..." ) 
+    	if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
+        log.debug("Sending text message...")
+    	if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
+		}
 }