Remove 3axis tile definition from 1st gen multi.

Remove 3axis tile definition as well.

devicetypes/smartthings-users/nest.src/nest.groovy

@@ -1,177 +0,0 @@
-/**
- *  Nest
- *
- *  Copyright 2016 John Lister
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Nest", namespace: "smartthings-users", author: "John Lister") {
-		capability "Polling"
-		capability "Presence Sensor"
-		capability "Relative Humidity Measurement"
-		capability "Sensor"
-		capability "Thermostat"
-
-		attribute "temperatureUnit", "string"
-
-		command "away"
-		command "present"
-		command "setPresence"
-		command "heatingSetpointUp"
-		command "heatingSetpointDown"
-		command "coolingSetpointUp"
-		command "coolingSetpointDown"
-		command "setFahrenheit"
-		command "setCelsius"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'presence' attribute
-	// TODO: handle 'humidity' attribute
-	// TODO: handle 'temperature' attribute
-	// TODO: handle 'heatingSetpoint' attribute
-	// TODO: handle 'coolingSetpoint' attribute
-	// TODO: handle 'thermostatSetpoint' attribute
-	// TODO: handle 'thermostatMode' attribute
-	// TODO: handle 'thermostatFanMode' attribute
-	// TODO: handle 'thermostatOperatingState' attribute
-	// TODO: handle 'schedule' attribute
-	// TODO: handle 'temperatureUnit' attribute
-
-}
-
-// handle commands
-def poll() {
-	log.debug "Executing 'poll'"
-	// TODO: handle 'poll' command
-}
-
-def setHeatingSetpoint() {
-	log.debug "Executing 'setHeatingSetpoint'"
-	// TODO: handle 'setHeatingSetpoint' command
-}
-
-def setCoolingSetpoint() {
-	log.debug "Executing 'setCoolingSetpoint'"
-	// TODO: handle 'setCoolingSetpoint' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def heat() {
-	log.debug "Executing 'heat'"
-	// TODO: handle 'heat' command
-}
-
-def emergencyHeat() {
-	log.debug "Executing 'emergencyHeat'"
-	// TODO: handle 'emergencyHeat' command
-}
-
-def cool() {
-	log.debug "Executing 'cool'"
-	// TODO: handle 'cool' command
-}
-
-def setThermostatMode() {
-	log.debug "Executing 'setThermostatMode'"
-	// TODO: handle 'setThermostatMode' command
-}
-
-def fanOn() {
-	log.debug "Executing 'fanOn'"
-	// TODO: handle 'fanOn' command
-}
-
-def fanAuto() {
-	log.debug "Executing 'fanAuto'"
-	// TODO: handle 'fanAuto' command
-}
-
-def fanCirculate() {
-	log.debug "Executing 'fanCirculate'"
-	// TODO: handle 'fanCirculate' command
-}
-
-def setThermostatFanMode() {
-	log.debug "Executing 'setThermostatFanMode'"
-	// TODO: handle 'setThermostatFanMode' command
-}
-
-def auto() {
-	log.debug "Executing 'auto'"
-	// TODO: handle 'auto' command
-}
-
-def setSchedule() {
-	log.debug "Executing 'setSchedule'"
-	// TODO: handle 'setSchedule' command
-}
-
-def away() {
-	log.debug "Executing 'away'"
-	// TODO: handle 'away' command
-}
-
-def present() {
-	log.debug "Executing 'present'"
-	// TODO: handle 'present' command
-}
-
-def setPresence() {
-	log.debug "Executing 'setPresence'"
-	// TODO: handle 'setPresence' command
-}
-
-def heatingSetpointUp() {
-	log.debug "Executing 'heatingSetpointUp'"
-	// TODO: handle 'heatingSetpointUp' command
-}
-
-def heatingSetpointDown() {
-	log.debug "Executing 'heatingSetpointDown'"
-	// TODO: handle 'heatingSetpointDown' command
-}
-
-def coolingSetpointUp() {
-	log.debug "Executing 'coolingSetpointUp'"
-	// TODO: handle 'coolingSetpointUp' command
-}
-
-def coolingSetpointDown() {
-	log.debug "Executing 'coolingSetpointDown'"
-	// TODO: handle 'coolingSetpointDown' command
-}
-
-def setFahrenheit() {
-	log.debug "Executing 'setFahrenheit'"
-	// TODO: handle 'setFahrenheit' command
-}
-
-def setCelsius() {
-	log.debug "Executing 'setCelsius'"
-	// TODO: handle 'setCelsius' command
-}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -100,9 +100,6 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
@@ -112,7 +109,7 @@ metadata {
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
  }
 
@@ -441,28 +438,28 @@ def configure() {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 		]
 
@@ -481,7 +478,7 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -72,15 +72,12 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -1,7 +1,7 @@
 /**
  *  Initial State Event Streamer
  *
- *  Copyright 2015 David Sulpy
+ *  Copyright 2016 David Sulpy
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -77,6 +77,62 @@ mappings {
 	}
 }
 
+def getAccessKey() {
+	log.trace "get access key"
+	if (atomicState.accessKey == null) {
+		httpError(404, "Access Key Not Found")
+	} else {
+		[
+			accessKey: atomicState.accessKey
+		]
+	}
+}
+
+def getBucketKey() {
+	log.trace "get bucket key"
+	if (atomicState.bucketKey == null) {
+		httpError(404, "Bucket key Not Found")
+	} else {
+		[
+			bucketKey: atomicState.bucketKey,
+			bucketName: atomicState.bucketName
+		]
+	}
+}
+
+def setBucketKey() {
+	log.trace "set bucket key"
+	def newBucketKey = request.JSON?.bucketKey
+	def newBucketName = request.JSON?.bucketName
+
+	log.debug "bucket name: $newBucketName"
+	log.debug "bucket key: $newBucketKey"
+
+	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
+		atomicState.bucketKey = "$newBucketKey"
+		atomicState.bucketName = "$newBucketName"
+		atomicState.isBucketCreated = false
+	}
+
+	tryCreateBucket()
+}
+
+def setAccessKey() {
+	log.trace "set access key"
+	def newAccessKey = request.JSON?.accessKey
+	def newGrokerSubdomain = request.JSON?.grokerSubdomain
+
+	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
+		atomicState.grokerSubdomain = "$newGrokerSubdomain"
+		atomicState.isBucketCreated = false
+	}
+
+	if (newAccessKey && newAccessKey != atomicState.accessKey) {
+		atomicState.accessKey = "$newAccessKey"
+		atomicState.isBucketCreated = false
+	}
+}
+
 def subscribeToEvents() {
 	if (accelerometers != null) {
 		subscribe(accelerometers, "acceleration", genericHandler)
@@ -169,85 +225,27 @@ def subscribeToEvents() {
 	}
 }
 
-def getAccessKey() {
-	log.trace "get access key"
-	if (atomicState.accessKey == null) {
-		httpError(404, "Access Key Not Found")
-	} else {
-		[
-			accessKey: atomicState.accessKey
-		]
-	}
-}
-
-def getBucketKey() {
-	log.trace "get bucket key"
-	if (atomicState.bucketKey == null) {
-		httpError(404, "Bucket key Not Found")
-	} else {
-		[
-			bucketKey: atomicState.bucketKey,
-			bucketName: atomicState.bucketName
-		]
-	}
-}
-
-def setBucketKey() {
-	log.trace "set bucket key"
-	def newBucketKey = request.JSON?.bucketKey
-	def newBucketName = request.JSON?.bucketName
-
-	log.debug "bucket name: $newBucketName"
-	log.debug "bucket key: $newBucketKey"
-
-	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
-		atomicState.bucketKey = "$newBucketKey"
-		atomicState.bucketName = "$newBucketName"
-		atomicState.isBucketCreated = false
-	}
-
-	tryCreateBucket()
-}
-
-def setAccessKey() {
-	log.trace "set access key"
-	def newAccessKey = request.JSON?.accessKey
-	def newGrokerSubdomain = request.JSON?.grokerSubdomain
-
-	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
-		atomicState.grokerSubdomain = "$newGrokerSubdomain"
-		atomicState.isBucketCreated = false
-	}
-
-	if (newAccessKey && newAccessKey != atomicState.accessKey) {
-		atomicState.accessKey = "$newAccessKey"
-		atomicState.isBucketCreated = false
-	}
-}
-
 def installed() {
-	atomicState.version = "1.0.18"
+	atomicState.version = "1.1.0"
+
+	atomicState.isBucketCreated = false
+	atomicState.grokerSubdomain = "groker"
+
 	subscribeToEvents()
 
 	atomicState.isBucketCreated = false
 	atomicState.grokerSubdomain = "groker"
-	atomicState.eventBuffer = []
-
-	runEvery15Minutes(flushBuffer)
 
 	log.debug "installed (version $atomicState.version)"
 }
 
 def updated() {
-	atomicState.version = "1.0.18"
+	atomicState.version = "1.1.0"
 	unsubscribe()
 
 	if (atomicState.bucketKey != null && atomicState.accessKey != null) {
 		atomicState.isBucketCreated = false
 	}
-	if (atomicState.eventBuffer == null) {
-		atomicState.eventBuffer = []
-	}
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		atomicState.grokerSubdomain = "groker"
 	}
@@ -327,37 +325,17 @@ def genericHandler(evt) {
 	eventHandler(key, value)
 }
 
-// This is a handler function for flushing the event buffer
-// after a specified amount of time to reduce the load on ST servers
-def flushBuffer() {
-	def eventBuffer = atomicState.eventBuffer
-	log.trace "About to flush the buffer on schedule"
-	if (eventBuffer != null && eventBuffer.size() > 0) {
-		atomicState.eventBuffer = []
-		tryShipEvents(eventBuffer)
-	}
-}
-
 def eventHandler(name, value) {
 	def epoch = now() / 1000
-	def eventBuffer = atomicState.eventBuffer ?: []
-	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
 
-	if (eventBuffer.size() >= 10) {
-		// Clear eventBuffer right away since we've already pulled it off of atomicState to reduce the risk of missing
-		// events.  This assumes the grokerSubdomain, accessKey, and bucketKey are set correctly to avoid the eventBuffer
-		// from growing unbounded.
-		atomicState.eventBuffer = []
-		tryShipEvents(eventBuffer)
-	} else {
-		// Make sure we persist the updated eventBuffer with the new event added back to atomicState
-		atomicState.eventBuffer = eventBuffer
-	}
-	log.debug "Event added to buffer: " + eventBuffer
+	def event = new JsonSlurper().parseText("{\"key\": \"$name\", \"value\": \"$value\", \"epoch\": \"$epoch\"}")
+
+	tryShipEvents(event)
+	
+	log.debug "Shipped Event: " + event
 }
 
-// a helper function for shipping the atomicState.eventBuffer to Initial State
-def tryShipEvents(eventBuffer) {
+def tryShipEvents(event) {
 
 	def grokerSubdomain = atomicState.grokerSubdomain
 	// can't ship events if there is no grokerSubdomain
@@ -380,7 +358,7 @@ def tryShipEvents(eventBuffer) {
 			"X-IS-AccessKey": "${accessKey}",
 			"Accept-Version": "0.0.2"
 		],
-		body: eventBuffer
+		body: event
 	]
 
 	try {