Remove 3axis tile definition from 1st gen multi.

Remove 3axis tile definition as well.

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -3,7 +3,7 @@
  *
  *	Author: Fidure
  *	Date: 2014-12-13
- *  Updated: 2016-1-29
+ *  Updated: 2015-08-26
  */
 metadata {
 	// Automatically generated. Make future change here.
@@ -207,8 +207,7 @@ def parse(String description) {
 	            case "0000":
 	  						map.name = "temperature"
 	  						map.value = getTemperature(atMap.value)
-								result += createEvent("name":"displayTemperature", "value":
-								getDisplayTemperature(atMap.value))
+								result += createEvent("name":"displayTemperature", "value": getDisplayTemperature(atMap.value))
 	  					break;
 	            case "0005":
 	            //log.debug "hex time: ${descMap.value}"
@@ -228,7 +227,7 @@ def parse(String description) {
 	  					case "0012":
 	  						map.name = "heatingSetpoint"
 	  						map.value = getDisplayTemperature(atMap.value)
-							updateSetpoint(map.name,map.value)
+								updateSetpoint(map.name,map.value)
 	  					break;
 	  					case "001c":
                         	map.name = "thermostatMode"
@@ -299,7 +298,7 @@ def parseDescriptionAsMap(description) {
     def size = Long.parseLong(''+ map.get('size'), 16)
     def index = 12;
     def len
-
+	
     //log.trace "processing multi attributes"
     while((index-12) < size) {
        attrId = flipHexStringEndianness(raw[index..(index+3)])
@@ -314,9 +313,9 @@ def parseDescriptionAsMap(description) {
        list += ['attrId': "$attrId", 'encoding':"$encoding", 'value': "$value"]
     }
   }
-  else
+  else 
     list += ['attrId': "$attrId", 'encoding': "$encoding", 'value': "$value"]
-
+  
   map.remove('value')
   map.remove('encoding')
   map.remove('attrId')
@@ -340,9 +339,8 @@ def getDataLengthByType(t)
 	 "2a":3,	"2b":4,	"2c":5,	"2d":6,	"2e":7,	"2f":8,	"30":1,	"31":2,	"38":2,	"39":4,	"40":8,	"e0":4,	"e1":4,	"e2":4,
 	 "e8":2,	"e9":2,	"ea":4,	"f0":8,	"f1":16]
 
-	// return number of hex chars if the type is not in the map,
-    // then it's likely a malformed msg and should not be parsed
-    return (map.get(t) ?: 256) * 2
+	// return number of hex chars
+	 return map.get(t) * 2
 }
 
 
@@ -379,13 +377,15 @@ def updateSetpoint(attrib, val)
 
 	def value = '--';
 
-	if (("heat"  == mode && heat != null) ||
-    	("auto" == mode && runningMode == "heat" && heat != null))
-        	value = (attrib == "heatingSetpoint")? val : heat;
-	else if (("cool"  == mode && cool != null) || ("auto" == mode && runningMode == "cool" && cool != null))
-    	value = (attrib == "coolingSetpoint")? val : cool;
-
 
+	if ("heat"  == mode && heat != null)
+		value = heat;
+	else if ("cool"  == mode && cool != null)
+		value = cool;
+    else if ("auto" == mode && runningMode == "cool" && cool != null)
+    	value = cool;
+    else if ("auto" == mode && runningMode == "heat" && heat != null)
+    	value = heat;
 
 	sendEvent("name":"displaySetpoint", "value": value)
 }
@@ -565,7 +565,7 @@ def convertToTime(data)
 	def time = Integer.parseInt("$data", 16) as long;
     time *= 1000;
     time += 946684800000; // 481418694
-    time -= location.timeZone.getOffset(date.getTime());
+    time -= location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
 
     def d = new Date(time);
 
@@ -611,14 +611,12 @@ def checkLastTimeSync(delay)
     if (!lastSync)
     	lastSync = "${new Date(0)}"
 
-	if (!settings.sync_clock)
-	{
-		if (lastSync != new Date(0))
-		{
-			sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
-		}
-		return []
-	}
+    if (settings.sync_clock ?: false && lastSync != new Date(0))
+    	{
+        	sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+    	}
+
+
 
 	long duration = (new Date()).getTime() - (new Date(lastSync)).getTime()
 
@@ -651,7 +649,7 @@ def refresh()
 {
 	log.debug "refresh called"
      // log.trace "list: " +       readAttributesCommand(0x201, [0x1C,0x1E,0x23])
-
+      
         readAttributesCommand(0x201, [0x00,0x11,0x12]) +
         readAttributesCommand(0x201, [0x1C,0x1E,0x23]) +
         readAttributesCommand(0x201, [0x24,0x25,0x29]) +
@@ -733,7 +731,7 @@ def setThermostatMode(String next) {
 	def val = (getModeMap().find { it.value == next }?.key)?: "00"
 
 	// log.trace "mode changing to $next sending value: $val"
-
+    
 	sendEvent("name":"thermostatMode", "value":"$next")
 	["st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {$val}"] +
     refresh()
@@ -807,31 +805,32 @@ def lock()
   //log.debug "current lock is: ${val}"
 
   if (val == "00")
-      val = getLockMap().find { it.value == (settings.lock_level ?: "Unlocked") }?.key
+      val = getLockMap().find { it.value == (settings.lock_level ?: "Full") }?.key
   else
       val = "00"
 
-  ["st wattr 0x${device.deviceNetworkId} 1 0x204 1 0x30 {${val}}",
-   "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01", "delay 500"]
+ "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01"
+
 }
 
 
 def setThermostatTime()
 {
 
-  if (false == (settings.sync_clock ?: false))
+  if ((settings.sync_clock ?: false))
     {
       log.debug "sync time is disabled, leaving"
       return []
     }
 
+
   	Date date = new Date();
   	String zone = location.timeZone.getRawOffset() + " DST " + location.timeZone.getDSTSavings();
 
 	long millis = date.getTime(); // Millis since Unix epoch
   	millis -= 946684800000;  // adjust for ZigBee EPOCH
   // adjust for time zone and DST offset
-	millis += location.timeZone.getOffset(date.getTime());
+	millis += location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
 	//convert to seconds
 	millis /= 1000;
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -100,9 +100,6 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
@@ -112,7 +109,7 @@ metadata {
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
  }
 
@@ -441,28 +438,28 @@ def configure() {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 		]
 
@@ -481,7 +478,7 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -72,15 +72,12 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }