MSA-633: Device type for radiators heating control. Could you have a look why response("delay 1200") is not functional when returning it from parse() method? Also example provided in documentation does not work at all. http://docs.smartthings.com/en/latest/device-type-developers-guide/building-z-wave-device-handlers.html#sending-commands-in-response-to-events

devicetypes/encored-technologies/enertalk-energy-meter.src/enertalk-energy-meter.groovy

@@ -1,104 +0,0 @@
-/**
- *  EnerTalk Energy Meter
- *
- *  Copyright 2015 hyeon seok yang
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "EnerTalk Energy Meter", namespace: "Encored Technologies", author: "hyeon seok yang") {
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles(scale:2) {
-    	valueTile("view", "device.view", decoration: "flat") {
-       		state "view", label:' ${currentValue} kWh'
-		}
-		valueTile("month", "device.month", width: 6, height : 3, decoration: "flat") {
-       		state "month", label:' ${currentValue}'
-		}
-        valueTile("real", "device.real", width: 2, height : 2, decoration: "flat") {
-       		state "real", label:' ${currentValue}'
-		}
-        valueTile("tier", "device.tier", width: 2, height : 2, decoration: "flat") {
-       		state "tier", label:' ${currentValue}'
-		}
-        valueTile("plan", "device.plan", width: 2, height : 2, decoration: "flat") {
-       		state "plan", label:' ${currentValue}'
-		}
-        
-        htmlTile(name:"deepLink", action:"linkApp", whitelist:["code.jquery.com", 
-    	"ajax.googleapis.com", 
-        "fonts.googleapis.com",
-    	"code.highcharts.com", 
-    	"enertalk-card.encoredtech.com", 
-    	"s3-ap-northeast-1.amazonaws.com",
-        "s3.amazonaws.com", 
-    	"ui-hub.encoredtech.com",
-        "enertalk-auth.encoredtech.com",
-        "api.encoredtech.com",
-        "cdnjs.cloudflare.com",
-        "encoredtech.com",
-        "itunes.apple.com"], width:2, height:2){}
-        
-        main (["view"])
-        details (["month", "real", "tier", "plan", "deepLink"])
-	}
-}
-
-mappings {
-	
-      path("/linkApp") {action: [ GET: "getLinkedApp" ]}
-}
-
-def getLinkedApp() {
-	def lang = clientLocale?.language
-    if ("${lang}" == "ko") {
-    	lang = "<p style=\'margin-left:15vw; color: #aeaeb0;\'>기기 설정</p>"
-    } else {
-    	lang = "<p style=\'margin-left:5vw; color: #aeaeb0;\'>Setup Device</p>"
-    }
-	renderHTML() {
-        head {
-           """
-			<meta name="viewport" content="initial-scale=1, maximum-scale=1, user-scalable=no, width=device-width, height=device-height">
-           	<style>
-            	#레이어_1 { margin-left : 17vw; width : 50vw; height : 50vw;}
-                .st0{fill:#B5B6BB;}
-            </style>
-        """ 
-        }
-        body {
-        """
-            <div id="container">
-            	<a id="st-deep-link" href="#">
-                	<svg version="1.1" id="레이어_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px" viewBox="0 0 40 40" style="enable-background:new 0 0 40 40;" xml:space="preserve"><path class="st0" d="M20,0C9,0,0,9,0,20C0,30.5,8,39,18.2,40l3.8-4.8l-3.9-4.8c-4.9-0.9-8.6-5.2-8.6-10.4c0-5.8,4.7-10.5,10.5-10.5
-					S30.5,14.2,30.5,20c0,5.1-3.7,9.4-8.5,10.3l3.7,4.5L21.8,40C32,39.1,40,30.5,40,20C40,9,31,0,20,0z"/></svg>
-                </a>
-                ${lang} 
-            </div>
-            <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js"></script>
-            <script>
-           		var ua = navigator.userAgent.toLowerCase();
-                var isAndroid = ua.indexOf("android") > -1;
-                if(!isAndroid) { 
-                	\$("#st-deep-link").attr("href", "https://itunes.apple.com/kr/app/enertalk-for-home/id1024660780?mt=8");
-                } else {
-                	\$("#st-deep-link").attr("href", "market://details?id=com.ionicframework.enertalkhome874425");
-                }
-            </script>
-        """
-        }
-	}
-}

devicetypes/eurotronic/eurotronic-zwave-thermostatic-valve.src/eurotronic-zwave-thermostatic-valve.groovy

@@ -0,0 +1,300 @@
+/**
+ *  Copyright 2015 Eurotronic
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "Eurotronic Z-Wave Thermostatic Valve", namespace: "Eurotronic", author: "Eurotronic") {
+		capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+        capability "Thermostat Setpoint"
+		capability "Sensor"
+        capability "Switch Level"
+        
+		command "energySave"
+        command "manual"
+        command "setWakeUpInterval", ["number"]
+        command "setEnergySavingSetpoint", ["number"]
+        
+        attribute "energySavingSetpoint", "number"
+
+		fingerprint deviceId:"0x0806", inClusters:"0x43, 0x40, 0x31, 0x20, 0x26, 0x77, 0x80, 0x84, 0x72, 0x86"
+    }
+    
+	tiles(scale: 1) {
+    	
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("a", label:'${currentValue}°', icon: "st.Weather.weather2",
+				backgroundColors:[
+					[value: 0, color: "#153591"],
+					[value: 7, color: "#1e9cbb"],
+					[value: 15, color: "#90d2a7"],
+					[value: 23, color: "#44b621"],
+					[value: 29, color: "#f1d801"],
+					[value: 35, color: "#d04e00"],
+				]
+			)
+		}
+		standardTile("mode", "device.thermostatMode") {
+			state("off", label:'${name}', action:"heat", nextState:"heat", backgroundColor:"#808080", icon:"st.Seasonal Fall.seasonal-fall-008")
+			state("heat", label:'${name}', action:"energySave", nextState:"energy save", backgroundColor:"#fdd470", icon:"st.Seasonal Winter.seasonal-winter-009")
+			state("energy save", label:'save', action:"manual", nextState:"manual", backgroundColor:"#afd574", icon:"st.Transportation.transportation1")
+            state("manual", label: '${name}', action:"off", nextState:"off", backgroundColor:"#8f00ff", icon:"st.Outdoor.outdoor18")
+		}
+        valueTile("battery", "device.battery",  width: 1, height: 1) {
+        	state ("battery", label:'${currentValue}%', unit:"%", icon: "st.Health & Wellness.health9",
+            	backgroundColors:[
+					[value: 0, color: "#ce1010"],
+					[value: 50, color: "#3535ba"],
+					[value: 100, color: "#0d740d"]
+				]
+            )
+    	}
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state "a", action:"setHeatingSetpoint", backgroundColor:"#fdd470"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint") {
+			state ("a", label:'${currentValue}°', backgroundColor:"#fdd470")
+		}
+        controlTile("energySavingControl", "device.energySavingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state ("a", action:"setEnergySavingSetpoint", backgroundColor:"#afd574")
+		}
+		valueTile("energySavingSetpoint", "device.energySavingSetpoint" ) {
+			state ("a", label:'${currentValue}°', backgroundColor:"#afd574")
+		}
+        controlTile("switchControlSlider", "device.switch", "slider", height: 1, width: 2) {
+			state ("a", action:"setLevel", backgroundColor: "#8f00ff")
+		}
+		valueTile("switchValue", "device.switch") {
+			state ("a", label:'${currentValue}%', backgroundColor:"#8f00ff")
+		}
+        
+		main "temperature"
+		details(["temperature", "mode", "battery", "heatSliderControl", "heatingSetpoint", "energySavingControl", "energySavingSetpoint", "switchControlSlider", "switchValue"])
+	}
+}
+
+def parse(String description)
+{
+	log.debug "Parse description: $description"
+    
+    def result = []
+    
+    if (state.wakeUpInterval != 240 || state.nodeid != zwaveHubNodeId) {
+    	result << response(zwave.wakeUpV2.wakeUpIntervalSet(nodeid: zwaveHubNodeId, seconds: 240))
+        result << response(zwave.wakeUpV2.wakeUpIntervalGet().format())
+    }
+    
+    def zwe = []
+    
+    if (description != "updated") {
+    	zwe = zwaveEvent(zwave.parse(description, [0x20: 1, 0x26: 3, 0x31: 4, 0x40: 2, 0x43: 2, 0x77: 1, 0x80: 1, 0x84: 2, 0x72: 1, 0x86: 1]))    	
+   	}
+    
+    return result + zwe
+}
+
+// Multilevel Switch
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd){
+	log.debug "Switch multilevel get $cmd"
+    
+    if (cmd.value == 255)
+    	cmd.value = 100
+    
+    return createEvent(name: "switch", value: cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStartLevelChange cmd){
+	log.debug "SwitchMultilevelStartLevelChange notification $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd){
+	log.debug "SwitchMultilevelStopLevelChange notification $cmd"
+}
+
+//Multilevel Sensor
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv4.SensorMultilevelReport cmd){
+	log.debug "Sensor multilevel get $cmd"
+    def map = [:]
+	if (cmd.sensorType == 1) {
+		map.value = cmd.scaledSensorValue
+		map.unit = cmd.scale
+		map.name = "temperature"
+    }
+    return createEvent(map)
+}
+
+//Thermostat
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd){
+	log.debug "Thermostat mode notification $cmd"
+    def map = [:]
+	switch (cmd.mode) {
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
+			map.value = "off"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+			map.value = "heat"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_ENERGY_SAVE_HEAT:
+			map.value = "energy save"
+			break
+		case 0x1F:
+			map.value = "manual"
+			break
+	}
+	map.name = "thermostatMode"
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd){
+	log.debug "ThermostatSetpointReport notification $cmd"
+    
+	def map = [:]
+	map.value = cmd.scaledValue
+	map.unit = cmd.scale
+	switch (cmd.setpointType) {
+		case 1:
+			map.name = "heatingSetpoint"
+			break;
+		case 11:
+			map.name = "energySavingSetpoint"
+			break;
+		default:
+			return [:]
+	}
+	// So we can respond with same format
+	state.size = cmd.size
+	state.scale = cmd.scale
+	state.precision = cmd.precision
+	return createEvent(map)
+}
+
+//Battery
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd){
+	log.debug "Battery notification $cmd"
+    return createEvent(name: "battery", value: cmd.batteryLevel)
+}
+
+//Wake up
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpIntervalReport cmd){
+	log.debug "WakeUpInterval notification $cmd"
+    state.nodeid = cmd.nodeid
+    state.wakeUpInterval = cmd.seconds
+    return createEvent(name: "wakeUpIntervalSeconds", value: cmd.seconds)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd){
+	log.debug "Wake up notification $cmd $state"
+    def result = []
+    
+    if (state.modeCommand) {
+    	result << response(state.modeCommand)
+        result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+        state.modeCommand = null
+    }
+    
+    if (state.setLevelCommand) {
+    	result << response(state.setLevelCommand)
+    	result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+        state.setLevelCommand = null
+    }
+    
+    if (state.setHeatingSetpointCommand) {
+    	result << response(state.setHeatingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    	state.setHeatingSetpointCommand = null
+    }
+    
+    if (state.setEnergySavingSetpointCommand) {
+    	result << response(state.setEnergySavingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    	state.setEnergySavingSetpointCommand = null
+    }
+    
+    //For some reason response("delay 1200") is not functional which is really bad because hub is 
+    //not able to request all the information from device which it needs. All the commands are
+    //sent at the same time. 
+    result << response(zwave.sensorMultilevelV4.sensorMultilevelGet().format())
+    result << response(zwave.batteryV1.batteryGet().format())
+    result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    //result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+    result << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+    result
+}
+
+//Unexpected
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.warn "Unexpected zwave command $cmd"
+}
+
+// Command Implementations
+def off() {
+	log.debug "Thermostat mode setting to off"
+	state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 0).format()
+}
+
+def heat() {
+	log.debug "Thermostat mode setting to heat"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 1).format()
+}
+
+def energySave() {
+	log.debug "Thermostat mode setting to energy save"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 11).format()
+}
+
+def manual() {
+	log.debug "Thermostat mode setting to manual"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 31).format()
+}
+
+def setLevel(double lvl){    
+    //by Eurotronic specification 100% is 0xFF and 99% is 0x63
+    if (lvl == 100.0)
+    	lvl = 255
+    
+    log.debug "Changing switch level to $lvl"
+
+    state.setLevelCommand = zwave.switchMultilevelV3.switchMultilevelSet(value: 256).format()
+}
+
+def setHeatingSetpoint(double sp){
+	log.debug "Setting setpoint to $sp"
+    
+	def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	1,
+        size:			2,
+   	]
+    	
+    state.setHeatingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}
+
+def setEnergySavingSetpoint(double sp){
+	log.debug "Setting energy saving setpoint to $sp"
+    
+    def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	11,
+        size:			2,
+   	]
+    	
+    state.setEnergySavingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -1,9 +1,12 @@
-// keen home smart vent
-// http://www.keenhome.io
-// SmartThings Device Handler v1.0.0
+/**
+ *  Keen Home Smart Vent
+ *
+ *  Author: Keen Home
+ *  Date: 2015-06-23
+ */
 
 metadata {
-    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Keen Home") {
+    definition (name: "Keen Home Smart Vent", namespace: "Keen Home", author: "Gregg Altschul") {
         capability "Switch Level"
         capability "Switch"
         capability "Configuration"
@@ -18,7 +21,6 @@ metadata {
         command "getBattery"
         command "getTemperature"
         command "setZigBeeIdTile"
-        command "clearObstruction"
 
         fingerprint endpoint: "1",
         profileId: "0104",
@@ -40,10 +42,9 @@ metadata {
     // UI tile definitions
     tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
-            state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
+            state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
+            state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
+            state "obstructed", action: "switch.off", icon:"st.vents.vent-closed", backgroundColor:"#ff0000"
         }
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
             state "level", action:"switch level.setLevel"
@@ -205,12 +206,12 @@ private Map makeOnOffResult(rawValue) {
 
 private Map makeLevelResult(rawValue) {
     def linkText = getLinkText(device)
+    // log.debug "rawValue: ${rawValue}"
     def value = Integer.parseInt(rawValue, 16)
     def rangeMax = 254
 
-    // catch obstruction level
     if (value == 255) {
-        log.debug "${linkText} is obstructed"
+        log.debug "obstructed"
         // Just return here. Once the vent is power cycled
         // it will go back to the previous level before obstruction.
         // Therefore, no need to update level on the display.
@@ -219,9 +220,24 @@ private Map makeLevelResult(rawValue) {
             value: "obstructed",
             descriptionText: "${linkText} is obstructed. Please power cycle."
         ]
+    } else if ( device.currentValue("switch") == "obstructed" &&
+                value == 254)  {
+        // When the device is reset after an obstruction, the switch
+        // state will be obstructed and the value coming from the device
+        // will be 254. Since we're not using heating/cooling mode from
+        // the device type handler, we need to bump it down to the lower
+        // (cooling) range
+        sendEvent(makeOnOffResult(1)) // clear the obstructed switch state
+        value = rangeMax
     }
+    // else if (device.currentValue("switch") == "off") {
+    //     sendEvent(makeOnOffResult(1)) // turn back on if in off state
+    // }
 
+
+    // log.debug "pre-value: ${value}"
     value = Math.floor(value / rangeMax * 100)
+    // log.debug "post-value: ${value}"
 
     return [
         name: "level",
@@ -311,79 +327,35 @@ private def makeSerialResult(serial) {
         value: serial,
         descriptionText: "${linkText} has serial ${serial}" ]
 }
-
-// takes a level from 0 to 100 and translates it to a ZigBee move to level with on/off command
-private def makeLevelCommand(level) {
-    def rangeMax = 254
-    def scaledLevel = Math.round(level * rangeMax / 100)
-    log.debug "scaled level for ${level}%: ${scaledLevel}"
-
-    // convert to hex string and pad to two digits
-    def hexLevel = new BigInteger(scaledLevel.toString()).toString(16).padLeft(2, '0')
-
-    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${hexLevel} 0000}"
-}
-
 /**** COMMAND METHODS ****/
+// def mfgCode() {
+// 	 ["zcl mfg-code 0x115B", "delay 200"]
+// }
+
 def on() {
-    def linkText = getLinkText(device)
-    log.debug "open ${linkText}"
-
-    // only change the state if the vent is not obstructed
-    if (device.currentValue("switch") == "obstructed") {
-        log.error("cannot open because ${linkText} is obstructed")
-        return
-    }
-
+    log.debug "on()"
     sendEvent(makeOnOffResult(1))
     "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
 }
 
 def off() {
-    def linkText = getLinkText(device)
-    log.debug "close ${linkText}"
-
-    // only change the state if the vent is not obstructed
-    if (device.currentValue("switch") == "obstructed") {
-        log.error("cannot close because ${linkText} is obstructed")
-        return
-    }
-
+    log.debug "off()"
     sendEvent(makeOnOffResult(0))
     "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
 }
 
-def clearObstruction() {
-    def linkText = getLinkText(device)
-    log.debug "attempting to clear ${linkText} obstruction"
+// does this work?
+def toggle() {
+    log.debug "toggle()"
 
-    sendEvent([
-        name: "switch",
-        value: "clearing",
-        descriptionText: "${linkText} is clearing obstruction"
-    ])
-
-    // send a move command to ensure level attribute gets reset for old, buggy firmware
-    // then send a reset to factory defaults
-    // finally re-configure to ensure reports and binding is still properly set after the rtfd
-    [
-        makeLevelCommand(device.currentValue("level")), "delay 500",
-        "st cmd 0x${device.deviceNetworkId} 1 0 0 {}", "delay 5000"
-    ] + configure()
+    "st cmd 0x${device.deviceNetworkId} 1 6 2 {}"
 }
 
 def setLevel(value) {
     log.debug "setting level: ${value}"
+
     def linkText = getLinkText(device)
 
-    // only change the level if the vent is not obstructed
-    def currentState = device.currentValue("switch")
-
-    if (currentState == "obstructed") {
-        log.error("cannot set level because ${linkText} is obstructed")
-        return
-    }
-
     sendEvent(name: "level", value: value)
     if (value > 0) {
         sendEvent(name: "switch", value: "on", descriptionText: "${linkText} is on by setting a level")
@@ -391,26 +363,29 @@ def setLevel(value) {
     else {
         sendEvent(name: "switch", value: "off", descriptionText: "${linkText} is off by setting level to 0")
     }
+    def rangeMax = 254
+    def computedLevel = Math.round(value * rangeMax / 100)
+    log.debug "computedLevel: ${computedLevel}"
 
-    makeLevelCommand(value)
+    def level = new BigInteger(computedLevel.toString()).toString(16)
+    log.debug "level: ${level}"
+
+    if (level.size() < 2){
+        level = '0' + level
+    }
+
+    "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 0000}"
 }
 
+
 def getOnOff() {
     log.debug "getOnOff()"
 
-    // disallow on/off updates while vent is obstructed
-    if (device.currentValue("switch") == "obstructed") {
-        log.error("cannot update open/close status because ${getLinkText(device)} is obstructed")
-        return []
-    }
-
     ["st rattr 0x${device.deviceNetworkId} 1 0x0006 0"]
 }
 
 def getPressure() {
     log.debug "getPressure()"
-
-    // using a Keen Home specific attribute in the pressure measurement cluster
     [
         "zcl mfg-code 0x115B", "delay 200",
         "zcl global read 0x0403 0x20", "delay 200",
@@ -420,13 +395,12 @@ def getPressure() {
 
 def getLevel() {
     log.debug "getLevel()"
-
-    // disallow level updates while vent is obstructed
-    if (device.currentValue("switch") == "obstructed") {
-        log.error("cannot update level status because ${getLinkText(device)} is obstructed")
-        return []
-    }
-
+    // rattr = read attribute
+    // 0x${} = device net id
+    // 1 = endpoint
+    // 8 = cluster id (level control, in this case)
+    // 0 = attribute within cluster
+    // sendEvent(name: "level", value: value)
     ["st rattr 0x${device.deviceNetworkId} 1 0x0008 0x0000"]
 }
 
@@ -451,59 +425,78 @@ def setZigBeeIdTile() {
         name: "zigbeeId",
         value: device.zigbeeId,
         descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ])
-    return [
+	return [
         name: "zigbeeId",
         value: device.zigbeeId,
         descriptionText: "${linkText} has zigbeeId ${device.zigbeeId}" ]
 }
 
 def refresh() {
-    getOnOff() +
+	getOnOff() +
     getLevel() +
     getTemperature() +
     getPressure() +
     getBattery()
 }
 
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
 def configure() {
     log.debug "CONFIGURE"
+    log.debug "zigbeeId: ${device.hub.zigbeeId}"
 
-    // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()
 
     def configCmds = [
-        // bind reporting clusters to hub
+        // binding commands
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500"
-
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0001 {${device.zigbeeId}} {}", "delay 500",
+        
         // configure report commands
-        // zcl global send-me-a-report [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
+        // [cluster] [attr] [type] [min-interval] [max-interval] [min-change]
 
-        // report with these parameters is preconfigured in firmware, can be overridden here
+        // mike 2015/06/22: preconfigured; see tech spec
         // vent on/off state - type: boolean, change: 1
         // "zcl global send-me-a-report 6 0 0x10 5 60 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // report with these parameters is preconfigured in firmware, can be overridden here
+        // mike 2015/06/22: preconfigured; see tech spec
         // vent level - type: int8u, change: 1
         // "zcl global send-me-a-report 8 0 0x20 5 60 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // report with these parameters is preconfigured in firmware, can be overridden here
+        // mike 2015/06/22: temp and pressure reports are preconfigured, but
+        //   we'd like to override their settings for our own purposes
         // temperature - type: int16s, change: 0xA = 10 = 0.1C
-        // "zcl global send-me-a-report 0x0402 0 0x29 60 60 {0A00}", "delay 200",
-        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+        "zcl global send-me-a-report 0x0402 0 0x29 10 60 {0A00}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        // report with these parameters is preconfigured in firmware, can be overridden here
-        // keen home custom pressure (tenths of Pascals) - type: int32u, change: 1 = 0.1Pa
-        // "zcl mfg-code 0x115B", "delay 200",
-        // "zcl global send-me-a-report 0x0403 0x20 0x22 60 60 {010000}", "delay 200",
-        // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+        // mike 2015/06/22: use new custom pressure attribute
+        // pressure - type: int32u, change: 1 = 0.1Pa
+        "zcl mfg-code 0x115B", "delay 200",
+        "zcl global send-me-a-report 0x0403 0x20 0x22 10 60 {010000}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500"
 
-        // report with these parameters is preconfigured in firmware, can be overridden here
+        // mike 2015/06/22: preconfigured; see tech spec
         // battery - type: int8u, change: 1
         // "zcl global send-me-a-report 1 0x21 0x20 60 3600 {01}", "delay 200",
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -1,163 +0,0 @@
-/**
- *  PlantLink
- *
- *  This device type takes sensor data and converts it into a json packet to send to myplantlink.com
- *  where its values will be computed for soil and plant type to show user readable values of how your
- *  specific plant is doing.
- *
- *
- *  Copyright 2015 Oso Technologies
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- 
-import groovy.json.JsonBuilder
-
-metadata {
-    definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
-        capability "Sensor"
-
-        command "setStatusIcon"
-        command "setPlantFuelLevel"
-        command "setBatteryLevel"
-        command "setInstallSmartApp"
-
-        attribute "plantStatus","string"
-        attribute "plantFuelLevel","number"
-        attribute "linkBatteryLevel","string"
-        attribute "installSmartApp","string"
-
-        fingerprint profileId: "0104", inClusters: "0000,0001,0B04"
-    }
-
-    simulator {
-        status "battery": "read attr - raw: C0720100010A000021340A, dni: C072, endpoint: 01, cluster: 0001, size: 0A, attrId: 0000, encoding: 21, value: 0a34"
-        status "moisture": "read attr - raw: C072010B040A0001290000, dni: C072, endpoint: 01, cluster: 0B04, size: 0A, attrId: 0100, encoding: 29, value: 0000"
-    }
-
-    tiles {
-        standardTile("Title", "device.label") {
-            state("label", label:'PlantLink ${device.label}')
-        }
-
-        valueTile("plantMoistureTile", "device.plantFuelLevel", width: 1, height: 1) {
-            state("plantMoisture", label: '${currentValue}% Moisture')
-        }
-
-        valueTile("plantStatusTextTile", "device.plantStatus", decoration: "flat", width: 2, height: 2) {
-            state("plantStatusTextTile", label:'${currentValue}')
-        }
-
-        valueTile("battery", "device.linkBatteryLevel" ) {
-            state("battery", label:'${currentValue}% battery')
-        }
-        
-        valueTile("installSmartApp","device.installSmartApp", decoration: "flat", width: 3, height: 1) {
-        	state "needSmartApp", label:'Please install SmartApp "Required PlantLink Connector"', defaultState:true
-            state "connectedToSmartApp", label:'Connected to myplantlink.com'
-        }
-
-        main "plantStatusTextTile"
-        details(['plantStatusTextTile', "plantMoistureTile", "battery", "installSmartApp"])
-    }
-}
-
-def setStatusIcon(value){
-    def status = ''
-    switch (value) {
-    	case '0':
-	        status = 'Needs Water'
-            break
-    	case '1':
-        	status = 'Dry'
-            break
-    	case '2':
-   		case '3':
-        	status = 'Good'
-            break
-        case '4':
-        	status = 'Too Wet'
-            break
-    	case 'No Soil':
-        	status = 'Too Dry'
-        	setPlantFuelLevel(0)
-            break
-    	case 'Recently Watered':
-        	status = 'Watered'
-            setPlantFuelLevel(100)
-    		break
-    	case 'Low Battery':
-        	status = 'Low Battery'
-    		break
-    	case 'Waiting on First Measurement':
-	        status = 'Calibrating'
-            break
-    	default:
-        	status = "?"
-            break
-    }
-    sendEvent("name":"plantStatus", "value":status, "description":statusText, displayed: true, isStateChange: true)
-}
-
-def setPlantFuelLevel(value){
-    sendEvent("name":"plantFuelLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)	
-}
-
-def setBatteryLevel(value){
-    sendEvent("name":"linkBatteryLevel", "value":value, "description":statusText, displayed: true, isStateChange: true)
-}
-
-def setInstallSmartApp(value){
-	sendEvent("name":"installSmartApp", "value":value)
-}
-
-def parse(String description) {
-
-	def description_map = parseDescriptionAsMap(description)
-    def event_name = ""
-    def measurement_map = [
-            type: "link",
-            signal: "0x00",
-            zigbeedeviceid: device.zigbeeId,
-            created: new Date().time /1000 as int
-    ]
-    if (description_map.cluster == "0000"){
-    	/* version number, not used */
-        
-    } else if (description_map.cluster == "0001"){
-        /* battery voltage in mV (device needs minimium 2.1v to run) */
-        log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
-        event_name = "battery_status"
-        measurement_map["battery"] = "0x${description_map.value}"
-        
-    } else if (description_map.cluster == "0B04"){
-        /* raw moisture reading (needs to be sent to plantlink for soil/plant type conversion) */
-        log.debug "PlantLink - id ${device.zigbeeId}  raw moisture ${description_map.value}"
-        measurement_map["moisture"] = "0x${description_map.value}"
-        event_name = "moisture_status"
-        
-    } else{
-        log.debug "PlantLink - id ${device.zigbeeId} Unknown '${description}'"
-        return
-    }
-    
-    def json_builder = new JsonBuilder(measurement_map)
-    def result = createEvent(name: event_name, value: json_builder.toString())
-    return result
-}
-
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) { map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -24,8 +24,6 @@ metadata {
 		capability "Battery"
 
 		attribute "tamper", "enum", ["detected", "clear"]
-		attribute "batteryStatus", "string"
-		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 	}
@@ -65,19 +63,6 @@ metadata {
 		status "wake up" : "command: 8407, payload: "
 	}
 
-	preferences {
-		input description: "Please consult AEOTEC MULTISENSOR 6 operating manual for advanced setting options. You can skip this configuration to use default settings",
-				title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
-
-		input "motionDelayTime", "enum", title: "Motion Sensor Delay Time",
-				options: ["20 seconds", "40 seconds", "1 minute", "2 minutes", "3 minutes", "4 minutes"], defaultValue: "${motionDelayTime}", displayDuringSetup: true
-
-		input "motionSensitivity", "enum", title: "Motion Sensor Sensitivity", options: ["normal","maximum","minimum"], defaultValue: "${motionSensitivity}", displayDuringSetup: true
-
-		input "reportInterval", "enum", title: "Sensors Report Interval",
-				options: ["8 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${reportInterval}", displayDuringSetup: true
-	}
-
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
@@ -100,78 +85,53 @@ metadata {
 		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
-
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
-
-		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
-			state "ultravioletIndex", label:'${currentValue} UV index', unit:""
-		}
-
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
-		valueTile("batteryStatus", "device.batteryStatus", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "batteryStatus", label:'${currentValue}', unit:""
-		}
-
-		valueTile("powerSupply", "device.powerSupply", height: 2, width: 2, decoration: "flat") {
-			state "powerSupply", label:'${currentValue} powered', backgroundColor:"#ffffff"
-		}
-
-		main(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex"])
-		details(["motion", "temperature", "humidity", "illuminance", "ultravioletIndex", "batteryStatus"])
+		main(["motion", "temperature", "humidity", "illuminance"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery"])
 	}
 }
 
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
-
-	if (device.latestValue("powerSupply") == "USB Cable") {  //case1: USB powered
+def updated()
+{
+	if (state.sec && !isConfigured()) {
+		// in case we miss the SCSR
 		response(configure())
-	} else if (device.latestValue("powerSupply") == "Battery") {  //case2: battery powered
-		// setConfigured("false") is used by WakeUpNotification
-		setConfigured("false") //wait until the next time device wakeup to send configure command after user change preference
-	} else { //case3: power source is not identified, ask user to properly pair the sensor again
-		log.warn "power source is not identified, check it sensor is powered by USB, if so > configure()"
-		def request = []
-		request << zwave.configurationV1.configurationGet(parameterNumber: 101)
-		response(commands(request))
 	}
 }
 
-def parse(String description) {
-	log.debug "parse() >> description: $description"
+def parse(String description)
+{
 	def result = null
 	if (description.startsWith("Err 106")) {
-		log.debug "parse() >> Err 106"
+		state.sec = 0
 		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
 	} else if (description != "updated") {
-		log.debug "parse() >> zwave.parse(description)"
 		def cmd = zwave.parse(description, [0x31: 5, 0x30: 2, 0x84: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
 	}
-	log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
+	log.debug "Parsed '${description}' to ${result.inspect()}"
 	return result
 }
 
-//this notification will be sent only when device is battery powered
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
-	def cmds = []
+
 	if (!isConfigured()) {
+		// we're still in the process of configuring a newly joined device
 		log.debug("late configure")
-		result << response(configure())
+		result += response(configure())
 	} else {
-		log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-		result << response(cmds)
+		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
 	result
 }
@@ -189,29 +149,10 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-	log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
-	state.sec = 1
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
-	state.sec = 1
-	log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
-	def result = [createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true)]
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.info "Executing zwaveEvent 72 (ManufacturerSpecificV2) : 05 (ManufacturerSpecificReport) with cmd: $cmd"
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
+	response(configure())
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
@@ -221,14 +162,11 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 		map.value = cmd.batteryLevel
 	}
 	state.lastbatt = now()
-	result << createEvent(map)
-	if (device.latestValue("powerSupply") != "USB Cable"){
-		result << createEvent(name: "batteryStatus", value: "${map.value} % battery", displayed: false)
-	}
-	result
+	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
+{
 	def map = [:]
 	switch (cmd.sensorType) {
 		case 1:
@@ -270,6 +208,7 @@ def motionEvent(value) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	setConfigured()
 	motionEvent(cmd.sensorValue)
 }
 
@@ -286,112 +225,47 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 				result << createEvent(name: "tamper", value: "clear", displayed: false)
 				break
 			case 3:
-				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was tampered")
+				result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName was moved")
 				break
 			case 7:
 				result << motionEvent(1)
 				break
 		}
 	} else {
-		log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
 		result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
 	}
 	result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-	log.debug "ConfigurationReport: $cmd"
-	def result = []
-	def value
-	if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 0) {
-		value = "USB Cable"
-		if (!isConfigured()) {
-			log.debug("ConfigurationReport: configuring device")
-			result << response(configure())
-		}
-		result << createEvent(name: "batteryStatus", value: value, displayed: false)
-		result << createEvent(name: "powerSupply", value: value, displayed: false)
-	}else if (cmd.parameterNumber == 9 && cmd.configurationValue[0] == 1) {
-		value = "Battery"
-		result << createEvent(name: "powerSupply", value: value, displayed: false)
-	} else if (cmd.parameterNumber == 101){
-		result << response(configure())
-	}
-	result
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "General zwaveEvent cmd: ${cmd}"
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
-	log.debug "${device.displayName} is configuring its settings"
-	def request = []
+	if (device.device.rawDescription =~ /98/ && !state.sec) {
+		log.debug "Multi 6 not sending configure until secure"
+		return []
+	}
+	log.debug "Multi 6 configure()"
+	def request = [
+		// send no-motion report 20 seconds after motion stops
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 20),
 
-	//1. set association groups for hub
-	request << zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId)
+		// report every 8 minutes (threshold reports don't work on battery power)
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
 
-	request << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId)
-
-	//2. automatic report flags
-	// param 101 -103 [4 bytes] 128: light sensor, 64 humidity, 32 temperature sensor, 2 ultraviolet sensor, 1 battery sensor -> send command 227 to get all reports
-	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 226) //association group 1
-
-	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1) //association group 2
-
-	//3. no-motion report x seconds after motion stops (default 20 secs)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: timeOptionValueMap[motionDelayTime] ?: 20)
-
-	//4. motionSensitivity 3 levels: 64-normal (default), 127-maximum, 0-minimum
-	request << zwave.configurationV1.configurationSet(parameterNumber: 6, size: 1,
-			scaledConfigurationValue:
-					motionSensitivity == "normal" ? 64 :
-							motionSensitivity == "maximum" ? 127 :
-									motionSensitivity == "minimum" ? 0 : 64)
-
-	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
-
-	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
-
-	//6. report automatically on threshold change
-	request << zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1)
-
-	//7. query sensor data
-	request << zwave.batteryV1.batteryGet()
-	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x1B) //ultravioletIndex
-
-	setConfigured("true")
+		// report automatically on threshold change
+		zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: 1),
 
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C),
+    ]
 	commands(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
-private def getTimeOptionValueMap() { [
-		"20 seconds" : 20,
-		"40 seconds" : 40,
-		"1 minute"   : 60,
-		"2 minutes"  : 2*60,
-		"3 minutes"  : 3*60,
-		"4 minutes"  : 4*60,
-		"5 minutes"  : 5*60,
-		"8 minutes"  : 8*60,
-		"15 minutes" : 15*60,
-		"30 minutes" : 30*60,
-		"1 hours"    : 1*60*60,
-		"6 hours"    : 6*60*60,
-		"12 hours"   : 12*60*60,
-		"18 hours"   : 6*60*60,
-		"24 hours"   : 24*60*60,
-]}
-
-private setConfigured(configure) {
-	updateDataValue("configured", configure)
+private setConfigured() {
+	updateDataValue("configured", "true")
 }
 
 private isConfigured() {
@@ -407,6 +281,5 @@ private command(physicalgraph.zwave.Command cmd) {
 }
 
 private commands(commands, delay=200) {
-	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
 }

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,161 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-    definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
-        capability "Tone"
-        capability "Actuator"
-        capability "Presence Sensor"
-        capability "Sensor"
-        capability "Battery"
-        capability "Configuration"
-
-        fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
-                        manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
-    }
-
-    preferences {
-        section {
-            image(name: 'educationalcontent', multiple: true, images: [
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival1.png",
-                "http://cdn.device-gse.smartthings.com/Arrival/Arrival2.png"
-                ])
-        }
-        section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)",
-                    defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        }
-    }
-
-    tiles {
-        standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-        standardTile("beep", "device.beep", decoration: "flat") {
-            state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-        }
-        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-
-        main "presence"
-        details(["presence", "beep", "battery"])
-    }
-}
-
-def updated() {
-    startTimer()
-}
-
-def configure() {
-    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
-    log.debug "configure -- cmds: ${cmds}"
-    return cmds
-}
-
-def beep() {
-    log.debug "Sending Identify command to beep the sensor for 5 seconds"
-    return zigbee.command(0x0003, 0x00, "0500")
-}
-
-def parse(String description) {
-    state.lastCheckin = now()
-    handlePresenceEvent(true)
-
-    if (description?.startsWith('read attr -')) {
-        handleReportAttributeMessage(description)
-    }
-
-    return []
-}
-
-private handleReportAttributeMessage(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-
-    if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
-        handleBatteryEvent(Integer.parseInt(descMap.value, 16))
-    }
-}
-
-/**
- * Create battery event from reported battery voltage.
- *
- * @param volts Battery voltage in .1V increments
- */
-private handleBatteryEvent(volts) {
-    if (volts == 0 || volts == 255) {
-        log.debug "Ignoring invalid value for voltage (${volts/10}V)"
-    }
-    else {
-        def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-                          22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-        def minVolts = 15
-        def maxVolts = 28
-
-        if (volts < minVolts)
-            volts = minVolts
-        else if (volts > maxVolts)
-            volts = maxVolts
-        def pct = batteryMap[volts]
-        if (pct != null) {
-            def linkText = getLinkText(device)
-            def eventMap = [
-                name: 'battery',
-                value: pct,
-                descriptionText: "${linkText} battery was ${pct}%"
-            ]
-            log.debug "Creating battery event for voltage=${volts/10}V: ${eventMap}"
-            sendEvent(eventMap)
-        }
-    }
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        log.debug "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        log.debug "Sensor is not present"
-        stopTimer()
-    }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    log.debug "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    log.debug "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    log.debug "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    log.debug "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
-    }
-}

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -15,7 +15,6 @@
  *	Author: SmartThings
  *	Date: 2013-12-04
  */
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 metadata {
 	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
@@ -26,6 +25,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B04,0B05", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -38,63 +38,168 @@ metadata {
 	}
 
 	// UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		
+
+		main(["switch"])
+		details(["switch", "level", "levelSliderControl", "refresh"])
+	}
 }
 
 // Parse incoming device messages to generate events
+
 def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
+	log.trace description
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace msg
+		log.trace "data: $msg.data"
+        
+        if(description?.endsWith("0100") ||description?.endsWith("1001"))
+        {
+        	def result = createEvent(name: "switch", value: "on")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
         }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
+        
+        if(description?.endsWith("0000") || description?.endsWith("1000"))
+        {
+        	def result = createEvent(name: "switch", value: "off")
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result
         }
+	}
+    
+    
+   if (description?.startsWith("read attr")) {
+   		
+        log.debug description[-2..-1]
+        def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
+        
+		sendEvent( name: "level", value: i )
     }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off()
+    
+	
 }
 
 def on() {
-    zigbee.on()
-}
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+    
+    "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+    }
 
-def setLevel(value) {
-    zigbee.setLevel(value)
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+    
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+ 
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
+    // Schedule poll every 1 min
+    //schedule("0 */1 * * * ?", poll)
+    //poll()
+    
+    [
+	"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+    "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0"
+    ]
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {0000 0000}"
+	}
+	else if (device.latestValue("switch") == "off") {
+		sendEvent(name: "switch", value: "on")
+	}
+
+	sendEvent(name: "level", value: value)
+    def level = hex(value * 255/100)
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+	//log.debug cmds
+	cmds
 }
 
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+
+	log.debug "Configuring Reporting and Bindings."
+	def configCmds = [	
+  
+        //Switch Reporting
+        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1000",
+        
+        //Level Control Reporting
+        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
+        "send 0x${device.deviceNetworkId} ${endpointId} 1", "delay 1500",
+        
+        "zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 6 {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 8 {${device.zigbeeId}} {}", "delay 500",
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def uninstalled() {
+
+	log.debug "uninstalled()"
+		
+	response("zcl rftd")
+ 
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -1,71 +0,0 @@
-/**
- *  Ecobee Sensor
- *
- *  Copyright 2015 Juan Risso
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Sensor"
-		capability "Temperature Measurement"
-		capability "Motion Sensor"
-		capability "Refresh"
-		capability "Polling"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 31, color: "#153591"],
-							[value: 44, color: "#1e9cbb"],
-							[value: 59, color: "#90d2a7"],
-							[value: 74, color: "#44b621"],
-							[value: 84, color: "#f1d801"],
-							[value: 95, color: "#d04e00"],
-							[value: 96, color: "#bc2323"]
-					]
-			)
-		}
-
-		standardTile("motion", "device.motion") {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-		}
-
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main (["temperature","motion"])
-		details(["temperature","motion","refresh"])
-	}
-}
-
-def refresh() {
-	log.debug "refresh..."
-	poll()
-}
-
-void poll() {
-	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChildren(this)
-}
-
-//generate custom mobile activity feeds event
-def generateActivityFeedsEvent(notificationMessage) {
-	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
-}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -22,31 +22,31 @@ metadata {
 		capability "Polling"
 		capability "Sensor"
         capability "Refresh"
-
+        
         command "generateEvent"
         command "raiseSetpoint"
         command "lowerSetpoint"
         command "resumeProgram"
         command "switchMode"
-
+        
         attribute "thermostatSetpoint","number"
         attribute "thermostatStatus","string"
 	}
 
 	simulator { }
-
-    	tiles {
+ 
+		tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-                backgroundColors:[
-                    [value: 31, color: "#153591"],
-                    [value: 44, color: "#1e9cbb"],
-                    [value: 59, color: "#90d2a7"],
-                    [value: 74, color: "#44b621"],
-                    [value: 84, color: "#f1d801"],
-                    [value: 95, color: "#d04e00"],
-                    [value: 96, color: "#bc2323"]
-                ]
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
@@ -54,27 +54,27 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
-			state "updating", label:"Working", icon: "st.secondary.secondary"
+			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"  
+            state "updating", label:"Working", icon: "st.secondary.secondary"  
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
 			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"           
 			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
-		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
+        standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", action:"raiseSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+        valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
 			state "thermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
-		}
+		}    
 		standardTile("downButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", action:"lowerSetpoint", icon:"st.thermostat.thermostat-down"
-		}
+			state "setpoint", action:"lowerSetpoint", backgroundColor:"#d04e00", icon:"st.thermostat.thermostat-down"
+		}        
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
@@ -91,196 +91,218 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
-			state "updating", label:"Working", icon: "st.secondary.secondary"
+			state "resume", label:'Resume Program', action:"device.resumeProgram", icon:"st.sonos.play-icon"
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
-	}
-
-	preferences {
-		input "holdType", "enum", title: "Hold Type", description: "When changing temperature, use Temporary (Until next transition) or Permanent hold (default)", required: false, options:["Temporary", "Permanent"]
+        details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
 	}
 
 }
 
+/*
+    
+    preferences {
+		input "highTemperature", "number", title: "Auto Mode High Temperature:", defaultValue: 80
+		input "lowTemperature", "number", title: "Auto Mode Low Temperature:", defaultValue: 70
+        input name: "holdType", type: "enum", title: "Hold Type", description: "When changing temperature, use Temporary or Permanent hold", required: true, options:["Temporary", "Permanent"]
+  	}
+    
+*/
+
+
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	// TODO: handle '' attribute
-
+ 
 }
 
-def refresh() {
-	log.debug "refresh called"
-	poll()
-	log.debug "refresh ended"
+def refresh()
+{
+  log.debug "refresh called"
+  poll()
+  log.debug "refresh ended"
 }
-
+ 
+def go()
+{
+  log.debug "before:go tile tapped"
+  poll()
+  log.debug "after"
+}
+ 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-
+	
 	def results = parent.pollChild(this)
-	generateEvent(results) //parse received message from parent
+	parseEventData(results)
+	generateStatusEvent()
 }
-
-def generateEvent(Map results) {
+ 
+def parseEventData(Map results)
+{
 	log.debug "parsing data $results"
-	if(results) {
-		results.each { name, value ->
-
+	if(results)
+	{
+		results.each { name, value -> 
+ 
 			def linkText = getLinkText(device)
-			def isChange = false
-			def isDisplayed = true
-			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
-			handlerName: name]
-
-			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
-				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
+            def isChange = false
+            def isDisplayed = true
+            
+            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
 				isChange = isTemperatureStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
-			} else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
-			}  else {
-				isChange = isStateChange(device, name, value.toString())
-				isDisplayed = isChange
-				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
-			}
-			sendEvent(event)
+                isDisplayed = isChange
+                   
+				sendEvent(
+					name: name,
+					value: value,
+					unit: "F",
+					linkText: linkText,
+					descriptionText: getThermostatDescriptionText(name, value, linkText),
+					handlerName: name,
+					isStateChange: isChange,
+					displayed: isDisplayed)
+                    
+            }
+            else {
+            	isChange = isStateChange(device, name, value.toString())
+                isDisplayed = isChange
+                
+                sendEvent(
+					name: name,
+					value: value.toString(),
+					linkText: linkText,
+					descriptionText: getThermostatDescriptionText(name, value, linkText),
+					handlerName: name,
+					isStateChange: isChange,
+					displayed: isDisplayed)
+                    
+            }
+		}                                   									
+		generateSetpointEvent ()  
+        generateStatusEvent ()
+	}
+}
+
+void generateEvent(Map results)
+{
+	log.debug "parsing data $results"
+	if(results)
+	{
+		results.each { name, value -> 
+        
+ 			def linkText = getLinkText(device)
+            def isChange = false
+            def isDisplayed = true
+            
+            if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+				isChange = isTemperatureStateChange(device, name, value.toString())
+                isDisplayed = isChange
+                   
+				sendEvent(
+					name: name,
+					value: value,
+					unit: "F",
+					linkText: linkText,
+					descriptionText: getThermostatDescriptionText(name, value, linkText),
+					handlerName: name,
+					isStateChange: isChange,
+					displayed: isDisplayed)                                    									 
+            }
+            else {
+            	isChange = isStateChange(device, name, value.toString())
+                isDisplayed = isChange
+                
+                sendEvent(
+					name: name,
+					value: value.toString(),
+					linkText: linkText,
+					descriptionText: getThermostatDescriptionText(name, value, linkText),
+					handlerName: name,
+					isStateChange: isChange,
+					displayed: isDisplayed)
+                    
+            }
 		}
-		generateSetpointEvent ()
-		generateStatusEvent ()
+		generateSetpointEvent () 
+        generateStatusEvent()
 	}
 }
-
-//return descriptionText to be shown on mobile activity feed
-private getThermostatDescriptionText(name, value, linkText) {
-	if(name == "temperature") {
-		return "$linkText temperature is $value°F"
-
-	} else if(name == "heatingSetpoint") {
-		return "heating setpoint is $value°F"
-
-	} else if(name == "coolingSetpoint"){
-		return "cooling setpoint is $value°F"
-
-	} else if (name == "thermostatMode") {
-		return "thermostat mode is ${value}"
-
-	} else if (name == "thermostatFanMode") {
-		return "thermostat fan mode is ${value}"
-
-	} else {
-		return "${name} = ${value}"
+ 
+private getThermostatDescriptionText(name, value, linkText)
+{
+	if(name == "temperature")
+	{
+		return "$linkText was $value°F"
 	}
+	else if(name == "heatingSetpoint")
+	{
+		return "latest heating setpoint was $value°F"
+	}
+	else if(name == "coolingSetpoint")
+	{
+		return "latest cooling setpoint was $value°F"
+	}
+    else if (name == "thermostatMode")
+    {
+        return "thermostat mode is ${value}"
+    }
+    else
+    {
+        return "${name} = ${value}"
+    }
 }
 
-void setHeatingSetpoint(setpoint) {
-	setHeatingSetpoint(setpoint.toDouble())
+
+void setHeatingSetpoint(degreesF) {
+	setHeatingSetpoint(degreesF.toDouble())
 }
 
-void setHeatingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = setpoint
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	//enforce limits of heatingSetpoint
-	if (heatingSetpoint > 79) {
-		heatingSetpoint = 79
-	} else if (heatingSetpoint < 45) {
-		heatingSetpoint = 45
-	}
-
-	//enforce limits of heatingSetpoint vs coolingSetpoint
-	if (heatingSetpoint >= coolingSetpoint) {
-		coolingSetpoint = heatingSetpoint
-	}
-
-	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
-		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
-		generateSetpointEvent()
-		generateStatusEvent()
-	} else {
-		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
-	}
+void setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint({$degreesF})"
+	sendEvent("name":"heatingSetpoint", "value":degreesF)
+	Double coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "coolingSetpoint: $coolingSetpoint"
+	parent.setHold(this, degreesF, coolingSetpoint)
 }
 
-void setCoolingSetpoint(setpoint) {
-	setCoolingSetpoint(setpoint.toDouble())
+void setCoolingSetpoint(degreesF) {
+	setCoolingSetpoint(degreesF.toDouble())
 }
 
-void setCoolingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
-	def coolingSetpoint = setpoint
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	if (coolingSetpoint > 92) {
-		coolingSetpoint = 92
-	} else if (coolingSetpoint < 65) {
-		coolingSetpoint = 65
-	}
-
-	//enforce limits of heatingSetpoint vs coolingSetpoint
-	if (heatingSetpoint >= coolingSetpoint) {
-		heatingSetpoint = coolingSetpoint
-	}
-
-	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
-		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
-		generateSetpointEvent()
-		generateStatusEvent()
-	} else {
-		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
-	}
+void setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint({$degreesF})"
+	sendEvent("name":"coolingSetpoint", "value":degreesF)
+	Double heatingSetpoint = device.currentValue("heatingSetpoint")
+	parent.setHold(this, heatingSetpoint, degreesF)
 }
 
-void resumeProgram() {
-
-	log.debug "resumeProgram() is called"
-	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.resumeProgram(this, deviceId)) {
-		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
-		runIn(5, "poll")
-		log.debug "resumeProgram() is done"
-		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
-	} else {
-		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
-		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
-	}
+def configure() {
+	
+}
 
+def resumeProgram() {
+	parent.resumeProgram(this)
 }
 
 def modes() {
 	if (state.modes) {
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
-	else {
-		state.modes = parent.availableModes(this)
-		log.debug "Modes = ${state.modes}"
-		return state.modes
-	}
+        log.debug "Modes = ${state.modes}"
+    	return state.modes
+    }
+    else {
+    	state.modes = parent.availableModes(this)
+        log.debug "Modes = ${state.modes}"        
+        return state.modes
+    }
 }
 
 def fanModes() {
 	["off", "on", "auto", "circulate"]
 }
 
+
 def switchMode() {
 	log.debug "in switchMode"
 	def currentMode = device.currentState("thermostatMode")?.value
@@ -292,7 +314,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	log.debug "In switchToMode = ${nextMode}"
+    log.debug "In switchToMode = ${nextMode}"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
 		"$nextMode"()
@@ -354,326 +376,300 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
-
+	
 }
 
 def setThermostatFanMode(String value) {
 
 	log.debug "setThermostatFanMode({$value})"
-
+	
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
+
+   sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true, isStateChange: true)
+
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true)
+
+   sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true, isStateChange: true)
+
 }
 
 def generateOperatingStateEvent(operatingState) {
-	sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true)
+
+   sendEvent(name: "thermostatOperatingState", value: operatingState, descriptionText: "$device.displayName is ${operatingState}", displayed: true, isStateChange: true)
+
 }
 
 def off() {
 	log.debug "off"
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"off", deviceId))
-		generateModeEvent("off")
-	else {
-		log.debug "Error setting new mode."
-		def currentMode = device.currentState("thermostatMode")?.value
-		generateModeEvent(currentMode) // reset the tile back
-	}
-	generateSetpointEvent()
-	generateStatusEvent()
+	generateModeEvent("off")     
+    if (parent.setMode (this,"off"))
+        generateModeEvent("off")
+    else {
+       	log.debug "Error setting new mode." 
+    	def currentMode = device.currentState("thermostatMode")?.value
+        generateModeEvent(currentMode) // reset the tile back
+    }
+    generateSetpointEvent()
+    generateStatusEvent()   
+	
 }
 
 def heat() {
 	log.debug "heat"
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"heat", deviceId))
-		generateModeEvent("heat")
-	else {
-		log.debug "Error setting new mode."
-		def currentMode = device.currentState("thermostatMode")?.value
-		generateModeEvent(currentMode) // reset the tile back
-	}
-	generateSetpointEvent()
-	generateStatusEvent()
+	generateModeEvent("heat")    
+    if (parent.setMode (this,"heat"))
+        generateModeEvent("heat")
+    else {
+       	log.debug "Error setting new mode." 
+    	def currentMode = device.currentState("thermostatMode")?.value
+        generateModeEvent(currentMode) // reset the tile back
+    }
+    generateSetpointEvent()    
+    generateStatusEvent()   
 }
 
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auxHeatOnly", deviceId))
-		generateModeEvent("auxHeatOnly")
-	else {
-		log.debug "Error setting new mode."
-		def currentMode = device.currentState("thermostatMode")?.value
-		generateModeEvent(currentMode) // reset the tile back
-	}
-	generateSetpointEvent()
-	generateStatusEvent()
+    generateModeEvent("auxHeatOnly")    
+    if (parent.setMode (this,"auxHeatOnly"))
+        generateModeEvent("auxHeatOnly")
+    else {
+       	log.debug "Error setting new mode." 
+    	def currentMode = device.currentState("thermostatMode")?.value
+        generateModeEvent(currentMode) // reset the tile back
+    }
+    generateSetpointEvent()    
+    generateStatusEvent()  
 }
 
 def cool() {
 	log.debug "cool"
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"cool", deviceId))
-		generateModeEvent("cool")
-	else {
-		log.debug "Error setting new mode."
-		def currentMode = device.currentState("thermostatMode")?.value
-		generateModeEvent(currentMode) // reset the tile back
-	}
-	generateSetpointEvent()
-	generateStatusEvent()
+    generateModeEvent("cool")
+    if (parent.setMode (this,"cool"))
+        generateModeEvent("cool")
+    else {
+       	log.debug "Error setting new mode." 
+    	def currentMode = device.currentState("thermostatMode")?.value
+        generateModeEvent(currentMode) // reset the tile back
+    }
+    generateSetpointEvent()    
+    generateStatusEvent()   
 }
 
 def auto() {
 	log.debug "auto"
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auto", deviceId))
-		generateModeEvent("auto")
-	else {
-		log.debug "Error setting new mode."
-		def currentMode = device.currentState("thermostatMode")?.value
-		generateModeEvent(currentMode) // reset the tile back
-	}
-	generateSetpointEvent()
-	generateStatusEvent()
+    generateModeEvent("auto")
+    if (parent.setMode (this,"auto"))
+        generateModeEvent("auto")
+    else {
+       	log.debug "Error setting new mode." 
+    	def currentMode = device.currentState("thermostatMode")?.value
+        generateModeEvent(currentMode) // reset the tile back
+    }
+    generateSetpointEvent()    
+    generateStatusEvent()  
 }
 
 def fanOn() {
 	log.debug "fanOn"
-//    parent.setFanMode (this,"on")
-
+    parent.setFanMode (this,"on")
+	
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-//    parent.setFanMode (this,"auto")
-
+   	parent.setFanMode (this,"auto")    
+	
 }
 
 def fanCirculate() {
 	log.debug "fanCirculate"
-//    parent.setFanMode (this,"circulate")
-
+    parent.setFanMode (this,"circulate")
+	
 }
 
 def fanOff() {
 	log.debug "fanOff"
-//    parent.setFanMode (this,"off")
-
+    parent.setFanMode (this,"off")
+	
 }
 
 def generateSetpointEvent() {
 
-	log.debug "Generate SetPoint Event"
+   	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
-	log.debug "Current Mode = ${mode}"
+    log.debug "Current Mode = ${mode}" 
 
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
+    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+    log.debug "Heating Setpoint = ${heatingSetpoint}"
 
 	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+    log.debug "Cooling Setpoint = ${coolingSetpoint}"
+    
+    if (mode == "heat") {
+        
+        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")                       
+        
+    }
+    else if (mode == "cool") {
+        
+        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")     
 
-	if (mode == "heat") {
+    } else if (mode == "auto") {
+        
+        sendEvent("name":"thermostatSetpoint", "value":"Auto")
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+    } else if (mode == "off") {
+            
+        sendEvent("name":"thermostatSetpoint", "value":"Off")    
 
-	}
-	else if (mode == "cool") {
+    } else if (mode == "emergencyHeat") {
+        
+        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")           
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
-
-	} else if (mode == "auto") {
-
-		sendEvent("name":"thermostatSetpoint", "value":"Auto")
-
-	} else if (mode == "off") {
-
-		sendEvent("name":"thermostatSetpoint", "value":"Off")
-
-	} else if (mode == "emergencyHeat") {
-
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
-
-	}
+    }
 
 }
 
 void raiseSetpoint() {
+
+   	log.debug "Raise SetPoint"
+    
 	def mode = device.currentValue("thermostatMode")
-	def targetvalue
+    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+    
+    log.debug "Current Mode = ${mode}"
+    
+    if (mode == "heat") {
+        
+        heatingSetpoint++
+        
+        if (heatingSetpoint > 99)
+           heatingSetpoint = 99
+        
+        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
+        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)               
+        
+        parent.setHold (this, heatingSetpoint, coolingSetpoint)
+        
+        log.debug "New Heating Setpoint = ${heatingSetpoint}"
+        
+    }
+    else if (mode == "cool") {
+                
+        coolingSetpoint++
+        
+        if (coolingSetpoint > 99)
+            coolingSetpoint = 99
+        
+        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
+        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)       
+        
+        parent.setHold (this, heatingSetpoint, coolingSetpoint)
+        
+        log.debug "New Cooling Setpoint = ${coolingSetpoint}"        
+        
+    }
+    generateStatusEvent()
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow raiseSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
-		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
-		} else {
-			targetvalue = 0
-		}
-		targetvalue = targetvalue + 1
-
-		if (mode == "heat" && targetvalue > 79) {
-			targetvalue = 79
-		} else if (mode == "cool" && targetvalue > 92) {
-			targetvalue = 92
-		}
-
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
-		log.info "In mode $mode raiseSetpoint() to $targetvalue"
-
-		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
-	}
 }
 
-//called by tile when user hit raise temperature button on UI
+
 void lowerSetpoint() {
+   	log.debug "Lower SetPoint"
+    
 	def mode = device.currentValue("thermostatMode")
-	def targetvalue
+    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+    
+    log.debug "Current Mode = ${mode}, Current Heating Setpoint = ${heatingSetpoint}, Current Cooling Setpoint = ${coolingSetpoint}"
+    
+    if (mode == "heat" || mode == "emergencyHeat") {
+        
+        heatingSetpoint--  
+        
+        if (heatingSetpoint < 32)
+           heatingSetpoint = 32
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow lowerSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
-		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
-		} else {
-			targetvalue = 0
-		}
-		targetvalue = targetvalue - 1
-
-		if (mode == "heat" && targetvalue.toInteger() < 45) {
-			targetvalue = 45
-		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
-			targetvalue = 65
-		}
-
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
-		log.info "In mode $mode lowerSetpoint() to $targetvalue"
-
-		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
-	}
-}
-
-//called by raiseSetpoint() and lowerSetpoint()
-void alterSetpoint(temp) {
-
-	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	def targetHeatingSetpoint
-	def targetCoolingSetpoint
-
-	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat"){
-		if (temp.value > coolingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = coolingSetpoint
-		}
-	} else if (mode == "cool") {
-		//enforce limits before sending request to cloud
-		if (temp.value < heatingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = heatingSetpoint
-			targetCoolingSetpoint = temp.value
-		}
-	}
-
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
-			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	//step2: call parent.setHold to send http request to 3rd party cloud
-	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
-		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
-	} else {
-		log.error "Error alterSetpoint()"
-		if (mode == "heat"){
-			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-		} else if (mode == "cool") {
-			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-		}
-	}
-	generateStatusEvent()
+        sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString()+"°")        
+        sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+        
+        parent.setHold (this, heatingSetpoint, coolingSetpoint)
+        
+        log.debug "New Heating Setpoint = ${heatingSetpoint}"
+        
+    }
+    else if (mode == "cool") {
+                
+        coolingSetpoint--
+        
+        if (coolingSetpoint < 32)
+           coolingSetpoint = 32
+        
+        sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString()+"°")
+        sendEvent("name":"coolingSetpoint", "value":coolingSetpoint) 
+        
+        parent.setHold (this, heatingSetpoint, coolingSetpoint)
+        
+        log.debug "New Cooling Setpoint = ${coolingSetpoint}"
+        
+    }
+    generateStatusEvent()
 }
 
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-	def temperature = device.currentValue("temperature").toInteger()
-
-	def statusText
-
-	log.debug "Generate Status Event for Mode = ${mode}"
-	log.debug "Temperature = ${temperature}"
-	log.debug "Heating set point = ${heatingSetpoint}"
-	log.debug "Cooling set point = ${coolingSetpoint}"
-	log.debug "HVAC Mode = ${mode}"
-
-	if (mode == "heat") {
-
-		if (temperature >= heatingSetpoint)
-			statusText = "Right Now: Idle"
-		else
-			statusText = "Heating to ${heatingSetpoint}° F"
-
-	} else if (mode == "cool") {
-
-		if (temperature <= coolingSetpoint)
-			statusText = "Right Now: Idle"
-		else
-			statusText = "Cooling to ${coolingSetpoint}° F"
-
-	} else if (mode == "auto") {
-
-		statusText = "Right Now: Auto"
-
-	} else if (mode == "off") {
-
-		statusText = "Right Now: Off"
-
-	} else if (mode == "emergencyHeat") {
-
-		statusText = "Emergency Heat"
-
-	} else {
-
-		statusText = "?"
-
-	}
-	log.debug "Generate Status Event = ${statusText}"
-	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
+    def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+    def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()   
+    def temperature = device.currentValue("temperature").toInteger()  
+    
+    def statusText
+    
+    log.debug "Generate Status Event for Mode = ${mode}"
+    log.debug "Temperature = ${temperature}"
+    log.debug "Heating set point = ${heatingSetpoint}"
+    log.debug "Cooling set point = ${coolingSetpoint}"
+    log.debug "HVAC Mode = ${mode}"
+    
+    if (mode == "heat") {
+    
+    	if (temperature >= heatingSetpoint)
+        	statusText = "Right Now: Idle"
+        else
+    		statusText = "Heating to ${heatingSetpoint}° F"
+        
+    } else if (mode == "cool") {
+    
+        if (temperature <= coolingSetpoint)
+        	statusText = "Right Now: Idle"
+        else
+    		statusText = "Cooling to ${coolingSetpoint}° F"
+        
+    } else if (mode == "auto") {
+        
+    	statusText = "Right Now: Auto"
+        
+    } else if (mode == "off") {
+    
+    	statusText = "Right Now: Off"
+        
+    } else if (mode == "emergencyHeat") {
+    
+    	statusText = "Emergency Heat"
+        
+    } else {
+    
+        statusText = "?"
+        
+    }
+    log.debug "Generate Status Event = ${statusText}"
+    sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true, isStateChange: true)
 }
 
-//generate custom mobile activity feeds event
-def generateActivityFeedsEvent(notificationMessage) {
-	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
-}

devicetypes/smartthings/fidure-thermostat.src/fidure-thermostat.groovy

@@ -3,7 +3,7 @@
  *
  *	Author: Fidure
  *	Date: 2014-12-13
- *  Updated: 2016-1-29
+ *  Updated: 2015-08-26
  */
 metadata {
 	// Automatically generated. Make future change here.
@@ -207,8 +207,7 @@ def parse(String description) {
 	            case "0000":
 	  						map.name = "temperature"
 	  						map.value = getTemperature(atMap.value)
-								result += createEvent("name":"displayTemperature", "value":
-								getDisplayTemperature(atMap.value))
+								result += createEvent("name":"displayTemperature", "value": getDisplayTemperature(atMap.value))
 	  					break;
 	            case "0005":
 	            //log.debug "hex time: ${descMap.value}"
@@ -228,7 +227,7 @@ def parse(String description) {
 	  					case "0012":
 	  						map.name = "heatingSetpoint"
 	  						map.value = getDisplayTemperature(atMap.value)
-							updateSetpoint(map.name,map.value)
+								updateSetpoint(map.name,map.value)
 	  					break;
 	  					case "001c":
                         	map.name = "thermostatMode"
@@ -299,7 +298,7 @@ def parseDescriptionAsMap(description) {
     def size = Long.parseLong(''+ map.get('size'), 16)
     def index = 12;
     def len
-
+	
     //log.trace "processing multi attributes"
     while((index-12) < size) {
        attrId = flipHexStringEndianness(raw[index..(index+3)])
@@ -314,9 +313,9 @@ def parseDescriptionAsMap(description) {
        list += ['attrId': "$attrId", 'encoding':"$encoding", 'value': "$value"]
     }
   }
-  else
+  else 
     list += ['attrId': "$attrId", 'encoding': "$encoding", 'value': "$value"]
-
+  
   map.remove('value')
   map.remove('encoding')
   map.remove('attrId')
@@ -340,9 +339,8 @@ def getDataLengthByType(t)
 	 "2a":3,	"2b":4,	"2c":5,	"2d":6,	"2e":7,	"2f":8,	"30":1,	"31":2,	"38":2,	"39":4,	"40":8,	"e0":4,	"e1":4,	"e2":4,
 	 "e8":2,	"e9":2,	"ea":4,	"f0":8,	"f1":16]
 
-	// return number of hex chars if the type is not in the map,
-    // then it's likely a malformed msg and should not be parsed
-    return (map.get(t) ?: 256) * 2
+	// return number of hex chars
+	 return map.get(t) * 2
 }
 
 
@@ -379,13 +377,15 @@ def updateSetpoint(attrib, val)
 
 	def value = '--';
 
-	if (("heat"  == mode && heat != null) ||
-    	("auto" == mode && runningMode == "heat" && heat != null))
-        	value = (attrib == "heatingSetpoint")? val : heat;
-	else if (("cool"  == mode && cool != null) || ("auto" == mode && runningMode == "cool" && cool != null))
-    	value = (attrib == "coolingSetpoint")? val : cool;
-
 
+	if ("heat"  == mode && heat != null)
+		value = heat;
+	else if ("cool"  == mode && cool != null)
+		value = cool;
+    else if ("auto" == mode && runningMode == "cool" && cool != null)
+    	value = cool;
+    else if ("auto" == mode && runningMode == "heat" && heat != null)
+    	value = heat;
 
 	sendEvent("name":"displaySetpoint", "value": value)
 }
@@ -565,7 +565,7 @@ def convertToTime(data)
 	def time = Integer.parseInt("$data", 16) as long;
     time *= 1000;
     time += 946684800000; // 481418694
-    time -= location.timeZone.getOffset(date.getTime());
+    time -= location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
 
     def d = new Date(time);
 
@@ -611,14 +611,12 @@ def checkLastTimeSync(delay)
     if (!lastSync)
     	lastSync = "${new Date(0)}"
 
-	if (!settings.sync_clock)
-	{
-		if (lastSync != new Date(0))
-		{
-			sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
-		}
-		return []
-	}
+    if (settings.sync_clock ?: false && lastSync != new Date(0))
+    	{
+        	sendEvent("name":"lastTimeSync", "value":"${new Date(0)}")
+    	}
+
+
 
 	long duration = (new Date()).getTime() - (new Date(lastSync)).getTime()
 
@@ -651,7 +649,7 @@ def refresh()
 {
 	log.debug "refresh called"
      // log.trace "list: " +       readAttributesCommand(0x201, [0x1C,0x1E,0x23])
-
+      
         readAttributesCommand(0x201, [0x00,0x11,0x12]) +
         readAttributesCommand(0x201, [0x1C,0x1E,0x23]) +
         readAttributesCommand(0x201, [0x24,0x25,0x29]) +
@@ -733,7 +731,7 @@ def setThermostatMode(String next) {
 	def val = (getModeMap().find { it.value == next }?.key)?: "00"
 
 	// log.trace "mode changing to $next sending value: $val"
-
+    
 	sendEvent("name":"thermostatMode", "value":"$next")
 	["st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {$val}"] +
     refresh()
@@ -807,31 +805,32 @@ def lock()
   //log.debug "current lock is: ${val}"
 
   if (val == "00")
-      val = getLockMap().find { it.value == (settings.lock_level ?: "Unlocked") }?.key
+      val = getLockMap().find { it.value == (settings.lock_level ?: "Full") }?.key
   else
       val = "00"
 
-  ["st wattr 0x${device.deviceNetworkId} 1 0x204 1 0x30 {${val}}",
-   "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01", "delay 500"]
+ "st rattr 0x${device.deviceNetworkId} 1 0x204 0x01"
+
 }
 
 
 def setThermostatTime()
 {
 
-  if (false == (settings.sync_clock ?: false))
+  if ((settings.sync_clock ?: false))
     {
       log.debug "sync time is disabled, leaving"
       return []
     }
 
+
   	Date date = new Date();
   	String zone = location.timeZone.getRawOffset() + " DST " + location.timeZone.getDSTSavings();
 
 	long millis = date.getTime(); // Millis since Unix epoch
   	millis -= 946684800000;  // adjust for ZigBee EPOCH
   // adjust for time zone and DST offset
-	millis += location.timeZone.getOffset(date.getTime());
+	millis += location.timeZone.getRawOffset() + location.timeZone.getDSTSavings();
 	//convert to seconds
 	millis /= 1000;
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 		capability "Switch Level"
         capability "Polling"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -26,6 +26,8 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45852"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45857"
 	}
 
 	// simulator metadata

devicetypes/smartthings/ge-zigbee-switch.src/ge-zigbee-switch.groovy

@@ -26,6 +26,8 @@ metadata {
 		capability "Actuator"
 		capability "Sensor"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "0003, 000A,0019", manufacturer: "Jasco Products", model: "45853"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B05,0702", outClusters: "000A,0019", manufacturer: "Jasco Products", model: "45856"
 	}
 
 	// simulator metadata

devicetypes/smartthings/gentle-wake-up-controller.src/gentle-wake-up-controller.groovy

@@ -1,126 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-    definition (name: "Gentle Wake Up Controller", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch"
-        capability "Timed Session"
-
-        attribute "percentComplete", "number"
-
-        command "setPercentComplete", ["number"]
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles(scale: 2) {
-
-        multiAttributeTile(name: "richTile", type:"generic", width:6, height:4) {
-            tileAttribute("sessionStatus", key: "PRIMARY_CONTROL") {
-                attributeState "cancelled", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "running"
-                attributeState "stopped", action: "timed session.start", icon: "http://f.cl.ly/items/322n181j2K3f281r2s0A/playbutton.png", backgroundColor: "#ffffff", nextState: "cancelled"
-                attributeState "running", action: "timed session.stop", icon: "http://f.cl.ly/items/0B3y3p2V3X2l3P3y3W09/stopbutton.png", backgroundColor: "#79b821", nextState: "cancelled"
-            }
-            tileAttribute("timeRemaining", key: "SECONDARY_CONTROL") {
-                attributeState "timeRemaining", label:'${currentValue} remaining'
-            }
-            tileAttribute("percentComplete", key: "SLIDER_CONTROL") {
-                attributeState "percentComplete", action: "timed session.setTimeRemaining"
-            }
-        }
-
-        // start/stop
-        standardTile("sessionStatusTile", "sessionStatus", width: 1, height: 1, canChangeIcon: true) {
-            state "cancelled", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
-            state "stopped", label: "Stopped", action: "timed session.start", backgroundColor: "#ffffff", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
-            state "running", label: "Running", action: "timed session.stop", backgroundColor: "#79b821", icon: "http://f.cl.ly/items/1J1g0H2P0S1G1f2O1s1s/icon.png"
-        }
-
-        // duration
-        valueTile("timeRemainingTile", "timeRemaining", decoration: "flat", width: 2) {
-            state "timeRemaining", label:'${currentValue} left'
-        }
-        controlTile("percentCompleteTile", "percentComplete", "slider", height: 1, width: 3) {
-            state "percentComplete", action: "timed session.setTimeRemaining"
-        }
-
-        main "sessionStatusTile"
-        details "richTile"
-//        details(["richTile", "sessionStatusTile", "timeRemainingTile", "percentCompleteTile"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "Parsing '${description}'"
-    // TODO: handle 'switch' attribute
-    // TODO: handle 'level' attribute
-    // TODO: handle 'sessionStatus' attribute
-    // TODO: handle 'timeRemaining' attribute
-
-}
-
-// handle commands
-def on() {
-    log.debug "Executing 'on'"
-    startDimming()
-}
-
-def off() {
-    log.debug "Executing 'off'"
-    stopDimming()
-}
-
-def setTimeRemaining(percentComplete) {
-    log.debug "Executing 'setTimeRemaining' to ${percentComplete}% complete"
-    parent.jumpTo(percentComplete)
-}
-
-def start() {
-    log.debug "Executing 'start'"
-    startDimming()
-}
-
-def stop() {
-    log.debug "Executing 'stop'"
-    stopDimming()
-}
-
-def pause() {
-    log.debug "Executing 'pause'"
-    // TODO: handle 'pause' command
-}
-
-def cancel() {
-    log.debug "Executing 'cancel'"
-    stopDimming()
-}
-
-def startDimming() {
-    log.trace "startDimming"
-    log.debug "parent: ${parent}"
-    parent.start("controller")
-}
-
-def stopDimming() {
-    log.trace "stopDimming"
-    log.debug "parent: ${parent}"
-    parent.stop("controller")
-}
-
-def controllerEvent(eventData) {
-    log.trace "controllerEvent"
-    sendEvent(eventData)
-}

devicetypes/smartthings/harmony-activity.src/harmony-activity.groovy

@@ -1,81 +0,0 @@
-/**
- *  Logitech Harmony Activity
- *
- *  Copyright 2015 Juan Risso
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-        definition (name: "Harmony Activity", namespace: "smartthings", author: "Juan Risso") {
-        capability "Switch"
-        capability "Actuator"
-		capability "Refresh"
-
-        command "huboff"
-        command "alloff"
-        command "refresh"
-	}
-
-	// simulator metadata
-	simulator {
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("button", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: 'Off', action: "switch.on", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: 'On', action: "switch.off", icon: "st.harmony.harmony-hub-icon", backgroundColor: "#79b821", nextState: "off"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		standardTile("forceoff", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'Force End', action:"switch.off", icon:"st.secondary.off"
-		}
-		standardTile("huboff", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'End Hub Action', action:"huboff", icon:"st.harmony.harmony-hub-icon"
-		}
-		standardTile("alloff", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'All Actions', action:"alloff", icon:"st.secondary.off"
-		}
-		main "button"
-		details(["button", "refresh", "forceoff", "huboff", "alloff"])
-	}
-}
-
-def parse(String description) {
-}
-
-def on() {
-	sendEvent(name: "switch", value: "on")
-    log.trace parent.activity(device.deviceNetworkId,"start")
-}
-
-def off() {
-	sendEvent(name: "switch", value: "off")
-    log.trace parent.activity(device.deviceNetworkId,"end")
-}
-
-def huboff() {
-	sendEvent(name: "switch", value: "off")
-    log.trace parent.activity(device.deviceNetworkId,"hub")
-}
-
-def alloff() {
-	sendEvent(name: "switch", value: "off")
-    log.trace parent.activity("all","end")
-}
-
-
-def refresh() {
-	log.debug "Executing 'refresh'"
-	log.trace parent.poll()
-}

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -17,50 +17,44 @@ metadata {
 	}
 
 	simulator {
-
+		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setColor"
-			}
-
-			tileAttribute ("device.model", key: "SECONDARY_CONTROL") {
-				attributeState "model", label: '${currentValue}'
-			}
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
-			state "colorTemp", action:"color temperature.setColorTemperature"
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+			state "color", action:"setColor"
 		}
 
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
+		}
+
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..9000)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main "switch"
-		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "rgbSelector", "colorTempSliderControl", "colorTemp"])
 	}
 }
 
@@ -76,7 +70,7 @@ def parse(String description) {
 def setHue(percentage) {
 	log.debug "setHue ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "hue:${percentage * 3.6}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "hue:${percentage * 3.6}"])
 		if (resp.status < 300) {
 			sendEvent(name: "hue", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -89,7 +83,7 @@ def setHue(percentage) {
 def setSaturation(percentage) {
 	log.debug "setSaturation ${percentage}"
 	parent.logErrors(logObject: log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "saturation:${percentage / 100}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "saturation:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "saturation", value: percentage)
 			sendEvent(name: "switch", value: "on")
@@ -120,7 +114,7 @@ def setColor(Map color) {
 		}
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: attrs.join(" "), power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: attrs.join(" ")])
 		if (resp.status < 300) {
 			sendEvent(name: "color", value: color.hex)
 			sendEvent(name: "switch", value: "on")
@@ -141,10 +135,9 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", ["brightness": percentage / 100, "power": "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
-			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -155,7 +148,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -170,7 +163,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -179,7 +172,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -187,26 +180,19 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${selector()}")
-	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
-		return []
-	} else if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data[0]
-	log.debug("Data: ${data}")
+	def data = resp.data
 
-	sendEvent(name: "label", value: data.label)
-	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "level", value: sprintf("%.1f", (data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "color", value: colorUtil.hslToHex((data.color.hue / 3.6) as int, (data.color.saturation * 100) as int))
-	sendEvent(name: "hue", value: data.color.hue / 3.6)
+	sendEvent(name: "hue",        value: data.color.hue / 3.6)
 	sendEvent(name: "saturation", value: data.color.saturation * 100)
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: "${data.product.company} ${data.product.name}")
 
 	return []
 }
@@ -215,11 +201,3 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
-
-def selector() {
-	if (device.deviceNetworkId.contains(":")) {
-		return device.deviceNetworkId
-	} else {
-		return "id:${device.deviceNetworkId}"
-	}
-}

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -16,44 +16,41 @@ metadata {
 	}
 
 	simulator {
-
+		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "unreachable", label: "?", action:"refresh.refresh", icon:"http://hosted.lifx.co/smartthings/v1/196xUnreachable.png", backgroundColor:"#666666"
-				attributeState "on", label:'${name}', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'Turning on', action:"switch.off", icon:"http://hosted.lifx.co/smartthings/v1/196xOn.png", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'Turning off', action:"switch.on", icon:"http://hosted.lifx.co/smartthings/v1/196xOff.png", backgroundColor:"#ffffff", nextState:"turningOn"
-
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'Turning on', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'Turning off', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "unreachable", label: "?", action:"refresh.refresh", icon:"st.switches.light.off", backgroundColor:"#666666"
 		}
-
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
 		valueTile("null", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:''
 		}
 
-		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 2, width: 4, inactiveLabel: false, range:"(2700..9000)") {
-			state "colorTemp", action:"color temperature.setColorTemperature"
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, icon: "st.illuminance.illuminance.light", decoration: "flat") {
+			state "level", label: '${currentValue}%'
 		}
 
-		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", height: 2, width: 2) {
+		controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
+			state "colorTemp", action:"color temperature.setColorTemperature"
+		}
+		valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat") {
 			state "colorTemp", label: '${currentValue}K'
 		}
 
-		main "switch"
-		details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+		main(["switch"])
+		details(["switch", "refresh", "level", "levelSliderControl", "colorTempSliderControl", "colorTemp"])
 	}
-
 }
 
 // parse events into attributes
@@ -75,10 +72,9 @@ def setLevel(percentage) {
 		return off() // if the brightness is set to 0, just turn it off
 	}
 	parent.logErrors(logObject:log) {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [brightness: percentage / 100, power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", ["color": "brightness:${percentage / 100}"])
 		if (resp.status < 300) {
 			sendEvent(name: "level", value: percentage)
-			sendEvent(name: "switch.setLevel", value: percentage)
 			sendEvent(name: "switch", value: "on")
 		} else {
 			log.error("Bad setLevel result: [${resp.status}] ${resp.data}")
@@ -89,7 +85,7 @@ def setLevel(percentage) {
 def setColorTemperature(kelvin) {
 	log.debug "Executing 'setColorTemperature' to ${kelvin}"
 	parent.logErrors() {
-		def resp = parent.apiPUT("/lights/${selector()}/state", [color: "kelvin:${kelvin}", power: "on"])
+		def resp = parent.apiPUT("/lights/${device.deviceNetworkId}/color", [color: "kelvin:${kelvin}"])
 		if (resp.status < 300) {
 			sendEvent(name: "colorTemperature", value: kelvin)
 			sendEvent(name: "color", value: "#ffffff")
@@ -104,7 +100,7 @@ def setColorTemperature(kelvin) {
 def on() {
 	log.debug "Device setOn"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "on"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "on"]) != null) {
 			sendEvent(name: "switch", value: "on")
 		}
 	}
@@ -113,7 +109,7 @@ def on() {
 def off() {
 	log.debug "Device setOff"
 	parent.logErrors() {
-		if (parent.apiPUT("/lights/${selector()}/state", [power: "off"]) != null) {
+		if (parent.apiPUT("/lights/${device.deviceNetworkId}/power", [state: "off"]) != null) {
 			sendEvent(name: "switch", value: "off")
 		}
 	}
@@ -121,22 +117,16 @@ def off() {
 
 def poll() {
 	log.debug "Executing 'poll' for ${device} ${this} ${device.deviceNetworkId}"
-	def resp = parent.apiGET("/lights/${selector()}")
-	if (resp.status == 404) {
-		sendEvent(name: "switch", value: "unreachable")
-		return []
-	} else if (resp.status != 200) {
+	def resp = parent.apiGET("/lights/${device.deviceNetworkId}")
+	if (resp.status != 200) {
 		log.error("Unexpected result in poll(): [${resp.status}] ${resp.data}")
 		return []
 	}
-	def data = resp.data[0]
+	def data = resp.data
 
-	sendEvent(name: "label", value: data.label)
-	sendEvent(name: "level", value: Math.round((data.brightness ?: 1) * 100))
-	sendEvent(name: "switch.setLevel", value: Math.round((data.brightness ?: 1) * 100))
+	sendEvent(name: "level", value: sprintf("%f", (data.brightness ?: 1) * 100))
 	sendEvent(name: "switch", value: data.connected ? data.power : "unreachable")
 	sendEvent(name: "colorTemperature", value: data.color.kelvin)
-	sendEvent(name: "model", value: data.product.name)
 
 	return []
 }
@@ -145,11 +135,3 @@ def refresh() {
 	log.debug "Executing 'refresh'"
 	poll()
 }
-
-def selector() {
-	if (device.deviceNetworkId.contains(":")) {
-		return device.deviceNetworkId
-	} else {
-		return "id:${device.deviceNetworkId}"
-	}
-}

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -4,7 +4,6 @@
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
     that issue by using state variables
 */
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
@@ -24,8 +23,8 @@ metadata {
         command "setAdjustedColor"
 
 
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
-        //fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW"
 
     }
 

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -5,8 +5,6 @@
     that issue by using state variables
 */
 
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
 metadata {
     definition (name: "OSRAM LIGHTIFY LED Tunable White 60W", namespace: "smartthings", author: "SmartThings") {
 
@@ -22,7 +20,10 @@ metadata {
 
         // indicates that device keeps track of heartbeat (in state.heartbeat)
         attribute "heartbeat", "string"
-        
+
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White"
 
     }
 

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -5,7 +5,7 @@ metadata {
 		capability "Switch"
 		capability "Sensor"
 
-		fingerprint profileId: "0104", inClusters: "0006, 0004, 0003, 0000, 0005", outClusters: "0019", manufacturer: "Compacta International, Ltd", model: "ZBMPlug15", deviceJoinName: "SmartPower Outlet V1"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0006", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/smartsense-garage-door-multi.src/smartsense-garage-door-multi.groovy

@@ -79,8 +79,8 @@ metadata {
 	}
     
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 }
 

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -88,8 +88,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -20,18 +20,18 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-
-		command "enrollResponse"
+        
+        command "enrollResponse"
 
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
+
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
@@ -43,11 +43,11 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -78,7 +78,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -92,59 +92,59 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +153,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,42 +167,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMoistureResult('dry')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0022': // Tamper Alarm
+            break
 
-		case '0x0022': // Tamper Alarm
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	 log.debug 'dry with tamper alarm'
+        	resultMap = getMoistureResult('dry')
+            break
 
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0025': // Restore Report
+        	log.debug 'water with tamper alarm'
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0026': // Trouble/Failure
+            break
 
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -215,47 +215,24 @@ def getTemperature(value) {
 }
 
 private Map getBatteryResult(rawValue) {
-	log.debug "Battery rawValue = ${rawValue}"
+	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
-	def result = [
-		name: 'battery',
-		value: '--'
-	]
-
+    
+    def result = [
+    	name: 'battery'
+    ]
+    
 	def volts = rawValue / 10
-
-	if (rawValue == 0 || rawValue == 255) {}
+	def descriptionText
+	if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
 	else {
-		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
-
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
-			}
-		}
+		def minVolts = 2.1
+    	def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		result.value = Math.min(100, (int) pct * 100)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
 	return result
@@ -290,7 +267,7 @@ private Map getMoistureResult(value) {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -300,32 +277,32 @@ def refresh() {
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def configCmds = [	
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
+    [
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
+    ]
 }
 
 private getEndpointId() {
@@ -337,19 +314,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -19,17 +19,16 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-		capability "Temperature Measurement"
+        capability "Temperature Measurement"
 		capability "Refresh"
-
-		command "enrollResponse"
+        
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 	}
 
 	simulator {
@@ -46,8 +45,8 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
 
@@ -85,7 +84,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -96,55 +95,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0x0406:
-				log.debug 'motion'
-				resultMap.name = 'motion'
-				break
-		}
-	}
+            	log.debug 'motion'
+                resultMap.name = 'motion'
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -153,7 +152,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -162,14 +161,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
-	}
-
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	resultMap = getMotionResult(value)
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -180,44 +179,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMotionResult('inactive')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
+        case '0x0022': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+        	resultMap = getMotionResult('inactive')
+            break
 
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0025': // Restore Report
+            break
 
-		case '0x0025': // Restore Report
-			break
+        case '0x0026': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -230,46 +229,30 @@ def getTemperature(value) {
 }
 
 private Map getBatteryResult(rawValue) {
-	log.debug "Battery rawValue = ${rawValue}"
+	log.debug 'Battery'
 	def linkText = getLinkText(device)
 
+	log.debug rawValue
+
 	def result = [
 		name: 'battery',
 		value: '--'
 	]
 
 	def volts = rawValue / 10
+	def descriptionText
 
-	if (rawValue == 0 || rawValue == 255) {}
+	if (rawValue == 0) {}
 	else {
 		if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
-		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
-
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
-			}
+		else if (volts > 0){
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}
 
@@ -354,19 +337,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -14,28 +14,27 @@
  *
  */
 
-metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Three Axis"
+ metadata {
+ 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+ 		
+        capability "Three Axis"
 		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
+ 		capability "Configuration"
+        capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-
+        
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
-	}
+ 	}
 
-	simulator {
+ 	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -52,7 +51,7 @@ metadata {
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
-	preferences {
+ 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -62,13 +61,13 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
+ 			input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 			input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		}
 		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
-	}
+ 	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -106,9 +105,9 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+ 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+ 		}
 
 
 		main(["status", "acceleration", "temperature"])
@@ -116,104 +115,91 @@ metadata {
 	}
  }
 
-def parse(String description) {
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
+ def parse(String description) {
+ 	
+ 	Map map = [:]
+ 	if (description?.startsWith('catchall:')) {
+ 		map = parseCatchAllMessage(description)
+ 	}
+ 	else if (description?.startsWith('read attr -')) {
+ 		map = parseReportAttributeMessage(description)
+ 	}
+    else if (description?.startsWith('temperature: ')) {
+ 		map = parseCustomMessage(description)
+ 	}
+ 	else if (description?.startsWith('zone status')) {
+ 		map = parseIasMessage(description)
+ 	}
 
-	def result = map ? createEvent(map) : null
+ 	def result = map ? createEvent(map) : null
 
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
-	}
-	return result
-}
+ 	if (description?.startsWith('enroll request')) {
+ 		List cmds = enrollResponse()
+ 		log.debug "enroll response: ${cmds}"
+ 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+ 	}
+ 	return result
+ }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	log.debug cluster
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
-			break
+ private Map parseCatchAllMessage(String description) {
+ 	Map resultMap = [:]
+ 	def cluster = zigbee.parse(description)
+    log.debug cluster
+ 	if (shouldProcessMessage(cluster)) {
+ 		switch(cluster.clusterId) {
+ 			case 0x0001:
+ 			resultMap = getBatteryResult(cluster.data.last())
+ 			break
 
-			case 0xFC02:
-			log.debug 'ACCELERATION'
-			break
+ 			case 0xFC02:
+            log.debug 'ACCELERATION'
+ 			break
 
-			case 0x0402:
-			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+ 			case 0x0402:
+ 			log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+            }
+        }
 
-	return resultMap
-}
+        return resultMap
+    }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-	cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
-	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    cluster.command == 0x0B ||
+    cluster.command == 0x07 ||
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
-private List parseReportAttributeMessage(String description) {
+private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
-
-	List result = []
+    
+    Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
-		result << getTemperatureResult(value)
+		resultMap = getTemperatureResult(value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0010") {
-		if (descMap.value.size() == 32) {
-			// value will look like 00ae29001403e2290013001629001201
-			// breaking this apart and swapping byte order where appropriate, this breaks down to:
-			//   X (0x0012) = 0x0016
-			//   Y (0x0013) = 0x03E2
-			//   Z (0x0014) = 0x00AE
-			// note that there is a known bug in that the x,y,z attributes are interpreted in the wrong order
-			// this will be fixed in a future update
-			def threeAxisAttributes = descMap.value[0..-9]
-			result << parseAxis(threeAxisAttributes)
-			descMap.value = descMap.value[-2..-1]
-		}
-		result << getAccelerationResult(descMap.value)
+  		resultMap = getAccelerationResult(descMap.value)
 	}
-	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
+    else if (descMap.cluster == "FC02" && descMap.attrId == "0012") {
+  		resultMap = parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
 
-	return result
+	return resultMap
 }
 
 private Map parseCustomMessage(String description) {
@@ -231,43 +217,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0022': // Tamper Alarm
-		break
+        case '0x0022': // Tamper Alarm
+        break
 
-		case '0x0023': // Battery Alarm
-		break
+        case '0x0023': // Battery Alarm
+        break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0026': // Trouble/Failure
-		break
+        case '0x0026': // Trouble/Failure
+        break
 
-		case '0x0028': // Test Mode
-		break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+        break
+    }
+    return resultMap
 }
 
 def updated() {
@@ -302,141 +288,115 @@ def getTemperature(value) {
 		}
 	}
 
-private Map getBatteryResult(rawValue) {
-	log.debug "Battery rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
+	private Map getBatteryResult(rawValue) {
+		log.debug "Battery"
+        log.debug rawValue
+		def linkText = getLinkText(device)
 
-	def result = [
+		def result = [
 		name: 'battery',
-		value: '--'
-	]
+        value: '--'
+		]
 
-	def volts = rawValue / 10
-
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
+		def volts = rawValue / 10
+		def descriptionText
+        
+        if (rawValue == 255) {}
+        else {
+		
+        if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
-				volts = rawValue // For the batteryMap to work the key needs to be an int
-				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
-								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
-				def minVolts = 15
-				def maxVolts = 28
+			def minVolts = 2.1
+			def maxVolts = 3.0
+			def pct = (volts - minVolts) / (maxVolts - minVolts)
+			result.value = Math.min(100, (int) pct * 100)
+			result.descriptionText = "${linkText} battery was ${result.value}%"
+		}}
 
-				if (volts < minVolts)
-					volts = minVolts
-				else if (volts > maxVolts)
-					volts = maxVolts
-				def pct = batteryMap[volts]
-				if (pct != null) {
-					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
-				}
-			}
-			else {
-				def minVolts = 2.1
-				def maxVolts = 3.0
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
-			}
+		return result
+	}
+
+	private Map getTemperatureResult(value) {
+		log.debug "Temperature"
+		def linkText = getLinkText(device)
+		if (tempOffset) {
+			def offset = tempOffset as int
+			def v = value as int
+			value = v + offset
 		}
-	}
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	log.debug "Temperature"
-	def linkText = getLinkText(device)
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText
-	]
-}
-
-private Map getContactResult(value) {
-	log.debug "Contact"
-	def linkText = getLinkText(device)
-	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText)
-}
-
-private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
-	def name = "acceleration"
-	def value = numValue.endsWith("1") ? "active" : "inactive"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value"
-	def isStateChange = isStateChange(device, name, value)
-	[
-		name: name,
+		def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+		return [
+		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText,
-		isStateChange: isStateChange
-	]
-}
-
-def refresh() {
-	log.debug "Refreshing Values "
-
-	def refreshCmds = []
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				Separating these out in a separate if-else because I do not want to touch Centralite part
-				as of now.
-			*/
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
-	} else {
-		refreshCmds = refreshCmds + [
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		descriptionText: descriptionText
 		]
 	}
 
-	//Common refresh commands
-	refreshCmds = refreshCmds + [
+	private Map getContactResult(value) {
+		log.debug "Contact"
+		def linkText = getLinkText(device)
+		def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+		sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
+		sendEvent(name: 'status', value: value, descriptionText: descriptionText)
+	}
+
+	private getAccelerationResult(numValue) {
+		log.debug "Acceleration"
+        def name = "acceleration"
+		def value = numValue.endsWith("1") ? "active" : "inactive"
+		def linkText = getLinkText(device)
+		def descriptionText = "$linkText was $value"
+		def isStateChange = isStateChange(device, name, value)
+		[
+			name: name,
+			value: value,
+			descriptionText: descriptionText,
+			isStateChange: isStateChange
+		]
+	}
+
+	def refresh() {
+		log.debug "Refreshing Values "
+		def refreshCmds = [
+        
+        /* sensitivity - default value (8) */
+        
+        "zcl mfg-code 0x104E", "delay 200",
+        "zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
+        "zcl mfg-code 0x104E", "delay 200",
+        "zcl global read 0xFC02 0x0010",
+        "send 0x${device.deviceNetworkId} 1 1","delay 400",
+        
+        "zcl mfg-code 0x104E", "delay 200",
+        "zcl global read 0xFC02 0x0012",
+        "send 0x${device.deviceNetworkId} 1 1","delay 400",
+        
+        "zcl mfg-code 0x104E", "delay 200",
+        "zcl global read 0xFC02 0x0013",
+        "send 0x${device.deviceNetworkId} 1 1","delay 400",
+        
+        "zcl mfg-code 0x104E", "delay 200",
+        "zcl global read 0xFC02 0x0014",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 400"
+		]
 
-	return refreshCmds + enrollResponse()
-}
+		return refreshCmds + enrollResponse()
+	}
 
-def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting"
+	def configure() {
+
+		String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+		log.debug "Configuring Reporting"
+		
+		def configCmds = [
 
-	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
@@ -449,24 +409,25 @@ def configure() {
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}",
+		"zcl mfg-code 0x104E", 
 		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
+		"zcl mfg-code 0x104E",
 		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
+		"zcl mfg-code 0x104E",
 		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
+		"zcl mfg-code 0x104E",
 		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
 
-	return configCmds + refresh()
+		]
+   
+   return configCmds + refresh()
 }
 
 private getEndpointId() {
@@ -486,34 +447,35 @@ def enrollResponse() {
 	]
 }
 
+
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
-	def z = hexToSignedInt(description[0..3])
-	def y = hexToSignedInt(description[10..13])
-	def x = hexToSignedInt(description[20..23])
-	def xyzResults = [x: x, y: y, z: z]
-
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		// This mapping matches the current behavior of the Device Handler for the Centralite sensors
-		xyzResults.x = z
-		xyzResults.y = y
-		xyzResults.z = -x
-	} else {
-		// The axises reported by the Device Handler differ from the axises reported by the sensor
-		// This may change in the future
-		xyzResults.x = z
-		xyzResults.y = x
-		xyzResults.z = y
-	}
-
-	log.debug "parseAxis -- ${xyzResults}"
-
-	if (garageSensor == "Yes")
-		garageEvent(xyzResults.z)
+	log.debug "parseAxis"
+	def xyzResults = [x: 0, y: 0, z: 0]
+    def parts = description.split("2900")
+    parts[0] = "12" + parts[0]
+    parts.each { part ->
+    	part = part.trim()
+        if (part.startsWith("12")) {
+    		def unsignedX = hexToInt(part.split("12")[1].trim())
+			def signedX = unsignedX > 32767 ? unsignedX - 65536 : unsignedX
+			xyzResults.x = signedX
+            log.debug "X Part: ${signedX}"
+        }
+        else if (part.startsWith("13")) {
+			def unsignedY = hexToInt(part.split("13")[1].trim())
+			def signedY = unsignedY > 32767 ? unsignedY - 65536 : unsignedY
+			xyzResults.y = signedY
+            log.debug "Y Part: ${signedY}"
+        }
+        else if (part.startsWith("14")) {
+			def unsignedZ = hexToInt(part.split("14")[1].trim())
+			def signedZ = unsignedZ > 32767 ? unsignedZ - 65536 : unsignedZ
+			xyzResults.z = signedZ
+            log.debug "Z Part: ${signedZ}"
+			if (garageSensor == "Yes")
+				garageEvent(signedZ)
+        }
+    }
 
 	getXyzResult(xyzResults, description)
 }
@@ -557,14 +519,6 @@ private Map getXyzResult(results, description) {
 	]
 }
 
-private getManufacturerCode() {
-	if (device.getDataValue("manufacturer") == "SmartThings") {
-		return "0x110A"
-	} else {
-		return "0x104E"
-	}
-}
-
 private hexToInt(value) {
 	new BigInteger(value, 16)
 }
@@ -590,3 +544,4 @@ private byte[] reverseArray(byte[] array) {
 	}
 	return array
 }
+

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -43,8 +43,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -32,8 +32,8 @@
  	}
 
  	preferences {
- 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
- 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+ 		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+ 		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
  	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -34,8 +34,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
 
 	tiles(scale: 2) {

devicetypes/smartthings/smartsense-virtual-open-closed.src/smartsense-virtual-open-closed.groovy

@@ -45,8 +45,8 @@ metadata {
 	}
     
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}    
 
 	tiles {

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
 metadata {
 	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
 		capability "Switch Level"

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,5 +1,5 @@
 metadata {
-	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
+	definition (name: "Color Control Capability", namespace: "capabilities", author: "SmartThings") {
     	capability "Color Control"
 	}
 

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
-		capability "Relative Humidity Measurement"
 
 		command "tempUp"
 		command "tempDown"
@@ -23,40 +22,11 @@ metadata {
 		command "heatDown"
 		command "coolUp"
 		command "coolDown"
-		command "setTemperature", ["number"]
+        command "setTemperature", ["number"]
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
-			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("default", action: "setTemperature")
-			}
-			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
-				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
-				attributeState("cooling", backgroundColor:"#269bd2")
-			}
-			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
-				attributeState("off", label:'${name}')
-				attributeState("heat", label:'${name}')
-				attributeState("cool", label:'${name}')
-				attributeState("auto", label:'${name}')
-			}
-			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("default", label:'${currentValue}', unit:"dF")
-			}
-		}
-
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+	tiles {
+		valueTile("temperature", "device.temperature", width: 1, height: 1) {
 			state("temperature", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
@@ -69,51 +39,51 @@ metadata {
 				]
 			)
 		}
-		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"tempDown"
 		}
-		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"tempUp"
 		}
 
-		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
-		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"heatDown"
 		}
-		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("heatUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"heatUp"
 		}
 
-		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
-		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'down', action:"coolDown"
 		}
-		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("coolUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'up', action:"coolUp"
 		}
 
-		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
 			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
 			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
 			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
 		}
-		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
 			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
 			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
 		}
-		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+		standardTile("operatingState", "device.thermostatOperatingState") {
 			state "idle", label:'${name}', backgroundColor:"#ffffff"
 			state "heating", label:'${name}', backgroundColor:"#ffa81e"
 			state "cooling", label:'${name}', backgroundColor:"#269bd2"
 		}
 
-		main("thermostatMulti")
+		main("temperature","operatingState")
 		details([
 			"temperature","tempDown","tempUp",
 			"mode", "fanMode", "operatingState",
@@ -131,7 +101,6 @@ def installed() {
 	sendEvent(name: "thermostatMode", value: "off")
 	sendEvent(name: "thermostatFanMode", value: "fanAuto")
 	sendEvent(name: "thermostatOperatingState", value: "idle")
-	sendEvent(name: "humidity", value: 53, unit: "%")
 }
 
 def parse(String description) {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -33,8 +33,8 @@ metadata {
 	}
 
 	preferences {
-		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
  
 	tiles {

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -29,18 +29,18 @@ metadata {
 
 	tiles {
 
-		valueTile("power", "device.power", canChangeIcon: true) {
+		valueTile("power", "device.power") {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
+		tile(name: "powerChart", attribute: "powerContent", type: "HTML", url: '${currentValue}', width: 3, height: 2) { }
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"
 		}
 
 		main "power"
-		details(["powerContent", "power", "refresh"])
+		details(["powerChart", "power", "refresh"])
 
 	}
 }
@@ -74,10 +74,10 @@ public addWattvisionData(json) {
 
 	log.trace "Adding data from Wattvision"
 
-	def data = parseJson(json.data.toString())
+	def data = json.data
 	def units = json.units ?: "watts"
 
-	if (data.size() > 0) {
+	if (data) {
 		def latestData = data[-1]
 		data.each {
 			sendPowerEvent(it.t, it.v, units, (latestData == it))
@@ -103,7 +103,3 @@ private sendPowerEvent(time, value, units, isLatest = false) {
 	sendEvent(eventData)
 
 }
-
-def parseJson(String s) {
-	new groovy.json.JsonSlurper().parseText(s)
-}

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -15,8 +15,6 @@
  *  Thanks to Chad Monroe @cmonroe and Patrick Stuart @pstuart
  *
  */
-//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
-
 metadata {
 	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
 	
@@ -27,6 +25,7 @@ metadata {
         capability "Switch"
 		capability "Switch Level"
 
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,FF00", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -25,8 +25,6 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-    attribute "currentIP", "string"
-
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -36,36 +34,21 @@ metadata {
 	// simulator metadata
 	simulator {}
 
- // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
-                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
-                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
- 			}
-            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
-             	 attributeState "currentIP", label: ''
- 			}
-        }
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
+			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
+		}
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
-            state "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
-            state "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
-        }
-
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["rich-control", "refresh"])
-    }
+		main "switch"
+		details (["switch", "refresh"])
+	}
 }
 
 // parse events into attributes
@@ -85,7 +68,6 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-		unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
 
 		if (body?.property?.TimeSyncRequest?.text()) {
@@ -96,14 +78,13 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "Notify: BinaryState = ${value}"
-			          result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}")
+			result << createEvent(name: "switch", value: value)
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
 			log.trace "GetBinaryResponse: BinaryState = ${value}"
-			def dispaux = device.currentValue("switch") != value
-			result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
+			result << createEvent(name: "switch", value: value)
 		}
 	}
 
@@ -120,6 +101,14 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
+private Integer convertHexToInt(hex) {
+    Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+    [convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -206,8 +195,6 @@ def subscribe(ip, port) {
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
 		updateDataValue("ip", ip)
-    	def ipvalue = convertHexToIP(getDataValue("ip"))
-        sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -272,8 +259,6 @@ User-Agent: CyberGarage-HTTP/1.0
 
 def poll() {
 log.debug "Executing 'poll'"
-if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -289,15 +274,3 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
-
-def setOffline() {
-    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
-}
-
-private Integer convertHexToInt(hex) {
- 	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
- 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -21,8 +21,6 @@
 		capability "Refresh"
 		capability "Sensor"
 
-    	attribute "currentIP", "string"
-
 		command "subscribe"
 		command "resubscribe"
 		command "unsubscribe"
@@ -33,30 +31,17 @@
 	}
 
 	// UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "motion", canChangeIcon: true){
-            tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-                 attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-                 attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-                 attributeState "offline", label:'${name}', icon:"st.motion.motion.active", backgroundColor:"#ff0000"
- 			}
-            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
-             	 attributeState "currentIP", label: ''
- 			}
-        }
-
+	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-      		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
+		}
+		standardTile("refresh", "device.motion", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
 		main "motion"
-		details (["rich-control", "refresh"])
+		details (["motion", "refresh"])
 	}
 }
 
@@ -77,8 +62,8 @@ def parse(String description) {
 	def result = []
 	def bodyString = msg.body
 	if (bodyString) {
-    	unschedule("setOffline")
 		def body = new XmlSlurper().parseText(bodyString)
+
 		if (body?.property?.TimeSyncRequest?.text()) {
 			log.trace "Got TimeSyncRequest"
 			result << timeSyncResponse()
@@ -87,7 +72,7 @@ def parse(String description) {
 		} else if (body?.property?.BinaryState?.text()) {
 			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "active" : "inactive"
 			log.debug "Notify - BinaryState = ${value}"
-      result << createEvent(name: "motion", value: value, descriptionText: "Motion is ${value}")
+			result << createEvent(name: "motion", value: value)
 		} else if (body?.property?.TimeZoneNotification?.text()) {
 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
 		}
@@ -106,6 +91,14 @@ private getCallBackAddress() {
 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+private String convertHexToIP(hex) {
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
 private getHostAddress() {
 	def ip = getDataValue("ip")
 	def port = getDataValue("port")
@@ -132,8 +125,6 @@ def refresh() {
 ////////////////////////////
 def getStatus() {
 log.debug "Executing WeMo Motion 'getStatus'"
-if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -174,9 +165,7 @@ def subscribe(ip, port) {
 	def existingPort = getDataValue("port")
 	if (ip && ip != existingIp) {
 		log.debug "Updating ip from $existingIp to $ip"
-        updateDataValue("ip", ip)
-    	def ipvalue = convertHexToIP(getDataValue("ip"))
-    	sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
+		updateDataValue("ip", ip)
 	}
 	if (port && port != existingPort) {
 		log.debug "Updating port from $existingPort to $port"
@@ -237,15 +226,3 @@ User-Agent: CyberGarage-HTTP/1.0
 </s:Envelope>
 """, physicalgraph.device.Protocol.LAN)
 }
-
-def setOffline() {
-    sendEvent(name: "motion", value: "offline", descriptionText: "The device is offline")
-}
-
-private Integer convertHexToInt(hex) {
- 	Integer.parseInt(hex,16)
-}
-
-private String convertHexToIP(hex) {
- 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
-}

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -10,143 +10,120 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- * Wemo Switch
+ *	Wemo Switch
  *
- * Author: Juan Risso (SmartThings)
- * Date: 2015-10-11
+ *	Author: superuser
+ *	Date: 2013-10-11
  */
  metadata {
- 	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Switch"
-        capability "Polling"
-        capability "Refresh"
-        capability "Sensor"
+	definition (name: "Wemo Switch", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
 
-        attribute "currentIP", "string"
+		command "subscribe"
+		command "resubscribe"
+		command "unsubscribe"
+	}
 
-        command "subscribe"
-        command "resubscribe"
-        command "unsubscribe"
-        command "setOffline"
- }
+	// simulator metadata
+	simulator {}
 
- // simulator metadata
- simulator {}
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 
- // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
-                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
-                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
- 			}
-            tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
-             	 attributeState "currentIP", label: ''
- 			}
-        }
-
-        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
-            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
-            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
-        }
-
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["rich-control", "refresh"])
-    }
+		main "switch"
+		details (["switch", "refresh"])
+	}
 }
 
 // parse events into attributes
 def parse(String description) {
-    log.debug "Parsing '${description}'"
+	log.debug "Parsing '${description}'"
 
-    def msg = parseLanMessage(description)
-    def headerString = msg.header
+	def msg = parseLanMessage(description)
+	def headerString = msg.header
 
-    if (headerString?.contains("SID: uuid:")) {
-        def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
-        sid -= "SID: uuid:".trim()
+	if (headerString?.contains("SID: uuid:")) {
+		def sid = (headerString =~ /SID: uuid:.*/) ? ( headerString =~ /SID: uuid:.*/)[0] : "0"
+		sid -= "SID: uuid:".trim()
 
-        updateDataValue("subscriptionId", sid)
- 	}
+		updateDataValue("subscriptionId", sid)
+	}
 
-    def result = []
-    def bodyString = msg.body
-    if (bodyString) {
-    	unschedule("setOffline")
-        def body = new XmlSlurper().parseText(bodyString)
- 		if (body?.property?.TimeSyncRequest?.text()) {
-        	log.trace "Got TimeSyncRequest"
-        	result << timeSyncResponse()
-        } else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
- 			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
- 		} else if (body?.property?.BinaryState?.text()) {
-        	def value = body?.property?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
-        	log.trace "Notify: BinaryState = ${value}, ${body.property.BinaryState}"
-            def dispaux = device.currentValue("switch") != value
-            result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux)
-        } else if (body?.property?.TimeZoneNotification?.text()) {
- 			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
- 		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
- 			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().substring(0, 1).toInteger() == 0 ? "off" : "on"
- 			log.trace "GetBinaryResponse: BinaryState = ${value}, ${body.property.BinaryState}"
-            log.info "Connection: ${device.currentValue("connection")}"
-            if (device.currentValue("currentIP") == "Offline") {
-                def ipvalue = convertHexToIP(getDataValue("ip"))
-                sendEvent(name: "IP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-            }
-            def dispaux2 = device.currentValue("switch") != value
-     		result << createEvent(name: "switch", value: value, descriptionText: "Switch is ${value}", displayed: dispaux2)
- 		}
- 	}
- result
+	def result = []
+	def bodyString = msg.body
+	if (bodyString) {
+		def body = new XmlSlurper().parseText(bodyString)
+
+		if (body?.property?.TimeSyncRequest?.text()) {
+			log.trace "Got TimeSyncRequest"
+			result << timeSyncResponse()
+		} else if (body?.Body?.SetBinaryStateResponse?.BinaryState?.text()) {
+			log.trace "Got SetBinaryStateResponse = ${body?.Body?.SetBinaryStateResponse?.BinaryState?.text()}"
+		} else if (body?.property?.BinaryState?.text()) {
+			def value = body?.property?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
+			log.trace "Notify: BinaryState = ${value}"
+			result << createEvent(name: "switch", value: value)
+		} else if (body?.property?.TimeZoneNotification?.text()) {
+			log.debug "Notify: TimeZoneNotification = ${body?.property?.TimeZoneNotification?.text()}"
+		} else if (body?.Body?.GetBinaryStateResponse?.BinaryState?.text()) {
+			def value = body?.Body?.GetBinaryStateResponse?.BinaryState?.text().toInteger() == 1 ? "on" : "off"
+			log.trace "GetBinaryResponse: BinaryState = ${value}"
+			result << createEvent(name: "switch", value: value)
+		}
+	}
+
+	result
 }
 
 private getTime() {
-    // This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
-    ((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
+	// This is essentially System.currentTimeMillis()/1000, but System is disallowed by the sandbox.
+	((new GregorianCalendar().time.time / 1000l).toInteger()).toString()
 }
 
 private getCallBackAddress() {
- 	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
+	device.hub.getDataValue("localIP") + ":" + device.hub.getDataValue("localSrvPortTCP")
 }
 
 private Integer convertHexToInt(hex) {
- 	Integer.parseInt(hex,16)
+	Integer.parseInt(hex,16)
 }
 
 private String convertHexToIP(hex) {
- 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
 private getHostAddress() {
- 	def ip = getDataValue("ip")
- 	def port = getDataValue("port")
- 	if (!ip || !port) {
- 		def parts = device.deviceNetworkId.split(":")
- 		if (parts.length == 2) {
- 			ip = parts[0]
- 			port = parts[1]
- 		} else {
- 			log.warn "Can't figure out ip and port for device: ${device.id}"
-		 }
- 	}
- 	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
- 	return convertHexToIP(ip) + ":" + convertHexToInt(port)
+	def ip = getDataValue("ip")
+	def port = getDataValue("port")
+
+	if (!ip || !port) {
+		def parts = device.deviceNetworkId.split(":")
+		if (parts.length == 2) {
+			ip = parts[0]
+			port = parts[1]
+		} else {
+			log.warn "Can't figure out ip and port for device: ${device.id}"
+		}
+	}
+	log.debug "Using ip: ${ip} and port: ${port} for device: ${device.id}"
+	return convertHexToIP(ip) + ":" + convertHexToInt(port)
 }
 
+
 def on() {
-log.debug "Executing 'on'"
+	log.debug "Executing 'on'"
+    sendEvent(name: "switch", value: "on")
 def turnOn = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
@@ -156,16 +133,17 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
- <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>1</BinaryState>
- </m:SetBinaryState>
+	</m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
 def off() {
-log.debug "Executing 'off'"
-def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
+	log.debug "Executing 'off'"
+	sendEvent(name: "switch", value: "off")
+	def turnOff = new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPAction: "urn:Belkin:service:basicevent:1#SetBinaryState"
 Host: ${getHostAddress()}
 Content-Type: text/xml
@@ -174,13 +152,36 @@ Content-Length: 333
 <?xml version="1.0"?>
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
 <SOAP-ENV:Body>
- <m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
+	<m:SetBinaryState xmlns:m="urn:Belkin:service:basicevent:1">
 <BinaryState>0</BinaryState>
- </m:SetBinaryState>
+	</m:SetBinaryState>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>""", physicalgraph.device.Protocol.LAN)
 }
 
+/*def refresh() {
+	log.debug "Executing 'refresh'"
+new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
+SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
+Content-Length: 277
+Content-Type: text/xml; charset="utf-8"
+HOST: ${getHostAddress()}
+User-Agent: CyberGarage-HTTP/1.0
+
+<?xml version="1.0" encoding="utf-8"?>
+<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
+<s:Body>
+<u:GetBinaryState xmlns:u="urn:Belkin:service:basicevent:1">
+</u:GetBinaryState>
+</s:Body>
+</s:Envelope>""", physicalgraph.device.Protocol.LAN)
+}*/
+
+def refresh() {
+	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
+	[subscribe(), timeSyncResponse(), poll()]
+}
+
 def subscribe(hostAddress) {
 log.debug "Executing 'subscribe()'"
 def address = getCallBackAddress()
@@ -199,30 +200,27 @@ def subscribe() {
 	subscribe(getHostAddress())
 }
 
-def refresh() {
- 	log.debug "Executing WeMo Switch 'subscribe', then 'timeSyncResponse', then 'poll'"
- 	[subscribe(), timeSyncResponse(), poll()]
-}
-
 def subscribe(ip, port) {
-    def existingIp = getDataValue("ip")
-    def existingPort = getDataValue("port")
-    if (ip && ip != existingIp) {
-         log.debug "Updating ip from $existingIp to $ip"    
-    	 updateDataValue("ip", ip)
-    	 def ipvalue = convertHexToIP(getDataValue("ip"))
-         sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP changed to ${ipvalue}")
-    }
- 	if (port && port != existingPort) {
- 		log.debug "Updating port from $existingPort to $port"
- 		updateDataValue("port", port)
+	def existingIp = getDataValue("ip")
+	def existingPort = getDataValue("port")
+	if (ip && ip != existingIp) {
+		log.debug "Updating ip from $existingIp to $ip"
+		updateDataValue("ip", ip)
 	}
+	if (port && port != existingPort) {
+		log.debug "Updating port from $existingPort to $port"
+		updateDataValue("port", port)
+	}
+
 	subscribe("${ip}:${port}")
 }
 
+////////////////////////////
 def resubscribe() {
-    log.debug "Executing 'resubscribe()'"
-    def sid = getDeviceDataByName("subscriptionId")
+log.debug "Executing 'resubscribe()'"
+
+def sid = getDeviceDataByName("subscriptionId")
+
 new physicalgraph.device.HubAction("""SUBSCRIBE /upnp/event/basicevent1 HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -230,11 +228,12 @@ TIMEOUT: Second-5400
 
 
 """, physicalgraph.device.Protocol.LAN)
+
 }
 
-
+////////////////////////////
 def unsubscribe() {
-    def sid = getDeviceDataByName("subscriptionId")
+def sid = getDeviceDataByName("subscriptionId")
 new physicalgraph.device.HubAction("""UNSUBSCRIBE publisher path HTTP/1.1
 HOST: ${getHostAddress()}
 SID: uuid:${sid}
@@ -243,7 +242,7 @@ SID: uuid:${sid}
 """, physicalgraph.device.Protocol.LAN)
 }
 
-
+////////////////////////////
 //TODO: Use UTC Timezone
 def timeSyncResponse() {
 log.debug "Executing 'timeSyncResponse()'"
@@ -268,15 +267,9 @@ User-Agent: CyberGarage-HTTP/1.0
 """, physicalgraph.device.Protocol.LAN)
 }
 
-def setOffline() {
-	//sendEvent(name: "currentIP", value: "Offline", displayed: false)
-    sendEvent(name: "switch", value: "offline", descriptionText: "The device is offline")
-}
 
 def poll() {
 log.debug "Executing 'poll'"
-if (device.currentValue("currentIP") != "Offline")
-    runIn(30, setOffline)
 new physicalgraph.device.HubAction("""POST /upnp/control/basicevent1 HTTP/1.1
 SOAPACTION: "urn:Belkin:service:basicevent:1#GetBinaryState"
 Content-Length: 277
@@ -291,4 +284,4 @@ User-Agent: CyberGarage-HTTP/1.0
 </u:GetBinaryState>
 </s:Body>
 </s:Envelope>""", physicalgraph.device.Protocol.LAN)
-}
+}

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -24,9 +24,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-CIA19NAE26", deviceJoinName: "Sengled Element touch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45852", deviceJoinName: "GE Zigbee Plug-In Dimmer"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45857", deviceJoinName: "GE Zigbee In-Wall Dimmer"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -17,14 +17,12 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
+        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -32,13 +32,7 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
                         manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
+                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale YRL220 Lock"
     }
 
     tiles(scale: 2) {
@@ -91,24 +85,11 @@ def uninstalled() {
 }
 
 def configure() {
-    /*
     def cmds =
         zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
                            "${TYPE_ENUM8}", 0, 3600, "{01}") +
         zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
-                           "${TYPE_U8}", 600, 21600, "{01}")
-    */
-    def zigbeeId = device.zigbeeId
-    def cmds =
-        [
-            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
-            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
-            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
-
-            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
-            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
-            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
-        ]
+                           "${TYPE_U8}", 3600, 3600, "{01}")
     log.info "configure() --- cmds: $cmds"
     return cmds + refresh() // send refresh cmds as part of config
 }
@@ -136,17 +117,15 @@ def parse(String description) {
 
 // Lock capability commands
 def lock() {
-    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
-    //log.info "lock() -- cmds: $cmds"
-    //return cmds
-    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
+    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
+    log.info "lock() -- cmds: $cmds"
+    return cmds
 }
 
 def unlock() {
-    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
-    //log.info "unlock() -- cmds: $cmds"
-    //return cmds
-    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
+    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
+    log.info "unlock() -- cmds: $cmds"
+    return cmds
 }
 
 // Private methods
@@ -160,10 +139,8 @@ private Map parseReportAttributeMessage(String description) {
     Map resultMap = [:]
     if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
         resultMap.name = "battery"
-        resultMap.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
-        if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
-            resultMap.value = Integer.parseInt(descMap.value, 16)
-        }
+        // BatteryPercentageRemaining is specified in .5% increments
+        resultMap.value = Integer.parseInt(descMap.value, 16) / 2
         log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
     }
     else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,144 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Author: SmartThings
- *  Date: 2016-01-19
- *
- *  This DTH should serve as the generic DTH to handle RGBW ZigBee HA devices
- */
-
-metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Control"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.color", key: "COLOR_CONTROL") {
-                attributeState "color", action:"color control.setColor"
-            }
-        }
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
-    }
-    else {
-        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        log.trace "zigbeeMap : $zigbeeMap"
-
-        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else {
-            log.info "DID NOT PARSE MESSAGE for description : $description"
-        }
-    }
-}
-
-def on() {
-    zigbee.on()
-}
-
-def off() {
-    zigbee.off()
-}
-
-def refresh() {
-    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setColorTemperature(value) {
-    zigbee.setColorTemperature(value)
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
-}

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -23,8 +23,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -17,6 +17,7 @@ metadata {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
+        capability "Sensor"
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -23,18 +23,14 @@ metadata {
         capability "Color Temperature"
         capability "Configuration"
         capability "Refresh"
+        capability "Sensor"
         capability "Switch"
         capability "Switch Level"
 
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04", outClusters: "0019"
     }
 
     // UI tile definitions

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -66,20 +66,9 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
-def updated() {
-	try {
-		if (!state.init) {
-			state.init = true
-			response(secureSequence([zwave.doorLockV1.doorLockOperationGet(), zwave.batteryV1.batteryGet()]))
-		}
-	} catch (e) {
-		log.warn "updated() threw $e"
-	}
-}
-
 def parse(String description) {
 	def result = null
-	if (description.startsWith("Err 106")) {
+	if (description.startsWith("Err")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -91,8 +80,6 @@ def parse(String description) {
 				displayed: true,
 			)
 		}
-	} else if (description == "updated") {
-		return null
 	} else {
 		def cmd = zwave.parse(description, [ 0x98: 1, 0x72: 2, 0x85: 2, 0x86: 1 ])
 		if (cmd) {
@@ -299,7 +286,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 			}
 			break
 		case 167:
-			if (!state.lastbatt || now() - state.lastbatt > 12*60*60*1000) {
+			if (!state.lastbatt || (new Date().time) - state.lastbatt > 12*60*60*1000) {
 				map = [ descriptionText: "$device.displayName: battery low", isStateChange: true ]
 				result << response(secure(zwave.batteryV1.batteryGet()))
 			} else {
@@ -444,7 +431,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	} else {
 		map.value = cmd.batteryLevel
 	}
-	state.lastbatt = now()
+	state.lastbatt = new Date().time
 	createEvent(map)
 }
 
@@ -512,14 +499,15 @@ def refresh() {
 		cmds << "delay 4200"
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()  // old Schlage locks use group 2 and don't secure the Association CC
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = now()
-	} else if (secondsPast(state.associationQuery, 9)) {
+		state.associationQuery = new Date().time
+	} else if (new Date().time - state.associationQuery.toLong() > 9000) {
+		log.debug "setting association"
 		cmds << "delay 6000"
 		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
 		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
 		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
 		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
-		state.associationQuery = now()
+		state.associationQuery = new Date().time
 	}
 	log.debug "refresh sending ${cmds.inspect()}"
 	cmds
@@ -527,22 +515,55 @@ def refresh() {
 
 def poll() {
 	def cmds = []
-	// Only check lock state if it changed recently or we haven't had an update in an hour
-	def latest = device.currentState("lock")?.date?.time
-	if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
-		cmds << secure(zwave.doorLockV1.doorLockOperationGet())
-		state.lastPoll = now()
-	} else if (!state.lastbatt || now() - state.lastbatt > 53*60*60*1000) {
-		cmds << secure(zwave.batteryV1.batteryGet())
-		state.lastbatt = now()  //inside-214
-	}
-	if (cmds) {
-		log.debug "poll is sending ${cmds.inspect()}"
-		cmds
+	if (state.assoc != zwaveHubNodeId && secondsPast(state.associationQuery, 19 * 60)) {
+		log.debug "setting association"
+		cmds << zwave.associationV1.associationSet(groupingIdentifier:2, nodeId:zwaveHubNodeId).format()
+		cmds << secure(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+		cmds << zwave.associationV1.associationGet(groupingIdentifier:2).format()
+		cmds << "delay 6000"
+		cmds << secure(zwave.associationV1.associationGet(groupingIdentifier:1))
+		cmds << "delay 6000"
+		state.associationQuery = new Date().time
 	} else {
-		// workaround to keep polling from stopping due to lack of activity
-		sendEvent(descriptionText: "skipping poll", isStateChange: true, displayed: false)
-		null
+		// Only check lock state if it changed recently or we haven't had an update in an hour
+		def latest = device.currentState("lock")?.date?.time
+		if (!latest || !secondsPast(latest, 6 * 60) || secondsPast(state.lastPoll, 55 * 60)) {
+			cmds << secure(zwave.doorLockV1.doorLockOperationGet())
+			state.lastPoll = (new Date()).time
+		} else if (!state.MSR) {
+			cmds << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+		} else if (!state.fw) {
+			cmds << zwave.versionV1.versionGet().format()
+		} else if (!state.codes) {
+			state.pollCode = 1
+			cmds << secure(zwave.userCodeV1.usersNumberGet())
+		} else if (state.pollCode && state.pollCode <= state.codes) {
+			cmds << requestCode(state.pollCode)
+		} else if (!state.lastbatt || (new Date().time) - state.lastbatt > 53*60*60*1000) {
+			cmds << secure(zwave.batteryV1.batteryGet())
+		} else if (!state.enc) {
+			encryptCodes()
+			state.enc = 1
+		}
+	}
+	log.debug "poll is sending ${cmds.inspect()}"
+	device.activity()
+	cmds ?: null
+}
+
+private def encryptCodes() {
+	def keys = new ArrayList(state.keySet().findAll { it.startsWith("code") })
+	keys.each { key ->
+		def match = (key =~ /^code(\d+)$/)
+		if (match) try {
+			def keynum = match[0][1].toInteger()
+			if (keynum > 30 && !state[key]) {
+				state.remove(key)
+			} else if (state[key] && !state[key].startsWith("~")) {
+				log.debug "encrypting $key: ${state[key].inspect()}"
+				state[key] = encrypt(state[key])
+			}
+		} catch (java.lang.NumberFormatException e) { }
 	}
 }
 
@@ -651,7 +672,7 @@ private Boolean secondsPast(timestamp, seconds) {
 			return true
 		}
 	}
-	return (now() - timestamp) > (seconds * 1000)
+	return (new Date().time - timestamp) > (seconds * 1000)
 }
 
 private allCodesDeleted() {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -115,10 +115,6 @@ def strobe() {
 	]
 }
 
-def both() {
-	on()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/timevalve-gaslock-t-08/timevalve-smart.src/timevalve-smart.groovy

@@ -1,243 +0,0 @@
-metadata {
-        definition (name: "Timevalve Smart", namespace: "timevalve.gaslock.t-08", author: "ruinnel") {
-                capability "Valve"
-                capability "Refresh"
-                capability "Battery"
-                capability "Temperature Measurement"
-                
-                command "setRemaining"
-                command "setTimeout"
-                command "setTimeout10"
-                command "setTimeout20"
-                command "setTimeout30"
-                command "setTimeout40"
-                
-                command "remainingLevel"
-                
-                attribute "remaining", "number"
-                attribute "remainingText", "String"
-                attribute "timeout", "number"
-                
-                //raw desc : 0 0 0x1006 0 0 0 7 0x5E 0x86 0x72 0x5A 0x73 0x98 0x80
-                //fingerprint deviceId:"0x1006", inClusters:"0x5E, 0x86, 0x72, 0x5A, 0x73, 0x98, 0x80"
-        }
-
-        tiles (scale: 2) {
-        	multiAttributeTile(name:"statusTile", type:"generic", width:6, height:4) {
-            	tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
-	            	attributeState "open", label: '${name}', action: "close", icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-	            	attributeState "closed", label:'${name}', action: "", icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-    	        }
-                tileAttribute("device.remainingText", key: "SECONDARY_CONTROL") {
-	            	attributeState "open", label: '${currentValue}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-	            	attributeState "closed", label:'', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-    	        }
-            }
-            
-            standardTile("refreshTile", "command.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-                state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-            }
-            
-            controlTile("remainingSliderTile", "device.remaining", "slider", inactiveLabel: false, range:"(0..590)", height: 2, width: 4) {
-            	state "level", action:"remainingLevel"
-            }
-            valueTile("setRemaining", "device.remainingText", inactiveLabel: false, decoration: "flat", height: 2, width: 2){
-                state "remainingText", label:'${currentValue}\nRemaining'//, action: "setRemaining"//, icon: "st.Office.office6"
-            }
-
-            standardTile("setTimeout10", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'10Min', action: "setTimeout10", icon:"st.Health & Wellness.health7", defaultState: true
-                state "10", label:'10Min', action: "setTimeout10", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout20", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'20Min', action: "setTimeout20", icon:"st.Health & Wellness.health7", defaultState: true
-                state "20", label:'20Min', action: "setTimeout20", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout30", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'30Min', action: "setTimeout30", icon:"st.Health & Wellness.health7", defaultState: true
-                state "30", label:'30Min', action: "setTimeout30", icon:"st.Office.office13"
-            }
-            standardTile("setTimeout40", "device.remaining", inactiveLabel: false, decoration: "flat") {
-                state "default", label:'40Min', action: "setTimeout40", icon:"st.Health & Wellness.health7", defaultState: true
-                state "40", label:'40Min', action: "setTimeout40", icon:"st.Office.office13"
-            }
-
-            valueTile("batteryTile", "device.battery", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-                state "battery", label:'${currentValue}% battery', unit:""
-            }
-
-            main (["statusTile"])
-//            details (["statusTile", "remainingSliderTile", "setRemaining", "setTimeout10", "setTimeout20", "batteryTile", "refreshTile", "setTimeout30", "setTimeout40"])
-//            details (["statusTile", "batteryTile", "setRemaining", "refreshTile"])
-            details (["statusTile", "batteryTile", "refreshTile"])
-        }
-}
-
-def parse(description) {
-//	log.debug "parse - " + description
-	def result = null
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent(descriptionText: description, isStateChange: true)
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
-		if (cmd) {
-        	log.debug "parsed cmd = " + cmd
-			result = zwaveEvent(cmd)
-			//log.debug("'$description' parsed to $result")
-		} else {
-			log.debug("Couldn't zwave.parse '$description'")
-		}
-	}
-	return result
-}
-
-// 복호화 후 zwaveEvent() 호출
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	//log.debug "SecurityMessageEncapsulation - " + cmd
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x70: 1, 0x71: 1, 0x98: 1])
-	if (encapsulatedCommand) {
-		state.sec = 1
-        log.debug "encapsulatedCommand = " + encapsulatedCommand
-        zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	//log.debug "switch status - " + cmd.value
-    createEvent(name:"contact", value: cmd.value ? "open" : "closed")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-    def map = [ name: "battery", unit: "%" ]
-    if (cmd.batteryLevel == 0xFF) {  // Special value for low battery alert
-        map.value = 1
-        map.descriptionText = "${device.displayName} has a low battery"
-        map.isStateChange = true
-    } else {
-        map.value = cmd.batteryLevel
-    }
-    
-    log.debug "battery - ${map.value}${map.unit}"
-    // Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
-    state.lastbatt = new Date().time
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-  //log.debug "zwaveEvent - ${device.displayName}: ${cmd}"
-  createEvent(descriptionText: "${device.displayName}: ${cmd}")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	def result = []
-	log.info "zwave.configurationV1.configurationGet - " + cmd
-    def array = cmd.configurationValue
-    def value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
-    if (device.currentValue("contact") == "open") {
-    	value = ( (array[0] * 0x1000000) + (array[1] * 0x10000) + (array[2] * 0x100) + array[3] ).intdiv(60)
-    } else {
-    	value = 0
-    }
-    
-    if (device.currentValue('contact') == 'open') {
-    	def hour = value.intdiv(60);
-        def min = (value % 60).toString().padLeft(2, '0');
-        def text = "${hour}:${min}M"
-        
-        log.info "remain - " + text
-        result.add( createEvent(name: "remaining", value: value, displayed: false, isStateChange: true) )
-        result.add( createEvent(name: "remainingText", value: text, displayed: false, isStateChange: true) )
-    } else {
-    	result.add( createEvent(name: "timeout", value: value, displayed: false, isStateChange: true) )
-    }
-    return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def type = cmd.notificationType
-    if (type == cmd.NOTIFICATION_TYPE_HEAT) {
-    	log.info "NotificationReport - ${type}"
-        createEvent(name: "temperature", value: 999, unit: "C", descriptionText: "${device.displayName} is over heat!", displayed: true, isStateChange: true)
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	def type = cmd.alarmType
-    def level = cmd.alarmLevel
-    
-    log.info "AlarmReport - type : ${type}, level : ${level}"
-    def msg = "${device.displayName} is over heat!"
-    def result = createEvent(name: "temperature", value: 999, unit: "C", descriptionText: msg, displayed: true, isStateChange: true)
-    if (sendPushMessage) {
-    	sendPushMessage(msg)
-    }
-    return result
-}
-
-// remote open not allow
-def open() {}
-
-def close() {
-//	log.debug 'cmd - close()'
-    commands([
-        zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00),
-		zwave.switchBinaryV1.switchBinaryGet()
-	])
-}
-
-def setTimeout10() { setTimeout(10) }
-def setTimeout20() { setTimeout(20) }
-def setTimeout30() { setTimeout(30) }
-def setTimeout40() { setTimeout(40) }
-
-
-def setTimeout(value) {
-//	log.debug "setDefaultTime($value)"
-    commands([
-    	zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 4, scaledConfigurationValue: value * 60),
-        zwave.configurationV1.configurationGet(parameterNumber: 0x01)
-    ]);
-}
-
-def remainingLevel(value) {
-//	log.debug "remainingLevel($value)"
-    def hour = value.intdiv(60);
-    def min = (value % 60).toString().padLeft(2, '0');
-    def text = "${hour}:${min}M"
-    sendEvent(name: "remaining", value: value, displayed: false, isStateChange: true)
-    sendEvent(name: "remainingText", value: text, displayed: false, isStateChange: true)
-}
-
-def setRemaining() {
-	def remaining = device.currentValue("remaining")
-//	log.debug "setConfiguration() - remaining : $remaining"
-    commands([
-    	zwave.configurationV1.configurationSet(parameterNumber: 0x03, size: 4, scaledConfigurationValue: remaining * 60),
-        zwave.configurationV1.configurationGet(parameterNumber: 0x03)
-    ]);
-}
-
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec != 0 && !(cmd instanceof physicalgraph.zwave.commands.batteryv1.BatteryGet)) {
-    	log.debug "cmd = " + cmd + ", encapsulation"
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-    	log.debug "cmd = " + cmd + ", plain"
-		cmd.format()
-	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
-}
-
-def refresh() {
-//	log.debug 'cmd - refresh()'
-	commands([
-    			zwave.batteryV1.batteryGet(),
-                zwave.switchBinaryV1.switchBinaryGet(),
-                zwave.configurationV1.configurationGet(parameterNumber: 0x01),
-                zwave.configurationV1.configurationGet(parameterNumber: 0x03)
-        ], 400)
-}

smartapps/com-obycode/obything-music-connect.src/obything-music-connect.groovy

@@ -20,8 +20,7 @@ definition(
     description: "Use this free SmartApp in conjunction with the ObyThing Music app for your Mac to control and automate music and more with iTunes and SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "http://obycode.com/obything/ObyThingSTLogo.png",
-    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png",
-    singleInstance: true)
+    iconX2Url: "http://obycode.com/obything/ObyThingSTLogo@2x.png")
 
 
 preferences {

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -1,189 +0,0 @@
-/**
- *  Vinli Home Beta
- *
- *  Copyright 2015 Daniel
- *
- */
-definition(
-    name: "Vinli Home Connect",
-    namespace: "com.vinli.smartthings",
-    author: "Daniel",
-    description: "Allows Vinli users to connect their car to SmartThings",
-    category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_60.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/baeb2e5d-ebd0-49fe-a4ec-e92417ae20bb/images/vinli_oauth_120.png",
-    oauth: true)
-  
-preferences {
-  section ("Allow external service to control these things...") {
-    input "switches", "capability.switch", multiple: true, required: true
-    input "locks", "capability.lock", multiple: true, required: true
-  }
-}
-
-mappings {
-  
-  path("/devices") {
-    action: [
-      GET: "listAllDevices"
-    ]
-  }
-	
-  path("/switches") {
-    action: [
-      GET: "listSwitches"
-    ]
-  }
-  path("/switches/:command") {
-    action: [
-      PUT: "updateSwitches"
-    ]
-  }
-  path("/switches/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-   path("/locks/:command") {
-    action: [
-      PUT: "updateLocks"
-    ]
-  }
-  path("/locks/:id/:command") {
-    action: [
-      PUT: "updateLock"
-    ]
-  }
-  
-   path("/devices/:id/:command") {
-    action: [
-      PUT: "commandDevice"
-    ]
-  }
-}
-
-// returns a list of all devices
-def listAllDevices() {
-   	def resp = []
-   	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
-    }
-    
-    locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
-    }
-    return resp
-}
- 
-// returns a list like
-// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
-def listSwitches() {
-    def resp = []
-    switches.each {
-      resp << [name: it.displayName, value: it.currentValue("switch"), type: "switch", id: it.id]
-    }
-    return resp
-}
-
-void updateLocks() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        locks.each {
-            if (!it.hasCommand(command)) {
-                httpError(501, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        locks."$command"()
-    }
-}
-
-void updateLock() {
-    def command = params.command
-    
-    locks.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all lock specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitch() {
-    def command = params.command
-    
-    switches.each {
-      	if (!it.hasCommand(command)) {
-            httpError(400, "$command is not a valid command for all switches specified")
-        }
-        
-        if (it.id == params.id) {
-            it."$command"()
-        }
-    }
-}
-
-void commandDevice() {
-    def command = params.command
-    def devices = []
-    
-    switches.each {
-    	devices << it
-    }
-    
-    locks.each {
-    	devices << it
-    }
-    
-    devices.each {
-        if (it.id == params.id) {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for specified device")
-            }
-            it."$command"()
-        }
-    }
-}
-
-void updateSwitches() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    if (command) {
-
-        // check that the switch supports the specified command
-        // If not, return an error using httpError, providing a HTTP status code.
-        switches.each {
-            if (!it.hasCommand(command)) {
-                httpError(400, "$command is not a valid command for all switches specified")
-            } 
-        }
-        
-        // all switches have the comand
-        // execute the command on all switches
-        // (note we can do this on the array - the command will be invoked on every element
-        switches."$command"()
-    }
-}
-
- def installed() {
-	log.debug "Installed with settings: ${settings}"
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -22,8 +22,7 @@ definition(
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-    oauth: true,
-    singleInstance: true
+    oauth: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/initialstate-events/initial-state-event-streamer.src/initial-state-event-streamer.groovy

@@ -1,7 +1,7 @@
 /**
  *  Initial State Event Streamer
  *
- *  Copyright 2016 David Sulpy
+ *  Copyright 2015 David Sulpy
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,9 +11,9 @@
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
- *
+ *  
  *  SmartThings data is sent from this SmartApp to Initial State. This is event data only for
- *  devices for which the user has authorized. Likewise, Initial State's services call this
+ *  devices for which the user has authorized. Likewise, Initial State's services call this 
  *  SmartApp on the user's behalf to configure Initial State specific parameters. The ToS and
  *  Privacy Policy for Initial State can be found here: https://www.initialstate.com/terms
  */
@@ -77,62 +77,6 @@ mappings {
 	}
 }
 
-def getAccessKey() {
-	log.trace "get access key"
-	if (atomicState.accessKey == null) {
-		httpError(404, "Access Key Not Found")
-	} else {
-		[
-			accessKey: atomicState.accessKey
-		]
-	}
-}
-
-def getBucketKey() {
-	log.trace "get bucket key"
-	if (atomicState.bucketKey == null) {
-		httpError(404, "Bucket key Not Found")
-	} else {
-		[
-			bucketKey: atomicState.bucketKey,
-			bucketName: atomicState.bucketName
-		]
-	}
-}
-
-def setBucketKey() {
-	log.trace "set bucket key"
-	def newBucketKey = request.JSON?.bucketKey
-	def newBucketName = request.JSON?.bucketName
-
-	log.debug "bucket name: $newBucketName"
-	log.debug "bucket key: $newBucketKey"
-
-	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
-		atomicState.bucketKey = "$newBucketKey"
-		atomicState.bucketName = "$newBucketName"
-		atomicState.isBucketCreated = false
-	}
-
-	tryCreateBucket()
-}
-
-def setAccessKey() {
-	log.trace "set access key"
-	def newAccessKey = request.JSON?.accessKey
-	def newGrokerSubdomain = request.JSON?.grokerSubdomain
-
-	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
-		atomicState.grokerSubdomain = "$newGrokerSubdomain"
-		atomicState.isBucketCreated = false
-	}
-
-	if (newAccessKey && newAccessKey != atomicState.accessKey) {
-		atomicState.accessKey = "$newAccessKey"
-		atomicState.isBucketCreated = false
-	}
-}
-
 def subscribeToEvents() {
 	if (accelerometers != null) {
 		subscribe(accelerometers, "acceleration", genericHandler)
@@ -146,7 +90,7 @@ def subscribeToEvents() {
 	if (beacons != null) {
 		subscribe(beacons, "presence", genericHandler)
 	}
-
+	
 	if (cos != null) {
 		subscribe(cos, "carbonMonoxide", genericHandler)
 	}
@@ -225,27 +169,85 @@ def subscribeToEvents() {
 	}
 }
 
+def getAccessKey() {
+	log.trace "get access key"
+	if (atomicState.accessKey == null) {
+		httpError(404, "Access Key Not Found")
+	} else {
+		[
+			accessKey: atomicState.accessKey
+		]
+	}
+}
+
+def getBucketKey() {
+	log.trace "get bucket key"
+	if (atomicState.bucketKey == null) {
+		httpError(404, "Bucket key Not Found")
+	} else {
+		[
+			bucketKey: atomicState.bucketKey,
+			bucketName: atomicState.bucketName
+		]
+	}
+}
+
+def setBucketKey() {
+	log.trace "set bucket key"
+	def newBucketKey = request.JSON?.bucketKey
+	def newBucketName = request.JSON?.bucketName
+
+	log.debug "bucket name: $newBucketName"
+	log.debug "bucket key: $newBucketKey"
+
+	if (newBucketKey && (newBucketKey != atomicState.bucketKey || newBucketName != atomicState.bucketName)) {
+		atomicState.bucketKey = "$newBucketKey"
+		atomicState.bucketName = "$newBucketName"
+		atomicState.isBucketCreated = false
+	}
+
+	tryCreateBucket()
+}
+
+def setAccessKey() {
+	log.trace "set access key"
+	def newAccessKey = request.JSON?.accessKey
+	def newGrokerSubdomain = request.JSON?.grokerSubdomain
+
+	if (newGrokerSubdomain && newGrokerSubdomain != "" && newGrokerSubdomain != atomicState.grokerSubdomain) {
+		atomicState.grokerSubdomain = "$newGrokerSubdomain"
+		atomicState.isBucketCreated = false
+	}
+    
+	if (newAccessKey && newAccessKey != atomicState.accessKey) {
+		atomicState.accessKey = "$newAccessKey"
+		atomicState.isBucketCreated = false
+	}
+}
+
 def installed() {
-	atomicState.version = "1.1.0"
-
-	atomicState.isBucketCreated = false
-	atomicState.grokerSubdomain = "groker"
-
+	atomicState.version = "1.0.18"
 	subscribeToEvents()
 
 	atomicState.isBucketCreated = false
 	atomicState.grokerSubdomain = "groker"
+	atomicState.eventBuffer = []
+
+	runEvery15Minutes(flushBuffer)
 
 	log.debug "installed (version $atomicState.version)"
 }
 
 def updated() {
-	atomicState.version = "1.1.0"
+	atomicState.version = "1.0.18"
 	unsubscribe()
 
 	if (atomicState.bucketKey != null && atomicState.accessKey != null) {
 		atomicState.isBucketCreated = false
 	}
+	if (atomicState.eventBuffer == null) {
+		atomicState.eventBuffer = []
+	}
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		atomicState.grokerSubdomain = "groker"
 	}
@@ -260,7 +262,7 @@ def uninstalled() {
 }
 
 def tryCreateBucket() {
-
+	
 	// can't ship events if there is no grokerSubdomain
 	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		log.error "streaming url is currently null"
@@ -325,40 +327,60 @@ def genericHandler(evt) {
 	eventHandler(key, value)
 }
 
-def eventHandler(name, value) {
-	def epoch = now() / 1000
-
-	def event = new JsonSlurper().parseText("{\"key\": \"$name\", \"value\": \"$value\", \"epoch\": \"$epoch\"}")
-
-	tryShipEvents(event)
-	
-	log.debug "Shipped Event: " + event
+// This is a handler function for flushing the event buffer
+// after a specified amount of time to reduce the load on ST servers
+def flushBuffer() {
+	log.trace "About to flush the buffer on schedule"
+	if (atomicState.eventBuffer != null && atomicState.eventBuffer.size() > 0) {
+		tryShipEvents()
+	}
 }
 
-def tryShipEvents(event) {
+def eventHandler(name, value) {
+	log.debug atomicState.eventBuffer
+
+	def eventBuffer = atomicState.eventBuffer
+	def epoch = now() / 1000
+	
+	// if for some reason this code block is being run
+	// but the SmartApp wasn't propery setup during install
+	// we need to set initialize the eventBuffer.
+	if (!atomicState.eventBuffer) {
+		atomicState.eventBuffer = []
+	}
+	eventBuffer << [key: "$name", value: "$value", epoch: "$epoch"]
+	
+	log.debug eventBuffer
+
+	atomicState.eventBuffer = eventBuffer
+
+	if (eventBuffer.size() >= 10) {
+		tryShipEvents()
+	}
+}
+
+// a helper function for shipping the atomicState.eventBuffer to Initial State
+def tryShipEvents() {
 
-	def grokerSubdomain = atomicState.grokerSubdomain
 	// can't ship events if there is no grokerSubdomain
-	if (grokerSubdomain == null || grokerSubdomain == "") {
+	if (atomicState.grokerSubdomain == null || atomicState.grokerSubdomain == "") {
 		log.error "streaming url is currently null"
 		return
 	}
-	def accessKey = atomicState.accessKey
-	def bucketKey = atomicState.bucketKey
 	// can't ship if access key and bucket key are null, so finish trying
-	if (accessKey == null || bucketKey == null) {
+	if (atomicState.accessKey == null || atomicState.bucketKey == null) {
 		return
 	}
 
 	def eventPost = [
-		uri: "https://${grokerSubdomain}.initialstate.com/api/events",
+		uri: "https://${atomicState.grokerSubdomain}.initialstate.com/api/events",
 		headers: [
 			"Content-Type": "application/json",
-			"X-IS-BucketKey": "${bucketKey}",
-			"X-IS-AccessKey": "${accessKey}",
+			"X-IS-BucketKey": "${atomicState.bucketKey}",
+			"X-IS-AccessKey": "${atomicState.accessKey}",
 			"Accept-Version": "0.0.2"
 		],
-		body: event
+		body: atomicState.eventBuffer
 	]
 
 	try {
@@ -367,10 +389,13 @@ def tryShipEvents(event) {
 			log.debug "shipped events and got ${resp.status}"
 			if (resp.status >= 400) {
 				log.error "shipping failed... ${resp.data}"
+			} else {
+				// clear the buffer
+				atomicState.eventBuffer = []
 			}
 		}
 	} catch (e) {
 		log.error "shipping events failed: $e"
 	}
-
+	
 }

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -13,11 +13,11 @@ definition(
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/jawbone-up@2x.png",
 	oauth: true,
-    usePreferencesForAuthorization: false,
-    singleInstance: true
+    usePreferencesForAuthorization: false
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
+	appSetting "serverUrl"
 }
 
 preferences {
@@ -28,13 +28,16 @@ mappings {
 	path("/receivedToken") { action: [ POST: "receivedToken", GET: "receivedToken"] }
 	path("/receiveToken") { action: [ POST: "receiveToken", GET: "receiveToken"] }
 	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
-    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}    
 	path("/oauth/callback") { action: [ GET: "callback" ] }
 }
 
-def getServerUrl() { return "https://graph.api.smartthings.com" }
-def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
-def buildRedirectUrl(page) { return buildActionUrl(page) }
+def getSmartThingsClientId() {
+   return appSettings.clientId
+}
+
+def getSmartThingsClientSecret() {
+   return appSettings.clientSecret
+}
 
 def callback() {
 	def redirectUrl = null
@@ -60,8 +63,9 @@ def callback() {
 				// SmartThings code, which we ignore, as we don't need to exchange for an access token.
 				// Instead, go initiate the Jawbone OAuth flow.
 				log.debug "Executing callback redirect to auth page"
+			    def stcid = getSmartThingsClientId()
 			    state.oauthInitState = UUID.randomUUID().toString()
-			    def oauthParams = [response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
+			    def oauthParams = [response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback"]
 				redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
 			}
 		} else {
@@ -80,11 +84,10 @@ def authPage() {
 			createAccessToken()
 		}
         description = "Click to enter Jawbone Credentials"
-        def redirectUrl = buildRedirectUrl
-        log.debug "RedirectURL = ${redirectUrl}"
-        def donebutton= state.JawboneAccessToken != null 
-        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install: donebutton) {
-               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", state: hast ,description:description }
+        def redirectUrl = oauthInitUrl()
+        // log.debug "RedirectURL = ${redirectUrl}"
+        return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install:false) {
+               section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", description:description }
         }
     } else {
         description = "Jawbone Credentials Already Entered." 
@@ -96,14 +99,17 @@ def authPage() {
 
 def oauthInitUrl() {
     log.debug "oauthInitUrl"
+    def stcid = getSmartThingsClientId()
     state.oauthInitState = UUID.randomUUID().toString()
-    def oauthParams = [ response_type: "code", client_id: appSettings.clientId, scope: "move_read sleep_read", redirect_uri: "${serverUrl}/oauth/callback" ]
-	redirect(location: "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}")
+    def oauthParams = [ response_type: "code", client_id: stcid, scope: "move_read sleep_read", redirect_uri: buildRedirectUrl("receiveToken") ]
+	return "https://jawbone.com/auth/oauth2/auth?${toQueryString(oauthParams)}"
 }
 
 def receiveToken(redirectUrl = null) {
 	log.debug "receiveToken"
-    def oauthParams = [ client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "authorization_code", code: params.code ]
+    def stcid = getSmartThingsClientId()
+    def oauthClientSecret = getSmartThingsClientSecret()
+    def oauthParams = [ client_id: stcid, client_secret: oauthClientSecret, grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}",
     ]
@@ -225,10 +231,18 @@ String toQueryString(Map m) {
 	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
 }
 
+def getServerUrl() { return appSettings.serverUrl ?: "https://graph.api.smartthings.com" }
+
+def buildRedirectUrl(page) {
+    // log.debug "buildRedirectUrl"
+    // /api/token/:st_token/smartapps/installations/:id/something
+    return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
+}
+
 def validateCurrentToken() {
 	log.debug "validateCurrentToken"
     def url = "https://jawbone.com/nudge/api/v.1.1/users/@me/refreshToken"
-    def requestBody = "secret=${appSettings.clientSecret}"
+    def requestBody = "secret=${getSmartThingsClientSecret()}"
 	
 	try {
 		httpPost(uri: url, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],  body: requestBody) {response ->
@@ -242,7 +256,9 @@ def validateCurrentToken() {
         if (e.statusCode == 401) { // token is expired
         	log.debug "Access token is expired"
         	if (state.refreshToken) { // if we have this we are okay
-    			def oauthParams = [client_id: appSettings.clientId, client_secret: appSettings.clientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
+            	def stcid = getSmartThingsClientId()
+    			def oauthClientSecret = getSmartThingsClientSecret()
+    			def oauthParams = [client_id: stcid, client_secret: oauthClientSecret, grant_type: "refresh_token", refresh_token: state.refreshToken]
         		def tokenUrl = "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}"
         		def params = [
           			uri: tokenUrl
@@ -271,10 +287,9 @@ def validateCurrentToken() {
 }
 
 def initialize() {
-    log.debug "Callback URL - Webhook"  
-	def localServerUrl = getApiServerUrl() 
-	def hookUrl = "${localServerUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
-    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"      
+	def hookUrl = "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
+    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"
+    log.debug "Callback URL: $webhook"        
 	httpPost(uri: webhook, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ])
 }
 
@@ -312,6 +327,7 @@ def setup() {
 }
 
 def installed() {
+	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -324,6 +340,7 @@ def installed() {
 }
 
 def updated() {
+	enableCallback()
 	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
@@ -482,4 +499,4 @@ def hookEventHandler() {
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
-}
+}

smartapps/lock-auto-super-enhanced/enhanced-auto-lock-door.src/enhanced-auto-lock-door.groovy

@@ -13,7 +13,7 @@ preferences{
         input "lock1", "capability.lock", required: true
     }
     section("Select the door contact sensor:") {
-        input "contact", "capability.contactSensor", required: true
+    	input "contact", "capability.contactSensor", required: true
     }   
     section("Automatically lock the door when closed...") {
         input "minutesLater", "number", title: "Delay (in minutes):", required: true
@@ -22,10 +22,9 @@ preferences{
         input "secondsLater", "number", title: "Delay (in seconds):", required: true
     }
     section( "Notifications" ) {
-        input("recipients", "contact", title: "Send notifications to", required: false) {
-            input "phoneNumber", "phone", title: "Warn with text message (optional)", description: "Phone Number", required: false
-        }
-    }
+		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes", "No"]], required: false
+		input "phoneNumber", "phone", title: "Enter phone number to send text notification.", required: false
+	}
 }
 
 def installed(){
@@ -43,73 +42,55 @@ def initialize(){
     subscribe(lock1, "lock", doorHandler, [filterEvents: false])
     subscribe(lock1, "unlock", doorHandler, [filterEvents: false])  
     subscribe(contact, "contact.open", doorHandler)
-    subscribe(contact, "contact.closed", doorHandler)
+	subscribe(contact, "contact.closed", doorHandler)
 }
 
 def lockDoor(){
     log.debug "Locking the door."
     lock1.lock()
-    if(location.contactBookEnabled) {
-        if ( recipients ) {
-            log.debug ( "Sending Push Notification..." ) 
-            sendNotificationToContacts( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!", recipients)
-        }
-    }
-    if (phoneNumber) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!")
-    }
+    log.debug ( "Sending Push Notification..." ) 
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
+    log.debug("Sending text message...")
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} locked after ${contact} was closed for ${minutesLater} minutes!" )
 }
 
 def unlockDoor(){
     log.debug "Unlocking the door."
     lock1.unlock()
-    if(location.contactBookEnabled) {
-        if ( recipients ) {
-            log.debug ( "Sending Push Notification..." ) 
-            sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!", recipients)
-        }
-    }
-    if ( phoneNumber ) {
-        log.debug("Sending text message...")
-        sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!")
-    }
+    log.debug ( "Sending Push Notification..." ) 
+    if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
+    log.debug("Sending text message...")
+    if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened for ${secondsLater} seconds!" )
 }
 
 def doorHandler(evt){
     if ((contact.latestValue("contact") == "open") && (evt.value == "locked")) { // If the door is open and a person locks the door then...  
-        //def delay = (secondsLater) // runIn uses seconds
-        runIn( secondsLater, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
+        def delay = (secondsLater) // runIn uses seconds
+        runIn( delay, unlockDoor )   // ...schedule (in minutes) to unlock...  We don't want the door to be closed while the lock is engaged. 
     }
     else if ((contact.latestValue("contact") == "open") && (evt.value == "unlocked")) { // If the door is open and a person unlocks it then...
         unschedule( unlockDoor ) // ...we don't need to unlock it later.
-    }
+	}
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "locked")) { // If the door is closed and a person manually locks it then...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }   
     else if ((contact.latestValue("contact") == "closed") && (evt.value == "unlocked")) { // If the door is closed and a person unlocks it then...
-       //def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
+        def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "open")) { // If a person opens an unlocked door...
         unschedule( lockDoor ) // ...we don't need to lock it later.
     }
     else if ((lock1.latestValue("lock") == "unlocked") && (evt.value == "closed")) { // If a person closes an unlocked door...
-        //def delay = (minutesLater * 60) // runIn uses seconds
-        runIn( (minutesLater * 60), lockDoor ) // ...schedule (in minutes) to lock.
-    }
+        def delay = (minutesLater * 60) // runIn uses seconds
+        runIn( delay, lockDoor ) // ...schedule (in minutes) to lock.
+	}
     else { //Opening or Closing door when locked (in case you have a handle lock)
-        log.debug "Unlocking the door."
-        lock1.unlock()
-        if(location.contactBookEnabled) {
-            if ( recipients ) {
-                log.debug ( "Sending Push Notification..." ) 
-                sendNotificationToContacts( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!", recipients)
-            }
-        }
-        if ( phoneNumber ) {
-            log.debug("Sending text message...")
-            sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!")
-        }
-    }
+    	log.debug "Unlocking the door."
+		lock1.unlock()
+        log.debug ( "Sending Push Notification..." ) 
+    	if ( sendPushMessage != "No" ) sendPush( "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
+        log.debug("Sending text message...")
+    	if ( phoneNumber != "0" ) sendSms( phoneNumber, "${lock1} unlocked after ${contact} was opened or closed when ${lock1} was locked!" )
+		}
 }

smartapps/macstainless/lights-on-when-door-opens-after-sundown.src/lights-on-when-door-opens-after-sundown.groovy

@@ -0,0 +1,53 @@
+/**
+ *
+ *  Lights On When Door Open After Sundown
+ *
+ *  Based on "Turn It On When It Opens" by SmartThings
+ *
+ *  Author: Aaron Crocco
+ */
+preferences {
+	section("When the door opens..."){
+		input "contact1", "capability.contactSensor", title: "Where?"
+	}
+	section("Turn on these lights..."){
+		input "switches", "capability.switch", multiple: true
+	}
+	section("and change mode to...") {
+		input "HomeAfterDarkMode", "mode", title: "Mode?"
+	}
+}
+
+
+def installed()
+{
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def updated()
+{
+	unsubscribe()
+	subscribe(contact1, "contact.open", contactOpenHandler)
+}
+
+def contactOpenHandler(evt) {
+	log.debug "$evt.value: $evt, $settings"
+	
+	//Check current time to see if it's after sundown.
+	def s = getSunriseAndSunset(zipCode: zipCode, sunriseOffset: sunriseOffset, sunsetOffset: sunsetOffset)
+	def now = new Date()
+	def setTime = s.sunset
+	log.debug "Sunset is at $setTime. Current time is $now"
+        
+        
+    if (setTime.before(now)) {	//Executes only if it's after sundown.
+			
+		log.trace "Turning on switches: $switches"
+		switches.on()
+		log.trace "Changing house mode to $HomeAfterDarkMode"
+        setLocationMode(HomeAfterDarkMode)
+        sendPush("Welcome home! Changing mode to $HomeAfterDarkMode.")
+
+	}   
+}
+

smartapps/mager/weather-underground-pws-connect.src/weather-underground-pws-connect.groovy

@@ -26,8 +26,7 @@ definition(
     iconUrl: "http://i.imgur.com/HU0ANBp.png",
     iconX2Url: "http://i.imgur.com/HU0ANBp.png",
     iconX3Url: "http://i.imgur.com/HU0ANBp.png",
-    oauth: true,
-    singleInstance: true)
+    oauth: true)
 
 
 preferences {

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -1,389 +0,0 @@
-/**
- *  Required PlantLink Connector
- *  This SmartApp forwards the raw data of the deviceType to myplantlink.com
- *  and returns it back to your device after calculating soil and plant type.
- *
- *  Copyright 2015 Oso Technologies
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-import groovy.json.JsonBuilder
-import java.util.regex.Matcher
-import java.util.regex.Pattern
- 
-definition(
-    name: "PlantLink Connector",
-    namespace: "Osotech",
-    author: "Oso Technologies",
-    description: "This SmartApp connects to myplantlink.com and forwards the device data to it so it can calculate easy to read plant status for your specific plant's needs.",
-    category:  "Convenience",
-    iconUrl:   "https://dashboard.myplantlink.com/images/apple-touch-icon-76x76-precomposed.png",
-    iconX2Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-120x120-precomposed.png",
-    iconX3Url: "https://dashboard.myplantlink.com/images/apple-touch-icon-152x152-precomposed.png"
-) {
-    appSetting "client_id"
-    appSetting "client_secret"
-    appSetting "https_plantLinkServer"
-}
-
-preferences {
-    page(name: "auth", title: "Step 1 of 2", nextPage:"deviceList", content:"authPage")
-    page(name: "deviceList", title: "Step 2 of 2", install:true, uninstall:false){
-        section {
-            input "plantlinksensors", "capability.sensor", title: "Select PlantLink sensors", multiple: true
-        }
-    }
-}
-
-mappings {
-    path("/swapToken") {
-        action: [
-                GET: "swapToken"
-        ]
-    }
-}
-
-def authPage(){
-    if(!atomicState.accessToken){
-        createAccessToken()
-        atomicState.accessToken = state.accessToken
-    }
-
-	def redirectUrl = oauthInitUrl()
-    def uninstallAllowed = false
-    def oauthTokenProvided = false
-    if(atomicState.authToken){
-        uninstallAllowed = true
-        oauthTokenProvided = true
-    }
-
-    if (!oauthTokenProvided) {
-        return dynamicPage(name: "auth", title: "Step 1 of 2", nextPage:null, uninstall:uninstallAllowed) {
-            section(){
-                href(name:"login",
-                     url:redirectUrl, 
-                     style:"embedded",
-                     title:"PlantLink", 
-                     image:"https://dashboard.myplantlink.com/images/PLlogo.png", 
-                     description:"Tap to login to myplantlink.com")
-            }
-        }
-    }else{
-        return dynamicPage(name: "auth", title: "Step 1 of 2 - Completed", nextPage:"deviceList", uninstall:uninstallAllowed) {
-	        section(){
-               paragraph "You are logged in to myplantlink.com, tap next to continue", image: iconUrl
- 			   href(url:redirectUrl, title:"Or", description:"tap to switch accounts")
-            }
-        }
-    }
-}
-
-def installed() {
-    log.debug "Installed with settings: ${settings}"
-    initialize()
-}
-
-def updated() {
-    log.debug "Updated with settings: ${settings}"
-    unsubscribe()
-    initialize()
-}
-
-def uninstalled() {
-    if (plantlinksensors){
-        plantlinksensors.each{ sensor_device ->
-            sensor_device.setInstallSmartApp("needSmartApp")
-        }
-    }
-}
-
-def initialize() {
-    atomicState.attached_sensors = [:]
-    if (plantlinksensors){
-        subscribe(plantlinksensors, "moisture_status", moistureHandler)
-        subscribe(plantlinksensors, "battery_status", batteryHandler)
-        plantlinksensors.each{ sensor_device ->
-            sensor_device.setStatusIcon("Waiting on First Measurement")
-            sensor_device.setInstallSmartApp("connectedToSmartApp")
-        }
-    }
-}
-
-def dock_sensor(device_serial, expected_plant_name) {
-    def docking_body_json_builder = new JsonBuilder([version: '1c', smartthings_device_id: device_serial])
-    def docking_params = [
-            uri        : appSettings.https_plantLinkServer,
-            path       : "/api/v1/smartthings/links",
-            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-            contentType: "application/json",
-            body: docking_body_json_builder.toString()
-    ]
-    def plant_post_body_map = [
-            plant_type_key: 999999,
-            soil_type_key : 1000004
-    ]
-    def plant_post_params = [
-            uri        : appSettings.https_plantLinkServer,
-            path       : "/api/v1/plants",
-            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-            contentType: "application/json",
-    ]
-    log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
-    httpPost(docking_params) { docking_response ->
-        if (parse_api_response(docking_response, "Docking a link")) {
-            if (docking_response.data.plants.size() == 0) {
-                log.debug "creating plant for - ${expected_plant_name}"
-                plant_post_body_map["name"] = expected_plant_name
-                plant_post_body_map['links_key'] = [docking_response.data.key]
-                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
-                plant_post_params["body"] = plant_post_body_json_builder.toString()
-                httpPost(plant_post_params) { plant_post_response ->
-                    if(parse_api_response(plant_post_response, 'creating plant')){
-                        def attached_map = atomicState.attached_sensors
-                        attached_map[device_serial] = plant_post_response.data
-                        atomicState.attached_sensors = attached_map
-                    }
-                }
-            } else {
-                def plant = docking_response.data.plants[0]
-                def attached_map = atomicState.attached_sensors
-                attached_map[device_serial] = plant
-                atomicState.attached_sensors = attached_map
-                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
-            }
-        }
-    }
-    return true
-}
-
-def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
-    def plant_put_params = [
-		uri : appSettings.https_plantLinkServer,
-        headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        contentType : "application/json"
-    ]
-    if (plant.name != expected_plant_name) {
-        log.debug "updating plant for - ${expected_plant_name}"
-        plant_put_params["path"] = "/api/v1/plants/${plant.key}"
-        def plant_put_body_map = [
-			name: expected_plant_name
-        ]
-        def plant_put_body_json_builder = new JsonBuilder(plant_put_body_map)
-        plant_put_params["body"] = plant_put_body_json_builder.toString()
-        httpPut(plant_put_params) { plant_put_response ->
-            parse_api_response(plant_put_response, 'updating plant name')
-        }
-    }
-}
-
-def moistureHandler(event){
-    def expected_plant_name = "SmartThings - ${event.displayName}"
-    def device_serial = getDeviceSerialFromEvent(event)
-    
-    if (!atomicState.attached_sensors.containsKey(device_serial)){
-        dock_sensor(device_serial, expected_plant_name)
-    }else{
-        def measurement_post_params = [
-                uri: appSettings.https_plantLinkServer,
-                path: "/api/v1/smartthings/links/${device_serial}/measurements",
-                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-                contentType: "application/json",
-                body: event.value
-        ]
-        httpPost(measurement_post_params) { measurement_post_response ->
-            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
-                    measurement_post_response.data.size() >0){
-                def measurement = measurement_post_response.data[0]
-                def plant =  measurement.plant
-                log.debug plant
-                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
-                plantlinksensors.each{ sensor_device ->
-                    if (sensor_device.id == event.deviceId){
-                        sensor_device.setStatusIcon(plant.status)
-                        if (plant.last_measurements && plant.last_measurements[0].moisture){
-                            sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
-                        }
-                        if (plant.last_measurements && plant.last_measurements[0].battery){
-                            sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
-                        }
-                    }
-                }
-            }
-        }
-    }
-}
-
-def batteryHandler(event){
-    def expected_plant_name = "SmartThings - ${event.displayName}"
-    def device_serial = getDeviceSerialFromEvent(event)
-    
-    if (!atomicState.attached_sensors.containsKey(device_serial)){
-        dock_sensor(device_serial, expected_plant_name)
-    }else{
-        def measurement_post_params = [
-                uri: appSettings.https_plantLinkServer,
-                path: "/api/v1/smartthings/links/${device_serial}/measurements",
-                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-                contentType: "application/json",
-                body: event.value
-        ]
-        httpPost(measurement_post_params) { measurement_post_response ->
-            parse_api_response(measurement_post_response, 'creating battery measurement')
-        }
-    }
-}
-
-def getDeviceSerialFromEvent(event){
-    def pattern = /.*"zigbeedeviceid"\s*:\s*"(\w+)".*/
-    def match_result = (event.value =~ pattern)
-    return match_result[0][1]
-}
-
-def oauthInitUrl(){
-	atomicState.oauthInitState = UUID.randomUUID().toString()
-    def oauthParams = [
-            response_type: "code",
-            client_id: appSettings.client_id,
-            state: atomicState.oauthInitState,
-            redirect_uri: buildRedirectUrl()
-    ]
-    return appSettings.https_plantLinkServer + "/oauth/oauth2/authorize?" + toQueryString(oauthParams)
-}
-
-def buildRedirectUrl(){
-    return getServerUrl() + "/api/token/${atomicState.accessToken}/smartapps/installations/${app.id}/swapToken"
-}
-
-def swapToken(){
-    def code = params.code
-    def oauthState = params.state
-    def stcid = appSettings.client_id
-    def postParams = [
-            method: 'POST',
-            uri: "https://oso-tech.appspot.com",
-            path: "/api/v1/oauth-token",
-            query: [grant_type:'authorization_code', code:params.code, client_id:stcid,
-                    client_secret:appSettings.client_secret, redirect_uri: buildRedirectUrl()],
-    ]
-
-    def jsonMap
-    httpPost(postParams) { resp ->
-        jsonMap = resp.data
-    }
-
-    atomicState.refreshToken = jsonMap.refresh_token
-    atomicState.authToken = jsonMap.access_token
-
-    def html = """
-<html>
-<head>
-<meta name="viewport" content="width=device-width, initial-scale=1">
-<style>
-	.container {
-		padding:25px;
-	}
-	.flex1 {
-    	width:33%;
-		float:left;
-		text-align: center;
-	}
-	p {
-		font-size: 2em;
-		font-family: Verdana, Geneva, sans-serif;
-		text-align: center;
-		color: #777;
-	}
-</style>
-</head>
-<body>
-	<div class="container">
-		<div class="flex1"><img src="https://dashboard.myplantlink.com/images/PLlogo.png" alt="PlantLink" height="75"/></div>
-		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected to"  height="25" style="padding-top:25px;" /></div>
-		<div class="flex1"><img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings" height="75"/></div>
-		<br clear="all">
-  </div>
-  <div class="container">
-		<p>Your PlantLink Account is now connected to SmartThings!</p>
-		<p style="color:green;">Click <strong>Done</strong> at the top right to finish setup.</p>
-	</div>
-</body>
-</html>
-"""
-    render contentType: 'text/html', data: html
-}
-
-private refreshAuthToken() {
-    def stcid = appSettings.client_id
-    def refreshParams = [
-            method: 'POST',
-            uri: "https://hardware-dot-oso-tech.appspot.com",
-            path: "/api/v1/oauth-token",
-            query: [grant_type:'refresh_token', code:"${atomicState.refreshToken}", client_id:stcid,
-                    client_secret:appSettings.client_secret],
-    ]
-    try{
-        def jsonMap
-        httpPost(refreshParams) { resp ->
-            if(resp.status == 200){
-                log.debug "OAuth Token refreshed"
-                jsonMap = resp.data
-                if (resp.data) {
-                    atomicState.refreshToken = resp?.data?.refresh_token
-                    atomicState.authToken = resp?.data?.access_token
-                    if (data?.action && data?.action != "") {
-                        log.debug data.action
-                        "{data.action}"()
-                        data.action = ""
-                    }
-                }
-                data.action = ""
-            }else{
-                log.debug "refresh failed ${resp.status} : ${resp.status.code}"
-            }
-        }
-    }
-    catch(Exception e){
-        log.debug "caught exception refreshing auth token: " + e
-    }
-}
-
-def parse_api_response(resp, message) {
-    if (resp.status == 200) {
-        return true
-    } else {
-        log.error "sent ${message} Json & got http status ${resp.status} - ${resp.status.code}"
-        if (resp.status == 401) {
-            refreshAuthToken()
-            return false
-        } else {
-            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.", true)
-            return false
-        }
-    }
-}
-
-def getServerUrl() { 
-	return "https://graph.api.smartthings.com" 
-}
-
-def debugEvent(message, displayEvent) {
-    def results = [
-            name: "appdebug",
-            descriptionText: message,
-            displayed: displayEvent
-    ]
-    log.debug "Generating AppDebug Event: ${results}"
-    sendEvent (results)
-}
-
-def toQueryString(Map m){
-    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
-}

smartapps/smart-auto-lock-/-unlock/smart-auto-lock-unlock.src/smart-auto-lock-unlock.groovy

@@ -14,8 +14,8 @@
  *
  */
 definition(
-    name: "Smart Auto Lock / Unlock",
-    namespace: "smart-auto-lock-unlock",
+    name: "Smart Lock / Unlock",
+    namespace: "",
     author: "Arnaud",
     description: "Automatically locks door X minutes after being closed and keeps door unlocked if door is open.",
     category: "Safety & Security",

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -21,8 +21,7 @@
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    singleInstance: true
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
 preferences {

smartapps/smartthings/bose-soundtouch-control.src/bose-soundtouch-control.groovy

@@ -1,341 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Bose® SoundTouch® Control
- *
- *  Author: SmartThings & Joe Geiger
- *
- *  Date: 2015-30-09
- */
-definition(
-    name: "Bose® SoundTouch® Control",
-    namespace: "smartthings",
-    author: "SmartThings & Joe Geiger",
-    description: "Control your Bose® SoundTouch® when certain actions take place in your home.",
-    category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png"
-)
-
-preferences {
-	page(name: "mainPage", title: "Control your Bose® SoundTouch® when something happens", install: true, uninstall: true)
-	page(name: "timeIntervalInput", title: "Only during a certain time") {
-		section {
-			input "starting", "time", title: "Starting", required: false
-			input "ending", "time", title: "Ending", required: false
-		}
-	}
-}
-
-def mainPage() {
-	dynamicPage(name: "mainPage") {
-		def anythingSet = anythingSet()
-		if (anythingSet) {
-			section("When..."){
-				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
-				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
-				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
-				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
-				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
-			}
-		}
-		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
-			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
-			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
-			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
-			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
-			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
-			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
-			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
-			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
-			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
-			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
-			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
-			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
-		}
-		section("Perform this action"){
-			input "actionType", "enum", title: "Action?", required: true, defaultValue: "play", options: [
-				"Turn On & Play",
-				"Turn Off",
-				"Toggle Play/Pause",
-				"Skip to Next Track",
-				"Skip to Beginning/Previous Track",
-                "Play Preset 1",
-                "Play Preset 2",
-                "Play Preset 3",
-                "Play Preset 4",
-                "Play Preset 5",
-                "Play Preset 6"
-			]
-		}
-		section {
-			input "bose", "capability.musicPlayer", title: "Bose® SoundTouch® music player", required: true
-		}
-		section("More options", hideable: true, hidden: true) {
-			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false
-			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
-			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
-			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
-				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
-			if (settings.modes) {
-            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
-            }
-			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
-		}
-		section([mobileOnly:true]) {
-			label title: "Assign a name", required: false
-			mode title: "Set for specific mode(s)"
-		}
-	}
-}
-
-private anythingSet() {
-	for (name in ["motion","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","smoke","water","button1","triggerModes","timeOfDay"]) {
-		if (settings[name]) {
-			return true
-		}
-	}
-	return false
-}
-
-private ifUnset(Map options, String name, String capability) {
-	if (!settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-private ifSet(Map options, String name, String capability) {
-	if (settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribeToEvents()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	unschedule()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	log.trace "subscribeToEvents()"
-	subscribe(app, appTouchHandler)
-	subscribe(contact, "contact.open", eventHandler)
-	subscribe(contactClosed, "contact.closed", eventHandler)
-	subscribe(acceleration, "acceleration.active", eventHandler)
-	subscribe(motion, "motion.active", eventHandler)
-	subscribe(mySwitch, "switch.on", eventHandler)
-	subscribe(mySwitchOff, "switch.off", eventHandler)
-	subscribe(arrivalPresence, "presence.present", eventHandler)
-	subscribe(departurePresence, "presence.not present", eventHandler)
-	subscribe(smoke, "smoke.detected", eventHandler)
-	subscribe(smoke, "smoke.tested", eventHandler)
-	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
-	subscribe(water, "water.wet", eventHandler)
-	subscribe(button1, "button.pushed", eventHandler)
-
-	if (triggerModes) {
-		subscribe(location, modeChangeHandler)
-	}
-
-	if (timeOfDay) {
-		schedule(timeOfDay, scheduledTimeHandler)
-	}
-}
-
-def eventHandler(evt) {
-	if (allOk) {
-		def lastTime = state[frequencyKey(evt)]
-		if (oncePerDayOk(lastTime)) {
-			if (frequency) {
-				if (lastTime == null || now() - lastTime >= frequency * 60000) {
-					takeAction(evt)
-				}
-				else {
-					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
-				}
-			}
-			else {
-				takeAction(evt)
-			}
-		}
-		else {
-			log.debug "Not taking action because it was already taken today"
-		}
-	}
-}
-
-def modeChangeHandler(evt) {
-	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
-	if (evt.value in triggerModes) {
-		eventHandler(evt)
-	}
-}
-
-def scheduledTimeHandler() {
-	eventHandler(null)
-}
-
-def appTouchHandler(evt) {
-	takeAction(evt)
-}
-
-private takeAction(evt) {
-	log.debug "takeAction($actionType)"
-	def options = [:]
-	if (volume) {
-		bose.setLevel(volume as Integer)
-		options.delay = 1000
-	}
-
-	switch (actionType) {
-		case "Turn On & Play":
-			options ? bose.on(options) : bose.on()
-			break
-		case "Turn Off":
-			options ? bose.off(options) : bose.off()
-			break
-		case "Toggle Play/Pause":
-			def currentStatus = bose.currentValue("playpause")
-			if (currentStatus == "play") {
-				options ? bose.pause(options) : bose.pause()
-			}
-			else if (currentStatus == "pause") {
-				options ? bose.play(options) : bose.play()
-			}
-			break
-		case "Skip to Next Track":
-			options ? bose.nextTrack(options) : bose.nextTrack()
-			break
-		case "Skip to Beginning/Previous Track":
-			options ? bose.previousTrack(options) : bose.previousTrack()
-			break
-        case "Play Preset 1":
-			options ? bose.preset1(options) : bose.preset1()
-			break
-        case "Play Preset 2":
-			options ? bose.preset2(options) : bose.preset2()
-			break 
-        case "Play Preset 3":
-			options ? bose.preset3(options) : bose.preset3()
-			break
-        case "Play Preset 4":
-			options ? bose.preset4(options) : bose.preset4()
-			break
-        case "Play Preset 5":
-			options ? bose.preset5(options) : bose.preset5()
-			break
-        case "Play Preset 6":
-			options ? bose.preset6(options) : bose.preset6()
-			break
-		default:
-			log.error "Action type '$actionType' not defined"
-	}
-
-	if (frequency) {
-		state.lastActionTimeStamp = now()
-	}
-}
-
-private frequencyKey(evt) {
-	//evt.deviceId ?: evt.value
-	"lastActionTimeStamp"
-}
-
-private dayString(Date date) {
-	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
-	if (location.timeZone) {
-		df.setTimeZone(location.timeZone)
-	}
-	else {
-		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-	}
-	df.format(date)
-}
-
-private oncePerDayOk(Long lastTime) {
-	def result = true
-	if (oncePerDay) {
-		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
-		log.trace "oncePerDayOk = $result"
-	}
-	result
-}
-
-// TODO - centralize somehow
-private getAllOk() {
-	modeOk && daysOk && timeOk
-}
-
-private getModeOk() {
-	def result = !modes || modes.contains(location.mode)
-	log.trace "modeOk = $result"
-	result
-}
-
-private getDaysOk() {
-	def result = true
-	if (days) {
-		def df = new java.text.SimpleDateFormat("EEEE")
-		if (location.timeZone) {
-			df.setTimeZone(location.timeZone)
-		}
-		else {
-			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-		}
-		def day = df.format(new Date())
-		result = days.contains(day)
-	}
-	log.trace "daysOk = $result"
-	result
-}
-
-private getTimeOk() {
-	def result = true
-	if (starting && ending) {
-		def currTime = now()
-		def start = timeToday(starting, location?.timeZone).time
-		def stop = timeToday(ending, location?.timeZone).time
-		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private hhmm(time, fmt = "h:mm a")
-{
-	def t = timeToday(time, location.timeZone)
-	def f = new java.text.SimpleDateFormat(fmt)
-	f.setTimeZone(location.timeZone ?: timeZone(time))
-	f.format(t)
-}
-
-private timeIntervalLabel()
-{
-	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
-}
-// TODO - End Centralize

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -246,9 +246,6 @@ def toggle(devices) {
 	else if (devices*.currentValue('lock').contains('locked')) {
 		devices.unlock()
 	}
-	else if (devices*.currentValue('lock').contains('unlocked')) {
-		devices.lock()
-	}
 	else if (devices*.currentValue('alarm').contains('off')) {
         devices.siren()
     }

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -1,7 +1,7 @@
 /**
  *  Every Element
  *
- *  Copyright 2015 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,555 +14,349 @@
  *
  */
 definition(
-        name: "Every Element",
-        namespace: "smartthings/examples",
-        author: "SmartThings",
-        description: "Every element demonstration app",
-        category: "SmartThings Internal",
-        iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-        iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
+	name: "Every Element",
+	namespace: "smartthings/examples",
+	author: "SmartThings",
+	description: "Every element demonstration app",
+	category: "SmartThings Internal",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png"
 )
 
 preferences {
-    // landing page
-    page(name: "firstPage")
-
-    // PageKit
-    page(name: "buttonsPage")
-    page(name: "imagePage")
-    page(name: "inputPage")
-    page(name: "inputBooleanPage")
-    page(name: "inputIconPage")
-    page(name: "inputImagePage")
-    page(name: "inputDevicePage")
-    page(name: "inputCapabilityPage")
-    page(name: "inputRoomPage")
-    page(name: "inputModePage")
-    page(name: "inputSelectionPage")
-    page(name: "inputHubPage")
-    page(name: "inputContactBookPage")
-    page(name: "inputTextPage")
-    page(name: "inputTimePage")
-    page(name: "appPage")
-    page(name: "hrefPage")
-    page(name: "paragraphPage")
-    page(name: "videoPage")
-    page(name: "labelPage")
-    page(name: "modePage")
-
-    // Every element helper pages
-    page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
-    page(name: "flattenedPage")
+	page(name: "firstPage")
+	page(name: "inputPage")
+	page(name: "appPage")
+	page(name: "labelPage")
+	page(name: "modePage")
+	page(name: "paragraphPage")
+	page(name: "iconPage")
+	page(name: "hrefPage")
+	page(name: "buttonsPage")
+	page(name: "imagePage")
+	page(name: "videoPage")
+	page(name: "deadEnd", title: "Nothing to see here, move along.", content: "foo")
+	page(name: "flattenedPage")
 }
 
 def firstPage() {
-    dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
-        section {
-            href(page: "appPage", title: "Element: 'app'")
-            href(page: "buttonsPage", title: "Element: 'buttons'")
-            href(page: "hrefPage", title: "Element: 'href'")
-            href(page: "imagePage", title: "Element: 'image'")
-            href(page: "inputPage", title: "Element: 'input'")
-            href(page: "labelPage", title: "Element: 'label'")
-            href(page: "modePage", title: "Element: 'mode'")
-            href(page: "paragraphPage", title: "Element: 'paragraph'")
-            href(page: "videoPage", title: "Element: 'video'")
-        }
-        section {
-            href(page: "flattenedPage", title: "All of the above elements on a single page")
-        }
-    }
+	dynamicPage(name: "firstPage", title: "Where to first?", install: true, uninstall: true) {
+		section() {
+			href(page: "inputPage", title: "Element: 'input'")
+			href(page: "appPage", title: "Element: 'app'")
+			href(page: "labelPage", title: "Element: 'label'")
+			href(page: "modePage", title: "Element: 'mode'")
+			href(page: "paragraphPage", title: "Element: 'paragraph'")
+			href(page: "iconPage", title: "Element: 'icon'")
+			href(page: "hrefPage", title: "Element: 'href'")
+			href(page: "buttonsPage", title: "Element: 'buttons'")
+			href(page: "imagePage", title: "Element: 'image'")
+			href(page: "videoPage", title: "Element: 'video'")
+		}
+		section() {
+			href(page: "flattenedPage", title: "All of the above elements on a single page")
+		}
+	}
 }
 
 def inputPage() {
-    dynamicPage(name: "inputPage", title: "Links to every 'input' element") {
-        section {
-            href(page: "inputBooleanPage", title: "to boolean page")
-            href(page: "inputIconPage", title: "to icon page")
-            href(page: "inputImagePage", title: "to image page")
-            href(page: "inputSelectionPage", title: "to selection page")
-            href(page: "inputTextPage", title: "to text page")
-            href(page: "inputTimePage", title: "to time page")
-        }
-        section("subsets of selection input") {
-            href(page: "inputDevicePage", title: "to device selection page")
-            href(page: "inputCapabilityPage", title: "to capability selection page")
-            href(page: "inputRoomPage", title: "to room selection page")
-            href(page: "inputModePage", title: "to mode selection page")
-            href(page: "inputHubPage", title: "to hub selection page")
-            href(page: "inputContactBookPage", title: "to contact-book selection page")
-        }
-    }
-}
-
-def inputBooleanPage() {
-    dynamicPage(name: "inputBooleanPage") {
-        section {
-            paragraph "The `required` and `multiple` attributes have no effect because the value will always be either `true` or `false`"
-        }
-        section {
-            input(type: "boolean", name: "booleanWithoutDescription", title: "without description", description: null)
-            input(type: "boolean", name: "booleanWithDescription", title: "with description", description: "This has a description")
-        }
-        section("defaultValue: 'true'") {
-            input(type: "boolean", name: "booleanWithDefaultValue", title: "", description: "", defaultValue: "true")
-        }
-        section("with image") {
-            input(type: "boolean", name: "booleanWithoutDescriptionWithImage", title: "without description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", description: null)
-            input(type: "boolean", name: "booleanWithDescriptionWithImage", title: "with description", description: "This has a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputIconPage() {
-    dynamicPage(name: "inputIconPage") {
-        section {
-            paragraph "`description` is not displayed for icon elements"
-            paragraph "`multiple` has no effect because you can only choose a single icon"
-        }
-        section("required: true") {
-            input(type: "icon", name: "iconRequired", title: "without description", required: true)
-            input(type: "icon", name: "iconRequiredWithDescription", title: "with description", description: "this is a description", required: true)
-        }
-        section("with image") {
-            paragraph "The image specified will be replaced after an icon is selected"
-            input(type: "icon", name: "iconwithImage", title: "without description", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputImagePage() {
-    dynamicPage(name: "inputImagePage") {
-        section {
-            paragraph "This only exists in DeviceTypes. Someone should do something about that. (glares at MikeDave)"
-            paragraph "Go to the device preferences of a Mobile Presence device to see it in action"
-            paragraph "If you try to set the value of this, it will not behave as it would in Device Preferences"
-            input(type: "image", title: "This is kind of what it looks like", required: false)
-        }
-    }
-}
-
-
-def optionsGroup(List groups, String title) {
-    def group = [values:[], order: groups.size()]
-    group.title = title ?: ""
-    groups << group
-    return groups
-}
-def addValues(List groups, String key, String value) {
-    def lastGroup = groups[-1]
-    lastGroup["values"] << [
-            key: key,
-            value: value,
-            order: lastGroup["values"].size()
-    ]
-    return groups
-}
-def listToMap(List original) {
-    original.inject([:]) { result, v ->
-        result[v] = v
-        return result
-    }
-}
-def addGroup(List groups, String title, values) {
-    if (values instanceof List) {
-        values = listToMap(values)
-    }
-
-    values.inject(optionsGroup(groups, title)) { result, k, v ->
-        return addValues(result, k, v)
-    }
-    return groups
-}
-def addGroup(values) {
-    addGroup([], null, values)
-}
-/* Example usage of options builder
-
-// Creating grouped options
-    def newGroups = []
-    addGroup(newGroups, "first group", ["foo", "bar", "baz"])
-    addGroup(newGroups, "second group", [zero: "zero", one: "uno", two: "dos", three: "tres"])
-
-// simple list
-    addGroup(["a", "b", "c"])
-
-// simple map
-    addGroup(["a": "yes", "b": "no", "c": "maybe"])​​​​
-*/
-
-
-def inputSelectionPage() {
-
-    def englishOptions = ["One", "Two", "Three"]
-    def spanishOptions = ["Uno", "Dos", "Tres"]
-    def groupedOptions = []
-    addGroup(groupedOptions, "English", englishOptions)
-    addGroup(groupedOptions, "Spanish", spanishOptions)
-
-    dynamicPage(name: "inputSelectionPage") {
-
-        section("options variations") {
-            paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
-            input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
-        }
-
-        section("list vs map") {
-            paragraph "These should be identical in UI, but are different in code and will produce different settings"
-            input(type: "enum", name: "selectionList", title: "Choose a device", description: "settings will be something like ['Device1 Label']", groupedOptions: addGroup(["Device1 Label", "Device2 Label"]))
-            input(type: "enum", name: "selectionMap", title: "Choose a device", description: "settings will be something like ['device1-id']", groupedOptions: addGroup(["device1-id": "Device1 Label", "device2-id": "Device2 Label"]))
-        }
-
-        section("segmented") {
-            paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
-
-            paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
-            input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
-            input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
-
-            paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
-        }
-
-        section("required: true") {
-            input(type: "enum", name: "selectionRequired", title: "This is required", description: "It should look different when nothing is selected", groupedOptions: addGroup(["only option"]), required: true)
-        }
-
-        section("multiple: true") {
-            input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
-        }
-
-        section("with image") {
-            input(type: "enum", name: "selectionWithImage", title: "This has an image", description: "and a description", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputTextPage() {
-    dynamicPage(name: "inputTextPage", title: "Every 'text' variation") {
-        section("style and functional differences") {
-            input(type: "text", name: "textRequired", title: "required: true", description: "This should look different when nothing has been entered", required: true)
-            input(type: "text", name: "textWithImage", title: "with image", description: "This should look different when nothing has been entered", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", required: false)
-        }
-        section("text") {
-            input(type: "text", name: "text", title: "This has an alpha-numeric keyboard", description: "no special formatting", required: false)
-        }
-        section("password") {
-            input(type: "password", name: "password", title: "This has an alpha-numeric keyboard", description: "masks value", required: false)
-        }
-        section("email") {
-            input(type: "email", name: "email", title: "This has an email-specific keyboard", description: "no special formatting", required: false)
-        }
-        section("phone") {
-            input(type: "phone", name: "phone", title: "This has a numeric keyboard", description: "formatted for phone numbers", required: false)
-        }
-        section("decimal") {
-            input(type: "decimal", name: "decimal", title: "This has an numeric keyboard with decimal point", description: "no special formatting", required: false)
-        }
-        section("number") {
-            input(type: "number", name: "number", title: "This has an numeric keyboard without decimal point", description: "no special formatting", required: false)
-        }
-
-        section("specified ranges") {
-            paragraph "You can limit number and decimal inputs to a specific range."
-            input(range: "50..150", type: "decimal", name: "decimalRange50..150", title: "only values between 50 and 150 will pass validation", description: "no special formatting", required: false)
-            paragraph "Negative limits will add a negative symbol to the keyboard."
-            input(range: "-50..50", type: "number", name: "numberRange-50..50", title: "only values between -50 and 50 will pass validation", description: "no special formatting", required: false)
-            paragraph "Specify * to not limit one side or the other."
-            input(range: "*..0", type: "decimal", name: "decimalRange*..0", title: "only negative values will pass validation", description: "no special formatting", required: false)
-            input(range: "*..*", type: "number", name: "numberRange*..*", title: "only positive values will pass validation", description: "no special formatting", required: false)
-            paragraph "If you don't specify a range, it defaults to 0..*"
-        }
-    }
-}
-def inputTimePage() {
-    dynamicPage(name: "inputTimePage") {
-        section {
-            input(type: "time", name: "timeWithDescription", title: "a time picker", description: "with a description", required: false)
-            input(type: "time", name: "timeWithoutDescription", title: "without a description", description: null, required: false)
-            input(type: "time", name: "timeRequired", title: "required: true", required: true)
-        }
-    }
-}
-
-/// selection subsets
-def inputDevicePage() {
-
-    dynamicPage(name: "inputDevicePage") {
-
-        section("required: true") {
-            input(type: "device.switch", name: "deviceRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "device.switch", name: "deviceMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "device.switch", name: "deviceRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputCapabilityPage() {
-
-    dynamicPage(name: "inputCapabilityPage") {
-
-        section("required: true") {
-            input(type: "capability.switch", name: "capabilityRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "capability.switch", name: "capabilityMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "capability.switch", name: "capabilityRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputRoomPage() {
-
-    dynamicPage(name: "inputRoomPage") {
-
-        section("required: true") {
-            input(type: "room", name: "roomRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "room", name: "roomMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "room", name: "roomRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputModePage() {
-
-    dynamicPage(name: "inputModePage") {
-
-        section("required: true") {
-            input(type: "mode", name: "modeRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "mode", name: "modeMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "mode", name: "modeRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputHubPage() {
-
-    dynamicPage(name: "inputHubPage") {
-
-        section("required: true") {
-            input(type: "hub", name: "hubRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "hub", name: "hubMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "hub", name: "hubRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
-}
-def inputContactBookPage() {
-
-    dynamicPage(name: "inputContactBookPage") {
-
-        section("required: true") {
-            input(type: "contact", name: "contactRequired", title: "This is required", description: "It should look different when nothing is selected")
-        }
-
-        section("multiple: true") {
-            input(type: "contact", name: "contactMultiple", title: "This is required", description: "It should look different when nothing is selected", multiple: true)
-        }
-
-        section("with image") {
-            input(type: "contact", name: "contactRequired", title: "This has an image", description: "and a description", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
+	dynamicPage(name: "inputPage", title: "Every 'input' type") {
+		section("enum") {
+			input(type: "enum", name: "enumRefresh", title: "submitOnChange:true", required: false, multiple: true, options: ["one", "two", "three"], submitOnChange: true)
+			if (enumRefresh) {
+				paragraph "${enumRefresh}"
+			}
+			input(type: "enum", name: "enumSegmented", title: "style:segmented", required: false, multiple: true, options: ["one", "two", "three"], style: "segmented")
+			input(type: "enum", name: "enum", title: "required:false, multiple:false", required: false, multiple: false, options: ["one", "two", "three"])
+			input(type: "enum", name: "enumRequired", title: "required:true", required: true, multiple: false, options: ["one", "two", "three"])
+			input(type: "enum", name: "enumMultiple", title: "multiple:true", required: false, multiple: true, options: ["one", "two", "three"])
+			input(type: "enum", name: "enumWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, options: ["one", "two", "three"], image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+			input(type: "enum", name: "enumWithGroupedOptions", title: "groupedOptions", description: "This enum has grouped options", required: false, multiple: true, groupedOptions: [
+				[
+					title : "the group title that is displayed",
+					order : 0, // the order of the group; 0-based
+					image : "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", // not yet supported
+					values: [
+						[
+							key  : "the value that will be placed in SmartApp settings.", // such as a device id
+							value: "the title of the selectable option that is displayed", // such as a device name
+							order: 0 // the order of the option
+						]
+					]
+				],
+				[
+					title : "the second group title that is displayed",
+					order : 1, // the order of the group; 0-based
+					image : null, // not yet supported
+					values: [
+						[
+							key  : "some_device_id",
+							value: "some_device_name",
+							order: 1 // the order of the option. This option will appear second in the list even though it is the first option defined in this map
+						],
+						[
+							key  : "some_other_device_id",
+							value: "some_other_device_name",
+							order: 0 // the order of the option. This option will appear first in the list even though it is not the first option defined in this map
+						]
+					]
+				]
+			])
+		}
+		section("text") {
+			input(type: "text", name: "text", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "text", name: "textRequired", title: "required:true", required: true, multiple: false)
+			input(type: "text", name: "textWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("number") {
+			input(type: "number", name: "number", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "number", name: "numberRequired", title: "required:true", required: true, multiple: false)
+			input(type: "number", name: "numberWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("boolean") {
+			input(type: "boolean", name: "boolean", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "boolean", name: "booleanWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("password") {
+			input(type: "password", name: "password", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "password", name: "passwordRequired", title: "required:true", required: true, multiple: false)
+			input(type: "password", name: "passwordWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("phone") {
+			input(type: "phone", name: "phone", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "phone", name: "phoneRequired", title: "required:true", required: true, multiple: false)
+			input(type: "phone", name: "phoneWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("email") {
+			input(type: "email", name: "email", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "email", name: "emailRequired", title: "required:true", required: true, multiple: false)
+			input(type: "email", name: "emailWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("decimal") {
+			input(type: "decimal", name: "decimal", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "decimal", name: "decimalRequired", title: "required:true", required: true, multiple: false)
+			input(type: "decimal", name: "decimalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("mode") {
+			input(type: "mode", name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "mode", name: "modeRequired", title: "required:true", required: true, multiple: false)
+			input(type: "mode", name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
+			input(type: "mode", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("icon") {
+			input(type: "icon", name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "icon", name: "iconRequired", title: "required:true", required: true, multiple: false)
+			input(type: "icon", name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("capability") {
+			input(type: "capability.switch", name: "capability", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "capability.switch", name: "capabilityRequired", title: "required:true", required: true, multiple: false)
+			input(type: "capability.switch", name: "capabilityMultiple", title: "multiple:true", required: false, multiple: true)
+			input(type: "capability.switch", name: "capabilityWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("hub") {
+			input(type: "hub", name: "hub", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "hub", name: "hubRequired", title: "required:true", required: true, multiple: false)
+			input(type: "hub", name: "hubMultiple", title: "multiple:true", required: false, multiple: true)
+			input(type: "hub", name: "hubWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("device") {
+			input(type: "device.switch", name: "device", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "device.switch", name: "deviceRequired", title: "required:true", required: true, multiple: false)
+			input(type: "device.switch", name: "deviceMultiple", title: "multiple:true", required: false, multiple: true)
+			input(type: "device.switch", name: "deviceWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("time") {
+			input(type: "time", name: "time", title: "required:false, multiple:false", required: false, multiple: false)
+			input(type: "time", name: "timeRequired", title: "required:true", required: true, multiple: false)
+			input(type: "time", name: "timeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+		section("contact-book") {
+			input("recipients", "contact", title: "Notify", description: "Send notifications to") {
+				input(type: "phone", name: "phone", title: "Send text message to", required: false, multiple: false)
+				input(type: "boolean", name: "boolean", title: "Send push notification", required: false, multiple: false)
+			}
+		}
+	}
 }
 
 def appPage() {
-    dynamicPage(name: "appPage", title: "Every 'app' type") {
-        section {
-            paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
-        }
-        section("app") {
-            app(
-                    name: "app",
-                    title: "required:false, multiple:false",
-                    required: false,
-                    multiple: false,
-                    namespace: "Steve",
-                    appName: "Child SmartApp"
-            )
-            app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
-            app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
-            app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-        }
-        section("multiple:true") {
-            app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
-        }
-        section("multiple:true with image") {
-            app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
-        }
-    }
+	dynamicPage(name: "appPage", title: "Every 'app' type") {
+		section {
+			paragraph "These won't work unless you create a child SmartApp to link to... Sorry."
+		}
+		section("app") {
+			app(
+				name: "app",
+				title: "required:false, multiple:false",
+				required: false,
+				multiple: false,
+				namespace: "Steve",
+				appName: "Child SmartApp"
+			)
+			app(name: "appRequired", title: "required:true", required: true, multiple: false, namespace: "Steve", appName: "Child SmartApp")
+			app(name: "appComplete", title: "state:complete", required: false, multiple: false, namespace: "Steve", appName: "Child SmartApp", state: "complete")
+			app(name: "appWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+		}
+		section("multiple:true") {
+			app(name: "appMultiple", title: "multiple:true", required: false, multiple: true, namespace: "Steve", appName: "Child SmartApp")
+		}
+		section("multiple:true with image") {
+			app(name: "appMultipleWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", namespace: "Steve", appName: "Child SmartApp")
+		}
+	}
 }
 
 def labelPage() {
-    dynamicPage(name: "labelPage", title: "Every 'Label' type") {
-        section("label") {
-            paragraph "The difference between a label element and a text input element is that the label element will effect the SmartApp directly by setting the label. An input element will place the set value in the SmartApp's settings."
-            paragraph "There are 3 here as an example. Never use more than 1 label element on a page."
-            label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
-            label(name: "labelRequired", title: "required:true", required: true, multiple: false)
-            label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
+	dynamicPage(name: "labelPage", title: "Every 'Label' type") {
+		section("label") {
+			label(name: "label", title: "required:false, multiple:false", required: false, multiple: false)
+			label(name: "labelRequired", title: "required:true", required: true, multiple: false)
+			label(name: "labelWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+	}
 }
 
 def modePage() {
-    dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
-        section("mode") {
-            paragraph "The difference between a mode element and a mode input element is that the mode element will effect the SmartApp directly by setting the modes it executes in. A mode input element will place the set value in the SmartApp's settings."
-            paragraph "Another difference is that you can select 'All Modes' when choosing which mode the SmartApp should execute in. This is the same as selecting no modes. When a SmartApp does not have modes specified, it will execute in all modes."
-            paragraph "There are 4 here as an example. Never use more than 1 mode element on a page."
-            mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
-            mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
-            mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
-            mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-        }
-    }
+	dynamicPage(name: "modePage", title: "Every 'mode' type") { // TODO: finish this
+		section("mode") {
+			mode(name: "mode", title: "required:false, multiple:false", required: false, multiple: false)
+			mode(name: "modeRequired", title: "required:true", required: true, multiple: false)
+			mode(name: "modeMultiple", title: "multiple:true", required: false, multiple: true)
+			mode(name: "modeWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, multiple: true, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+	}
 }
 
 def paragraphPage() {
-    dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
-        section("paragraph") {
-            paragraph "This is how you should make a paragraph element"
-            paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
-        }
-    }
+	dynamicPage(name: "paragraphPage", title: "Every 'paragraph' type") {
+		section("paragraph") {
+			paragraph "This us how you should make a paragraph element"
+			paragraph image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "This is a long description, blah, blah, blah."
+		}
+	}
+}
+
+def iconPage() {
+	dynamicPage(name: "iconPage", title: "Every 'icon' type") { // TODO: finish this
+		section("icon") {
+			icon(name: "icon", title: "required:false, multiple:false", required: false, multiple: false)
+			icon(name: "iconRequired", title: "required:true", required: true, multiple: false)
+			icon(name: "iconWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+	}
 }
 
 def hrefPage() {
-    dynamicPage(name: "hrefPage", title: "Every 'href' variation") {
-        section("stylistic differences") {
-            href(page: "deadEnd", title: "state: 'complete'", description: "gives the appearance of an input that has been filled out", state: "complete")
-            href(page: "deadEnd", title: "with image", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
-            href(page: "deadEnd", title: "with image and description", description: "and state: 'complete'", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", state: "complete")
-        }
-        section("functional differences") {
-            href(page: "deadEnd", title: "to a page within the app")
-            href(url: "http://www.google.com", title: "to a url using all defaults")
-            href(url: "http://www.google.com", title: "external: true", description: "takes you outside the app", external: true)
-        }
-    }
+	dynamicPage(name: "hrefPage", title: "Every 'href' type") {
+		section("page") {
+			href(name: "hrefPage", title: "required:false, multiple:false", required: false, multiple: false, page: "deadEnd")
+			href(name: "hrefPageRequired", title: "required:true", required: true, multiple: false, page: "deadEnd", description: "Don't make hrefs required")
+			href(name: "hrefPageComplete", title: "state:complete", required: false, multiple: false, page: "deadEnd", state: "complete")
+			href(name: "hrefPageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", page: "deadEnd",)
+		}
+		section("external") {
+			href(name: "hrefExternal", title: "required:false, multiple:false", required: false, multiple: false, style: "external", url: "http://smartthings.com/")
+			href(name: "hrefExternalRequired", title: "required:true", required: true, multiple: false, style: "external", url: "http://smartthings.com/", description: "Don't make hrefs required")
+			href(name: "hrefExternalComplete", title: "state:complete", required: false, multiple: true, style: "external", url: "http://smartthings.com/", state: "complete")
+			href(name: "hrefExternalWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
+		}
+		section("embedded") {
+			href(name: "hrefEmbedded", title: "required:false, multiple:false", required: false, multiple: false, style: "embedded", url: "http://smartthings.com/")
+			href(name: "hrefEmbeddedRequired", title: "required:true", required: true, multiple: false, style: "embedded", url: "http://smartthings.com/", description: "Don't make hrefs required")
+			href(name: "hrefEmbeddedComplete", title: "state:complete", required: false, multiple: true, style: "embedded", url: "http://smartthings.com/", state: "complete")
+			href(name: "hrefEmbeddedWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", url: "http://smartthings.com/")
+		}
+	}
 }
 
 def buttonsPage() {
-    dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
-        section("Simple Buttons") {
-            paragraph "If there are an odd number of buttons, the last button will span the entire view area."
-            buttons(name: "buttons1", title: "1 button", buttons: [
-                    [label: "foo", action: "foo"]
-            ])
-            buttons(name: "buttons2", title: "2 buttons", buttons: [
-                    [label: "foo", action: "foo"],
-                    [label: "bar", action: "bar"]
-            ])
-            buttons(name: "buttons3", title: "3 buttons", buttons: [
-                    [label: "foo", action: "foo"],
-                    [label: "bar", action: "bar"],
-                    [label: "baz", action: "baz"]
-            ])
-            buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
-                    [label: "foo", action: "foo"],
-                    [label: "bar", action: "bar"]
-            ])
-        }
-        section("Colored Buttons") {
-            buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
-                    [label: "complete", action: "bar", backgroundColor: "complete"],
-                    [label: "required", action: "bar", backgroundColor: "required"]
-            ])
-            buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
-                    [label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
-                    [label: "fg: #ffac00", action: "foo", color: "#ffac00"],
-                    [label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
-            ])
-            buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
-                    [label: "green", action: "foo", backgroundColor: "green"],
-                    [label: "red", action: "foo", backgroundColor: "red"],
-                    [label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
-            ])
-        }
-    }
+	dynamicPage(name: "buttonsPage", title: "Every 'button' type") {
+		section("buttons") {
+			buttons(name: "buttons", title: "required:false, multiple:false", required: false, multiple: false, buttons: [
+				[label: "foo", action: "foo"],
+				[label: "bar", action: "bar"]
+			])
+			buttons(name: "buttonsRequired", title: "required:true", required: true, multiple: false, buttons: [
+				[label: "foo", action: "foo"],
+				[label: "bar", action: "bar"]
+			])
+			buttons(name: "buttonsWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", buttons: [
+				[label: "foo", action: "foo"],
+				[label: "bar", action: "bar"]
+			])
+		}
+		section("Colored Buttons") {
+			buttons(name: "buttonsColoredSpecial", title: "special strings", description: "SmartThings highly recommends using these colors", buttons: [
+				[label: "complete", action: "bar", backgroundColor: "complete"],
+				[label: "required", action: "bar", backgroundColor: "required"]
+			])
+			buttons(name: "buttonsColoredHex", title: "hex values work", buttons: [
+				[label: "bg: #000dff", action: "foo", backgroundColor: "#000dff"],
+				[label: "fg: #ffac00", action: "foo", color: "#ffac00"],
+				[label: "both fg and bg", action: "foo", color: "#ffac00", backgroundColor: "#000dff"]
+			])
+			buttons(name: "buttonsColoredString", title: "strings work too", buttons: [
+				[label: "green", action: "foo", backgroundColor: "green"],
+				[label: "red", action: "foo", backgroundColor: "red"],
+				[label: "both fg and bg", action: "foo", color: "red", backgroundColor: "green"]
+			])
+		}
+	}
 
 }
 
 def imagePage() {
-    dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
-        section("image") {
-            image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
-            image(name: "imageWithMultipleImages", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, images: ["https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png", "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"])
-        }
-    }
+	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish thise
+		section("image") {
+			image "http://f.cl.ly/items/1k1S0A0m3805402o3O12/20130915-191127.jpg"
+			image(name: "imageWithImage", title: "This element has an image and a long title.", description: "I am setting long title and descriptions to test the offset", required: false, image: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png")
+		}
+	}
 }
 
 def videoPage() {
-    dynamicPage(name: "videoPage", title: "Every 'video' type") { // TODO: finish this
-        section("video") {
-            // TODO: update this when there is a videoElement method
-            element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://f.cl.ly/items/0w0D1p0K2D0d190F3H3N/Image%202015-12-14%20at%207.57.27%20AM.jpg", video: "http://f.cl.ly/items/3O2L03471l2K3E3l3K1r/Zombie%20Kid%20Likes%20Turtles.mp4")
-        }
-    }
+	dynamicPage(name: "imagePage", title: "Every 'image' type") { // TODO: finish this
+		section("video") {
+			// TODO: update this when there is a videoElement method
+			element(name: "videoElement", element: "video", type: "video", title: "this is a video!", description: "I am setting long title and descriptions to test the offset", required: false, image: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c26321.jpg", video: "http://ec2-54-161-144-215.compute-1.amazonaws.com:8081/jesse/cam1/54aafcd1c198347511c2631f.mp4")
+		}
+	}
 }
 
 def flattenedPage() {
-    def allSections = []
-    firstPage().sections[0].body.each { hrefElement ->
-        if (hrefElement.name != "inputPage") {
-            // inputPage is a bunch of hrefs
-            allSections += "${hrefElement.page}"().sections
-        }
-    }
-    // collect the input elements
-    inputPage().sections.each { section ->
-        section.body.each { hrefElement ->
-            allSections += "${hrefElement.page}"().sections
-        }
-    }
-    def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
-    flattenedPage.sections = allSections
-    return flattenedPage
+	def allSections = []
+	firstPage().sections.each { section ->
+		section.body.each { hrefElement ->
+			if (hrefElement.page != "flattenedPage") {
+				allSections += "${hrefElement.page}"().sections
+			}
+		}
+	}
+	def flattenedPage = dynamicPage(name: "flattenedPage", title: "All elements in one page!") {}
+	flattenedPage.sections = allSections
+	return flattenedPage
 }
 
 def foo() {
-    dynamicPage(name: "deadEnd") {
-        section {  }
-    }
+	dynamicPage(name: "deadEnd") {
+
+	}
 }
 
 def installed() {
-    log.debug "Installed with settings: ${settings}"
+	log.debug "Installed with settings: ${settings}"
 
-    initialize()
+	initialize()
 }
 
 def updated() {
-    log.debug "Updated with settings: ${settings}"
+	log.debug "Updated with settings: ${settings}"
 
-    unsubscribe()
-    initialize()
+	unsubscribe()
+	initialize()
 }
 
 def initialize() {
-    // TODO: subscribe to attributes, devices, locations, etc.
+	// TODO: subscribe to attributes, devices, locations, etc.
 }

smartapps/smartthings/foscam-connect.src/foscam-connect.groovy

@@ -23,8 +23,7 @@ definition(
     description: "Connect and take pictures using your Foscam camera from inside the Smartthings app.",
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png",
-    singleInstance: true
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/foscam@2x.png"
 )
 
 preferences {

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -38,75 +38,37 @@ preferences {
 	page(name: "schedulingPage")
 	page(name: "completionPage")
 	page(name: "numbersPage")
-	page(name: "controllerExplanationPage")
 }
 
 def rootPage() {
 	dynamicPage(name: "rootPage", title: "", install: true, uninstall: true) {
 
-		section("What to dim") {
+		section {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
-			if (dimmers) {
-				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
-			}
 		}
 
 		if (dimmers) {
 
-			section("Gentle Wake Up Has A Controller") {
-				href(title: "Learn how to control Gentle Wake Up", page: "controllerExplanationPage", description: null)
+			section {
+				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 
-			section("Rules For Dimming") {
-				href(name: "toSchedulingPage", page: "schedulingPage", title: "Automation", description: schedulingHrefDescription() ?: "Set rules for when to start", state: schedulingHrefDescription() ? "complete" : "")
-				input(name: "manualOverride", type: "enum", options: ["cancel": "Cancel dimming", "jumpTo": "Jump to the end"], title: "When one of the dimmers is manually turned off…", description: "dimming will continue", required: false, multiple: false)
-				href(name: "toCompletionPage", title: "Completion Actions", page: "completionPage", state: completionHrefDescription() ? "complete" : "", description: completionHrefDescription() ?: "Set rules for what to do when dimming completes")
+			section {
+				href(name: "toSchedulingPage", page: "schedulingPage", title: "Rules For Automatically Dimming Your Lights", description: schedulingHrefDescription(), state: schedulingHrefDescription() ? "complete" : "")
+			}
+
+			section {
+				href(name: "toCompletionPage", title: "Completion Actions (Optional)", page: "completionPage", state: completionHrefDescription() ? "complete" : "", description: completionHrefDescription())
 			}
 
 			section {
 				// TODO: fancy label
-				label(title: "Label This SmartApp", required: false, defaultValue: "", description: "Highly recommended", submitOnChange: true)
+				label(title: "Label this SmartApp", required: false, defaultValue: "")
 			}
 		}
 	}
 }
 
-def controllerExplanationPage() {
-	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
-
-		section("With other SmartApps", hideable: true, hidden: false) {
-			paragraph "When this SmartApp is installed, it will create a controller device which you can use in other SmartApps for even more customizable automation!"
-			paragraph "The controller acts like a switch so any SmartApp that can control a switch can control Gentle Wake Up, too!"
-			paragraph "Routines and 'Smart Lighting' are great ways to automate Gentle Wake Up."
-		}
-
-		section("More about the controller", hideable: true, hidden: true) {
-			paragraph "You can find the controller with your other 'Things'. It will look like this."
-			image "http://f.cl.ly/items/2O0v0h41301U14042z3i/GentleWakeUpController-tile-stopped.png"
-			paragraph "You can start and stop Gentle Wake up by tapping the control on the right."
-			image "http://f.cl.ly/items/3W323J3M1b3K0k0V3X3a/GentleWakeUpController-tile-running.png"
-			paragraph "If you look at the device details screen, you will find even more information about Gentle Wake Up and more fine grain controls."
-			image "http://f.cl.ly/items/291s3z2I2Q0r2q0x171H/GentleWakeUpController-richTile-stopped.png"
-			paragraph "The slider allows you to jump to any point in the dimming process. Think of it as a percentage. If Gentle Wake Up is set to dim down as you fall asleep, but your book is just too good to put down; simply drag the slider to the left and Gentle Wake Up will give you more time to finish your chapter and drift off to sleep."
-			image "http://f.cl.ly/items/0F0N2G0S3v1q0L0R3J3Y/GentleWakeUpController-richTile-running.png"
-			paragraph "In the lower left, you will see the amount of time remaining in the dimming cycle. It does not count down evenly. Instead, it will update whenever the slider is updated; typically every 6-18 seconds depending on the duration of your dimming cycle."
-			paragraph "Of course, you may also tap the middle to start or stop the dimming cycle at any time."
-		}
-
-		section("Starting and stopping the SmartApp itself", hideable: true, hidden: true) {
-			paragraph "Tap the 'play' button on the SmartApp to start or stop dimming."
-			image "http://f.cl.ly/items/0R2u1Z2H30393z2I2V3S/GentleWakeUp-appTouch2.png"
-		}
-
-		section("Turning off devices while dimming", hideable: true, hidden: true) {
-			paragraph "It's best to use other Devices and SmartApps for triggering the Controller device. However, that isn't always an option."
-			paragraph "If you turn off a switch that is being dimmed, it will either continue to dim, stop dimming, or jump to the end of the dimming cycle depending on your settings."
-			paragraph "Unfortunately, some switches take a little time to turn off and may not finish turning off before Gentle Wake Up sets its dim level again. You may need to try a few times to get it to stop."
-			paragraph "That's why it's best to use devices that aren't currently dimming. Remember that you can use other SmartApps to toggle the controller. :)"
-		}
-	}
-}
-
 def numbersPage() {
 	dynamicPage(name:"numbersPage", title:"") {
 
@@ -166,33 +128,24 @@ def endLevelLabel() {
 	return "${endLevel}%"
 }
 
-def weekdays() {
-	["Monday", "Tuesday", "Wednesday", "Thursday", "Friday"]
-}
-
-def weekends() {
-	["Saturday", "Sunday"]
-}
-
 def schedulingPage() {
 	dynamicPage(name: "schedulingPage", title: "Rules For Automatically Dimming Your Lights") {
 
-		section("Use Other SmartApps!") {
-			href(title: "Learn how to control Gentle Wake Up", page: "controllerExplanationPage", description: null)
+		section {
+			input(name: "days", type: "enum", title: "Allow Automatic Dimming On These Days", description: "Every day", required: false, multiple: true, options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"])
 		}
 
-		section("Allow Automatic Dimming") {
-			input(name: "days", type: "enum", title: "On These Days", description: "Every day", required: false, multiple: true, options: weekdays() + weekends())
-		}
-
-		section("Start Dimming...") {
-			input(name: "startTime", type: "time", title: "At This Time", description: null, required: false)
-			input(name: "modeStart", title: "When Entering This Mode", type: "mode", required: false, mutliple: false, submitOnChange: true, description: null)
+		section {
+			input(name: "modeStart", title: "Start when entering this mode", type: "mode", required: false, mutliple: false, submitOnChange: true)
 			if (modeStart) {
 				input(name: "modeStop", title: "Stop when leaving '${modeStart}' mode", type: "bool", required: false)
 			}
 		}
 
+		section {
+			input(name: "startTime", type: "time", title: "Start Dimming At This Time", description: null, required: false)
+		}
+
 	}
 }
 
@@ -241,16 +194,11 @@ def updated() {
 	log.debug "Updating 'Gentle Wake Up' with settings: ${settings}"
 	unschedule()
 
-	def controller = getController()
-	if (controller) {
-		controller.label = app.label
-	}
-
 	initialize()
 }
 
 private initialize() {
-	stop("settingsChange")
+	stop()
 
 	if (startTime) {
 		log.debug "scheduling dimming routine to run at $startTime"
@@ -261,27 +209,15 @@ private initialize() {
 	subscribe(app, appHandler)
 
 	subscribe(location, locationHandler)
-
-	if (manualOverride) {
-		subscribe(dimmers, "switch.off", stopDimmersHandler)
-	}
-
-	if (!getAllChildDevices()) {
-		// create controller device and set name to the label used here
-		def dni = "${new Date().getTime()}"
-		log.debug "app.label: ${app.label}"
-		addChildDevice("smartthings", "Gentle Wake Up Controller", dni, null, ["label": app.label])
-		state.controllerDni = dni
-	}
 }
 
 def appHandler(evt) {
 	log.debug "appHandler evt: ${evt.value}"
 	if (evt.value == "touch") {
 		if (atomicState.running) {
-			stop("appTouch")
+			stop()
 		} else {
-			start("appTouch")
+			start()
 		}
 	}
 }
@@ -297,47 +233,26 @@ def locationHandler(evt) {
 	def modeStopIsTrue = (modeStop && modeStop != "false")
 
 	if (isSpecifiedMode && canStartAutomatically()) {
-		start("modeChange")
+		start()
 	} else if (!isSpecifiedMode && modeStopIsTrue) {
-		stop("modeChange")
+		stop()
 	}
 
 }
 
-def stopDimmersHandler(evt) {
-	log.trace "stopDimmersHandler evt: ${evt.value}"
-	def percentComplete = completionPercentage()
-	// Often times, the first thing we do is turn lights on or off so make sure we don't stop as soon as we start
-	if (percentComplete > 2 && percentComplete < 98) {
-		if (manualOverride == "cancel") {
-			log.debug "STOPPING in stopDimmersHandler"
-			stop("manualOverride")
-		} else if (manualOverride == "jumpTo") {
-			def end = dynamicEndLevel()
-			log.debug "Jumping to 99% complete in stopDimmersHandler"
-			jumpTo(99)
-		}
-
-	} else {
-		log.debug "not stopping in stopDimmersHandler"
-	}
-}
-
 // ========================================================
 // Scheduling
 // ========================================================
 
 def scheduledStart() {
 	if (canStartAutomatically()) {
-		start("schedule")
+		start()
 	}
 }
 
-public def start(source) {
+def start() {
 	log.trace "START"
 
-	sendStartEvent(source)
-
 	setLevelsInState()
 
 	atomicState.running = true
@@ -348,11 +263,9 @@ public def start(source) {
 	increment()
 }
 
-public def stop(source) {
+def stop() {
 	log.trace "STOP"
 
-	sendStopEvent(source)
-
 	atomicState.running = false
 	atomicState.start = 0
 
@@ -369,110 +282,6 @@ private healthCheck() {
 	increment()
 }
 
-// ========================================================
-// Controller
-// ========================================================
-
-def sendStartEvent(source) {
-	log.trace "sendStartEvent(${source})"
-	def eventData = [
-			name: "sessionStatus",
-			value: "running",
-			descriptionText: "${app.label} has started dimming",
-			displayed: true,
-			linkText: app.label,
-			isStateChange: true
-	]
-	if (source == "modeChange") {
-		eventData.descriptionText += " because of a mode change"
-	} else if (source == "schedule") {
-		eventData.descriptionText += " as scheduled"
-	} else if (source == "appTouch") {
-		eventData.descriptionText += " because you pressed play on the app"
-	} else if (source == "controller") {
-		eventData.descriptionText += " because you pressed play on the controller"
-	}
-
-	sendControllerEvent(eventData)
-}
-
-def sendStopEvent(source) {
-	log.trace "sendStopEvent(${source})"
-	def eventData = [
-			name: "sessionStatus",
-			value: "stopped",
-			descriptionText: "${app.label} has stopped dimming",
-			displayed: true,
-			linkText: app.label,
-			isStateChange: true
-	]
-	if (source == "modeChange") {
-		eventData.descriptionText += " because of a mode change"
-		eventData.value += "cancelled"
-	} else if (source == "schedule") {
-		eventData.descriptionText = "${app.label} has finished dimming"
-	} else if (source == "appTouch") {
-		eventData.descriptionText += " because you pressed play on the app"
-		eventData.value += "cancelled"
-	} else if (source == "controller") {
-		eventData.descriptionText += " because you pressed stop on the controller"
-		eventData.value += "cancelled"
-	} else if (source == "settingsChange") {
-		eventData.descriptionText += " because the settings have changed"
-		eventData.value += "cancelled"
-	} else if (source == "manualOverride") {
-		eventData.descriptionText += " because the dimmer was manually turned off"
-		eventData.value += "cancelled"
-	}
-
-	sendControllerEvent(eventData)
-	sendTimeRemainingEvent(0)
-}
-
-def sendTimeRemainingEvent(percentComplete) {
-	log.trace "sendTimeRemainingEvent(${percentComplete})"
-
-	def percentCompleteEventData = [
-			name: "percentComplete",
-			value: percentComplete as int,
-			displayed: true,
-			isStateChange: true
-	]
-	sendControllerEvent(percentCompleteEventData)
-
-	def duration = sanitizeInt(duration, 30)
-	def timeRemaining = duration - (duration * (percentComplete / 100))
-	def timeRemainingEventData = [
-			name: "timeRemaining",
-			value: displayableTime(timeRemaining),
-			displayed: true,
-			isStateChange: true
-	]
-	sendControllerEvent(timeRemainingEventData)
-}
-
-def sendControllerEvent(eventData) {
-	def controller = getController()
-	if (controller) {
-		controller.controllerEvent(eventData)
-	}
-}
-
-def getController() {
-	def dni = state.controllerDni
-	if (!dni) {
-		log.warn "no controller dni"
-		return null
-	}
-	def controller = getChildDevice(dni)
-	if (!controller) {
-		log.warn "no controller"
-		return null
-	}
-	log.debug "controller: ${controller}"
-	return controller
-}
-
 // ========================================================
 // Setting levels
 // ========================================================
@@ -540,8 +349,6 @@ def updateDimmers(percentComplete) {
 
 		}
 	}
-
-	sendTimeRemainingEvent(percentComplete)
 }
 
 int dynamicLevel(dimmer, percentComplete) {
@@ -570,7 +377,7 @@ private completion() {
 		return
 	}
 
-	stop("schedule")
+	stop()
 
 	handleCompletionSwitches()
 
@@ -578,7 +385,6 @@ private completion() {
 
 	handleCompletionModesAndPhrases()
 
-	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {
@@ -687,65 +493,22 @@ def completionPercentage() {
 		return
 	}
 
-	def now = new Date().getTime()
-	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
-	def percentComplete = timeElapsed / totalRunTime * 100
-	log.debug "percentComplete: ${percentComplete}"
+	int now = new Date().getTime()
+	int diff = now - atomicState.start
+	int totalRunTime = totalRunTimeMillis()
+	int percentOfRunTime = (diff / totalRunTime) * 100
+	log.debug "percentOfRunTime: ${percentOfRunTime}"
 
-	return percentComplete
+	percentOfRunTime
 }
 
 int totalRunTimeMillis() {
 	int minutes = sanitizeInt(duration, 30)
-	convertToMillis(minutes)
-}
-
-int convertToMillis(minutes) {
 	def seconds = minutes * 60
 	def millis = seconds * 1000
-	return millis
+	return millis as int
 }
 
-def timeRemaining(percentComplete) {
-	def normalizedPercentComplete = percentComplete / 100
-	def duration = sanitizeInt(duration, 30)
-	def timeElapsed = duration * normalizedPercentComplete
-	def timeRemaining = duration - timeElapsed
-	return timeRemaining
-}
-
-int millisToEnd(percentComplete) {
-	convertToMillis(timeRemaining(percentComplete))
-}
-
-String displayableTime(timeRemaining) {
-	def timeString = "${timeRemaining}"
-	def parts = timeString.split(/\./)
-	if (!parts.size()) {
-		return "0:00"
-	}
-	def minutes = parts[0]
-	if (parts.size() == 1) {
-		return "${minutes}:00"
-	}
-	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padRight(2, "0")
-	return "${minutes}:${seconds}"
-}
-
-def jumpTo(percentComplete) {
-	def millisToEnd = millisToEnd(percentComplete)
-	def endTime = new Date().getTime() + millisToEnd
-	def duration = sanitizeInt(duration, 30)
-	def durationMillis = convertToMillis(duration)
-	def shiftedStart = endTime - durationMillis
-	atomicState.start = shiftedStart
-	updateDimmers(percentComplete)
-	sendTimeRemainingEvent(percentComplete)
-}
-
-
 int dynamicEndLevel() {
 	if (usesOldSettings()) {
 		if (direction && direction == "Down") {
@@ -910,13 +673,7 @@ def schedulingHrefDescription() {
 
 	def descriptionParts = []
 	if (days) {
-		if (days == weekdays()) {
-			descriptionParts << "On weekdays,"
-		} else if (days == weekends()) {
-			descriptionParts << "On weekends,"
-		} else {
-			descriptionParts << "On ${fancyString(days)},"
-		}
+		descriptionParts << "On ${fancyString(days)},"
 	}
 
 	descriptionParts << "${fancyDeviceString(dimmers)} will start dimming"
@@ -1002,15 +759,15 @@ def completionHrefDescription() {
 
 def numbersPageHrefDescription() {
 	def title = "All dimmers will dim for ${duration ?: '30'} minutes from ${startLevelLabel()} to ${endLevelLabel()}"
-	if (colorize) {
-		def colorDimmers = dimmersWithSetColorCommand()
-		if (colorDimmers == dimmers) {
-			title += " and will gradually change color."
-		} else {
-			title += ".\n${fancyDeviceString(colorDimmers)} will gradually change color."
-		}
-	}
-	return title
+    if (colorize) {
+			def colorDimmers = dimmersWithSetColorCommand()
+			if (colorDimmers == dimmers) {
+				title += " and will gradually change color."
+			} else {
+				title += ".\n${fancyDeviceString(colorDimmers)} will gradually change color."
+			}
+    }
+    return title
 }
 
 def hueSatToHex(h, s) {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -23,8 +23,7 @@ definition(
 	description: "Allows you to connect your Philips Hue lights with SmartThings and control them from your Things area or Dashboard in the SmartThings Mobile app. Adjust colors by going to the Thing detail screen for your Hue lights (tap the gear on Hue tiles).\n\nPlease update your Hue Bridge first, outside of the SmartThings app, using the Philips Hue app.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png"
 )
 
 preferences {
@@ -144,7 +143,7 @@ def bulbDiscovery() {
     if (numFound == 0)
     	app.updateSetting("selectedBulbs", "") 
         
-	if((bulbRefreshCount % 5) == 0) {
+	if((bulbRefreshCount % 3) == 0) {
 		discoverHueBulbs()
 	}
 
@@ -258,8 +257,8 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
+    unschedule()
 	unsubscribe() 
-    unschedule()    
 	initialize()
 }
 
@@ -319,21 +318,18 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-                if (newHueBulb != null) {
-                    if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") ) {
-                        d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-                    } else {
-                        d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-                    }
-                    log.debug "created ${d.displayName} with id $dni"
-                } else {
-                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-                }
+				if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light")) {
+					d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+				} else {
+					d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
+				}
 			} else { 
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
 			}
+
+			log.debug "created ${d.displayName} with id $dni"
 			d.refresh()
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
@@ -608,22 +604,23 @@ def parse(childDevice, description) {
 	}
 }
 
-def on(childDevice) {
+def on(childDevice, transition_deprecated = 0) {
 	log.debug "Executing 'on'"
-	put("lights/${getId(childDevice)}/state", [on: true])
-    return "Bulb is On"
+    def percent = childDevice.device?.currentValue("level") as Integer
+	def level = Math.min(Math.round(percent * 255 / 100), 255)
+	put("lights/${getId(childDevice)}/state", [bri: level, on: true])
+    return "level: $percent"
 }
 
-def off(childDevice) {
+def off(childDevice, transition_deprecated = 0) {
 	log.debug "Executing 'off'"
 	put("lights/${getId(childDevice)}/state", [on: false])
-    return "Bulb is Off"
+    return "level: 0"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-    def level 
-    if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
+	def level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
 
@@ -639,7 +636,7 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColor(childDevice, huesettings) {
+def setColor(childDevice, huesettings, alert_deprecated = "", transition_deprecated = 0) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
@@ -648,7 +645,7 @@ def setColor(childDevice, huesettings) {
 
 	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
 	if (huesettings.level != null) {
-        if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
+		value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
 		value.on = value.bri > 0
 	}
 
@@ -726,6 +723,8 @@ private getBridgeIP() {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
             if (!bridge) { 
+            	//failed because mac address sent from hub is wrong and doesn't match the hue's real mac address and serial number
+                //in this case we will look up the bridge by comparing the incorrect mac addresses
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {
@@ -774,4 +773,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -98,15 +98,6 @@ def installed() {
 }
 
 def updated() {
-	def currentDeviceIds = settings.collect { k, devices -> devices }.flatten().collect { it.id }.unique()
-	def subscriptionDevicesToRemove = app.subscriptions*.device.findAll { device ->
-		!currentDeviceIds.contains(device.id)
-	}
-	subscriptionDevicesToRemove.each { device ->
-		log.debug "Removing $device.displayName subscription"
-		state.remove(device.id)
-		unsubscribe(device)
-	}
 	log.debug settings
 }
 

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -22,8 +22,7 @@ definition(
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/life360.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/life360@2x.png",
-    oauth: [displayName: "Life360", displayLink: "Life360"],
-    singleInstance: true
+    oauth: [displayName: "Life360", displayLink: "Life360"]
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
@@ -592,7 +591,7 @@ def updated() {
         	// log.debug "External Id=${app.id}:${member.id}"
        
        		// create the device
-       		def childDevice = addChildDevice("smartthings", "Life360 User", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
+       		def childDevice = addChildDevice("smartthings", "life360-user", "${app.id}.${member.id}",null,[name:member.firstName, completedSetup: true])
             // childDevice.setMemberId(member.id)
         
         	if (childDevice)

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -5,23 +5,22 @@
  *
  */
 definition(
-		name: "LIFX (Connect)",
-		namespace: "smartthings",
-		author: "LIFX",
-		description: "Allows you to use LIFX smart light bulbs with SmartThings.",
-		category: "Convenience",
-		iconUrl: "https://cloud.lifx.com/images/lifx.png",
-		iconX2Url: "https://cloud.lifx.com/images/lifx.png",
-		iconX3Url: "https://cloud.lifx.com/images/lifx.png",
-		oauth: true,
-		singleInstance: true) {
-	appSetting "clientId"
-	appSetting "clientSecret"
-}
+	name: "LIFX (Connect)",
+	namespace: "smartthings",
+	author: "LIFX",
+	description: "Allows you to use LIFX smart light bulbs with SmartThings.",
+	category: "Convenience",
+	iconUrl: "https://cloud.lifx.com/images/lifx.png",
+	iconX2Url: "https://cloud.lifx.com/images/lifx.png",
+	iconX3Url: "https://cloud.lifx.com/images/lifx.png",
+	oauth: true) {
+		appSetting "clientId"
+		appSetting "clientSecret"
+	}
 
 
 preferences {
-	page(name: "Credentials", title: "LIFX", content: "authPage", install: true)
+	page(name: "Credentials", title: "LIFX", content: "authPage", install: false)
 }
 
 mappings {
@@ -33,29 +32,29 @@ mappings {
 	path("/test") { action: [ GET: "oauthSuccess" ] }
 }
 
-def getServerUrl()               { return "https://graph.api.smartthings.com" }
-def getCallbackUrl()             { return "https://graph.api.smartthings.com/oauth/callback"}
-def apiURL(path = '/') 			 { return "https://api.lifx.com/v1${path}" }
-def getSecretKey()               { return appSettings.secretKey }
-def getClientId()                { return appSettings.clientId }
+def getServerUrl() { return "https://graph.api.smartthings.com" }
+def apiURL(path = '/') { return "https://api.lifx.com/v1beta1${path}" }
+def buildRedirectUrl(page) {
+	return "${serverUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/${page}"
+}
 
 def authPage() {
-	log.debug "authPage test1"
+	log.debug "authPage"
 	if (!state.lifxAccessToken) {
 		log.debug "no LIFX access token"
 		// This is the SmartThings access token
 		if (!state.accessToken) {
 			log.debug "no access token, create access token"
-			state.accessToken = createAccessToken() // predefined method
+			createAccessToken() // predefined method
 		}
 		def description = "Tap to enter LIFX credentials"
-		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
+		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}" // this triggers oauthInit() below
+		log.debug "app id: ${app.id}"
 		log.debug "redirect url: ${redirectUrl}"
-		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
+		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:false) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
+				// href(url:buildRedirectUrl("test"), title: "Message test")
 			}
 		}
 	} else {
@@ -63,15 +62,17 @@ def authPage() {
 
 		def options = locationOptions() ?: []
 		def count = options.size()
+        def refreshInterval = 3
 
-		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
+		return dynamicPage(name:"Credentials", title:"Select devices...", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Select your location") {
-				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options, submitOnChange: true
+				input "selectedLocationId", "enum", required:true, title:"Select location (${count} found)", multiple:false, options:options
 			}
 		}
 	}
 }
 
+
 // OAuth
 
 def oauthInit() {
@@ -110,7 +111,7 @@ def oauthCallback() {
 }
 
 def oauthReceiveToken(redirectUrl = null) {
-	// Not sure what redirectUrl is for
+
 	log.debug "receiveToken - params: ${params}"
 	def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code, scope: params.scope ] // how is params.code valid here?
 	def params = [
@@ -133,25 +134,25 @@ def oauthReceiveToken(redirectUrl = null) {
 
 def oauthSuccess() {
 	def message = """
-		<p>Your LIFX Account is now connected to SmartThings!</p>
-		<p>Click 'Done' to finish setup.</p>
-	"""
+        <p>Your LIFX Account is now connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
 def oauthFailure() {
 	def message = """
-		<p>The connection could not be established!</p>
-		<p>Click 'Done' to return to the menu.</p>
-	"""
+        <p>The connection could not be established!</p>
+        <p>Click 'Done' to return to the menu.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
 def oauthReceivedToken() {
 	def message = """
-		<p>Your LIFX Account is already connected to SmartThings!</p>
-		<p>Click 'Done' to finish setup.</p>
-	"""
+        <p>Your LIFX Account is already connected to SmartThings!</p>
+        <p>Click 'Done' to finish setup.</p>
+    """
 	oauthConnectionStatus(message)
 }
 
@@ -159,74 +160,74 @@ def oauthConnectionStatus(message, redirectUrl = null) {
 	def redirectHtml = ""
 	if (redirectUrl) {
 		redirectHtml = """
-			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-		"""
+            <meta http-equiv="refresh" content="3; url=${redirectUrl}" />
+        """
 	}
 
 	def html = """
-		<!DOCTYPE html>
-		<html>
-		<head>
-		<meta name="viewport" content="width=device-width">
-		<title>SmartThings Connection</title>
-		<style type="text/css">
-			@font-face {
-				font-family: 'Swiss 721 W01 Thin';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			@font-face {
-				font-family: 'Swiss 721 W01 Light';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-					 url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			.container {
-				width: 280;
-				padding: 20px;
-				text-align: center;
-			}
-			img {
-				vertical-align: middle;
-			}
-			img:nth-child(2) {
-				margin: 0 15px;
-			}
-			p {
-				font-size: 1.2em;
-				font-family: 'Swiss 721 W01 Thin';
-				text-align: center;
-				color: #666666;
-				padding: 0 20px;
-				margin-bottom: 0;
-			}
-			span {
-				font-family: 'Swiss 721 W01 Light';
-			}
-		</style>
-		${redirectHtml}
-		</head>
-		<body>
-			<div class="container">
-				<img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
-				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
-				<img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
-				<p>
-					${message}
-				</p>
-			</div>
-		</body>
-		</html>
-	"""
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width">
+        <title>SmartThings Connection</title>
+        <style type="text/css">
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 280;
+                padding: 20px;
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 15px;
+            }
+            p {
+                font-size: 1.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                padding: 0 20px;
+                margin-bottom: 0;
+            }
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        ${redirectHtml}
+        </head>
+        <body>
+            <div class="container">
+                <img src='https://cloud.lifx.com/images/lifx.png' alt='LIFX icon' width='100'/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png' alt='connected device icon' width="40"/>
+                <img src='https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png' alt='SmartThings logo' width="100"/>
+                <p>
+                    ${message}
+                </p>
+            </div>
+        </body>
+        </html>
+    """
 	render contentType: 'text/html', data: html
 }
 
@@ -237,6 +238,7 @@ String toQueryString(Map m) {
 // App lifecycle hooks
 
 def installed() {
+	enableCallback() // wtf does this do?
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -248,6 +250,7 @@ def installed() {
 
 // called after settings are changed
 def updated() {
+	enableCallback() // not sure what this does
 	if (!state.accessToken) {
 		createAccessToken()
 	} else {
@@ -301,36 +304,27 @@ def logErrors(options = [errorReturn: null, logObject: log], Closure c) {
 			state.remove("lifxAccessToken")
 			options.logObject.warn "Access token is not valid"
 		}
-		return options.errorReturn
+		return options.errerReturn
 	} catch (java.net.SocketTimeoutException e) {
 		options.logObject.warn "Connection timed out, not much we can do here"
-		return options.errorReturn
+		return options.errerReturn
 	}
 }
 
 def apiGET(path) {
-	try {
-		httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
-			logResponse(response)
-			return response
-		}
-	} catch (groovyx.net.http.HttpResponseException e) {
-		logResponse(e.response)
-		return e.response
+	httpGet(uri: apiURL(path), headers: apiRequestHeaders()) {response ->
+		logResponse(response)
+		return response
 	}
 }
 
 def apiPUT(path, body = [:]) {
-	try {
-		log.debug("Beginning API PUT: ${path}, ${body}")
-		httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
-			logResponse(response)
-			return response
-		}
-	} catch (groovyx.net.http.HttpResponseException e) {
-		logResponse(e.response)
-		return e.response
-	}}
+	log.debug("Beginning API PUT: ${path}, ${body}")
+	httpPutJson(uri: apiURL(path), body: new groovy.json.JsonBuilder(body).toString(), headers: apiRequestHeaders(), ) {response ->
+		logResponse(response)
+		return response
+	}
+}
 
 def devicesList(selector = '') {
 	logErrors([]) {
@@ -345,12 +339,12 @@ def devicesList(selector = '') {
 }
 
 Map locationOptions() {
+
 	def options = [:]
 	def devices = devicesList()
 	devices.each { device ->
 		options[device.location.id] = device.location.name
 	}
-	log.debug("Locations: ${options}")
 	return options
 }
 
@@ -364,32 +358,28 @@ def updateDevices() {
 		state.devices = [:]
 	}
 	def devices = devicesInLocation()
-	def selectors = []
-
-	log.debug("All selectors: ${selectors}")
-
+	def deviceIds = devices*.id
 	devices.each { device ->
 		def childDevice = getChildDevice(device.id)
-		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			log.info("Adding device ${device.id}: ${device.capabilities}")
 			def data = [
 					label: device.label,
-					level: Math.round((device.brightness ?: 1) * 100),
+					level: sprintf("%f", (device.brightness ?: 1) * 100),
 					switch: device.connected ? device.power : "unreachable",
 					colorTemperature: device.color.kelvin
 			]
-			if (device.product.capabilities.has_color) {
+			if (device.capabilities.has_color) {
 				data["color"] = colorUtil.hslToHex((device.color.hue / 3.6) as int, (device.color.saturation * 100) as int)
 				data["hue"] = device.color.hue / 3.6
 				data["saturation"] = device.color.saturation * 100
-				childDevice = addChildDevice(app.namespace, "LIFX Color Bulb", device.id, null, data)
+				childDevice = addChildDevice("smartthings", "LIFX Color Bulb", device.id, null, data)
 			} else {
-				childDevice = addChildDevice(app.namespace, "LIFX White Bulb", device.id, null, data)
+				childDevice = addChildDevice("smartthings", "LIFX White Bulb", device.id, null, data)
 			}
 		}
 	}
-	getChildDevices().findAll { !selectors.contains("${it.deviceNetworkId}") }.each {
+	getChildDevices().findAll { !deviceIds.contains(it.deviceNetworkId) }.each {
 		log.info("Deleting ${it.deviceNetworkId}")
 		deleteChildDevice(it.deviceNetworkId)
 	}
@@ -401,4 +391,4 @@ def refreshDevices() {
 	getChildDevices().each { device ->
 		device.refresh()
 	}
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,7 +34,7 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
-
+ 
 definition(
     name: "Logitech Harmony (Connect)",
     namespace: "smartthings",
@@ -43,11 +43,11 @@ definition(
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/harmony%402x.png",
-    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"],
-    singleInstance: true
+    oauth: [displayName: "Logitech Harmony", displayLink: "http://www.logitech.com/en-us/harmony-remotes"]    
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
+	appSetting "callbackUrl"
 }
 
 preferences(oauthPage: "deviceAuthorization") {
@@ -89,18 +89,16 @@ mappings {
 }
 
 def getServerUrl() { return "https://graph.api.smartthings.com" }
-def getCallbackUrl() { "https://graph.api.smartthings.com/oauth/callback" }
-def getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" }
 
 def authPage() {
-    def description = null
+    def description = null          
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
 			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
-        def redirectUrl = buildRedirectUrl
+        def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}"
         return dynamicPage(name: "Credentials", title: "Harmony", nextPage: null, uninstall: true, install:false) {
                section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
         }
@@ -112,7 +110,7 @@ def authPage() {
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
-
+        
 		def numFoundHub = huboptions.size() ?: 0
         def numFoundAct = actoptions.size() ?: 0
 		if((deviceRefreshCount % 5) == 0) {
@@ -122,14 +120,13 @@ def authPage() {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-            // Virtual activity flag
-            if (numFoundHub > 0 && numFoundAct > 0 && true)
+            if (numFoundHub > 0 && numFoundAct > 0 && false)
 			section("You can also add activities as virtual switches for other convenient integrations") {
 				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
-			}
+			}     
             if (state.resethub)
-			section("Connection to the hub timed out. Please restart the hub and try again.") {}
-		}
+			section("Connection to the hub timed out. Please restart the hub and try again.") {}     
+		}                       
     }
 }
 
@@ -141,7 +138,7 @@ def callback() {
 	} else {
 		log.warn "No authQueryString"
 	}
-
+	
 	if (state.HarmonyAccessToken) {
 		log.debug "Access token already exists"
 		discovery()
@@ -166,8 +163,8 @@ def callback() {
 
 def init() {
 	log.debug "Requesting Code"
-	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${callbackUrl}" ]
-	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
+    def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${appSettings.callbackUrl}" ]
+    redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
@@ -177,7 +174,7 @@ def receiveToken(redirectUrl = null) {
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
     ]
 	try {
-        httpPost(params) { response ->
+        httpPost(params) { response -> 
             state.HarmonyAccessToken = response.data.access_token
         }
 	} catch (java.util.concurrent.TimeoutException e) {
@@ -224,7 +221,7 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
-
+	
     def html = """
         <!DOCTYPE html>
         <html>
@@ -305,28 +302,30 @@ def buildRedirectUrl(page) {
 }
 
 def installed() {
+	enableCallback()	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {
+	} else {	
 		initialize()
 	}
 }
 
 def updated() {
 	unsubscribe()
-  unschedule()
+    unschedule()
+	enableCallback()	
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
-	} else {
+	} else {	
 		initialize()
-	}
+	}   
 }
 
 def uninstalled() {
 	if (state.HarmonyAccessToken) {
-		try {
+		try {	
         	state.HarmonyAccessToken = ""
         	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
@@ -340,7 +339,7 @@ def initialize() {
 	if (selectedhubs || selectedactivities) {
 		addDevice()
         runEvery5Minutes("discovery")
-	}
+	}	
 }
 
 def getHarmonydevices() {
@@ -360,20 +359,20 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each {
+        	it.value.response.data.activities.each { 
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
-           }
+           }            
         }
         state.HarmonyHubs = hubs
-        state.HarmonyActivities = activities
-    }
+        state.HarmonyActivities = activities              
+    }    
 }
 
 //CHILD DEVICE METHODS
 def discovery() {
-    def Params = [auth: state.HarmonyAccessToken]
+    def Params = [auth: state.HarmonyAccessToken]	    
     def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
@@ -385,11 +384,11 @@ def discovery() {
                 poll()
 	        } else {
             	log.debug "Error: $response.status"
-            }
+            }    
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
-            state.remove("HarmonyAccessToken")
+            state.remove("HarmonyAccessToken")        
             log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
@@ -397,12 +396,12 @@ def discovery() {
         state.resethub = true
  	} catch (e) {
 		log.warn "Hostname in certificate didn't match. Please try again later."
-	}
+	}	          
     return null
 }
 
 def addDevice() {
-    log.trace "Adding Hubs"
+    log.trace "Adding Hubs" 
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -413,8 +412,8 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }
-    log.trace "Adding Activities"
+    }  
+    log.trace "Adding Activities" 
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
@@ -425,7 +424,7 @@ def addDevice() {
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }
-    }
+    }    
 }
 
 def activity(dni,mode) {
@@ -433,26 +432,26 @@ def activity(dni,mode) {
     def msg = "Command failed"
     def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
-    } else {
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"  
+    } else {    
         def aux = dni.split('-')
         def hubId = aux[1]
-        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
+        if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){	
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}" 
         } else {
             def activityId = aux[2]
         	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
-	}
+	}     
 	try {
-    	httpPostJson(uri: url) { response ->
+    	httpPostJson(uri: url) { response -> 
         	if (response.data.code == 200 || dni == "all") {
             	msg = "Command sent succesfully"
-            	state.aux = 0
+            	state.aux = 0 
             } else {
             	msg = "Command failed. Error: $response.data.code"
             }
-		}
+		} 
     } catch (groovyx.net.http.HttpResponseException ex) {
         log.error ex
         if (state.aux == 0) {
@@ -460,7 +459,7 @@ def activity(dni,mode) {
         	activity(dni,mode)
         } else {
         	msg = ex
-            state.aux = 0
+            state.aux = 0 
         }
     } catch(Exception ex) {
     	msg = ex
@@ -473,10 +472,10 @@ def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]	    
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 def map = [:]
                 response.data.hubs.each {
 		            if (it.value.message == "OK") {
@@ -489,20 +488,20 @@ def poll() {
 	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
 	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
 	                        }
-	                    }
+	                    }   
 	                } else {
 		                log.trace it.value.message
-	                }
+	                }   
                 }
-                def activities = getChildDevices()
+                def activities = getChildDevices() 
                 def activitynotrunning = true
                 activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-')
+                    def act = activity.deviceNetworkId.split('-') 
                     if (act.size() > 2) {
                         def aux = map.find { it.key == act[1] }
                         if (aux) {
                             def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)
+                            def childDevice = getChildDevice(activity.deviceNetworkId)                   
                             if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
                                 childDevice?.sendEvent(name: "switch", value: "on")
                                 if (aux2[1] == "1")
@@ -512,30 +511,30 @@ def poll() {
                                 if (aux2[1] == "3")
                                     runIn(5, "poll", [overwrite: true])
                             }
-                        }
-                    }
+                        } 
+                    }    
                 }
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
             if (e.statusCode == 401) { // token is expired
-                state.remove("HarmonyAccessToken")
+                state.remove("HarmonyAccessToken")        
                 return "Harmony Access token has expired"
-            }
+            }    
 		} catch(Exception e) {
         	log.trace e
 		}
-	}
+	}        
 }
 
 
 def getActivityList() {
 	// GET ACTIVITY'S NAME
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]	    
         def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 response.data.hubs.each {
                     def hub = getChildDevice("harmony-${it.key}")
                     if (hub) {
@@ -548,10 +547,10 @@ def getActivityList() {
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
                             log.trace activities
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+                        }    
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)   		
 					}
-                }
+                }    
             }
         } catch (groovyx.net.http.HttpResponseException e) {
         	log.trace e
@@ -560,7 +559,7 @@ def getActivityList() {
 		} catch(Exception e) {
         	log.trace e
 		}
-    }
+    }    
 	return activity
 }
 
@@ -568,16 +567,16 @@ def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]	    
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 actname = response.data.data.activities[activity].name
             }
 		} catch(Exception e) {
         	log.trace e
 		}
-    }
+    }    
 	return actname
 }
 
@@ -585,19 +584,19 @@ def getActivityId(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actid = activity
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]	    
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/all?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
             	response.data.data.activities.each {
                 	if (it.value.name == activity)
                 		actid = it.key
-                }
+                }   
             }
 		} catch(Exception e) {
         	log.trace e
 		}
-    }
+    }    
 	return actid
 }
 
@@ -605,16 +604,16 @@ def getHubName(hubId) {
 	// GET HUB'S NAME
     def hubname = hubId
     if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]	    
         def url = "https://home.myharmony.com/cloudapi/hub/${hubId}/discover?${toQueryString(Params)}"
         try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response -> 
                 hubname = response.data.data.name
             }
 		} catch(Exception e) {
         	log.trace e
-		}
-    }
+		}     
+    }    
 	return hubname
 }
 
@@ -625,8 +624,8 @@ def sendNotification(msg) {
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
     log.debug "request = ${request}"
-
-    def json = request.JSON
+    
+    def json = request.JSON 
 
 	def html = """{"code":200,"message":"OK"}"""
 	render contentType: 'application/json', data: html
@@ -660,16 +659,12 @@ def updateDevice() {
 	} else {
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
+			if (arguments) {
+				device."$command"(*arguments)
+			} else {
+				device."$command"()
 			}
+			render status: 204, data: "{}"
 		} else {
 			render status: 404, data: '{"msg": "Device not found"}'
 		}

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -49,7 +49,6 @@ preferences {
 	section("Via a push notification and/or an SMS message"){
         input("recipients", "contact", title: "Send notifications to") {
             input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
-            paragraph "If outside the US please make sure to enter the proper country code"
             input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
         }
 	}

smartapps/smartthings/samsung-tv-connect.src/samsung-tv-connect.groovy

@@ -22,8 +22,7 @@ definition(
 	description: "Allows you to control your Samsung TV from the SmartThings app. Perform basic functions like power Off, source, volume, channels and other remote control functions.",
 	category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png",
-    singleInstance: true
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Samsung/samsung-remote%403x.png"
 )
 
 preferences {

smartapps/smartthings/send-ham-bridge-command-when.src/send-ham-bridge-command-when.groovy

@@ -16,8 +16,8 @@
  *
  */
 definition(
-    name: "Send HAM Bridge Command When",
-    namespace: "smartthings",
+    name: "Send HAM Bridge Command When…",
+    namespace: "soletc.com",
     author: "Scottin Pollock",
     description: "Sends a command to your HAM Bridge server when SmartThings are activated.",
     category: "Convenience",
@@ -25,6 +25,7 @@ definition(
     iconX2Url: "http://solutionsetcetera.com/stuff/STIcons/HB@2x.png"
 )
 
+
 preferences {
 	section("Choose one or more, when..."){
 		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true

smartapps/smartthings/sonos-control.src/sonos-control.groovy

@@ -10,24 +10,24 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Control
+ *  Sonos Control
  *
  *  Author: SmartThings
  *
  *  Date: 2013-12-10
  */
 definition(
-    name: "Speaker Control",
+    name: "Sonos Control",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play or pause your Speaker when certain actions take place in your home.",
+    description: "Play or pause your Sonos when certain actions take place in your home.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Control your Sonos when something happens", install: true, uninstall: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
 			input "starting", "time", title: "Starting", required: false
@@ -81,7 +81,7 @@ def mainPage() {
 			]
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
+			input "sonos", "capability.musicPlayer", title: "Sonos music player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false

smartapps/smartthings/sonos-mood-music.src/sonos-mood-music.groovy

@@ -10,7 +10,7 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Mood Music
+ *  Sonos Mood Music
  *
  *  Author: SmartThings
  *  Date: 2014-02-12
@@ -65,7 +65,7 @@ private saveSelectedSong() {
 }
 
 definition(
-    name: "Speaker Mood Music",
+    name: "Sonos Mood Music",
     namespace: "smartthings",
     author: "SmartThings",
     description: "Plays a selected song or station.",
@@ -75,7 +75,7 @@ definition(
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a selected song or station on your Speaker when something happens", nextPage: "chooseTrack", uninstall: true)
+	page(name: "mainPage", title: "Play a selected song or station on your Sonos when something happens", nextPage: "chooseTrack", uninstall: true)
 	page(name: "chooseTrack", title: "Select a song", install: true)
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -125,7 +125,7 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "volume", "number", title: "Set the volume", description: "0-100%", required: false

smartapps/smartthings/sonos-notify-with-sound.src/sonos-notify-with-sound.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Custom Message
+ *  Sonos Custom Message
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-	name: "Speaker Notify with Sound",
+	name: "Sonos Notify with Sound",
 	namespace: "smartthings",
 	author: "SmartThings",
-	description: "Play a sound or custom message through your Speaker when the mode changes or other events occur.",
+	description: "Play a sound or custom message through your Sonos when the mode changes or other events occur.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play a message on your Speaker when something happens", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play a message on your Sonos when something happens", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -75,8 +75,8 @@ def mainPage() {
 			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
 		}
 		section{
-			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				//"Custom Message",
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Custom Message", options: [
+				"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,10 +89,10 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			//input "message","text",title:"Play this message", required:false, multiple: false
+			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after notification", required: false, defaultValue: true
@@ -409,13 +409,12 @@ private loadText() {
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
 		default:
-			/*if (message) {
+			if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}*/
-			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
+			}
 			break;
 	}
 }

smartapps/smartthings/sonos-weather-forecast.src/sonos-weather-forecast.groovy

@@ -10,23 +10,23 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *  Speaker Weather Forecast
+ *  Sonos Weather Forecast
  *
  *  Author: SmartThings
  *  Date: 2014-1-29
  */
 definition(
-    name: "Speaker Weather Forecast",
+    name: "Sonos Weather Forecast",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Play a weather report through your Speaker when the mode changes or other events occur",
+    description: "Play a weather report through your Sonos when the mode changes or other events occur",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
 )
 
 preferences {
-	page(name: "mainPage", title: "Play the weather report on your speaker", install: true, uninstall: true)
+	page(name: "mainPage", title: "Play the weather report on your sonos", install: true, uninstall: true)
 	page(name: "chooseTrack", title: "Select a song or station")
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -85,7 +85,7 @@ def mainPage() {
 			)
 		}
 		section {
-			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
+			input "sonos", "capability.musicPlayer", title: "On this Sonos player", required: true
 		}
 		section("More options", hideable: true, hidden: true) {
 			input "resumePlaying", "bool", title: "Resume currently playing music after weather report finishes", required: false, defaultValue: true

smartapps/smartthings/tesla-connect.src/tesla-connect.groovy

@@ -23,8 +23,7 @@ definition(
     description: "Integrate your Tesla car with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%402x.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png",
-    singleInstance: true
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tesla-app%403x.png"
 )
 
 preferences {

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -22,8 +22,7 @@ definition(
     description: "Allows you to integrate your WeMo Switch and Wemo Motion sensor with SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png",
-    singleInstance: true
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png"
 )
 
 preferences {
@@ -62,7 +61,10 @@ def firstPage()
 
 		log.debug "REFRESH COUNT :: ${refreshCount}"
 
-		subscribe(location, null, locationHandler, [filterEvents:false])
+		if(!state.subscribe) {
+			subscribe(location, null, locationHandler, [filterEvents:false])
+			state.subscribe = true
+		}
 
 		//ssdp request every 25 seconds
 		if((refreshCount % 5) == 0) {
@@ -78,7 +80,7 @@ def firstPage()
 		def motionsDiscovered = motionsDiscovered()
 		def lightSwitchesDiscovered = lightSwitchesDiscovered()
 
-		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
+		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: selectedSwitches != null || selectedMotions != null || selectedLightSwitches != null) {
 			section("Select a device...") {
 				input "selectedSwitches", "enum", required:false, title:"Select Wemo Switches \n(${switchesDiscovered.size() ?: 0} found)", multiple:true, options:switchesDiscovered
 				input "selectedMotions", "enum", required:false, title:"Select Wemo Motions \n(${motionsDiscovered.size() ?: 0} found)", multiple:true, options:motionsDiscovered
@@ -166,30 +168,21 @@ def getWemoLightSwitches()
 def installed() {
 	log.debug "Installed with settings: ${settings}"
 	initialize()
+
+	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
+	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
+	runIn(900, "doDeviceSync" , [overwrite: false]) //setup ip:port syncing every 15 minutes
+
+	// SUBSCRIBE responses come back with TIMEOUT-1801 (30 minutes), so we refresh things a bit before they expire (29 minutes)
+	runIn(1740, "refresh", [overwrite: false])
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
 	initialize()
-}
 
-def initialize() {
-	unsubscribe()
-    unschedule()
-	subscribe(location, null, locationHandler, [filterEvents:false])
-
-	if (selectedSwitches)
-		addSwitches()
-
-	if (selectedMotions)
-		addMotions()
-
-	if (selectedLightSwitches)
-		addLightSwitches()
-
-	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
-	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
-    runEvery5Minutes("refresh")
+	runIn(5, "subscribeToDevices") //subscribe again to new/old devices wait 5 seconds
+	runIn(10, "refreshDevices") //refresh devices again, delayed by 10 seconds
 }
 
 def resubscribe() {
@@ -199,7 +192,8 @@ def resubscribe() {
 
 def refresh() {
 	log.debug "refresh() called"
-    doDeviceSync()
+	//reschedule the refreshes
+	runIn(1740, "refresh", [overwrite: false])
 	refreshDevices()
 }
 
@@ -242,8 +236,7 @@ def addSwitches() {
 							"port": selectedSwitch.value.port
 					]
 			])
-      def ipvalue = convertHexToIP(selectedSwitch.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+
 			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -273,9 +266,8 @@ def addMotions() {
 					"port": selectedMotion.value.port
 				]
 			])
-      def ipvalue = convertHexToIP(selectedMotion.value.ip)
-      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-      log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+
+			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
 		}
@@ -304,8 +296,7 @@ def addLightSwitches() {
 					"port": selectedLightSwitch.value.port
 				]
 			])
-      def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 		   log.debug "found ${d.displayName} with id $dni already exists"
@@ -313,6 +304,27 @@ def addLightSwitches() {
 	}
 }
 
+def initialize() {
+	// remove location subscription afterwards
+	 unsubscribe()
+	 state.subscribe = false
+
+	if (selectedSwitches)
+	{
+		addSwitches()
+	}
+
+	if (selectedMotions)
+	{
+		addMotions()
+	}
+
+	if (selectedLightSwitches)
+	{
+		addLightSwitches()
+	}
+}
+
 def locationHandler(evt) {
 	def description = evt.description
 	def hub = evt?.hubId
@@ -321,32 +333,53 @@ def locationHandler(evt) {
     log.debug parsedEvent
 
 	if (parsedEvent?.ssdpTerm?.contains("Belkin:device:controllee") || parsedEvent?.ssdpTerm?.contains("Belkin:device:insight")) {
+
 		def switches = getWemoSwitches()
-		if (!(switches."${parsedEvent.ssdpUSN.toString()}")) {
-        	//if it doesn't already exist
+
+		if (!(switches."${parsedEvent.ssdpUSN.toString()}"))
+		{ //if it doesn't already exist
 			switches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		} else {
+		}
+		else
+		{ // just update the values
+
 			log.debug "Device was already found in state..."
+
 			def d = switches."${parsedEvent.ssdpUSN.toString()}"
 			boolean deviceChangedValues = false
-			log.debug "$d.ip <==> $parsedEvent.ip"
+
 			if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
 				d.ip = parsedEvent.ip
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
-                def child = getChildDevice(parsedEvent.mac)
-				child.subscribe(parsedEvent.ip, parsedEvent.port)
-                child.poll()
 			}
+
+			if (deviceChangedValues) {
+				def children = getChildDevices()
+				log.debug "Found children ${children}"
+				children.each {
+					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
+						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
+						it.subscribe(parsedEvent.ip, parsedEvent.port)
+					}
+				}
+			}
+
 		}
+
 	}
 	else if (parsedEvent?.ssdpTerm?.contains("Belkin:device:sensor")) {
+
 		def motions = getWemoMotions()
-		if (!(motions."${parsedEvent.ssdpUSN.toString()}")) {
-        	//if it doesn't already exist
+
+		if (!(motions."${parsedEvent.ssdpUSN.toString()}"))
+		{ //if it doesn't already exist
 			motions << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		} else { // just update the values
+		}
+		else
+		{ // just update the values
+
 			log.debug "Device was already found in state..."
 
 			def d = motions."${parsedEvent.ssdpUSN.toString()}"
@@ -379,7 +412,10 @@ def locationHandler(evt) {
 		if (!(lightSwitches."${parsedEvent.ssdpUSN.toString()}"))
 		{ //if it doesn't already exist
 			lightSwitches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
-		} else {
+		}
+		else
+		{ // just update the values
+
 			log.debug "Device was already found in state..."
 
 			def d = lightSwitches."${parsedEvent.ssdpUSN.toString()}"
@@ -390,11 +426,21 @@ def locationHandler(evt) {
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
-				def child = getChildDevice(parsedEvent.mac)
-				log.debug "updating ip and port, and resubscribing, for device with mac ${parsedEvent.mac}"
-				child.subscribe(parsedEvent.ip, parsedEvent.port)
 			}
+
+			if (deviceChangedValues) {
+				def children = getChildDevices()
+				log.debug "Found children ${children}"
+				children.each {
+					if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
+						log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
+						it.subscribe(parsedEvent.ip, parsedEvent.port)
+					}
+				}
+			}
+
 		}
+
 	}
 	else if (parsedEvent.headers && parsedEvent.body) {
 		String headerString = new String(parsedEvent.headers.decodeBase64())?.toLowerCase()
@@ -534,30 +580,73 @@ private def parseDiscoveryMessage(String description) {
 			}
 		}
 	}
+
 	device
 }
 
 def doDeviceSync(){
 	log.debug "Doing Device Sync!"
+	runIn(900, "doDeviceSync" , [overwrite: false]) //schedule to run again in 15 minutes
+
+	if(!state.subscribe) {
+		subscribe(location, null, locationHandler, [filterEvents:false])
+		state.subscribe = true
+	}
+
 	discoverAllWemoTypes()
 }
 
-private String convertHexToIP(hex) {
-	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+def pollChildren() {
+	def devices = getAllChildDevices()
+	devices.each { d ->
+		//only poll switches?
+		d.poll()
+	}
 }
 
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
+def delayPoll() {
+	log.debug "Executing 'delayPoll'"
+
+	runIn(5, "pollChildren")
 }
 
-private Boolean canInstallLabs() {
+/*def poll() {
+	log.debug "Executing 'poll'"
+	runIn(600, "poll", [overwrite: false]) //schedule to run again in 10 minutes
+
+	def lastPoll = getLastPollTime()
+	def currentTime = now()
+	def lastPollDiff = currentTime - lastPoll
+	log.debug "lastPoll: $lastPoll, currentTime: $currentTime, lastPollDiff: $lastPollDiff"
+	setLastPollTime(currentTime)
+
+	doDeviceSync()
+}
+
+
+def setLastPollTime(currentTime) {
+	state.lastpoll = currentTime
+}
+
+def getLastPollTime() {
+	state.lastpoll ?: now()
+}
+
+def now() {
+	new Date().getTime()
+}*/
+
+private Boolean canInstallLabs()
+{
 	return hasAllHubsOver("000.011.00603")
 }
 
-private Boolean hasAllHubsOver(String desiredFirmware) {
+private Boolean hasAllHubsOver(String desiredFirmware)
+{
 	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
 }
 
-private List getRealHubFirmwareVersions() {
+private List getRealHubFirmwareVersions()
+{
 	return location.hubs*.firmwareVersionString.findAll { it }
 }

smartapps/smartthings/withings.src/withings.groovy

@@ -24,8 +24,7 @@ definition(
     category: "Connections",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/withings.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/withings%402x.png",
-    oauth: true,
-    singleInstance: true
+    oauth: true
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/smartthings/yoics-connect.src/yoics-connect.groovy

@@ -24,8 +24,7 @@ definition(
     category: "SmartThings Internal",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png",
-    oauth: true,
-    singleInstance: true
+    oauth: true
 ) {
   appSetting "serverUrl"
 }

smartapps/sprayercontroller/sprayer-controller-2.src/sprayer-controller-2.groovy

@@ -15,7 +15,7 @@
  */
 definition(
     name: "Sprayer Controller 2",
-    namespace: "sprayercontroller",
+    namespace: "",
     author: "Cooper Lee",
     description: "Control Sprayers for a period of time a number of times per hour",
     category: "My Apps",

smartapps/wackford/quirky-connect.src/quirky-connect.groovy

@@ -58,8 +58,7 @@ definition(
     description: "Connect your Quirky to SmartThings.",
     category: "SmartThings Labs",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png",
-    singleInstance: true
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/quirky@2x.png"
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"

smartapps/wackford/tcp-bulbs-connect.src/tcp-bulbs-connect.groovy

@@ -25,8 +25,7 @@ definition(
 	description: "Connect your TCP bulbs to SmartThings using Cloud to Cloud integration. You must create a remote login acct on TCP Mobile App.",
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png",
-	singleInstance: true
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png"
 )