MSA-633: Device type for radiators heating control. Could you have a look why response("delay 1200") is not functional when returning it from parse() method? Also example provided in documentation does not work at all. http://docs.smartthings.com/en/latest/device-type-developers-guide/building-z-wave-device-handlers.html#sending-commands-in-response-to-events

Fix requirement for SMS

devicetypes/bortuzar/climax-power-outlet.src/climax-power-outlet.groovy

@@ -1,195 +0,0 @@
-/**
- *  Climax PSM-29ZBSR - Zigbee - Power Outlet Switch and Energy Meter
- *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Thanks to SmartThings and its community!
- * 
- *  Product Page: http://www.climax.com.tw/psm29zb-zb.php
- *  Developer manual https://fccid.io/document.php?id=2553357
- *
- */
-metadata {
-	definition (name: "Climax Power Outlet", namespace: "bortuzar", author: "bortuzar") {
-	
-    	capability "Actuator"
-        capability "Configuration"
-        capability "Refresh"
-		capability "Sensor"
-        capability "Switch"
-        capability "Power Meter"
-
-		fingerprint endpointId: "0x0A", profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0702", outClusters: "0000"
-	}
-    
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "power", label: '${currentValue} W'
-		}
-        
-        //standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
-		//	state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		//}
-
-		
-		main(["switch", "power"])
-		details(["switch", "power", "refresh"])
-	}
-}
-
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-
-	log.debug "Parse Method Called"
-	log.trace description
-    
-	if (description?.startsWith("catchall:")) {
-		def msg = zigbee.parse(description)
-		log.trace "data: $msg.data"
-
-	} else if (description?.startsWith("read attr -")) {
-		def descMap = parseDescriptionAsMap(description)
-        log.debug "Desc Map:"
-        log.debug descMap
-		
-        if (descMap.cluster == "0006" && descMap.attrId == "0000") {
-                name = "switch"
-                value = descMap.value.endsWith("01") ? "on" : "off"
-                def result = createEvent(name: name, value: value)
-                log.debug "Parse returned ${result?.descriptionText}"
-                return result
-        } else if(descMap.cluster =="0702" && descMap.attrId == "0400") {
-            
-            def value = convertHexToInt(descMap.value[-4..-1])/10 
-            // Reading the last 4 characters of the string...Maybe 4 are needed. Needs further test.
-            // Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-            log.debug value
-            def name = "power"
-            def result = createEvent(name: name, value: value)
-            log.debug "Parse returned ${result?.descriptionText}"
-            return result 
-        }
-    } else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
-
-def on() {
-	log.debug "On Method called"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-}
-
-def off() {
-	log.debug "Off Method called"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
-}
-
-def refresh() {
-  	log.debug "Refresh Method called";	
-    //read attribute 1024Decimal, translates to 400Hex.
-    [
-		"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",    
-        "st rattr 0x${device.deviceNetworkId} 1 0x0702 1024", , "delay 500" 
-	]
-}
-
-
-def configure() {
-
-	log.debug "Configure Method called"
-
-	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	
-	def configCmds = [	
-  
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-        
-        //bing to cluster 0x006. Switch On-Off
-        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
-        
-        //bind to cluster 0x702. Power Consumption
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0702 {${device.zigbeeId}} {}", "delay 500",
-        
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
-}
-
-
-def parseDescriptionAsMap(description) {
-	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-}
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}

devicetypes/eurotronic/eurotronic-zwave-thermostatic-valve.src/eurotronic-zwave-thermostatic-valve.groovy

@@ -0,0 +1,300 @@
+/**
+ *  Copyright 2015 Eurotronic
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "Eurotronic Z-Wave Thermostatic Valve", namespace: "Eurotronic", author: "Eurotronic") {
+		capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+        capability "Thermostat Setpoint"
+		capability "Sensor"
+        capability "Switch Level"
+        
+		command "energySave"
+        command "manual"
+        command "setWakeUpInterval", ["number"]
+        command "setEnergySavingSetpoint", ["number"]
+        
+        attribute "energySavingSetpoint", "number"
+
+		fingerprint deviceId:"0x0806", inClusters:"0x43, 0x40, 0x31, 0x20, 0x26, 0x77, 0x80, 0x84, 0x72, 0x86"
+    }
+    
+	tiles(scale: 1) {
+    	
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("a", label:'${currentValue}°', icon: "st.Weather.weather2",
+				backgroundColors:[
+					[value: 0, color: "#153591"],
+					[value: 7, color: "#1e9cbb"],
+					[value: 15, color: "#90d2a7"],
+					[value: 23, color: "#44b621"],
+					[value: 29, color: "#f1d801"],
+					[value: 35, color: "#d04e00"],
+				]
+			)
+		}
+		standardTile("mode", "device.thermostatMode") {
+			state("off", label:'${name}', action:"heat", nextState:"heat", backgroundColor:"#808080", icon:"st.Seasonal Fall.seasonal-fall-008")
+			state("heat", label:'${name}', action:"energySave", nextState:"energy save", backgroundColor:"#fdd470", icon:"st.Seasonal Winter.seasonal-winter-009")
+			state("energy save", label:'save', action:"manual", nextState:"manual", backgroundColor:"#afd574", icon:"st.Transportation.transportation1")
+            state("manual", label: '${name}', action:"off", nextState:"off", backgroundColor:"#8f00ff", icon:"st.Outdoor.outdoor18")
+		}
+        valueTile("battery", "device.battery",  width: 1, height: 1) {
+        	state ("battery", label:'${currentValue}%', unit:"%", icon: "st.Health & Wellness.health9",
+            	backgroundColors:[
+					[value: 0, color: "#ce1010"],
+					[value: 50, color: "#3535ba"],
+					[value: 100, color: "#0d740d"]
+				]
+            )
+    	}
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state "a", action:"setHeatingSetpoint", backgroundColor:"#fdd470"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint") {
+			state ("a", label:'${currentValue}°', backgroundColor:"#fdd470")
+		}
+        controlTile("energySavingControl", "device.energySavingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state ("a", action:"setEnergySavingSetpoint", backgroundColor:"#afd574")
+		}
+		valueTile("energySavingSetpoint", "device.energySavingSetpoint" ) {
+			state ("a", label:'${currentValue}°', backgroundColor:"#afd574")
+		}
+        controlTile("switchControlSlider", "device.switch", "slider", height: 1, width: 2) {
+			state ("a", action:"setLevel", backgroundColor: "#8f00ff")
+		}
+		valueTile("switchValue", "device.switch") {
+			state ("a", label:'${currentValue}%', backgroundColor:"#8f00ff")
+		}
+        
+		main "temperature"
+		details(["temperature", "mode", "battery", "heatSliderControl", "heatingSetpoint", "energySavingControl", "energySavingSetpoint", "switchControlSlider", "switchValue"])
+	}
+}
+
+def parse(String description)
+{
+	log.debug "Parse description: $description"
+    
+    def result = []
+    
+    if (state.wakeUpInterval != 240 || state.nodeid != zwaveHubNodeId) {
+    	result << response(zwave.wakeUpV2.wakeUpIntervalSet(nodeid: zwaveHubNodeId, seconds: 240))
+        result << response(zwave.wakeUpV2.wakeUpIntervalGet().format())
+    }
+    
+    def zwe = []
+    
+    if (description != "updated") {
+    	zwe = zwaveEvent(zwave.parse(description, [0x20: 1, 0x26: 3, 0x31: 4, 0x40: 2, 0x43: 2, 0x77: 1, 0x80: 1, 0x84: 2, 0x72: 1, 0x86: 1]))    	
+   	}
+    
+    return result + zwe
+}
+
+// Multilevel Switch
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd){
+	log.debug "Switch multilevel get $cmd"
+    
+    if (cmd.value == 255)
+    	cmd.value = 100
+    
+    return createEvent(name: "switch", value: cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStartLevelChange cmd){
+	log.debug "SwitchMultilevelStartLevelChange notification $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd){
+	log.debug "SwitchMultilevelStopLevelChange notification $cmd"
+}
+
+//Multilevel Sensor
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv4.SensorMultilevelReport cmd){
+	log.debug "Sensor multilevel get $cmd"
+    def map = [:]
+	if (cmd.sensorType == 1) {
+		map.value = cmd.scaledSensorValue
+		map.unit = cmd.scale
+		map.name = "temperature"
+    }
+    return createEvent(map)
+}
+
+//Thermostat
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd){
+	log.debug "Thermostat mode notification $cmd"
+    def map = [:]
+	switch (cmd.mode) {
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
+			map.value = "off"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+			map.value = "heat"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_ENERGY_SAVE_HEAT:
+			map.value = "energy save"
+			break
+		case 0x1F:
+			map.value = "manual"
+			break
+	}
+	map.name = "thermostatMode"
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd){
+	log.debug "ThermostatSetpointReport notification $cmd"
+    
+	def map = [:]
+	map.value = cmd.scaledValue
+	map.unit = cmd.scale
+	switch (cmd.setpointType) {
+		case 1:
+			map.name = "heatingSetpoint"
+			break;
+		case 11:
+			map.name = "energySavingSetpoint"
+			break;
+		default:
+			return [:]
+	}
+	// So we can respond with same format
+	state.size = cmd.size
+	state.scale = cmd.scale
+	state.precision = cmd.precision
+	return createEvent(map)
+}
+
+//Battery
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd){
+	log.debug "Battery notification $cmd"
+    return createEvent(name: "battery", value: cmd.batteryLevel)
+}
+
+//Wake up
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpIntervalReport cmd){
+	log.debug "WakeUpInterval notification $cmd"
+    state.nodeid = cmd.nodeid
+    state.wakeUpInterval = cmd.seconds
+    return createEvent(name: "wakeUpIntervalSeconds", value: cmd.seconds)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd){
+	log.debug "Wake up notification $cmd $state"
+    def result = []
+    
+    if (state.modeCommand) {
+    	result << response(state.modeCommand)
+        result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+        state.modeCommand = null
+    }
+    
+    if (state.setLevelCommand) {
+    	result << response(state.setLevelCommand)
+    	result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+        state.setLevelCommand = null
+    }
+    
+    if (state.setHeatingSetpointCommand) {
+    	result << response(state.setHeatingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    	state.setHeatingSetpointCommand = null
+    }
+    
+    if (state.setEnergySavingSetpointCommand) {
+    	result << response(state.setEnergySavingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    	state.setEnergySavingSetpointCommand = null
+    }
+    
+    //For some reason response("delay 1200") is not functional which is really bad because hub is 
+    //not able to request all the information from device which it needs. All the commands are
+    //sent at the same time. 
+    result << response(zwave.sensorMultilevelV4.sensorMultilevelGet().format())
+    result << response(zwave.batteryV1.batteryGet().format())
+    result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    //result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+    result << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+    result
+}
+
+//Unexpected
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.warn "Unexpected zwave command $cmd"
+}
+
+// Command Implementations
+def off() {
+	log.debug "Thermostat mode setting to off"
+	state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 0).format()
+}
+
+def heat() {
+	log.debug "Thermostat mode setting to heat"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 1).format()
+}
+
+def energySave() {
+	log.debug "Thermostat mode setting to energy save"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 11).format()
+}
+
+def manual() {
+	log.debug "Thermostat mode setting to manual"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 31).format()
+}
+
+def setLevel(double lvl){    
+    //by Eurotronic specification 100% is 0xFF and 99% is 0x63
+    if (lvl == 100.0)
+    	lvl = 255
+    
+    log.debug "Changing switch level to $lvl"
+
+    state.setLevelCommand = zwave.switchMultilevelV3.switchMultilevelSet(value: 256).format()
+}
+
+def setHeatingSetpoint(double sp){
+	log.debug "Setting setpoint to $sp"
+    
+	def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	1,
+        size:			2,
+   	]
+    	
+    state.setHeatingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}
+
+def setEnergySavingSetpoint(double sp){
+	log.debug "Setting energy saving setpoint to $sp"
+    
+    def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	11,
+        size:			2,
+   	]
+    	
+    state.setEnergySavingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}

smartapps/tslagle13/routine-director.src/routine-director.groovy

@@ -50,7 +50,7 @@ preferences {
         }
         section("Send Notifications?") {
             input("recipients", "contact", title: "Send notifications to") {
-                input "phone", "phone", title: "Send an SMS to this number?"
+                input "phone", "phone", title: "Send an SMS to this number?", required:false
             }
         }
 
@@ -266,7 +266,9 @@ def sendAway(msg) {
         }
         else {
         	sendPush(msg)
-            sendSms(phone, msg)
+        	if(phone){
+            		sendSms(phone, msg)
+        	}	
         }    
     }
 
@@ -280,7 +282,9 @@ def sendHome(msg) {
         }
         else {
         	sendPush(msg)
-            sendSms(phone, msg)
+                if(phone){
+            		sendSms(phone, msg)
+        	}
         }    
     }
 
@@ -339,4 +343,4 @@ private getTimeIntervalLabel() {
 
 private hideOptionsSection() {
     (starting || ending || days || modes) ? false: true
-}
+}