MSA-972: Updated Device Handler for Fibaro Smoke Sensor:

- updated tamper attrbiute,
- removed unused smoke/heat alarm events/states,
- updated tiles,
- corrected parameter values in preferences,
- added handling for more notifications (replace battery soon, system hardware failure),
- added Sensor Alarm Report handling and Sensor Alarm Get on wake up,
- added handling for received CRC16 frames,
- improved sent frame encapsulation (CRC16/Security)

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -18,9 +18,10 @@ metadata {
         capability "Sensor"
         capability "Smoke Detector" //attributes: smoke ("detected","clear","tested")
         capability "Temperature Measurement" //attributes: temperature
-        attribute "tamper", "enum", ["detected", "clear"]
-        attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
+        attribute "tamper", "enum", ["active", "inactive"]//capability "Tamper Alert"// <- yields "java.lang.RuntimeException: Metadata Error: Capability 'Tamper Alert' not found" error
+        attribute "heatAlarm", "enum", ["overheat", "inactive"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A"
     }
     simulator {
         //battery
@@ -50,7 +51,7 @@ metadata {
         input description: "Please consult Fibaro Smoke Sensor operating manual for advanced setting options. You can skip this configuration to use default settings",
                 title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
         input "smokeSensorSensitivity", "enum", title: "Smoke Sensor Sensitivity", options: ["High","Medium","Low"], defaultValue: "${smokeSensorSensitivity}", displayDuringSetup: true
-        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
+        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold","all notifications"],
                 defaultValue: "${zwaveNotificationStatus}", displayDuringSetup: true
         input "visualIndicatorNotificationStatus", "enum", title: "Visual Indicator Notifications Status",
                 options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
@@ -61,44 +62,47 @@ metadata {
         input "temperatureReportInterval", "enum", title: "Temperature Report Interval",
                 options: ["reports inactive", "5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${temperatureReportInterval}", displayDuringSetup: true
         input "temperatureReportHysteresis", "number", title: "Temperature Report Hysteresis", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
-        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 0 or 2-100 C", range: "0..100", displayDuringSetup: true
+        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
         input "excessTemperatureSignalingInterval", "enum", title: "Excess Temperature Signaling Interval",
                 options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${excessTemperatureSignalingInterval}", displayDuringSetup: true
         input "lackOfZwaveRangeIndicationInterval", "enum", title: "Lack of Z-Wave Range Indication Interval",
                 options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${lackOfZwaveRangeIndicationInterval}", displayDuringSetup: true
     }
     tiles (scale: 2){
-        multiAttributeTile(name:"smoke", type: "lighting", width: 6, height: 4){
+        multiAttributeTile(name:"FGSD", type: "lighting", width: 6, height: 4){
             tileAttribute ("device.smoke", key: "PRIMARY_CONTROL") {
                 attributeState("clear", label:"CLEAR", icon:"st.alarm.smoke.clear", backgroundColor:"#ffffff")
                 attributeState("detected", label:"SMOKE", icon:"st.alarm.smoke.smoke", backgroundColor:"#e86d13")
                 attributeState("tested", label:"TEST", icon:"st.alarm.smoke.test", backgroundColor:"#e86d13")
-                attributeState("replacement required", label:"REPLACE", icon:"st.alarm.smoke.test", backgroundColor:"#FFFF66")
                 attributeState("unknown", label:"UNKNOWN", icon:"st.alarm.smoke.test", backgroundColor:"#ffffff")
             }
-            tileAttribute ("device.battery", key: "SECONDARY_CONTROL") {
-                attributeState "battery", label:'Battery: ${currentValue}%', unit:"%"
-            }
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
         }
         valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "battery", label:'${currentValue}% battery', unit:"%"
         }
-        valueTile("temperature", "device.temperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "temperature", label:'${currentValue}°', unit:"C"
-        }
-        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "clear", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
-            state "overheat detected", label:'OVERHEAT DETECTED', backgroundColor:"#ffffff"
-            state "rapid temperature rise", label:'RAPID TEMP RISE', backgroundColor:"#ffffff"
-            state "underheat detected", label:'UNDERHEAT DETECTED', backgroundColor:"#ffffff"
-        }
-        valueTile("tamper", "device.tamper", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "clear", label:'NO TAMPER', backgroundColor:"#ffffff"
-            state "detected", label:'TAMPER DETECTED', backgroundColor:"#ffffff"
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, width: 2, height: 2) {
+            state "inactive", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
+            state "overheat", label:'OVERHEAT DETECTED', backgroundColor:"#bc2323"
         }
 
-        main "smoke"
-        details(["smoke","temperature"])
+        main "FGSD"
+        details(["FGSD","temperature", "battery", "heatAlarm"])
     }
 }
 
@@ -117,7 +121,7 @@ def parse(String description) {
                         "If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
     } else if (description != "updated") {
         log.debug "parse() >> zwave.parse(description)"
-        def cmd = zwave.parse(description, [0x31: 5, 0x71: 3, 0x84: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x5A: 1, 0x71: 3, 0x72: 2, 0x84: 1, 0x86: 1, 0x8B: 1, 0x9C: 1])
         if (cmd) {
             result = zwaveEvent(cmd)
         }
@@ -126,14 +130,40 @@ def parse(String description) {
     return result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
-    log.info "Executing zwaveEvent 86 (VersionV1): 12 (VersionReport) with cmd: $cmd"
-    def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
-    updateDataValue("fw", fw)
-    def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
-    createEvent(descriptionText: text, isStateChange: false)
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+    setSecured()
+    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x5A: 1, 0x71: 3, 0x84: 1, 0x9C: 1])
+    if (encapsulatedCommand) {
+        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
+        zwaveEvent(encapsulatedCommand)
+    } else {
+        log.warn "Unable to extract encapsulated cmd from $cmd"
+        createEvent(descriptionText: cmd.toString())
+    }
 }
 
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x86: 1, 0x8B: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+    log.info "Executing zwaveEvent 86 (VersionV1): 12 (VersionReport) with cmd: $cmd"
+    def version = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+    updateDataValue("version", fw)
+    def text = "$device.displayName: firmware version: $version, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+    createEvent(descriptionText: text, isStateChange: false)
+}
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
     def map = [ name: "battery", unit: "%" ]
@@ -161,18 +191,6 @@ def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejec
     createEvent(displayed: true, descriptionText: "$device.displayName rejected the last request")
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-    setSecured()
-    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x71: 3, 0x84: 1])
-    if (encapsulatedCommand) {
-        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
-        zwaveEvent(encapsulatedCommand)
-    } else {
-        log.warn "Unable to extract encapsulated cmd from $cmd"
-        createEvent(descriptionText: cmd.toString())
-    }
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
     log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
     setSecured()
@@ -199,18 +217,31 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     if (cmd.notificationType == 7) {
         switch (cmd.event) {
             case 0:
-                result << createEvent(name: "tamper", value: "clear", displayed: false)
+                result << createEvent(name: "tamper", value: "inactive", displayed: false)
                 break
             case 3:
-                result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName casing was opened")
+                result << createEvent(name: "tamper", value: "active", descriptionText: "$device.displayName casing was opened")
                 break
         }
     } else if (cmd.notificationType == 1) { //Smoke Alarm (V2)
         log.debug "notificationv3.NotificationReport: for Smoke Alarm (V2)"
         result << smokeAlarmEvent(cmd.event)
-    }  else if (cmd.notificationType == 4) { // Heat Alarm (V2)
+    } else if (cmd.notificationType == 4) { // Heat Alarm (V2)
         log.debug "notificationv3.NotificationReport: for Heat Alarm (V2)"
         result << heatAlarmEvent(cmd.event)
+    } else if (cmd.notificationType == 8) {  
+    	if (cmd.event == 0x0A) {
+            def map = [:]
+            map.name = "battery"
+            map.value = 1
+            map.unit = "%"
+            map.displayed = true
+            result << createEvent(map)
+        }
+    } else if (cmd.notificationType == 9) {
+    	if (cmd.event == 0x01) {
+        	result << createEvent(descriptionText: "Warning: $device.displayName system hardware failure", isStateChange: true)	
+        }
     } else {
         log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
         result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
@@ -221,7 +252,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 def smokeAlarmEvent(value) {
     log.debug "smokeAlarmEvent(value): $value"
     def map = [name: "smoke"]
-    if (value == 1 || value == 2) {
+    if (value == 2) {
         map.value = "detected"
         map.descriptionText = "$device.displayName detected smoke"
     } else if (value == 0) {
@@ -230,9 +261,6 @@ def smokeAlarmEvent(value) {
     } else if (value == 3) {
         map.value = "tested"
         map.descriptionText = "$device.displayName smoke alarm test"
-    } else if (value == 4) {
-        map.value = "replacement required"
-        map.descriptionText = "$device.displayName replacement required"
     } else {
         map.value = "unknown"
         map.descriptionText = "$device.displayName unknown event"
@@ -243,18 +271,12 @@ def smokeAlarmEvent(value) {
 def heatAlarmEvent(value) {
     log.debug "heatAlarmEvent(value): $value"
     def map = [name: "heatAlarm"]
-    if (value == 1 || value == 2) {
-        map.value = "overheat detected"
+    if (value == 2) {
+        map.value = "overheat"
         map.descriptionText = "$device.displayName overheat detected"
     } else if (value == 0) {
-        map.value = "clear"
+        map.value = "inactive"
         map.descriptionText = "$device.displayName heat alarm cleared (no overheat)"
-    } else if (value == 3 || value == 4) {
-        map.value = "rapid temperature rise"
-        map.descriptionText = "$device.displayName rapid temperature rise"
-    } else if (value == 5 || value == 6) {
-        map.value = "underheat detected"
-        map.descriptionText = "$device.displayName underheat detected"
     } else {
         map.value = "unknown"
         map.descriptionText = "$device.displayName unknown event"
@@ -274,12 +296,14 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
         //Only ask for battery if we haven't had a BatteryReport in a while
         if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
             log.debug("Device has been configured sending >> batteryGet()")
-            cmds << zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format()
-            cmds << "delay 1200"
+            cmds << zwave.batteryV1.batteryGet()
         }
+        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 0)
+        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 1)
+        cmds << zwave.sensorAlarmV1.sensorAlarmGet(sensorType: 4)
         log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
-        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-        result << response(cmds) //tell device back to sleep
+        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
+        result << response(commands(cmds,500)) //tell device back to sleep
     }
     result
 }
@@ -317,8 +341,26 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "After device is securely joined, send commands to update tiles"
     result << zwave.batteryV1.batteryGet()
     result << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
-    result << zwave.wakeUpV1.wakeUpNoMoreInformation()
-    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 5000))]
+    //always send wakeUpNoMoreInformation as secure (at this point "secured" property is not set)
+    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 500) << "delay 1000" << secure(zwave.wakeUpV1.wakeUpNoMoreInformation()))]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
@@ -332,6 +374,37 @@ def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd)
     result
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	def map = [:]
+	switch (cmd.sensorType) {
+    	case 0:
+        	map.name = "tamper"
+            map.value = cmd.sensorState == 0xFF ? "active" : "inactive"
+            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName casing was opened" : ""
+        	break
+        case 1:
+        	map.name = "smoke"
+            map.value = cmd.sensorState == 0xFF ? "detected" : "clear"
+            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName detected smoke" : "$device.displayName is clear (no smoke)"
+        	break
+        case 4:
+        	map.name = "heatAlarm"
+        	map.value = cmd.sensorState == 0xFF ? "overheat" : "inactive"
+            map.descriptionText = cmd.sensorState == 0xFF ? "$device.displayName overheat detected" : "$device.displayName heat alarm cleared (no overheat)"
+        	break
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.timeparametersv1.TimeParametersGet cmd) {
+	log.info "Executing zwaveEvent 8B (TimeParametersV1) : 02 (TimeParametersGet) with cmd: $cmd"
+	def nowCal = Calendar.getInstance(TimeZone.getTimeZone("UTC"))
+    //Time Parameters are requested by an un-encapsulated frame
+	response(zwave.timeParametersV1.timeParametersReport(year: nowCal.get(Calendar.YEAR), month: (nowCal.get(Calendar.MONTH) + 1), day: nowCal.get(Calendar.DAY_OF_MONTH), 
+    	hourUtc: nowCal.get(Calendar.HOUR_OF_DAY), minuteUtc: nowCal.get(Calendar.MINUTE), secondUtc: nowCal.get(Calendar.SECOND)).format())
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
     log.warn "General zwaveEvent cmd: ${cmd}"
     createEvent(descriptionText: cmd.toString(), isStateChange: false)
@@ -360,7 +433,7 @@ def configure() {
         }
         //3. Z-Wave notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable
         if (zwaveNotificationStatus && zwaveNotificationStatus != "null"){
-            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: notificationOptionValueMap[zwaveNotificationStatus] ?: 0)
+            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: zwaveNotificationOptionValueMap[zwaveNotificationStatus] ?: 0)
         }
         //4. Visual indicator notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
         if (visualIndicatorNotificationStatus && visualIndicatorNotificationStatus != "null") {
@@ -402,7 +475,16 @@ def configure() {
         //12. get temperature reading from device
         request += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
 
-        commands(request) + ["delay 10000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		//13. set association group
+		request += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+
+		//14. get version
+        request += zwave.versionV1.versionGet()
+
+		//15. get serial number
+        request += zwave.manufacturerSpecificV2.deviceSpecificGet()
+        
+        commands(request) + ["delay 1000", command(zwave.wakeUpV1.wakeUpNoMoreInformation())]
     }
 }
 
@@ -418,24 +500,42 @@ private def getTimeOptionValueMap() { [
         "reports inactive" : 0,
 ]}
 
+private def getZwaveNotificationOptionValueMap() { [
+	"disabled" : 0,
+    "casing opened" : 1,
+    "exceeding temperature threshold" : 2,
+    "all notifications" : 3	
+]}
+
 private def getNotificationOptionValueMap() { [
-        "disabled" : 0,
-        "casing opened" : 1,
-        "exceeding temperature threshold" : 2,
-        "lack of Z-Wave range" : 4,
-        "all notifications" : 7,
+    "disabled" : 0,
+    "casing opened" : 1,
+    "exceeding temperature threshold" : 2,
+    "lack of Z-Wave range" : 4,
+    "all notifications" : 7
 ]}
 
 private command(physicalgraph.zwave.Command cmd) {
-    if (isSecured()) {
+    def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    if (isSecured() && secureClasses.find{ it == cmd.commandClassId }) {
         log.info "Sending secured command: ${cmd}"
-        zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+        secure(cmd)
     } else {
         log.info "Sending unsecured command: ${cmd}"
-        cmd.format()
+        crc16(cmd)
     }
 }
 
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
 private commands(commands, delay=200) {
     log.info "inside commands: ${commands}"
     delayBetween(commands.collect{ command(it) }, delay)
@@ -452,4 +552,4 @@ private setSecured() {
 }
 private isSecured() {
     getDataValue("secured") == "true"
-}
+}

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartPower Outlet i18n Translation File
@@ -23,6 +23,7 @@
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Outlet'''.ko=플러그
 # Events descriptionText
 '''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
 '''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartPower Outlet DTH File
@@ -22,7 +22,6 @@
  *  1. 20160117 TW - Update/Edit to support i18n translations
 ===============================================================================
  */
-
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -104,8 +103,8 @@ def parse(String description) {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
-			def value = (finalResult.value as Integer)/10
-			createEvent(name: "power", value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
@@ -113,10 +112,8 @@ def parse(String description) {
 			*/
 		}
 		else {
-        	if ( finalResult.value == "on" )
-				createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is On', translatable: true)
-            else
-            	createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is Off', translatable: true)
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
@@ -177,4 +174,4 @@ def getPowerDescription(descMap) {
 	else {
 		return [:]
 	}
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Moisture Sensor i18n Translation File
@@ -30,11 +30,12 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Water Leak Sensor'''.ko=누수센서
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Moisture Sensor DTH File
@@ -31,17 +31,18 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-        
-        command "enrollResponse"
+
+		command "enrollResponse"
+
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
@@ -57,7 +58,7 @@ metadata {
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -66,7 +67,7 @@ metadata {
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
+			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -88,7 +89,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -102,29 +103,29 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
             case 0x0402:
                 // temp is last 2 data values. reverse to swap endian
@@ -139,22 +140,22 @@ private Map parseCatchAllMessage(String description) {
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -163,10 +164,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -177,42 +178,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMoistureResult('dry')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMoistureResult('wet')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0022': // Tamper Alarm
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			break
 
-        case '0x0024': // Supervision Report
-        	 log.debug 'dry with tamper alarm'
-        	resultMap = getMoistureResult('dry')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-        	log.debug 'water with tamper alarm'
-        	resultMap = getMoistureResult('wet')
-            break
+		case '0x0024': // Supervision Report
+			 log.debug 'dry with tamper alarm'
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0026': // Trouble/Failure
-            break
+		case '0x0025': // Restore Report
+			log.debug 'water with tamper alarm'
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -242,7 +243,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -256,8 +257,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -265,13 +265,14 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
 
 	return result
 }
+
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
 	if (tempOffset) {
@@ -281,9 +282,9 @@ private Map getTemperatureResult(value) {
 	}
     def descriptionText
     if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
     else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
 
 	return [
 		name: 'temperature',
@@ -294,7 +295,7 @@ private Map getTemperatureResult(value) {
 }
 
 private Map getMoistureResult(value) {
-	log.debug "water" 
+	log.debug "water"
     def descriptionText
     if ( value == "wet" )
     	descriptionText = '{{ device.displayName }} is wet'
@@ -311,7 +312,7 @@ private Map getMoistureResult(value) {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -321,32 +322,32 @@ def refresh() {
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [	
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-    [
+	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-    ]
+	]
 }
 
 private getEndpointId() {
@@ -358,19 +359,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Motion Sensor i18n Translation File
@@ -29,11 +29,12 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Motion Sensor'''.ko=모션 센서
 # Events descriptionText
 '''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
 '''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Motion Sensor DTH File
@@ -29,17 +29,18 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-        capability "Temperature Measurement"
+		capability "Temperature Measurement"
 		capability "Refresh"
-        
-        command "enrollResponse"
+
+		command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -95,7 +96,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -106,55 +107,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
 
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 
 			case 0x0406:
-            	log.debug 'motion'
-                resultMap.name = 'motion'
-                break
-        }
-    }
+				log.debug 'motion'
+				resultMap.name = 'motion'
+				break
+		}
+	}
 
-    return resultMap
+	return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -163,7 +164,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -172,14 +173,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-    	resultMap = getMotionResult(value)
-    } 
- 
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -190,44 +191,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			log.debug 'motion with tamper alarm'
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-            break
+		case '0x0024': // Supervision Report
+			log.debug 'no motion with tamper alarm'
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0025': // Restore Report
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			log.debug 'motion with failure alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -257,7 +258,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -272,7 +273,7 @@ private Map getBatteryResult(rawValue) {
 				if (pct != null) {
 					result.value = pct
                     def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -280,7 +281,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
@@ -312,7 +313,6 @@ private Map getTemperatureResult(value) {
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
-    //String descriptionText = '{{ device.displayName }} is {{ value | translate }}'
 	return [
 		name: 'motion',
 		value: value,
@@ -322,7 +322,7 @@ private Map getMotionResult(value) {
 }
 
 def refresh() {
-	log.debug "refresh executed"
+	log.debug "refresh called"
 	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
@@ -372,19 +372,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Multi Sensor i18n Translation File
@@ -32,6 +32,7 @@
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Multipurpose Sensor'''.ko=멀티 센서
 # Events descriptionText
 '''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
 '''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
@@ -39,8 +40,6 @@
 '''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
-'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Multi Sensor DTH File
@@ -24,27 +24,28 @@
 ===============================================================================
  */
 
- metadata {
- 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-        capability "Three Axis"
+metadata {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+
+		capability "Three Axis"
 		capability "Battery"
- 		capability "Configuration"
-        capability "Sensor"
+		capability "Configuration"
+		capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-        
+
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
- 	}
+	}
 
- 	simulator {
+	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -61,7 +62,7 @@
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
- 	preferences {
+	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -75,9 +76,9 @@
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
- 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", translatable: true, description: "Tap to set", options: ["Yes","No"], defaultValue: "No", required: false, displayDuringSetup: false)
+			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
- 	}
+	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -109,19 +110,16 @@
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
- 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
- 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
- 		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
  }
 
@@ -130,61 +128,61 @@ def parse(String description) {
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
 	}
-    else if (description?.startsWith('temperature: ')) {
+	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
 	else if (description?.startsWith('zone status')) {
 		map = parseIasMessage(description)
 	}
 
- 	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-    else if (description?.startsWith('read attr -')) {
-        result = parseReportAttributeMessage(description).each { createEvent(it) }
-    }
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
 	return result
 }
 
- private Map parseCatchAllMessage(String description) {
- 	Map resultMap = [:]
- 	def cluster = zigbee.parse(description)
-    log.debug cluster
- 	if (shouldProcessMessage(cluster)) {
- 		switch(cluster.clusterId) {
- 			case 0x0001:
- 			resultMap = getBatteryResult(cluster.data.last())
- 			break
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+			resultMap = getBatteryResult(cluster.data.last())
+			break
 
- 			case 0xFC02:
-            log.debug 'ACCELERATION'
- 			break
+			case 0xFC02:
+			log.debug 'ACCELERATION'
+			break
 
- 			case 0x0402:
- 			log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-            }
-        }
+			case 0x0402:
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+		}
+	}
 
-        return resultMap
-    }
+	return resultMap
+}
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-    cluster.command == 0x0B ||
-    cluster.command == 0x07 ||
-    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private List parseReportAttributeMessage(String description) {
@@ -211,10 +209,12 @@ private List parseReportAttributeMessage(String description) {
 			result << parseAxis(threeAxisAttributes)
 			descMap.value = descMap.value[-2..-1]
 		}
-        result << getAccelerationResult(descMap.value)
+		result << getAccelerationResult(descMap.value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-        result << parseAxis(descMap.value)
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -238,43 +238,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
+		case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0021': // Open/Motion/Wet
+		case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0022': // Tamper Alarm
-        break
+		case '0x0022': // Tamper Alarm
+		break
 
-        case '0x0023': // Battery Alarm
-        break
+		case '0x0023': // Battery Alarm
+		break
 
-        case '0x0024': // Supervision Report
+		case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0025': // Restore Report
+		case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0026': // Trouble/Failure
-        break
+		case '0x0026': // Trouble/Failure
+		break
 
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+		case '0x0028': // Test Mode
+		break
+	}
+	return resultMap
 }
 
 def updated() {
@@ -311,7 +311,6 @@ def getTemperature(value) {
 
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
 
 	def result = [
 		name: 'battery',
@@ -327,7 +326,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -341,8 +340,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -350,7 +348,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
@@ -359,56 +357,36 @@ private Map getBatteryResult(rawValue) {
 }
 
 private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-    def name = "temperature"
+	log.debug "Temperature"
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-    
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-		name: name,
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+	name: 'temperature',
+	value: value,
+	descriptionText: descriptionText,
+    translatable: true
 	]
 }
 
 private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
-    def name = "contact"
-    
-    def descriptionText    
-    if ( value == 'open' )    
-		descriptionText = '{{ device.displayName }} was opened'
-    else
-    	descriptionText = '{{ device.displayName }} was closed'
-        
-    sendEvent(name: 'status', value: value, descriptionText: descriptionText, displayed: false)
-    def isStateChange = isStateChange(device, name, value)
-	return [
-		name: name,
-		value: value,
-		descriptionText: descriptionText,
-        isStateChange: isStateChange,
-        translatable: true
-	]
-	
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {
-	log.debug "Acceleration is $value"
+	log.debug "Acceleration"
 	def name = "acceleration"
     def value
     def descriptionText
-    
+
 	if ( numValue.endsWith("1") ) {
     	value = "active"
         descriptionText = '{{ device.displayName }} was active'
@@ -473,37 +451,38 @@ def refresh() {
 
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Device Reporting"
-		
+	log.debug "Configuring Reporting"
+
 	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
+		]
+
 	return configCmds + refresh()
 }
 
@@ -519,17 +498,12 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -556,6 +530,11 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -569,15 +548,9 @@ def garageEvent(zValue) {
 		garageValue = 'garage-open'
 	}
 	if (contactValue != null){
-		def linkText = getLinkText(device)
-        if ( contactValue == 'open' ) {
-        	descriptionText: '{{ device.displayName }} was opened'
-            sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was opened', displayed:false, translatable: true)
-            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was opened', translatable: true)
-        } else {
-			sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was closed', displayed:false, translatable: true)
-            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was closed', translatable: true)
-        }
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
 	}
 }
 
@@ -632,4 +605,4 @@ private byte[] reverseArray(byte[] array) {
 		i++;
 	}
 	return array
-}
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -67,11 +67,11 @@ mappings {
 def listAllDevices() {
    	def resp = []
    	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub?.name]
     }
     
     locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub?.name]
     }
     return resp
 }

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -76,7 +76,7 @@ def mainPage() {
 		}
 		section{
 			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				//"Custom Message",
+				"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,7 +89,7 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			//input "message","text",title:"Play this message", required:false, multiple: false
+			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
 			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
@@ -408,13 +408,15 @@ private loadText() {
 		case "Lightsaber":
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
-		default:
-			/*if (message) {
+		case "Custom Message":
+			if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}*/
+			}
+			break;
+		default:
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}