MSA-971: Added Device Handler for Fibaro Wall Plug ZW5

Rolling down changes in staging to master

devicetypes/fibargroup/fibaro-wall-plug-zw5.src/fibaro-wall-plug-zw5.groovy

@@ -0,0 +1,254 @@
+/**
+ *  Fibaro Wall Plug ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Wall Plug ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Actuator"
+		capability "Configuration"
+		capability "Energy Meter"
+		capability "Power Meter"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Switch"
+
+		command "reset"
+        
+        fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x32, 0x8E, 0x71, 0x73, 0x98, 0x31, 0x25, 0x86", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+
+	tiles(scale: 2) {
+    	multiAttributeTile(name:"FGWP", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.switch", key:"PRIMARY_CONTROL") {
+            	attributeState("on", label: '${name}', action: "switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821")
+            	attributeState("off", label: '${name}', action: "switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff")   
+            }
+            
+            tileAttribute("device.power", key:"SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue} W', backgroundColor:"#ffffff")
+			}
+        }
+        
+		valueTile("energy", "device.energy", width: 2, height: 2) {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+                
+        main "FGWP"
+        details(["FGWP", "energy", "reset", "refresh"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x25: 1, 0x31: 5, 0x32: 1, 0x5A: 1, 0x71: 3, 0x72: 2, 0x86: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x25: 1, 0x5A: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x32: 1, 0x71: 3, 0x72: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+	} else if (cmd.scale == 2) {
+		createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    if (cmd.sensorType == 4) {
+    	createEvent(name: "power", value: Math.round(cmd.scaledSensorValue), unit: "W")
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	if (cmd.notificationType == 0x08) {
+    	if (cmd.event == 0x06) {
+        	createEvent(descriptionText: "Warning: $device.displayName detected over-current", isStateChange: true)	
+        } else if (cmd.event == 0x08) {
+        	createEvent(descriptionText: "Warning: $device.displayName detected over-load", isStateChange: true)
+        }
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "$device.displayName: Unhandled: $cmd"
+	[:]
+}
+
+// handle commands
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+
+    cmds += zwave.manufacturerSpecificV1.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.meterV2.meterGet(scale:0)
+    cmds += zwave.meterV2.meterGet(scale:2)
+    cmds += zwave.switchBinaryV1.switchBinaryGet()
+    
+    encapSequence(cmds, 500)
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	
+    def cmds = []
+    cmds += zwave.meterV2.meterGet(scale:0)
+    cmds += zwave.meterV2.meterGet(scale:2)
+    cmds += zwave.switchBinaryV1.switchBinaryGet()
+    
+    encapSequence(cmds, 500)
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF))
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	encap(zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00))
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+    encap(zwave.meterV2.meterReset())
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x25, 0x5A, 0x70, 0x85, 0x8E]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartPower Outlet i18n Translation File
@@ -23,6 +23,7 @@
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Outlet'''.ko=플러그
 # Events descriptionText
 '''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
 '''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartPower Outlet DTH File
@@ -22,7 +22,6 @@
  *  1. 20160117 TW - Update/Edit to support i18n translations
 ===============================================================================
  */
-
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -104,8 +103,8 @@ def parse(String description) {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
-			def value = (finalResult.value as Integer)/10
-			createEvent(name: "power", value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
@@ -113,10 +112,8 @@ def parse(String description) {
 			*/
 		}
 		else {
-        	if ( finalResult.value == "on" )
-				createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is On', translatable: true)
-            else
-            	createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is Off', translatable: true)
+			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
@@ -177,4 +174,4 @@ def getPowerDescription(descMap) {
 	else {
 		return [:]
 	}
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Moisture Sensor i18n Translation File
@@ -30,11 +30,12 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Water Leak Sensor'''.ko=누수센서
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Moisture Sensor DTH File
@@ -31,17 +31,18 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-        
-        command "enrollResponse"
+
+		command "enrollResponse"
+
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
@@ -57,7 +58,7 @@ metadata {
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -66,7 +67,7 @@ metadata {
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
+			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -88,7 +89,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -102,29 +103,29 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
             case 0x0402:
                 // temp is last 2 data values. reverse to swap endian
@@ -139,22 +140,22 @@ private Map parseCatchAllMessage(String description) {
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -163,10 +164,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -177,42 +178,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMoistureResult('dry')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMoistureResult('wet')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0022': // Tamper Alarm
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			break
 
-        case '0x0024': // Supervision Report
-        	 log.debug 'dry with tamper alarm'
-        	resultMap = getMoistureResult('dry')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-        	log.debug 'water with tamper alarm'
-        	resultMap = getMoistureResult('wet')
-            break
+		case '0x0024': // Supervision Report
+			 log.debug 'dry with tamper alarm'
+			resultMap = getMoistureResult('dry')
+			break
 
-        case '0x0026': // Trouble/Failure
-            break
+		case '0x0025': // Restore Report
+			log.debug 'water with tamper alarm'
+			resultMap = getMoistureResult('wet')
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -242,7 +243,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -256,8 +257,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -265,13 +265,14 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
 
 	return result
 }
+
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
 	if (tempOffset) {
@@ -281,9 +282,9 @@ private Map getTemperatureResult(value) {
 	}
     def descriptionText
     if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
     else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
 
 	return [
 		name: 'temperature',
@@ -294,7 +295,7 @@ private Map getTemperatureResult(value) {
 }
 
 private Map getMoistureResult(value) {
-	log.debug "water" 
+	log.debug "water"
     def descriptionText
     if ( value == "wet" )
     	descriptionText = '{{ device.displayName }} is wet'
@@ -311,7 +312,7 @@ private Map getMoistureResult(value) {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -321,32 +322,32 @@ def refresh() {
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [	
+	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-    [
+	[
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-    ]
+	]
 }
 
 private getEndpointId() {
@@ -358,19 +359,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Motion Sensor i18n Translation File
@@ -29,11 +29,12 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Motion Sensor'''.ko=모션 센서
 # Events descriptionText
 '''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
 '''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Motion Sensor DTH File
@@ -29,17 +29,18 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-        capability "Temperature Measurement"
+		capability "Temperature Measurement"
 		capability "Refresh"
-        
-        command "enrollResponse"
+
+		command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -95,7 +96,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -106,55 +107,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-    else if (description?.startsWith('zone status')) {
-	    map = parseIasMessage(description)
-    }
- 
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
-    if (description?.startsWith('enroll request')) {
-    	List cmds = enrollResponse()
-        log.debug "enroll response: ${cmds}"
-        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-    }
-    return result
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
 }
 
 private Map parseCatchAllMessage(String description) {
-    Map resultMap = [:]
-    def cluster = zigbee.parse(description)
-    if (shouldProcessMessage(cluster)) {
-        switch(cluster.clusterId) {
-            case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
-                break
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
 
-            case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 
 			case 0x0406:
-            	log.debug 'motion'
-                resultMap.name = 'motion'
-                break
-        }
-    }
+				log.debug 'motion'
+				resultMap.name = 'motion'
+				break
+		}
+	}
 
-    return resultMap
+	return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-        cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
-        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -163,7 +164,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -172,14 +173,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-    	resultMap = getMotionResult(value)
-    } 
- 
+	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+		resultMap = getMotionResult(value)
+	}
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -190,44 +191,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0023': // Battery Alarm
-            break
+		case '0x0022': // Tamper Alarm
+			log.debug 'motion with tamper alarm'
+			resultMap = getMotionResult('active')
+			break
 
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
+		case '0x0023': // Battery Alarm
+			break
 
-        case '0x0025': // Restore Report
-            break
+		case '0x0024': // Supervision Report
+			log.debug 'no motion with tamper alarm'
+			resultMap = getMotionResult('inactive')
+			break
 
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
+		case '0x0025': // Restore Report
+			break
 
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+		case '0x0026': // Trouble/Failure
+			log.debug 'motion with failure alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {
@@ -257,7 +258,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -272,7 +273,7 @@ private Map getBatteryResult(rawValue) {
 				if (pct != null) {
 					result.value = pct
                     def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -280,7 +281,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
@@ -312,7 +313,6 @@ private Map getTemperatureResult(value) {
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
-    //String descriptionText = '{{ device.displayName }} is {{ value | translate }}'
 	return [
 		name: 'motion',
 		value: value,
@@ -322,7 +322,7 @@ private Map getMotionResult(value) {
 }
 
 def refresh() {
-	log.debug "refresh executed"
+	log.debug "refresh called"
 	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
@@ -372,19 +372,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
+	reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: SmartSense Multi Sensor i18n Translation File
@@ -32,6 +32,7 @@
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
 '''Give your device a name'''.ko=기기 이름 바꾸기
+'''Multipurpose Sensor'''.ko=멀티 센서
 # Events descriptionText
 '''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
 '''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
@@ -39,8 +40,6 @@
 '''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
-'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -3,15 +3,15 @@
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
- *  use this file except in compliance with the License. You may obtain a copy 
+ *  use this file except in compliance with the License. You may obtain a copy
  *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software 
- *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
- *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
- *  License for the specific language governing permissions and limitations 
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing permissions and limitations
  *  under the License.
 ===============================================================================
  *  Purpose: SmartSense Multi Sensor DTH File
@@ -24,27 +24,28 @@
 ===============================================================================
  */
 
- metadata {
- 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-        capability "Three Axis"
+metadata {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+
+		capability "Three Axis"
 		capability "Battery"
- 		capability "Configuration"
-        capability "Sensor"
+		capability "Configuration"
+		capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-        
+
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
- 	}
+	}
 
- 	simulator {
+	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -61,7 +62,7 @@
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
- 	preferences {
+	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -75,9 +76,9 @@
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
- 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", translatable: true, description: "Tap to set", options: ["Yes","No"], defaultValue: "No", required: false, displayDuringSetup: false)
+			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
- 	}
+	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -109,19 +110,16 @@
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
- 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
- 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
- 		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "battery", "refresh"])
 	}
  }
 
@@ -130,61 +128,61 @@ def parse(String description) {
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
 	}
-    else if (description?.startsWith('temperature: ')) {
+	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
 	else if (description?.startsWith('zone status')) {
 		map = parseIasMessage(description)
 	}
 
- 	def result = map ? createEvent(map) : null
+	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-    else if (description?.startsWith('read attr -')) {
-        result = parseReportAttributeMessage(description).each { createEvent(it) }
-    }
+	else if (description?.startsWith('read attr -')) {
+		result = parseReportAttributeMessage(description).each { createEvent(it) }
+	}
 	return result
 }
 
- private Map parseCatchAllMessage(String description) {
- 	Map resultMap = [:]
- 	def cluster = zigbee.parse(description)
-    log.debug cluster
- 	if (shouldProcessMessage(cluster)) {
- 		switch(cluster.clusterId) {
- 			case 0x0001:
- 			resultMap = getBatteryResult(cluster.data.last())
- 			break
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	log.debug cluster
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+			resultMap = getBatteryResult(cluster.data.last())
+			break
 
- 			case 0xFC02:
-            log.debug 'ACCELERATION'
- 			break
+			case 0xFC02:
+			log.debug 'ACCELERATION'
+			break
 
- 			case 0x0402:
- 			log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
-            }
-        }
+			case 0x0402:
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+		}
+	}
 
-        return resultMap
-    }
+	return resultMap
+}
 
 private boolean shouldProcessMessage(cluster) {
-    // 0x0B is default response indicating message got through
-    // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-    cluster.command == 0x0B ||
-    cluster.command == 0x07 ||
-    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-    return !ignoredMessage
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
+	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
 }
 
 private List parseReportAttributeMessage(String description) {
@@ -211,10 +209,12 @@ private List parseReportAttributeMessage(String description) {
 			result << parseAxis(threeAxisAttributes)
 			descMap.value = descMap.value[-2..-1]
 		}
-        result << getAccelerationResult(descMap.value)
+		result << getAccelerationResult(descMap.value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-        result << parseAxis(descMap.value)
+		// The size is checked to ensure the attribute report contains X, Y and Z values
+		// If all three axis are not included then the attribute report is ignored
+		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -238,43 +238,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
+		case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0021': // Open/Motion/Wet
+		case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0022': // Tamper Alarm
-        break
+		case '0x0022': // Tamper Alarm
+		break
 
-        case '0x0023': // Battery Alarm
-        break
+		case '0x0023': // Battery Alarm
+		break
 
-        case '0x0024': // Supervision Report
+		case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-        break
+		break
 
-        case '0x0025': // Restore Report
+		case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-        break
+		break
 
-        case '0x0026': // Trouble/Failure
-        break
+		case '0x0026': // Trouble/Failure
+		break
 
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+		case '0x0028': // Test Mode
+		break
+	}
+	return resultMap
 }
 
 def updated() {
@@ -311,7 +311,6 @@ def getTemperature(value) {
 
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
 
 	def result = [
 		name: 'battery',
@@ -327,7 +326,7 @@ private Map getBatteryResult(rawValue) {
 			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {         
+			if (device.getDataValue("manufacturer") == "SmartThings") {
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -341,8 +340,7 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-                    def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 				}
 			}
 			else {
@@ -350,7 +348,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
 	}
@@ -359,56 +357,36 @@ private Map getBatteryResult(rawValue) {
 }
 
 private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-    def name = "temperature"
+	log.debug "Temperature"
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-    
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
-    else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+			'{{ device.displayName }} was {{ value }}°F'
 
 	return [
-		name: name,
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
+	name: 'temperature',
+	value: value,
+	descriptionText: descriptionText,
+    translatable: true
 	]
 }
 
 private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
-    def name = "contact"
-    
-    def descriptionText    
-    if ( value == 'open' )    
-		descriptionText = '{{ device.displayName }} was opened'
-    else
-    	descriptionText = '{{ device.displayName }} was closed'
-        
-    sendEvent(name: 'status', value: value, descriptionText: descriptionText, displayed: false)
-    def isStateChange = isStateChange(device, name, value)
-	return [
-		name: name,
-		value: value,
-		descriptionText: descriptionText,
-        isStateChange: isStateChange,
-        translatable: true
-	]
-	
+	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {
-	log.debug "Acceleration is $value"
+	log.debug "Acceleration"
 	def name = "acceleration"
     def value
     def descriptionText
-    
+
 	if ( numValue.endsWith("1") ) {
     	value = "active"
         descriptionText = '{{ device.displayName }} was active'
@@ -473,37 +451,38 @@ def refresh() {
 
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Device Reporting"
-		
+	log.debug "Configuring Reporting"
+
 	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
+		]
+
 	return configCmds + refresh()
 }
 
@@ -519,17 +498,12 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
+		"raw 0x500 {01 23 00 00 00}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -556,6 +530,11 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -569,15 +548,9 @@ def garageEvent(zValue) {
 		garageValue = 'garage-open'
 	}
 	if (contactValue != null){
-		def linkText = getLinkText(device)
-        if ( contactValue == 'open' ) {
-        	descriptionText: '{{ device.displayName }} was opened'
-            sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was opened', displayed:false, translatable: true)
-            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was opened', translatable: true)
-        } else {
-			sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was closed', displayed:false, translatable: true)
-            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was closed', translatable: true)
-        }
+		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
 	}
 }
 
@@ -632,4 +605,4 @@ private byte[] reverseArray(byte[] array) {
 		i++;
 	}
 	return array
-}
+}

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -67,11 +67,11 @@ mappings {
 def listAllDevices() {
    	def resp = []
    	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub?.name]
     }
     
     locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub?.name]
     }
     return resp
 }

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -76,7 +76,7 @@ def mainPage() {
 		}
 		section{
 			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				//"Custom Message",
+				"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,7 +89,7 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			//input "message","text",title:"Play this message", required:false, multiple: false
+			input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
 			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
@@ -408,13 +408,15 @@ private loadText() {
 		case "Lightsaber":
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
-		default:
-			/*if (message) {
+		case "Custom Message":
+			if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}*/
+			}
+			break;
+		default:
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}