MSA-1227: Enable your SmartThings the voice notifications & knows whose coming & leaving.

[CHF-112] Add Health Check capability to SmartThings SmartSense products

build.gradle

@@ -1,13 +1,15 @@
 import java.nio.charset.StandardCharsets
 import java.nio.file.Paths
+import com.smartthings.deployment.slack.FileUpload
+import com.smartthings.deployment.slack.Message
 
 apply plugin: 'groovy'
 apply plugin: 'smartthings-executable-deployment'
-apply plugin: 'smartthings-hipchat'
+apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.6"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.7"
     }
     repositories {
         mavenLocal()
@@ -30,7 +32,43 @@ repositories {
 dependencies {
 }
 
-hipchatShareFile {
+slackSendMessage {
+    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
+    String token = project.hasProperty('slackToken') ? project.property('slackToken') : null
+    String webhookUrl = project.hasProperty('slackWebhookUrl') ? project.property('slackWebhookUrl') : null
+    String channel = project.hasProperty('slackChannel') ? project.property('slackChannel') : null
+    String drinks = 'https://dl.dropboxusercontent.com/s/m1z5mpd3c83lwev/minion_beer.jpeg?dl=0'
+    String wolverine = 'https://dl.dropboxusercontent.com/s/4lbjqzvm2v033u9/minion_wolverine.jpg?dl=0'
+    String beach = 'https://dl.dropboxusercontent.com/s/rqrfgxk53gfng69/minion_beach.png?dl=0'
+    String iconUrl
+    String color
+    String messageText
+    String username
+    switch (branch) {
+        case 'master':
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
+            break
+        case 'staging':
+            username = 'Dickory'
+            iconUrl = beach
+            color = '#FFDE20'
+            messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
+            break
+        case 'production':
+            username = 'Dock'
+            iconUrl = drinks
+            color = '#FF1D23'
+            messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'
+            break
+        default:
+            username = 'Hickory'
+            iconUrl = wolverine
+            color = '#35D0F2'
+            messageText = "Began deployment of an _SmartThingsPublic[${branch}]_ branch.  Have no idea what's going on."
+    }
     List<String> archives = []
     File rootDir = new File("${project.buildDir}/archives")
     if (rootDir.exists()) {
@@ -43,19 +81,25 @@ hipchatShareFile {
             }
         }
     }
+    Date date = new Date()
+    String fileDate = date.format('yyyy-MM-dd_HH-mm-ss', TimeZone.getTimeZone('GMT'))
 
-    // Set task properties
-    data = archives.join('\n').getBytes(StandardCharsets.UTF_8)
-    fileName = 'deployment-notes.txt'
-    contentType = 'text/html'
-}
-
-hipchatSendNotification {
-    String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
-    message = "Began executable deploy of SmartThingsPublic(${branch})."
-    if (branch == 'master') {
-      message += ' (dev shards)'
-    }
-    color = branch == 'master' ? 'yellow' : 'red'
-    notify = true
+    // Required Task Arguments.
+    file = new FileUpload(
+        data: archives.join('\n').getBytes(StandardCharsets.UTF_8),
+        filename: "deployment-notes-${fileDate}.txt",
+        title: 'Deployment Notes',
+        channels: channel,
+        token: token,
+        color: color
+    )
+    message = new Message(
+        webhookUrl: webhookUrl,
+        username: username,
+        asUser: true,
+        iconUrl: iconUrl,
+        channel: channel,
+        fallback: 'Deployment Notification',
+        text: messageText
+    )
 }

circle.yml

@@ -15,13 +15,11 @@ deployment:
   develop:
     branch: master
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3Buckets="$S3_BUCKETS_DEV"
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_DEV"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace
 
   stage:
     branch: staging
     commands:
-      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Ps3Buckets="$S3_BUCKETS_STAGE"
-      - ./gradlew hipchatSendNotification -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD -Pbranch=$CIRCLE_BRANCH
-      - ./gradlew hipchatShareFile -PsmartThingsArtifactoryUserName=$ARTIFACTORY_USERNAME -PsmartThingsArtifactoryPassword=$ARTIFACTORY_PASSWORD
+      - ./gradlew deployArchives -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Ps3Buckets="$S3_BUCKETS_STAGE"
+      - ./gradlew slackSendMessage -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD" -Pbranch="$CIRCLE_BRANCH" -PslackToken="$SLACK_TOKEN" -PslackWebhookUrl="$SLACK_WEBHOOK_URL" -PslackChannel="$SLACK_CHANNEL" --stacktrace

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -0,0 +1,272 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+        
+        capability "Temperature Measurement"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86, 0x84", outClusters: ""//actual NIF
+	}
+
+	simulator {
+		
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        main "FGK"
+        details(["FGK","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+        
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -0,0 +1,239 @@
+/**
+ *  Fibaro Door/Window Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Contact Sensor"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Tamper Alert"
+
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		
+	}
+        
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+                
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGK"
+        details(["FGK","battery"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"   
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	//it is assumed that default notification events are used
+    //(parameter 20 was not changed before device's re-inclusion)
+    def map = [:]
+    if (cmd.notificationType == 6) {
+    	switch (cmd.event) {                
+        	case 22:
+            	map.name = "contact"
+                map.value = "open"
+                map.descriptionText = "${device.displayName}: is open"
+            	break
+                
+            case 23:
+            	map.name = "contact"
+                map.value = "closed"
+                map.descriptionText = "${device.displayName}: is closed"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
+    def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+    def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+    
+    //todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -0,0 +1,269 @@
+/**
+ *  Fibaro Flood Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Water Sensor"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+	}
+
+	simulator {
+    
+	}
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}       
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+       	        
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        	state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGFS"
+        details(["FGFS","battery", "temperature"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGFS failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+
+        if (cmd) {
+            log.debug "Parsed '${cmd}'"
+            zwaveEvent(cmd)
+        }
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 5) {
+    	switch (cmd.event) {                
+        	case 2:
+            	map.name = "water"
+                map.value = "wet"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+				break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [:]
+	if (cmd.sensorType == 1) {
+        // temperature
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.unit = getTemperatureScale()
+        map.name = "temperature"
+        map.displayed = true
+	}
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+
+	encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -0,0 +1,281 @@
+/**
+ *  Fibaro Motion Sensor ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Illuminance Measurement"
+		capability "Motion Sensor"
+		capability "Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+        
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+	}
+    
+	simulator {
+		
+    }
+    
+    tiles(scale: 2) {
+    	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+        	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
+            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            }
+            
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+			}  
+        }
+        
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+        
+        valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+		}
+        
+        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+        
+        main "FGMS"
+        details(["FGMS","battery","temperature","illuminance"])
+    }
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"        
+    def result = []
+    
+    if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGK failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x71: 3, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x31: 5, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def map = [ displayed: true ]
+    switch (cmd.sensorType) {
+    	case 1:
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
+            break
+    	case 3:
+        	map.name = "illuminance"
+            map.value = cmd.scaledSensorValue.toInteger().toString()
+            map.unit = "lux"
+            break
+    }
+
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+    if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	if (cmd.eventParameter[0] == 3) {
+            		map.name = "tamper"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
+            	}
+            	if (cmd.eventParameter[0] == 8) {
+                	map.name = "motion"
+                    map.value = "inactive"
+                    map.descriptionText = "${device.displayName}: motion has stopped"
+                }
+        		break
+                
+        	case 3:
+            	map.name = "tamper"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
+            	break
+                
+            case 8:
+                map.name = "motion"
+                map.value = "active"
+                map.descriptionText = "${device.displayName}: motion detected"
+                break
+        }
+    }
+    
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << "delay 500"
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+    
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+    
+    def cmds = []
+    
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x20, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -0,0 +1,795 @@
+/**
+ *  CoopBoss H3Vx
+ *	02/29/16	Fixed app crash with Android by changing the syntax of default state in tile definition. 
+ *				Fixed null value errors during join process.  Added 3 new commands to refresh data.
+ *
+ *	01/18/16	Masked invalid temperature reporting when TempProbe1 is below 0C
+ *				Added setBaseCurrentNE, readBaseCurrentNE, commands as well as baseCurrentNE attribute.  
+ *
+ *  Copyright 2016 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *  Icon location = http://scripts.3dgo.net/smartthings/icons/
+ */
+metadata {
+	definition (name: "CoopBoss H3Vx", namespace: "JohnRucker", author: "John.Rucker@Solar-Current.com") {
+        capability "Refresh"
+        capability "Polling"
+        capability "Sensor"
+        capability "Actuator"
+        capability "Configuration"
+		capability "Temperature Measurement"   
+        capability "Door Control"
+  		capability "Switch"
+        
+        command "closeDoor"
+        command "closeDoorHiI"
+        command "openDoor"
+        command "autoCloseOn"
+        command "autoCloseOff"
+        command "autoOpenOn"
+        command "autoOpenOff"
+        command "setCloseLevelTo"
+        command "setOpenLevelTo" 
+        command "setSensitivityLevel"
+        command "Aux1On"
+        command "Aux1Off"        
+        command "Aux2On"
+        command "Aux2Off" 
+        command "updateTemp1"
+        command "updateTemp2"
+        command "updateSun"
+        command "setNewBaseCurrent"
+        command "setNewPhotoCalibration"
+        command "readNewPhotoCalibration"
+        command "readBaseCurrentNE"
+        command "setBaseCurrentNE"
+        command "updateSensitivity"
+        command "updateCloseLightLevel"
+        command "updateOpenLightLevel"
+
+        attribute "doorState","string"
+        attribute "currentLightLevel","number"
+        attribute "closeLightLevel","number"
+        attribute "openLightLevel","number"
+        attribute "autoCloseEnable","string" 
+        attribute "autoOpenEnable","string"
+        attribute "TempProb1","number"
+        attribute "TempProb2","number"   
+        attribute "dayOrNight","string"
+        attribute "doorSensitivity","number"
+        attribute "doorCurrent","number"  
+        attribute "doorVoltage","number"
+        attribute "Aux1","string"
+        attribute "Aux2","string"
+        attribute "coopStatus","string"
+        attribute "baseDoorCurrent","number"
+        attribute "photoCalibration","number"
+        attribute "baseCurrentNE","string"
+        
+    	fingerprint profileId: "0104", inClusters: "0000,0101,0402", manufacturer: "Solar-Current", model: "Coop Boss"
+    
+	}
+
+	// simulator metadata
+	simulator {
+    }
+    
+    
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffsetCoop", "number", title: "Coop Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input "tempOffsetOutside", "number", title: "Outside Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false        
+	}    
+       
+
+	// UI tile definitions
+	tiles(scale: 2){        
+		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{  
+			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
+			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+			} 
+            tileAttribute ("device.coopStatus", key: "SECONDARY_CONTROL") {
+				attributeState "device.coopStatus", label:'${currentValue}'
+			}
+        }
+                     
+		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{
+      		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
+            attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
+            attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
+            attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
+            attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"
+            } 
+            tileAttribute ("device.doorState", key: "SECONDARY_CONTROL") {
+				attributeState "unknown", label: 'Door is in unknown state. Push to open.'
+                attributeState "open", label: 'Coop door is open. Push to close.'
+                attributeState "opening", label: 'Caution, door is opening!'
+                attributeState "closed", label: 'Coop door is closed. Push to open.'
+                attributeState "closing", label: 'Caution, door is closing!'
+                attributeState "jammed", label: 'Door open! Push for high-force close'
+                attributeState "forced close", label: "Door is closed. Push to open."
+                attributeState "fault", label: 'Door fault check electrical connection.'
+                attributeState "Sent", label: 'Command sent to CoopBoss...'
+			}                 
+    	}        
+        
+		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}    
+        
+		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}            
+        
+		valueTile("TempProb1", "device.TempProb1", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Coop\r${currentValue}°', unit:"F", action:"updateTemp1"}         
+        
+		valueTile("TempProb2", "device.TempProb2", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Outside\r${currentValue}°', unit:"F", action:"updateTemp2"}        
+
+		valueTile("currentLevel", "device.currentLightLevel", width: 2, height: 2, decoration: "flat") {
+        state "default", label:'Sun\r${currentValue}', action:"updateSun"}    
+                
+        valueTile("dayOrNight", "device.dayOrNight", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'${currentValue}.'
+        }             
+                
+        controlTile("SetClSlider", "device.closeLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "closeLightLevel", action:"setCloseLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetClValue", "device.closeLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Close\nSunlight\n${currentValue}', action:'updateCloseLightLevel'
+        }        
+        
+        controlTile("SetOpSlider", "device.openLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setOpenLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetOpValue", "device.openLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Open\nSunlight\n${currentValue}', action:'updateOpenLightLevel'
+        } 
+        
+        controlTile("SetSensitivitySlider", "device.doorSensitivity", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setSensitivityLevel", backgroundColor:"#d04e00"
+        }        
+        
+        valueTile("SetSensitivityValue", "device.doorSensitivity", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Door\nSensitivity\n${currentValue}', action:'updateSensitivity'
+        }          
+        
+        standardTile("refresh", "device.refresh", width: 2, height: 2, decoration: "flat", inactiveLabel: false) {
+		state "default", label:'All', action:"refresh.refresh", icon:"st.secondary.refresh-icon"
+		}   
+        
+		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
+		}        
+        
+		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
+		}            
+        
+		main "doorCtrl"
+		details (["dtlsDoorCtrl", "TempProb1", "TempProb2", "currentLevel", "autoClose", "autoOpen", "dayOrNight",
+        "SetClSlider", "SetClValue", "SetOpSlider", "SetOpValue", "SetSensitivitySlider", "SetSensitivityValue",
+        "aux1", "aux2", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events  def parse(String description) {
+def parse(String description) {
+	log.debug "description: $description"
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    log.debug map
+	//return map ? createEvent(map) : null
+    sendEvent(map)
+    callUpdateStatusTxt() 
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]    
+    def cluster = zigbee.parse(description)
+    log.debug cluster
+    if (cluster.clusterId == 0x0402) {
+        switch(cluster.sourceEndpoint) {
+
+            case 0x39:		// Endpoint 0x39 is the temperature of probe 1
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb1"
+            def celsius = Integer.valueOf(temp,16).shortValue()    
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+                celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)		
+                if (tempOffsetOutside) {
+                    def offset = tempOffsetOutside as int
+					resultMap.value = resultMap.value + offset
+                }                      
+            }
+            sendEvent(name: "temperature", value: resultMap.value, displayed: false)		// set the temperatureMeasurment capability to temperature
+            break
+
+            case 0x40:													// Endpoint 0x40 is the temperature of probe 2
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb2"
+            def celsius = Integer.valueOf(temp,16).shortValue() 									
+            //resultMap.descriptionText = "Prob2 celsius value = ${celsius}"
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+            	celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)			
+                if (tempOffsetCoop) {
+                    def offset = tempOffsetCoop as int
+					resultMap.value = resultMap.value + offset
+                }                                                
+            }                           
+            break
+    	}                        
+	}
+    
+    if (cluster.clusterId == 0x0101 && cluster.command == 0x0b) {		// This is a default response to a command sent to cluster 0x0101 door control
+    	//log.debug "Default Response Data = $cluster.data"
+        switch(cluster.data) {
+        
+        case "[10, 0]":		// 0x0a turn auto close on command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "on"        
+        break                 
+        
+        case "[11, 0]":		// 0x0b turn auto close off command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "off"        
+        break            
+        
+        case "[12, 0]":		// 0x0C turn auto open on command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "on"        
+        break    
+        
+        case "[13, 0]":		// 0x0d turn auto open off command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "off"        
+        break               
+        
+        
+        case "[20, 0]":		// 0x14 Aux1 On command verified 
+        log.info "verified Aux1 On"
+    	sendEvent(name: "switch", value: "on", displayed: false)   
+        resultMap.name = "Aux1"
+        resultMap.value = "on"        
+        break
+
+        case "[21, 0]":		// 0x15 Aux1 Off command verified 
+        log.info "verified Aux1 Off"
+    	sendEvent(name: "switch", value: "off", displayed: false)
+        resultMap.name = "Aux1"
+        resultMap.value = "off"
+        break
+        
+        case "[22, 0]":		// 0x16 Aux2 On command verified 
+        log.info "verified Aux2 On"    
+        resultMap.name = "Aux2"
+        resultMap.value = "on"        
+        break
+
+        case "[23, 0]":		// 0x17 Aux2 Off command verified 
+        log.info "verified Aux2 Off"
+        resultMap.name = "Aux2"
+        resultMap.value = "off"        
+        break        
+        
+        }
+    }
+    return resultMap
+}
+
+private Map parseReportAttributeMessage(String description) {
+    Map resultMap = [:]
+    def descMap = parseDescriptionAsMap(description)
+    //log.debug "read attr descMap --> $descMap"
+    if (descMap.cluster == "0101" && descMap.attrId == "0003") {
+        resultMap.name = "doorState"
+        if (descMap.value == "00"){
+            resultMap.value = "unknown"
+            sendEvent(name: "door", value: "unknown", displayed: false)
+        }else if(descMap.value == "01"){
+            resultMap.value = "closed"
+            sendEvent(name: "door", value: "closed", displayed: false)            
+        }else if(descMap.value == "02"){
+            resultMap.value = "open"    
+            sendEvent(name: "door", value: "open", displayed: false)              
+        }else if(descMap.value == "03"){
+            resultMap.value = "jammed"     
+        }else if(descMap.value == "04"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "05"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "06"){
+            resultMap.value = "closing"  
+            sendEvent(name: "door", value: "closing", displayed: false)              
+        }else if(descMap.value == "07"){
+            resultMap.value = "opening"
+            sendEvent(name: "door", value: "opening", displayed: false)                 
+        }else if(descMap.value == "08"){
+            resultMap.value = "fault"            
+        }else {            
+            resultMap.value = "unknown"
+        }   
+        resultMap.descriptionText = "Door State Changed to ${resultMap.value}"
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0400") { 
+        resultMap.name = "currentLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))      
+        resultMap.displayed = false
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0401") { 
+        resultMap.name = "closeLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0402") { 
+        resultMap.name = "openLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0403") { 
+        resultMap.name = "autoCloseEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}       
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0404") { 
+        resultMap.name = "autoOpenEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}  
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0405") { 
+        resultMap.name = "doorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001        
+
+     } else if (descMap.cluster == "0101" && descMap.attrId == "0408") { 
+        resultMap.name = "doorSensitivity"
+        resultMap.value = (100 - Integer.parseInt(descMap.value, 16))
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0409") { 
+        resultMap.name = "baseDoorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001                
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040a") { 
+        resultMap.name = "doorVoltage"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))  
+        resultMap.value = resultMap.value * 0.001
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040b") { 
+        resultMap.name = "Aux1"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+    	sendEvent(name: "switch", value: "on", displayed: false)        
+        }else{
+        resultMap.value = "off"        
+    	sendEvent(name: "switch", value: "off", displayed: false)        
+        }
+     
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040c") { 
+        resultMap.name = "Aux2"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+        }else{
+        resultMap.value = "off"        
+        }   
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040d") { 
+        resultMap.name = "photoCalibration"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040e") { 
+        resultMap.name = "baseCurrentNE"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    }    
+    return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+    //log.info "ParseCustomMessage called with ${description}"
+	Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        resultMap.name = "temperature"
+    	def rawT = (description - "temperature: ").trim()
+        resultMap.descriptionText = "Temperature celsius value = ${rawT}"
+        def rawTint = Float.parseFloat(rawT)
+        if (rawTint > 65){
+        	resultMap.name = null
+            resultMap.value = null
+            resultMap.descriptionText = "Temperature celsius value = ${rawT} is invalid not updating"
+            log.warn "Invalid temperature value detected! rawT = ${rawT}, description = ${description}"
+        }else if (rawT ==  -32768){											// This number is used to indicate an error in the temperature reading
+            resultMap.value = "ERR"
+        }else{
+            resultMap.value = celsiusToFahrenheit(rawT.toFloat()) as Float
+            sendEvent(name: "TempProb1", value: resultMap.value, displayed: false)		// Workaround for lack of access to endpoint information for Temperature report  
+        }        
+	}
+    resultMap.displayed = false
+    log.info "Temperature reported = ${resultMap.value}"
+    return resultMap    
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+// Added for Temeperature parse
+def getFahrenheit(value) {
+	def celsius = Integer.parseInt(value, 16)
+	return celsiusToFahrenheit(celsius) as Integer
+}
+
+// Private methods
+def callUpdateStatusTxt(){	
+	def cTemp = device.currentState("TempProb1")?.value
+    def cLight = 0
+    def testNull = device.currentState("currentLightLevel")?.value
+    if (testNull != null){
+    cLight = device.currentState("currentLightLevel")?.value as int
+    }   
+	updateStatusTxt(cTemp, cLight)
+}
+
+def updateStatusTxt(currentTemp, currentLight){
+	//log.info "called updateStatusTxt with ${currentTemp}, ${currentLight}"
+    def cTmp = currentTemp
+    def cLL = 10
+    def oLL = 10
+    
+    def testNull = device.currentState("closeLightLevel")?.value
+    if (testNull != null){
+    	cLL = device.currentState("closeLightLevel")?.value as int
+	}
+
+    testNull = device.currentState("openLightLevel")?.value
+    if (testNull != null){
+    	oLL = device.currentState("openLightLevel")?.value as int
+    }   
+    
+    def aOpnEn = device.currentState("autoOpenEnable")?.value
+    def aClsEn = device.currentState("autoCloseEnable")?.value
+    
+        if (currentLight < cLL){  
+        	if (aOpnEn == "on"){
+           		sendEvent(name: "dayOrNight", value: "Sun must be > ${oLL} to auto open", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} open at ${oLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Open is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto open off. Coop ${cTmp}°", displayed: false)                
+                }
+        }else { 
+        	if (aClsEn == "on"){        
+            	sendEvent(name: "dayOrNight", value: "Sun must be < ${cLL} to auto close", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} close at ${cLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Close is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto close off. Coop ${cTmp}°", displayed: false)                   
+                }
+        }
+}
+
+// Commands to device
+def on() {
+	log.debug "on calling Aux1On"
+    Aux1On()
+}
+
+def off() {
+	log.debug "off calling Aux1Off"
+    Aux1Off()
+}
+
+def close() {
+	log.debug "close calling closeDoor"
+	closeDoor()
+}
+
+def open() {
+	log.debug "open calling openDoor"
+	openDoor()
+}
+
+def Aux1On(){
+	log.debug "Sending Aux1 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x14 {}"             
+}
+
+def Aux1Off(){     
+	log.debug "Sending Aux1 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x15 {}"             
+}
+
+def Aux2On(){
+	log.debug "Sending Aux2 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x16 {}"             
+}
+
+def Aux2Off(){
+	log.debug "Sending Aux2 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x17 {}"             
+}
+
+def openDoor() {
+	log.debug "Sending Open command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x1 {}"
+}
+
+def closeDoor() {
+	log.debug "Sending Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0 {}"
+}
+
+def closeDoorHiI() {
+	log.debug "Sending High Current Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x4 {}"
+}
+
+def autoOpenOn() {
+	log.debug "Setting Auto Open On"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0C {}"
+}
+
+def autoOpenOff() {
+	log.debug "Setting Auto Open Off"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0D {}"
+}
+
+def autoCloseOn() {
+	log.debug "Setting Auto Close On"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0A {}"
+}
+
+def autoCloseOff() {
+	log.debug "Setting Auto Close Off"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0B {}"
+}
+
+def setOpenLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Open Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402"											// Read light value   
+    cmd    
+}
+
+def setCloseLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Close Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401"											// Read light value   
+    cmd 
+    
+}
+
+def setSensitivityLevel(cValue) {
+	def cX = 100 - cValue
+	log.debug "Setting Door sensitivity level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value. 
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408"											// Read attribute 
+    cmd    
+}
+
+def setNewBaseCurrent(cValue) {
+	def cX = cValue as int
+	log.info "Setting new BaseCurrent to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value.
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"											// Read attribute 
+    cmd    
+}
+
+def setNewPhotoCalibration(cValue) {
+	def cX = cValue as int
+	log.info "Setting new Photoresister calibration to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D 0x2B {${Integer.toHexString(cX)}}"		// Write attribute.  0x2B is a 32 bit signed integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readNewPhotoCalibration() {
+	log.info "Requesting current Photoresister calibration "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readBaseCurrentNE() {
+	log.info "Requesting base current never exceed setting "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def setBaseCurrentNE(cValue) {
+	def cX = cValue as int
+	log.info "Setting new base Current Never Exceed to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit unsigned integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def poll(){
+	log.debug "Polling Device"
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read probe 1 Temperature 
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read probe 2 Temperature        
+    
+    cmd
+}
+
+def updateTemp1() {
+	log.debug "Sending attribute read request for Temperature Probe1"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd
+}
+
+def updateTemp2() {
+	log.debug "Sending attribute read request for Temperature Probe2"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2   
+    cmd
+}
+
+
+def updateSun() {
+	log.debug "Sending attribute read request for Sun Light Level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd
+}
+
+def updateSensitivity() {
+	log.debug "Sending attribute read request for door sensitivity"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"	// Read Door sensitivity
+    cmd
+}
+
+def updateCloseLightLevel() {
+	log.debug "Sending attribute read close light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	
+    cmd
+}
+
+def updateOpenLightLevel() {
+	log.debug "Sending attribute read open light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	
+    cmd
+}
+
+def refresh() {
+	log.debug "sending refresh command"   
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	// Read Door Close Light Level
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	// Read Door Open Light Level
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0403"	// Read Auto Door Close Settings 
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0404"	// Read Auto Door Open Settings
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd << "delay 150" 
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"    // Object detection sensitivity 
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2    
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0405"    // Current required to close door      
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040B"    // Aux1 Status      
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040C"    // Aux2 Status      
+    cmd << "delay 150"     
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"		// Read Base current
+
+    cmd
+}
+
+def configure() {
+    log.debug "Binding SEP 0x38 DEP 0x01 Cluster 0x0101 Lock cluster to hub"  
+    log.debug "Binding SEP 0x39 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    log.debug "Binding SEP 0x40 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    
+    def cmd = []
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x38 0x01 0x0101 {${device.zigbeeId}} {}"			// Bind to end point 0x38 and the lock cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x39 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x39 and the temperature cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x40 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x40 and the temperature cluster
+    cmd << "delay 1500"    
+    
+    log.info "Sending ZigBee Configuration Commands to Coop Control"
+    return cmd + refresh()
+}
+
+

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,16 +1,16 @@
 #==============================================================================
 #  Copyright 2016 SmartThings
 #
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+#  use this file except in compliance with the License. You may obtain a copy
 #  of the License at:
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#  License for the specific language governing permissions and limitations
 #  under the License.
 #==============================================================================
 # Purpose: Arrival Sensor HA i18n Translation File
@@ -23,13 +23,14 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
-'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
 '''Tap to set'''.ko=눌러서 설정
 '''Arrival Sensor'''.ko=도착알림 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events / Notifications
-'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
 #==============================================================================

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -0,0 +1,227 @@
+/**
+ *  Hue Bloom
+ *
+ *  Philips Hue Type "Color Light"
+ *
+ *  Author: SmartThings
+ */
+
+// for the UI
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Hue Bloom", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+        command "reset"
+        command "refresh"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles (scale: 2){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+
+		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["rich-control"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+void on() {
+	log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+void off() {
+	log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+void nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+void setLevel(percent) {
+    log.debug "Executing 'setLevel'"
+    if (verifyPercent(percent)) {
+        parent.setLevel(this, percent)
+        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
+        sendEvent(name: "switch", value: "on")
+    }
+}
+
+void setSaturation(percent) {
+    log.debug "Executing 'setSaturation'"
+    if (verifyPercent(percent)) {
+        parent.setSaturation(this, percent)
+        sendEvent(name: "saturation", value: percent, displayed: false)
+    }
+}
+
+void setHue(percent) {
+    log.debug "Executing 'setHue'"
+    if (verifyPercent(percent)) {
+        parent.setHue(this, percent)
+        sendEvent(name: "hue", value: percent, displayed: false)
+    }
+}
+
+void setColor(value) {
+    log.debug "setColor: ${value}, $this"
+    def events = []
+    def validValues = [:]
+
+    if (verifyPercent(value.hue)) {
+        events << createEvent(name: "hue", value: value.hue, displayed: false)
+        validValues.hue = value.hue
+    }
+    if (verifyPercent(value.saturation)) {
+        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
+        validValues.saturation = value.saturation
+    }
+    if (value.hex != null) {
+        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
+            events << createEvent(name: "color", value: value.hex)
+            validValues.hex = value.hex
+        } else {
+            log.warn "$value.hex is not a valid color"
+        }
+    }
+    if (verifyPercent(value.level)) {
+        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
+        validValues.level = value.level
+    }
+    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
+        events << createEvent(name: "switch", value: "off")
+        validValues.switch = "off"
+    } else {
+        events << createEvent(name: "switch", value: "on")
+        validValues.switch = "on"
+    }
+    if (!events.isEmpty()) {
+        parent.setColor(this, validValues)
+    }
+    events.each {
+        sendEvent(it)
+    }
+}
+
+void reset() {
+    log.debug "Executing 'reset'"
+    def value = [level:100, saturation:56, hue:23]
+    setAdjustedColor(value)
+    parent.poll()
+}
+
+void setAdjustedColor(value) {
+    if (value) {
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
+        // Needed because color picker always sends 100
+        adjusted.level = null
+        setColor(adjusted)
+    } else {
+        log.warn "Invalid color input"
+    }
+}
+
+void setColorTemperature(value) {
+    if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+        sendEvent(name: "switch", value: "on")
+    } else {
+        log.warn "Invalid color temperature"
+    }
+}
+
+void refresh() {
+    log.debug "Executing 'refresh'"
+    parent.manualRefresh()
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+
+def verifyPercent(percent) {
+    if (percent == null)
+        return false
+    else if (percent >= 0 && percent <= 100) {
+        return true
+    } else {
+        log.warn "$percent is not 0-100"
+        return false
+    }
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,6 +1,8 @@
 /**
  *  Hue Bulb
  *
+ *  Philips Hue Type "Extended Color Light"
+ *
  *  Author: SmartThings
  */
 
@@ -28,10 +30,10 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
@@ -69,11 +71,13 @@ metadata {
 def parse(description) {
 	log.debug "parse() - $description"
 	def results = []
+
 	def map = description
 	if (description instanceof String)  {
 		log.debug "Hue Bulb stringToMap - ${map}"
 		map = stringToMap(description)
 	}
+
 	if (map?.name && map?.value) {
 		results << createEvent(name: "${map?.name}", value: "${map?.value}")
 	}
@@ -229,4 +233,4 @@ def verifyPercent(percent) {
         log.warn "$percent is not 0-100"
         return false
     }
-}
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,6 +1,8 @@
 /**
  *  Hue Lux Bulb
  *
+ *  Philips Hue Type "Dimmable Light"
+ *
  *  Author: SmartThings
  */
 // for the UI
@@ -68,12 +70,12 @@ def parse(description) {
 
 // handle commands
 void on() {
-	parent.on(this)
+	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
-	parent.off(this)
+	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
@@ -82,6 +84,7 @@ void setLevel(percent) {
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
 		sendEvent(name: "level", value: percent)
+		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -23,10 +23,10 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
 '''present'''.ko=집안
 '''not present'''.ko=외출

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,6 +24,7 @@ metadata {
         command "enrollResponse"
  
  
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -22,14 +22,14 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Outlet'''.ko=플러그
+'''Give your device a name'''.ko=기기 이름 설정
+'''Outlet'''.ko= 스마트 플러그 
 # Events descriptionText
-'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
-'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
-'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
-'''On'''.ko=켜기
-'''Off'''.ko=끄기
-'''Turning On'''.ko=켜기
-'''Turning Off'''.ko=끄기
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
+'''On'''.ko= 켜짐
+'''Off'''.ko=꺼짐
+'''Turning On'''.ko=켜는 중
+'''Turning Off'''.ko=끄는 중
 #==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -31,6 +31,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -22,6 +22,8 @@
 #==============================================================================
 # Korean (ko)
 # Device Preferences
+'''Dry'''.ko=건조
+'''Wet'''.ko=누수
 '''dry'''.ko=건조
 '''wet'''.ko=누수
 '''battery'''.ko=배터리
@@ -29,13 +31,14 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Water Leak Sensor'''.ko=누수센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Water Leak Sensor'''.ko=누수감지 센서
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -31,6 +31,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
+		capability "Health Check"
 
 		command "enrollResponse"
 

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -28,13 +28,16 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Motion Sensor'''.ko=모션 센서
+'''motion'''.ko= 동작 감지 
+'''no motion'''.ko=동작 없음
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -31,6 +31,7 @@ metadata {
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Health Check"
 
 		command "enrollResponse"
 

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -31,19 +31,20 @@
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Multipurpose Sensor'''.ko=멀티 센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Multipurpose Sensor'''.ko=문 및 창 센서
 # Events descriptionText
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Inactive'''.ko=비활성
-'''Active'''.ko=활성
-'''Open'''.ko=열다
-'''Closed'''.ko=닫은
+'''Inactive'''.ko=비활성 상태
+'''Active'''.ko=활성 상태
+'''Open'''.ko= 열림이 감지될 때
+'''Closed'''.ko=닫힘
+'''${currentValue}% battery'''.ko=${currentValue}% 배터리

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -35,6 +35,7 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
+		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -23,8 +23,9 @@
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
+		capability "Health Check"
 
+		command "enrollResponse"
  	}
 
  	simulator {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}

devicetypes/smartthings/tile-ux/tile-basic-carousel.src/tile-basic-carousel.groovy

@@ -0,0 +1,225 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "carouselDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("default", action: "setTemperature")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+
+		main("thermostatMulti")
+		details([
+			"thermostatMulti"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -0,0 +1,52 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "colorWheelDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Color Control"
+	}
+
+	tiles(scale: 2) {
+		valueTile("currentColor", "device.color") {
+			state "default", label: '${currentValue}'
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
+			state "color", action: "color control.setColor"
+		}
+
+		main("currentColor")
+		details([
+			"rgbSelector"
+		])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def setSaturation(percent) {
+	log.debug "Executing 'setSaturation'"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "Executing 'setHue'"
+	sendEvent(name: "hue", value: percent)
+}

devicetypes/smartthings/tile-ux/tile-basic-presence.src/tile-basic-presence.groovy

@@ -0,0 +1,63 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "presenceDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Presence Sensor"
+
+		command "arrived"
+		command "departed"
+	}
+
+	tiles(scale: 2) {
+		// You only get a presence tile view when the size is 3x3 otherwise it's a value tile
+		standardTile("presence", "device.presence", width: 3, height: 3, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
+		}
+
+		standardTile("notPresentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("not present", label:'not present', backgroundColor:"#ffffff", action:"departed")
+		}
+
+		standardTile("presentBtn", "device.fake", width: 3, height: 3, decoration: "flat") {
+			state("present", label:'present', backgroundColor:"#53a7c0", action:"arrived")
+		}
+
+		main("presence")
+		details([
+			"presence", "presenceControl", "notPresentBtn", "presentBtn"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "present")
+}
+
+def parse(String description) {
+}
+
+def arrived() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "present")
+}
+
+def departed() {
+	log.trace "Executing 'arrived'"
+	sendEvent(name: "presence", value: "not present")
+}

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -0,0 +1,75 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "sliderDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		command "setRangedLevel", ["number"]
+	}
+
+	tiles(scale: 2) {
+		controlTile("tinySlider", "device.level", "slider", height: 2, width: 2, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("mediumSlider", "device.level", "slider", height: 2, width: 4, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("largeSlider", "device.level", "slider", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		controlTile("rangeSlider", "device.rangedLevel", "slider", height: 2, width: 4, range: "(20..80)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
+			state "level", action:"setRangedLevel"
+		}
+
+		main("rangeValue")
+		details([
+			"tinySlider", "mediumSlider",
+			"largeSlider",
+			"rangeSlider", "rangeValue",
+			"rangeSliderConstrained"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "level", value: 63)
+	sendEvent(name: "rangedLevel", value: 47)
+}
+
+def parse(String description) {
+}
+
+def setLevel(value) {
+	log.debug "setting level to $value"
+	sendEvent(name:"level", value:value)
+}
+
+def setRangedLevel(value) {
+	log.debug "setting ranged level to $value"
+	sendEvent(name:"rangedLevel", value:value)
+}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -0,0 +1,109 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "standardDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch"
+	}
+
+	tiles(scale: 2) {
+		// standard tile with actions
+		standardTile("actionRings", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with actions
+		standardTile("actionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true, decoration: "flat") {
+			state "off", label: '${currentValue}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile without actions
+		standardTile("noActionFlat", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${currentValue}',icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			state "on", label: '${currentValue}', icon: "st.switches.switch.on", backgroundColor: "#79b821"
+		}
+
+		// standard flat tile with only a label
+		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
+		}
+
+		// standard flat tile with icon and label
+		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+
+		// standard flat tile with only icon (Refreh text is IN the icon file)
+		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		// standard with defaultState = true
+		standardTile("flatDefaultState", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "on", label: 'Pass!', icon: "st.switches.switch.on", defaultState: true
+		}
+
+		// standard with implicit defaultState based on order (0 index is selected)
+		standardTile("flatImplicitDefaultState1", "null", width: 2, height: 2, decoration: "flat") {
+			state "on", label: 'Pass!', icon: "st.switches.switch.on"
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+		}
+
+		// standard with implicit defaultState based on state.name == default
+		standardTile("flatImplicitDefaultState2", "null", width: 2, height: 2, decoration: "flat") {
+			state "off", label: 'Fail!', icon: "st.switches.switch.off"
+			state "default", label: 'Pass!', icon: "st.switches.switch.on"
+		}
+
+		// utility tiles to fill the spaces
+		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
+			state "default", label:''
+		}
+		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
+			state "default", label:''
+		}
+
+		main("standard1")
+		details([
+			"actionRings", "actionFlat", "noActionFlat",
+
+			"flatLabel", "flatIconLabel", "flatIcon",
+
+			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "switch", value: "off")
+}
+
+def parse(String description) {
+}
+
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+}

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -0,0 +1,96 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "valueDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Sensor"
+	}
+
+	tiles(scale: 2) {
+		valueTile("text", "device.text", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("longText", "device.longText", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("integer", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("pi", "device.pi", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		valueTile("bgColor", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
+		}
+
+		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#ff0000"],
+				[value: 90, color: "#0000ff"]
+			]
+		}
+
+		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#333333"]
+			]
+		}
+
+		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
+			state "default", label:'${currentValue}', backgroundColors: [
+				[value: 10, color: "#990000"],
+				[value: 10, color: "#000099"]
+			]
+		}
+
+		valueTile("noValue", "device.nada", width: 2, height: 2) {
+			state "default", label:'${currentValue}'
+		}
+
+		main("text")
+		details([
+			"text", "longText", "integer", 
+            "integerFloat", "pi", "floatAsText",
+            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
+            "bgColorRangeConflict", "noValue"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "text", value: "Test")
+	sendEvent(name: "longText", value: "The Longer The Text, The Better The Test")
+	sendEvent(name: "integer", value: 47)
+	sendEvent(name: "integerFloat", value: 47.0)
+	sendEvent(name: "pi", value: 3.14159)
+	sendEvent(name: "floatAsText", value: "3.14159")
+}
+
+def parse(String description) {
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -0,0 +1,118 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "genericDeviceTile", namespace: "smartthings/tile-ux", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Switch Level"
+
+		command "levelUp"
+		command "levelDown"
+		command "randomizeLevel"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"basicTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		multiAttributeTile(name:"sliderTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
+			}
+			tileAttribute("device.level", key: "SLIDER_CONTROL") {
+				attributeState "default", action:"switch level.setLevel"
+			}
+		}
+		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'${currentValue}', backgroundColors:[
+					[value: 0, color: "#ff0000"],
+					[value: 20, color: "#ffff00"],
+					[value: 40, color: "#00ff00"],
+					[value: 60, color: "#00ffff"],
+					[value: 80, color: "#0000ff"],
+					[value: 100, color: "#ff00ff"]
+				]
+			}
+			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute("device.level", key: "VALUE_CONTROL") {
+				attributeState "VALUE_UP", action: "levelUp"
+				attributeState "VALUE_DOWN", action: "levelDown"
+			}
+		}
+
+		main(["basicTile"])
+		details(["basicTile", "sliderTile", "valueTile"])
+	}
+}
+
+def installed() {
+
+}
+
+def parse() {
+	// This is a simulated device. No incoming data to parse.
+}
+
+def on() {
+	log.debug "turningOn"
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	log.debug "turningOff"
+	sendEvent(name: "switch", value: "off")
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+}
+
+def randomizeLevel() {
+	def level = Math.round(Math.random() * 100)
+	setLevel(level)
+}
+
+def levelUp() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level < 100) {
+		level = level + 1
+	}
+	setLevel(level)
+}
+
+def levelDown() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level > 0) {
+		level = level - 1
+	}
+	setLevel(level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -0,0 +1,211 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "lightingDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Color Control"
+		capability "Power Meter"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+
+		command "setAdjustedColor"
+		command "reset"
+		command "refresh"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'Power level: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoPower", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSlider", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The power level is currently: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setAdjustedColor"
+			}
+		}
+
+		multiAttributeTile(name:"switchNoSliderOrColor", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'The light is currently consuming this amount of power: ${currentValue}W', icon: "st.Appliances.appliances17"
+			}
+		}
+
+		valueTile("color", "device.color", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "color", label: '${currentValue}'
+		}
+
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["switch"])
+		details(["switch", "switchNoPower", "switchNoSlider", "switchNoSliderOrColor", "color", "refresh", "reset"])
+	}
+}
+
+// parse events into attributes
+def parse(description) {
+	log.debug "parse() - $description"
+	def results = []
+	def map = description
+	if (description instanceof String)  {
+		log.debug "Hue Bulb stringToMap - ${map}"
+		map = stringToMap(description)
+	}
+	if (map?.name && map?.value) {
+		results << createEvent(name: "${map?.name}", value: "${map?.value}")
+	}
+	results
+}
+
+// handle commands
+def on() {
+	//log.trace parent.on(this)
+	sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+	//log.trace parent.off(this)
+	sendEvent(name: "switch", value: "off")
+}
+
+def nextLevel() {
+	def level = device.latestValue("level") as Integer ?: 0
+	if (level <= 100) {
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+	}
+	else {
+		level = 25
+	}
+	setLevel(level)
+}
+
+def setLevel(percent) {
+	log.debug "setLevel: ${percent}, this"
+	sendEvent(name: "level", value: percent)
+	def power = Math.round(percent / 1.175) * 0.1
+	sendEvent(name: "power", value: power)
+}
+
+def setSaturation(percent) {
+	log.debug "setSaturation: ${percent}, $this"
+	sendEvent(name: "saturation", value: percent)
+}
+
+def setHue(percent) {
+	log.debug "setHue: ${percent}, $this"
+	sendEvent(name: "hue", value: percent)
+}
+
+def setColor(value) {
+	log.debug "setColor: ${value}, $this"
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
+	if (value.level) { sendEvent(name: "level", value: value.level)}
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
+}
+
+def reset() {
+	log.debug "Executing 'reset'"
+	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+	//parent.poll()
+}
+
+def setAdjustedColor(value) {
+	if (value) {
+		log.trace "setAdjustedColor: ${value}"
+		def adjusted = value + [:]
+		adjusted.hue = adjustOutgoingHue(value.hue)
+		// Needed because color picker always sends 100
+		adjusted.level = null
+		setColor(adjusted)
+	}
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	//parent.manualRefresh()
+}
+
+def adjustOutgoingHue(percent) {
+	def adjusted = percent
+	if (percent > 31) {
+		if (percent < 63.0) {
+			adjusted = percent + (7 * (percent -30 ) / 32)
+		}
+		else if (percent < 73.0) {
+			adjusted = 69 + (5 * (percent - 62) / 10)
+		}
+		else {
+			adjusted = percent + (2 * (100 - percent) / 28)
+		}
+	}
+	log.info "percent: $percent, adjusted: $adjusted"
+	adjusted
+}
+

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -0,0 +1,122 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "mediaPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Music Player"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "mediaMulti", type:"mediaPlayer", width:6, height:4) {
+			tileAttribute("device.status", key: "PRIMARY_CONTROL") {
+				attributeState("paused", label:"Paused",)
+				attributeState("playing", label:"Playing")
+				attributeState("stopped", label:"Stopped")
+			}
+			tileAttribute("device.status", key: "MEDIA_STATUS") {
+				attributeState("paused", label:"Paused", action:"music Player.play", nextState: "playing")
+				attributeState("playing", label:"Playing", action:"music Player.pause", nextState: "paused")
+				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
+			}
+			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
+				attributeState("default", action:"music Player.previousTrack")
+			}
+			tileAttribute("device.status", key: "NEXT_TRACK") {
+				attributeState("default", action:"music Player.nextTrack")
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState("level", action:"music Player.setLevel")
+			}
+			tileAttribute ("device.mute", key: "MEDIA_MUTED") {
+				attributeState("unmuted", action:"music Player.mute", nextState: "muted")
+				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
+			}
+			tileAttribute("device.trackDescription", key: "MARQUEE") {
+				attributeState("default", label:"${currentValue}")
+			}
+		}
+
+		main "mediaMulti"
+		details(["mediaMulti"])
+	}
+}
+
+def installed() {
+	state.tracks = [
+		"Gangnam Style (강남스타일)\nPSY\nPsy 6 (Six Rules), Part 1",
+		"Careless Whisper\nWham!\nMake It Big",
+		"Never Gonna Give You Up\nRick Astley\nWhenever You Need Somebody",
+		"Shake It Off\nTaylor Swift\n1989",
+		"Ironic\nAlanis Morissette\nJagged Little Pill",
+		"Hotline Bling\nDrake\nHotline Bling - Single"
+	]
+	state.currentTrack = 0
+
+	sendEvent(name: "level", value: 72)
+	sendEvent(name: "mute", value: "unmuted")
+	sendEvent(name: "status", value: "stopped")
+}
+
+def parse(description) {
+	// No parsing will happen with this simulated device.
+}
+
+def play() {
+	sendEvent(name: "status", value: "playing")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def pause() {
+	sendEvent(name: "status", value: "paused")
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def stop() {
+	sendEvent(name: "status", value: "stopped")
+}
+
+def previousTrack() {
+	state.currentTrack = state.currentTrack - 1
+	if (state.currentTrack < 0)
+		state.currentTrack = state.tracks.size()-1
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def nextTrack() {
+	state.currentTrack = state.currentTrack + 1
+	if (state.currentTrack == state.tracks.size())
+		state.currentTrack = 0
+
+	sendEvent(name: "trackDescription", value: state.tracks[state.currentTrack])
+}
+
+def mute() {
+	sendEvent(name: "mute", value: "muted")
+}
+
+def unmute() {
+	sendEvent(name: "mute", value: "unmuted")
+}
+
+def setLevel(level) {
+	sendEvent(name: "level", value: level)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -0,0 +1,341 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "thermostatDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Thermostat"
+		capability "Relative Humidity Measurement"
+
+		command "tempUp"
+		command "tempDown"
+		command "heatUp"
+		command "heatDown"
+		command "coolUp"
+		command "coolDown"
+		command "setTemperature", ["number"]
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'${currentValue}%', unit:"%")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("cooling", backgroundColor:"#269bd2")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'${name}')
+				attributeState("heat", label:'${name}')
+				attributeState("cool", label:'${name}')
+				attributeState("auto", label:'${name}')
+			}
+			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+		}
+		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("default", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
+			}
+		}
+
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}', unit:"dF",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"tempDown"
+		}
+		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"tempUp"
+		}
+
+		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
+		}
+		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"heatDown"
+		}
+		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"heatUp"
+		}
+
+		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
+		}
+		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'down', action:"coolDown"
+		}
+		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'up', action:"coolUp"
+		}
+
+		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "off", label:'${name}', action:"thermostat.heat", backgroundColor:"#ffffff"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffa81e"
+			state "cool", label:'${name}', action:"thermostat.auto", backgroundColor:"#269bd2"
+			state "auto", label:'${name}', action:"thermostat.off", backgroundColor:"#79b821"
+		}
+		standardTile("fanMode", "device.thermostatFanMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"
+			state "fanOn", label:'${name}', action:"thermostat.fanCirculate", backgroundColor:"#ffffff"
+			state "fanCirculate", label:'${name}', action:"thermostat.fanAuto", backgroundColor:"#ffffff"
+		}
+		standardTile("operatingState", "device.thermostatOperatingState", width: 2, height: 2) {
+			state "idle", label:'${name}', backgroundColor:"#ffffff"
+			state "heating", label:'${name}', backgroundColor:"#ffa81e"
+			state "cooling", label:'${name}', backgroundColor:"#269bd2"
+		}
+
+
+		main("thermostatFull")
+		details([
+			"thermostatFull", "thermostatNoHumidity", "thermostatBasic",
+			"temperature","tempDown","tempUp",
+			"mode", "fanMode", "operatingState",
+			"heatingSetpoint", "heatDown", "heatUp",
+			"coolingSetpoint", "coolDown", "coolUp"
+		])
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: 72, unit: "F")
+	sendEvent(name: "heatingSetpoint", value: 70, unit: "F")
+	sendEvent(name: "thermostatSetpoint", value: 70, unit: "F")
+	sendEvent(name: "coolingSetpoint", value: 76, unit: "F")
+	sendEvent(name: "thermostatMode", value: "off")
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+	sendEvent(name: "thermostatOperatingState", value: "idle")
+	sendEvent(name: "humidity", value: 53, unit: "%")
+}
+
+def parse(String description) {
+}
+
+def evaluate(temp, heatingSetpoint, coolingSetpoint) {
+	log.debug "evaluate($temp, $heatingSetpoint, $coolingSetpoint"
+	def threshold = 1.0
+	def current = device.currentValue("thermostatOperatingState")
+	def mode = device.currentValue("thermostatMode")
+
+	def heating = false
+	def cooling = false
+	def idle = false
+	if (mode in ["heat","emergency heat","auto"]) {
+		if (heatingSetpoint - temp >= threshold) {
+			heating = true
+			sendEvent(name: "thermostatOperatingState", value: "heating")
+		}
+		else if (temp - heatingSetpoint >= threshold) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+	if (mode in ["cool","auto"]) {
+		if (temp - coolingSetpoint >= threshold) {
+			cooling = true
+			sendEvent(name: "thermostatOperatingState", value: "cooling")
+		}
+		else if (coolingSetpoint - temp >= threshold && !heating) {
+			idle = true
+		}
+		sendEvent(name: "thermostatSetpoint", value: coolingSetpoint)
+	}
+	else {
+		sendEvent(name: "thermostatSetpoint", value: heatingSetpoint)
+	}
+
+	if (mode == "off") {
+		idle = true
+	}
+
+	if (idle && !heating && !cooling) {
+		sendEvent(name: "thermostatOperatingState", value: "idle")
+	}
+}
+
+def setHeatingSetpoint(Double degreesF) {
+	log.debug "setHeatingSetpoint($degreesF)"
+	sendEvent(name: "heatingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), degreesF, device.currentValue("coolingSetpoint"))
+}
+
+def setCoolingSetpoint(Double degreesF) {
+	log.debug "setCoolingSetpoint($degreesF)"
+	sendEvent(name: "coolingSetpoint", value: degreesF)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), degreesF)
+}
+
+def setThermostatMode(String value) {
+	sendEvent(name: "thermostatMode", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setThermostatFanMode(String value) {
+	sendEvent(name: "thermostatFanMode", value: value)
+}
+
+def off() {
+	sendEvent(name: "thermostatMode", value: "off")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heat() {
+	sendEvent(name: "thermostatMode", value: "heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def auto() {
+	sendEvent(name: "thermostatMode", value: "auto")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def emergencyHeat() {
+	sendEvent(name: "thermostatMode", value: "emergency heat")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def cool() {
+	sendEvent(name: "thermostatMode", value: "cool")
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def fanOn() {
+	sendEvent(name: "thermostatFanMode", value: "fanOn")
+}
+
+def fanAuto() {
+	sendEvent(name: "thermostatFanMode", value: "fanAuto")
+}
+
+def fanCirculate() {
+	sendEvent(name: "thermostatFanMode", value: "fanCirculate")
+}
+
+def poll() {
+	null
+}
+
+def tempUp() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue + 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def tempDown() {
+	def ts = device.currentState("temperature")
+	def value = ts ? ts.integerValue - 1 : 72
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def setTemperature(value) {
+	def ts = device.currentState("temperature")
+	sendEvent(name:"temperature", value: value)
+	evaluate(value, device.currentValue("heatingSetpoint"), device.currentValue("coolingSetpoint"))
+}
+
+def heatUp() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+def heatDown() {
+	def ts = device.currentState("heatingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 68
+	sendEvent(name:"heatingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), value, device.currentValue("coolingSetpoint"))
+}
+
+
+def coolUp() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue + 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}
+
+def coolDown() {
+	def ts = device.currentState("coolingSetpoint")
+	def value = ts ? ts.integerValue - 1 : 76
+	sendEvent(name:"coolingSetpoint", value: value)
+	evaluate(device.currentValue("temperature"), device.currentValue("heatingSetpoint"), value)
+}

devicetypes/smartthings/tile-ux/tile-multiattribute-videoplayer.src/tile-multiattribute-videoplayer.groovy

@@ -0,0 +1,169 @@
+/**
+ *  Copyright 2016 SmartThings, Inc.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (
+		name: "videoPlayerDeviceTile",
+		namespace: "smartthings/tile-ux",
+		author: "SmartThings") {
+
+		capability "Configuration"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Refresh"
+		capability "Switch"
+
+		// custom commands
+		command "start"
+		command "stop"
+		command "setProfileHD"
+		command "setProfileSDH"
+		command "setProfileSDL"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name: "videoPlayer", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+
+			tileAttribute("device.profile", key: "STREAM_QUALITY") {
+				attributeState("1", label: "720p", action: "setProfileHD", defaultState: true)
+				attributeState("2", label: "h360p", action: "setProfileSDH", defaultState: true)
+				attributeState("3", label: "l360p", action: "setProfileSDL", defaultState: true)
+			}
+
+			tileAttribute("device.betaLogo", key: "BETA_LOGO") {
+				attributeState("betaLogo", label: "", value: "", defaultState: true)
+			}
+		}
+		
+		multiAttributeTile(name: "videoPlayerMin", type: "videoPlayer", width: 6, height: 4) {
+			tileAttribute("device.switch", key: "CAMERA_STATUS") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", action: "switch.off", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", action: "switch.on", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", action: "refresh.refresh", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.errorMessage", key: "CAMERA_ERROR_MESSAGE") {
+				attributeState("errorMessage", label: "", value: "", defaultState: true)
+			}
+
+			tileAttribute("device.camera", key: "PRIMARY_CONTROL") {
+				attributeState("on", label: "Active", icon: "st.camera.dlink-indoor", backgroundColor: "#79b821", defaultState: true)
+				attributeState("off", label: "Inactive", icon: "st.camera.dlink-indoor", backgroundColor: "#ffffff")
+				attributeState("restarting", label: "Connecting", icon: "st.camera.dlink-indoor", backgroundColor: "#53a7c0")
+				attributeState("unavailable", label: "Unavailable", icon: "st.camera.dlink-indoor", backgroundColor: "#F22000")
+			}
+
+			tileAttribute("device.startLive", key: "START_LIVE") {
+				attributeState("live", action: "start", defaultState: true)
+			}
+
+			tileAttribute("device.stream", key: "STREAM_URL") {
+				attributeState("activeURL", defaultState: true)
+			}
+		}
+
+		main("videoPlayer")
+		details([
+			"videoPlayer", "videoPlayerMin"
+		])
+	}
+}
+
+def installed() {
+}
+
+def parse(String description) {
+}
+
+def refresh() {
+	log.trace "refresh()"
+	// no-op
+}
+
+def on() {
+	log.trace "on()"
+	// no-op
+}
+
+def off() {
+	log.trace "off()"
+	// no-op
+}
+
+def setProfile(profile) {
+	log.trace "setProfile(): ${profile}"
+	sendEvent(name: "profile", value: profile, displayed: false)
+}
+
+def setProfileHD() {
+	setProfile(1)
+}
+
+def setProfileSDH() {
+	setProfile(2)
+}
+
+def setProfileSDL() {
+	setProfile(3)
+}
+
+def start() {
+	log.trace "start()"
+	def dataLiveVideo = [
+		OutHomeURL  : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		InHomeURL   : "https://devimages.apple.com.edgekey.net/streaming/examples/bipbop_4x3/bipbop_4x3_variant.m3u8",
+		ThumbnailURL: "http://cdn.device-icons.smartthings.com/camera/dlink-indoor@2x.png",
+		cookie      : [key: "key", value: "value"]
+	]
+
+	def event = [
+		name           : "stream",
+		value          : groovy.json.JsonOutput.toJson(dataLiveVideo).toString(),
+		data		   : groovy.json.JsonOutput.toJson(dataLiveVideo),
+		descriptionText: "Starting the livestream",
+		eventType      : "VIDEO",
+		displayed      : false,
+		isStateChange  : true
+	]
+	sendEvent(event)
+}
+
+def stop() {
+	log.trace "stop()"
+}

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,7 +33,7 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -0,0 +1,194 @@
+/**
+ *  Iris Smart Fob
+ *
+ *  Copyright 2015 Mitch Pond
+ *	Presence code adapted from SmartThings Arrival Sensor HA device type
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+		capability "Battery"
+		capability "Button"
+        capability "Configuration"
+		capability "Presence Sensor"
+		capability "Sensor"
+        
+		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
+	}
+    
+    preferences{
+	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
+    		defaultValue: 3, displayDuringSetup: false)
+        input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
+        input "logging", "bool", title: "Enable debug logging",
+            defaultValue: false, displayDuringSetup: false
+    }
+
+	tiles(scale: 2) {
+    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
+            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+        }
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+        }
+		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["presence"])
+		details(["presence","button","battery"])
+	}
+}
+
+def parse(String description) {
+    def descMap = zigbee.parseDescriptionAsMap(description)
+    logIt descMap
+    state.lastCheckin = now()
+    logIt "lastCheckin = ${state.lastCheckin}"
+    handlePresenceEvent(true)
+    
+	def results = []
+    if (description?.startsWith('catchall:'))
+		results = parseCatchAllMessage(descMap)
+	else if (description?.startsWith('read attr -'))
+		results = parseReportAttributeMessage(descMap)
+    else logIt(descMap, "trace")
+        
+	return results;
+}
+
+def updated() {
+	startTimer()
+    configure()
+}
+
+def configure(){
+	logIt "Configuring Smart Fob..."
+	[
+	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
+    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
+    ] +
+    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
+}
+
+def parseCatchAllMessage(descMap) {
+    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
+    	handleButtonPress(descMap.sourceEndpoint as int)
+    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
+    	handleButtonRelease(descMap.sourceEndpoint as int)
+    else logIt("Parse: Unhandled message: ${descMap}","trace")
+}
+
+def parseReportAttributeMessage(descMap) {
+	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
+    else logIt descMap
+}
+
+private createBatteryEvent(percent) {
+	logIt "Battery level at " + percent
+	return createEvent([name: "battery", value: percent])
+}
+
+//this method determines if a press should count as a push or a hold and returns the relevant event type
+private handleButtonRelease(button) {
+	logIt "lastPress state variable: ${state.lastPress}"
+    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
+    
+    if (!state.lastPress) return sequenceError()
+	else if (state.lastPress.button != button) return sequenceError()
+    
+    def currentTime = now()
+    def startOfPress = state.lastPress?.time
+    def timeDif = currentTime - startOfPress
+    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
+    
+    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
+    
+    if (timeDif < 0) 
+    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
+    	return sequenceError()
+    else if (timeDif < holdTimeMillisec)
+    	return createButtonEvent(button,"pushed")
+    else 
+    	return createButtonEvent(button,"held")
+}
+
+private handleButtonPress(button) {
+	state.lastPress = [button: button, time: now()]
+}
+
+private createButtonEvent(button,action) {
+	logIt "Button ${button} ${action}"
+	return createEvent([
+    	name: "button",
+        value: action, 
+        data:[buttonNumber: button], 
+        descriptionText: "${device.displayName} button ${button} was ${action}",
+        isStateChange: true, 
+        displayed: true])
+}
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+private handlePresenceEvent(present) {
+    def wasPresent = device.currentState("presence")?.value == "present"
+    if (!wasPresent && present) {
+        logIt "Sensor is present"
+        startTimer()
+    } else if (!present) {
+        logIt "Sensor is not present"
+        stopTimer()
+    }
+    def linkText = getLinkText(device)
+    def eventMap = [
+        name: "presence",
+        value: present ? "present" : "not present",
+        linkText: linkText,
+        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+    ]
+    logIt "Creating presence event: ${eventMap}"
+    sendEvent(eventMap)
+}
+
+private startTimer() {
+    logIt "Scheduling periodic timer"
+    schedule("0 * * * * ?", checkPresenceCallback)
+}
+
+private stopTimer() {
+    logIt "Stopping periodic timer"
+    unschedule()
+}
+
+def checkPresenceCallback() {
+    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
+    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
+    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
+    if (timeSinceLastCheckin >= theCheckInterval) {
+        handlePresenceEvent(false)
+    }
+}
+
+// ****** Utility functions ******
+
+private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -245,6 +245,7 @@ def retypeBasedOnMSR() {
 			break
 		case "011F-0001-0001":  // Schlage motion
 		case "014A-0001-0001":  // Ecolink motion
+		case "014A-0004-0001":  // Ecolink motion +
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC

smartapps/eyxar/eyxar-notifications.src/eyxar-notifications.groovy

@@ -0,0 +1,136 @@
+/**
+ *  Copyright 2016 EyXAR
+ *
+ *  All rights reserved. No part of this code may be reproduced, distributed, or modified in any form or by any means,
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. 
+ * 
+ *  For ST app: https://play.google.com/store/apps/details?id=eyxar.com.forst
+ *  http://www.eyxar.com
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  EyXAr Notifications
+ *
+ *  Author: EyXAr
+ *  Published: 2016-02-14
+ */
+
+
+definition(
+    name: "EyXAr Notifications",
+    namespace: "eyxar",
+    author: "EyXAr",
+    description: "Enable SmartThings the capability to add voice notifications to your Phones or Tablet anywhere in conjuction with For ST app. https://play.google.com/store/apps/details?id=eyxar.com.forst",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/for-st/For_ST_60px.png",
+    iconX2Url: "https://s3.amazonaws.com/for-st/For_ST_120px.png",
+    iconX3Url: "https://s3.amazonaws.com/for-st/For_ST_256px.png"
+    )
+
+/* For ST will only work if EyXAr Notification is installed and set-up first. */
+
+preferences {
+     section("EyXAr Auto Notifications - For Voice Notification, Install the app 'FOR ST' in Google Play")
+      {
+        input "door", "capability.contactSensor", title: "Monitor Contact Sensor When Nobody's Home", required: false, multiple: true
+    }   
+
+    section("Send Notifications by Text or use below option?") {
+        input("recipients", "contact", title: "Send notifications to"){
+        input "phone", "phone", title: "Phone Number (optional, text charges may apply)",
+                description: "Phone Number", required: false
+        }
+    }
+
+ section("If combine with 'For ST' android app, this will add features of voice notifications.") {
+        input "sendPush", "bool", required: false,
+              title: "Phone/Tablet Auto Notification (Must be set to On =>>)"
+        }   
+    }
+
+/* Presense */    
+
+ section("Arriving and Leaving Auto Notifications - For Voice notifications install 'FOR ST' in Google Play") {
+    input "presence", "capability.presenceSensor", title: "Select Phone/Tablet to Detect (Set Specific Mode Below to Minimize Notifications)", required: false, multiple: true
+      }
+
+def installed() {
+    initialize()
+/* Presense */     
+    subscribe(door, "contact.open", doorOpenHandler)
+    subscribe(door, "contact.closed", doorClosedHandler)
+    subscribe(presence, "presence", myHandler)
+    subscribe(presence, "presence", presenceHandler)
+}
+
+def updated() {
+    initialize()
+}
+
+def initialize() {
+    subscribe(door, "contact.open", doorOpenHandler)
+    subscribe(door, "contact.closed", doorClosedHandler)
+    subscribe(presence, "presence", myHandler)
+    subscribe(presence, "presence", presenceHandler)
+    
+}
+
+def doorOpenHandler(evt) {
+    def message = "EyXAr Detected the ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def doorClosedHandler(evt) {
+    def message = "EyXAr Detected the ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def contactHandler(evt) {
+  if("open" == evt.value)
+
+    // contact was opened, turn on a light maybe?
+    log.debug "Contact is in ${evt.value} state"
+
+  if("closed" == evt.value)
+    // contact was closed, turn off the light?
+    log.debug "Contact is in ${evt.value} state"
+}
+
+/* Presense */  
+def myHandler(evt) {
+  if("present" == evt.value)
+    def message = "EyXAr Detected ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def presenceHandler(evt) {
+
+    if (evt.value == "present") {
+        log.debug "EyXAr ${evt.displayName} has arrived at the ${location}!"
+        sendPush("EyXAr ${evt.displayName} has arrived at the ${location}!")
+    } else if (evt.value == "not present") {
+
+        log.debug "EyXAr ${evt.displayName} has left the ${location}!"
+
+        sendPush("EyXAr ${evt.displayName} has left the ${location}!")
+
+    }
+}

smartapps/johnrucker/door-jammed-notification.src/door-jammed-notification.groovy

@@ -0,0 +1,66 @@
+/**
+ *  Door Jammed Notification
+ *
+ *  Copyright 2015 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Door Jammed Notification",
+    namespace: "JohnRucker",
+    author: "John.Rucker@Solar-current.com",
+    description: "Sends a SmartThings notification and text messages when your CoopBoss detects a door jam.",
+    category: "My Apps",
+    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
+    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
+    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
+
+preferences {
+    section("When the door state changes") {
+        paragraph "Send a SmartThings notification when the coop's door jammed and did not close."
+		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false            
+        input("recipients", "contact", title: "Recipients", description: "Send notifications to") {
+        	input "phone", "phone", title: "Phone number?", required: true}
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(doorSensor, "doorState", coopDoorStateHandler)
+}
+
+def coopDoorStateHandler(evt) {
+	if (evt.value == "jammed"){
+        def msg = "WARNING ${doorSensor.displayName} door is jammed and did not close!"
+        log.debug "WARNING ${doorSensor.displayName} door is jammed and did not close, texting $phone"
+
+        if (location.contactBookEnabled) {
+            sendNotificationToContacts(msg, recipients)
+        }
+        else {
+            sendPush(msg)
+            if (phone) {
+                sendSms(phone, msg)
+            }
+        }
+	}        
+}

smartapps/johnrucker/door-state-to-color-light-hue-bulb.src/door-state-to-color-light-hue-bulb.groovy

@@ -0,0 +1,141 @@
+/**
+ *  CoopBoss Door Status to color
+ *
+ *  Copyright 2015 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Door State to Color Light (Hue Bulb)",
+    namespace: "JohnRucker",
+    author: "John Rucker",
+    description: "Change the color of your Hue bulbs based on your coop's door status.",
+    category: "My Apps",
+    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
+    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
+    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
+
+
+preferences {
+	section("When the door opens/closese...") {
+    	paragraph "Sets a Hue bulb or bulbs to a color based on your coop's door status:\r  unknown = white\r  open = blue\r  opening = purple\r  closed = green\r  closing = pink\r  jammed = red\r  forced close = orange."
+		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false
+		input "bulbs", "capability.colorControl", title: "pick a bulb", required: true, multiple: true
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(doorSensor, "doorState", coopDoorStateHandler)
+}
+
+def coopDoorStateHandler(evt) {
+    log.debug "${evt.descriptionText}, $evt.value"
+	def color = "White"
+    def hueColor = 100
+    def saturation = 100
+    Map hClr = [:]
+    hClr.hex = "#FFFFFF"
+
+	switch(evt.value) {
+    	case "open":
+        	color = "Blue"
+            break;
+        case "opening":
+        	color = "Purple"
+            break;
+        case "closed":
+        	color = "Green"
+            break;
+    	case "closing":
+        	color = "Pink"
+            break;
+        case "jammed":
+        	color = "Red"
+            break;
+        case "forced close":
+        	color = "Orange"
+            break;
+        case "unknown":
+        	color = "White"
+            break;        
+    }   
+       
+	switch(color) {
+		case "White":
+			hueColor = 52
+			saturation = 19
+			break;
+		case "Daylight":
+			hueColor = 53
+			saturation = 91
+			break;
+		case "Soft White":
+			hueColor = 23
+			saturation = 56
+			break;
+		case "Warm White":
+			hueColor = 20
+			saturation = 80 //83
+			break;
+		case "Blue":
+			hueColor = 70
+            hClr.hex = "#0000FF"
+			break;
+		case "Green":
+			hueColor = 39
+            hClr.hex = "#00FF00"
+			break;
+		case "Yellow":
+			hueColor = 25
+            hClr.hex = "#FFFF00"            
+			break;
+		case "Orange":
+			hueColor = 10
+            hClr.hex = "#FF6000"
+			break;
+		case "Purple":
+			hueColor = 75
+            hClr.hex = "#BF7FBF"
+			break;
+		case "Pink":
+			hueColor = 83
+            hClr.hex = "#FF5F5F"
+			break;
+		case "Red":
+			hueColor = 100
+            hClr.hex = "#FF0000"
+			break;
+	}    
+    
+    //bulbs*.on()
+    bulbs*.setHue(hueColor)
+	bulbs*.setSaturation(saturation)   
+    bulbs*.setColor(hClr)
+    
+    //bulbs.each{
+    	//it.on()  // Turn the bulb on when open (this method does not come directly from the colorControl capability)
+    	//it.setLevel(100)  // Make sure the light brightness is 100%       
+    	//it.setHue(hueColor)
+		//it.setSaturation(saturation) 
+        //}        
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -60,7 +60,7 @@ def bridgeDiscovery(params=[:])
         app.updateSetting("selectedHue", "")
     }
 
-	subscribe(location, null, locationHandler, [filterEvents:false])
+	ssdpSubscribe()
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -152,6 +152,10 @@ private discoverBridges() {
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 
+void ssdpSubscribe() {
+	subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:basic:1", ssdpBridgeHandler)
+}
+
 private sendDeveloperReq() {
 	def token = app.id
     def host = getBridgeIP()
@@ -161,7 +165,7 @@ private sendDeveloperReq() {
 		headers: [
 			HOST: host
 		],
-		body: [devicetype: "$token-0"]], "${selectedHue}"))
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
@@ -171,7 +175,7 @@ private discoverHueBulbs() {
 		path: "/api/${state.username}/lights",
 		headers: [
 			HOST: host
-		]], "${selectedHue}"))
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
@@ -181,7 +185,7 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 		path: "/description.xml",
 		headers: [
 			HOST: host
-		]], deviceNetworkId))
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }
 
 private verifyHueBridges() {
@@ -289,17 +293,52 @@ def bulbListHandler(hub, data = "") {
         def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
             if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
+                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub]
         }
     }
     def bridge = null
-	if (selectedHue)
-        bridge = getChildDevice(selectedHue)
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+	}
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
 }
 
+private upgradeDeviceType(device, newHueType) {
+	def deviceType = getDeviceType(newHueType)
+
+	// Automatically change users Hue bulbs to correct device types
+	if (deviceType && !(device?.typeName?.equalsIgnoreCase(deviceType))) {
+		log.debug "Update device type: \"$device.label\" ${device?.typeName}->$deviceType"
+		device.setDeviceType(deviceType)
+	}
+}
+
+private getDeviceType(hueType) {
+	// Determine ST device type based on Hue classification of light
+	if (hueType?.equalsIgnoreCase("Dimmable light"))
+		return "Hue Lux Bulb"
+	else if (hueType?.equalsIgnoreCase("Extended Color Light"))
+		return "Hue Bulb"
+	else if (hueType?.equalsIgnoreCase("Color Light"))
+		return "Hue Bloom"
+	else
+		return null
+}
+
+private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
+	def deviceType = getDeviceType(hueType)
+
+	if (deviceType) {
+		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
+	}
+	else {
+		log.warn "Device type $hueType not supported"
+		return null
+	}
+}
+
 def addBulbs() {
 	def bulbs = getHueBulbs()
 	selectedBulbs?.each { dni ->
@@ -309,11 +348,7 @@ def addBulbs() {
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
                 if (newHueBulb != null) {
-                    if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") ) {
-                        d = addChildDevice("smartthings", "Hue Lux Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-                    } else {
-                        d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
-                    }
+                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
                     log.debug "created ${d.displayName} with id $dni"
                     d.refresh()
                 } else {
@@ -322,16 +357,15 @@ def addBulbs() {
 			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
-				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
+				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
                 d.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
+				// Update device type if incorrect
             	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-				if (newHueBulb?.value?.type?.equalsIgnoreCase("Dimmable light") && d.typeName == "Hue Bulb") {
-					d.setDeviceType("Hue Lux Bulb")
-				}
+				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
 	}
@@ -353,8 +387,9 @@ def addBridge() {
                     	def oldDNI = it.deviceNetworkId
                         log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                         it.setDeviceNetworkId("${newDNI}")
-                        if (oldDNI == selectedHue)
-                        	app.updateSetting("selectedHue", newDNI)
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
                         newbridge = false
                     }
                 }
@@ -383,6 +418,111 @@ def addBridge() {
 	}
 }
 
+def ssdpBridgeHandler(evt) {
+	def description = evt.description
+	log.trace "Location: $description"
+
+	def hub = evt?.hubId
+	def parsedEvent = parseLanMessage(description)
+	parsedEvent << ["hub":hub]
+
+	def bridges = getHueBridges()
+	log.trace bridges.toString()
+	if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
+		//bridge does not exist
+		log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
+		bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else {
+		// update the values
+		def ip = convertHexToIP(parsedEvent.networkAddress)
+		def port = convertHexToInt(parsedEvent.deviceAddress)
+		def host = ip + ":" + port
+		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
+		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+		def dni = "${parsedEvent.mac}"
+		def d = getChildDevice(dni)
+		def networkAddress = null
+		if (!d) {
+			childDevices.each {
+				if (it.getDeviceDataByName("mac")) {
+					def newDNI = "${it.getDeviceDataByName("mac")}"
+					if (newDNI != it.deviceNetworkId) {
+						def oldDNI = it.deviceNetworkId
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+						it.setDeviceNetworkId("${newDNI}")
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
+						doDeviceSync()
+					}
+				}
+			}
+		} else {
+			if (d.getDeviceDataByName("networkAddress")) {
+				networkAddress = d.getDeviceDataByName("networkAddress")
+			} else {
+				networkAddress = d.latestState('networkAddress').stringValue
+			}
+			log.trace "Host: $host - $networkAddress"
+			if (host != networkAddress) {
+				log.debug "Device's port or ip changed for device $d..."
+				dstate.ip = ip
+				dstate.port = port
+				dstate.name = "Philips hue ($ip)"
+				d.sendEvent(name:"networkAddress", value: host)
+				d.updateDataValue("networkAddress", host)
+			}
+		}
+	}
+}
+
+void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
+	log.trace "description.xml response (application/xml)"
+	def body = hubResponse.xml
+	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+		def bridges = getHueBridges()
+		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (bridge) {
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a bridge that didn't exist"
+		}
+	}
+}
+
+void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (!body?.state?.on) { //check if first time poll made it here by mistake
+			def bulbs = getHueBulbs()
+			log.debug "Adding bulbs to state!"
+			body.each { k, v ->
+				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
+			}
+		}
+	}
+}
+
+void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (body.success != null) {
+			if (body.success[0] != null) {
+				if (body.success[0].username)
+					state.username = body.success[0].username
+			}
+		} else if (body.error != null) {
+			//TODO: handle retries...
+			log.error "ERROR: application/json ${body.error}"
+		}
+	}
+}
+
+/**
+ * @deprecated This has been replaced by the combination of {@link #ssdpBridgeHandler()}, {@link #bridgeDescriptionHandler()},
+ * {@link #lightsHandler()}, and {@link #usernameHandler()}. After a pending event subscription migration, it can be removed.
+ */
+@Deprecated
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -418,17 +558,19 @@ def locationHandler(evt) {
                             def oldDNI = it.deviceNetworkId
                             log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                             it.setDeviceNetworkId("${newDNI}")
-                            if (oldDNI == selectedHue)
-                                app.updateSetting("selectedHue", newDNI)
+							if (oldDNI == selectedHue) {
+								app.updateSetting("selectedHue", newDNI)
+							}
                             doDeviceSync()
                         }
                     }
                 }
 			} else {
-            	if (d.getDeviceDataByName("networkAddress"))
-                	networkAddress = d.getDeviceDataByName("networkAddress")
-            	else
-                	networkAddress = d.latestState('networkAddress').stringValue
+				if (d.getDeviceDataByName("networkAddress")) {
+					networkAddress = d.getDeviceDataByName("networkAddress")
+				} else {
+					networkAddress = d.latestState('networkAddress').stringValue
+				}
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -461,8 +603,9 @@ def locationHandler(evt) {
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
-					if (body.success[0].username)
+					if (body.success[0].username) {
 						state.username = body.success[0].username
+					}
 				}
 			} else if (body.error != null) {
 				//TODO: handle retries...
@@ -473,7 +616,7 @@ def locationHandler(evt) {
 					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
 					body.each { k,v ->
-						bulbs[k] = [id: k, name: v.name, type: v.type, hub:parsedEvent.hub]
+						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
 					}
 				}
 			}
@@ -487,11 +630,7 @@ def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
 	convertBulbListToMap()
 	poll()
-    try {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-    } catch (all) {
-    	log.trace "Subscription already exist"
- 	}
+	ssdpSubscribe()
 	discoverBridges()
 }
 
@@ -685,7 +824,7 @@ def setColor(childDevice, huesettings) {
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transition = huesettings.transition ? huesettings.transition : 4
+    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
     // Make sure to turn off light if requested
     if (huesettings.switch == "off")
@@ -718,15 +857,11 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-    try {
-		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+	log.debug "GET: $host$uri"
+	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
-	} catch (all) {
-        log.warn "Parsing Body failed - trying again..."
-        doDeviceSync()
-    }
 }
 
 private put(path, body) {
@@ -836,7 +971,7 @@ def convertBulbListToMap() {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
 			state.bulbs.unique {it.id}.each { bulb ->
-				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "hub":bulb.hub]]
+				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub]]
 			}
 			state.bulbs = map
 		}

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -23,9 +23,9 @@
 '''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
 '''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
 '''Water Sensor Wet'''.ko=누수가 감지되었을 때
-'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
-'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
 '''Assign a name'''.ko=이름 설정
 '''Choose Modes'''.ko=상태 선택

smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy

@@ -0,0 +1,107 @@
+/**
+ *  Device Tile Controller
+ *
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Device Tile Controller",
+    namespace: "smartthings/tile-ux",
+    author: "SmartThings",
+    description: "A controller SmartApp to install virtual devices into your location in order to simulate various native Device Tiles.",
+    category: "SmartThings Internal",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    singleInstance: true)
+
+
+preferences {
+    // landing page
+    page(name: "defaultPage")
+}
+
+def defaultPage() {
+    dynamicPage(name: "defaultPage", install: true, uninstall: true) {
+        section {
+            paragraph "Select on Unselect the devices that you want to install"
+        }
+        section(title: "Multi Attribute Tile Types") {
+            input(type: "bool", name: "genericDeviceTile", title: "generic", description: "A device that showcases the various use of generic multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "lightingDeviceTile", title: "lighting", description: "A device that showcases the various use of lighting multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "thermostatDeviceTile", title: "thermostat", description: "A device that showcases the various use of thermostat multi-attribute-tiles.", defaultValue: "true")
+            input(type: "bool", name: "mediaPlayerDeviceTile", title: "media player", description: "A device that showcases the various use of mediaPlayer multi-attribute-tiles.", defaultValue: "false")
+            input(type: "bool", name: "videoPlayerDeviceTile", title: "video player", description: "A device that showcases the various use of videoPlayer multi-attribute-tiles.", defaultValue: "false")
+        }
+        section(title: "Device Tile Types") {
+            input(type: "bool", name: "standardDeviceTile", title: "standard device tiles", description: "A device that showcases the various use of standard device tiles.", defaultValue: "false")
+            input(type: "bool", name: "valueDeviceTile", title: "value device tiles", description: "A device that showcases the various use of value device tiles.", defaultValue: "false")
+            input(type: "bool", name: "presenceDeviceTile", title: "presence device tiles", description: "A device that showcases the various use of color control device tile.", defaultValue: "false")
+        }
+        section(title: "Other Tile Types") {
+            input(type: "bool", name: "carouselDeviceTile", title: "image carousel", description: "A device that showcases the various use of carousel device tile.", defaultValue: "false")
+            input(type: "bool", name: "sliderDeviceTile", title: "slider", description: "A device that showcases the various use of slider device tile.", defaultValue: "false")
+            input(type: "bool", name: "colorWheelDeviceTile", title: "color wheel", description: "A device that showcases the various use of color wheel device tile.", defaultValue: "false")
+        }
+    }
+}
+
+def installed() {
+    log.debug "Installed with settings: ${settings}"
+}
+
+def uninstalled() {
+    getChildDevices().each {
+        deleteChildDevice(it.deviceNetworkId)
+    }
+}
+
+def updated() {
+    log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initializeDevices()
+}
+
+def initializeDevices() {
+    settings.each { key, value ->
+        log.debug "$key : $value"
+        def existingDevice = getChildDevices().find { it.name == key }
+        log.debug "$existingDevice"
+        if (existingDevice && !value) {
+            deleteChildDevice(existingDevice.deviceNetworkId)
+        } else if (!existingDevice && value) {
+            String dni = UUID.randomUUID()
+            log.debug "$dni"
+            addChildDevice(app.namespace, key, dni, null, [
+                label: labelMap()[key] ?: key,
+                completedSetup: true
+            ])
+        }
+    }
+}
+
+// Map the name of the Device to a proper Label
+def labelMap() {
+    [
+        genericDeviceTile: "Tile Multiattribute Generic",
+        lightingDeviceTile: "Tile Multiattribute Lighting",
+        thermostatDeviceTile: "Tile Multiattribute Thermostat",
+        mediaPlayerDeviceTile: "Tile Multiattribute Media Player",
+        videoPlayerDeviceTile: "Tile Multiattribute Video Player",
+        standardDeviceTile: "Tile Device Standard",
+        valueDeviceTile: "Tile Device Value",
+        presenceDeviceTile: "Tile Device Presence",
+        carouselDeviceTile: "Tile Device Carousel",
+        sliderDeviceTile: "Tile Device Slider",
+        colorWheelDeviceTile: "Tile Device Color Wheel"
+    ]
+}

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -236,23 +236,22 @@ def addSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
-				"label": selectedSwitch?.value?.name ?: "Wemo Switch",
-				"data": [
-					"mac": selectedSwitch.value.mac,
-					"ip": selectedSwitch.value.ip,
-					"port": selectedSwitch.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedSwitch.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
+					"label": selectedSwitch?.value?.name ?: "Wemo Switch",
+					"data": [
+						"mac": selectedSwitch.value.mac,
+						"ip": selectedSwitch.value.ip,
+						"port": selectedSwitch.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }
@@ -267,23 +266,22 @@ def addMotions() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
-				"label": selectedMotion?.value?.name ?: "Wemo Motion",
-				"data": [
-					"mac": selectedMotion.value.mac,
-					"ip": selectedMotion.value.ip,
-					"port": selectedMotion.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedMotion.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
+					"label": selectedMotion?.value?.name ?: "Wemo Motion",
+					"data": [
+						"mac": selectedMotion.value.mac,
+						"ip": selectedMotion.value.ip,
+						"port": selectedMotion.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedMotion.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }
@@ -298,23 +296,22 @@ def addLightSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
-				"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
-				"data": [
-					"mac": selectedLightSwitch.value.mac,
-					"ip": selectedLightSwitch.value.ip,
-					"port": selectedLightSwitch.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "created ${d.displayName} with id $dni"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
+					"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
+					"data": [
+						"mac": selectedLightSwitch.value.mac,
+						"ip": selectedLightSwitch.value.ip,
+						"port": selectedLightSwitch.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "created ${d.displayName} with id $dni"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }