Modifying 'Updates to dynamic object execution for security compliance'

DVCSMP-1738 Philips HUE: Detail page showing the Brightness level twice

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.7"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
         mavenLocal()

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -0,0 +1,795 @@
+/**
+ *  CoopBoss H3Vx
+ *	02/29/16	Fixed app crash with Android by changing the syntax of default state in tile definition. 
+ *				Fixed null value errors during join process.  Added 3 new commands to refresh data.
+ *
+ *	01/18/16	Masked invalid temperature reporting when TempProbe1 is below 0C
+ *				Added setBaseCurrentNE, readBaseCurrentNE, commands as well as baseCurrentNE attribute.  
+ *
+ *  Copyright 2016 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *  Icon location = http://scripts.3dgo.net/smartthings/icons/
+ */
+metadata {
+	definition (name: "CoopBoss H3Vx", namespace: "JohnRucker", author: "John.Rucker@Solar-Current.com") {
+        capability "Refresh"
+        capability "Polling"
+        capability "Sensor"
+        capability "Actuator"
+        capability "Configuration"
+		capability "Temperature Measurement"   
+        capability "Door Control"
+  		capability "Switch"
+        
+        command "closeDoor"
+        command "closeDoorHiI"
+        command "openDoor"
+        command "autoCloseOn"
+        command "autoCloseOff"
+        command "autoOpenOn"
+        command "autoOpenOff"
+        command "setCloseLevelTo"
+        command "setOpenLevelTo" 
+        command "setSensitivityLevel"
+        command "Aux1On"
+        command "Aux1Off"        
+        command "Aux2On"
+        command "Aux2Off" 
+        command "updateTemp1"
+        command "updateTemp2"
+        command "updateSun"
+        command "setNewBaseCurrent"
+        command "setNewPhotoCalibration"
+        command "readNewPhotoCalibration"
+        command "readBaseCurrentNE"
+        command "setBaseCurrentNE"
+        command "updateSensitivity"
+        command "updateCloseLightLevel"
+        command "updateOpenLightLevel"
+
+        attribute "doorState","string"
+        attribute "currentLightLevel","number"
+        attribute "closeLightLevel","number"
+        attribute "openLightLevel","number"
+        attribute "autoCloseEnable","string" 
+        attribute "autoOpenEnable","string"
+        attribute "TempProb1","number"
+        attribute "TempProb2","number"   
+        attribute "dayOrNight","string"
+        attribute "doorSensitivity","number"
+        attribute "doorCurrent","number"  
+        attribute "doorVoltage","number"
+        attribute "Aux1","string"
+        attribute "Aux2","string"
+        attribute "coopStatus","string"
+        attribute "baseDoorCurrent","number"
+        attribute "photoCalibration","number"
+        attribute "baseCurrentNE","string"
+        
+    	fingerprint profileId: "0104", inClusters: "0000,0101,0402", manufacturer: "Solar-Current", model: "Coop Boss"
+    
+	}
+
+	// simulator metadata
+	simulator {
+    }
+    
+    
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffsetCoop", "number", title: "Coop Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		input "tempOffsetOutside", "number", title: "Outside Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false        
+	}    
+       
+
+	// UI tile definitions
+	tiles(scale: 2){        
+		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{  
+			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
+			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+			} 
+            tileAttribute ("device.coopStatus", key: "SECONDARY_CONTROL") {
+				attributeState "device.coopStatus", label:'${currentValue}'
+			}
+        }
+                     
+		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
+        	{
+      		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
+            attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
+            attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
+            attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
+            attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"
+            } 
+            tileAttribute ("device.doorState", key: "SECONDARY_CONTROL") {
+				attributeState "unknown", label: 'Door is in unknown state. Push to open.'
+                attributeState "open", label: 'Coop door is open. Push to close.'
+                attributeState "opening", label: 'Caution, door is opening!'
+                attributeState "closed", label: 'Coop door is closed. Push to open.'
+                attributeState "closing", label: 'Caution, door is closing!'
+                attributeState "jammed", label: 'Door open! Push for high-force close'
+                attributeState "forced close", label: "Door is closed. Push to open."
+                attributeState "fault", label: 'Door fault check electrical connection.'
+                attributeState "Sent", label: 'Command sent to CoopBoss...'
+			}                 
+    	}        
+        
+		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}    
+        
+		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
+		}            
+        
+		valueTile("TempProb1", "device.TempProb1", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Coop\r${currentValue}°', unit:"F", action:"updateTemp1"}         
+        
+		valueTile("TempProb2", "device.TempProb2", width: 2, height: 2, decoration: "flat"){
+        state "default", label:'Outside\r${currentValue}°', unit:"F", action:"updateTemp2"}        
+
+		valueTile("currentLevel", "device.currentLightLevel", width: 2, height: 2, decoration: "flat") {
+        state "default", label:'Sun\r${currentValue}', action:"updateSun"}    
+                
+        valueTile("dayOrNight", "device.dayOrNight", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'${currentValue}.'
+        }             
+                
+        controlTile("SetClSlider", "device.closeLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "closeLightLevel", action:"setCloseLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetClValue", "device.closeLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Close\nSunlight\n${currentValue}', action:'updateCloseLightLevel'
+        }        
+        
+        controlTile("SetOpSlider", "device.openLightLevel", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setOpenLevelTo", backgroundColor:"#d04e00"
+        }
+        
+        valueTile("SetOpValue", "device.openLightLevel", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Open\nSunlight\n${currentValue}', action:'updateOpenLightLevel'
+        } 
+        
+        controlTile("SetSensitivitySlider", "device.doorSensitivity", "slider", height: 2, width: 4, inactiveLabel: false, range:"(1..100)") {
+        state "openLightLevel", action:"setSensitivityLevel", backgroundColor:"#d04e00"
+        }        
+        
+        valueTile("SetSensitivityValue", "device.doorSensitivity", decoration: "flat",  inactiveLabel: false, width: 2, height: 2) {
+        state "default", label:'Door\nSensitivity\n${currentValue}', action:'updateSensitivity'
+        }          
+        
+        standardTile("refresh", "device.refresh", width: 2, height: 2, decoration: "flat", inactiveLabel: false) {
+		state "default", label:'All', action:"refresh.refresh", icon:"st.secondary.refresh-icon"
+		}   
+        
+		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
+		}        
+        
+		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
+		}            
+        
+		main "doorCtrl"
+		details (["dtlsDoorCtrl", "TempProb1", "TempProb2", "currentLevel", "autoClose", "autoOpen", "dayOrNight",
+        "SetClSlider", "SetClValue", "SetOpSlider", "SetOpValue", "SetSensitivitySlider", "SetSensitivityValue",
+        "aux1", "aux2", "refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events  def parse(String description) {
+def parse(String description) {
+	log.debug "description: $description"
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    log.debug map
+	//return map ? createEvent(map) : null
+    sendEvent(map)
+    callUpdateStatusTxt() 
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]    
+    def cluster = zigbee.parse(description)
+    log.debug cluster
+    if (cluster.clusterId == 0x0402) {
+        switch(cluster.sourceEndpoint) {
+
+            case 0x39:		// Endpoint 0x39 is the temperature of probe 1
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb1"
+            def celsius = Integer.valueOf(temp,16).shortValue()    
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+                celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)		
+                if (tempOffsetOutside) {
+                    def offset = tempOffsetOutside as int
+					resultMap.value = resultMap.value + offset
+                }                      
+            }
+            sendEvent(name: "temperature", value: resultMap.value, displayed: false)		// set the temperatureMeasurment capability to temperature
+            break
+
+            case 0x40:													// Endpoint 0x40 is the temperature of probe 2
+            String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+            resultMap.name = "TempProb2"
+            def celsius = Integer.valueOf(temp,16).shortValue() 									
+            //resultMap.descriptionText = "Prob2 celsius value = ${celsius}"
+            if (celsius ==  -32768){									// This number is used to indicate an error in the temperature reading
+                resultMap.value = "---"
+            }else{
+            	celsius = celsius / 100									// Temperature value is sent X 100.
+                resultMap.value = celsiusToFahrenheit(celsius)			
+                if (tempOffsetCoop) {
+                    def offset = tempOffsetCoop as int
+					resultMap.value = resultMap.value + offset
+                }                                                
+            }                           
+            break
+    	}                        
+	}
+    
+    if (cluster.clusterId == 0x0101 && cluster.command == 0x0b) {		// This is a default response to a command sent to cluster 0x0101 door control
+    	//log.debug "Default Response Data = $cluster.data"
+        switch(cluster.data) {
+        
+        case "[10, 0]":		// 0x0a turn auto close on command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "on"        
+        break                 
+        
+        case "[11, 0]":		// 0x0b turn auto close off command verified          
+        resultMap.name = "autoCloseEnable"
+        resultMap.value = "off"        
+        break            
+        
+        case "[12, 0]":		// 0x0C turn auto open on command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "on"        
+        break    
+        
+        case "[13, 0]":		// 0x0d turn auto open off command verified           
+        resultMap.name = "autoOpenEnable"
+        resultMap.value = "off"        
+        break               
+        
+        
+        case "[20, 0]":		// 0x14 Aux1 On command verified 
+        log.info "verified Aux1 On"
+    	sendEvent(name: "switch", value: "on", displayed: false)   
+        resultMap.name = "Aux1"
+        resultMap.value = "on"        
+        break
+
+        case "[21, 0]":		// 0x15 Aux1 Off command verified 
+        log.info "verified Aux1 Off"
+    	sendEvent(name: "switch", value: "off", displayed: false)
+        resultMap.name = "Aux1"
+        resultMap.value = "off"
+        break
+        
+        case "[22, 0]":		// 0x16 Aux2 On command verified 
+        log.info "verified Aux2 On"    
+        resultMap.name = "Aux2"
+        resultMap.value = "on"        
+        break
+
+        case "[23, 0]":		// 0x17 Aux2 Off command verified 
+        log.info "verified Aux2 Off"
+        resultMap.name = "Aux2"
+        resultMap.value = "off"        
+        break        
+        
+        }
+    }
+    return resultMap
+}
+
+private Map parseReportAttributeMessage(String description) {
+    Map resultMap = [:]
+    def descMap = parseDescriptionAsMap(description)
+    //log.debug "read attr descMap --> $descMap"
+    if (descMap.cluster == "0101" && descMap.attrId == "0003") {
+        resultMap.name = "doorState"
+        if (descMap.value == "00"){
+            resultMap.value = "unknown"
+            sendEvent(name: "door", value: "unknown", displayed: false)
+        }else if(descMap.value == "01"){
+            resultMap.value = "closed"
+            sendEvent(name: "door", value: "closed", displayed: false)            
+        }else if(descMap.value == "02"){
+            resultMap.value = "open"    
+            sendEvent(name: "door", value: "open", displayed: false)              
+        }else if(descMap.value == "03"){
+            resultMap.value = "jammed"     
+        }else if(descMap.value == "04"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "05"){
+            resultMap.value = "forced close"   
+        }else if(descMap.value == "06"){
+            resultMap.value = "closing"  
+            sendEvent(name: "door", value: "closing", displayed: false)              
+        }else if(descMap.value == "07"){
+            resultMap.value = "opening"
+            sendEvent(name: "door", value: "opening", displayed: false)                 
+        }else if(descMap.value == "08"){
+            resultMap.value = "fault"            
+        }else {            
+            resultMap.value = "unknown"
+        }   
+        resultMap.descriptionText = "Door State Changed to ${resultMap.value}"
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0400") { 
+        resultMap.name = "currentLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))      
+        resultMap.displayed = false
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0401") { 
+        resultMap.name = "closeLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0402") { 
+        resultMap.name = "openLightLevel"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0403") { 
+        resultMap.name = "autoCloseEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}       
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0404") { 
+        resultMap.name = "autoOpenEnable"
+        if (descMap.value == "01"){resultMap.value = "on"}
+        else{resultMap.value = "off"}  
+
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0405") { 
+        resultMap.name = "doorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001        
+
+     } else if (descMap.cluster == "0101" && descMap.attrId == "0408") { 
+        resultMap.name = "doorSensitivity"
+        resultMap.value = (100 - Integer.parseInt(descMap.value, 16))
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "0409") { 
+        resultMap.name = "baseDoorCurrent"
+        resultMap.value = (Integer.parseInt(descMap.value, 16)) 
+        resultMap.value = resultMap.value * 0.001                
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040a") { 
+        resultMap.name = "doorVoltage"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))  
+        resultMap.value = resultMap.value * 0.001
+        
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040b") { 
+        resultMap.name = "Aux1"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+    	sendEvent(name: "switch", value: "on", displayed: false)        
+        }else{
+        resultMap.value = "off"        
+    	sendEvent(name: "switch", value: "off", displayed: false)        
+        }
+     
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040c") { 
+        resultMap.name = "Aux2"
+        if(descMap.value == "01"){
+        resultMap.value = "on"
+        }else{
+        resultMap.value = "off"        
+        }   
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040d") { 
+        resultMap.name = "photoCalibration"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    } else if (descMap.cluster == "0101" && descMap.attrId == "040e") { 
+        resultMap.name = "baseCurrentNE"
+        resultMap.value = (Integer.parseInt(descMap.value, 16))           
+    }    
+    return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+    //log.info "ParseCustomMessage called with ${description}"
+	Map resultMap = [:]
+    if (description?.startsWith('temperature: ')) {
+        resultMap.name = "temperature"
+    	def rawT = (description - "temperature: ").trim()
+        resultMap.descriptionText = "Temperature celsius value = ${rawT}"
+        def rawTint = Float.parseFloat(rawT)
+        if (rawTint > 65){
+        	resultMap.name = null
+            resultMap.value = null
+            resultMap.descriptionText = "Temperature celsius value = ${rawT} is invalid not updating"
+            log.warn "Invalid temperature value detected! rawT = ${rawT}, description = ${description}"
+        }else if (rawT ==  -32768){											// This number is used to indicate an error in the temperature reading
+            resultMap.value = "ERR"
+        }else{
+            resultMap.value = celsiusToFahrenheit(rawT.toFloat()) as Float
+            sendEvent(name: "TempProb1", value: resultMap.value, displayed: false)		// Workaround for lack of access to endpoint information for Temperature report  
+        }        
+	}
+    resultMap.displayed = false
+    log.info "Temperature reported = ${resultMap.value}"
+    return resultMap    
+}
+
+def parseDescriptionAsMap(description) {
+    (description - "read attr - ").split(",").inject([:]) { map, param ->
+        def nameAndValue = param.split(":")
+        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+    }
+}
+
+// Added for Temeperature parse
+def getFahrenheit(value) {
+	def celsius = Integer.parseInt(value, 16)
+	return celsiusToFahrenheit(celsius) as Integer
+}
+
+// Private methods
+def callUpdateStatusTxt(){	
+	def cTemp = device.currentState("TempProb1")?.value
+    def cLight = 0
+    def testNull = device.currentState("currentLightLevel")?.value
+    if (testNull != null){
+    cLight = device.currentState("currentLightLevel")?.value as int
+    }   
+	updateStatusTxt(cTemp, cLight)
+}
+
+def updateStatusTxt(currentTemp, currentLight){
+	//log.info "called updateStatusTxt with ${currentTemp}, ${currentLight}"
+    def cTmp = currentTemp
+    def cLL = 10
+    def oLL = 10
+    
+    def testNull = device.currentState("closeLightLevel")?.value
+    if (testNull != null){
+    	cLL = device.currentState("closeLightLevel")?.value as int
+	}
+
+    testNull = device.currentState("openLightLevel")?.value
+    if (testNull != null){
+    	oLL = device.currentState("openLightLevel")?.value as int
+    }   
+    
+    def aOpnEn = device.currentState("autoOpenEnable")?.value
+    def aClsEn = device.currentState("autoCloseEnable")?.value
+    
+        if (currentLight < cLL){  
+        	if (aOpnEn == "on"){
+           		sendEvent(name: "dayOrNight", value: "Sun must be > ${oLL} to auto open", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} open at ${oLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Open is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto open off. Coop ${cTmp}°", displayed: false)                
+                }
+        }else { 
+        	if (aClsEn == "on"){        
+            	sendEvent(name: "dayOrNight", value: "Sun must be < ${cLL} to auto close", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} close at ${cLL}. Coop ${cTmp}°", displayed: false)
+                }else{
+           		sendEvent(name: "dayOrNight", value: "Auto Close is turned off.", displayed: false)
+            	sendEvent(name: "coopStatus", value: "Sunlight ${currentLight} auto close off. Coop ${cTmp}°", displayed: false)                   
+                }
+        }
+}
+
+// Commands to device
+def on() {
+	log.debug "on calling Aux1On"
+    Aux1On()
+}
+
+def off() {
+	log.debug "off calling Aux1Off"
+    Aux1Off()
+}
+
+def close() {
+	log.debug "close calling closeDoor"
+	closeDoor()
+}
+
+def open() {
+	log.debug "open calling openDoor"
+	openDoor()
+}
+
+def Aux1On(){
+	log.debug "Sending Aux1 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x14 {}"             
+}
+
+def Aux1Off(){     
+	log.debug "Sending Aux1 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x15 {}"             
+}
+
+def Aux2On(){
+	log.debug "Sending Aux2 = on command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x16 {}"             
+}
+
+def Aux2Off(){
+	log.debug "Sending Aux2 = off command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x17 {}"             
+}
+
+def openDoor() {
+	log.debug "Sending Open command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x1 {}"
+}
+
+def closeDoor() {
+	log.debug "Sending Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0 {}"
+}
+
+def closeDoorHiI() {
+	log.debug "Sending High Current Close command"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x4 {}"
+}
+
+def autoOpenOn() {
+	log.debug "Setting Auto Open On"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0C {}"
+}
+
+def autoOpenOff() {
+	log.debug "Setting Auto Open Off"   
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0D {}"
+}
+
+def autoCloseOn() {
+	log.debug "Setting Auto Close On"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0A {}"
+}
+
+def autoCloseOff() {
+	log.debug "Setting Auto Close Off"
+	"st cmd 0x${device.deviceNetworkId} 0x38 0x0101 0x0B {}"
+}
+
+def setOpenLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Open Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x402"											// Read light value   
+    cmd    
+}
+
+def setCloseLevelTo(cValue) {
+	def cX = cValue
+	log.debug "Setting Close Light Level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401 0x23 {${Integer.toHexString(cX)}}"	
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x401"											// Read light value   
+    cmd 
+    
+}
+
+def setSensitivityLevel(cValue) {
+	def cX = 100 - cValue
+	log.debug "Setting Door sensitivity level to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value. 
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x408"											// Read attribute 
+    cmd    
+}
+
+def setNewBaseCurrent(cValue) {
+	def cX = cValue as int
+	log.info "Setting new BaseCurrent to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit integer value.
+    cmd << "delay 150"
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"											// Read attribute 
+    cmd    
+}
+
+def setNewPhotoCalibration(cValue) {
+	def cX = cValue as int
+	log.info "Setting new Photoresister calibration to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D 0x2B {${Integer.toHexString(cX)}}"		// Write attribute.  0x2B is a 32 bit signed integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readNewPhotoCalibration() {
+	log.info "Requesting current Photoresister calibration "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40D"											// Read attribute 
+    cmd    
+}
+
+def readBaseCurrentNE() {
+	log.info "Requesting base current never exceed setting "
+    
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def setBaseCurrentNE(cValue) {
+	def cX = cValue as int
+	log.info "Setting new base Current Never Exceed to ${cX} Hex = 0x${Integer.toHexString(cX)}"
+    
+    def cmd = []
+    cmd << "st wattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E 0x23 {${Integer.toHexString(cX)}}"		// Write attribute.  0x23 is a 32 bit unsigned integer value. 
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x40E"											// Read attribute 
+    cmd    
+}
+
+def poll(){
+	log.debug "Polling Device"
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read probe 1 Temperature 
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read probe 2 Temperature        
+    
+    cmd
+}
+
+def updateTemp1() {
+	log.debug "Sending attribute read request for Temperature Probe1"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd
+}
+
+def updateTemp2() {
+	log.debug "Sending attribute read request for Temperature Probe2"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2   
+    cmd
+}
+
+
+def updateSun() {
+	log.debug "Sending attribute read request for Sun Light Level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd
+}
+
+def updateSensitivity() {
+	log.debug "Sending attribute read request for door sensitivity"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"	// Read Door sensitivity
+    cmd
+}
+
+def updateCloseLightLevel() {
+	log.debug "Sending attribute read close light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	
+    cmd
+}
+
+def updateOpenLightLevel() {
+	log.debug "Sending attribute read open light level"   
+    def cmd = []    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	
+    cmd
+}
+
+def refresh() {
+	log.debug "sending refresh command"   
+    def cmd = []
+	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0003"   // Read Door State 
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0400"	// Read Current Light Level
+    cmd << "delay 150"        
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0401"	// Read Door Close Light Level
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0402"	// Read Door Open Light Level
+    cmd << "delay 150"
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0403"	// Read Auto Door Close Settings 
+    cmd << "delay 150"    
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0404"	// Read Auto Door Open Settings
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x39 0x0402 0x0000"    // Read Current Temperature from Coop Probe 1
+    cmd << "delay 150" 
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0408"    // Object detection sensitivity 
+    cmd << "delay 150"  
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x40 0x0402 0x0000"    // Read Current Temperature from Coop Probe 2    
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x0405"    // Current required to close door      
+    cmd << "delay 150"   
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040B"    // Aux1 Status      
+    cmd << "delay 150"       
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x040C"    // Aux2 Status      
+    cmd << "delay 150"     
+    
+    cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0101 0x409"		// Read Base current
+
+    cmd
+}
+
+def configure() {
+    log.debug "Binding SEP 0x38 DEP 0x01 Cluster 0x0101 Lock cluster to hub"  
+    log.debug "Binding SEP 0x39 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    log.debug "Binding SEP 0x40 DEP 0x01 Cluster 0x0402 Temperature cluster to hub"      
+    
+    def cmd = []
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x38 0x01 0x0101 {${device.zigbeeId}} {}"			// Bind to end point 0x38 and the lock cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x39 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x39 and the temperature cluster
+    cmd << "delay 150"
+    cmd << "zdo bind 0x${device.deviceNetworkId} 0x40 0x01 0x0402 {${device.zigbeeId}} {}"    		// Bind to end point 0x40 and the temperature cluster
+    cmd << "delay 1500"    
+    
+    log.info "Sending ZigBee Configuration Commands to Coop Control"
+    return cmd + refresh()
+}
+
+

devicetypes/smartthings/aeon-home-energy-meter-c3.src/aeon-home-energy-meter-c3.groovy

@@ -94,11 +94,11 @@ def parse(String description) {
 	def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
+		log.debug "Parse returned ${result?.descriptionText}"
+		storeGraphData(result.name, result.value)
+	} else {
+		log.debug "zwave.parse returned null command. Cannot create event"
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-
-	storeGraphData(result.name, result.value)
-
 	return result
 }
 

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,16 +12,6 @@
  *
  */
  
- /*
- *  Purpose: Arrival Sensor HA DTH File
- *
- *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
- *
- *  Change History:
- *  1. 20160115 TW - Update/Edit to support i18n translations
- *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
- */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,25 +11,16 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: Arrival Sensor HA i18n Translation File
-#
-# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160115 TW Initial release with informal Korean translation.
-#	2. 20160121 TW Added def preference section titles.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
-'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Presence timeout (minutes)'''.ko=알람 유예 시간 설정 (분)
 '''Tap to set'''.ko=눌러서 설정
 '''Arrival Sensor'''.ko=도착알림 센서
 '''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events / Notifications
-'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}의 남은 배터리 {{ value }}
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
 #==============================================================================

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,17 +13,19 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+//@Deprecated: Moved to ZLL Dimmer Bulb
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
+        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
 
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+        //fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
 
     // simulator metadata
@@ -88,6 +90,10 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,6 +53,8 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -29,17 +29,14 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -38,9 +38,6 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -25,17 +25,14 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
-              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
-              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
-			}
         }
 
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -12,21 +11,12 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
-#==============================================================================
-# Purpose: Mobile Presence i18n Translation File
-#
-# Filename: mobile-presence.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160205 TW Initial release with informal Korean translation.
-#	2. 20160224 TW Updated with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
-'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }} 외출
+'''{{ linkText }} has arrived'''.ko={{ linkText }} 귀가
 '''present'''.ko=집안
 '''not present'''.ko=외출

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,14 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
-===============================================================================
- *  Purpose: Mobile Presence DTH File
- *
- *  Filename: mobile-presence.src/mobile-presence.groovy
- *
- *  Change History:
- *  1. 20160205 TW - Update/Edit to support i18n translations
-===============================================================================
  */
  
 metadata {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,6 +24,7 @@ metadata {
         command "enrollResponse"
  
  
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,24 +11,16 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartPower Outlet i18n Translation File
-#
-# Filename: SmartPower-Outlet.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Outlet'''.ko=플러그
+'''Give your device a name'''.ko=기기 이름 설정
+'''Outlet'''.ko= 스마트 플러그 
 # Events descriptionText
-'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
-'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
-'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
-'''On'''.ko=켜짐
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }} 켜짐
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }} 꺼짐
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전력은 {{ value }}와트입니다.
+'''On'''.ko= 켜짐
 '''Off'''.ko=꺼짐
-'''Turning On'''.ko=켜기
-'''Turning Off'''.ko=끄기
+'''Turning On'''.ko=켜는 중
+'''Turning Off'''.ko=끄는 중
 #==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,8 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartPower Outlet DTH File
- *
- *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
-===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -31,6 +23,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"
@@ -136,6 +129,7 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Moisture Sensor i18n Translation File
-#
-# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Dry'''.ko=건조
@@ -31,14 +22,14 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Water Leak Sensor'''.ko=누수센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Water Leak Sensor'''.ko=누수감지 센서
 '''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Moisture Sensor DTH File
- *
- *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -31,6 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -320,6 +311,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Motion Sensor i18n Translation File
-#
-# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리
@@ -28,16 +18,16 @@
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Give your device a name'''.ko=기기 이름 설정
 '''Motion Sensor'''.ko=모션 센서
-'''motion'''.ko=동작 감지
+'''motion'''.ko= 동작 감지 
 '''no motion'''.ko=동작 없음
 '''${currentValue}% battery'''.ko=${currentValue}% 배터리
 # Events descriptionText
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}에서 움직임이 감지되었습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}에서 움직임이 중단되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Motion Sensor DTH File
- *
- *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -31,6 +21,7 @@ metadata {
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -332,6 +323,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Multi Sensor i18n Translation File
-#
-# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160117 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예
@@ -31,20 +22,20 @@
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Multipurpose Sensor'''.ko=멀티 센서
+'''Give your device a name'''.ko=기기 이름 설정
+'''Multipurpose Sensor'''.ko=문 및 창 센서
 # Events descriptionText
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}에서 열림이 감지되었습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}에서 닫힘이 감지되었습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }} 활성화
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }} 비활성화
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}에서 {{ value }}°C 감지
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}의 남은 배터리 {{ value }}%
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Inactive'''.ko=비활성
-'''Active'''.ko=활성
-'''Open'''.ko=열림
+'''Inactive'''.ko=비활성 상태
+'''Active'''.ko=활성 상태
+'''Open'''.ko= 열림이 감지될 때
 '''Closed'''.ko=닫힘
 '''${currentValue}% battery'''.ko=${currentValue}% 배터리

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Multi Sensor DTH File
- *
- *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -35,6 +25,7 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
+		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
@@ -450,6 +441,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -23,8 +23,9 @@
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
+		capability "Health Check"
 
+		command "enrollResponse"
  	}
 
  	simulator {
@@ -299,6 +300,7 @@ def getTemperature(value) {
 	}
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -251,6 +252,7 @@ def refresh()
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -80,19 +80,31 @@ metadata {
 			state "default", label:''
 		}
 
-		main("standard1")
+		// multi-line text (explicit newlines)
+		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
+			state "default", label: '${currentValue}'
+		}
+
+		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
+		}
+
+		main("actionRings")
 		details([
 			"actionRings", "actionFlat", "noActionFlat",
 
 			"flatLabel", "flatIconLabel", "flatIcon",
 
 			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+
+			"multiLine", "multiLineWithIcon"
 		])
 	}
 }
 
 def installed() {
 	sendEvent(name: "switch", value: "off")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -69,16 +69,25 @@ metadata {
 			]
 		}
 
-		valueTile("noValue", "device.nada", width: 2, height: 2) {
+		valueTile("noValue", "device.nada", width: 4, height: 2) {
 			state "default", label:'${currentValue}'
 		}
 
+		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
+			state "default", label: '${currentValue}'
+		}
+
+		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
+		}
+
 		main("text")
 		details([
 			"text", "longText", "integer", 
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
-            "bgColorRangeConflict", "noValue"
+            "bgColorRangeConflict", "noValue",
+            "multiLine", "multiLineWithIcon"
 		])
 	}
 }
@@ -90,6 +99,7 @@ def installed() {
 	sendEvent(name: "integerFloat", value: 47.0)
 	sendEvent(name: "pi", value: 3.14159)
 	sendEvent(name: "floatAsText", value: "3.14159")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -67,17 +67,50 @@ metadata {
 				attributeState "VALUE_DOWN", action: "levelDown"
 			}
 		}
+		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
+			}
+		}
+		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
+			}
+		}
+		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+		}
+		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+		}
 
 		main(["basicTile"])
-		details(["basicTile", "sliderTile", "valueTile"])
+		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
 	}
 }
 
 def installed() {
-
+	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
+	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse() {
+def parse(String description) {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -33,7 +33,7 @@ metadata {
 			state "power", label: '${currentValue} W'
 		}
 
-		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: "www.wattvision.com" , url: '${currentValue}', width: 3, height: 2)
+		htmlTile(name: "powerContent", attribute: "powerContent", type: "HTML", whitelist: ["www.wattvision.com"] , url: '${currentValue}', width: 3, height: 2)
 
 		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
 			state "default", label: '', action: "refresh.refresh", icon: "st.secondary.refresh"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -22,10 +25,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-  
+
 Custom Commands:
   setAdjustedColor
-    
+
 */
 
 metadata {
@@ -41,7 +44,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -0,0 +1,101 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        sendEvent(resultMap)
+    }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def poll() {
+    refresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -0,0 +1,150 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Control"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
+    }
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        log.trace "zigbeeMap : $zigbeeMap"
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+        }
+    }
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def refresh() {
+    refreshAttributes() + configureAttributes()
+}
+
+def poll() {
+    refreshAttributes()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -25,7 +25,10 @@ metadata {
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -240,7 +243,7 @@ def batteryGetCommand() {
 def retypeBasedOnMSR() {
 	switch (state.MSR) {
 		case "0086-0002-002D":
-			log.debug("Changing device type to Z-Wave Water Sensor")
+			log.debug "Changing device type to Z-Wave Water Sensor"
 			setDeviceType("Z-Wave Water Sensor")
 			break
 		case "011F-0001-0001":  // Schlage motion
@@ -249,9 +252,16 @@ def retypeBasedOnMSR() {
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug("Changing device type to Z-Wave Motion Sensor")
+			log.debug "Changing device type to Z-Wave Motion Sensor"
 			setDeviceType("Z-Wave Motion Sensor")
 			break
-		
+		case "013C-0002-000D":  // Philio multi +
+			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
+			setDeviceType("3-in-1 Multisensor Plus (SG)")
+			break
+		case "0109-2001-0106":  // Vision door/window
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
+			setDeviceType("Door / Window Sensor Plus (SG)")
+			break
 	}
 }

smartapps/johnrucker/door-jammed-notification.src/door-jammed-notification.groovy

@@ -0,0 +1,66 @@
+/**
+ *  Door Jammed Notification
+ *
+ *  Copyright 2015 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Door Jammed Notification",
+    namespace: "JohnRucker",
+    author: "John.Rucker@Solar-current.com",
+    description: "Sends a SmartThings notification and text messages when your CoopBoss detects a door jam.",
+    category: "My Apps",
+    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
+    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
+    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
+
+preferences {
+    section("When the door state changes") {
+        paragraph "Send a SmartThings notification when the coop's door jammed and did not close."
+		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false            
+        input("recipients", "contact", title: "Recipients", description: "Send notifications to") {
+        	input "phone", "phone", title: "Phone number?", required: true}
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(doorSensor, "doorState", coopDoorStateHandler)
+}
+
+def coopDoorStateHandler(evt) {
+	if (evt.value == "jammed"){
+        def msg = "WARNING ${doorSensor.displayName} door is jammed and did not close!"
+        log.debug "WARNING ${doorSensor.displayName} door is jammed and did not close, texting $phone"
+
+        if (location.contactBookEnabled) {
+            sendNotificationToContacts(msg, recipients)
+        }
+        else {
+            sendPush(msg)
+            if (phone) {
+                sendSms(phone, msg)
+            }
+        }
+	}        
+}

smartapps/johnrucker/door-state-to-color-light-hue-bulb.src/door-state-to-color-light-hue-bulb.groovy

@@ -0,0 +1,141 @@
+/**
+ *  CoopBoss Door Status to color
+ *
+ *  Copyright 2015 John Rucker
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+definition(
+    name: "Door State to Color Light (Hue Bulb)",
+    namespace: "JohnRucker",
+    author: "John Rucker",
+    description: "Change the color of your Hue bulbs based on your coop's door status.",
+    category: "My Apps",
+    iconUrl: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo.png",
+    iconX2Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo2x.png",
+    iconX3Url: "http://coopboss.com/images/SmartThingsIcons/coopbossLogo3x.png")
+
+
+preferences {
+	section("When the door opens/closese...") {
+    	paragraph "Sets a Hue bulb or bulbs to a color based on your coop's door status:\r  unknown = white\r  open = blue\r  opening = purple\r  closed = green\r  closing = pink\r  jammed = red\r  forced close = orange."
+		input "doorSensor", "capability.doorControl", title: "Select CoopBoss", required: true, multiple: false
+		input "bulbs", "capability.colorControl", title: "pick a bulb", required: true, multiple: true
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(doorSensor, "doorState", coopDoorStateHandler)
+}
+
+def coopDoorStateHandler(evt) {
+    log.debug "${evt.descriptionText}, $evt.value"
+	def color = "White"
+    def hueColor = 100
+    def saturation = 100
+    Map hClr = [:]
+    hClr.hex = "#FFFFFF"
+
+	switch(evt.value) {
+    	case "open":
+        	color = "Blue"
+            break;
+        case "opening":
+        	color = "Purple"
+            break;
+        case "closed":
+        	color = "Green"
+            break;
+    	case "closing":
+        	color = "Pink"
+            break;
+        case "jammed":
+        	color = "Red"
+            break;
+        case "forced close":
+        	color = "Orange"
+            break;
+        case "unknown":
+        	color = "White"
+            break;        
+    }   
+       
+	switch(color) {
+		case "White":
+			hueColor = 52
+			saturation = 19
+			break;
+		case "Daylight":
+			hueColor = 53
+			saturation = 91
+			break;
+		case "Soft White":
+			hueColor = 23
+			saturation = 56
+			break;
+		case "Warm White":
+			hueColor = 20
+			saturation = 80 //83
+			break;
+		case "Blue":
+			hueColor = 70
+            hClr.hex = "#0000FF"
+			break;
+		case "Green":
+			hueColor = 39
+            hClr.hex = "#00FF00"
+			break;
+		case "Yellow":
+			hueColor = 25
+            hClr.hex = "#FFFF00"            
+			break;
+		case "Orange":
+			hueColor = 10
+            hClr.hex = "#FF6000"
+			break;
+		case "Purple":
+			hueColor = 75
+            hClr.hex = "#BF7FBF"
+			break;
+		case "Pink":
+			hueColor = 83
+            hClr.hex = "#FF5F5F"
+			break;
+		case "Red":
+			hueColor = 100
+            hClr.hex = "#FF0000"
+			break;
+	}    
+    
+    //bulbs*.on()
+    bulbs*.setHue(hueColor)
+	bulbs*.setSaturation(saturation)   
+    bulbs*.setColor(hClr)
+    
+    //bulbs.each{
+    	//it.on()  // Turn the bulb on when open (this method does not come directly from the colorControl capability)
+    	//it.setLevel(100)  // Make sure the light brightness is 100%       
+    	//it.setHue(hueColor)
+		//it.setSaturation(saturation) 
+        //}        
+}

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -0,0 +1,345 @@
+/**
+ *  SmartThings service for Prempoint
+ *
+ *  Author: Prempoint Inc. (c) 2016
+ *   
+ */
+definition(
+    name: "Prempoint",
+    namespace: "prempoint.com",
+    author: "Prempoint Inc.",
+    description: "SmartThings service for Prempoint",
+    category: "Connections",
+    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
+    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
+    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
+    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
+
+preferences {
+	section("Allow Prempoint to Control & Access These Things...") {
+		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
+        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/list") {
+		action: [
+			GET: "listDevices"
+		]
+	}
+	path("/switches") {
+		action: [
+			GET: "listSwitches"
+		]
+	}
+	path("/switches/:id") {
+		action: [
+			GET: "showSwitch"
+		]
+	}
+    path("/switches/:id/:command") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/switches/:id/:command/:level") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/locks") {
+		action: [
+			GET: "listLocks"
+		]
+	}
+	path("/locks/:id") {
+		action: [
+			GET: "showLock"
+		]
+	}
+	path("/locks/:id/:command") {
+		action: [
+			GET: "updateLock"
+		]
+	}
+    path("/doors/:id") {
+		action: [
+			GET: "showDoor"
+		]
+	}
+   	path("/doors/:id/:command") {
+		action: [
+			GET: "updateDoor"
+		]
+	}
+	path("/garagedoors/:id") {
+		action: [
+			GET: "showGarageDoor"
+		]
+	}
+   	path("/garagedoors/:id/:command") {
+		action: [
+			GET: "updateGarageDoor"
+		]
+	}
+    path("/cameras/:id") {
+		action: [
+			GET: "showCamera"
+		]
+	}  
+    path("/cameras/:id/:command") {
+		action: [
+			GET: "updateCamera"
+		]
+	}  
+}
+
+def installed() {}
+
+def updated() {}
+
+def listDevices() {
+	log.debug "entering listDevices"
+    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
+    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
+}
+
+//switches
+def listSwitches() {
+    log.debug "entering listSwitches"
+	switches.collect{showDevice(it,"switch")}
+}
+
+def showSwitch() {
+	log.debug "entering showSwitches"
+	show(switches, "switch")
+}
+
+def updateSwitch() {
+	log.debug "entering updateSwitches"
+	update(switches, "switch")
+}
+
+//locks
+def listLocks() {
+	log.debug "entering listLocks"
+	locks.collect{showDevice(it,"lock")}
+}
+
+def showLock() {
+	log.debug "entering showLock"
+	show(locks, "lock")
+}
+
+def updateLock() {
+	log.debug "entering updateLock"
+	update(locks, "lock")
+}
+
+//doors
+def listDoors() {
+	log.debug "entering listDoors"
+	locks.collect{showDevice(it,"door")}
+}
+
+def showDoor() {
+	log.debug "entering showDoors"
+	show(doors, "door")
+}
+
+def updateDoor() {
+	log.debug "entering updateDoor"
+	update(doors, "door")
+}
+
+//garagedoors
+def listGarageDoors() {
+	log.debug "entering listGarageDoors"
+	locks.collect{showDevice(it,"garagedoor")}
+}
+
+def showGarageDoor() {
+	log.debug "entering showGarageDoors"
+	show(garagedoors, "garagedoor")
+}
+
+def updateGarageDoor() {
+	log.debug "entering updateGarageDoor"
+	update(gargedoors, "garagedoor")
+}
+
+//cameras
+def listCameras() {
+	log.debug "entering listCameras"
+	cameras.collect{showDevice(it,"image")}
+}
+
+def showCamera() {
+	log.debug "entering showCameras"
+	show(cameras, "camera")
+}
+
+def updateCamera() {
+	log.debug "entering updateCamera"
+	update(cameras, "camera")
+}
+
+def deviceHandler(evt) {}
+
+private update(devices, type) {
+	def rc = null
+
+	//def command = request.JSON?.command
+    def command = params.command
+    
+    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
+    
+    // Process the command.
+	if (command) 
+    {
+		def dev = devices.find { it.id == params.id }
+		if (!dev) {
+			httpError(404, "Device not found: $params.id")
+		} else if (type == "switch") {
+			switch(command) {
+			    case "on":
+			    	rc = dev.on()
+			    	break
+			    case "off":
+			    	rc = dev.off()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "lock") {
+			switch(command) {
+			    case "lock":
+			    	rc = dev.lock()
+			    	break
+			    case "unlock":
+			    	rc = dev.unlock()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
+			}
+		} else if (type == "door") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "garagedoor") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "camera") {
+			switch(command) {
+			    case "take":
+			    	rc = dev.take()
+			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		}
+
+		log.debug "executed device=$it.id $dev command=$command rc=$rc"
+        
+        // Check that the device is a switch that is currently on, supports 'setLevel"
+        // and that a level was specified.
+        int level = params.level ? params.level as int : -1;
+        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
+            log.debug "device about to setLevel=$level"
+            dev.setLevel(level);
+        }
+        
+        // Show the device info if necessary.
+        if (rc == null) {
+        	rc = showDevice(dev, type)
+        }
+	}
+    
+    return rc
+}
+
+private show(devices, type) {
+	def dev = devices.find { it.id == params.id }
+	if (!dev) {
+		httpError(404, "Device not found")
+	} else { 
+        // Show the device info.
+        showDevice(dev, type)
+	}
+}
+
+private showDevice(it, type) {
+	def props = null
+
+	// Get the current state for the device type.
+	def state = [it.currentState(type)]
+    
+	// Check that whether the a switch device with level support is located and update the returned device type.
+    def devType =  type
+    
+    if (type == "switch" && hasLevel(it)) {
+    	// Assign "switchWithLevel" to device type.
+    	devType = "switchWithLevel"
+        // Add the level state.
+        def levelState = it.currentState("level")
+        if (levelState) {
+        	state.add(levelState)
+        }
+    }
+    
+    log.debug "device label=$it.label type=$devType"
+    
+    // Assign the device item properties if appropriate.
+    if (it) {
+    	props = [id: it.id, label: it.label, type: devType, state: state]
+        // Add the hub information to the device properties
+        // if appropriate.
+        if (it.hub) {
+        	props.put("location", it.hub.hub.location)
+        }
+        if (it.currentImage) {
+        	props.put("currentImage", it.currentImage)
+        }
+    }
+    
+    return props
+}
+
+private hasLevel(device) {
+    // Default return value.
+    def rc = false;
+
+	// Get the device supported commands.
+    def supportedCommands = device.supportedCommands
+    
+    // Check to see if the "setLevel" was found and assign
+    // the appropriate return value.
+    if (supportedCommands) {
+        // Find the "setLevel" command. 
+        rc = supportedCommands.toString().indexOf("setLevel") != -1
+    }
+    
+    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
+            
+    return rc
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -60,7 +60,7 @@ def bridgeDiscovery(params=[:])
         app.updateSetting("selectedHue", "")
     }
 
-	subscribe(location, null, locationHandler, [filterEvents:false])
+	ssdpSubscribe()
 
 	//bridge discovery request every 15 //25 seconds
 	if((bridgeRefreshCount % 5) == 0) {
@@ -152,6 +152,10 @@ private discoverBridges() {
 	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:basic:1", physicalgraph.device.Protocol.LAN))
 }
 
+void ssdpSubscribe() {
+	subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:basic:1", ssdpBridgeHandler)
+}
+
 private sendDeveloperReq() {
 	def token = app.id
     def host = getBridgeIP()
@@ -161,7 +165,7 @@ private sendDeveloperReq() {
 		headers: [
 			HOST: host
 		],
-		body: [devicetype: "$token-0"]], "${selectedHue}"))
+		body: [devicetype: "$token-0"]], "${selectedHue}", [callback: "usernameHandler"]))
 }
 
 private discoverHueBulbs() {
@@ -171,7 +175,7 @@ private discoverHueBulbs() {
 		path: "/api/${state.username}/lights",
 		headers: [
 			HOST: host
-		]], "${selectedHue}"))
+		]], "${selectedHue}", [callback: "lightsHandler"]))
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
@@ -181,7 +185,7 @@ private verifyHueBridge(String deviceNetworkId, String host) {
 		path: "/description.xml",
 		headers: [
 			HOST: host
-		]], deviceNetworkId))
+		]], deviceNetworkId, [callback: "bridgeDescriptionHandler"]))
 }
 
 private verifyHueBridges() {
@@ -293,8 +297,9 @@ def bulbListHandler(hub, data = "") {
         }
     }
     def bridge = null
-	if (selectedHue)
-        bridge = getChildDevice(selectedHue)
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+	}
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
@@ -327,8 +332,7 @@ private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
 
 	if (deviceType) {
 		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
-	}
-	else {
+	} else {
 		log.warn "Device type $hueType not supported"
 		return null
 	}
@@ -344,8 +348,10 @@ def addBulbs() {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
                 if (newHueBulb != null) {
                     d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                    log.debug "created ${d.displayName} with id $dni"
-                    d.refresh()
+					if (d) {
+						log.debug "created ${d.displayName} with id $dni"
+						d.refresh()
+					}
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -353,7 +359,7 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                d.refresh()
+				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
@@ -382,8 +388,9 @@ def addBridge() {
                     	def oldDNI = it.deviceNetworkId
                         log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                         it.setDeviceNetworkId("${newDNI}")
-                        if (oldDNI == selectedHue)
-                        	app.updateSetting("selectedHue", newDNI)
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
                         newbridge = false
                     }
                 }
@@ -412,6 +419,111 @@ def addBridge() {
 	}
 }
 
+def ssdpBridgeHandler(evt) {
+	def description = evt.description
+	log.trace "Location: $description"
+
+	def hub = evt?.hubId
+	def parsedEvent = parseLanMessage(description)
+	parsedEvent << ["hub":hub]
+
+	def bridges = getHueBridges()
+	log.trace bridges.toString()
+	if (!(bridges."${parsedEvent.ssdpUSN.toString()}")) {
+		//bridge does not exist
+		log.trace "Adding bridge ${parsedEvent.ssdpUSN}"
+		bridges << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else {
+		// update the values
+		def ip = convertHexToIP(parsedEvent.networkAddress)
+		def port = convertHexToInt(parsedEvent.deviceAddress)
+		def host = ip + ":" + port
+		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
+		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
+		def dni = "${parsedEvent.mac}"
+		def d = getChildDevice(dni)
+		def networkAddress = null
+		if (!d) {
+			childDevices.each {
+				if (it.getDeviceDataByName("mac")) {
+					def newDNI = "${it.getDeviceDataByName("mac")}"
+					if (newDNI != it.deviceNetworkId) {
+						def oldDNI = it.deviceNetworkId
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+						it.setDeviceNetworkId("${newDNI}")
+						if (oldDNI == selectedHue) {
+							app.updateSetting("selectedHue", newDNI)
+						}
+						doDeviceSync()
+					}
+				}
+			}
+		} else {
+			if (d.getDeviceDataByName("networkAddress")) {
+				networkAddress = d.getDeviceDataByName("networkAddress")
+			} else {
+				networkAddress = d.latestState('networkAddress').stringValue
+			}
+			log.trace "Host: $host - $networkAddress"
+			if (host != networkAddress) {
+				log.debug "Device's port or ip changed for device $d..."
+				dstate.ip = ip
+				dstate.port = port
+				dstate.name = "Philips hue ($ip)"
+				d.sendEvent(name:"networkAddress", value: host)
+				d.updateDataValue("networkAddress", host)
+			}
+		}
+	}
+}
+
+void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
+	log.trace "description.xml response (application/xml)"
+	def body = hubResponse.xml
+	if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
+		def bridges = getHueBridges()
+		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (bridge) {
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a bridge that didn't exist"
+		}
+	}
+}
+
+void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (!body?.state?.on) { //check if first time poll made it here by mistake
+			def bulbs = getHueBulbs()
+			log.debug "Adding bulbs to state!"
+			body.each { k, v ->
+				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
+			}
+		}
+	}
+}
+
+void usernameHandler(physicalgraph.device.HubResponse hubResponse) {
+	if (isValidSource(hubResponse.mac)) {
+		def body = hubResponse.json
+		if (body.success != null) {
+			if (body.success[0] != null) {
+				if (body.success[0].username)
+					state.username = body.success[0].username
+			}
+		} else if (body.error != null) {
+			//TODO: handle retries...
+			log.error "ERROR: application/json ${body.error}"
+		}
+	}
+}
+
+/**
+ * @deprecated This has been replaced by the combination of {@link #ssdpBridgeHandler()}, {@link #bridgeDescriptionHandler()},
+ * {@link #lightsHandler()}, and {@link #usernameHandler()}. After a pending event subscription migration, it can be removed.
+ */
+@Deprecated
 def locationHandler(evt) {
 	def description = evt.description
     log.trace "Location: $description"
@@ -447,17 +559,19 @@ def locationHandler(evt) {
                             def oldDNI = it.deviceNetworkId
                             log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
                             it.setDeviceNetworkId("${newDNI}")
-                            if (oldDNI == selectedHue)
-                                app.updateSetting("selectedHue", newDNI)
+							if (oldDNI == selectedHue) {
+								app.updateSetting("selectedHue", newDNI)
+							}
                             doDeviceSync()
                         }
                     }
                 }
 			} else {
-            	if (d.getDeviceDataByName("networkAddress"))
-                	networkAddress = d.getDeviceDataByName("networkAddress")
-            	else
-                	networkAddress = d.latestState('networkAddress').stringValue
+				if (d.getDeviceDataByName("networkAddress")) {
+					networkAddress = d.getDeviceDataByName("networkAddress")
+				} else {
+					networkAddress = d.latestState('networkAddress').stringValue
+				}
                 log.trace "Host: $host - $networkAddress"
                 if(host != networkAddress) {
                     log.debug "Device's port or ip changed for device $d..."
@@ -490,8 +604,9 @@ def locationHandler(evt) {
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
 				if (body.success[0] != null) {
-					if (body.success[0].username)
+					if (body.success[0].username) {
 						state.username = body.success[0].username
+					}
 				}
 			} else if (body.error != null) {
 				//TODO: handle retries...
@@ -516,11 +631,7 @@ def doDeviceSync(){
 	log.trace "Doing Hue Device Sync!"
 	convertBulbListToMap()
 	poll()
-    try {
-		subscribe(location, null, locationHandler, [filterEvents:false])
-    } catch (all) {
-    	log.trace "Subscription already exist"
- 	}
+	ssdpSubscribe()
 	discoverBridges()
 }
 
@@ -714,7 +825,7 @@ def setColor(childDevice, huesettings) {
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transition = huesettings.transition ? huesettings.transition : 4
+    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
     // Make sure to turn off light if requested
     if (huesettings.switch == "off")
@@ -747,15 +858,11 @@ private getId(childDevice) {
 private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
-    try {
-		sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
+	log.debug "GET: $host$uri"
+	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
 
 """, physicalgraph.device.Protocol.LAN, selectedHue))
-	} catch (all) {
-        log.warn "Parsing Body failed - trying again..."
-        doDeviceSync()
-    }
 }
 
 private put(path, body) {

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -131,19 +131,69 @@ def update() {
 	def type = params.deviceType
 	def data = request.JSON
 	def devices = settings[type]
+	def device = settings[type]?.find { it.id == params.id }
 	def command = data.command
 
 	log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-	if (command) {
-		def device = devices?.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	
+	if (!device) {
+		httpError(404, "Device not found")
+	} 
+	
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
 	}
 }
 
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "alarms":
+			return "Alarm"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+
 def show() {
 	def type = params.deviceType
 	def devices = settings[type]

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -23,9 +23,9 @@
 '''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
 '''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
 '''Water Sensor Wet'''.ko=누수가 감지되었을 때
-'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
-'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
-'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ location.name }}에 {{ triggerEvent.linkText }} 귀가
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ location.name }}에서 {{ triggerEvent.linkText }} 외출
 '''Assign a name'''.ko=이름 설정
 '''Choose Modes'''.ko=상태 선택

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -236,23 +236,22 @@ def addSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
-				"label": selectedSwitch?.value?.name ?: "Wemo Switch",
-				"data": [
-					"mac": selectedSwitch.value.mac,
-					"ip": selectedSwitch.value.ip,
-					"port": selectedSwitch.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedSwitch.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
+					"label": selectedSwitch?.value?.name ?: "Wemo Switch",
+					"data": [
+						"mac": selectedSwitch.value.mac,
+						"ip": selectedSwitch.value.ip,
+						"port": selectedSwitch.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }
@@ -267,23 +266,22 @@ def addMotions() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
-				"label": selectedMotion?.value?.name ?: "Wemo Motion",
-				"data": [
-					"mac": selectedMotion.value.mac,
-					"ip": selectedMotion.value.ip,
-					"port": selectedMotion.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedMotion.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
+					"label": selectedMotion?.value?.name ?: "Wemo Motion",
+					"data": [
+						"mac": selectedMotion.value.mac,
+						"ip": selectedMotion.value.ip,
+						"port": selectedMotion.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedMotion.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }
@@ -298,23 +296,22 @@ def addLightSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
 			}
-		}
-
-		if (!d) {
-			log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
-			d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
-				"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
-				"data": [
-					"mac": selectedLightSwitch.value.mac,
-					"ip": selectedLightSwitch.value.ip,
-					"port": selectedLightSwitch.value.port
-				]
-			])
-			def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			log.debug "created ${d.displayName} with id $dni"
-		} else {
-			log.debug "found ${d.displayName} with id $dni already exists"
+			if (!d) {
+				log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
+				d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
+					"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
+					"data": [
+						"mac": selectedLightSwitch.value.mac,
+						"ip": selectedLightSwitch.value.ip,
+						"port": selectedLightSwitch.value.port
+					]
+				])
+				def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+				log.debug "created ${d.displayName} with id $dni"
+			} else {
+				log.debug "found ${d.displayName} with id $dni already exists"
+			}
 		}
 	}
 }