MSA-1254: Device Handler for Fibaro Swipe ZW5

Gestures are advertised through "button" event - valid values are: "Up", "Down", "Left", "Right"; additionally number of flicks is available in event's data ("flicks"; valid values are: "single", "double").

devicetypes/fibargroup/fibaro-swipe-zw5.src/fibaro-swipe-zw5.groovy

@@ -0,0 +1,224 @@
+/**
+ *  Fibaro Swipe ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Swipe ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+    	capability "Actuator"
+		capability "Battery"
+        capability "Button"
+		capability "Configuration"
+		capability "Sensor"
+
+        fingerprint deviceId: "0x1801", inClusters: "0x5E, 0x85, 0x59, 0x80, 0x5B, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x73, 0x98, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		standardTile("button", "device.button", width: 2, height: 2) {
+			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+		}
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+            state "battery", label:'${currentValue}% battery', unit:"%"
+        }
+		main "button"
+		details(["button", "battery"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGGC failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x5A: 1, 0x5B: 1, 0x72: 2, 0x80: 1, 0x84: 2, 0x86: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x5A: 1, 0x5B: 1, 0x84: 2])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {    
+	if (!state.seqNumber || state.seqNumber != cmd.sequenceNumber) {
+    	def sceneNumberMapping = [1: "Up", 2: "Down", 3: "Left", 4: "Right"]
+    	def keyAttributesMapping = [0: "single", 3: "double"]
+
+    	log.debug "Central Scene Notification received: sequenceNumber: ${cmd.sequenceNumber}, sceneNumber: ${cmd.sceneNumber}, keyAttributes: ${cmd.keyAttributes}"
+
+		state.seqNumber = cmd.sequenceNumber	
+
+		return gestureEvent(sceneNumberMapping.get(cmd.sceneNumber.intValue()), keyAttributesMapping.get(cmd.keyAttributes.intValue()))
+    } else {
+    	log.debug "Same Central Scene Notification received multiple times: sequenceNumber: ${cmd.sequenceNumber}, sceneNumber: ${cmd.sceneNumber}, keyAttributes: ${cmd.keyAttributes}"
+    }
+    
+    state.seqNumber = cmd.sequenceNumber	
+}
+
+def gestureEvent(gesture, keyAttribute) {
+    return createEvent(name: "button", value: "${gesture}", data: [flicks: "${keyAttribute}"], descriptionText: "${device.displayName} gesture ${gesture}(${keyAttribute})", isStateChange: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
+        log.debug("Device has been configured sending >> batteryGet()")
+        cmds << encap(zwave.batteryV1.batteryGet())
+        cmds << "delay 1200"
+    }
+     
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+    //Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = now()
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+// handle commands
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+
+    cmds += zwave.manufacturerSpecificV1.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    //set parameter 12 to 0 to enable double flicks for gestures 1-4
+    cmds += zwave.configurationV1.configurationSet(parameterNumber: 12, size: 1, scaledConfigurationValue: 0)
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid:zwaveHubNodeId)//FGGC's default wake up interval
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+        
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x5A, 0x5B, 0x70, 0x84, 0x85, 0x8E]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -14,6 +14,7 @@
  *
  */
 
+//@Deprecated: Moved to ZLL Dimmer Bulb
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
@@ -24,7 +25,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
 
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+        //fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
 
     // simulator metadata

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -138,7 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -129,7 +129,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -311,8 +311,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -323,8 +323,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -441,8 +441,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -300,7 +300,6 @@ def getTemperature(value) {
 	}
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -252,7 +252,6 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -110,7 +110,7 @@ def installed() {
 	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse(String description) {
+def parse() {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -22,9 +22,8 @@ metadata {
         capability "Switch"
         capability "Switch Level"
 
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -95,17 +95,11 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+	if (state.manufacturer != cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
 }
 
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
     else {
     	if(people){
         	//don't turn off lights if anyone is home
-        	if(someoneIsHome){
+        	if(someoneIsHome()){
         	    log.debug("Stopping Check for Light")
         	    unschedule()
         	}