MSA-1254: Device Handler for Fibaro Swipe ZW5

Gestures are advertised through "button" event - valid values are: "Up", "Down", "Left", "Right"; additionally number of flicks is available in event's data ("flicks"; valid values are: "single", "double").
2026-03-09 05:11:52 +00:00 · 2016-05-06 06:20:07 -05:00
47 changed files with 818 additions and 1904 deletions
--- a/devicetypes/fibargroup/fibaro-swipe-zw5.src/fibaro-swipe-zw5.groovy
+++ b/devicetypes/fibargroup/fibaro-swipe-zw5.src/fibaro-swipe-zw5.groovy
@@ -0,0 +1,224 @@
+/**
+ *  Fibaro Swipe ZW5
+ *
+ *  Copyright 2016 Fibar Group S.A.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Swipe ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+    	capability "Actuator"
+		capability "Battery"
+        capability "Button"
+		capability "Configuration"
+		capability "Sensor"
+
+        fingerprint deviceId: "0x1801", inClusters: "0x5E, 0x85, 0x59, 0x80, 0x5B, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x73, 0x98, 0x86, 0x84", outClusters: ""
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		standardTile("button", "device.button", width: 2, height: 2) {
+			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+		}
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+            state "battery", label:'${currentValue}% battery', unit:"%"
+        }
+		main "button"
+		details(["button", "battery"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			result = createEvent(descriptionText:description, displayed:false)
+		} else {
+			result = createEvent(
+				descriptionText: "FGGC failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				displayed: true,
+			)
+		}
+	} else if (description == "updated") {
+		return null
+	} else {
+    	def cmd = zwave.parse(description, [0x5A: 1, 0x5B: 1, 0x72: 2, 0x80: 1, 0x84: 2, 0x86: 1])
+    
+    	if (cmd) {
+    		log.debug "Parsed '${cmd}'"
+        	zwaveEvent(cmd)
+    	}
+    }
+
+}
+
+//security
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x5A: 1, 0x5B: 1, 0x84: 2])
+	if (encapsulatedCommand) {
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+//crc16
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
+{
+    def versions = [0x72: 2, 0x80: 1, 0x86: 1]
+	def version = versions[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (!encapsulatedCommand) {
+		log.debug "Could not extract command from $cmd"
+	} else {
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.centralscenev1.CentralSceneNotification cmd) {    
+	if (!state.seqNumber || state.seqNumber != cmd.sequenceNumber) {
+    	def sceneNumberMapping = [1: "Up", 2: "Down", 3: "Left", 4: "Right"]
+    	def keyAttributesMapping = [0: "single", 3: "double"]
+
+    	log.debug "Central Scene Notification received: sequenceNumber: ${cmd.sequenceNumber}, sceneNumber: ${cmd.sceneNumber}, keyAttributes: ${cmd.keyAttributes}"
+
+		state.seqNumber = cmd.sequenceNumber	
+
+		return gestureEvent(sceneNumberMapping.get(cmd.sceneNumber.intValue()), keyAttributesMapping.get(cmd.keyAttributes.intValue()))
+    } else {
+    	log.debug "Same Central Scene Notification received multiple times: sequenceNumber: ${cmd.sequenceNumber}, sceneNumber: ${cmd.sceneNumber}, keyAttributes: ${cmd.keyAttributes}"
+    }
+    
+    state.seqNumber = cmd.sequenceNumber	
+}
+
+def gestureEvent(gesture, keyAttribute) {
+    return createEvent(name: "button", value: "${gesture}", data: [flicks: "${keyAttribute}"], descriptionText: "${device.displayName} gesture ${gesture}(${keyAttribute})", isStateChange: true)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "productId:        ${cmd.productId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
+	log.debug "deviceIdData:                ${cmd.deviceIdData}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+		String serialNumber = "h'"
+        
+        cmd.deviceIdData.each{ data ->
+        	serialNumber += "${String.format("%02X", data)}"
+        }
+        
+        updateDataValue("serialNumber", serialNumber)
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
+    def cmds = []
+    if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
+        log.debug("Device has been configured sending >> batteryGet()")
+        cmds << encap(zwave.batteryV1.batteryGet())
+        cmds << "delay 1200"
+    }
+     
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [:]
+	map.name = "battery"
+	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
+	map.unit = "%"
+	map.displayed = true
+    //Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
+    state.lastbatt = now()
+	createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
+	log.info "${device.displayName}: received command: $cmd - device has reset itself"
+}
+
+// handle commands
+def configure() {
+	log.debug "Executing 'configure'"
+	
+    def cmds = []
+
+    cmds += zwave.manufacturerSpecificV1.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    //set parameter 12 to 0 to enable double flicks for gestures 1-4
+    cmds += zwave.configurationV1.configurationSet(parameterNumber: 12, size: 1, scaledConfigurationValue: 0)
+    cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid:zwaveHubNodeId)//FGGC's default wake up interval
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId])
+        
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+    
+    encapSequence(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crc16(physicalgraph.zwave.Command cmd) {
+	//zwave.crc16encapV1.crc16Encap().encapsulate(cmd).format()
+    "5601${cmd.format()}0000"
+}
+
+private encapSequence(commands, delay=200) {
+	delayBetween(commands.collect{ encap(it) }, delay)
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	def secureClasses = [0x5A, 0x5B, 0x70, 0x84, 0x85, 0x8E]
+
+	//todo: check if secure inclusion was successful
+    //if not do not send security-encapsulated command
+	if (secureClasses.find{ it == cmd.commandClassId }) {
+    	secure(cmd)
+    } else {
+    	crc16(cmd)
+    }
+}
--- a/devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy
+++ b/devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy
@@ -14,6 +14,7 @@
 *
 */

+//@Deprecated: Moved to ZLL Dimmer Bulb
 metadata {
    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {

@@ -24,7 +25,7 @@ metadata {
        capability "Switch"
        capability "Switch Level"

-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+        //fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
    }

    // simulator metadata
--- a/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
+++ b/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
@@ -138,7 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }

--- a/devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy
@@ -21,7 +21,6 @@ metadata {
        attribute "tamper", "enum", ["detected", "clear"]
        attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint mfr:"010F", prod:"0C02", model:"1002"
    }
    simulator {
        //battery
--- a/devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy
+++ b/devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy
@@ -37,6 +37,9 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
--- a/devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy
+++ b/devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy
@@ -38,6 +38,9 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
--- a/devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy
+++ b/devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy
@@ -33,6 +33,9 @@ metadata {
            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
        }

        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
--- a/devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy
+++ b/devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy
@@ -1,110 +0,0 @@
-/**
- *  Hue White Ambiance Bulb
- *
- *  Philips Hue Type "Color Temperature Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-    // Automatically generated. Make future change here.
-    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch Level"
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Switch"
-        capability "Refresh"
-
-        command "refresh"
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles (scale: 2){
-        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["rich-control"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "parse() - $description"
-    def results = []
-
-    def map = description
-    if (description instanceof String)  {
-        log.debug "Hue Ambience Bulb stringToMap - ${map}"
-        map = stringToMap(description)
-    }
-
-    if (map?.name && map?.value) {
-        results << createEvent(name: "${map?.name}", value: "${map?.value}")
-    }
-    results
-}
-
-// handle commands
-void on() {
-    log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-    log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "$percent is not 0-100"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-
--- a/devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy
+++ b/devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy
@@ -19,6 +19,11 @@ metadata {
        capability "Sensor"

        attribute "colorName", "string"
+
+        // indicates that device keeps track of heartbeat (in state.heartbeat)
+        attribute "heartbeat", "string"
+        
+
    }

    // simulator metadata
@@ -70,6 +75,9 @@ metadata {
 def parse(String description) {
    //log.trace description

+    // save heartbeat (i.e. last time we got a message from device)
+    state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
    if (description?.startsWith("catchall:")) {
        if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
        {
@@ -124,6 +132,7 @@ def off() {
 }

 def refresh() {
+    sendEvent(name: "heartbeat", value: "alive", displayed:false)
    [
            "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
            "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
--- a/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
+++ b/devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy
@@ -16,7 +16,7 @@

 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -25,6 +25,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"

+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"
+
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
@@ -78,6 +81,9 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"

+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
 	def finalResult = zigbee.getKnownDescription(description)

 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -118,11 +124,11 @@ def on() {
 }

 def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
 	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }

--- a/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy
@@ -15,7 +15,7 @@
 */

 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -311,8 +311,6 @@ def refresh() {
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore
@@ -1,2 +0,0 @@
-.st-ignore
-README.md
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/README.md
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/README.md
@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-
--- a/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy
@@ -15,7 +15,7 @@
 */

 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -323,8 +323,6 @@ def refresh() {
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -15,7 +15,7 @@
 */

 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {

 		capability "Three Axis"
 		capability "Battery"
@@ -403,37 +403,76 @@ def refresh() {

 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}

 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]

 	return refreshCmds + enrollResponse()
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"

-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]

 	return configCmds + refresh()
 }
--- a/devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy
@@ -16,7 +16,7 @@
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH

 metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -300,7 +300,6 @@ def getTemperature(value) {
 	}

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)

 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
--- a/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy
@@ -15,13 +15,12 @@
 */
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
        
 		command "enrollResponse"
 
@@ -274,8 +273,7 @@ def refresh() {
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-	
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
--- a/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy
@@ -14,7 +14,7 @@
 *
 */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -252,7 +252,6 @@ def refresh()
 }

 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)

 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [
--- a/devicetypes/smartthings/tile-ux/README.md
+++ b/devicetypes/smartthings/tile-ux/README.md
@@ -1,42 +0,0 @@
-# Device Tiles Examples and Reference
-
-This package contains examples of Device tiles, organized by tile type.
-
-## Purpose
-
-Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
-
-The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
-
-## Installation
-
-1. Self-publish the Device Handlers in this package.
-2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
-3. Install the SmartApp from the Marketplace, under "My Apps".
-4. Select the simulated devices you want to install and press "Done".
-
-The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
-You may wish to create a new room for these simulated devices for easy access.
-
-## Usage
-
-Each simulated device can be interacted with like other devices.
-You can use the mobile app to interact with the tiles to see how they look and behave.
-
-## Troubleshooting
-
-If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
-Also check live logging to see if there is a specific tile that is causing installation issues.
-
-## FAQ
-
-*Question: A tile isn't behaving as expected. What should I do?*
-
-QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
-
-Developers may file a support ticket, and reference the specific tile and issue observed.
-
-*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
-
-We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
-That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.
--- a/devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy
@@ -22,7 +22,7 @@ metadata {

 	tiles(scale: 2) {
 		valueTile("currentColor", "device.color") {
-			state "color", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}

 		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
@@ -41,13 +41,6 @@ def parse(String description) {
 	log.debug "Parsing '${description}'"
 }

-def setColor(value) {
-	log.debug "setting color: $value"
-    if (value.hex) { sendEvent(name: "color", value: value.hex) }
-    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
-    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
-}
-
 def setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	sendEvent(name: "saturation", value: percent)
--- a/devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy
@@ -39,7 +39,7 @@ metadata {
 		}

 		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
-			state "range", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {
--- a/devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy
@@ -41,17 +41,17 @@ metadata {

 		// standard flat tile with only a label
 		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
 		}

 		// standard flat tile with icon and label
 		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
 		}

 		// standard flat tile with only icon (Refreh text is IN the icon file)
 		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		// standard with defaultState = true
@@ -74,19 +74,19 @@ metadata {

 		// utility tiles to fill the spaces
 		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
-			state "emptySmall", label:'', defaultState: true
+			state "default", label:''
 		}
 		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
-			state "emptyBigger", label:'', defaultState: true
+			state "default", label:''
 		}

 		// multi-line text (explicit newlines)
 		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
-			state "multiLine", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}

 		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
-			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}

 		main("actionRings")
--- a/devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy
@@ -22,68 +22,68 @@ metadata {

 	tiles(scale: 2) {
 		valueTile("text", "device.text", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("longText", "device.longText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("integer", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("pi", "device.pi", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("bgColor", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
+			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
 		}

 		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#ff0000"],
 				[value: 90, color: "#0000ff"]
 			]
 		}

 		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#333333"]
 			]
 		}

 		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
-			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#990000"],
 				[value: 10, color: "#000099"]
 			]
 		}

 		valueTile("noValue", "device.nada", width: 4, height: 2) {
-			state "noval", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}

 		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}

 		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}

 		main("text")
 		details([
-			"text", "longText", "integer",
+			"text", "longText", "integer", 
            "integerFloat", "pi", "floatAsText",
            "bgColor", "bgColorRange", "bgColorRangeSingleItem",
            "bgColorRangeConflict", "noValue",
--- a/devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy
@@ -39,15 +39,15 @@ metadata {
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
+				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
 			}
 			tileAttribute("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", defaultState: true
+				attributeState "default", action:"switch level.setLevel"
 			}
 		}
 		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
-				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
+				attributeState "default", label:'${currentValue}', backgroundColors:[
 					[value: 0, color: "#ff0000"],
 					[value: 20, color: "#ffff00"],
 					[value: 40, color: "#00ff00"],
@@ -69,34 +69,34 @@ metadata {
 		}
 		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}
 		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}

@@ -110,7 +110,7 @@ def installed() {
 	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }

-def parse(String description) {
+def parse() {
 	// This is a simulated device. No incoming data to parse.
 }

--- a/devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy
@@ -96,10 +96,10 @@ metadata {
 		}

 		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		main(["switch"])
@@ -173,6 +173,7 @@ def setColor(value) {
 def reset() {
 	log.debug "Executing 'reset'"
 	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+	//parent.poll()
 }

 def setAdjustedColor(value) {
@@ -188,6 +189,7 @@ def setAdjustedColor(value) {

 def refresh() {
 	log.debug "Executing 'refresh'"
+	//parent.manualRefresh()
 }

 def adjustOutgoingHue(percent) {
@@ -206,3 +208,4 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
+
--- a/devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy
@@ -37,10 +37,10 @@ metadata {
 				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
 			}
 			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
-				attributeState("status", action:"music Player.previousTrack", defaultState: true)
+				attributeState("default", action:"music Player.previousTrack")
 			}
 			tileAttribute("device.status", key: "NEXT_TRACK") {
-				attributeState("status", action:"music Player.nextTrack", defaultState: true)
+				attributeState("default", action:"music Player.nextTrack")
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState("level", action:"music Player.setLevel")
@@ -50,7 +50,7 @@ metadata {
 				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
 			}
 			tileAttribute("device.trackDescription", key: "MARQUEE") {
-				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
+				attributeState("default", label:"${currentValue}")
 			}
 		}

--- a/devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy
+++ b/devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy
@@ -32,14 +32,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
 				attributeState("VALUE_DOWN", action: "tempDown")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
+				attributeState("default", label:'${currentValue}%', unit:"%")
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
@@ -53,16 +53,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("temp", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
@@ -80,16 +79,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
+				attributeState("default", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -120,30 +118,30 @@ metadata {
 			)
 		}
 		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempDown", label:'down', action:"tempDown", defaultState: true
+			state "default", label:'down', action:"tempDown"
 		}
 		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempUp", label:'up', action:"tempUp", defaultState: true
+			state "default", label:'up', action:"tempUp"
 		}

 		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
 		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatDown", label:'down', action:"heatDown", defaultState: true
+			state "default", label:'down', action:"heatDown"
 		}
 		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatUp", label:'up', action:"heatUp", defaultState: true
+			state "default", label:'up', action:"heatUp"
 		}

 		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
 		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolDown", label:'down', action:"coolDown", defaultState: true
+			state "default", label:'down', action:"coolDown"
 		}
 		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolUp", label:'up', action:"coolUp", defaultState: true
+			state "default", label:'up', action:"coolUp"
 		}

 		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
--- a/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
+++ b/devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy
@@ -22,9 +22,8 @@ metadata {
        capability "Switch"
        capability "Switch Level"

-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
--- a/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy
@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}

 	// simulator metadata
@@ -80,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -93,9 +94,9 @@ def updated() {
 }

 def configure() {
-	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
+	delayBetween([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+		batteryGetCommand()
 	], 6000)
 }

@@ -146,11 +147,12 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -168,13 +170,14 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
+		cmds << batteryGetCommand()
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
 	[event, response(cmds)]
 }
@@ -209,7 +212,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
+			result << response(batteryGetCommand())
 		}
 	}

@@ -217,7 +220,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }

 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -229,16 +232,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }

-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 1) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
+def batteryGetCommand() {
+	def cmd = zwave.batteryV1.batteryGet()
+	if (state.sec) {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
 	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
+	cmd.format()
 }

 def retypeBasedOnMSR() {
@@ -261,12 +260,8 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
+			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
 	}
 }
--- a/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
+++ b/devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy
@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}

 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }

--- a/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
+++ b/devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy
@@ -1,270 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
-		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-			}
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main (["contact"])
-		details(["contact","battery"])
-	}
-
-	simulator {
-		// messages the device returns in response to commands it receives
-		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
-		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
-		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
-		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
-		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
-		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
-		status "wake up" : "command: 9881, payload: 00 84 07"
-		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
-		status "battery low" : "command: 9881, payload: 00 80 03 FF"
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x84: 2,  // WakeUp
-		0x86: 1,  // Version
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
-	} else {
-		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if (!device.currentState("ManufacturerCode")) {
-				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			}
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-		}
-	} else if (cmd.notificationType) {
-		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}
--- a/devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy
+++ b/devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy
@@ -1,327 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-				
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
-		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles {
-		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:"%"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery"])
-	}
-}
-
-def updated() {
-	if (!device.currentState("ManufacturerCode")) {
-		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x31: 5,  // SensorMultilevel
-		0x84: 2	  // WakeUp
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	def result = []
-	if (value) {
-		log.debug "sensorValueEvent($value) : active"
-		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
-	} else {
-		log.debug "sensorValueEvent($value) : inactive"
-		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x08) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0xFF) {
-			result << sensorValueEvent(1)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def result = []
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			break;
-		case 3:
-			map.name = "illuminance"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			break;
-		case 5:
-			map.name = "humidity"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = cmd.scale == 0 ? "%" : ""
-			break;
-		case 0x1E:
-			map.name = "loudness"
-			map.unit = cmd.scale == 1 ? "dBA" : "dB"
-			map.value = cmd.scaledSensorValue.toString()
-			break;
-		default:
-			map.descriptionText = cmd.toString()
-	}
-	result << createEvent(map)
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-	
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	if (manufacturerCode == "0109" && productTypeCode == "2002") {
-		result << response(secureSequence([
-			// Change re-trigger duration to 1 minute
-			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
-			zwave.batteryV1.batteryGet(),
-			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-		], 400))
-	}
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}
--- a/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
+++ b/devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy
@@ -95,17 +95,11 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }

 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+	if (state.manufacturer != cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
 }

-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]
--- a/smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy
+++ b/smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy
@@ -1,252 +0,0 @@
-/**
- *  Gidjit Hub
- *
- *  Copyright 2016 Matthew Page
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gidjit Hub",
-    namespace: "com.gidjit.smartthings.hub",
-    author: "Matthew Page",
-    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
-    category: "Convenience",
-    iconUrl: "http://www.gidjit.com/appicon.png",
-    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
-    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
-    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
-
-
-
-preferences {
-  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
-
-  }
-}
-mappings {
-  path("/structureinfo") {
-    action: [
-      GET: "structureInfo"
-    ]
-  }
-  path("/helloactions") {
-    action: [
-      GET: "helloActions"
-    ]
-  }
-  path("/helloactions/:label") {
-    action: [
-      PUT: "executeAction"
-    ]
-  }
-
-  path("/switch/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-
-  path("/thermostat/:id/:command") {
-    action: [
-      PUT: "updateThermostat"
-    ]
-  }
-
-  path("/windowshade/:id/:command") {
-    action: [
-      PUT: "updateWindowShade"
-    ]
-  }
-  path("/acquiredata/:id") {
-    action: [
-      GET: "acquiredata"
-    ]
-  }
-}
-
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// subscribe to attributes, devices, locations, etc.
-}
-def helloActions() {
-	def actions = location.helloHome?.getPhrases()*.label
-    if(!actions) {
-    	return []
-    }
-	return actions
-}
-def executeAction() {
-    def actions = location.helloHome?.getPhrases()*.label
-    def a = actions?.find() { it == params.label }
-    if (!a) {
-        httpError(400, "invalid label $params.label")
-        return
-    }
-    location.helloHome?.execute(params.label)
-}
-/*  this is the primary function called to query at the structure and its devices */
-def structureInfo() { //list all devices
-	def list = [:]
-    def currId = location.id
-    list[currId] = [:]
-    list[currId].name = location.name
-    list[currId].id = location.id
-    list[currId].temperatureScale = location.temperatureScale
-    list[currId].devices = [:]
-  
-    def setValues = {
-   		if (params.brief) {
-            return [id: it.id, name: it.displayName]
-        }
-        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
-            "$it.name"
-        }, suppAttributes: it.supportedAttributes.collect {
-            "$it.name"      
-        }, suppCommands: it.supportedCommands.collect {
-            "$it.name"      
-        }]
-
-        return newList
-    }
-    switches?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    thermostats?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    windowShades?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-
-    return list
-
-}
-/*  This function returns all of the current values of the specified Devices attributes */
-def acquiredata() {
-	def resp = [:]
-    if (!params.id) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
-    	thermostats.find() { it.id == params.id }    
-   
-    if (!dev) {
-    	httpError(400, "invalid id $params.id")
-        return    
-    }
-    def att = dev.supportedAttributes
-    att.each {
-    	resp[it.name] = dev.currentValue("$it.name")
-    }
-    return resp
-}
-
-void updateSwitch() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def sw = switches.find() { it.id == params.id }
-    if (!sw) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    switch(command) {
-        case "on":
-        	if ( sw.currentSwitch != "on" ) {
-            	sw.on()
-            }
-            break
-        case "off":
-        	if ( sw.currentSwitch != "off" ) {
-            	sw.off()
-            }
-            break
-        default:
-            httpError(400, "$command is not a valid")
-    }
-}
-
-
-void updateThermostat() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def therm = thermostats.find() { it.id == params.id }
-    if (!therm || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-        "off",
-        "heat",
-        "emergencyHeat",
-        "cool",
-        "fanOn",
-        "fanAuto",
-        "fanCirculate",
-        "auto"
-
-	]
-    def passNumParamComm = [
-    	"setHeatingSetpoint",
-    	"setCoolingSetpoint",   
-    ]
-    def passStringParamComm = [
-        "setThermostatMode",
-        "setThermostatFanMode",
-	]
-    if (command in passComm) {
-    	therm."$command"()	
-    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
-    	therm."$command"(Float.parseFloat(params.p1))	
-    } else if (command in passStringParamComm && params.p1) {
-    	therm."$command"(params.p1)	
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-
-void updateWindowShade() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def ws = windowShades.find() { it.id == params.id }
-    if (!ws || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-		"open",
-        "close",
-        "presetPosition",
-	]
-    if (command in passComm) {
-    	ws."$command"()		
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-// TODO: implement event handlers
--- a/smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy
+++ b/smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy
@@ -4,33 +4,29 @@
 import java.text.DecimalFormat
 import groovy.json.JsonSlurper

-private getApiUrl()			{ "https://api.netatmo.com" }
-private getVendorName()		{ "netatmo" }
-private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
-private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
+private apiUrl() 			{ "https://api.netatmo.com" }
+private getVendorName() 	{ "netatmo" }
+private getVendorAuthPath()	{ "https://api.netatmo.com/oauth2/authorize?" }
+private getVendorTokenPath(){ "https://api.netatmo.com/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
-private getClientId()		{ appSettings.clientId }
-private getClientSecret()	{ appSettings.clientSecret }
-private getServerUrl() 		{ appSettings.serverUrl }
-private getShardUrl()		{ return getApiServerUrl() }
-private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
-private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
+private getClientId() 		{ appSettings.clientId }
+private getClientSecret() 	{ appSettings.clientSecret }
+private getServerUrl() 		{ "https://graph.api.smartthings.com" }

 // Automatically generated. Make future change here.
 definition(
-	name: "Netatmo (Connect)",
-	namespace: "dianoga",
-	author: "Brian Steere",
-	description: "Netatmo Integration",
-	category: "SmartThings Labs",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-	oauth: true,
-	singleInstance: true
+    name: "Netatmo (Connect)",
+    namespace: "dianoga",
+    author: "Brian Steere",
+    description: "Netatmo Integration",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
+    oauth: true,
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "serverUrl"
 }

 preferences {
@@ -39,52 +35,35 @@ preferences {
 }

 mappings {
-	path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
-	path("/oauth/callback") {action: [GET: "callback"]}
+	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
+	path("/receiveToken"){action: [POST: "receiveToken", GET: "receiveToken"]}
+    path("/auth"){action: [GET: "auth"]}
 }

 def authPage() {
 	log.debug "In authPage"
+	if(canInstallLabs()) {
+		def description = null

-	def description
-	def uninstallAllowed = false
-	def oauthTokenProvided = false
+		if (state.vendorAccessToken == null) {
+			log.debug "About to create access token."

-	if (!state.accessToken) {
-		log.debug "About to create access token."
-		state.accessToken = createAccessToken()
-	}
+			createAccessToken()
+			description = "Tap to enter Credentials."

-	if (canInstallLabs()) {
-
-		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
-
-		if (state.authToken) {
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url:buildRedirectUrl("auth"), style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description }
+			}
+		} else {
 			description = "Tap 'Next' to proceed"
-			uninstallAllowed = true
-			oauthTokenProvided = true
-		} else {
-			description = "Click to enter Credentials."
-		}

-		if (!oauthTokenProvided) {
-			log.debug "Show the login page"
-			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
-				}
-			}
-		} else {
-			log.debug "Show the devices page"
-			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
-				}
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
 			}
 		}
-	} else {
+	}
+	else
+	{
 		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.

 To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
@@ -99,184 +78,44 @@ To update your Hub, access Location Settings in the Main Menu (tap the gear next
 	}
 }

+def auth() {
+	redirect location: oauthInitUrl()
+}
+
 def oauthInitUrl() {
 	log.debug "In oauthInitUrl"

+	/* OAuth Step 1: Request access code with our client ID */
+
 	state.oauthInitState = UUID.randomUUID().toString()

-	def oauthParams = [
-		response_type: "code",
+	def oauthParams = [ response_type: "code",
 		client_id: getClientId(),
-		client_secret: getClientSecret(),
 		state: state.oauthInitState,
-		redirect_uri: getCallbackUrl(),
+		redirect_uri: buildRedirectUrl("receiveToken") ,
 		scope: "read_station"
-	]
-
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
-
-	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
-}
-
-def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
-
-	def code = params.code
-	def oauthState = params.state
-
-	if (oauthState == state.oauthInitState) {
-
-		def tokenParams = [
-			client_secret: getClientSecret(),
-			client_id : getClientId(),
-			grant_type: "authorization_code",
-			redirect_uri: getCallbackUrl(),
-			code: code,
-			scope: "read_station"
 		]

-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
-
-		def tokenUrl = getVendorTokenPath()
-		def params = [
-			uri: tokenUrl,
-			contentType: 'application/x-www-form-urlencoded',
-			body: tokenParams
-		]
-
-		log.debug "PARAMS: ${params}"
-
-		httpPost(params) { resp ->
-
-			def slurper = new JsonSlurper()
-
-			resp.data.each { key, value ->
-				def data = slurper.parseText(key)
-
-				state.refreshToken = data.refresh_token
-				state.authToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
-			}
-		}
-
-		// Handle success and failure here, and render stuff accordingly
-		if (state.authToken) {
-			success()
-		} else {
-			fail()
-		}
-
-	} else {
-		log.error "callback() failed oauthState != state.oauthInitState"
-	}
+	return getVendorAuthPath() + toQueryString(oauthParams)
 }

-def success() {
-	log.debug "in success"
-	def message = """
-	<p>We have located your """ + getVendorName() + """ account.</p>
-	<p>Tap 'Done' to continue to Devices.</p>
-	"""
-	connectionStatus(message)
+def buildRedirectUrl(endPoint) {
+	log.debug "In buildRedirectUrl"
+
+	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
 }

-def fail() {
-	log.debug "in fail"
-	def message = """
-	<p>The connection could not be established!</p>
-	<p>Click 'Done' to return to the menu.</p>
-	"""
-	connectionStatus(message)
-}
-
-def connectionStatus(message, redirectUrl = null) {
-	def redirectHtml = ""
-	if (redirectUrl) {
-		redirectHtml = """
-			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-		"""
-	}
-
-	def html = """
-		<!DOCTYPE html>
-		<html>
-		<head>
-		<meta name="viewport" content="width=device-width, initial-scale=1">
-		<title>${getVendorName()} Connection</title>
-		<style type="text/css">
-			* { box-sizing: border-box; }
-			@font-face {
-				font-family: 'Swiss 721 W01 Thin';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			@font-face {
-				font-family: 'Swiss 721 W01 Light';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			.container {
-				width: 100%;
-				padding: 40px;
-				/*background: #eee;*/
-				text-align: center;
-			}
-			img {
-				vertical-align: middle;
-			}
-			img:nth-child(2) {
-				margin: 0 30px;
-			}
-			p {
-				font-size: 2.2em;
-				font-family: 'Swiss 721 W01 Thin';
-				text-align: center;
-				color: #666666;
-				margin-bottom: 0;
-			}
-			/*
-			p:last-child {
-				margin-top: 0px;
-			}
-			*/
-			span {
-				font-family: 'Swiss 721 W01 Light';
-				}
-		</style>
-		</head>
-		<body>
-			<div class="container">
-				<img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-				${message}
-			</div>
-        </body>
-        </html>
-	"""
-	render contentType: 'text/html', data: html
-}
-
-def refreshToken() {
-	log.debug "In refreshToken"
+def receiveToken() {
+	log.debug "In receiveToken"

 	def oauthParams = [
 		client_secret: getClientSecret(),
 		client_id: getClientId(),
-		grant_type: "refresh_token",
-		refresh_token: state.refreshToken
-	]
+		grant_type: "authorization_code",
+		redirect_uri: buildRedirectUrl('receiveToken'),
+		code: params.code,
+		scope: "read_station"
+		]

 	def tokenUrl = getVendorTokenPath()
 	def params = [
@@ -285,7 +124,201 @@ def refreshToken() {
 		body: oauthParams,
 	]

-	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
+    log.debug params
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
+	try {
+		httpPost(params) { response ->
+        	log.debug response.data
+			def slurper = new JsonSlurper();
+
+			response.data.each {key, value ->
+				def data = slurper.parseText(key);
+				log.debug "Data: $data"
+
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
+				return
+			}
+
+		}
+	} catch (Exception e) {
+		log.debug "Error: $e"
+	}
+
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token, bail on install
+		return
+	}
+
+	/* OAuth Step 3: Use the access token to call into the vendor API throughout your code using state.vendorAccessToken. */
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>${getVendorName()} Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 100%;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>We have located your """ + getVendorName() + """ account.</p>
+                <p>Tap 'Done' to process your credentials.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+def receivedToken() {
+	log.debug "In receivedToken"
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>Withings Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 560px;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>Tap 'Done' to continue to Devices.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+// "
+
+def refreshToken() {
+	log.debug "In refreshToken"
+
+	def oauthParams = [
+		client_secret: getClientSecret(),
+		client_id: getClientId(),
+		grant_type: "refresh_token",
+		refresh_token: state.vendorRefreshToken
+		]
+
+	def tokenUrl = getVendorTokenPath()
+	def params = [
+		uri: tokenUrl,
+		contentType: 'application/x-www-form-urlencoded',
+		body: oauthParams,
+	]
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
 	try {
 		httpPost(params) { response ->
 			def slurper = new JsonSlurper();
@@ -294,9 +327,9 @@ def refreshToken() {
 				def data = slurper.parseText(key);
 				log.debug "Data: $data"

-				state.refreshToken = data.refresh_token
-				state.accessToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
 				return true
 			}

@@ -305,8 +338,9 @@ def refreshToken() {
 		log.debug "Error: $e"
 	}

-	// We didn't get an access token
-	if ( !state.accessToken ) {
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token
 		return false
 	}
 }
@@ -337,10 +371,10 @@ def initialize() {

 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]

 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -448,13 +482,13 @@ def listDevices() {
 }

 def apiGet(String path, Map query, Closure callback) {
-	if(now() >= state.tokenExpires) {
+	if(now() >= state.vendorTokenExpires) {
 		refreshToken();
 	}

-	query['access_token'] = state.accessToken
+	query['access_token'] = state.vendorAccessToken
 	def params = [
-		uri: getApiUrl(),
+		uri: apiUrl(),
 		path: path,
 		'query': query
 	]
@@ -487,12 +521,12 @@ def poll() {
    log.debug "State: ${state.deviceState}"

 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }

 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())
--- a/smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy
+++ b/smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy
@@ -370,7 +370,9 @@ def parse_api_response(resp, message) {
    }
 }

-def getServerUrl() { return getApiServerUrl() }
+def getServerUrl() { 
+	return "https://graph.api.smartthings.com" 
+}

 def debugEvent(message, displayEvent) {
    def results = [
--- a/smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy
+++ b/smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy
@@ -21,12 +21,6 @@ preferences()
 	section("Allow Simple Control to Monitor and Control These Things...")
    {
    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-    	input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-        input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-        input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-        input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-        input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
  	}
 	
 	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
@@ -37,17 +31,12 @@ preferences()

 mappings {
 	path("/devices") {
-    	action: [
-        	GET: "getDevices"
-        ]
-	}
-    path("/:deviceType/devices") {
    	action: [
        	GET: "getDevices",
            POST: "handleDevicesWithIDs"
        ]
-    }
-    path("/device/:deviceType/:id") {
+	}
+    path("/device/:id") {
    	action: [
        	GET: "getDevice",
            POST: "updateDevice"
@@ -104,40 +93,33 @@ def handleDevicesWithIDs()
    //log.debug("ids: ${ids}")
    def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")
    if (command)
    {
-    	def statusCode = 404
+    	def success = false
 	    //log.debug("command ${command}, arguments ${arguments}")
    	for (devId in ids)
        {
 			def device = allDevices.find { it.id == devId }
-            //log.debug("device: ${device}")
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-            	if (arguments) {
+			if (device) {
+				if (arguments) {
 					device."$command"(*arguments)
-                }
-                else {
-                	device."$command"()
-                }
-				statusCode = 200
+				} else {
+					device."$command"()
+				}
+				success = true
 			} else {
-            	statusCode = 403
+            	//log.debug("device not found ${devId}")
 			}
 		}
-        def responseData = "{}"
-        switch (statusCode)
+        
+        if (success)
        {
-        	case 403:
-            	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-                break
-			case 404:
-            	responseData = '{"msg": "Device not found"}'
-                break
+        	render status: 200, data: "{}"
+        }
+        else
+        {
+        	render status: 404, data: '{"msg": "Device not found"}'
        }
-        render status: statusCode, data: responseData
    }
    else
    {
@@ -182,101 +164,25 @@ def updateDevice()
 	def data = request.JSON
 	def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")

 	//log.debug("updateDevice, params: ${params}, request: ${data}")
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
-		def statusCode = 404
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-	        	if (arguments) {
-					device."$command"(*arguments)
-	            }
-	            else {
-	            	device."$command"()
-	            }
-				statusCode = 200
+			if (arguments) {
+				device."$command"(*arguments)
 			} else {
-	        	statusCode = 403
+				device."$command"()
 			}
+			render status: 204, data: "{}"
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
 		}
-		
-	    def responseData = "{}"
-	    switch (statusCode)
-	    {
-	    	case 403:
-	        	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-	            break
-			case 404:
-	        	responseData = '{"msg": "Device not found"}'
-	            break
-	    }
-	    render status: statusCode, data: responseData
 	}
 }

-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	//log.debug("validateCommand ${command}")
-    def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-    //log.debug("capabilityCommands: ${capabilityCommands}")
-	def currentDeviceCapability = getCapabilityName(deviceType)
-    //log.debug("currentDeviceCapability: ${currentDeviceCapability}")
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-        case "thermostats":
-        	return "Thermostat"
-        case "doorControls":
-        	return "Door Control"
-        case "colorControls":
-        	return "Color Control"
-        case "musicPlayers":
-        	return "Music Player"
-        case "switchLevels":
-        	return "Switch Level"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions()
 {
 	//log.debug "listSubscriptions()"
@@ -455,13 +361,7 @@ def agentDiscovery(params=[:])
        }
        section("Allow Simple Control to Monitor and Control These Things...")
        {
-			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-			input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-			input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-			input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-			input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-			input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-			input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
+	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 	  	}
    }
 }
@@ -772,3 +672,5 @@ def List getRealHubFirmwareVersions()
 }


+
+
--- a/smartapps/smartthings/button-controller.src/button-controller.groovy
+++ b/smartapps/smartthings/button-controller.src/button-controller.groovy
@@ -297,8 +297,8 @@ private getTimeOk() {
 	def result = true
 	if (starting && ending) {
 		def currTime = now()
-		def start = timeToday(starting, location.timeZone).time
-		def stop = timeToday(ending, location.timeZone).time
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
 		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
 	}
 	log.trace "timeOk = $result"
--- a/smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy
+++ b/smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy
@@ -39,7 +39,6 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
-	page(name: "unsupportedDevicesPage")
 }

 def rootPage() {
@@ -48,9 +47,6 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
-				if (dimmersContainUnsupportedDevices()) {
-					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
-				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -75,31 +71,6 @@ def rootPage() {
 	}
 }

-def unsupportedDevicesPage() {
-
-	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
-
-	dynamicPage(name: "unsupportedDevicesPage") {
-		if (unsupportedDimmers) {
-			section("These devices do not support the setLevel command") {
-				unsupportedDimmers.each {
-					paragraph deviceLabel(it)
-				}
-			}
-			section {
-				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
-			}
-			section {
-				paragraph "If you think there is a mistake here, please contact support."
-			}
-		} else {
-			section {
-				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
-			}
-		}
-	}
-}
-
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {

@@ -557,16 +528,14 @@ def updateDimmers(percentComplete) {
 		} else {

 			def shouldChangeColors = (colorize && colorize != "false")
+			def canChangeColors = hasSetColorCommand(dimmer)

-			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
-				def hue = getHue(dimmer, nextLevel)
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
-				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
-			} else if (hasSetLevelCommand(dimmer)) {
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
-				dimmer.setLevel(nextLevel)
+			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
+
+			if (shouldChangeColors && canChangeColors) {
+				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
 			} else {
-				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
+				dimmer.setLevel(nextLevel)
 			}

 		}
@@ -848,21 +817,24 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }

-private dimmersContainUnsupportedDevices() {
-	def found = dimmers.find { hasSetLevelCommand(it) == false }
-	return found != null
-}
-
 private hasSetLevelCommand(device) {
-	return hasCommand(device, "setLevel")
+	def isDimmer = false
+	device.supportedCommands.each {
+		if (it.name.contains("setLevel")) {
+			isDimmer = true
+		}
+	}
+	return isDimmer
 }

 private hasSetColorCommand(device) {
-	return hasCommand(device, "setColor")
-}
-
-private hasCommand(device, String command) {
-	return (device.supportedCommands.find { it.name == command } != null)
+	def hasColor = false
+	device.supportedCommands.each {
+		if (it.name.contains("setColor")) {
+			hasColor = true
+		}
+	}
+	return hasColor
 }

 private dimmersWithSetColorCommand() {
@@ -1101,4 +1073,4 @@ def hasStartLevel() {

 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}
--- a/smartapps/smartthings/hue-connect.src/hue-connect.groovy
+++ b/smartapps/smartthings/hue-connect.src/hue-connect.groovy
@@ -30,7 +30,6 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
-	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -54,21 +53,12 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0

-	if (numFound == 0) {
-		if (state.bridgeRefreshCount == 25) {
-			log.trace "Cleaning old bridges memory"
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-		} else if (state.bridgeRefreshCount > 100) {
-			// five minutes have passed, give up
-			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
-			// however it is probably a SmartThings settings issue
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-			state.bridgeRefreshCount = 0
-			return bridgeDiscoveryFailed()
-		}
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }

 	ssdpSubscribe()

@@ -89,13 +79,6 @@ def bridgeDiscovery(params=[:])
 	}
 }

-def bridgeDiscoveryFailed() {
-	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
-		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
-		}
-	}
-}
-
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -105,15 +88,19 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
    def paragraphText
+    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
    } else {
    	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
    }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}

 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -123,6 +110,8 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
@@ -146,14 +135,13 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
-	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
-	def title = selectedBridge?.value?.name ?: "Find bridges"

 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
+			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]

 		}
@@ -335,8 +323,6 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
-	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
-		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -360,29 +346,26 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-
-				if (newHueBulb != null) {
-					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+                if (newHueBulb != null) {
+                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
-						d.completedSetup = true
 						d.refresh()
 					}
-				} else {
-					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-				}
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
 			} else {
-			 	//backwards compatable
+            	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -414,7 +397,6 @@ def addBridge() {
            }
        	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
-				d?.completedSetup = true
 				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                def childDevice = getChildDevice(d.deviceNetworkId)
                childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -502,21 +484,7 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
-			// characters are printed on the back so using that to identify bridge
-			def idNumber = body?.device?.serialNumber?.text()
-			if (idNumber?.size() >= 6)
-				idNumber = idNumber[-6..-1].toUpperCase()
-
-			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
-			// replace IP with serial number to make it easier for user to identify
-			def name = body?.device?.friendlyName?.text()
-			def index = name?.indexOf('(')
-			if (index != -1) {
-				name = name.substring(0,index)
-				name += " ($idNumber)"
-			}
-			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}
@@ -689,7 +657,7 @@ def parse(childDevice, description) {
            	log.warn "Parsing Body failed - trying again..."
                poll()
            }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
            	//poll response
                def bulbs = getChildDevices()
                for (bulb in body) {
@@ -830,22 +798,22 @@ def setColorTemperature(childDevice, huesettings) {

 def setColor(childDevice, huesettings) {
    log.debug "Executing 'setColor($huesettings)'"
-
+    
    def value = [:]
    def hue = null
    def sat = null
    def xy = null
-
+    
    if (huesettings.hex != null) {
        value.xy = getHextoXY(huesettings.hex)
    } else {
        if (huesettings.hue != null)
            value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)
+        if (huesettings.saturation != null)   
            value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
    }
-
-    // Default behavior is to turn light on
+    
+    // Default behavior is to turn light on 
    value.on = true

    if (huesettings.level != null) {
@@ -853,7 +821,7 @@ def setColor(childDevice, huesettings) {
            value.on = false
        else if (huesettings.level == 1)
            value.bri = 1
-        else
+        else 
            value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
    }
    value.alert = huesettings.alert ? huesettings.alert : "none"
--- a/smartapps/smartthings/its-too-cold.src/its-too-cold.groovy
+++ b/smartapps/smartthings/its-too-cold.src/its-too-cold.groovy
@@ -73,8 +73,7 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}
--- a/smartapps/smartthings/its-too-hot.src/its-too-hot.groovy
+++ b/smartapps/smartthings/its-too-hot.src/its-too-hot.groovy
@@ -73,8 +73,7 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}
--- a/smartapps/smartthings/life360-connect.src/life360-connect.groovy
+++ b/smartapps/smartthings/life360-connect.src/life360-connect.groovy
@@ -27,6 +27,7 @@ definition(
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
+    appSetting "serverUrl"
 }

 preferences {
@@ -191,7 +192,7 @@ def getSmartThingsClientId() {
   return "pREqugabRetre4EstetherufrePumamExucrEHuc"
 }

-def getServerUrl() { getApiServerUrl() }
+def getServerUrl() { appSettings.serverUrl }

 def buildRedirectUrl()
 {
--- a/smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy
+++ b/smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy
@@ -339,7 +339,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-        runEvery5Minutes("poll")
+        runEvery5Minutes("discovery")
 	}
 }

@@ -394,9 +394,9 @@ def discovery() {
        }
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
-    state.resethub = true
+        state.resethub = true
 	} catch (e) {
-    log.info "Logitech Harmony - Error: $e"
+		log.warn "Hostname in certificate didn't match. Please try again later."
 	}
    return null
 }
@@ -474,7 +474,7 @@ def activity(dni,mode) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
    if (state.HarmonyAccessToken) {
-    	  getActivityList()
+    	getActivityList()
        def Params = [auth: state.HarmonyAccessToken]
        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
        try {
@@ -520,17 +520,14 @@ def poll() {
                return "Poll completed $map - $state.hubs"
            }
        } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
-        }
-    }
+            if (e.statusCode == 401) { // token is expired
+                state.remove("HarmonyAccessToken")
+                return "Harmony Access token has expired"
+            }
+		} catch(Exception e) {
+        	log.trace e
+		}
+	}
 }


@@ -658,73 +655,29 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
+
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-    if (device) {
-        if (validateCommand(device, command)) {
-            if (arguments) {
-                device."$command"(*arguments)
-            } else {
-                device."$command"()
-            }
-            render status: 204, data: "{}"
-        } else {
-          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
-        }
-    } else {
-      render status: 404, data: '{"msg": "Device not found"}'
-    }
-  }
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(device)
-	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
+		if (device) {
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
+			}
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
+		}
 	}
 }

-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(device) {
-    def capName = ""
-    if (switches.find{it.id == device.id})
-			capName = "Switch"
-		else if (alarms.find{it.id == device.id})
-			capName = "Alarm"
-		else if (locks.find{it.id == device.id})
-			capName = "Lock"
-    log.trace "Device: $device - Capability Name: $capName"
-		return capName
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -823,33 +776,18 @@ def deviceHandler(evt) {
 }

 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
-  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-  	sendHubCommand(new physicalgraph.device.HubAction(
-  		method: "POST",
-  		path: path,
-  		headers: [
-  			"Host": host,
-  			"Content-Type": "application/json"
-  		],
-  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-  	))
-  } else {
-    def params = [
-      uri: callbackUrl,
-      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-    ]
-    try {
-        log.debug "Sending data to Harmony Cloud: $params"
-        httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
-        }
-    } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
-    }
-  }
+	def callback = new URI(callbackUrl)
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
+		path: path,
+		headers: [
+			"Host": host,
+			"Content-Type": "application/json"
+		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
 }

 def listHubs() {
--- a/smartapps/smartthings/ubi.src/ubi.groovy
+++ b/smartapps/smartthings/ubi.src/ubi.groovy
@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLocks",
-			POST: "updateLocks"
+			PUT: "updateLock",
+			POST: "updateLock"
 		]
 	}
 	path("/locks/:id") {
@@ -442,87 +442,31 @@ def executePhrase() {
 }

 private void updateAll(devices) {
-	def type = params.param1
 	def command = request.JSON?.command
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
 	}
 }

 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	def type = params.param1
-	def command = request.JSON?.command
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
 			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
 	}
-
-	if (command) {
-		executeCommand(device, type, command)
-	}
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
 }

 private show(devices, type) {
--- a/smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy
+++ b/smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy
@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
    else {
    	if(people){
        	//don't turn off lights if anyone is home
-        	if(someoneIsHome){
+        	if(someoneIsHome()){
        	    log.debug("Stopping Check for Light")
        	    unschedule()
        	}
--- a/smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy
+++ b/smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy
@@ -92,89 +92,24 @@ void updateLock() {

 private void updateAll(devices) {
 	def command = request.JSON?.command
-	def type = params.param1
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command) {
+		devices."$command"()
 	}
 }

 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	def type = params.param1
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-
 	if (command) {
-		executeCommand(device, type, command)
+		def device = devices.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }

-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
-}
-
 private show(devices, name) {
 	def device = devices.find { it.id == params.id }
 	if (!device) {