MSA-1244: 자동으로 음악을 틀어주는 기능입니다.

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,6 +12,16 @@
  *
  */
  
+ /*
+ *  Purpose: Arrival Sensor HA DTH File
+ *
+ *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
+ *
+ *  Change History:
+ *  1. 20160115 TW - Update/Edit to support i18n translations
+ *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
+ */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: Arrival Sensor HA i18n Translation File
+#
+# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160115 TW Initial release with informal Korean translation.
+#	2. 20160121 TW Added def preference section titles.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,13 +13,12 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
-        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -89,10 +88,6 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -138,7 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	log.debug "productTypeId:    ${cmd.productTypeId}"
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2016 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,8 +53,6 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -37,6 +37,9 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -38,6 +38,9 @@ metadata {
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -33,6 +33,9 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
               attributeState "level", action:"switch level.setLevel", range:"(0..100)"
             }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
+			}
         }
 
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,110 +0,0 @@
-/**
- *  Hue White Ambiance Bulb
- *
- *  Philips Hue Type "Color Temperature Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-    // Automatically generated. Make future change here.
-    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch Level"
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Switch"
-        capability "Refresh"
-
-        command "refresh"
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles (scale: 2){
-        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["rich-control"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "parse() - $description"
-    def results = []
-
-    def map = description
-    if (description instanceof String)  {
-        log.debug "Hue Ambience Bulb stringToMap - ${map}"
-        map = stringToMap(description)
-    }
-
-    if (map?.name && map?.value) {
-        results << createEvent(name: "${map?.name}", value: "${map?.value}")
-    }
-    results
-}
-
-// handle commands
-void on() {
-    log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-    log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "$percent is not 0-100"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-

devicetypes/smartthings/light-sensor.src/light-sensor.groovy

@@ -58,4 +58,4 @@ def parse(String description) {
 	}
 	log.debug "Parse returned ${result?.descriptionText}"
 	return result
-}
+}

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
+#==============================================================================
+# Purpose: Mobile Presence i18n Translation File
+#
+# Filename: mobile-presence.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160205 TW Initial release with informal Korean translation.
+#	2. 20160224 TW Updated with formal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,6 +13,14 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
+===============================================================================
+ *  Purpose: Mobile Presence DTH File
+ *
+ *  Filename: mobile-presence.src/mobile-presence.groovy
+ *
+ *  Change History:
+ *  1. 20160205 TW - Update/Edit to support i18n translations
+===============================================================================
  */
  
 metadata {

devicetypes/smartthings/osram-lightify-led-tunable-white-60w.src/osram-lightify-led-tunable-white-60w.groovy

@@ -19,6 +19,11 @@ metadata {
         capability "Sensor"
 
         attribute "colorName", "string"
+
+        // indicates that device keeps track of heartbeat (in state.heartbeat)
+        attribute "heartbeat", "string"
+        
+
     }
 
     // simulator metadata
@@ -70,6 +75,9 @@ metadata {
 def parse(String description) {
     //log.trace description
 
+    // save heartbeat (i.e. last time we got a message from device)
+    state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
     if (description?.startsWith("catchall:")) {
         if(description?.endsWith("0100") ||description?.endsWith("1001") || description?.matches("on/off\\s*:\\s*1"))
         {
@@ -124,6 +132,7 @@ def off() {
 }
 
 def refresh() {
+    sendEvent(name: "heartbeat", value: "alive", displayed:false)
     [
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
             "st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartPower Outlet i18n Translation File
+#
+# Filename: SmartPower-Outlet.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with informal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,11 +13,18 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartPower Outlet DTH File
+ *
+ *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+===============================================================================
  */
-
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -25,6 +33,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"
+
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
@@ -78,6 +89,9 @@ metadata {
 def parse(String description) {
 	log.debug "description is $description"
 
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+
 	def finalResult = zigbee.getKnownDescription(description)
 
 	//TODO: Remove this after getKnownDescription can parse it automatically
@@ -118,11 +132,11 @@ def on() {
 }
 
 def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
 	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Moisture Sensor i18n Translation File
+#
+# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Dry'''.ko=건조

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,10 +13,19 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Moisture Sensor DTH File
+ *
+ *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -311,8 +321,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,15 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Motion Sensor i18n Translation File
+#
+# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,10 +13,19 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Motion Sensor DTH File
+ *
+ *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -323,8 +333,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,3 +1,4 @@
+#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -11,6 +12,14 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
+#==============================================================================
+# Purpose: SmartSense Multi Sensor i18n Translation File
+#
+# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160117 TW Initial release with informal Korean translation.
+#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,4 +1,5 @@
 /*
+===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,10 +13,19 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Multi Sensor DTH File
+ *
+ *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -403,37 +413,76 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}
 
 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -16,7 +16,7 @@
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
- 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+ 	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
  		capability "Battery"
  		capability "Configuration"
  		capability "Contact Sensor"
@@ -300,7 +300,6 @@ def getTemperature(value) {
 	}
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -252,7 +252,6 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/tile-ux/README.md

@@ -1,42 +0,0 @@
-# Device Tiles Examples and Reference
-
-This package contains examples of Device tiles, organized by tile type.
-
-## Purpose
-
-Each Device Handler shows example usages of a specific tile, and is meant to represent the variety of permutations that a tile can be configured.
-
-The various tiles can be used by QA to test tiles on all supported mobile devices, and by developers as a reference implementation.
-
-## Installation
-
-1. Self-publish the Device Handlers in this package.
-2. Self-publish the Device Tile Controller SmartApp. The SmartApp can be found [here](https://github.com/SmartThingsCommunity/SmartThingsPublic/blob/master/smartapps/smartthings/tile-ux/device-tile-controller.src/device-tile-controller.groovy).
-3. Install the SmartApp from the Marketplace, under "My Apps".
-4. Select the simulated devices you want to install and press "Done".
-
-The simulated devices can then be found in the "Things" view of "My Home" in the mobile app.
-You may wish to create a new room for these simulated devices for easy access.
-
-## Usage
-
-Each simulated device can be interacted with like other devices.
-You can use the mobile app to interact with the tiles to see how they look and behave.
-
-## Troubleshooting
-
-If you get an error when installing the simulated devices using the controller SmartApp, ensure that you have published all the Device Handlers for yourself.
-Also check live logging to see if there is a specific tile that is causing installation issues.
-
-## FAQ
-
-*Question: A tile isn't behaving as expected. What should I do?*
-
-QA should create a JIRA ticket for any issues or inconsistencies of tiles across devices.
-
-Developers may file a support ticket, and reference the specific tile and issue observed.
-
-*Question: I'd like to contribute an example tile usage that would be helpful for testing and reference purposes. Can I do that?*
-
-We recommend that you open an issue in the SmartThingsPublic repository describing the example tile and usage.
-That way we can discuss with you the proposed change, and then if appropriate you can create a PR associated to the issue.

devicetypes/smartthings/tile-ux/tile-basic-colorwheel.src/tile-basic-colorwheel.groovy

@@ -22,7 +22,7 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("currentColor", "device.color") {
-			state "color", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		controlTile("rgbSelector", "device.color", "color", height: 6, width: 6, inactiveLabel: false) {
@@ -41,13 +41,6 @@ def parse(String description) {
 	log.debug "Parsing '${description}'"
 }
 
-def setColor(value) {
-	log.debug "setting color: $value"
-    if (value.hex) { sendEvent(name: "color", value: value.hex) }
-    if (value.hue) { sendEvent(name: "hue", value: value.hue) }
-    if (value.saturation) { sendEvent(name: "saturation", value: value.saturation) }
-}
-
 def setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	sendEvent(name: "saturation", value: percent)

devicetypes/smartthings/tile-ux/tile-basic-slider.src/tile-basic-slider.groovy

@@ -39,7 +39,7 @@ metadata {
 		}
 
 		valueTile("rangeValue", "device.rangedLevel", height: 2, width: 2) {
-			state "range", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		controlTile("rangeSliderConstrained", "device.rangedLevel", "slider", height: 2, width: 4, range: "(40..60)") {

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -41,17 +41,17 @@ metadata {
 
 		// standard flat tile with only a label
 		standardTile("flatLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "label", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'On Action', action: "switch.on", backgroundColor: "#ffffff"
 		}
 
 		// standard flat tile with icon and label
 		standardTile("flatIconLabel", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "iconLabel", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff", defaultState: true
+			state "default", label: 'Off Action', action: "switch.off", icon:"st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 
 		// standard flat tile with only icon (Refreh text is IN the icon file)
 		standardTile("flatIcon", "device.switch", width: 2, height: 2, decoration: "flat") {
-			state "icon", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		// standard with defaultState = true
@@ -74,19 +74,19 @@ metadata {
 
 		// utility tiles to fill the spaces
 		standardTile("empty2x2", "null", width: 2, height: 2, decoration: "flat") {
-			state "emptySmall", label:'', defaultState: true
+			state "default", label:''
 		}
 		standardTile("empty4x2", "null", width: 4, height: 2, decoration: "flat") {
-			state "emptyBigger", label:'', defaultState: true
+			state "default", label:''
 		}
 
 		// multi-line text (explicit newlines)
 		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
-			state "multiLine", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
-			state "multiLineIcon", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}
 
 		main("actionRings")

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -22,68 +22,68 @@ metadata {
 
 	tiles(scale: 2) {
 		valueTile("text", "device.text", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("longText", "device.longText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("integer", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("integerFloat", "device.integerFloat", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("pi", "device.pi", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("floatAsText", "device.floatAsText", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("bgColor", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', backgroundColor: "#e86d13", defaultState: true
+			state "default", label:'${currentValue}', backgroundColor: "#e86d13"
 		}
 
 		valueTile("bgColorRange", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#ff0000"],
 				[value: 90, color: "#0000ff"]
 			]
 		}
 
 		valueTile("bgColorRangeSingleItem", "device.integer", width: 2, height: 2) {
-			state "val", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#333333"]
 			]
 		}
 
 		valueTile("bgColorRangeConflict", "device.integer", width: 2, height: 2) {
-			state "valWithConflict", label:'${currentValue}', defaultState: true, backgroundColors: [
+			state "default", label:'${currentValue}', backgroundColors: [
 				[value: 10, color: "#990000"],
 				[value: 10, color: "#000099"]
 			]
 		}
 
 		valueTile("noValue", "device.nada", width: 4, height: 2) {
-			state "noval", label:'${currentValue}', defaultState: true
+			state "default", label:'${currentValue}'
 		}
 
 		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', defaultState: true
+			state "default", label: '${currentValue}'
 		}
 
 		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
-			state "val", label: '${currentValue}', icon: "st.switches.switch.off", defaultState: true
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
 		}
 
 		main("text")
 		details([
-			"text", "longText", "integer",
+			"text", "longText", "integer", 
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
             "bgColorRangeConflict", "noValue",

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -39,15 +39,15 @@ metadata {
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", icon: 'st.Weather.weather1', action:"randomizeLevel", defaultState: true
+				attributeState "default", icon: 'st.Weather.weather1', action:"randomizeLevel"
 			}
 			tileAttribute("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", defaultState: true
+				attributeState "default", action:"switch level.setLevel"
 			}
 		}
 		multiAttributeTile(name:"valueTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.level", key: "PRIMARY_CONTROL") {
-				attributeState "level", label:'${currentValue}', defaultState: true, backgroundColors:[
+				attributeState "default", label:'${currentValue}', backgroundColors:[
 					[value: 0, color: "#ff0000"],
 					[value: 20, color: "#ffff00"],
 					[value: 40, color: "#00ff00"],
@@ -69,34 +69,34 @@ metadata {
 		}
 		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multiLineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
 			}
 		}
 		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "lengthyText", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}
 		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
 			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "multilineText", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on", defaultState: true
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
 			}
 		}
 
@@ -110,7 +110,7 @@ def installed() {
 	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse(String description) {
+def parse() {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/tile-ux/tile-multiattribute-lighting.src/tile-multiattribute-lighting.groovy

@@ -96,10 +96,10 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "reset", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single", defaultState: true
+			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "refresh", label:"", action:"refresh.refresh", icon:"st.secondary.refresh", defaultState: true
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
 		main(["switch"])
@@ -173,6 +173,7 @@ def setColor(value) {
 def reset() {
 	log.debug "Executing 'reset'"
 	setAdjustedColor([level:100, hex:"#90C638", saturation:56, hue:23])
+	//parent.poll()
 }
 
 def setAdjustedColor(value) {
@@ -188,6 +189,7 @@ def setAdjustedColor(value) {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
+	//parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -206,3 +208,4 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
+

devicetypes/smartthings/tile-ux/tile-multiattribute-mediaplayer.src/tile-multiattribute-mediaplayer.groovy

@@ -37,10 +37,10 @@ metadata {
 				attributeState("stopped", label:"Stopped", action:"music Player.play", nextState: "playing")
 			}
 			tileAttribute("device.status", key: "PREVIOUS_TRACK") {
-				attributeState("status", action:"music Player.previousTrack", defaultState: true)
+				attributeState("default", action:"music Player.previousTrack")
 			}
 			tileAttribute("device.status", key: "NEXT_TRACK") {
-				attributeState("status", action:"music Player.nextTrack", defaultState: true)
+				attributeState("default", action:"music Player.nextTrack")
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState("level", action:"music Player.setLevel")
@@ -50,7 +50,7 @@ metadata {
 				attributeState("muted", action:"music Player.unmute", nextState: "unmuted")
 			}
 			tileAttribute("device.trackDescription", key: "MARQUEE") {
-				attributeState("trackDescription", label:"${currentValue}", defaultState: true)
+				attributeState("default", label:"${currentValue}")
 			}
 		}
 

devicetypes/smartthings/tile-ux/tile-multiattribute-thermostat.src/tile-multiattribute-thermostat.groovy

@@ -32,14 +32,14 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"thermostatFull", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
 				attributeState("VALUE_DOWN", action: "tempDown")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
-				attributeState("humidity", label:'${currentValue}%', unit:"%", defaultState: true)
+				attributeState("default", label:'${currentValue}%', unit:"%")
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
@@ -53,16 +53,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatNoHumidity", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("temp", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
 				attributeState("VALUE_UP", action: "tempUp")
@@ -80,16 +79,15 @@ metadata {
 				attributeState("auto", label:'${name}')
 			}
 			tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
-                attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
-				attributeState("heatingSetpoint", label:'${currentValue}', unit:"dF")
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
-				attributeState("coolingSetpoint", label:'${currentValue}', unit:"dF", defaultState: true)
+				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 		}
 		multiAttributeTile(name:"thermostatBasic", type:"thermostat", width:6, height:4) {
 			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
-				attributeState("temp", label:'${currentValue}', unit:"dF", defaultState: true,
+				attributeState("default", label:'${currentValue}', unit:"dF",
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -120,30 +118,30 @@ metadata {
 			)
 		}
 		standardTile("tempDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempDown", label:'down', action:"tempDown", defaultState: true
+			state "default", label:'down', action:"tempDown"
 		}
 		standardTile("tempUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "tempUp", label:'up', action:"tempUp", defaultState: true
+			state "default", label:'up', action:"tempUp"
 		}
 
 		valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue} heat', unit: "F", backgroundColor:"#ffffff"
 		}
 		standardTile("heatDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatDown", label:'down', action:"heatDown", defaultState: true
+			state "default", label:'down', action:"heatDown"
 		}
 		standardTile("heatUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "heatUp", label:'up', action:"heatUp", defaultState: true
+			state "default", label:'up', action:"heatUp"
 		}
 
 		valueTile("coolingSetpoint", "device.coolingSetpoint", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue} cool', unit:"F", backgroundColor:"#ffffff"
 		}
 		standardTile("coolDown", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolDown", label:'down', action:"coolDown", defaultState: true
+			state "default", label:'down', action:"coolDown"
 		}
 		standardTile("coolUp", "device.temperature", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "coolUp", label:'up', action:"coolUp", defaultState: true
+			state "default", label:'up', action:"coolUp"
 		}
 
 		standardTile("mode", "device.thermostatMode", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,9 +11,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-//@Deprecated - Moved to zll-rgbw-bulb
-
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -25,10 +22,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-
+  
 Custom Commands:
   setAdjustedColor
-
+    
 */
 
 metadata {
@@ -44,7 +41,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -1,102 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
-        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getEvent(description)
-    if (resultMap) {
-        sendEvent(resultMap)
-    }
-    else {
-        log.debug "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
-}
-
-def poll() {
-    refresh()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,150 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Control"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.color", key: "COLOR_CONTROL") {
-                attributeState "color", action:"color control.setColor"
-            }
-        }
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
-    }
-    else {
-        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        log.trace "zigbeeMap : $zigbeeMap"
-
-        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
-            }
-            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
-            }
-        }
-        else {
-            log.info "DID NOT PARSE MESSAGE for description : $description"
-        }
-    }
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-    refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-    refreshAttributes()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
-}
-
-def setColorTemperature(value) {
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-    log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,124 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Polling"
-        capability "Refresh"
-        capability "Switch"
-        capability "Switch Level"
-
-        attribute "colorName", "string"
-        command "setGenericName"
-
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
-        }
-
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-    def event = zigbee.getEvent(description)
-    if (event) {
-        sendEvent(event)
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def on() {
-    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-}
-
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = ""
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
 	}
 
 	// simulator metadata
@@ -264,9 +263,5 @@ def retypeBasedOnMSR() {
 			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
 			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
-			setDeviceType("Vision Motion Sensor Plus (SG)")
-			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -95,17 +95,11 @@ def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	updateDataValue("manufacturer", cmd.manufacturerName)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+	if (state.manufacturer != cmd.manufacturerName) {
+		updateDataValue("manufacturer", cmd.manufacturerName)
+	}
 }
 
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -1,252 +0,0 @@
-/**
- *  Gidjit Hub
- *
- *  Copyright 2016 Matthew Page
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gidjit Hub",
-    namespace: "com.gidjit.smartthings.hub",
-    author: "Matthew Page",
-    description: "Act as an endpoint so user's of Gidjit can quickly access and control their devices and execute routines. Users can do this quickly as Gidjit filters these actions  based on their environment",
-    category: "Convenience",
-    iconUrl: "http://www.gidjit.com/appicon.png",
-    iconX2Url: "http://www.gidjit.com/appicon@2x.png",
-    iconX3Url: "http://www.gidjit.com/appicon@3x.png",
-    oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
-
-
-
-preferences {
-  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
-
-  }
-}
-mappings {
-  path("/structureinfo") {
-    action: [
-      GET: "structureInfo"
-    ]
-  }
-  path("/helloactions") {
-    action: [
-      GET: "helloActions"
-    ]
-  }
-  path("/helloactions/:label") {
-    action: [
-      PUT: "executeAction"
-    ]
-  }
-
-  path("/switch/:id/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-
-  path("/thermostat/:id/:command") {
-    action: [
-      PUT: "updateThermostat"
-    ]
-  }
-
-  path("/windowshade/:id/:command") {
-    action: [
-      PUT: "updateWindowShade"
-    ]
-  }
-  path("/acquiredata/:id") {
-    action: [
-      GET: "acquiredata"
-    ]
-  }
-}
-
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// subscribe to attributes, devices, locations, etc.
-}
-def helloActions() {
-	def actions = location.helloHome?.getPhrases()*.label
-    if(!actions) {
-    	return []
-    }
-	return actions
-}
-def executeAction() {
-    def actions = location.helloHome?.getPhrases()*.label
-    def a = actions?.find() { it == params.label }
-    if (!a) {
-        httpError(400, "invalid label $params.label")
-        return
-    }
-    location.helloHome?.execute(params.label)
-}
-/*  this is the primary function called to query at the structure and its devices */
-def structureInfo() { //list all devices
-	def list = [:]
-    def currId = location.id
-    list[currId] = [:]
-    list[currId].name = location.name
-    list[currId].id = location.id
-    list[currId].temperatureScale = location.temperatureScale
-    list[currId].devices = [:]
-  
-    def setValues = {
-   		if (params.brief) {
-            return [id: it.id, name: it.displayName]
-        }
-        def newList = [id: it.id, name: it.displayName, suppCapab: it.capabilities.collect {
-            "$it.name"
-        }, suppAttributes: it.supportedAttributes.collect {
-            "$it.name"      
-        }, suppCommands: it.supportedCommands.collect {
-            "$it.name"      
-        }]
-
-        return newList
-    }
-    switches?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    thermostats?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-    windowShades?.each {
-      list[currId].devices[it.id] = setValues(it)
-    }
-
-    return list
-
-}
-/*  This function returns all of the current values of the specified Devices attributes */
-def acquiredata() {
-	def resp = [:]
-    if (!params.id) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def dev = switches.find() { it.id == params.id } ?: windowShades.find() { it.id == params.id } ?:
-    	thermostats.find() { it.id == params.id }    
-   
-    if (!dev) {
-    	httpError(400, "invalid id $params.id")
-        return    
-    }
-    def att = dev.supportedAttributes
-    att.each {
-    	resp[it.name] = dev.currentValue("$it.name")
-    }
-    return resp
-}
-
-void updateSwitch() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def sw = switches.find() { it.id == params.id }
-    if (!sw) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    switch(command) {
-        case "on":
-        	if ( sw.currentSwitch != "on" ) {
-            	sw.on()
-            }
-            break
-        case "off":
-        	if ( sw.currentSwitch != "off" ) {
-            	sw.off()
-            }
-            break
-        default:
-            httpError(400, "$command is not a valid")
-    }
-}
-
-
-void updateThermostat() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def therm = thermostats.find() { it.id == params.id }
-    if (!therm || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-        "off",
-        "heat",
-        "emergencyHeat",
-        "cool",
-        "fanOn",
-        "fanAuto",
-        "fanCirculate",
-        "auto"
-
-	]
-    def passNumParamComm = [
-    	"setHeatingSetpoint",
-    	"setCoolingSetpoint",   
-    ]
-    def passStringParamComm = [
-        "setThermostatMode",
-        "setThermostatFanMode",
-	]
-    if (command in passComm) {
-    	therm."$command"()	
-    } else if (command in passNumParamComm && params.p1 && params.p1.isFloat()) {
-    	therm."$command"(Float.parseFloat(params.p1))	
-    } else if (command in passStringParamComm && params.p1) {
-    	therm."$command"(params.p1)	
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-
-void updateWindowShade() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-	def ws = windowShades.find() { it.id == params.id }
-    if (!ws || !command) {
-    	httpError(400, "invalid id $params.id")
-        return
-    }
-    def passComm = [
-		"open",
-        "close",
-        "presetPosition",
-	]
-    if (command in passComm) {
-    	ws."$command"()		
-    } else {
-    	httpError(400, "$command is not a valid command")
-    }
-}
-// TODO: implement event handlers

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -4,33 +4,29 @@
 import java.text.DecimalFormat
 import groovy.json.JsonSlurper
 
-private getApiUrl()			{ "https://api.netatmo.com" }
-private getVendorName()		{ "netatmo" }
-private getVendorAuthPath()	{ "${apiUrl}/oauth2/authorize?" }
-private getVendorTokenPath(){ "${apiUrl}/oauth2/token" }
+private apiUrl() 			{ "https://api.netatmo.com" }
+private getVendorName() 	{ "netatmo" }
+private getVendorAuthPath()	{ "https://api.netatmo.com/oauth2/authorize?" }
+private getVendorTokenPath(){ "https://api.netatmo.com/oauth2/token" }
 private getVendorIcon()		{ "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png" }
-private getClientId()		{ appSettings.clientId }
-private getClientSecret()	{ appSettings.clientSecret }
-private getServerUrl() 		{ appSettings.serverUrl }
-private getShardUrl()		{ return getApiServerUrl() }
-private getCallbackUrl()	{ "${serverUrl}/oauth/callback" }
-private getBuildRedirectUrl() { "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
+private getClientId() 		{ appSettings.clientId }
+private getClientSecret() 	{ appSettings.clientSecret }
+private getServerUrl() 		{ "https://graph.api.smartthings.com" }
 
 // Automatically generated. Make future change here.
 definition(
-	name: "Netatmo (Connect)",
-	namespace: "dianoga",
-	author: "Brian Steere",
-	description: "Netatmo Integration",
-	category: "SmartThings Labs",
-	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
-	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
-	oauth: true,
-	singleInstance: true
+    name: "Netatmo (Connect)",
+    namespace: "dianoga",
+    author: "Brian Steere",
+    description: "Netatmo Integration",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/netamo-icon-1%402x.png",
+    oauth: true,
+    singleInstance: true
 ){
 	appSetting "clientId"
 	appSetting "clientSecret"
-	appSetting "serverUrl"
 }
 
 preferences {
@@ -39,52 +35,35 @@ preferences {
 }
 
 mappings {
-	path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
-	path("/oauth/callback") {action: [GET: "callback"]}
+	path("/receivedToken"){action: [POST: "receivedToken", GET: "receivedToken"]}
+	path("/receiveToken"){action: [POST: "receiveToken", GET: "receiveToken"]}
+    path("/auth"){action: [GET: "auth"]}
 }
 
 def authPage() {
 	log.debug "In authPage"
+	if(canInstallLabs()) {
+		def description = null
 
-	def description
-	def uninstallAllowed = false
-	def oauthTokenProvided = false
+		if (state.vendorAccessToken == null) {
+			log.debug "About to create access token."
 
-	if (!state.accessToken) {
-		log.debug "About to create access token."
-		state.accessToken = createAccessToken()
-	}
+			createAccessToken()
+			description = "Tap to enter Credentials."
 
-	if (canInstallLabs()) {
-
-		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
-
-		if (state.authToken) {
+			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url:buildRedirectUrl("auth"), style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description }
+			}
+		} else {
 			description = "Tap 'Next' to proceed"
-			uninstallAllowed = true
-			oauthTokenProvided = true
-		} else {
-			description = "Click to enter Credentials."
-		}
 
-		if (!oauthTokenProvided) {
-			log.debug "Show the login page"
-			return dynamicPage(name: "Credentials", title: "Authorize Connection", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					paragraph "Tap below to log in to the netatmo and authorize SmartThings access."
-					href url:redirectUrl, style:"embedded", required:false, title:"Connect to ${getVendorName()}:", description:description
-				}
-			}
-		} else {
-			log.debug "Show the devices page"
-			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: uninstallAllowed, install:false) {
-				section() {
-					input(name:"Devices", style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description) 
-				}
+			return dynamicPage(name: "Credentials", title: "Credentials Accepted!", nextPage:"listDevices", uninstall: true, install:false) {
+				section { href url: buildRedirectUrl("receivedToken"), style:"embedded", required:false, title:"${getVendorName()} is now connected to SmartThings!", description:description }
 			}
 		}
-	} else {
+	}
+	else
+	{
 		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
 
 To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
@@ -99,184 +78,44 @@ To update your Hub, access Location Settings in the Main Menu (tap the gear next
 	}
 }
 
+def auth() {
+	redirect location: oauthInitUrl()
+}
+
 def oauthInitUrl() {
 	log.debug "In oauthInitUrl"
 
+	/* OAuth Step 1: Request access code with our client ID */
+
 	state.oauthInitState = UUID.randomUUID().toString()
 
-	def oauthParams = [
-		response_type: "code",
+	def oauthParams = [ response_type: "code",
 		client_id: getClientId(),
-		client_secret: getClientSecret(),
 		state: state.oauthInitState,
-		redirect_uri: getCallbackUrl(),
+		redirect_uri: buildRedirectUrl("receiveToken") ,
 		scope: "read_station"
-	]
-
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
-
-	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
-}
-
-def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
-
-	def code = params.code
-	def oauthState = params.state
-
-	if (oauthState == state.oauthInitState) {
-
-		def tokenParams = [
-			client_secret: getClientSecret(),
-			client_id : getClientId(),
-			grant_type: "authorization_code",
-			redirect_uri: getCallbackUrl(),
-			code: code,
-			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
-
-		def tokenUrl = getVendorTokenPath()
-		def params = [
-			uri: tokenUrl,
-			contentType: 'application/x-www-form-urlencoded',
-			body: tokenParams
-		]
-
-		log.debug "PARAMS: ${params}"
-
-		httpPost(params) { resp ->
-
-			def slurper = new JsonSlurper()
-
-			resp.data.each { key, value ->
-				def data = slurper.parseText(key)
-
-				state.refreshToken = data.refresh_token
-				state.authToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
-			}
-		}
-
-		// Handle success and failure here, and render stuff accordingly
-		if (state.authToken) {
-			success()
-		} else {
-			fail()
-		}
-
-	} else {
-		log.error "callback() failed oauthState != state.oauthInitState"
-	}
+	return getVendorAuthPath() + toQueryString(oauthParams)
 }
 
-def success() {
-	log.debug "in success"
-	def message = """
-	<p>We have located your """ + getVendorName() + """ account.</p>
-	<p>Tap 'Done' to continue to Devices.</p>
-	"""
-	connectionStatus(message)
+def buildRedirectUrl(endPoint) {
+	log.debug "In buildRedirectUrl"
+
+	return getServerUrl() + "/api/token/${state.accessToken}/smartapps/installations/${app.id}/${endPoint}"
 }
 
-def fail() {
-	log.debug "in fail"
-	def message = """
-	<p>The connection could not be established!</p>
-	<p>Click 'Done' to return to the menu.</p>
-	"""
-	connectionStatus(message)
-}
-
-def connectionStatus(message, redirectUrl = null) {
-	def redirectHtml = ""
-	if (redirectUrl) {
-		redirectHtml = """
-			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-		"""
-	}
-
-	def html = """
-		<!DOCTYPE html>
-		<html>
-		<head>
-		<meta name="viewport" content="width=device-width, initial-scale=1">
-		<title>${getVendorName()} Connection</title>
-		<style type="text/css">
-			* { box-sizing: border-box; }
-			@font-face {
-				font-family: 'Swiss 721 W01 Thin';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			@font-face {
-				font-family: 'Swiss 721 W01 Light';
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
-				src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
-				url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
-				font-weight: normal;
-				font-style: normal;
-			}
-			.container {
-				width: 100%;
-				padding: 40px;
-				/*background: #eee;*/
-				text-align: center;
-			}
-			img {
-				vertical-align: middle;
-			}
-			img:nth-child(2) {
-				margin: 0 30px;
-			}
-			p {
-				font-size: 2.2em;
-				font-family: 'Swiss 721 W01 Thin';
-				text-align: center;
-				color: #666666;
-				margin-bottom: 0;
-			}
-			/*
-			p:last-child {
-				margin-top: 0px;
-			}
-			*/
-			span {
-				font-family: 'Swiss 721 W01 Light';
-				}
-		</style>
-		</head>
-		<body>
-			<div class="container">
-				<img src=""" + getVendorIcon() + """ alt="Vendor icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
-				<img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
-				${message}
-			</div>
-        </body>
-        </html>
-	"""
-	render contentType: 'text/html', data: html
-}
-
-def refreshToken() {
-	log.debug "In refreshToken"
+def receiveToken() {
+	log.debug "In receiveToken"
 
 	def oauthParams = [
 		client_secret: getClientSecret(),
 		client_id: getClientId(),
-		grant_type: "refresh_token",
-		refresh_token: state.refreshToken
-	]
+		grant_type: "authorization_code",
+		redirect_uri: buildRedirectUrl('receiveToken'),
+		code: params.code,
+		scope: "read_station"
+		]
 
 	def tokenUrl = getVendorTokenPath()
 	def params = [
@@ -285,7 +124,201 @@ def refreshToken() {
 		body: oauthParams,
 	]
 
-	// OAuth Step 2: Request access token with our client Secret and OAuth "Code"
+    log.debug params
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
+	try {
+		httpPost(params) { response ->
+        	log.debug response.data
+			def slurper = new JsonSlurper();
+
+			response.data.each {key, value ->
+				def data = slurper.parseText(key);
+				log.debug "Data: $data"
+
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
+				return
+			}
+
+		}
+	} catch (Exception e) {
+		log.debug "Error: $e"
+	}
+
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token, bail on install
+		return
+	}
+
+	/* OAuth Step 3: Use the access token to call into the vendor API throughout your code using state.vendorAccessToken. */
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>${getVendorName()} Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 100%;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>We have located your """ + getVendorName() + """ account.</p>
+                <p>Tap 'Done' to process your credentials.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+def receivedToken() {
+	log.debug "In receivedToken"
+
+	def html = """
+        <!DOCTYPE html>
+        <html>
+        <head>
+        <meta name="viewport" content="width=device-width, initial-scale=1">
+        <title>Withings Connection</title>
+        <style type="text/css">
+            * { box-sizing: border-box; }
+            @font-face {
+                font-family: 'Swiss 721 W01 Thin';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-thin-webfont.svg#swis721_th_btthin') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            @font-face {
+                font-family: 'Swiss 721 W01 Light';
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot');
+                src: url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.eot?#iefix') format('embedded-opentype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.woff') format('woff'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.ttf') format('truetype'),
+                     url('https://s3.amazonaws.com/smartapp-icons/Partner/fonts/swiss-721-light-webfont.svg#swis721_lt_btlight') format('svg');
+                font-weight: normal;
+                font-style: normal;
+            }
+            .container {
+                width: 560px;
+                padding: 40px;
+                /*background: #eee;*/
+                text-align: center;
+            }
+            img {
+                vertical-align: middle;
+            }
+            img:nth-child(2) {
+                margin: 0 30px;
+            }
+            p {
+                font-size: 2.2em;
+                font-family: 'Swiss 721 W01 Thin';
+                text-align: center;
+                color: #666666;
+                margin-bottom: 0;
+            }
+        /*
+            p:last-child {
+                margin-top: 0px;
+            }
+        */
+            span {
+                font-family: 'Swiss 721 W01 Light';
+            }
+        </style>
+        </head>
+        <body>
+            <div class="container">
+                <img src=""" + getVendorIcon() + """ alt="Vendor icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/connected-device-icn%402x.png" alt="connected device icon" />
+                <img src="https://s3.amazonaws.com/smartapp-icons/Partner/support/st-logo%402x.png" alt="SmartThings logo" />
+                <p>Tap 'Done' to continue to Devices.</p>
+			</div>
+        </body>
+        </html>
+        """
+	render contentType: 'text/html', data: html
+}
+
+// "
+
+def refreshToken() {
+	log.debug "In refreshToken"
+
+	def oauthParams = [
+		client_secret: getClientSecret(),
+		client_id: getClientId(),
+		grant_type: "refresh_token",
+		refresh_token: state.vendorRefreshToken
+		]
+
+	def tokenUrl = getVendorTokenPath()
+	def params = [
+		uri: tokenUrl,
+		contentType: 'application/x-www-form-urlencoded',
+		body: oauthParams,
+	]
+
+	/* OAuth Step 2: Request access token with our client Secret and OAuth "Code" */
 	try {
 		httpPost(params) { response ->
 			def slurper = new JsonSlurper();
@@ -294,9 +327,9 @@ def refreshToken() {
 				def data = slurper.parseText(key);
 				log.debug "Data: $data"
 
-				state.refreshToken = data.refresh_token
-				state.accessToken = data.access_token
-				state.tokenExpires = now() + (data.expires_in * 1000)
+				state.vendorRefreshToken = data.refresh_token
+				state.vendorAccessToken = data.access_token
+				state.vendorTokenExpires = now() + (data.expires_in * 1000)
 				return true
 			}
 
@@ -305,8 +338,9 @@ def refreshToken() {
 		log.debug "Error: $e"
 	}
 
-	// We didn't get an access token
-	if ( !state.accessToken ) {
+	log.debug "State: $state"
+
+	if ( !state.vendorAccessToken ) {  //We didn't get an access token
 		return false
 	}
 }
@@ -337,10 +371,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -448,13 +482,13 @@ def listDevices() {
 }
 
 def apiGet(String path, Map query, Closure callback) {
-	if(now() >= state.tokenExpires) {
+	if(now() >= state.vendorTokenExpires) {
 		refreshToken();
 	}
 
-	query['access_token'] = state.accessToken
+	query['access_token'] = state.vendorAccessToken
 	def params = [
-		uri: getApiUrl(),
+		uri: apiUrl(),
 		path: path,
 		'query': query
 	]
@@ -487,12 +521,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -370,7 +370,9 @@ def parse_api_response(resp, message) {
     }
 }
 
-def getServerUrl() { return getApiServerUrl() }
+def getServerUrl() { 
+	return "https://graph.api.smartthings.com" 
+}
 
 def debugEvent(message, displayEvent) {
     def results = [

smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy

@@ -21,12 +21,6 @@ preferences()
 	section("Allow Simple Control to Monitor and Control These Things...")
     {
     	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-    	input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-        input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-        input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-        input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-        input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-        input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
   	}
 	
 	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
@@ -37,17 +31,12 @@ preferences()
 
 mappings {
 	path("/devices") {
-    	action: [
-        	GET: "getDevices"
-        ]
-	}
-    path("/:deviceType/devices") {
     	action: [
         	GET: "getDevices",
             POST: "handleDevicesWithIDs"
         ]
-    }
-    path("/device/:deviceType/:id") {
+	}
+    path("/device/:id") {
     	action: [
         	GET: "getDevice",
             POST: "updateDevice"
@@ -104,40 +93,33 @@ def handleDevicesWithIDs()
     //log.debug("ids: ${ids}")
     def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")
     if (command)
     {
-    	def statusCode = 404
+    	def success = false
 	    //log.debug("command ${command}, arguments ${arguments}")
     	for (devId in ids)
         {
 			def device = allDevices.find { it.id == devId }
-            //log.debug("device: ${device}")
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-            	if (arguments) {
+			if (device) {
+				if (arguments) {
 					device."$command"(*arguments)
-                }
-                else {
-                	device."$command"()
-                }
-				statusCode = 200
+				} else {
+					device."$command"()
+				}
+				success = true
 			} else {
-            	statusCode = 403
+            	//log.debug("device not found ${devId}")
 			}
 		}
-        def responseData = "{}"
-        switch (statusCode)
+        
+        if (success)
         {
-        	case 403:
-            	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-                break
-			case 404:
-            	responseData = '{"msg": "Device not found"}'
-                break
+        	render status: 200, data: "{}"
+        }
+        else
+        {
+        	render status: 404, data: '{"msg": "Device not found"}'
         }
-        render status: statusCode, data: responseData
     }
     else
     {
@@ -182,101 +164,25 @@ def updateDevice()
 	def data = request.JSON
 	def command = data?.command
 	def arguments = data?.arguments
-	def type = params?.deviceType
-    //log.debug("device type: ${type}")
 
 	//log.debug("updateDevice, params: ${params}, request: ${data}")
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
-		def statusCode = 404
 		def device = allDevices.find { it.id == params.id }
 		if (device) {
-			// Check if we have a device that responds to the specified command
-			if (validateCommand(device, type, command)) {
-	        	if (arguments) {
-					device."$command"(*arguments)
-	            }
-	            else {
-	            	device."$command"()
-	            }
-				statusCode = 200
+			if (arguments) {
+				device."$command"(*arguments)
 			} else {
-	        	statusCode = 403
+				device."$command"()
 			}
+			render status: 204, data: "{}"
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
 		}
-		
-	    def responseData = "{}"
-	    switch (statusCode)
-	    {
-	    	case 403:
-	        	responseData = '{"msg": "Access denied. This command is not supported by current capability."}'
-	            break
-			case 404:
-	        	responseData = '{"msg": "Device not found"}'
-	            break
-	    }
-	    render status: statusCode, data: responseData
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	//log.debug("validateCommand ${command}")
-    def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-    //log.debug("capabilityCommands: ${capabilityCommands}")
-	def currentDeviceCapability = getCapabilityName(deviceType)
-    //log.debug("currentDeviceCapability: ${currentDeviceCapability}")
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-        case "thermostats":
-        	return "Thermostat"
-        case "doorControls":
-        	return "Door Control"
-        case "colorControls":
-        	return "Color Control"
-        case "musicPlayers":
-        	return "Music Player"
-        case "switchLevels":
-        	return "Switch Level"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions()
 {
 	//log.debug "listSubscriptions()"
@@ -455,13 +361,7 @@ def agentDiscovery(params=[:])
         }
         section("Allow Simple Control to Monitor and Control These Things...")
         {
-			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-			input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-			input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
-			input "doorControls", "capability.doorControl", title: "Which Door Controls?", multiple: true, required: false
-			input "colorControls", "capability.colorControl", title: "Which Color Controllers?", multiple: true, required: false
-			input "musicPlayers", "capability.musicPlayer", title: "Which Music Players?", multiple: true, required: false
-			input "switchLevels", "capability.switchLevel", title: "Which Adjustable Switches?", multiple: true, required: false
+	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 	  	}
     }
 }
@@ -772,3 +672,5 @@ def List getRealHubFirmwareVersions()
 }
 
 
+
+

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -297,8 +297,8 @@ private getTimeOk() {
 	def result = true
 	if (starting && ending) {
 		def currTime = now()
-		def start = timeToday(starting, location.timeZone).time
-		def stop = timeToday(ending, location.timeZone).time
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
 		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
 	}
 	log.trace "timeOk = $result"

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,7 +30,6 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
-	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -54,21 +53,12 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0) {
-		if (state.bridgeRefreshCount == 25) {
-			log.trace "Cleaning old bridges memory"
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-		} else if (state.bridgeRefreshCount > 100) {
-			// five minutes have passed, give up
-			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
-			// however it is probably a SmartThings settings issue
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-			state.bridgeRefreshCount = 0
-			return bridgeDiscoveryFailed()
-		}
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }
 
 	ssdpSubscribe()
 
@@ -89,13 +79,6 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
-def bridgeDiscoveryFailed() {
-	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
-		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
-		}
-	}
-}
-
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -105,15 +88,19 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
+    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -123,6 +110,8 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
@@ -146,14 +135,13 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
-	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
-	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
+			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -335,8 +323,6 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
-	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
-		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -360,29 +346,26 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-
-				if (newHueBulb != null) {
-					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+                if (newHueBulb != null) {
+                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
-						d.completedSetup = true
 						d.refresh()
 					}
-				} else {
-					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-				}
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
 			} else {
-			 	//backwards compatable
+            	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -414,7 +397,6 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
-				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -502,21 +484,7 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
-			// characters are printed on the back so using that to identify bridge
-			def idNumber = body?.device?.serialNumber?.text()
-			if (idNumber?.size() >= 6)
-				idNumber = idNumber[-6..-1].toUpperCase()
-
-			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
-			// replace IP with serial number to make it easier for user to identify
-			def name = body?.device?.friendlyName?.text()
-			def index = name?.indexOf('(')
-			if (index != -1) {
-				name = name.substring(0,index)
-				name += " ($idNumber)"
-			}
-			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -131,69 +131,19 @@ def update() {
 	def type = params.deviceType
 	def data = request.JSON
 	def devices = settings[type]
-	def device = settings[type]?.find { it.id == params.id }
 	def command = data.command
 
 	log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-	
-	if (!device) {
-		httpError(404, "Device not found")
-	} 
-	
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
+	if (command) {
+		def device = devices?.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "alarms":
-			return "Alarm"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-
 def show() {
 	def type = params.deviceType
 	def devices = settings[type]

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -73,8 +73,7 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -73,8 +73,7 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "F"
-			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
+			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:"F"}")
 			switch1?.on()
 		}
 	}

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -27,6 +27,7 @@ definition(
 ) {
 	appSetting "clientId"
 	appSetting "clientSecret"
+    appSetting "serverUrl"
 }
 
 preferences {
@@ -191,7 +192,7 @@ def getSmartThingsClientId() {
    return "pREqugabRetre4EstetherufrePumamExucrEHuc"
 }
 
-def getServerUrl() { getApiServerUrl() }
+def getServerUrl() { appSettings.serverUrl }
 
 def buildRedirectUrl()
 {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -339,7 +339,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-        runEvery5Minutes("poll")
+        runEvery5Minutes("discovery")
 	}
 }
 
@@ -394,9 +394,9 @@ def discovery() {
         }
 	} catch (java.net.SocketTimeoutException e) {
 		log.warn "Connection to the hub timed out. Please restart the hub and try again."
-    state.resethub = true
+        state.resethub = true
  	} catch (e) {
-    log.info "Logitech Harmony - Error: $e"
+		log.warn "Hostname in certificate didn't match. Please try again later."
 	}
     return null
 }
@@ -474,7 +474,7 @@ def activity(dni,mode) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	  getActivityList()
+    	getActivityList()
         def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
         try {
@@ -520,17 +520,14 @@ def poll() {
                 return "Poll completed $map - $state.hubs"
             }
         } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
-        }
-    }
+            if (e.statusCode == 401) { // token is expired
+                state.remove("HarmonyAccessToken")
+                return "Harmony Access token has expired"
+            }
+		} catch(Exception e) {
+        	log.trace e
+		}
+	}
 }
 
 

smartapps/smartthings/speaker-mood-music.src/speaker-mood-music.groovy

@@ -335,5 +335,4 @@ private timeIntervalLabel()
 {
 	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
 }
-// TODO - End Centralize
-
+// TODO - End Centralize

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLocks",
-			POST: "updateLocks"
+			PUT: "updateLock",
+			POST: "updateLock"
 		]
 	}
 	path("/locks/:id") {
@@ -442,87 +442,31 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
-	def type = params.param1
 	def command = request.JSON?.command
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	def type = params.param1
-	def command = request.JSON?.command
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
 			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
 	}
-
-	if (command) {
-		executeCommand(device, type, command)
-	}
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
 }
 
 private show(devices, type) {

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
     else {
     	if(people){
         	//don't turn off lights if anyone is home
-        	if(someoneIsHome){
+        	if(someoneIsHome()){
         	    log.debug("Stopping Check for Light")
         	    unschedule()
         	}