MSA-1312: 소리남

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-        fingerprint mfr:"010F", prod:"0C02", model:"1002"
     }
     simulator {
         //battery

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,110 +0,0 @@
-/**
- *  Hue White Ambiance Bulb
- *
- *  Philips Hue Type "Color Temperature Light"
- *
- *  Author: SmartThings
- */
-
-// for the UI
-metadata {
-    // Automatically generated. Make future change here.
-    definition (name: "Hue White Ambiance Bulb", namespace: "smartthings", author: "SmartThings") {
-        capability "Switch Level"
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Switch"
-        capability "Refresh"
-
-        command "refresh"
-    }
-
-    simulator {
-        // TODO: define status and reply messages here
-    }
-
-    tiles (scale: 2){
-        multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        main(["rich-control"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// parse events into attributes
-def parse(description) {
-    log.debug "parse() - $description"
-    def results = []
-
-    def map = description
-    if (description instanceof String)  {
-        log.debug "Hue Ambience Bulb stringToMap - ${map}"
-        map = stringToMap(description)
-    }
-
-    if (map?.name && map?.value) {
-        results << createEvent(name: "${map?.name}", value: "${map?.value}")
-    }
-    results
-}
-
-// handle commands
-void on() {
-    log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
-}
-
-void off() {
-    log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
-}
-
-void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "$percent is not 0-100"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
-    }
-}
-
-void refresh() {
-    log.debug "Executing 'refresh'"
-    parent.manualRefresh()
-}
-

devicetypes/smartthings/smartsense-motion-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -1,30 +0,0 @@
-# Smartsense Motion Sensor
-
-
-
-Works with: 
-
-* [Samsung SmartThings Motion Sensor](https://shop.smartthings.com/#!/products/samsung-smartthings-motion-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health]($health)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Motion Sensor** - can detect motion
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 motion sensor that has 120min check-in interval
-
-
-
-
-
-

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,21 +403,39 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}
 
 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 	return refreshCmds + enrollResponse()
 }
@@ -425,15 +443,38 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
 	}
 
 	// simulator metadata
@@ -264,9 +263,5 @@ def retypeBasedOnMSR() {
 			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
 			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
-			setDeviceType("Vision Motion Sensor Plus (SG)")
-			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -0,0 +1,345 @@
+/**
+ *  SmartThings service for Prempoint
+ *
+ *  Author: Prempoint Inc. (c) 2016
+ *   
+ */
+definition(
+    name: "Prempoint",
+    namespace: "prempoint.com",
+    author: "Prempoint Inc.",
+    description: "SmartThings service for Prempoint",
+    category: "Connections",
+    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
+    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
+    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
+    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
+
+preferences {
+	section("Allow Prempoint to Control & Access These Things...") {
+		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
+        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/list") {
+		action: [
+			GET: "listDevices"
+		]
+	}
+	path("/switches") {
+		action: [
+			GET: "listSwitches"
+		]
+	}
+	path("/switches/:id") {
+		action: [
+			GET: "showSwitch"
+		]
+	}
+    path("/switches/:id/:command") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/switches/:id/:command/:level") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/locks") {
+		action: [
+			GET: "listLocks"
+		]
+	}
+	path("/locks/:id") {
+		action: [
+			GET: "showLock"
+		]
+	}
+	path("/locks/:id/:command") {
+		action: [
+			GET: "updateLock"
+		]
+	}
+    path("/doors/:id") {
+		action: [
+			GET: "showDoor"
+		]
+	}
+   	path("/doors/:id/:command") {
+		action: [
+			GET: "updateDoor"
+		]
+	}
+	path("/garagedoors/:id") {
+		action: [
+			GET: "showGarageDoor"
+		]
+	}
+   	path("/garagedoors/:id/:command") {
+		action: [
+			GET: "updateGarageDoor"
+		]
+	}
+    path("/cameras/:id") {
+		action: [
+			GET: "showCamera"
+		]
+	}  
+    path("/cameras/:id/:command") {
+		action: [
+			GET: "updateCamera"
+		]
+	}  
+}
+
+def installed() {}
+
+def updated() {}
+
+def listDevices() {
+	log.debug "entering listDevices"
+    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
+    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
+}
+
+//switches
+def listSwitches() {
+    log.debug "entering listSwitches"
+	switches.collect{showDevice(it,"switch")}
+}
+
+def showSwitch() {
+	log.debug "entering showSwitches"
+	show(switches, "switch")
+}
+
+def updateSwitch() {
+	log.debug "entering updateSwitches"
+	update(switches, "switch")
+}
+
+//locks
+def listLocks() {
+	log.debug "entering listLocks"
+	locks.collect{showDevice(it,"lock")}
+}
+
+def showLock() {
+	log.debug "entering showLock"
+	show(locks, "lock")
+}
+
+def updateLock() {
+	log.debug "entering updateLock"
+	update(locks, "lock")
+}
+
+//doors
+def listDoors() {
+	log.debug "entering listDoors"
+	locks.collect{showDevice(it,"door")}
+}
+
+def showDoor() {
+	log.debug "entering showDoors"
+	show(doors, "door")
+}
+
+def updateDoor() {
+	log.debug "entering updateDoor"
+	update(doors, "door")
+}
+
+//garagedoors
+def listGarageDoors() {
+	log.debug "entering listGarageDoors"
+	locks.collect{showDevice(it,"garagedoor")}
+}
+
+def showGarageDoor() {
+	log.debug "entering showGarageDoors"
+	show(garagedoors, "garagedoor")
+}
+
+def updateGarageDoor() {
+	log.debug "entering updateGarageDoor"
+	update(gargedoors, "garagedoor")
+}
+
+//cameras
+def listCameras() {
+	log.debug "entering listCameras"
+	cameras.collect{showDevice(it,"image")}
+}
+
+def showCamera() {
+	log.debug "entering showCameras"
+	show(cameras, "camera")
+}
+
+def updateCamera() {
+	log.debug "entering updateCamera"
+	update(cameras, "camera")
+}
+
+def deviceHandler(evt) {}
+
+private update(devices, type) {
+	def rc = null
+
+	//def command = request.JSON?.command
+    def command = params.command
+    
+    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
+    
+    // Process the command.
+	if (command) 
+    {
+		def dev = devices.find { it.id == params.id }
+		if (!dev) {
+			httpError(404, "Device not found: $params.id")
+		} else if (type == "switch") {
+			switch(command) {
+			    case "on":
+			    	rc = dev.on()
+			    	break
+			    case "off":
+			    	rc = dev.off()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "lock") {
+			switch(command) {
+			    case "lock":
+			    	rc = dev.lock()
+			    	break
+			    case "unlock":
+			    	rc = dev.unlock()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
+			}
+		} else if (type == "door") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "garagedoor") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "camera") {
+			switch(command) {
+			    case "take":
+			    	rc = dev.take()
+			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		}
+
+		log.debug "executed device=$it.id $dev command=$command rc=$rc"
+        
+        // Check that the device is a switch that is currently on, supports 'setLevel"
+        // and that a level was specified.
+        int level = params.level ? params.level as int : -1;
+        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
+            log.debug "device about to setLevel=$level"
+            dev.setLevel(level);
+        }
+        
+        // Show the device info if necessary.
+        if (rc == null) {
+        	rc = showDevice(dev, type)
+        }
+	}
+    
+    return rc
+}
+
+private show(devices, type) {
+	def dev = devices.find { it.id == params.id }
+	if (!dev) {
+		httpError(404, "Device not found")
+	} else { 
+        // Show the device info.
+        showDevice(dev, type)
+	}
+}
+
+private showDevice(it, type) {
+	def props = null
+
+	// Get the current state for the device type.
+	def state = [it.currentState(type)]
+    
+	// Check that whether the a switch device with level support is located and update the returned device type.
+    def devType =  type
+    
+    if (type == "switch" && hasLevel(it)) {
+    	// Assign "switchWithLevel" to device type.
+    	devType = "switchWithLevel"
+        // Add the level state.
+        def levelState = it.currentState("level")
+        if (levelState) {
+        	state.add(levelState)
+        }
+    }
+    
+    log.debug "device label=$it.label type=$devType"
+    
+    // Assign the device item properties if appropriate.
+    if (it) {
+    	props = [id: it.id, label: it.label, type: devType, state: state]
+        // Add the hub information to the device properties
+        // if appropriate.
+        if (it.hub) {
+        	props.put("location", it.hub.hub.location)
+        }
+        if (it.currentImage) {
+        	props.put("currentImage", it.currentImage)
+        }
+    }
+    
+    return props
+}
+
+private hasLevel(device) {
+    // Default return value.
+    def rc = false;
+
+	// Get the device supported commands.
+    def supportedCommands = device.supportedCommands
+    
+    // Check to see if the "setLevel" was found and assign
+    // the appropriate return value.
+    if (supportedCommands) {
+        // Find the "setLevel" command. 
+        rc = supportedCommands.toString().indexOf("setLevel") != -1
+    }
+    
+    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
+            
+    return rc
+}

smartapps/smartthings/-.src/-.groovy

@@ -0,0 +1,316 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Speaker Control
+ *
+ *  Author: SmartThings
+ *
+ *  Date: 2013-12-10
+ */
+definition(
+    name: "스피커 컨트롤",
+    namespace: "smartthings",
+    author: "jung`s",
+    description: "Play or pause your Speaker when certain actions take place in your home.",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/sonos@2x.png"
+)
+
+preferences {
+	page(name: "mainPage", title: "Control your Speaker when something happens", install: true, uninstall: true)
+	page(name: "timeIntervalInput", title: "Only during a certain time") {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage") {
+		def anythingSet = anythingSet()
+		if (anythingSet) {
+			section("When..."){
+				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
+			}
+		}
+		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
+			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true
+			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true
+			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
+		}
+		section("Perform this action"){
+			input "actionType", "enum", title: "Action?", required: true, defaultValue: "play", options: [
+				"Play",
+				"Stop Playing",
+				"Toggle Play/Pause",
+				"Skip to Next Track",
+				"Play Previous Track"
+			]
+		}
+		section {
+			input "sonos", "capability.musicPlayer", title: "Speaker music player", required: true
+		}
+		section("More options", hideable: true, hidden: true) {
+			input "volume", "number", title: "Set the volume volume", description: "0-100%", required: false
+			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+			if (settings.modes) {
+            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+            }
+			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
+		}
+		section([mobileOnly:true]) {
+			label title: "Assign a name", required: false
+			mode title: "Set for specific mode(s)"
+		}
+	}
+}
+
+private anythingSet() {
+	for (name in ["motion","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","smoke","water","button1","triggerModes","timeOfDay"]) {
+		if (settings[name]) {
+			return true
+		}
+	}
+	return false
+}
+
+private ifUnset(Map options, String name, String capability) {
+	if (!settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+private ifSet(Map options, String name, String capability) {
+	if (settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribeToEvents()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	unschedule()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	log.trace "subscribeToEvents()"
+	subscribe(app, appTouchHandler)
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(smoke, "smoke.detected", eventHandler)
+	subscribe(smoke, "smoke.tested", eventHandler)
+	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
+	subscribe(water, "water.wet", eventHandler)
+	subscribe(button1, "button.pushed", eventHandler)
+
+	if (triggerModes) {
+		subscribe(location, modeChangeHandler)
+	}
+
+	if (timeOfDay) {
+		schedule(timeOfDay, scheduledTimeHandler)
+	}
+}
+
+def eventHandler(evt) {
+	if (allOk) {
+		def lastTime = state[frequencyKey(evt)]
+		if (oncePerDayOk(lastTime)) {
+			if (frequency) {
+				if (lastTime == null || now() - lastTime >= frequency * 60000) {
+					takeAction(evt)
+				}
+				else {
+					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
+				}
+			}
+			else {
+				takeAction(evt)
+			}
+		}
+		else {
+			log.debug "Not taking action because it was already taken today"
+		}
+	}
+}
+
+def modeChangeHandler(evt) {
+	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
+	if (evt.value in triggerModes) {
+		eventHandler(evt)
+	}
+}
+
+def scheduledTimeHandler() {
+	eventHandler(null)
+}
+
+def appTouchHandler(evt) {
+	takeAction(evt)
+}
+
+private takeAction(evt) {
+	log.debug "takeAction($actionType)"
+	def options = [:]
+	if (volume) {
+		sonos.setLevel(volume as Integer)
+		options.delay = 1000
+	}
+
+	switch (actionType) {
+		case "Play":
+			options ? sonos.on(options) : sonos.on()
+			break
+		case "Stop Playing":
+			options ? sonos.off(options) : sonos.off()
+			break
+		case "Toggle Play/Pause":
+			def currentStatus = sonos.currentValue("status")
+			if (currentStatus == "playing") {
+				options ? sonos.pause(options) : sonos.pause()
+			}
+			else {
+				options ? sonos.play(options) : sonos.play()
+			}
+			break
+		case "Skip to Next Track":
+			options ? sonos.nextTrack(options) : sonos.nextTrack()
+			break
+		case "Play Previous Track":
+			options ? sonos.previousTrack(options) : sonos.previousTrack()
+			break
+		default:
+			log.error "Action type '$actionType' not defined"
+	}
+
+	if (frequency) {
+		state.lastActionTimeStamp = now()
+	}
+}
+
+private frequencyKey(evt) {
+	//evt.deviceId ?: evt.value
+	"lastActionTimeStamp"
+}
+
+private dayString(Date date) {
+	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
+	if (location.timeZone) {
+		df.setTimeZone(location.timeZone)
+	}
+	else {
+		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+	}
+	df.format(date)
+}
+
+private oncePerDayOk(Long lastTime) {
+	def result = true
+	if (oncePerDay) {
+		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
+		log.trace "oncePerDayOk = $result"
+	}
+	result
+}
+
+// TODO - centralize somehow
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting, location?.timeZone).time
+		def stop = timeToday(ending, location?.timeZone).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private timeIntervalLabel()
+{
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}
+// TODO - End Centralize

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,7 +30,6 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
-	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -54,21 +53,12 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0) {
-		if (state.bridgeRefreshCount == 25) {
-			log.trace "Cleaning old bridges memory"
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-		} else if (state.bridgeRefreshCount > 100) {
-			// five minutes have passed, give up
-			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
-			// however it is probably a SmartThings settings issue
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-			state.bridgeRefreshCount = 0
-			return bridgeDiscoveryFailed()
-		}
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }
 
 	ssdpSubscribe()
 
@@ -89,13 +79,6 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
-def bridgeDiscoveryFailed() {
-	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
-		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
-		}
-	}
-}
-
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -105,15 +88,19 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
+    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -123,6 +110,8 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
@@ -146,14 +135,13 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
-	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
-	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
+			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -335,8 +323,6 @@ private getDeviceType(hueType) {
 		return "Hue Bulb"
 	else if (hueType?.equalsIgnoreCase("Color Light"))
 		return "Hue Bloom"
-	else if (hueType?.equalsIgnoreCase("Color Temperature Light"))
-		return "Hue White Ambiance Bulb"
 	else
 		return null
 }
@@ -360,29 +346,26 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-
-				if (newHueBulb != null) {
-					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+                if (newHueBulb != null) {
+                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
-						d.completedSetup = true
 						d.refresh()
 					}
-				} else {
-					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-				}
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
 			} else {
-			 	//backwards compatable
+            	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -414,7 +397,6 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
-				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -502,21 +484,7 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
-			// characters are printed on the back so using that to identify bridge
-			def idNumber = body?.device?.serialNumber?.text()
-			if (idNumber?.size() >= 6)
-				idNumber = idNumber[-6..-1].toUpperCase()
-
-			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
-			// replace IP with serial number to make it easier for user to identify
-			def name = body?.device?.friendlyName?.text()
-			def index = name?.indexOf('(')
-			if (index != -1) {
-				name = name.substring(0,index)
-				name += " ($idNumber)"
-			}
-			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}

smartapps/smartthings/ubi.src/ubi.groovy

@@ -107,8 +107,8 @@ mappings {
 	path("/locks") {
 		action: [
 			GET: "listLocks",
-			PUT: "updateLocks",
-			POST: "updateLocks"
+			PUT: "updateLock",
+			POST: "updateLock"
 		]
 	}
 	path("/locks/:id") {
@@ -442,87 +442,31 @@ def executePhrase() {
 }
 
 private void updateAll(devices) {
-	def type = params.param1
 	def command = request.JSON?.command
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command)
+	{
+		command = command.toLowerCase()
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
-	def type = params.param1
-	def command = request.JSON?.command
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
+	//def command = request.JSON?.command
+	def command = params.command
+	if (command)
+	{
+		command = command.toLowerCase()
+		def device = devices.find { it.id == params.id }
+		if (!device)
+		{
 			httpError(404, "Device not found")
+		}
+		else
+		{
+			device."$command"()
+		}
 	}
-
-	if (command) {
-		executeCommand(device, type, command)
-	}
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
 }
 
 private show(devices, type) {