MSA-1325: test

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -327,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-
+        
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    }
-
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
+				result.value = Math.min(100, (int) pct * 100)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -404,21 +403,39 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}
 
 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 	return refreshCmds + enrollResponse()
 }
@@ -426,15 +443,38 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
-			result.value = Math.min(100, roundedPct)
+			result.value = Math.min(100, (int) pct * 100)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,34 +13,32 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
-		capability "Sensor"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -73,10 +71,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -90,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -101,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -127,7 +125,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -137,14 +135,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +151,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -169,7 +167,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -202,7 +200,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -215,11 +213,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -230,8 +228,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -276,7 +273,6 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-
+        
 		command "enrollResponse"
-
-
+ 
+ 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
-
+ 
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-
+    	
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+        
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-
+        
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
-
+ 
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
-
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
+    
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-
+    
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
-
+ 
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-
+    
     def result = [
     	name: 'battery'
     ]
-
+    
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
-		result.value = Math.min(100, roundedPct)
+		result.value = Math.min(100, (int) pct * 100)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -262,7 +261,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-
+    
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -275,24 +274,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-
+        
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
+        
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
+        
+        
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
+        
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -300,11 +299,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [
-
+    [	
+    	
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-
+        
     ]
 }
 private hex(value) {

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -35,7 +36,6 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -81,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -94,9 +94,9 @@ def updated() {
 }
 
 def configure() {
-	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
+	delayBetween([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+		batteryGetCommand()
 	], 6000)
 }
 
@@ -147,11 +147,12 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -169,11 +170,12 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
+		cmds << batteryGetCommand()
 	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
@@ -210,7 +212,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
+			result << response(batteryGetCommand())
 		}
 	}
 
@@ -218,7 +220,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -230,16 +232,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 1) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
+def batteryGetCommand() {
+	def cmd = zwave.batteryV1.batteryGet()
+	if (state.sec) {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
 	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
+	cmd.format()
 }
 
 def retypeBasedOnMSR() {
@@ -262,12 +260,8 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
+			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
+			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -1,270 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
-		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
-			}
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main (["contact"])
-		details(["contact","battery"])
-	}
-
-	simulator {
-		// messages the device returns in response to commands it receives
-		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
-		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
-		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
-		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
-		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
-		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
-		status "wake up" : "command: 9881, payload: 00 84 07"
-		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
-		status "battery low" : "command: 9881, payload: 00 80 03 FF"
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x84: 2,  // WakeUp
-		0x86: 1,  // Version
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
-	} else {
-		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if (!device.currentState("ManufacturerCode")) {
-				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			}
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-		}
-	} else if (cmd.notificationType) {
-		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -1,327 +0,0 @@
-/**
-*	Copyright 2016 SmartThings
-*	Copyright 2015 AstraLink
-*
-*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
-*	in compliance with the License. You may obtain a copy of the License at:
-*
-*		http://www.apache.org/licenses/LICENSE-2.0
-*
-*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
-*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
-*	for the specific language governing permissions and limitations under the License.
-*
-*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
-*
-*/
-
-metadata {
-	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Motion Sensor"
-		capability "Temperature Measurement"
-		capability "Configuration"
-		capability "Battery"
-		capability "Sensor"
-
-		// for Astralink
-		attribute "ManufacturerCode", "string"
-		attribute "ProduceTypeCode", "string"
-		attribute "ProductCode", "string"
-		attribute "WakeUp", "string"
-		attribute "WirelessConfig", "string"
-				
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
-		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
-		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
-	}
-
-	tiles {
-		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-		}
-
-		valueTile("temperature", "device.temperature", inactiveLabel: false) {
-			state "temperature", label:'${currentValue}°',
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:"%"
-		}
-
-		main(["motion", "temperature"])
-		details(["motion", "temperature", "battery"])
-	}
-}
-
-def updated() {
-	if (!device.currentState("ManufacturerCode")) {
-		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-	}
-}
-
-def configure() {
-	log.debug "configure()"
-	def cmds = []
-
-	if (state.sec != 1) {
-		// secure inclusion may not be complete yet
-		cmds << "delay 1000"
-	}
-
-	cmds += secureSequence([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet(),
-		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-	], 500)
-
-	cmds << "delay 8000"
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	return cmds
-}
-
-private getCommandClassVersions() {
-	[
-		0x71: 3,  // Notification
-		0x5E: 2,  // ZwaveplusInfo
-		0x59: 1,  // AssociationGrpInfo
-		0x85: 2,  // Association
-		0x20: 1,  // Basic
-		0x80: 1,  // Battery
-		0x70: 1,  // Configuration
-		0x5A: 1,  // DeviceResetLocally
-		0x7A: 2,  // FirmwareUpdateMd
-		0x72: 2,  // ManufacturerSpecific
-		0x73: 1,  // Powerlevel
-		0x98: 1,  // Security
-		0x31: 5,  // SensorMultilevel
-		0x84: 2	  // WakeUp
-	]
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	def result = []
-	def cmd
-	if (description.startsWith("Err 106")) {
-		state.sec = 0
-		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-	} else if (description.startsWith("Err")) {
-		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
-	} else {
-		cmd = zwave.parse(description, commandClassVersions)
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-
-	if (result instanceof List) {
-		result = result.flatten()
-	}
-
-	log.debug "Parsed '$description' to $result"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
-	log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		return zwaveEvent(encapsulatedCommand)
-	} else {
-		log.warn "Unable to extract encapsulated cmd from $cmd"
-		return [createEvent(descriptionText: cmd.toString())]
-	}
-}
-
-def sensorValueEvent(value) {
-	def result = []
-	if (value) {
-		log.debug "sensorValueEvent($value) : active"
-		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
-	} else {
-		log.debug "sensorValueEvent($value) : inactive"
-		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
-	return sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
-	return sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
-	return sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def result = []
-	if (cmd.notificationType == 0x07) {
-		if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x08) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
-				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
-			} else {
-				result << sensorValueEvent(0)
-			}
-		} else if (cmd.event == 0xFF) {
-			result << sensorValueEvent(1)
-		} else {
-			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
-	def cmds = []
-
-	if (!device.currentState("ManufacturerCode")) {
-		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 2000"
-	}
-	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
-		event.descriptionText += ", requesting battery"
-		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
-		cmds << "delay 800"
-		cmds << secure(zwave.batteryV1.batteryGet())
-		cmds << "delay 2000"
-	} else {
-		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
-	}
-	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
-
-	return [event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	def event = createEvent(map)
-
-	// Save at least one battery report in events list every few days
-	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
-		map.isStateChange = true
-	}
-	state.lastbat = now()
-	return [event]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-	def result = []
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			break;
-		case 3:
-			map.name = "illuminance"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			break;
-		case 5:
-			map.name = "humidity"
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = cmd.scale == 0 ? "%" : ""
-			break;
-		case 0x1E:
-			map.name = "loudness"
-			map.unit = cmd.scale == 1 ? "dBA" : "dB"
-			map.value = cmd.scaledSensorValue.toString()
-			break;
-		default:
-			map.descriptionText = cmd.toString()
-	}
-	result << createEvent(map)
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
-	def productTypeCode = String.format("%04X", cmd.productTypeId)
-	def productCode = String.format("%04X", cmd.productId)
-	def wirelessConfig = "ZWP"
-	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
-	
-	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
-	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
-	result << createEvent(name: "ProductCode", value: productCode)
-	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
-
-	if (manufacturerCode == "0109" && productTypeCode == "2002") {
-		result << response(secureSequence([
-			// Change re-trigger duration to 1 minute
-			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
-			zwave.batteryV1.batteryGet(),
-			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
-		], 400))
-	}
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
-}
-
-private secure(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 0) {  // default to secure
-		cmd.format()
-	} else {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	}
-}
-
-private secureSequence(commands, delay=200) {
-	delayBetween(commands.collect{ secure(it) }, delay)
-}

smartapps/-/-.src/-.groovy

@@ -0,0 +1,50 @@
+/**
+ *  이혜진
+ *
+ *  Copyright 2016 Leehyejin
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "이혜진",
+    namespace: "이혜진",
+    author: "Leehyejin",
+    description: "test",
+    category: "",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/prempoint-com/prempoint.src/prempoint.groovy

@@ -0,0 +1,345 @@
+/**
+ *  SmartThings service for Prempoint
+ *
+ *  Author: Prempoint Inc. (c) 2016
+ *   
+ */
+definition(
+    name: "Prempoint",
+    namespace: "prempoint.com",
+    author: "Prempoint Inc.",
+    description: "SmartThings service for Prempoint",
+    category: "Connections",
+    iconUrl: "http://www.prempoint.com/images/social_app_emblem_50x50.png",
+    iconX2Url: "http://www.prempoint.com/images/social_app_emblem_100x100.png",
+    iconX3Url: "http://www.prempoint.com/images/social_app_emblem_150x150.png",
+    oauth: [displayName: "Prempoint", displayLink: "http://www.prempoint.com/"])
+
+preferences {
+	section("Allow Prempoint to Control & Access These Things...") {
+		input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+        input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
+        input "garagedoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
+        //input "doors", "capability.doorControl", title: "Which Doors?", multiple: true, required: false
+        input "cameras", "capability.imageCapture", title: "Which Cameras?", multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/list") {
+		action: [
+			GET: "listDevices"
+		]
+	}
+	path("/switches") {
+		action: [
+			GET: "listSwitches"
+		]
+	}
+	path("/switches/:id") {
+		action: [
+			GET: "showSwitch"
+		]
+	}
+    path("/switches/:id/:command") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/switches/:id/:command/:level") {
+		action: [
+			GET: "updateSwitch"
+		]
+	}
+	path("/locks") {
+		action: [
+			GET: "listLocks"
+		]
+	}
+	path("/locks/:id") {
+		action: [
+			GET: "showLock"
+		]
+	}
+	path("/locks/:id/:command") {
+		action: [
+			GET: "updateLock"
+		]
+	}
+    path("/doors/:id") {
+		action: [
+			GET: "showDoor"
+		]
+	}
+   	path("/doors/:id/:command") {
+		action: [
+			GET: "updateDoor"
+		]
+	}
+	path("/garagedoors/:id") {
+		action: [
+			GET: "showGarageDoor"
+		]
+	}
+   	path("/garagedoors/:id/:command") {
+		action: [
+			GET: "updateGarageDoor"
+		]
+	}
+    path("/cameras/:id") {
+		action: [
+			GET: "showCamera"
+		]
+	}  
+    path("/cameras/:id/:command") {
+		action: [
+			GET: "updateCamera"
+		]
+	}  
+}
+
+def installed() {}
+
+def updated() {}
+
+def listDevices() {
+	log.debug "entering listDevices"
+    //return listSwitches() + listLocks() + listGarageDoors() + listDoors() + listCameras()
+    return listSwitches() + listLocks() + listGarageDoors() + listCameras()
+}
+
+//switches
+def listSwitches() {
+    log.debug "entering listSwitches"
+	switches.collect{showDevice(it,"switch")}
+}
+
+def showSwitch() {
+	log.debug "entering showSwitches"
+	show(switches, "switch")
+}
+
+def updateSwitch() {
+	log.debug "entering updateSwitches"
+	update(switches, "switch")
+}
+
+//locks
+def listLocks() {
+	log.debug "entering listLocks"
+	locks.collect{showDevice(it,"lock")}
+}
+
+def showLock() {
+	log.debug "entering showLock"
+	show(locks, "lock")
+}
+
+def updateLock() {
+	log.debug "entering updateLock"
+	update(locks, "lock")
+}
+
+//doors
+def listDoors() {
+	log.debug "entering listDoors"
+	locks.collect{showDevice(it,"door")}
+}
+
+def showDoor() {
+	log.debug "entering showDoors"
+	show(doors, "door")
+}
+
+def updateDoor() {
+	log.debug "entering updateDoor"
+	update(doors, "door")
+}
+
+//garagedoors
+def listGarageDoors() {
+	log.debug "entering listGarageDoors"
+	locks.collect{showDevice(it,"garagedoor")}
+}
+
+def showGarageDoor() {
+	log.debug "entering showGarageDoors"
+	show(garagedoors, "garagedoor")
+}
+
+def updateGarageDoor() {
+	log.debug "entering updateGarageDoor"
+	update(gargedoors, "garagedoor")
+}
+
+//cameras
+def listCameras() {
+	log.debug "entering listCameras"
+	cameras.collect{showDevice(it,"image")}
+}
+
+def showCamera() {
+	log.debug "entering showCameras"
+	show(cameras, "camera")
+}
+
+def updateCamera() {
+	log.debug "entering updateCamera"
+	update(cameras, "camera")
+}
+
+def deviceHandler(evt) {}
+
+private update(devices, type) {
+	def rc = null
+
+	//def command = request.JSON?.command
+    def command = params.command
+    
+    log.debug "update, request: params: ${params}, devices: $devices.id type=$type command=$command"
+    
+    // Process the command.
+	if (command) 
+    {
+		def dev = devices.find { it.id == params.id }
+		if (!dev) {
+			httpError(404, "Device not found: $params.id")
+		} else if (type == "switch") {
+			switch(command) {
+			    case "on":
+			    	rc = dev.on()
+			    	break
+			    case "off":
+			    	rc = dev.off()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "lock") {
+			switch(command) {
+			    case "lock":
+			    	rc = dev.lock()
+			    	break
+			    case "unlock":
+			    	rc = dev.unlock()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device:=$it.id $dev")
+			}
+		} else if (type == "door") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "garagedoor") {
+			switch(command) {
+			    case "open":
+			    	rc = dev.open()
+			    	break
+			    case "close":
+			    	rc = dev.close()
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		} else if (type == "camera") {
+			switch(command) {
+			    case "take":
+			    	rc = dev.take()
+			    	log.debug "Device command=$command device=$it.id $dev current image=$it.currentImage"
+			    	break
+			    default:
+			    	httpError(400, "Device command=$command is not a valid for device=$it.id $dev")
+			}
+		}
+
+		log.debug "executed device=$it.id $dev command=$command rc=$rc"
+        
+        // Check that the device is a switch that is currently on, supports 'setLevel"
+        // and that a level was specified.
+        int level = params.level ? params.level as int : -1;
+        if ((type == "switch") && (dev.currentValue('switch') == "on") && hasLevel(dev) && (level != -1)) {            
+            log.debug "device about to setLevel=$level"
+            dev.setLevel(level);
+        }
+        
+        // Show the device info if necessary.
+        if (rc == null) {
+        	rc = showDevice(dev, type)
+        }
+	}
+    
+    return rc
+}
+
+private show(devices, type) {
+	def dev = devices.find { it.id == params.id }
+	if (!dev) {
+		httpError(404, "Device not found")
+	} else { 
+        // Show the device info.
+        showDevice(dev, type)
+	}
+}
+
+private showDevice(it, type) {
+	def props = null
+
+	// Get the current state for the device type.
+	def state = [it.currentState(type)]
+    
+	// Check that whether the a switch device with level support is located and update the returned device type.
+    def devType =  type
+    
+    if (type == "switch" && hasLevel(it)) {
+    	// Assign "switchWithLevel" to device type.
+    	devType = "switchWithLevel"
+        // Add the level state.
+        def levelState = it.currentState("level")
+        if (levelState) {
+        	state.add(levelState)
+        }
+    }
+    
+    log.debug "device label=$it.label type=$devType"
+    
+    // Assign the device item properties if appropriate.
+    if (it) {
+    	props = [id: it.id, label: it.label, type: devType, state: state]
+        // Add the hub information to the device properties
+        // if appropriate.
+        if (it.hub) {
+        	props.put("location", it.hub.hub.location)
+        }
+        if (it.currentImage) {
+        	props.put("currentImage", it.currentImage)
+        }
+    }
+    
+    return props
+}
+
+private hasLevel(device) {
+    // Default return value.
+    def rc = false;
+
+	// Get the device supported commands.
+    def supportedCommands = device.supportedCommands
+    
+    // Check to see if the "setLevel" was found and assign
+    // the appropriate return value.
+    if (supportedCommands) {
+        // Find the "setLevel" command. 
+        rc = supportedCommands.toString().indexOf("setLevel") != -1
+    }
+    
+    log.debug "hasLevel device label=$device.label supportedCommands=$supportedCommands rc=$rc"
+            
+    return rc
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,7 +39,6 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
-	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -48,9 +47,6 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
-				if (dimmersContainUnsupportedDevices()) {
-					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
-				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -75,31 +71,6 @@ def rootPage() {
 	}
 }
 
-def unsupportedDevicesPage() {
-
-	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
-
-	dynamicPage(name: "unsupportedDevicesPage") {
-		if (unsupportedDimmers) {
-			section("These devices do not support the setLevel command") {
-				unsupportedDimmers.each {
-					paragraph deviceLabel(it)
-				}
-			}
-			section {
-				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
-			}
-			section {
-				paragraph "If you think there is a mistake here, please contact support."
-			}
-		} else {
-			section {
-				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
-			}
-		}
-	}
-}
-
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -557,16 +528,14 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
+			def canChangeColors = hasSetColorCommand(dimmer)
 
-			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
-				def hue = getHue(dimmer, nextLevel)
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
-				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
-			} else if (hasSetLevelCommand(dimmer)) {
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
-				dimmer.setLevel(nextLevel)
+			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
+
+			if (shouldChangeColors && canChangeColors) {
+				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
 			} else {
-				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
+				dimmer.setLevel(nextLevel)
 			}
 
 		}
@@ -720,7 +689,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -848,21 +817,24 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
-private dimmersContainUnsupportedDevices() {
-	def found = dimmers.find { hasSetLevelCommand(it) == false }
-	return found != null
-}
-
 private hasSetLevelCommand(device) {
-	return hasCommand(device, "setLevel")
+	def isDimmer = false
+	device.supportedCommands.each {
+		if (it.name.contains("setLevel")) {
+			isDimmer = true
+		}
+	}
+	return isDimmer
 }
 
 private hasSetColorCommand(device) {
-	return hasCommand(device, "setColor")
-}
-
-private hasCommand(device, String command) {
-	return (device.supportedCommands.find { it.name == command } != null)
+	def hasColor = false
+	device.supportedCommands.each {
+		if (it.name.contains("setColor")) {
+			hasColor = true
+		}
+	}
+	return hasColor
 }
 
 private dimmersWithSetColorCommand() {
@@ -1101,4 +1073,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -30,7 +30,6 @@ definition(
 preferences {
 	page(name:"mainPage", title:"Hue Device Setup", content:"mainPage", refreshTimeout:5)
 	page(name:"bridgeDiscovery", title:"Hue Bridge Discovery", content:"bridgeDiscovery", refreshTimeout:5)
-	page(name:"bridgeDiscoveryFailed", title:"Bridge Discovery Failed", content:"bridgeDiscoveryFailed", refreshTimeout:0)
 	page(name:"bridgeBtnPush", title:"Linking with your Hue", content:"bridgeLinking", refreshTimeout:5)
 	page(name:"bulbDiscovery", title:"Hue Device Setup", content:"bulbDiscovery", refreshTimeout:5)
 }
@@ -54,21 +53,12 @@ def bridgeDiscovery(params=[:])
 	def options = bridges ?: []
 	def numFound = options.size() ?: 0
 
-	if (numFound == 0) {
-		if (state.bridgeRefreshCount == 25) {
-			log.trace "Cleaning old bridges memory"
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-		} else if (state.bridgeRefreshCount > 100) {
-			// five minutes have passed, give up
-			// there seems to be a problem going back from discovey failed page in some instances (compared to pressing next)
-			// however it is probably a SmartThings settings issue
-			state.bridges = [:]
-			app.updateSetting("selectedHue", "")
-			state.bridgeRefreshCount = 0
-			return bridgeDiscoveryFailed()
-		}
-	}
+	if (numFound == 0 && state.bridgeRefreshCount > 25) {
+    	log.trace "Cleaning old bridges memory"
+    	state.bridges = [:]
+        state.bridgeRefreshCount = 0
+        app.updateSetting("selectedHue", "")
+    }
 
 	ssdpSubscribe()
 
@@ -89,13 +79,6 @@ def bridgeDiscovery(params=[:])
 	}
 }
 
-def bridgeDiscoveryFailed() {
-	return dynamicPage(name:"bridgeDiscoveryFailed", title: "Bridge Discovery Failed", nextPage: "bridgeDiscovery") {
-		section("Failed to discover any Hue Bridges. Please confirm that the Hue Bridge is connected to the same network as your SmartThings Hub, and that it has power.") {
-		}
-	}
-}
-
 def bridgeLinking()
 {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
@@ -105,15 +88,19 @@ def bridgeLinking()
 	def nextPage = ""
 	def title = "Linking with your Hue"
     def paragraphText
+    def hueimage = null
 	if (selectedHue) {
 		paragraphText = "Press the button on your Hue Bridge to setup a link. "
+        hueimage = "http://huedisco.mediavibe.nl/wp-content/uploads/2013/09/pair-bridge.png"
     } else {
     	paragraphText = "You haven't selected a Hue Bridge, please Press \"Done\" and select one before clicking next."
+        hueimage = null
     }
 	if (state.username) { //if discovery worked
 		nextPage = "bulbDiscovery"
 		title = "Success!"
 		paragraphText = "Linking to your hub was a success! Please click 'Next'!"
+        hueimage = null
 	}
 
 	if((linkRefreshcount % 2) == 0 && !state.username) {
@@ -123,6 +110,8 @@ def bridgeLinking()
 	return dynamicPage(name:"bridgeBtnPush", title:title, nextPage:nextPage, refreshInterval:refreshInterval) {
 		section("") {
 			paragraph """${paragraphText}"""
+            if (hueimage != null)
+            	image "${hueimage}"
 		}
 	}
 }
@@ -146,14 +135,13 @@ def bulbDiscovery() {
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
-	def selectedBridge = state.bridges.find { key, value -> value?.serialNumber?.equalsIgnoreCase(selectedHue) }
-	def title = selectedBridge?.value?.name ?: "Find bridges"
 
 	return dynamicPage(name:"bulbDiscovery", title:"Bulb Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
 		section {
+			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
 		}
@@ -360,29 +348,26 @@ def addBulbs() {
 			def newHueBulb
 			if (bulbs instanceof java.util.Map) {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
-
-				if (newHueBulb != null) {
-					d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
+                if (newHueBulb != null) {
+                    d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
 					if (d) {
 						log.debug "created ${d.displayName} with id $dni"
-						d.completedSetup = true
 						d.refresh()
 					}
-				} else {
-					log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
-				}
+                } else {
+                	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
+                }
 			} else {
-			 	//backwards compatable
+            	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.completedSetup = true
 				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
 				// Update device type if incorrect
-				def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
+            	def newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
 				upgradeDeviceType(d, newHueBulb?.value?.type)
 			}
 		}
@@ -414,7 +399,6 @@ def addBridge() {
             }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
-				d?.completedSetup = true
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
                 def childDevice = getChildDevice(d.deviceNetworkId)
                 childDevice.sendEvent(name: "serialNumber", value: vbridge.value.serialNumber)
@@ -502,21 +486,7 @@ void bridgeDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
 		def bridges = getHueBridges()
 		def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
 		if (bridge) {
-			// serialNumber from API is in format of 0017882413ad (mac address), however on the actual bridge only last six
-			// characters are printed on the back so using that to identify bridge
-			def idNumber = body?.device?.serialNumber?.text()
-			if (idNumber?.size() >= 6)
-				idNumber = idNumber[-6..-1].toUpperCase()
-
-			// usually in form of bridge name followed by (ip), i.e. defaults to Philips Hue (192.168.1.2)
-			// replace IP with serial number to make it easier for user to identify
-			def name = body?.device?.friendlyName?.text()
-			def index = name?.indexOf('(')
-			if (index != -1) {
-				name = name.substring(0,index)
-				name += " ($idNumber)"
-			}
-			bridge.value << [name:name, serialNumber:body?.device?.serialNumber?.text(), verified: true]
+			bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
 		} else {
 			log.error "/description.xml returned a bridge that didn't exist"
 		}
@@ -689,7 +659,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +800,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+    
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-
+    
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)
+        if (huesettings.saturation != null)   
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-
-    // Default behavior is to turn light on
+    
+    // Default behavior is to turn light on 
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +823,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else
+        else 
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,73 +658,29 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
+
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-    if (device) {
-        if (validateCommand(device, command)) {
-            if (arguments) {
-                device."$command"(*arguments)
-            } else {
-                device."$command"()
-            }
-            render status: 204, data: "{}"
-        } else {
-          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
-        }
-    } else {
-      render status: 404, data: '{"msg": "Device not found"}'
-    }
-  }
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(device)
-	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
+		if (device) {
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
+			}
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
+		}
 	}
 }
 
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(device) {
-    def capName = ""
-    if (switches.find{it.id == device.id})
-			capName = "Switch"
-		else if (alarms.find{it.id == device.id})
-			capName = "Alarm"
-		else if (locks.find{it.id == device.id})
-			capName = "Lock"
-    log.trace "Device: $device - Capability Name: $capName"
-		return capName
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -823,33 +779,18 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
-  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-  	sendHubCommand(new physicalgraph.device.HubAction(
-  		method: "POST",
-  		path: path,
-  		headers: [
-  			"Host": host,
-  			"Content-Type": "application/json"
-  		],
-  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-  	))
-  } else {
-    def params = [
-      uri: callbackUrl,
-      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-    ]
-    try {
-        log.debug "Sending data to Harmony Cloud: $params"
-        httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
-        }
-    } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
-    }
-  }
+	def callback = new URI(callbackUrl)
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
+		path: path,
+		headers: [
+			"Host": host,
+			"Content-Type": "application/json"
+		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
 }
 
 def listHubs() {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,89 +92,24 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	def type = params.param1
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command) {
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	def type = params.param1
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-
 	if (command) {
-		executeCommand(device, type, command)
+		def device = devices.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
-}
-
 private show(devices, name) {
 	def device = devices.find { it.id == params.id }
 	if (!device) {